Product Range. Butterfly Valve Type
|
|
|
- Belinda Carmella Francis
- 5 years ago
- Views:
Transcription
1 Prouct Range Butterfly Valve Type 567
2 ist of Abbreviations ANSI American National Stanar Institute ASTM American Society for Testing an Materials BS British Stanar IN eutsche Inustrie-Normen ISO International Stanarization Organization ABS Acrylnitrile-Butaiene-Styrene PVC-U Polyvinyl chlorie, unplasticize PVC-C Polyvinyl chlorie, post-chlorinate PP- Polypropylene, omopolymerie PE Polyethylene PVF Polyvinyliene fluorie EPM Ethylene-Propylene-Rubber Fluororubber, e.g. Viton PTFE Polytetrafluoroethylene, e.g. Teflon Pipe outer iameter N Nominal iameter PN Nominal pressure at 20 C, water kg Weight in kilograms Registere traemark The technical ata are not bining an not expressly warrante characteristics of the goos. They are subject to change. Our General Conitions of Sale apply. imensions All imensions are given in mm.
3 Table of Contents The new Butterfly Valve Type 567 Butterfly Valve Type 567 PVC-U bare shaft 5 with han lever/with reuction gear 6 with han lever, silicone free version 8 with electric actuator type with pneumatic actuator type Butterfly Valve Type 567 PVC-C bare shaft 16 with han lever/with reuction gear 17 with electric actuator type with pneumatic actuator type Butterfly Valve Type 567 ABS bare shaft 26 with han lever/with reuction gear 27 with electric actuator type with pneumatic actuator type Butterfly Valve Type 567 PP- bare shaft 36 with han lever/with reuction gear 37 with han lever, silicone free version 39 with electric actuator type with pneumatic actuator type Butterfly Valve Type 567 SYGEF Stanar bare shaft 47 with han lever/with reuction gear 48 with electric actuator type with pneumatic actuator type Assembly parts 57 Flange aaptor 62 Position inicator 72 Spare parts 74
4 A winner in every etail lockable ergonomic esign stanar interface conforms to ISO 5211 integrate electric position inicator (optional) stanar 5 ratchet setting (fine ajustment as option) ouble eccentric operating principle isc, inner boy an bearing bushes mae of the same material as the pipeline optimize moular components ouble internal shaft sealing on both sies O-rings seal to the connecting element profile seal in the passage
5 PVC-U, PVC-C, ABS, or -PP- an PVF. Our stanar sealing materials are EPM an, but other materi- als are available on request. lities. We can offer you, for example, manual valves with han lever or reuction gear. The program also inclues pneumatically or electri- Stanar ug-type butterfly valve/ en installation Type 568 Stanar Wafer-type butterfly valve Type 567 Butterfly valve with fine ajustment You also have a choice of materials: interesting combination possibi- The new butterfly valves type solution for your application. sure of having the best possible to choose from you can always be With this wie range of proucts JIS (only wafer-type valves) inch: BS, ASTM metric: IN, EN, ISO Butterfly valve with reuction gear Butterfly valve with pneumatic actuator ouble acting; optional manual overrie IBt, NSF61, TA uft Approvals pening: valves correspons to EN558 Face-to-face length of butterfly EN558 test methos an requirements Thermoplastic valves pressure ISO9393 in thermoplastic materials Inustrial valves butterfly valves pren ISO Butterfly valve with pneumatic actuator single acting following international stanars: Piping Systems conform to the easily an at very little expense. ge of proucts an a multitue of 567/568 from Georg Fischer iviual system components fast, valves with a comprehensive ran- pipe stanars are supplie: All the customary installation N300. principle allows you to exchange in- 567/568 type series of butterfly cally actuate valves from N50 to Our system s moular esign Georg Fischer presents the new One system - many options Butterfly valve with electric actuator; optional manual overrie an electric position inicator
6 Strong features for strong arguments Now in the material PVF available igher nominal pressure by improve esign stanar interface per ISO 5211 isc, inner boy an bearing bushes mae of the same material as the pipeline. Your benefit: better resistance to corrosion robust outer boy of PP-GF 30; connecting imensions accoring to ISO, BS, ANSI, JIS optimize moular components: profile seal in the passage special seal to the connecting element ouble eccentric operating principle
7 Butterfly valves PVC-U Butterfly valve type 567 PVC-U Bare shaft Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 Ï Interface F07 for the imensions N accoring to IN/ISO 5211 Ï Interface F10 for the imensions N accoring to IN/ISO 5211 N EPM Coe Coe /
8 Butterfly valve type 567 PVC-U an lever with ratchet settings Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 Ï We recommen for the imensions N250 an N300 only 6 bar maximum system pressure for the han lever version N EPM Coe Coe /
9 Butterfly valve type 567 PVC-U Reuction gear with hanwheel Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 N EPM Coe Coe /
10 Butterfly valves PVC-U SF Butterfly valve type 567 PVC-U SF an lever with ratchet settings Moel: Ï Silicon-free / paint-compatible Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 Available from secon quarter 2006 N EPM Coe Coe /
11 Butterfly valves electric PVC-U Butterfly valve type 140 PVC-U V Without manual overrie Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 Ï Voltage V, z Ï Control time 15 s/90 <) EA31 Ï Control time 25s/90 <) EA42 Ï Control range 90 <) Ï Actuator with integrate emergency manual overrie stanar N EPM Coe Coe / Actuator unit type EA EA EA EA EA EA EA EA
12 Butterfly valve type 140 PVC-U V With manual overrie Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 Ï Voltage V, z Ï Control time 15 s/90 <) EA31 Ï Control time 25s/90 <) EA42 Ï Control range 90 <) Ï Actuator with integrate emergency manual overrie stanar N EPM Coe Coe / Actuator unit type EA EA EA EA EA EA EA
13 Butterfly valve type 140 PVC-U 24V Without manual overrie Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 Ï Voltage 24 V AC/C Ï Control time 15 s/90 <) EA31 Ï Control time 25s/90 <) EA42 Ï Control range 90 <) Ï Actuator with integrate emergency manual overrie stanar Ï The imension N300 on request N EPM Coe Coe / Actuator unit type EA EA EA EA EA EA EA EA
14 Butterfly valve type 140 PVC-U 24V With manual overrie Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 Ï Voltage 24 V AC/C Ï Control time 15 s/90 <) EA31 Ï Control time 25s/90 <) EA42 Ï Control range 90 <) Ï Actuator with integrate emergency manual overrie stanar N EPM Coe Coe / Actuator unit type EA EA EA EA EA EA EA
15 Butterfly valves pneumatic PVC-U Butterfly valve type 240 PVC-U FC (Fail safe to close) Without manual overrie Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 Ï Control range 90 <) N EPM Coe Coe / Actuator unit type PA-30 FC PA-30 FC PA-35 FC PA-40 FC PA-45 FC PA-50 FC PA-55 FC PA-65 FC PA-70 FC
16 Butterfly valve type 240 PVC-U FO (Fail safe to open) Without manual overrie Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 Ï Control range 90 <) N EPM Coe Coe / Actuator unit type PA-30 FO PA-30 FO PA-35 FO PA-40 FO PA-45 FO PA-50 FO PA-55 FO PA-65 FO PA-70 FO
17 Butterfly valve type 240 PVC-U A (ouble acting) Without manual overrie Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length accoring to EN 558-1, ISO 5752 Ï Control range 90 <) N EPM Coe Coe / Actuator unit type PA-35 A PA-35 A PA-40 A PA-45 A PA-45 A PA-55 A PA-55 A PA-65 A PA-70 A
Product Range. Butterfly Valve Type 567
Prouct Range Butterfly Valve Type 567 Butterfly valves SYGEF SYGEF stanar Butterfly valve type 567 PVF Bare shaft Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length
GF Piping Systems Datasheet Ball Valves
Type 546 Ball Valve PROGEF Stanar With butt fusion spigots IR-Plus oel: aterial: PP- esigne for easy installation an removal Ball seals PTFE Integrate stainless steel mounting inserts z-imension, valve
Product Range. The new generation of diaphragm valves
Prouct Range The new generation of iaphragm valves Benefits You can expect a great eal more from the new generation of iaphragm valves: ore safety, simplicity an efficiency. It began with the wish for
Product Range. The new generation of diaphragm valves
Prouct Range The new generation of iaphragm valves Benefits You can expect a great eal more from the new generation of iaphragm valves: ore safety, simplicity an efficiency. It began with the wish for
Product Range Export April PVC-U piping systems for industrial application. Pipe, Fittings, Valves and Accessories
Prouct Range Export April 2006 PVC-U piping systems for inustrial application Pipe, Fittings, Valves an Accessories 40 Years of Application Know ow Approvals PVC-U ebensmittelzulassung lebensmittelecht
GF Piping Systems Datasheet Ball Valves
atasheet Type 546 Ball Valve Stanar PVF With butt fusion spigots metric oel: aterial: PVF esigne for easy installation an removal Integrate stainless steel mounting inserts -imension, valve en an union
Poly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
Section 5. SYGEF Standard PVDF Piping System. Effective Jan. 16, See for updated info. P
Section 5 SYGEF Stanar PVF Piping System P0801084 Effective Jan. 16, 2012. See www.gfpiping.com for upate info. SYGEF Stanar Prouct Specification Material Color ensity Surface tension inear expansion coefficient
Technical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
Technical information and product range. metric. 3-way ball valve with electrical or pneumatic actuator
Technical information an prouct range metric 3-way ball valve with electrical or pneumatic actuator General Prouct overview type PVC-U PVC-C ABS PP-H SYGEF L T horizontal vertical EA21 PA11 site Stanar
PVC AND CPVC PRESSURE PIPES ASTM D-1785 and F-441 Schedule 80
2 PVC AN CPVC PRESSURE PIPES ASTM -1785 an F-441 Scheule 80 PVC ASTM 1785 SCHEULE 80 NOMINAL OUTSIE IAMETER PVC SCHEULE 80 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM PSI @73F LB/FT 10022 1/8
Type 567. Wafer Style Butterfly Valve
Wafer Style Butterfly Valve Type 5 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 stainless steel Operation:
ASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
Lug Style Butterfly Valve Type 578
Lug Style Butterfly Valve Type 58 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 Stainless steel Lugs:
K-Factor. Global Installation Fittings and K-Factors. Global
K-Factor Global Installation Fittings an K-Factors Global K-Factor CD Table of Contents 5 6 7 8 13 14 21 22 27 28 35 36 37 38 39 40 47 48 49 50 51 52 59 60 61 62 63 64 65 66 67 68 79 80 81 82 83 84 91
Type 147. Electrically Actuated Lug Butterfly Valve
GF Piping Systems Electrically Actuated Lug Butterfly Valve Type 147 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM
Pressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV DIBt* approve DIBt* approve High repeating accuracy, with union sockets or spigot ens Print / The optimal monitoring valves Sizes up to Operating
k v max 1) [m 3 /h] [mm]
![k v max 1) [m 3 /h] [mm]](/thumbs/92/110251352.jpg "k v max 1) [m 3 /h] [mm]")
Technical ata sheet D6..N Wafer type butterfly valves, for shut-off functions in open an close col an hot water systems for switching heating an cooling machines on an off Overview of types Type k v max
COMPANY PROFILE. Our products have been supplied to local and foreign customers for the following industries:
CECK VAVES COMPANY PROFIE The company ARMATURY Group a.s. is a leaing Czech manufacturer an istributor of inustrial valves, fittings an control systems for valves. The annual prouction is of more than
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator
Volute Centrifugal Pumps PN 16 / PN 25 for Heat Transfer Media Thermal Oil up to 350 C Hot Water up to 204 C. Series NTWH/CTWH process model
Volute Centrifugal s PN 16 / PN 25 for Heat Transfer Meia Thermal Oil up to 350 C Hot Water up to 20 C Series NTWH/CTWH process moel Series NTWH/CTWH Series NBWH/CBWH block moel Series NIWH/CIWH in-line
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
+GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE +GF+ PNEUMATIC ACTUATED BALL VALVE 3-16
+GF+ PNEUMATIC ACTUATED BALL VALVE Type 21/2 2-way True Union Pneumatically actuated ball valve for aggressive fluids and industrial applications. Based on the new Type 546 ball valve, the Type 21-2 uses
Variable area flowmeter DFM 165 to 350
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High
Rotameters Rotameters
Rotameters Type 807 Rotameter - Polyamie omplete Assembly PV Socket Ens, EPDM Seals, Stanar Tube Stanar Float 98 807 622 ^ 98 807 60 ^ 0.22-2.20 98 807 62 ^ 98 807 6 ^ 0.44-4.40 2 98 807 624 ^ 98 807 62
Rotameters. Variable Area Flow Meters
Variable Area Flow Meters Rotameters General Size: ⅜ 2½ Total Flow Range:. 264 gpm Tube Material: PA, PSU, PVC transparent Seal: EPDM, FPM Float: PVDF, PVDF-HP transparent En Connection: Solvent cement
Butterfly valves. SIL safety. SALES SERVICE +358 (0) DOUBLE ECCENTRIC
SALES SERVICE +358 (0)17 262 3555 info@econosto.fi Butterfly valves OUBLE ECCENTRIC butterfly valves are specifically designed for high demanding applications where the valve performance is critical. Available
PRODUCTS FOR THE HYDRAULICS INDUSTRY
PROUCTS FOR THE HYRAULICS INUSTRY SPIRALGUAR SPIRALGUAR High Performance Hose an Cable Protection How to calculate quantity: Outsie iameter of hose Length (m) of hose Insie iameter of Spiralguar X to be
Manual & Actuated Valves
GF Piping Systems Manual & Actuated Valves Technical Catalogue Issue 1 General Information The best choice Corrosion and chemical resistant products, systems and complete solutions from GF Piping Systems
Quick-change adapters, positive drive inch sizes
P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
Slewing Ring Bearings
Slewing Ring Bearings Wafangian Weiyuan Bearing Manufacturings Co.,Lt. Wafangian Weiyuan Bearing Manufacturings Co.,Lt. A: huhua Inustrial Park,Wafangian,alian,China el:+86-411-85584788 Fax:+86-411-85584896
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
VKD DualBlock 2-way Ball Valve
The VKD DualBlock ball valve is a fully unionised valve that stands up to the most severe industrial applications. Size range from /" / d6mm up to 2" / d6mm Pressure rating: Maximum working pressure: 6
HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
C 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
introduction FK Series Butterfly Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D4101-86 ASTM D1784 ASTM D3222 IPEX FK Series Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments and process
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
ISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
Ball Valves George Fischer Type 353, 354, 355 COLORO Ball Valves. Technical Features
Ball Valves George Fischer Type 5, 54, 55 COLORO Ball Valves The George Fischer Type 5, 54, and 55 plastic ball valves feature: monobloc structure provides high safety level: user cannot dissassemble or
R o L. BUTTERFLY VALVE of carbon steel with flanges series BLUE LINE. Operation. Edition
of carbon steel 31500 series C ont R o L Operation Edition 03-0-009 The welded butterfly valve 31500 is used for example in district heating, district cooling and industry. It can be used as an on-off
Type Electrically Actuated Ball Valve
GF Piping Systems Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement
Fittings & Accessories for Water Pipe 2018 Price Catalogue
Fittings & Accessories for Water Pipe 2018 Price Catalogue www.plasson.co.uk 2about us Here at PASSON we continually strive to evelop an expan our range of fittings reflecting our ongoing strategy to eliver
Material Specification PVC valves shall meet ASTM D1784 cell classification 124 standards. CPVC valves shall meet ASTM D1784 cell classification 23447
Electrically Actuated Lug Butterfly Valve Type 147 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 316
Type 145. Electrically Actuated Wafer Butterfly Valve
Electrically Actuated Wafer Butterfly Valve Type 1 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 316
FK Series Butterfly Valves Product Data Sheet
< STANDARDS > ASTM D4101-86 ASTM D1784 ASTM D3222 IPEX FK Series Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments and process flow conditions. The special
introduction FE Series Butterfly Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 IPEX FE Series Butterfly Valves incorporate many features of our industrial FK valve, yet the all PVC construction and EPDM liner make this valve
Series EPDM Seat. Ductile Iron Body, 316 SS, Lug Type Butterfly Valve. Lug-EPDM
Series 600 - EPM Seat Lug Type backed EPM seats. Accompanied by a precision machined 316 SS disc, it offers low operating torque, Lug-EPM Model 600 Series s are epoxy coated with extended neck which makes
F3.00 Paddlewheel Flow Sensor INSTRUCTION MANUAL. 1. Introduction Safety Instructions Unpacking Description..
INSTRUCTION MANUAL EN 10-11 Table of Contents 1. Introuction 2 1.1. Safety Instructions.. 2 1.2. Unpacking. 2 2. Description.. 3 2.1. Design.... 3 2.2. Technical Features.. 3 2.3. Operating Principle...
FAX FAX
2 seals on eman HERCULES SEALS ON EMAN provies a wie selection of custom, cost effective sealing solutions using avance rapi-prototype technology. The programmable CNC prouction cell can manufacture both
Variable Area Flow Meters Type 335, Type 350 Short Version Special Version. Product Range
Prouct Range Variable Area Flow Meters Type 335, Type 350 Short Version Special Version icenta Controls Lt, Unit 3 The Woofor Centre, Lysaner Way, Ol Sarum Park, Salisbury, SP4 6BU, UK Tel: +44 (0)1722
FULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
Capillary Thermometers according to DIN Nitrogen Filled Option: Contacts
Capillary Thermometers accoring to DIN 16206 Nitrogen Fille Option: Contacts measuring monitoring analysing Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
Pipe bracket spacing and support of pipelines
Pipe an support of pipelines General Pipe support for plastics pipes Plastic pipe systems shoul be installe using supports esigne for use with plastics an shoul then be installe taking care not to amage
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
Bimetal thermometers Index
Inex eneral information Prouct information With brass pocket page Inex 685 Brass pocket; Aluminium case 686 Brass pocket; 687 With brass probe page Brass probe; Aluminium case; Air uct thermometer 688
Ø range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
Angular contact ball bearings
Angular contact ball bearings 7200 BE CB Y HC5 Nomenclature 1 2 3 4 1. esign: 2. Clearance: 3. Cage esigns: B BE A E NR N2 2Z 2RS1 40 contact angle 40 contact angle, high capacity, all ISO corners Conra
CAST STEEL FLOATING BALL VALVE
CAST STEEL FLOATING BALL VALVE Stanar an Prouct Range Technical Innovation Design an Inspection Stanar: Pressure-Temperature Ratings Shell Wall Thickness Flange Face-to-face Dimensions Socket Wel & NPT
On the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
VSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve
M M Series BFII BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve Publication 504-106 Issue 06/12 Design Features General All AWWA Butterfly Valves are of
VXE Easyfit 2-way Ball Valve (DN15 - DN50)
The Durapipe Easyfit valve allows customers to brand or label the valve through specialist software that is provided with the product. This innovative technology means that companies can easily own-brand
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
DOULE-ECCENTRIC UTTERFLY VALVES TYPE L32.7 Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through
Targeted technology and know-how. The new butterfly valves type 567 and 568
Targeted technology and know-how The new butterfly valves type 567 and 568 A winner in every detail lockable ergonomic design standard interface conforms to ISO 5211 integrated electric position indicator
HV gate valve with protective ring Series 17
HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
FK DN PVC-U Butterfly valve
.co.th FK DN 40 300 PVC-U Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
Deep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
Shyam Enterprises 5 HEAT EXCHANGERS
Shyam Enterprises HEAT EXCHANGERS 33 Heat Exchangers Introuction The overall heat transfer coefficient of borosilicate glass equipment compare favourably with many alternative process plant construction
introduction VKD Series Automated Ball Valves Product Data Sheet < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM D4101 ASTM F1498 ASTM F437 ASTM F439 IPEX VKD Series Automated Ball Valves offer a variety of advanced features
BFV : 14 : 10 : 12 BUTTERFLY VALVE
BFV : 14 : 10 : 12 BUTTERFLY VALVE Looks Like Conventional Butterfly Valve... 2 FEATURES HIGHER Cv Larger disc for larger flow Improved profile of disc provides minimum Resistance to flow BOTTOM STEM Stem
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Other materials are available on request. Operating conditions
Merkel U-Ring T 18 Merkel U-Ring T 18 Asymmetrical sealing lip POM back-up ring PUR profile ring Profile ring Coe Harness Polyurethane 95 AU V142 95 Shore A Fig. 1 Merkel U-Ring T 18 Back-up ring Polyacetal
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
FK Series Automated Butterfly Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D3222 ASTM D4101 IPEX FK Series Automated Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments
High-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
Electrofusion Fittings & Specialist Tooling
Electrofusion Fittings & Specialist Tooling September 2016 (4.0mm pin) introuction Plasson Electrofusion Fittings Plasson fittings are specifically esigne for reliable, high performance pipe joining an
Piping technology stainless steel
INT 4/ Catalogue 0/0 We reserve the right to effect changes. Sanpress Inox Piping technology stainless steel G Press connector system with press connectors an pipes mae of stainless steel material Nos..440
BEARINGS WITH CAGE - GUIDED NEEDLES
EARINGS WITH AGE - GUIE NEELES Technical features earings with cage - guie neeles ONSTRUTION The basic constructions of neele roller bearings are: 1 ) 10 ). Neele roller bearings with integral flanges
Inventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
ANSI VALVE CATALOGUE
ANSI VAVE CATAOGUE GATE VAVES GOBE VAVES CHECK VAVES BA VAVES BUTTERFY VAVES SYSTEMS AND PRODUCTS FOR INDUSTRIA CARGO TRANSFER AND STORAGE ANSI VAVE CATAOGUE Introuction CTS has evelope itself into a reputable
Balfit Hydraulic Hose Fittings
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
Section 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP
ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
Type 514, 515, 517, 519
Diaphragm Valve Type 514, 5, 517, 519 General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM, NBR, PTFE/EPDM, PTFE/FPM,
410, 417, 423. Butterfly valve, Plastic
Butterfly valve, Plastic Construction GEMÜ 410, 417 and 423 are centric butterfly valves in nominal sizes N 15-50. The valve body is made of PVC-U, the butterfly disc is made of PVF or PP. The available
0200/11.02 AMTEC. Precision thread inserts for plastic parts and equipment for installation
0200/11.02 AMTEC Precision threa inserts for plastic parts an equipment for installation AMTEC threa inserts Contents Page AMTEC highly wear-resistant threa inserts for plastic parts 3 The avantages an
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
SIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
Diaphragm Valve, Metal
iaphragm Valve, Metal Construction The GEMÜ manually operated 2/2-way metal diaphragm valve has a non-rising handwheel and an integral optical position indicator as standard. Features Suitable for inert
FX Series Butterfly Valves Product Data Sheet
< STANDARDS > ASTM D4101-86 ASTM D1784 ASTM D3222 IPEX FX Series Butterfly Valves offer superior strength and chemical resistance in highly corrosive environments and process flow conditions. The special
Split pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic
B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE
MKV AC capacitors. General AC applications. Ordering code: B25832 Date: September 2005
MKV C capacitors General C applications Orering coe: Date: September 2005 EPCOS G 2005. Reprouction, publication an issemination of this ata sheet, enclosures hereto an the information containe therein
Butterfy valves 4 offset DN65 up to DN2500 / PN2,5 up to PN160 / Class 150 up to Class 900
EN utterfy valves 4 offset N up to N0 / PN2,5 up to PN / Class 1 up to Class 0 utterfly valves 4 offset N up to N0 / PN2,5 up to PN Main application The range of application depends directly on materials,