Unimaster Dust Collectors Series UMA

Size: px

Start display at page:

Download "Unimaster Dust Collectors Series UMA"

Duane Doyle
5 years ago
Views:

1 Unimaster Dust Collectors Series UM 70-2 d required for maintenance Lifting bracket (removable) 230 minimum clearance 102 Cleaned air outlet 380 required for cleaner motor cover removal coustic diffuser (may be fitted with optional secondary or absolute filter)* Terminal box Donaldson Torit DCE Fan chamber Cleaner motor C Filter chamber Joint line e f to centre of inlet spigot Contaminated air inlet (may be fitted either side or at rear) Quick-release sealer gear Dust container SIDE ELEVTION FRONT ELEVTION UNIMSTER DUST COLLECTOR WITH DUST CONTINER UM 153 illustrated. Suitable for inside locations. *Secondary filter and absolute filter not available for UM 72 dust collector. SPECIFICTIONS Inlet spigot Net Filtration DIMENSIONS in mm (inside dia.) Fan Motor Dust area C d e f rating container weight mm (approx.) UM m G kw 55 litre 203 kg UM m G1 K kw 1. kw 80 litre 295 kg 300 kg G kw 333 kg K3 1. kw 338 kg UM m K kw 80 litre 3 kg K kw 378 kg G8 5. kw 393 kg G kw 445 kg K3 1. kw 4 kg UM m K kw 80 litre 465 kg K kw 490 kg G8 5. kw 5 kg Publication 2724E (G) 0906 Donaldson reserve the right to alter design without notice. Freedom from patent restrictions must not be assumed.

2 Unimaster Dust Collectors Series UM 70-2 d required for maintenance Lifting bracket (removable) 230 minimum clearance 102 Cleaned air outlet 380 required for cleaner motor cover removal coustic diffuser (may be fitted with optional secondary or absolute filter)* Terminal box Donaldson Torit DCE C Fan chamber Cleaner motor Filter chamber Seating level SIDE ELEVTION UNIMSTER HOPPER TYPE DUST COLLECTOR UM 1H illustrated. Suitable for inside locations. *Secondary filter and absolute filter not available for UM 70H dust collector. SPECIFICTIONS FRONT ELEVTION Net Filtration DIMENSIONS in mm Fan Motor area C d rating weight (approx.) UM 70H 6.23 m G kw 170 kg UM 100H 9.29 m G1 K kw 1. kw 2 kg 2 kg G kw 270 kg K3 1. kw 275 kg UM 1H m K kw 290 kg K kw 315 kg G8 5. kw 330 kg G kw 5 kg K3 1. kw 360 kg UM 2H m K kw 375 kg K kw 0 kg G8 5. kw 415 kg DUST CONTINER Typical dust densities 55 litre (2 cu.ft.) 80 litre (3 cu.ft.) Size pprox net weight 55 litre 5kg 80 litre 6kg reasonable total load for removal by hand would be 25 kg Dust Sander Graphite Sand Iron Steel Density with % voidage 0.13 kg/litre 0.80 kg/litre 1.33 kg/litre 3.58 kg/litre 3.72 kg/litre 2

3 Unimaster Dust Collectors Series UM 70-2 d required for maintenance Lifting bracket (removable) 230 minimum clearance 90 Cleaned air outlet 380 required for cleaner motor cover removal Cleaner motor Filter chamber Donaldson Torit DCE C Seating level SIDE ELEVTION FRONT ELEVTION UNIMSTER VENTING TYPE DUST COLLECTOR UM 1V illustrated. Suitable for inside locations and outside when fitted with optional weather cowl. SPECIFICTIONS Filtration DIMENSIONS in mm area C d Net weight (approx.) UM 70V 6.23 m kg UM 100V 9.29 m kg UM 1V m kg UM 2V m kg d required for maintenance Lifting bracket (removable) 230 minimum clearance 90 Cleaned air outlet 380 required for cleaner motor cover removal Cleaner motor Filter chamber Donaldson Torit DCE Joint line C e f to centre of inlet spigot Contaminated air inlet (may be fitted either side or at rear) Quick-release sealer gear Dust container SIDE ELEVTION UNIMSTER VENTING TYPE DUST COLLECTOR WITH DUST CONTINER UM 153V illustrated. Suitable for inside locations and outside when fitted with optional weather cowl. SPECIFICTIONS FRONT ELEVTION Filtration DIMENSIONS in mm Inlet spigot Dust Net area C d e f (inside dia.) container weight mm (approx.) UM 72V 6.23 m litre 126 kg UM 103V 9.29 m litre 174 kg UM 153V m litre 199 kg UM 253V m litre 265 kg 3

4 Unimaster Dust Collectors Series UM 70-2 d required for maintenance Lifting bracket (removable) 230 minimum clearance 102 Cleaned air outlet 380 required for cleaner motor cover removal coustic diffuser (may be fitted with optional secondary or absolute filter) Terminal box Donaldson Torit DCE Fan chamber Cleaner motor C Filter chamber Joint line e lternative insert with swing door for sack tipping units fitted with optional explosion relief panels Opening: 5 wide x 665 deep Quick-release hatch (removed when tipping) Standard opening on all models: 680 wide x 700 deep Seating level SIDE ELEVTION UNIMSTER SCK TIPPING UNIT UM 1STU illustrated. Suitable for inside locations. FRONT ELEVTION SPECIFICTIONS Filtration DIMENSIONS in mm Motor Net Fan weight area C d e rating (approx.) UM 100STU 9.29 m K3 1. kw 313 kg UM 1STU m K3 1. kw 368 kg UM 2STU m K3 1. kw 553 kg DESIGN LIMITS (standard equipment) Temperature range: 10 to +60 C Pressure limits: Collectors with fan: as fan performance curves from shut-off to operating pressure Venting type collectors: 300 mm W.G. to +2 mm W.G. Dimension tolerances: ±3 mm on main dimensions; ±2 mm on detail dimensions Equipment suitable for use in a potentially explosive atmosphere (Directive 94/9/EC) satisfying the requirements for group II category 2D and 3D T1 C is available 4

5 Unimaster Dust Collectors Series UM 70-2 c DIMENSIONS in mm c UM UM UM UM CLENED IR OUTLET DETILS UM 1 illustrated UM 70V UM 100V and 1V UM 2V CLENED IR OUTLET DETILS FOR VENTING TYPE COLLECTORS ll holes 4 mm 5

6 Unimaster Dust Collectors Series UM UM 70H and 70V UM 100H and 100V UM 1H and 1V UM 2H and 2V PERTURE ND MOUNTING FLNGE DETILS FOR HOPPER ND VENTING TYPE COLLECTORS ll holes 12 mm for M10 bolts 6

7 Unimaster Dust Collectors Series UM UM 100STU UM 1STU Safety bars (30 x 30 x 5 RS) welded at equal intervals between side members UM 2STU PERTURE ND MOUNTING FLNGE DETILS FOR SCK TIPPING UNITS ll holes 12 mm for M10 bolts 7

8 Unimaster Dust Collectors Series UM STTIC PRESSURE T FN INLET (mm W.G.) G1 K3 K5 G8 K7 UNIT RESISTNCE CURVE IR VOLUME (m 3 /h) UNIT PERFORMNCE CURVES FN SELECTION These curves indicate static pressure available at fan inlet for a given volume when fitted inside a Unimaster dust collector. To select the most suitable fan for a given application: 1 Determine the air volume, in m 3 /h, needed to entrain the dust. 2 Read off the unit resistance, in mm W.G., at air volume required. 3 ssess pressure drop over filter bags prior to cleaning, usually to 100 mm W.G. 4 Estimate pressure drop through connected system i.e. between point of entrainment and collector inlet. 5 The sum of 2, 3 and 4 W.G. required. 6 Consult graph for fan performances available. Sack Tipping Units have K3 (1.5 kw) fans with modified outlet to ensure adequate face velocities at the tipping hatch under normal operating conditions. Typically, the exhaust rate for the UM 2STU is 1275 m 3 /h (7 cfm). UCS Controller ELECTRICL REQUIREMENTS Voltage input: 220-2V, Single Phase, Hz (for collectors with G1 or K3 fans only) V / V, Three Phase, Hz 2-277V / 4-480V, Three Phase, 60Hz or to suit local voltage 8

9 Unimaster Dust Collectors Series UM 70-2 NOISE LEVELS Machinery noise levels are an important consideration in the design and selection of new equipment. Several EC Directives and National Laws/Regulations adopting these directives make reference to airborne noise emissions. ctions that employers are required to comply with if employees are subjected to a daily personal noise exposure Lep,d of d() or more are also specified. ll Unimaster dust collectors, when fitted with an acoustic diffuser, secondary filter or absolute filter, operating an 8 hour shift, are below this action limit. WEIGHTED SOUND PRESSURE LEVELS ll readings were taken in normal industrial areas, i.e. semi-reverberant surroundings, with local equipment silent. Measurements were taken at maximum air flow conditions at 1.0 metre radius from the equipment housing and 1.6 metres above base level, using a precision sound level meter and octave filter. G1 K3 K5 K7 G8 With acoustic diffuser 65 d() 67 d() 68 d() 69 d() 72 d() With secondary filter * 67 d() 68 d() 69 d() 72 d() With absolute filter * 67 d() 68 d() 69 d() 72 d() Noise levels of installed equipment may vary due to site conditions. *Secondary and absolute filter not supplied with G1 fan. Measured data. 29 c 1 minimum clearance SIDE ELEVTION (Detail of cleaned air outlet with weather cowl and lid removed) SIDE ELEVTION OPTIONL WETHER COWL UM 1V illustrated SPECIFICTIONS DIMENSIONS in mm c FRONT ELEVTION Net weight (approx.) UM 70V kg UM 100V kg UM 1V kg UM 2V kg 9

10 Unimaster Dust Collectors Series UM Joint line RER ELEVTION SIDE ELEVTION POSITION OF OPTIONL EXPLOSION RELIEF FLNGE UM 153 illustrated UM type: H 100H 1H 2H 70V 100V 1V 2V 72V 103V 153V 253V Dimension in mm: If a vent duct is not connected to the explosion relief flange, then a minimum clearance of 0 mm should be made to the rear of the collector to ensure efficient operation of the explosion venting process. Consideration should be given to the local surrounding area in regards to the pressure and flame effects (UM 100) 209 (UM 1) 143 (UM 2) 548 (UM 100 and 1) 614 (UM 2) 468 (UM 100 and 1) 2 (UM 2) 100 RER ELEVTION SIDE ELEVTION POSITION OF OPTIONL EXPLOSION RELIEF FLNGES FOR SCK TIPPING UNITS UM 1STU illustrated If vent ducts are not connected to the explosion relief flanges, then a minimum clearance of 0 mm should be made to the rear of the collector to ensure efficient operation of the explosion venting process. Consideration should be given to the local surrounding area in regards to the pressure and flame effects. 10

11 Unimaster Dust Collectors Series UM mm mm mm mm UM 70 UM 100 and mm mm UM 2 OPTIONL EXPLOSION RELIEF FLNGE MOUNTING DETILS ll vertical holes drilled 10 mm for M8 bolts. ll horizontal holes threaded to accept M8 bolts. 11

12 Humberstone Lane Thurmaston Leicester LE4 8HP England Tel +44 (0) Fax +44 (0) Research Park Zone 1 Interleuvenlaan Leuven (Heverlee) elgium Tel +32 (0) Fax +32 (0) IFS-europe@emea.donaldson.com

Unimaster Dust Collectors Series UMA

Unimaster Dust Collectors Series UM 70-2 d required for maintenance Lifting bracket (removable) 230 minimum clearance 102 Cleaned air outlet 380 required for cleaner motor cover removal coustic diffuser