RF Dust Collectors. Torit Data Sheet. Models 48RF8-484RF12

Transcription

1 Torit Data Sheet RF Dust Collectors Models 48RF8-RF1 Reliable, simple design and energy-efficient operation to handle high-volume dust collection applications. If you are dealing in applications where high air volumes with heavy dust loading are the norm such as woodworking, cement, grain, chemicals, food or other processing then you will want to investigate the rugged workhorse capabilities of the Torit RF baghouse dust collectors. Its tough construction includes a 1/4" tubesheet and up to /16" body wall thickness. These units maintain the high filtration capacity of 99.9%+ by weight with minimal pressure drop. Torit RF Dust Collector A single RF collector handles higher volumes of dust with just one hopper a benefit that translates to easier installation.

2 Benefits of the RF Dust Collector All-Welded Construction Solid, durable one-piece chamber makes it easier and less costly to install the dust collector. Heavy duty 1/4" tubesheet with up to /16" body wall thickness. Standard Outlet (Round optional) Rotating Cleaning Air Manifold Needs only one solenoid and diaphragm valve because the manifold rotates into position over the bag openings. Makes troubleshooting and maintenance much easier. Involute Scroll Inlet Directs dirty air into a cyclonic pattern, causing heavy dust particles to fall into the hopper before rising to the filter bag section. This eliminates the need for a cyclone precleaner used on other baghouses. Optional Explosion Vents Positive Seal Boltsafe Cages Provide electrical grounding, easy bag changeout, reduce bag sway, and an airtight seal to the tubesheet. Cages will not rise out of position once they are installed. Oval Bags Provide more radial bag movement during the cleaning cycle, resulting in longer bag life. Even-Air Flow Straightener Eliminates bag sway and extends bag life by straightening airflow. Optional Legs and Caged Ladders Compact Design Round unit has one hopper in base; there is usually no need for screw conveyors or multiple discharge devices. Medium-Pressure Air Pump Eliminates need for compressed air, which can be susceptible to condensation and freezing problems. The mediumpressure air pulse cleans efficiently to extend bag life. Easy to install built to last.

3 Specifications RFW (Walk-In) Model 48RF8 48RF10 7RF8 7RF10 14RF8 14RF10 16RF8 16RF10 RF8 RF10 RF1 76RF8 76RF10 76RF1 76RF8 76RF10 76RF1 RF8 RF10 RF1 No. Bags Length Cubic Feet of Cloth Air/Min (cfm) Air-to-Media Ratio Area (ft ) :1 10:1 1: ,49,10,74 4,68 6,40 8,06 8,110 10,10 1,06 1,090 18,110 14,0 17,9 1,40 19,0 4,460 9,4,170 1,48 7,77 4,990 6,40 7,490 9,70 1,900 16,10 16,0 0,00 4,10 0,180 6,0 8,700,910 4,080 9,100 48,90 8,690 0,40 6,970 7,0 7,48 9,60 11, 14,0 19,0 4,19 4,0 0,40 6,19 4,70 4,0 4,00,86 64,60 8,60 7,80 88,0 7,10 94,4 11, Air Pump (hp) 7" w/optional Leg Pack (shown) RFT (Top-Cover) Optional Hopper Outlet Transition Model A 48RF8 '-8" 48RF10 '-8" 7RF8 '-8" 7RF8 '-8" 14RF8 8'-0" 14RF10 8'-0" 16RF8 8'-0" 16RF10 8'-0" RF8 10'-" RF10 10'-" RF1 10'-" 76RF8 10'-" 76RF10 10'-" 76RF1 10'-" 76RF8 11'-7 /8" 76RF10 11'-7 /8" 76RF1 11'-7 /8" RF8 1'-1 /8" RF10 1'-1 /8" RF1 1'-1 /8" Approximate Dimensions (ft) B C D E 4'-6 /4" 19'-8 /4" 4'- 1 /" 1'-6 1 /4" 4'-6 /4" 4'-6 /4" 4'-6 /4" 1'-8 /4" 19'-8 /4" 1'-8 /4" '-7" 8'- 1 /" 4'- 1 /" 8'- 1 /" 6'-4" 17'-6 1 /4" 1'-6 1 /4" 17'-6 1 /4" '- /8" 4'-7" 0'-4" 4'- /8" 1'- /8" 1'- /8" 1'- /8" '-7" 4'-7" '-6 /8" 7'-6 /8" 9'-6 /8" '-6 /8" 7'-6 /8" 9'-6 /8" 10'-10 /4" 7'- /4" 10'-10 /4" 9'- /4" 10'-10 /4" 1'- /4" 9'-0 /8" 1'-0 /8" '-0 /8" 6'-4" 0'-4" 9'-9 1 /8" '-9 1 /8" 7'-9 1 /8" 9'-9 1 /8" '-9 1 /8" 7'-9 1 /8" 1'-9 1 /8" '-9 1 /8" 9'-9 1 /8" '-9 1 /8" 7'-9 1 /8" 41'-9 1 /8" '- /8" 4'- /8" 1'-9 7 /8" '-9 7 /8" '-9 7 /8" 1'-9 7 /8" '-9 7 /8" '-9 7 /8" '-9 1 /4" '-9 1 /4" 7'-9 1 /4" '-9 7 /8" 7'-9 7 /8" 9'-9 7 /8" F 19'- 7 /8" 1'- 7 /8" 19'- 7 /8" 1'- 7 /8" '- /8" 4'- /8" '- /8" 4'- /8" 6'- 9 /64" 8'- 9 /64" 0'- 9 /64" 6'- 9 /64" 8'- 9 /64" 0'- 9 /64" 8'- 7 /8" 0'- 7 /8" '- 7 /8" 1'-11 /4" '-11 /4" '-11 /4" Shipping Weight (lbs) 7,88 8,10 7,4 8,06 10,048 10,910 10,98 11,17 1,04 16,91 17,8 1,614 16,97 18,90 19,617 1,48,868,48 7,796 0,11

4 Torit RF Dust Collectors Standard Equipment All-welded or knock-down construction: models - 10 gauge, minimum models - /16" dirty air plenum - 10 gaue clean air plenum Heavy-duty 1/4" plate steel tubesheet Air pump (TEFC motor drive) 1/ hp TEFC motor for manifold drive NEMA 9 pulse valve solenoid Involute scroll inlet with airflow straightener 60 hopper Grounded bag and cage system ±0 "wg housing rating Hopper manhole NEMA 4 pulse timer Magnehelic * pressure differential gauge 16 oz. polyester felt bags Galvanized bag cages Top handrail (RFT) Positive seal Boltsafe hardware Prime coated interior Blue exterior finish coating passes 0-hour salt spray corrosion performance test Optional Equipment Explosion vents Tubular square steel support legs Caged ladder and platform per OSHA specifications Variety of special filter medias, including Tetratex ** Stainless steel construction Sprinkler taps Internal service light Photohelic * gauge Finish coating for hostile environments Round outlets Snap-in bags Custom paint colors Electrical control panels Hopper level indicator Hopper service port " hopper water overflow check valve Hopper outlet transitions '-0" to 1'-8" dia. x 4 1 /8" high '-0" dia. to 1'-4" dia. x 7 /8" high '-0" dia. to 1' 0" dia. x 11" high '-0" dia. to 10" dia. x 1 /4" high '-0" dia. to 8" dia. x 14 1 /" high '-0" dia. to 1'-6" x '-0" rectangle x 1 /16" high * Magnehelic and Photohelic are registered trademarks of Dwyer Instruments, Inc. ** Tetratex is a registered trademark of Tetratec Corporation, a Donaldson Company. Information contained in this document is subject to change without notice.

5 PROCESS ENVIRONMENTS Air Filtration Systems for Industry Dust Collection Fume Extraction Mist Control General Ventilation System Design Ductwork Sheet Metal Fabrication Turn-Key Installations Replacement Parts & Filters Maintenance Contracts HOUSTON AUSTIN CORPORATE OFFICE 406 Newport Blvd. League City, TX Phone: (81) Toll Free: (800) Fax: (81) 6-01 Website: