ROTOLOK SLIMSLIDES. everything under control...

Size: px

Start display at page:

Download "ROTOLOK SLIMSLIDES. everything under control..."

Steven Lloyd
5 years ago
Views:

Tel: +1 (704) 282 4444 Fax: +1 (704) 282 4242 www.

1 RTLK USA Industrial Ventures II 2711 Gray Fox Road Monroe North arolina United States of America Tel: +1 (704) Fax: +1 (704) RTLK SLIMSLIES everything under control...

2 HAN/HAIN WHEEL Rotolok Slim-Slides are used when isolating the flow of dry free flowing products such as powder, granules and dust. esigned for use on various types of gravity feed, e.g. silos, hoppers, screw conveyors etc. where non-automatic operation is required. This cost effective valve is available with round or square inlets measureing between 5 to 14, with options available for single pneumatic or motorised operation. Valve can be supplied with optional limit switches to indicate open/closed positions. Its compact design is incorporated on where minimum space is available. Manufactured on N machines ensures; quick deliveries, interchangablity, accurate components and cost effectiveness. The main feature of the Slim-Slide are; A compact design No lodgement points ust tight to atmosphere on in-line Stainless steel slide plate Aluminium body Affordable Available in Round and Square inlets. Nylon support studs ust seals peration through a lead screw. If chain/chainwheel is required please specify length of chain. HAIN WHEEL SQUARE M HLES N IN TH FLANGES SETIN X-X HAN WHEEl HAIN WHEEl SIZE A E F G H K L M N P J T J T / /16 1/8 2 3/4 12 M /8 3 3/8 6 3/16 7 7/8 1 7/16 8 7/ / / /16 1/8 3 1/2 12 M /8 3 3/8 6 3/16 7 7/8 1 7/16 8 7/ / / /16 1/ M /8 3 3/8 6 3/16 7 7/8 1 7/16 8 7/ /4 12 3/ / /16 1/8 4 11/16 12 M /2 3 3/8 6 3/16 7 7/8 1 7/16 8 7/ /2 13 3/ /16 1/8 5 1/2 12 M /16 3 3/8 6 3/16 7 7/8 1 7/16 8 7/16 x HAIN WHEEL L HLES M EQUISPAE AS SHWN N N IN TH FLANGES SETIN X-X HAN WHEEl HAIN WHEEl SIZE A E F G H K L M N P J T J T /8 9 3/16 8 1/ /16 9 7/16 8 M16 7 7/8 10 3/8 3 3/8 6 3/16 7 7/8 1 7/16 8 7/ / / / /4 8 M16 9 1/2 12 1/4 3 3/8 6 3/16 7 7/8 1 7/16 8 7/ / / / /8 8 M /16 3 3/8 6 3/16 7 7/8 1 7/16 8 7/ /8 14 1/8 13 5/ / / /8 8 M /8 17 7/8 3 3/8 6 3/16 7 7/8 1 7/16 8 7/ / / / / / /16 12 M / /16 3 3/8 6 3/16 7 7/8 1 7/16 8 7/ / / / /4 12 M / /8 6 3/16 7 7/8 1 7/16 8 7/16 imensions are approximate and subject to change without notice rillings are Rotolok standards. Variations can be made.

3 PNEUMATI esigned for use on various types of gravity feed, e.g. silos, hoppers, screw conveyors etc. where automatic operation is required. This cost effective valve is available with round or square inlets measuring between 5 to 14, with options available for manual, motorised or lead screw operation. Rotolok s Slim-Slide has all the features of the Manual version, but can be operated remotely as required in process control. Valve is supplied complete with single solenoid spring return valve and limit switches to indicate open/closed positions. ylinder and solenoid is pre-piped ready for installation. Its compact design is incorporated on where minimum space is available. Manufactured on N machines ensures; quick deliveries, interchangeability, accurate components and cost effectiveness. The main feature of the Slim-Slide are; ompact esign No Lodgement Points ust Tight to Atmosphere on in-line Aluminium ody Nylon Support Studs ust Seals Round and Square Inlets omplete with Solenoid Valve and Limit Switches pitches of E pitches of E SIZE A E F G H J K L M / /8 2 7/8 2 5/8 1/2 M / / /8 2 7/8 2 5/8 1/2 M / /8 15 1/16 2 7/8 3 1/2 M /4 3 4 ¹1/ / /8 2 7/8 3 1/2 M /2 381 / /8 2 7/8 3 1/2 M12 SIZE A E F G H J K L M /16 203/4 95/8 81/2 2 7/8 25/8 8 M16 77/ /4 235/8 105/ /8 25/8 8 M16 91/ /8 275/8 125/ /8 25/8 8 M /16 331/8 151/8 135/16 2 7/8 3 8 M16 125/ /16 381/2 171/8 153/4 2 7/ M20 151/ /4 441/4 191/ / M20 171/2 imensions are approximate and subject to change without notice rillings are Rotolok standards. Variations can be made.

4 MTRIZE esigned for use on various types of gravity feed, e.g. silos, hoppers, screw conveyors etc. where automatic operation is required. This cost effective valve is available with round or square inlets measureing between 5 to 14, with options available for manual, single pneumatic or lead screw operation. Rotolok s Slim-Slide has all the features of the Manual version, but can be operated remotely as required in process control. Valve is supplied complete with and limit switches to indicate open/closed positions. Motor supplied with belt drive in enclosed guard. Its compact design is incorporated on where minimum space is available. Manufactured on N machines ensures; quick deliveries, interchangablity, accurate components and cost effectiveness. The main feature of the Slim-Slide are; ompact esign No Lodgement Points ust Tight to Atmosphere on in-line Aluminum ody Nylon Support Studs ust Seals Round and Square Inlets omplete with Limit Switches, as detailed in the drawing SQUARE E X X T M HLES N IN TH HLES I rive Spec: 1/2 HP NEMA Foot E mounted TEF motor 1800 RPM Supply: 230/460/3/60 Y P complete with V belt drive in an SETIN X-X enclosed guard A J SIZE A Ø ØE F G H I J ØK L M N P Q R S T F G H /4 97/ /8 5 81/ /4 12 M10 105/8 33/8 17/16 515/16 97/16 83/ /4 113/4 1113/16 77/8 67/8 2 7/ / /2 12 M10 123/8 33/8 17/16 515/16 97/16 83/ / /16 97/8 87/8 2 7/ / M12 141/8 33/8 17/16 515/16 97/16 83/ /4 121/4 153/4 1113/ /16 2 7/ / /16 12 M10 161/2 33/8 17/16 515/16 97/16 83/ /2 133/ /4 1213/16 2 7/ / /2 12 M /16 33/8 17/16 515/16 97/16 83/8 Q S R E K X T X L HLES M EQUISPAE AS SHWN N AN IN TH SIES F G H I A SETIN X-X J Q P S R rive Spec: 1/2 HP NEMA Foot mounted TEF motor 1800 RPM Supply: 230/460/3/60 Y complete with V belt drive in an enclosed guard SIZE A Ø ØE F G H I J ØK L M N P Q R S T 5 205/8 91/8 81/2 47/8 37/8 2 7/8 3/16 67/8 2 91/2 8 M16 77/8 103/8 33/8 11/2 6 91/2 83/ /8 101/8 97/8 57/8 47/8 2 7/8 3/ /4 8 M16 91/2 121/4 33/8 11/2 6 91/2 83/ /8 131/4 113/4 77/8 67/8 2 7/8 3/16 123/ /8 8 M /8 33/8 11/2 6 91/2 83/ /8 141/8 131/4 97/8 87/8 2 7/8 3/16 163/ /8 8 M16 125/8 177/8 33/8 11/2 6 91/2 83/ /8 161/8 153/4 113/4 107/8 2 7/8 3/16 207/ /8 12 M20 151/2 211/8 33/8 11/2 6 91/2 83/ / /4 123/4 2 7/8 3/16 241/ M20 171/ /8 11/2 6 91/2 83/8 imensions are approximate and subject to change without notice rillings are Rotolok standards. Variations can be made.

5 MANUAL Ideal for various types of gravity feed e.g. silos, hoppers, screw conveyors etc., where easy access or infrequent use lends itself to maual operations. This cost effective valve is available with round or square inlets measureing between 5 to 14, with options available for single pneumatic, motorised or lead screw operation. The Slim Slide by careful design has a build up facility and by adding further components it can easily by converted from the manual version to: single pneumatic, screw type or motorised. Its compact design is incorporated on where minimum space is available. Manufactured on N machines ensures; quick deliveries, interchangablity, accurate components and cost effectiveness. The main feature of the Slim-Slide are; ompact esign No Lodgement Points Minimum ust Escapement Precision Machined Aluminium ody Nylon Support Studs ust Seals Round and Square Inlets Affordable F SIZE A E F G H J K L M /4 143/16 91/ M10 2 7/ /16 173/4 1113/ M10 2 7/ ⁵/ / M12 2 7/ / /16 201/16 123/ M10 2 7/ /2 223/8 133/ M12 2 7/8 H holes tapped J equi-spaced (ff RS) on K P. (oth flanges) SIZE A E F G H J K L M /16 137/8 81/2 93/ M16 77/8 2 7/ /4 153/ /8 6 8 M16 91/2 2 7/ /8 191/ /16 613/16 8 M / /16 213/8 135/16 141/ M16 125/8 2 7/ /16 243/4 153/4 161/ M20 151/2 2 7/ / /4 12 M20 171/2 2 7/8 imensions are approximate and subject to change without notice rillings are Rotolok standards. Variations can be made.

6 THER RTLK PRUTS As well as the ffset Rotary Valves, Rotolok manufacture and supply a range of other products in ast Iron for use in conveying systems. These include, but are not limited to: Rotary Valve; ust ollector Valve; Roundhead Valve; lowing Seals and various iverter Valves. For more information, please visit our website or contact our sales team. A Standard Rotary Valve that can be made to suit most with a variety of construction materials and rotors A ast Iron conveying diverter valve. Available with flanged or spigotted connections to fit existing conveying systems A typical lowing Seal with a square inlet used in pneumatic conveying systems. A Standard Plug iverter Valve. The valve has a rugged cast iron body and is suitable for abrasive or high pressure

ROTOLOK SLIMSLIDES. everything under control...

ROTOLOK SLIMSLIDES. everything under control... RTLK SLIMSLIES RTLK USA Industrial Ventures II 2711 Gray Fox Road Monroe North arolina 28110 United States of America Tel: +1 (704) 282 4444 Fax: +1 (704) 282 4242 www.rotolok.us sales@rotolok.us INTRUTIN: