Engineering Data Pack C Series and 4300 Series Pumps

Transcription

1 Engineering Data Pack Series and 4300 Series Pumps Excellence at work. Excellence in life.

2 Table of ontents Product Overview 3 2F Features 3 2E Features 3 2B/4310 Features 3 K2B Features 3 2FA Features 3 2S/2SA Features 3 Features 3 2F Pump 4 2E Pump Mounting Dimensions 5 2B Pump Mounting Dimensions 6 K2B Pump Mounting Dimensions 6 2FA Pump Mounting Dimensions 8 2S Mounting Dimensions 9 2SA Pump Mounting Dimensions 10 Pump Model Number System 11 Pump Temperature Limits 12 Pump Materials of onstruction 12 Pump NPSH Data 12 Viscosity orrection Factor 12 Dimensions for 2F lose oupled Pumps to Three Phase Motors 13 Dimensions for Adapter Mounting 2F Pumps to NEMA Frame Motors 14 Dimensions for Adapter Mounting 2B & 4300 Pumps Dimensions for Series Mounting Feet (281, 381, 3K81 & 581) Pump Mounting Dimensions Pump Model Number System Series Port Sizes Pump Temperature Limits Pump Materials of onstruction / ross Reference List Pump/NEMA Motor Mounting Dimensions 015, 020 & 030 Pump/NEMA Motor Mounting Dimensions 22 Pump Model Number System 23 Pos. 1 & 2 - Pump Series 23 Pos. 3 - Material of onstruction 23 Pos. 4 - Frame Size 23 Pos. 5, 6, & 7 - Pump Size 23 Pos. 8 - Porting 23 Pos. 9 - Seal Elastomer 23 Pos. 10 & 11 - Rotation 23 Pos Valve Type 23 Pos Special Modification 23 Pump Temperature Limits 23 Pump Materials of onstruction 23 Pump NPSH Data 24 Viscosity orrection Factor 24 to NEMA Frame Motors 15 Dimensions for Adapter Mounting K2B Pumps to NEMA Frame Motors 16 Page 2 of 24

3 Product Overview Positive Displacement Internal Rotary Gear Design ast Iron onstruction with NPT Top Ports Five Sizes from 3-84 GPM Typical Viscosity Range is 40-10,000 SSU Temperatures to 375 F 2F Features Flange Mount onfiguration Spring Loaded Viton Lip Seal Inlet Pressure to 25 PSI Discharge Pressure to 100 PSI Maximum Differential Pressure to 100 PSI 2E Features Foot Mounted onfiguration Spring Loaded Viton Lip Seal Inlet Pressure to 25 PSI Discharge Pressure to 100 PSI Maximum Differential Pressure to 100 PSI 2B/4310 Features Flange Mount onfiguration Viton Mechanical Seal Inlet Pressure to 250 PSI Discharge Pressure to 300 PSI Maximum Differential Pressure to 150 PSI K2B Features Flange Mount onfiguration Viton Mechanical Seal Double Ball Bearing with an Inboard Heavy-Duty Roller Bearing Inlet Pressure to 250 PSI Discharge Pressure to 300 PSI Maximum Differential Pressure to 250 PSI 2FA Features Flange Mount onfiguration Seal-less Design for OEM Built-In Applications Inlet Pressure to 25 PSI Discharge Pressure to 100 PSI Maximum Differential Pressure to 100 PSI 2S/2SA Features Incomplete Stripped onfigurations for OEM Built-In Applications 2S onsists of over, Housing, Idler Gear, & Rotor 2SA onsists of over, Idler Gear, & Rotor Reversing Feature Options Internal Relief Valve and Outboard Ball Bearing Reversing Feature and SAE Porting Adabper Kit for NEMA Face Ports Shaft Modification for lose oupled Mounting Options Internal Relief Valve and Outboard Ball Bearing Reversing Feature and SAE Porting Options Seal Elastomer (Neoprene/EPR) Internal Relief Valve and Outboard Ball Bearing Reversing Feature and SAE Porting Mounting Foot for Direct Drive Adapter Kit for NEMA Face Mounting Options Seal Elastomer - Neoprene or EPR Internal Relief Valve and Reversing Feature Mounting Foot for Direct Drive Adapter Kit for NEMA Face Mounting Options Internal Relief Valve Outboard Ball Bearing Reversing Feature SAE Porting Tang Shaft Modificaiton Features Flange Mount onfiguration Directly to NEMA 56, 143/145 T Motor Viton Mechanical Seal Inlet Pressure to 25 PSI Discharge Pressure to 125 PSI Maximum Differential Pressure to 100 PSI Optional Relief Valve Page 3 of 24

4 2F Pump P T PIPE TAP Z L O X N ØU ØB B.. ØS A M WOODRUFF G OVERALL LENGTH WITH RELIEF VALVE FEATURE R OVERALL LENGTH WITH REVERSING FEATURE L AL AO AN 23 L BL BO BN WOODRUFF.367 MODIFIATION "A" BALL BEARING FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSING FEATURE Model A B R G K L M N O P S 22F 22 1/2 3 7/8 5 1/8 5 / 6 7/ # / /8 2 5/8 5 7/ 3 1/4 32F 22 1/2 5 1/8 6 17/ 6 7/8 7 17/ # /16 2 5/16 2 3/ 3 7/16 6 5/8 3 3/4 42F 22 1/2 5 1/8 7 27/ 7 9/16 8 7/ # / 3 2 3/ 3 7/16 6 1/2 3 3/4 52F /8 9 1/ /8 10 1/4 # /4 4 5/16 2 3/8 3 3/8 7 1/2 3 3/4 62F /8 9 1/2 12 1/8 10 3/4 # /16 2 3/8 3 3/8 8 1/8 3 3/4 Model T U X Z AL AN AO BL BN BO 22F 1 NPT 5/8 3 11/16 3 1/8 3 1/16 1 1/16 2 1/16 6 1/ / 5 1/ 32F 1 1/4" NPT 3/4 4 7/8 4 1/8 3 7/16 23/ 2 1/ / / 5 7/16 42F 1 1/2" NPT 3/4 4 1/8 3 3/4 3 17/ 23/ 2 1/ / 2 25/ 5 7/16 52F 1 1/2" NPT /4 4 1/4 7/8 1 7/8 6 7/8 1 29/ 4 1/2 62F 2 NPT 1 4 3/4 4 3/4 4 1/2 7/8 1 7/8 7 1/8 1 29/ 4 1/2 Page 4 of 24

5 2E Pump Mounting Dimensions P T PIPE TAP Z L X N ØU D WOODRUFF H E E M F G OVERALL LENGTH WITH RELIEF VALVE FEATURE R OVERALL LENGTH WITH REVERSING FEATURE L BL BN WOODRUFF BALL BEARING FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSING FEATURE Model R G D E F H K L M N P 22E 5 1/8 5 / 6 7/ 3 1 1/4 1 19/ 13/ # /8 1 29/ 1 5/8 5 7/ 32E 6 17/ 6 7/8 7 17/ 3 7/8 1 1/2 SLOT 15/ # /16 SLOT 2 3/ 6 5/8 42E 7 27/ 7 9/16 8 7/ 3 7/8 1 1/2 SLOT 15/ # / SLOT 2 3/ 6 1/2 52E 10 3/ /4 11 3/8 4 3/4 1 1/2 SLOT 15/ # /8 SLOT 3 1/2 7 1/2 62E 10 5/8 13 1/4 11 7/8 4 3/4 1 1/2 SLOT 15/ # /8 SLOT 3 1/2 8 1/8 Model T U X Z BL BN 22E 1 NPT 5/8 3 11/16 3 1/8 6 1/6 2 19/ 32E 1 1/4 NPT 3/4 4 7/8 4 1/8 6 13/ / 42E 1 1/2 NPT 3/4 4 1/8 3 3/4 6 29/ 2 25/ 52E 1 1/2 NPT /4 6 7/8 1 29/ 62E 2 NPT 1 4 3/4 4 3/4 7 1/8 1 29/ Page 5 of 24

6 2B Pump Mounting Dimensions P T PIPE TAP Z L O N X ØU ØB B.. ØS D WOODRUFF E E H M G OVERALL LENGTH WITH RELIEF VALVE FEATURE F R OVERALL LENGTH WITH REVERSING FEATURE L BL BO BN WOODRUFF BALL BEARING FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSING FEATURE Model B R G D E F H K L M N 22B 7 9/16 3 7/8 8 3/ 8 / 3 1 1/4 1 19/ 13/ # / / 2 17/ 32B 8 17/ 5 1/8 8 7/8 9 17/ 3 7/8 1 1/2 SLOT 15/ # /16 SLOT 2 1/2 42B 9 27/ 5 1/8 9 9/ / 3 7/8 1 1/2 SLOT 15/ # / SLOT 2 1/2 52B 11 15/16 6 5/8 14 1/2 13 1/8 4 3/4 1 1/2 SLOT 15/ # /8 SLOT 3 13/ 62B 12 3/8 6 5/ /8 4 3/4 1 1/2 SLOT 15/ # /8 SLOT 3 13/ Model O P S T U X Z BL BN BO 22B 5 1/16 5 7/ 3 1/4 1 NPT 5/8 3 11/16 3 1/8 6 1/ / 5 1/16 32B 5 7/16 6 5/8 3 3/4 1 1/4" NPT 3/4 4 7/8 4 1/8 6 13/ / 5 7/16 42B 5 7/16 6 1/2 3 3/4 1 1/2" NPT 3/4 4 1/8 3 3/4 6 29/ 1 25/ 5 7/16 52B 6 1/4 7 1/2 3 3/4 1 1/2" NPT /4 8 5/8 2 9/16 6 1/4 62B 6 1/4 8 1/8 3 3/4 2 NPT 1 4 3/4 4 3/4 8 7/8 2 9/16 6 1/4 Page 6 of 24

7 K2B Pump Mounting Dimensions T PIPE TAP P Z L O N X TU TH ILL P U MP 0. ØU HIAGO U.S.A. ØS D WODDRUFF E E H M F G OVERALL LENGTH WITH RELIEF VALVE FEATURE R OVERALL LENGTH WITH REVERSING FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSING FEATURE Model R G D E F H K L M N O 2K2B 7 9/16 8 1/16 8 / 3 7/8 1 1/2 SLOT 15/ # /16 SLOT 1 5/8 4 15/16 4K2B 9 27/ 9 9/ / 3 7/8 1 1/2 SLOT 15/ # /16 SLOT 1 5/8 5 5/8 6K2B 12 3/ /8 4 3/4 1 1/2 SLOT 15/ # /16 SLOT /16 Model P S T U X Z 2K2B 5 7/8 3 3/4 1/2" NPT 5/8 2 3/4 2 3/4 4K2B 6 3 3/4 1 NPT 3/4 3 5/8 3 3/4 6K2B 8 1/8 3 3/4 2 NPT 1 4 3/4 4 3/4 Page 7 of 24

8 2FA Pump Mounting Dimensions P T PIPE TAP Z L O X N ØU ØB B.. ØS A M WOODRUFF G OVERALL LENGTH WITH RELIEF VALVE FEATURE R OVERALL LENGTH WITH REVERSING FEATURE L AL AO AN 23 L BL BO BN WOODRUFF.367 MODIFIATION "A" BALL BEARING FEATURE WITH PRESSURE RELIEF VALVE FEATURE WITH REVERSING FEATURE Model A B R G K L M N O P S 22FA 22 1/2 3 7/8 5 1/8 5 / 6 7/ # / /8 2 5/8 5 7/ 3 1/4 32FA 22 1/2 5 1/8 6 17/ 6 7/8 7 17/ # /16 2 5/ / 3 7/16 6 5/8 3 3/4 42FA 22 1/2 5 1/8 7 27/ 7 9/16 8 7/ # / / 3 7/16 6 1/2 3 3/4 52FA /8 9 1/ /8 10 1/4 # /4 4 5/16 2 3/4 3 3/8 7 1/2 3 3/4 62FA /8 9 1/2 12 1/8 10 3/4 # /16 2 3/4 3 3/8 8 1/8 3 3/4 Model T U X Z AL AN AO BL BN BO 22FA 1 NPT 5/8 3 11/16 3 1/8 3 1/16 1 9/16 2 1/16 6 1/ / 5 1/ 32FA 1 1/4" NPT 3/4 4 7/8 4 1/8 3 7/16 1 7/ 2 1/ / / 5 7/16 42FA 1 1/2" NPT 3/4 4 1/8 3 3/4 3 17/ 1 7/ 2 1/ / 2 25/ 5 7/16 52FA 1 1/2" NPT /4 4 1/4 1 1/4 1 7/8 6 7/8 1 29/ 4 1/2 62FA 2 NPT 1 4 3/4 4 3/4 4 1/2 1 1/4 1 7/8 7 1/8 1 29/ 4 1/2 Page 8 of 24

9 2S Mounting Dimensions P T PIPE TAP Q R N TU THILL PU MP OM ANY P ØU WOODRUFF OPTIONAL REVERSING FEATURE ØB Model B R K N P Q T U 1AS 2 7/8 6 1/8 6 1/2 # /8 3 1/2 1/2 3/8 NPT 22S 3 7/8 7 9/16 8 1/16 # /16 4 5/8 5/8 1/2 NPT 32S 5 1/8 8 1/2 8 7/8 # /16 6 3/4 3/4 NPT 42S 5 1/8 9 1/4 9 9/16 # / /4 1 NPT 52S 6 5/8 11 7/8 14 1/2 # /4 7 1/2 1 3/8 1 1/4" NPT 6A2S 6 5/8 12 3/8 15 # /4 7 1/2 1 5/8 2 NPT Page 9 of 24

10 2SA Pump Mounting Dimensions P ØB Q R N TU THILL PU MP OM ANY P ØU WOODRUFF OPTIONAL REVERSING FEATURE Q' Model B R K N P Q Q U 12SA 2 7/8 6 1/8 6 1/2 # /2 3 1/2 11/16 1 1/8 22SA 3 7/8 7 9/16 8 1/16 # /16 4 5/8 3/4 1 5/16 32SA 5 1/8 8 1/2 8 7/8 # / /4 1 11/16 42SA 5 1/8 9 1/4 9 9/16 # / /8 1 11/16 52SA 6 5/8 11 7/8 14 1/2 # /16 7 1/2 1 15/16 4 1/2 62SA 6 5/8 12 3/8 15 # /16 7 1/2 1 15/16 4 1/ Page 10 of 24

11 Pump Model Number System Size Reversing Feature Model Pump Options Rotation Modifications SAE Port Option Position # Pos. 1 - Size Pos. 2 - Reversing Feature R Pos. 3, 4, 5, & 6 - Model 2F 2FA 2E 2B K2B Pos. 7 - Pump Options V = Valve N = Outboard Ball Bearing U = over Rotated 180 Pos. 8 & 9 - Rotation = lockwise Rotation = ounterclockwise Pos. 8 & 9 - Suction Port Location (Pumps w/ Reversing Feature) RH = Right Hand Suction LH = Left Hand Suction Note: -K1B, 2SA, 2S no longer available for purchase. Pos. 10, 11, 12, 13, & 14 - Modifications A = Tang Shaft (2F/2FA) 5 = Neoprene Seal (2B/K2B) 7 = Viton Seal = Abrasion Resistant Viton Seal 8 = EPR Seal (2B/K2B) N = No Flat/Keyway in Shaft Pos. 15, 16, & 17 - SAE Port Option SAE (NPT is Standard) Port Pump Size Style Size STD SAE NPT 1 1/4" - STD /2" - - STD. STD STD. 16 OPT OPT. OPT OPT. - Model Number is Stamped on a Metal Tag on the over TUTHILL 32F OPT. Page 11 of 24

12 Pump Temperature Limits Material Minimum Maximum Material Minimum Maximum Bronze Bushing -100 F 400 F Neoprene -40 F 200 F arbon Bushing -100 F 500 F Ethylene Propylene (EPR) -40 F 300 F Viton -10 F 375 F Notes: A pump s performance is dependent on more than just the temperature ranges of the component materials. Pump Materials of onstruction Part Name Material Standard omments Availability Housing ast Iron ASTM A48-96a lasses 30, 35, or 40 Std. Bracket ast Iron ASTM A48-96a lasses 30, 35, or 40 Std. Bracket Bushing Bronze SAE 660 Std. over ast Iron ASTM A48-96a lasses 30, 35, or 40 Std. Rotor Steel 1137 or 1141 Steel Forging Std. Idler P/M Steel F-0508-P Std. Steel 1117 Opt. Idler Pin Steel 1117 Heat Treated Std. Idler Bushing Bronze SAE Std. Seal Gland ast Iron ASTM A48-96a lasses 30, 35, or 40 DU Bushing Only on 2B models Std. Viton Std. O-Rings & Seal Neoprene EPR Opt. Opt. Pump NPSH Data NPSH Required for Tuthill Pumps SSU Pump Series NPSH (Units) 300 RPM 600 RPM 900 RPM 1200 RPM 1500 RPM 1800 RPM 2 FT FT FT FT FT Viscosity orrection Factor 2500 SSU 5000 SSU SSU SSU 1.3 orrection Factor 1.7 orrection Factor 2.0 orrection Factor 2.7 orrection Factor Page 12 of 24

13 Dimensions for 2F lose oupled Pumps to Three Phase Motors "A" "N" "P" "Q" PIPE TAP "J" "G" "H" ROTATION ARROW "S" "S" "R" "E" "F" TU T H I HIAGO L L P U MP 0. U.S.A. (56Z) 4 SLOTS.34 WIDE (OTHERS) Ø.41 "" "D" "" "B" LEAD HOLE Ø "M" "K" "L" "K" "L" Page 13 of 24 MODEL # HP 3/4 DESRIPTION 3PH/50/60/190/380/220/440 VOLT, /440 VOLT, 1425/1725 RPM, TEF, 56Z FRAME "A" "B" /4 3PH/50//60/190/380/220/440 VOLT, /440 VOLT, /1125 RPM, TEF, 56Z FRAME 3PH/50/60/190/380/220/440 VOLT, /440 VOLT, 1425/1725 RPM, TEF, 56Z FRAME 3PH/50/60/190/380/220/440 VOLT, /440 VOLT, 950/1125 RPM, TEF, 184Z FRAME /2 3PH/50//60/190/380/220/440 VOLT, /440 VOLT, 1425/1725 RPM, TEF, 184Z FRAME PH/50/60/190/380/220/440 VOLT, / /440 VOLT, /1125 RPM, TEF, 184Z FRAME 3PH/50/60/190/380/220/440 VOLT, /440 VOLT, /1725 RPM, TEF, 184Z FRAME 3PH/50/60/190/380/220/440 VOLT, /440 VOLT, /1125 RPM, TEF, 3Z FRAME 3PH/50//60/190/380/220/440 VOLT, /440 VOLT, /1725 RPM, TEF, 3Z FRAME 3PH/50/60/190/380/220/440 VOLT, /440 VOLT, /1125 RPM, TEF, 5Z FRAME "" "D" "E" "F" "G" "H" "J" "K" "L" "M" WT MODEL # "N" 22F F 42F ASSEMBLY STYLES A "P" "R" "S" B D "Q" - NPT

14 Dimensions for Adapter Mounting 2F Pumps to NEMA Frame Motors LP Y W Z T PIPE TAP X D B A Page 14 of 24 Pump Model 22F 32F 42F 52F 62F Motor Frame Size LP Adapter Adapter Kit /16 2F51 2F T, 145T 5 11/16 2F51 2F534A 182T, 184T 6 1/8 F F /4 3F51 3F T, 145T 6 1/4 3F51 3F534A 182T, 184T 6 15/16 31F F T, 5T 7 11/16 31F F T, 184T 6 7/8 51F F T, 5T 7 5/8 51F F T, 256T 8 5/16 51F F T, 286T 9 1/4 51F F T, 6T 9 3/4 51F F534-4 Motor Frame A B D / /16 3 1/2 143T 2 1/ /4 3 1/2 145T 2 1/ /4 3 1/2 182T 2 3/4 4 1/2 3 3/4 4 1/2 184T 2 3/4 5 1/2 3 3/4 4 1/2 3T 3 1/2 5 1/2 4 1/4 5 1/4 5T 3 1/ /4 5 1/4 254T 4 1/4 8 1/ /4 256T 4 1/ /4 284T 4 3/4 9 1/2 5 1/ T 4 3/ /2 7 4T 5 1/4 10 1/2 6 1/4 8 6T 5 1/ /4 8 Pump Model T W X Y Y Dim with Relief Valve 22F 1 NPT /16 2 1/2 3 19/ 3 1/8 32F 1 1/4" NPT 1 3/8 4 7/8 3 3/ 4 3/ 4 1/8 42F 1 1/2" NPT 1 15/ 4 1/8 4 13/ 5 13/ 3 3/4 52F 1 1/2" NPT 2 3/ / /16 4 3/4 62F 2 NPT 2 5/8 4 3/4 6 1/8 7 3/8 4 3/4 Z

15 Dimensions for Adapter Mounting 2B & 4300 Pumps to NEMA Frame Motors LP Y W Z T PIPE TAP X D B A Page 15 of 24 Pump Model 22B B B B B 4316 Motor Frame Size LP Adapter Adapter Kit /16 B51-56 B T, 145T 7 15/16 B51-56 B T, 184T 8 9/16 B B /16 32B B T, 145T 8 5/16 32B B T, 184T 8 15/16 32B B T, 5T 9 11/16 32B B T, 184T 9 3/4 52B B T, 5T 10 1/2 52B B T, 256T 11 3/16 52B B T, 286T 11 15/16 52B B T, 6T 12 11/16 52B B534-4 Motor Frame A B D / /16 3 1/2 143T 2 1/ /4 3 1/2 145T 2 1/ /4 3 1/2 182T 2 3/4 4 1/2 3 3/4 4 1/2 184T 2 3/4 5 1/2 3 3/4 4 1/2 3T 3 1/2 5 1/2 4 1/4 5 1/4 5T 3 1/ /4 5 1/4 254T 4 1/4 8 1/ /4 256T 4 1/ /4 284T 4 3/4 9 1/2 5 1/ T 4 3/ /2 7 4T 5 1/4 10 1/2 6 1/4 8 6T 5 1/ /4 8 Pump Model 22B B B B B 4316 T W X Y Y DIM WITH RELIEF VALVE Z 1 NPT /16 2 1/2 3 19/ 3 1/8 1 1/4" 4 1 3/8 4 7/8 3 3/ 4 3/ NPT 1/8 1 1/2" 1 15/ 4 1/8 4 13/ 5 13/ 3 NPT 3/4 1 1/2" 2 3/ / /16 4 NPT 3/4 4 2 NPT 2 5/8 4 3/4 6 1/8 7 3/8 3/4

16 Dimensions for Adapter Mounting K2B Pumps to NEMA Frame Motors LP Y W Z T PIPE TAP X D B A Page 16 of 24 Pump Model 4K1B 6K1B Motor Frame Size LP Adapter Adapter Kit /8 3K1B K1B T, 145T 8 5/8 3K1B K1B T, 184T 9 1/8 3K1B K1B T, 5T 10 1/4 3K1B51-3 3K1B T, 184T 10 5/16 5K1B K1B T, 5T 11 1/16 5K1B51-3 5K1B T, 256T 11 7/8 5K1B K1B T, 286T 12 7/8 5K1B K1B T, 6T 13 3/4 5K1B51-4 5K1B534-4 Motor Frame A B D / /16 3 1/2 143T 2 1/ /4 3 1/2 145T 2 1/ /4 3 1/2 182T 2 3/4 4 1/2 3 3/4 4 1/2 184T 2 3/4 5 1/2 3 3/4 4 1/2 3T 3 1/2 5 1/2 4 1/4 5 1/4 5T 3 1/ /4 5 1/4 254T 4 1/4 8 1/ /4 256T 4 1/ /4 284T 4 3/4 9 1/2 5 1/ T 4 3/ /2 7 4T 5 1/4 10 1/2 6 1/4 8 6T 5 1/ /4 8 Pump Model T W X Y Y DIM WITH RELIEF VALVE 4K1B 1 NPT 1 3/16 3 3/4 3 19/ 4 19/ 3 3/4 6K1B 2 NPT 1 3/4 4 3/4 5 9/ /16 4 3/4 Z

17 Dimensions for Series Mounting Feet (281, 381, 3K81 & 581) (FOR 2 SIZE PUMPS) (FOR 5 & 6 SIZE PUMPS) (4) UN-2B TAP THRU 8 X Ø 13 DRILL THRU 3 ( 1 8 ) 29 (2 2 1 ) ( 3 8 ) ( 5 8 ) (FOR 3 & 4 SIZE PUMPS) (4) UN-2B TAP ( 1 8 ) (3 19 ) Ø TYP TYP TYP. 15 TYP TYP TYP ( 1 8 ) (3 1 8 ) ( 1 2 ) TYP. 15 TYP K81 (FOR 2, 3 & 4K1B SIZE PUMPS ONLY) (8) Ø 11 DRILL THRU ( 1 8 ) (3 1 8 ) ( 1 2 ) TYP. 15 TYP. Page 17 of 24

18 4310 Pump Mounting Dimensions P T PIPE TAP Z L O N X ØU ØB B.. ØS D WOODRUFF E E H M G OVERALL LENGTH WITH RELIEF VALVE FEATURE F L BL BO BN WOODRUFF BALL BEARING FEATURE WITH PRESSURE RELIEF VALVE FEATURE Model B G D E F H K L M N O /8 7 9/16 8 / 3 1 1/4 1 19/ 13/ # / / 2 17/ 5 1/ /8 8 17/ 9 17/ 3 7/8 1 1/2 SLOT 15/ # /16 SLOT 2 1/2 5 7/ /8 9 27/ 10 7/ 3 7/8 1 1/2 SLOT 15/ # / SLOT 2 1/2 5 7/ / / /8 4 3/4 1 1/2 SLOT 15/ # /8 SLOT 3 13/ 6 1/ /8 12 3/8 13 5/8 4 3/4 1 1/2 SLOT 15/ # /8 SLOT 3 13/ 6 1/4 Model P S T U X Z BL BN BO / 3 1/4 1 NPT 5/8 3 11/16 3 1/8 6 1/ / 5 1/ /8 3 3/4 1 1/4" NPT 3/4 4 7/8 4 1/8 6 13/ / 5 7/ /2 3 3/4 1 1/2" NPT 3/4 4 1/8 3 3/4 6 29/ 1 25/ 5 7/ /2 3 3/4 1 1/2" NPT /4 8 5/8 2 9/16 6 1/ /8 3 3/4 2 NPT 1 4 3/4 4 3/4 8 7/8 2 9/16 6 1/4 Page 18 of 24

19 4300 Pump Model Number System Pump Sub-Group Size Pump Option Rotation for Valved Models Modifications SAE Port Option Positions Pos. 1 & 2 - Pump 43 Pos. 3 - Sub Group 1 Pos. 4 - Size Series Port Sizes Pos. 5 - Pump Options V = Valve N = Outboard Ball Bearing U = over Rotated 180 Pos. 6 & 7 - Rotation (Valved Models) = lockwise = ounterclockwise Pos. 8, 9, 10, 11, & 12 - Modifications 5 = Neoprene Seal 7 = Viton Seal = Abrasion Resistant Seal 8 = EPR Seal N = No Flat/Keyway in Shaft Pos. 13, 14, & 15 - SAE Port Option SAE (NPT Standard) Port Pump Size Style Size STD SAE NPT 1 1/4" - STD /2" - - STD. STD STD. 16 OPT OPT. OPT OPT. - Model Number is Stamped on a Metal Tag on the over TUTHILL OPT Pump Temperature Limits Material Minimum Maximum arbon Bushing -100 F 500 F Viton -10 F 375 F Neoprene -40 F 200 F Ethylene Propylene (EPR) -40 F 300 F Note: A pump s performance is dependent on more than just the temperature ranges of the component materials. Page 19 of 24

20 4300 Pump Materials of onstruction Part Name Material Standard omments Availability Housing ast Iron ASTM A48 96a lasses 30, 35, or 40 Std. Bracket ast Iron ASTM A48 96a lasses 30, 35, or 40 Std. arbon arbon Graphite Resin Std. Bracket Bushing eramic Alumina eramic, Diamonite Std. on 4230 & 4330 Models over ast Iron ASTM A48 96a lasses 30, 35, or 40 Std. Rotor Steel 1137 or 1141 Steel Forging Std. Idler Steel 1117 Std. Idler Pin Steel 1117 Heat Treated Std. Idler Bushing arbon arbon Graphite Resin Std. Seal Gland ast Iron ASTM A48 96a lasses 30, 35, or 40 DU Bushing Only on 4310 models Std. Viton STD O-Ring & Seal Neoprene Opt. EPR Opt. Opt. 4000/ ross Reference List 4310 Pumps 2B Pump 4310 Series Additional Features B - arbon Bracket Bushing vs. Bronze - Steel Idler Gear vs. Powdered Metal - arbon Idler Bushing vs. None B - arbon Bracket Bushing vs. Bronze - Steel Idler Gear vs. Powdered Metal - arbon Idler Bushing vs. Bronze B Same as Above B Same as Above B Same as Above Options -V, -5, -8, and Mounting Feet (281, 381 & 581) are available on both pumps. Note: The Tuthill reversing feature is not available on 4000 pumps pumps have the same assembled dimensions as their 2B pump counterparts. Page 20 of 24

21 09 Pump/NEMA Motor Mounting Dimensions T L L A PORT TO PUMP SUTION TO PUMP SUTION O H ØD MTG. HOLES F X B N E Y 2L T (4) ØP HOLES R S V ØU ØK ØJ M N Motor Frame Size A B D E F H J K L M N O /64 8 5/16 11/ 4 7/ /2 5 7/8 4 1/2 2 1/2 2 53/ /64 17/ 143T 1 NPT 5 5/64 8 5/16 11/ 5 1/ /2 5 7/8 4 1/2 2 1/2 2 53/ /64 17/ 145T 5 5/64 8 5/16 11/ 5 1/ /2 5 7/8 4 1/2 2 1/2 2 53/ /64 17/ Motor Frame Size P R S T U V X Y 56 15/ 4 13/16 3/ / 5/8 15/64 3 3/4 6 3/16 143T 15/ 4 13/16 3/ / 7/8 15/ /8 145T 15/ 4 13/16 3/ / 7/8 15/ /8 Page of 24

22 015, 020 & 030 Pump/NEMA Motor Mounting Dimensions T L L A PORT TO PUMP SUTION O H ØD MTG. HOLES F X B N E Y 2L T TO PUMP SUTION (4) ØP HOLES R S V ØU ØK ØJ M N Motor Frame Size A B D E F H J K L M N /2 NPT 5 23/ /64 11/ 4 7/ /2 5 7/8 4 1/2 3 1/4 2 47/ / 143T 1 1/2 NPT /64 11/ 5 1/ /2 5 7/8 4 1/2 3 1/4 2 47/ / 145T 1 1/2 NPT /64 11/ 5 1/ /2 5 7/8 4 1/2 3 1/4 2 47/ / Motor Frame Size O P R S T U V X Y 56 5/8 15/ 4 3/8 3/ /64 5/8 15/64 3 3/4 6 3/16 143T 5/8 15/ 5 17/64 3/ /64 7/8 15/ /8 145T 5/8 15/ 5 17/64 3/ /64 7/8 15/ /8 Page 22 of 24

23 Pump Model Number System Pump Series Material of onstruction Frame Size Pump Size Porting Seal Elastomer Rotaion Valve Type Special Modification Position # Pos. 1 & 2 - Pump Series Pos. 3 - Material of onstruction I = Iron Pos. 4 - Frame Size 1 = 5/8 (56) 2 = 7/8 (143/145T) Pos. 5, 6, & 7 - Pump Size Pos. 8 - Porting 1 = NPT Pos. 9 - Seal Elastomer 3 = Buna 5 = Neoprene 7 = Viton 8 = EPR 9 = Other (All Type 2) Pos. 10 & 11 - Rotation = lockwise = ounterclockwise Pos Valve Type V = Relief Valve Pos Special Modification Assigned by Tuthill Pump Group engineering as required Pump Temperature Limits Material Minimum Maximum arbon Bushing -100 F 500 F Viton -10 F 375 F Notes: A pump s performance is dependent on more than just the temperature ranges of the component materials. Pump Materials of onstruction Part Name Material Availability Standard omments Housing ast Iron Std. ASTM A48 96a lasses 30, 35, or 40 over ast Iron Std. ASTM A48 96a lasses 30, 35, or 40 Rotor Ductile Iron Std. ASTM A536 Ductile Iron Grade Idler Ductile Iron Std. ASTM A536 Ductile Iron Grade Idler Pin Steel Std Heat Treated Idler Bushing arbon Std. arbon Graphite Resin Relief Valve Body ast Iron Std. ASTM A48 96a lasses 30, 35, or 40 Relief Valve Block-Off Plate Steel Std. ASTM A36 Gaskets Standard Std. Oriented Polyester Standard Std. Garlock Used for Relief Valve Pumps Only Seal Viton Std. Page 23 of 24

24 Pump NPSH Data NPSH Required for Tuthill Series pumps SSU Pump Series FT FT FT FT Notes: For liquid viscosity up to 750 SSU NPSHA (Net Positive Suction Head Available) must be greater than the NPSHR (Net Positive Suction Head Required) value provided in the table. Values above are for feet of liquid with a Specific Gravity of (1.0). Viscosity orrection Factor 1000 SSU 1500 SSU 2000 SSU 2500 SSU 1.15 orrection Factor 1.20 orrection Factor 1.25 orrection Factor 1.3 orrection Factor Tuthill Pump Group USA United Kingdom hina Excellence at work. Excellence in life.