Spur gearing, Helical gearing [mm/iso] Pinion Gear ii Project information? i Calculation without errors.

Size: px

Start display at page:

Download "Spur gearing, Helical gearing [mm/iso] Pinion Gear ii Project information? i Calculation without errors."

Rudolph Jayson Caldwell
5 years ago
Views:

1 S Spur gearing, Helical gearing [mm/iso] i Calculation without errors. Pinion Gear ii Project information? Input section 1. Options of basic input parameters 1.1 Transferred power Pw [kw] Speed (Pinion / Gear) n [/min] [/min] 1.3 Torsional moment (Pinion / Gear) Mk [Nm] [Nm] 1.4 Transmission ratio / from table i Actual transmission ratio / deviation i 4.12.% 2. Options of material, loading conditions, operational and production parameters 2. Material identification according standard : 2.1 Material of the pinion : 2.2 Material of the gear : 2.3 Loading of the gearbox, driving machine - examples 2.4 Loading of gearbox, driven machine - examples 2.5 Type of gearing mounting 2.6 Accuracy grade - ISO1328 Ra max v max ISO E...Carbon cast steel 36 Mn 5 (Rm=7 MPa) tooth face hard. E...Carbon cast steel 36 Mn 5 (Rm=7 MPa) tooth face hard. B...Light shocks C...Moderate shocks Double-sided symmetrically supported gearing - type (Ra max.= 1.6 / v max.= 3) 2.7 Coefficient of one-off overloading KAS Desired service life Lh 2 [h] 2.9 Coefficient of safety (contact/bend) SH / SF Automatic design 3. Parameters of the cutting tool and tooth profile

2 4. Design of a module and geometry of toothing 4.1 Number of teeth Pinion / Gear z Normal pressure angle α Base helix angle β Setting of the ratio of the width of the pinion to its diameter 4.5 The ratio of the pinion width to its diameter ψ d / max 1.1 < Module / Standardized value mn Reference diameter Pinion / Gear d1/d Recommended width of gearing Face width (Pinion / Gear) b1/b Working face width bw The ratio of the pinion width to its diameter ψ d / max 1.1 < Working center distance aw Approximate weight of the gearing m [kg] 4.14 Minimum coefficient of safety SH / SF Normal backlash Recommended min. max. value Selected normal backlash jn

3 5. Correction of toothing (Addendum modification) 5.1 Types Permissible undercutting of teeth (min. value) Σ= Preventing undercutting of teeth (min. value) Σ= Prevents tapering of teeth (min. value) Σ= Pinion addendum modification coefficient setting 5.6 Addendum modification coefficient Pinion / Gear x Sum of addendum modification coefficients min. value Σx.8826 > Transverse / Total contact ratio εα/εγ Unit tooth thickness on the tip diameter sa* Specific sliding on tooth root ϑa1/ϑe Specific sliding on tooth tip ϑe1/ϑa Sum of all specific slidings Sum ϑ Safety coefficient for surface durability SH Safety coefficient for bending durability SF Display of tooth and tool turn for: Gear

4 6. Basic dimensions of gearing Results section 6.1 Number of teeth Pinion / Gear z Face width (Pinion / Gear) b Normal module mn Transverse module mt Circular pitch p Transverse circular pitch pt Base circular pitch ptb Center distance (pitch) a Center distance (production) av Center distance (working) aw Pressure angle α Transverse pressure angle αt Pressure angle at the pitch cylinder αwn Transverse pressure angle at the pitch cylinder αwt Helix angle β Base helix angle β b Tip diameter da Reference diameter d Base diameter db Root diameter df Operating pitch diameter dw Addendum ha Dedendum hf Tooth thickness on the tip diameter sna Tooth thickness on the tip diameter sta Tooth thickness on the pitch diameter sn Tooth thickness on the pitch diameter st Tooth thickness on the root diameter sb Unit tooth thickness on the tip diameter sa* Unit correction dy Total unit correction x1+x Addendum modification coefficient x

5 Supplemental parameters of gearing Qualitative indices of gearing Coefficients for safety calculation Safety coefficients 1.1 Safety coefficient for surface durability SH Safety coefficient for bending durability SF Safety in contact in one-time overloading SHst Safety in bending in one-time overloading SFst Variability coefficient for calculation of probability of a failur vh/vf Probability of a failure P.44 [%] 1.7 Nominal contact stress SigmaH [MPa] 1.8 Contact stress SigmaH [MPa] 1.9 Pitting stress limit SigmaHG [MPa] 1.1 Permissible contact stress SigmaHP [MPa] 1.11 Nominal tooth-root stress SigmaF [MPa] 1.12 Tooth-root stress SigmaF [MPa] 1.13 Tooth-root stress limit SigmaFG [MPa] 1.14 Permissible bending stress SigmaFP [MPa] Check dimensions of gearing Force conditions (forces acting on the toothing) 12.1 Tangential force Ft Normal force Fn Axial force Fa Radial force Fr Bending moment Mo [Nm] 12.6 Peripheral speed on the pitch diameter v vmax 1.73 < 3 [m/s] 12.7 Specific load / Unit load wt wt* [N/mm MPa] 13. Parameters of the chosen material

6 Additions section 14. Calculation of gearing for the given axis distance 14.1 Required axis distance / Standardized aw List of solutions ID. z1 z2 i β Sum X 14.3 Combination of the teeth number Number of teeth Pinion / Gear z1/z Transmission ratio / Deviation i % 14.6 A. Change of the addendum modification 14.7 Base helix angle β Total unit correction Sum x Distribution of correction 14.1 Type of distribution of corrections to the pinion and gear x According to Meritt Press the button for transmitting values in to calculation B. By a change of the helix angle Base helix angle β Total unit correction Sum x Press the button for transmitting values in to calculation

Spur gearing, Helical gearing [mm/iso] Pinion Gear ii Project information? i Calculation without errors.

S Spur gearing, Helical gearing [mm/iso] i Calculation without errors. Pinion Gear ii Project information? Input section 1.0 Options of basic input parameters 1.1 Transferred power Pw [kw] 100.000 99.050