Driven Toolholders for HAAS Machines

Transcription

1 riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE

2 Tale of Contents Type Page riven Toolholders SL 20 / SL Modular Tool System mi Basic Toolholders Collet Chucks Comination Shell End Mill Arors Weldon Toolholders Whistle-Notch Toolholders Synax Tapping Quick Change Holder Softsynchro Chucks (Licence Emuge Hydraulic Chucks Shrink fit Chucks Accessories Blank Test Mandred Tool-presetting unit Wrench Assemling jig Protection plug VI Toolholders IN Blank Radial Toolholder Axial Toolholder Collet Chuck Accessories Wrenches Clamping Nuts Collet Sets ER Seal isc Reducing Sleeve, slottet Reducing Sleeve mimatic Tool Systems for Sustainaility and Efficiency Tools according to the policy of BLUecoMPETENCE are marked in this catalogue. More information on the program (Initiative) of the VMA see pages in the main catalogue. 2

3 Selection According to Tool Type Connectale in accordance with BLUecoMPETENCE» mimatic mi» PolyMILL» TriMILL» TrioCut» PolyREAM Manufacturer Page Straight Unit HAAS 10 Angle Unit HA AS 11 3

4 As a medium-size company with gloal activities, we are developing and producing CNC precision standard and special tools for the automotive, mechanical engineering, aircraft and woodworking industries since The mimatic rand is acknowledged worldwide for its compliance with strict quality requirements in the context of integrated system solutions for the machining segment. The philosophy of the Company is ased upon synergy etween highly motivated staff and excellent standards in the areas of technology and quality development. These attriutes enale us to provide the perfect solution to every specific customer requirement. Products from mimatic riven toolholders for CNC lathes and machining centers Cutting tools Clamping systems Our quality systems have een approved since 1998 and we are certified to IN EN ISO 9001:2000. The know-how of our 140 employees worldwide is availale to you at any time on location. Many years ago we started to specialize in the production of driven toolholder units for metal processing. These are installed on CNC lathes. Our products are used for large volume manufacturing and facilitate complete processing without multiple clamping of complex workpieces. Our products contriute towards constant improvements in our customers production processes due to the use of the most modern technology allied to the highest levels of quality. 4

5 Operation with Star-type Turrets Tools are fixed on the the revolver circuit! The orientation of the revolver to the spindle is important. Machines with Star-type Turrets often come with a su spindle. Right- and Left-hand Versions on Star-type Turrets with Main- and Su-Spindle Axes Turret type 1 X Turret type 2 Su spindle Main spindle Y Z1 Z righthand lefthand righthand lefthand C2 Z1 C1 Turret type 3 Turret type 4 righthand lefthand righthand lefthand Left-hand Version Please note dimension L1 Right-hand Version Please note dimension L1 L1 L1 Please check interference circles with fixed tools! 5

6 Versions Our oring and milling units are suitale for most of the popular turning machines and lathe equipment manufacturers. We produce the following types: Straight and offset units Internal and/or external coolant supply Gear multiplication or reduction Single or multi-spindle versions Angle heads for the production of angled holes, y means of adjustale and fixed angles Sawlade holders for sawing or slotting of workpieces Every popular type of tool system can e supplied Technology and quality is at the forefront of our usiness: Highly precise earing technology (high quality spindle and taper roller earings) Specially optimized gears guarantee an excellently smooth run High torque transmission, rigidity and RPM`s Highest concentricity and facing accuracy < 3 µm Internal coolant supply up to 70 ar Use of high pressure seals und friction optimized special seals Additional layrinth seals protect the earings from the penetration of dirt and coolant Internal clamping nut guarantees a compact tool length and optimum earing positioning ensures maximum axial and radial support at the spindle and high staility Alignment pins/locks on angle units for minimum setup time and fine centreline adjustment Limited dry usage of driven toolholders with internal coolant through the spindle (i.c.). Running in dry condition should e avoided. Tools should frequently run with coolant. Easily changeale from internal or external coolant supply. The coolant filtering capailities of the machine should e 40 µm or less. Modular Quick Change System mimatic mi Advantages Universal tool clamping system for all production areas Presetting of the tools off-line y length adjustment screw Tool change within seconds Concentricity of the interface < 0,002 Secure holding force y form-locking Very short design Toolholders in different sizes All toolholders with internal coolant Modular Toolholders in different Sizes for all Production Areas Tapping toolholders Collet toolholders (internal and external nut) Hydro-Flex hydraulic toolholders Thread tightening toolholder cutters Morse taper shank toolholders Weldon and Whistle Notch toolholders Shell mill toolholders All toolholders are availale for use with your presetter. Find more information of mimatic mi on pages Tool System Examples Weldon Coromant ABS Shell Mill Aror UTS Tapping Chuck HSK Collet Hydraulic ISO-Shank Capto TM Sawlade Aror 6

7 Performance Values The torques M max specified in the tales elow refer to shock-free processing (e.g. threaded cutting). For processes involving major shock loads (e.g. milling or multi-edge knocking), a value reduction of up to 50 % and more needs to e taken into account. The values n max and P max rendered are guideline values for short-time operation. The permissile relative operating duration depends on the version of the spindle unit (with or without gear) on the presence of a cooling system and the type of cooling (external or internal through the tool spindle) on the processing torque At a charge of aout 60 % of the maximum values the working life calculated amounts to approx hours Spindle units with gears produce more noise at higher speeds! Operating Instructions Initial Start-up: To ensure long tool life it is important to properly run-in the tools. This procedure serves to reduce the internal friction in the driven unit and to evenly distriute the grease in the precision earings. Max. RPM in the first operation hour should not exceed 70 % of the maximum permissile RPM. Never run the tool aove the maximum permissile torque rate and/or maximum permissile RPM (see also the drawing of the unit). Tools with internal coolant through the spindle (i.c.): To avoid premature wear and damage to the seal system we recoend to filter the coolant to 40 µm minimum. Filter grades of 40 µm worked in operation with very good results. The maximum permissile coolant pressure can e taken from the technical data of the driven toolholder. riven Toolholders with internal coolant through the spindle (i.c.) should never run without coolant. The coolant should flow through the tool, efore the tool drive is switched on. Running in dry condition damages the internal seals. Service interval: The tool life of the driven toolholder depends strongly on the application. Wear parts such as earings and seals should e exchanged. We recoend to send the tools at least once annually to our service center for cleaning and regreasing. Tools with internal coolant through the spindle should e serviced every 6 months. Optimum Relative Cycle Times (Guideline Values) n max. % Favorale conditions Unfavorale conditions etermination of the maximum permissile cycle times per minute E max The maximum permissile cycle times per minute may not e under any circumstances exceeded. 50 CT max: maximum permissile cycle times in percent per minute (%/min.) % E 7

8 SL 20 / 30 / 40 ata Machin type series Turret Stations SL SL SL Star-type Turret VI 40 Interference Circles Machine type Series F SW WL SL 20 SL 30 SL 40 8

9 SL 20 / 30 / 40 Connectale in accordance with BLUecoMPETENCE» mimatic mi» PolyMILL» TriMILL» TrioCut» PolyREAM riven Toolholders Page Page Straight Unit Angle Unit Options and Accessories mi Toolholders mi System escription Toolholders Accessories Standard VI Toolholders VI Toolholders Accessories Accessories Collets IN 6499 Threading Collets Wrenches Clamping Nuts Sleeves and Bushings elivery information riven toolholders with mi quick-change interface are supplied with operating wrench (see spare parts on page 21). riven toolholders with other interfaces are supplied without clamping wrench (see accessories on page 33). 9

10 Straight Unit Connectale in accordance with BLUecoMPETENCE» mimatic mi» PolyMILL» TriMILL» TrioCut» PolyREAM for Manufacturer for Machine type SL 20/30 S = 104,85 SL 40 S = 117,55 imensions Turret type Star-type Turret Shank VI 40 rive Contrate Toothing Modular Interfaces Tool holder Clamping range Torque max. n1/n2 (max.) (r.p.m.) Gear Ratio Coolant L B B1 T S Rotating direction ER Nm - i = 1:1 external 75, , ER Nm - i = 1:1 external 75, , ER 32* Nm / i = 1:1 internal 75, , ER 32* Nm / i = 1:1 internal 75, , mi Nm / i = 1:1 internal 92, , mi Nm / i = 1:1 internal 92, ,55 10 * With clamping nuts with sealing, seals see page 34

11 Angle Unit Connectale in accordance with BLUecoMPETENCE» mimatic mi» PolyMILL» TriMILL» TrioCut» PolyREAM for Manufacturer for Machine type SL 20/30 S = 104,85 SL 40 S = 117,55 imensions Turret type Star-type Turret Shank VI 40 rive Contrate Toothing no reversion of Rotating Modular Interfaces Tool holder Clamping range Torque max. n1/n2 (max.) (r.p.m.) Gear Ratio Coolant L L1 L2 L3 L4 T S Rotating direction ER Nm / i = 1:1 external , ER Nm / i = 1:1 external , ER 32* Nm / i = 1:1 internal , ER 32* Nm / i = 1:1 internal , mi Nm / i = 1:1 internal , mi Nm / i = 1:1 internal ,55 * With clamping nuts with sealing, seals see page 34 11

12 Connectale in accordance with BLUecoMPETENCE» riven Tool Holders» PolyMILL» TriMILL» TrioCut» PolyREAM Tale of Contents Size Standard Page Basic Toolholders SK 40/50 IN BT 40/50 MAS-BT 14 HSK 63 IN Collet Chucks ER 11 - ER 40 IN Comination Shell End Mill Arors Ø Weldon Toolholders Whistle-Notch Toolholders Ø 6-25 IN 1835 B 16 Ø 1/4-1/0 IN 1835 B 16 Synax Tapping Quick Change Holders Ø 3, Softsynchro Chucks (Licence Emuge) M4-M12 17 Hydraulic Chucks Ø Accessories 18 Shrink fit Chucks Ø Accessories 19 Accessories Blank Test Mandred Tool-presetting unit Wrench Assemling jig Protection plug

13 Advantages Universal tool clamping system for all production areas Presetting of the tools off-line y length adjustment screw Tool change within seconds Concentricity of the interface < 0,002 Secure holding force y form-locking Very short design Toolholders in different sizes All toolholders with internal coolant Use on CNC-Turning Machines and Machining Centers riven toolholders for all turning machines, machining centers, milling machines, turn/mill centers as well as transfer and special machines. riven toolholders / asic holders are availale in many different versions: Shafts such as VI, SK, BT, CAT, HSK, Capto,... Straight and angle units Single or multi-spindle versions Gear multiplication or reduction Internal and/or external coolant supply Central or offset Modular Toolholders in ifferent Sizes for All Production Areas Tapping toolholders Collet toolholders (internal and external nut) Hydro-Flex hydraulic toolholders Thread tightening toolholder cutters Morse taper shank toolholders Weldon and Whistle Notch toolholders Shell mill toolholders All toolholders are availale for use with your presetter. mi Operation Insert the toolholder into the spindle of the driven toolholder 3 alls inside the modular mimatic mi interface guide the toolholder into the proper position Turn the toolholder until it is locked Clamping the sleeve nut y using the mimatic one hand key To unclamp the toolholder just follow all steps in reverse order The axial and conical surface guarantee highest concentricity All toolholders are with internal coolant and availale in different sizes Basic Holders Toolholders 13

14 Connectale in accordance with BLUecoMPETENCE» riven Tool Holders» PolyMILL» TriMILL» TrioCut» PolyREAM Basic Holders IN A/B MAS-BT JIS 6339 A Size SK Size BT A mi 32 SK 30 53, mi 40 SK 40 53, mi 50 SK 40 53, mi 50 SK 50 53, mi 63 SK 50 58, mi 32 BT 30 45, mi 40 BT 40 48, mi 50 BT 40 56, mi 50 BT 50 61, mi 63 BT 50 70,0 77 IN A Size HSK A mi 40 HSK 50 60, mi 50 HSK 63 78, mi 50 HSK , mi 63 HSK ,

15 Connectale in accordance with BLUecoMPETENCE» riven Tool Holders» PolyMILL» TriMILL» TrioCut» PolyREAM Collet Chucks IN 6499 Type ER short type long type clamping nut inside clamping nut outside with internal coolant with internal coolant l2 l1 l1 l2 Size Collet Size Collet l1 l mi 32 ER 11 41, mi 32 ER 16 41, mi 32 ER 20 59, mi 40 ER 16 45, mi 40 ER 20 49, mi 40 ER 25 55, mi 50 ER 25 55, mi 50 ER 32 59, mi 63 ER 32 63, mi 63 ER 40 69, mi 32 ER 11 72,5 46, mi 32 ER 16 64,5 38, mi 40 ER 16 73,0 39, mi 40 ER 20 80,0 46, mi 50 ER 25 82,0 41, mi 50 ER 32 88,0 47, mi 63 ER 32 96,0 47, mi 63 ER 40 94,5 45,5 75 Comination Shell End Mill Aror without internal coolant Hydraulic Chuck with internal coolant Size l1 l2 l3 d h6 Size l1 l2 l3 d h mi 32 66,0 39, mi 40 73,5 39, mi 50 82,0 41, mi 50 88,0 47, mi 63 96,0 47, mi 63 98,0 49, mi mi

16 Connectale in accordance with BLUecoMPETENCE» riven Tool Holders» PolyMILL» TriMILL» TrioCut» PolyREAM Weldon Toolholder IN 1835 B with internal coolant Whistle Notch Toolholder IN 1835 E with internal coolant l1 l2 l3 d H5 Size Size / l1 l2 l3 d H5 / mi 32 52, , mi 32 52, , mi 32 55, , mi 32 57, , mi 32 52, ,0 1/ mi 32 55, ,0 3/ mi 32 57, ,0 1/ mi 40 60, , mi 40 60, , mi 40 63, , mi 40 65, , mi 40 65, , mi 40 68, , mi 40 60, ,0 1/ mi 40 63, ,0 3/ mi 40 65, ,0 1/ mi 40 68, ,0 5/ mi 50 65, , mi 50 66, , mi 50 70, , mi 50 73, , mi 50 73, , mi 50 74, , mi 50 78, , mi 50 65, ,0 1/ mi 50 40, ,0 3/ mi 50 73, ,0 1/ mi 50 75, ,0 5/ mi 50 78, ,0 3/ mi 63 81, , mi 63 82, , mi 63 85, , mi 63 88, , mi 63 88, , mi 63 91, , mi 63 93, , mi , mi 63 81, ,0 1/ mi 63 85, ,0 3/ mi 63 88, ,5 1/ mi 63 91, ,0 5/ mi 63 93, ,0 3/ mi ,0 1/ mi 32 52, , mi 32 52, , mi 32 55, , mi 32 57, , mi 32 52, ,0 1/ mi 32 55, ,0 3/ mi 32 57, ,0 1/ mi 40 60, , mi 40 60, , mi 40 63, , mi 40 65, , mi 40 65, , mi 40 68, , mi 40 60, ,0 1/ mi 40 63, ,0 3/ mi 40 65, ,0 1/ mi 40 68, ,0 5/ mi 40 89, , mi 50 65, , mi 50 66, , mi 50 70, , mi 50 73, , mi 50 73, , mi 50 75, , mi 50 78, , mi 50 65, ,0 1/ mi 50 70, ,0 3/ mi 50 73, ,0 1/ mi 50 75, ,0 5/ mi 50 78, ,0 3/ mi 63 81, , mi 63 82, , mi 63 85, , mi 63 88, , mi 63 88, , mi 63 91, , mi 63 93, , mi , mi 63 81, ,0 1/ mi 63 85, ,0 3/ mi 63 88, ,5 1/ mi 63 91, ,0 5/ mi 63 93, ,0 3/ mi ,0 1/

17 Connectale in accordance with BLUecoMPETENCE» riven Tool Holders» PolyMILL» TriMILL» TrioCut» PolyREAM SYNAX Tapping Quick Change Holder without internal coolant, with synchronisation and length compensation with internal coolant (70 ar), only synchronisation l1 l2 d Size SW Size l1 l2 d SW mi 40 17,0 25 3,5 48 2, mi 40 17,0 25 4,5 48 3, mi 40 17,0 27 6,0 48 4, mi 40 17,0 27 8,0 48 6, mi 40 38,0 28 9,0 48 7, mi 40 38, ,0 48 8, mi 40 38, ,0 48 9, mi 50 16,5 25 3,5 58 2, mi 50 16,5 25 4,5 58 3, mi 50 16,5 27 6,0 58 4, mi 50 16,5 27 7,0 58 5, mi 50 16,5 27 8,0 58 6, mi 50 16,5 28 9,0 58 7, mi 50 16, ,0 58 8, mi 50 44, ,0 58 9, mi 50 16, ,0 58 9, mi 50 44, , , mi 40 17, , mi 40 17, , mi 40 38, , mi 40 38, , mi 40 38, , mi 50 16, , mi 50 16, , mi 50 16, , mi 50 16, , mi 50 16, , mi 50 16, , mi 50 44, ,0 Softsynchro Chuck (Licence Emuge) with internal coolant, with push and pull length compensation 0,5 Chuck for GB Collets with internal coolant, with push and pull length compensation ± 0,5 Size Collet Thread l1 d mi 40 ER-GB 16 M4-M12 47,5 4, mi 50 ER-GB 16 M4-M12 44,5 4, Size Collet L mi 40 ER 20 GB(1-13) mi 50 ER 25 GB(1-16) mi 63 ER 32 GB(2-20)

18 Connectale in accordance with BLUecoMPETENCE» riven Tool Holders» PolyMILL» TriMILL» TrioCut» PolyREAM Accessory for Hydraulic Chucks Sleeve without horizontal adjustment with horizontal adjustment 1 d h6 / L1 L2 L3 2 1 d h6 / L1 L2 L / / / / / / / / / / / / / / / / / / / / / / with horizontal adjustment

19 Connectale in accordance with BLUecoMPETENCE» riven Tool Holders» PolyMILL» TriMILL» TrioCut» PolyREAM Shrink fit Chuck with internal coolant Accessory for Shrink fit Chucks Sleeve Size l1 l2 l3 d h6 L L1 d h mi mi mi mi mi mi mi mi mi mi mi ,5 7,5 2, ,5 9,0 3, ,5 10,5 3, ,5 12,0 4, ,5 13,5 4, ,5 15,0 5, ,5 16,5 5,5 8 Blank Test Mandrel dh6 l2 l1 Size l1 l2 Size l1 l2 d h mi 32 76, mi 40 94, mi , mi , mi mi mi mi mi

20 Tool Presetting Unit Size HSK A Size SK A mi mi mi , mi mi , mi mi mi mi mi mi mi mi Size VI A mi mi mi mi

21 Accessories for mi-system Complete Wrench for One-hand Operation Socket Wrench for Torque Wrench L Size Size L Wrench size mi 25, mi 32, mi mi 50, mi mi 25, mi 32, mi / mi 50, mi /4 Protection Plug Assemling Jig Size Size L B H mi mi mi mi SK HSK VI

22 Connectale in accordance with BLUecoMPETENCE» riven Tool Holders» PolyMILL» TriMILL» TrioCut» PolyREAM mimatic mi An Epitome of BlueCompetence mimatic Tool Systems for Sustainaility and Efficiency Tools according to the policy of BLUecoMPETENCE are marked in this catalogue. More information on the program (Initiative) of the VMA see pages mi The Integrated Tool Solution = riven Tool Holder + mi Interface + mi Tool Advantages mi Interface, riven Tool Sided n short taper + planar arrangement n shorter construction n convenient single-hand operation n syetrical 3-point intake mi Fast Change n in the machine n minimal tool changing time n no pre-adjustment necessary mi Chipping Tool n compact one-piece design n milling, counteroring, planing, chamfering n shells, shaft,... BlueCompetence Implemented with mimatic mi Old = Industrial Standard Machine Tool Interface riven Tool Holder Angle Head Modular Quick-Change Interface Modular Adapter Interface Holder Interface CT-CI New = mimatic Innovation Machine Tool Interface riven Tool Holder Angle Head Modular Quick-Change Interface Modular Single-Piece Adapter Insert Fixture CT-CI 22

23 Connectale in accordance with BLUecoMPETENCE» riven Tool Holders» PolyMILL» TriMILL» TrioCut» PolyREAM mi System Solutions for Special Production Assignments riven tool holders with mi quick-change interface must e adapted to the machining task in your dimensioning, and/or take this task into account: riven Tool Holder - mi Straight Unit riven Tool Holder - mi Angle Unit as regards the cutting forces and/or torque occurring and as regards the precision required» rigidity of the system It is thus necessary to descrie the planned machining processes as exactly as possile, so that the optimal technical and economic suggestion can e worked out. Because then it is ensured that the requirements for precision, efficiency and sustainaility are fulfilled. mi - Milling Tool 5 different CT plates n chamfering n milling threads n milling planes n counteroring Material: AlMgSi1 (IN ) mi - Cutting Tool n jiggering n chamfering Materials: 1. 20MnVS6 2. X15 CrNiSi20 (IN ) mi - Cutting Tool n twist drill n jiggering n planing Material: Al-Si7Mg mi - Cutting Tool n drilling n planing n VHM twist drill n chamfering mi - Milling Tool n contour milling Material: 16MnCrS5 mi - Milling Tool n groove milling Material: steel mi - Milling Tool n groove milling Material: steel mi - Counteroring Tool (jiggering) n preturning n finish-turning n planing n chamfering Material: Al-Si7Mg mi - Milling Tool n groove milling Material: steel mi - Milling Tool n groove milling Material: steel 23

24 Tale of Contents Type Page VI Toolholders IN Blank A1 rectangular A2 round Radial Toolholder B1 right-hand, short B2 left-hand, short B3 overhead, right-hand, short B4 overhead, left-hand, short B5 right-hand, long B6 left-hand, long B7 overhead, right-hand, long B8 overhead, left-hand, long Axial Toolholder C1 right-hand C2 left-hand C3 overhead, right-hand C4 overhead, left-hand 1 Axial Multiple Toolholder 2 Axial Multiple Toolholder, overhead U-rill Holder Boring Bar Holder Boring Bar Holder E2 Boring Bar Holder E2 slotted Universal Chuck Collet Chuck OZ E3 IN 6388 ER E4 IN 6499 Morse Taper Holder Bar Puller Quick Change Tapping Chucks Material Stop Protection Plug Accessories Wrenches Clamping Nuts Collet Sets ER Seal isc Reducing Sleeve, slottet Reducing Sleeve

25 VI Toolholders Our toolholders for CNC lathes feature cylindrical shanks acc. to IN 69880/VI They are made from case hardened steel, the hardness of the wearing surfaces is 58 ± 2 HRC. All functional surfaces are ground and rowned. The toothing on the shank is ground. As far as technically possile, all tool holders are provided with internal coolant supply and adjustale all-type nozzles. They are fitted with a spring-loaded pressure plate. Further designs on request. Operation with Toolholders in Anti-clockwise Rotation Operation with Toolholders in Clockwise Rotation 25

26 VI Toolholders Blanks Radial Toolholders A1 rectangular B1 right-hand, short a h h2 a / / / / / / A2 round B2 left-hand, short d2 h2 a / / / / / / B3 overhead, right-hand, short h2 a / / / / / /

27 VI Toolholders Radial Toolholders B4 overhead, left-hand, short B7 overhead, right-hand, long h2 a h2 a / / / / / / / / / / / / B5 right-hand, long B8 overhead, left-hand, long h2 a h2 a / / / / / / / / / / / / B6 left-hand, long h2 a / / / / / /

28 VI Toolholders Axial Toolholders C1 right-hand C4 overhead, left-hand h2 a h2 a / / / / / / / / / / / / C2 left-hand 1 Axial multiple Toolholder h2 a h2 a / / / / / / / / / C3 overhead, right-hand 2 Axial multiple Toolholder, overhead h2 a h2 a / / / / / / / / /

29 VI Toolholders U-rill Holder Boring Bar Holder E1 d2 d4 d4 d3 h , , , , , , , , , , , , , , , , ,5 29

30 VI Toolholders Boring Bar Holder E2 E2S slotted d2 d4 d2 d3 l Universal Chuck Range A E , , , , , , , , , , , , , ,

31 VI Toolholders Collet Chuck Morse Taper Holder OZ E3 IN 6388 F d3 Range OZ MK h d , E , E , , E , E , E , E , E , E , , , , , , , , , , , , , , Bar Puller ER E4 IN 6499 Range ER d ,5-10 ER ER ,5-10 ER ,5-16 ER ,5-16 ER ,0-20 ER ,0-30 ER ,5-16 ER ,0-20 ER ,0-30 ER ,0-30 ER ,0-30 ER KH Range #1 # For two clamping ranges with reverse jaws 1 h1 l1 l2 l * * With reversile clamping jaws 31

32 VI Toolholders Quick Change Tapping Chucks With length compensation on traction and pressure Quick change insert with safety coupling d l Size Range Size d l SES , SES , SES , SES , SES , SES , SES , SES , SES , SES , SES , M10 SES , Mxx M8 -M20 SES , Mxx M14-M33 SES , Mxx M22-M48 SES ,0 68 Please specify the thread or the dimension of the tap. Represents new order numers from to Material Stop Protection Plug MW travelling, adjustale Z2 Steel/Plastic d2 d3 l2 h3 Material l , , , , , , , , , steel plastic steel plastic steel plastic steel plastic steel plastic steel plastic

33 Accessories Wrenches and Clamping Nuts Collet Sets Wrench for ER Clamping Nuts IN 6499-B, Class 2 Size Type Pieces Size Range ER ER ER ER ER ER ER 40 ER Clamping Nuts inlying inlying inlying inlying inlying inlying outlying ER ER ER ER ER IN 6499-B, (6 µm) Pieces Size Range Size Type ER ER ER ER ER ER 40 inlying inlying inlying inlying inlying inlying Internal coolant ER 16 inlying P ER 20 inlying P ER 25 inlying P ER 32 inlying P ER 40 inlying P ER 40 outlying ER 40 outlying P ER ER ER ER ER Threading Collets Type ET with length compensation ET Pieces Size Range ,5-6 M1-M ,8-9 M2-M ,5-12 M4-M ,0-16 M4-M22 Hook wrench to hold against Size Type IN IN 1810 A IN 1810 B ER 16 inlying 1810-B ER 20 inlying 1810-B ER 25 inlying 1810-B ER 25 outlying 1810-A ER 32 inlying 1810-B ER 32 outlying 1810-B ER 40 inlying 1810-B ER 40 outlying 1810-A Sawlade holder 1810-A Milling aror B 33

34 Accessories ER Seal isc Size Tightness range () Size Tightness range () ,0-2, ,0-3, ,0-4, ,0-5,5 ER ,0-6, ,0-7, ,0-8, ,0-9, ,0-2, ,0-3, ,0-4, ,0-5, ,0-6,5 ER ,0-7, ,0-8, ,0-9, ,0-10, ,0-11, ,0-2, ,0-3, ,0-4, ,0-5, ,0-6, ,0-7, ,0-8,5 ER ,0-9, ,0-10, ,0-11, ,0-12, ,0-13, ,0-14, ,0-15, ,0-2, ,0-3, ,0-4, ,0-5, ,0-6, ,0-7, ,0-8, ,0-9, ,0-10,5 ER ,0-11, ,0-12, ,0-13, ,0-14, ,0-15, ,0-16, ,0-17, ,0-18, ,0-19, ,0-2, ,0-3, ,0-4, ,0-5, ,0-6, ,0-7, ,0-8, ,0-9, ,0-10, ,0-11, ,0-12, ,0-13,5 ER ,0-14, ,0-15, ,0-16, ,0-17, ,0-18, ,0-19, ,0-20, ,0-21, ,0-22, ,0-23, ,0-24, ,0-25,5 Set of Seal isc Size Piece Tightness range () Grading ER ,0-10 0, ER ,0-13 0, ER ,0-16 0, ER ,0-20 0, ER ,5-26 0,5 34

35 Accessories for Toolholder VI 3425 Reducing Sleeve, Slotted Reducing Sleeve Pict. 1 Pict. 2 d2 d4 l1 l2 Pict. d2 d3 d4 l1 l

36 Circular- and Thread Milling Tools n Reamers with Polygonal Interface n riven Toolholders for CNC Machining Centers n riven Toolholders for CNC Turning Machines n Multi-Spindle Technology n Modular Quick Change Toolholders mimatic mi n Static Toolholders for CNC Turning Machines n Precision Chucks n Special Cutting Tools n mimatic Home of Innovations mimatic GmH Westendstraße Betzigau Phone +49 (0) 831 / Fax +49 (0) 831 / info@mimatic.de