Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12

Size: px
Start display at page:

Download "Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12"

Transcription

1 Alberti LIVE TOOLS ATTACCO DIN 5480 W16x0.8x30x18/9b Thompson Rd East Windsor CT Fax

2 Alberti ALBERTI LIVE TOOLS Alberti Lathe Tooling Turn your Nakamura Lathe into an ultimate performance profit center with lathe tooling from Alberti and KOMA Precision. With over 12,000 live tools and angle heads installed, KOMA is the world s largest supplier for Alberti - the originator and foremost innovator of productivity tooling. Alberti lathe tools are covered by a one year warranty and backed by a KOMA service department with experience and expertise second to none. All Alberti tooling service and maintenance is performed in Connecticut. A comprehensive spare parts inventory ensures quick service turnaround. 1

3 ALBERTI LIVE TOOLS Alberti AXIAL DUAL OUTPUT AXIAL TRIPLE OUTPUT RADIAL DUAL OUTPUT WT-100 WY-100 SUPER NTY 3 NTJ-100 Extended Length 2:1 Speeder Extented Length MA-1.5 2U MA-1.5 3U M U GH GH GH Output ER-16A ER-16A ER-16A Nm/ft.lbs. 15.6/ / /11.5 RPM 6,000 6,000 6,000 MA-2.5 2U H75 MA-2.5 3U H75 M F 2U H75 GH GH GH Output ER-16A ER-16A ER-16A Nm/ft.lbs. 15.6/ / /11.5 RPM 6,000 6,000 6,000 M FS 2U H75 GH Output ER-16A Nm/ft.lbs. 15.6/11.5 RPM 6,000 6,000 RPM Maximum ER-16A = mm 3/4 FACE & O.D. CUTTING HOLDERS WT-100 WY-100 SUPER NTY 3 NTJ-100 A21411 A21421 A21490 A21478 A21417 A8425 KH KH KH KH KH KH /4 CUT OFF HOLDER 1 CUT OFF HOLDER 3/4 CUT OFF HOLDER 1 COOLANT HOLDER 1 DOUBLE BAR HOLDER 3/4 TRIPLE BAR HOLDER WT-100 WY-100 SUPER NTY 3 NTJ-100 Coolant Thru A21431 A22074 A21441 A22412 A21491 KH KH KH KH KH A22417 KH

4 Alberti ALBERTI LIVE TOOLS CROSS DRILL TOOLS OFFSET CROSS DRILL TOOLS FACE DRILL TOOLS DUAL OUTPUT FACE TOOLS ADJUSTABLE ANGLE TOOLS WT-100 WY-100 SUPER NTY 3 NTJ-100 Extended Length Coolant Thru Coolant Thru Extented Length 2:1 Speeder 2:1 Speeder Extented Length A26330 A26333 A U-WT100 AUAT 0.5 GH GH GH GH Output ER-25A ER-25A ER-25A ER-11 Nm/ft.lbs / / /7 RPM 6,000 6,000 6,000 6,000 A26333 H75 A U H75 GH GH Output ER-25A ER-25A Nm/ft.lbs. 25.1/ /18.5 RPM 6,000 6,000 A26330C A26333C GH GH Output ER-25A ER-25A Nm/ft.lbs /18.5 RPM 6,000 6,000 A26333C H75 GH Output ER-25A Nm/ft.lbs. 25.1/18.5 RPM 6,000 A26330S A26333S GH GH Output ER-16A ER-16A Nm/ft.lbs. 15.6/ /11.5 RPM 12,000 12,000 A26333S H75 GH Output ER-16A Nm/ft.lbs. 15.6/11.5 RPM 12,000 Coolant Pressure = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 3

5 ALBERTI LIVE TOOLS Alberti CROSS DRILL TOOLS FACE OFFSET FACE DRILL TOOLS DRILL TOOLS DUAL OUTPUT FACE TOOLS ADJUSTABLE ANGLE TOOLS AS-200 NTY TW-10 SC-150 SC-200 SC-250 WT-150 WT-150LB WT-250 WTS-150 WTW-150 SUPER NTJ SUPER NTJX NTM 3 WY-250L Coolant Thru 2:1 Speeder Coolant Thru 2:1 Speeder 4:1 Speeder KZ-1510 KZ-1513 KZ-1513 D KZ U MCU1.5-TW10 GH GH GH GH GH Output ER-25 ER-25 ER-25 ER-25 ER-16 Nm/ft.lbs / / / /4.5 RPM 6,000 6,000 6,000 6,000 6,000 KZ-1510-ER32 KZ-1513-ER32 KZ-1513 D GH GH GH Output ER-32 ER-32 ER-32 Nm/ft.lbs. - 45/ /22 RPM 6,000 6,000 6,000 KZ-1510C KZ-1513C KZ-1513 DC GH GH GH Output ER-25 ER-25 ER-25 Nm/ft.lbs / /18.5 RPM 6,000 6,000 6,000 KZ-1510C-ER32 KZ-1513C-ER32 KZ-1513 DC GH GH GH Output ER-32 ER-32 ER-32 Nm/ft.lbs. - 45/ /22 RPM 6,000 6,000 6,000 KZ-1510S-2:1 KZ-1513 DS GH GH Output ER-20A ER-20A Nm/ft.lbs. 15.6/ /11.5 RPM 12,000 12,000 KZ-1513 DCS GH Output ER-20 Nm/ft.lbs. 15.6/11.5 RPM 12,000 MCU1.5-TW10S GH Output ER-16 Nm/ft.lbs. 4/3 RPM 12,000 Coolant Pressure = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 4

6 Alberti ALBERTI LIVE TOOLS CROSS DRILL TOOLS FACE OFFSET FACE DRILL TOOLS DRILL TOOLS DUAL OUTPUT FACE TOOLS ADJUSTABLE ANGLE TOOLS TW-20 SC-300 WT-300 SUPER NTX SUPER NTXS Coolant Thru 2:1 Speeder Coolant Thru 2:1 Speeder 4:1 Speeder KR-2310 KR-2313 KR-2313 D KR U MCU1.5-TW20 GH GH GH GH GH Output ER-32 ER-32 ER-32 ER-25 ER-16 Nm/ft.lbs. - 45/ / / /4.5 RPM 6,000 6,000 6,000 6,000 6,000 KR-2310 C KR-2313 C KR-2313 DC GH GH GH Output ER-32 ER-32 ER-32 Nm/ft.lbs. - 45/ /33.2 RPM 6,000 6,000 6,000 KR-2310 S KR-2313 DS GH GH Output ER-25A ER-25 Nm/ft.lbs. 30.1/ /18.5 RPM 12,000 12,000 KR-2313 DCS GH Output ER-25 Nm/ft.lbs. 25.1/18.5 RPM 12,000 MCU1.5-TW20S GH Output ER-16 Nm/ft.lbs. 4/3 RPM 12,000 Coolant Pressure = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 5

7 ALBERTI LIVE TOOLS Alberti CROSS FACE DRILL TOOLS DRILL TOOLS ANGLE ADJUSTABLE TOOLS TW-30 SC-450 STW-40 STS-40 Coolant Thru KR-3510 KR-3513 MCU2.5-TW30 GH GH GH Output ER-40 ER-40 ER-25 Nm/ft.lbs / /15 RPM 6,000 6,000 6,000 KR-3510 C KR-3513 C GH GH Output ER-40 ER-40 Nm/ft.lbs /55.3 RPM 6,000 6,000 Coolant Pressure = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm CROSS DRILL TOOLS FACE DRILL TOOLS DUAL OUTPUT FACE TOOLS ADJUSTABLE ANGLE TOOLS SUPER MILL Coolant Thru KG-4310 KG-4313 KG U MCU-1.5 GH GH GH GH Output ER-32 ER-32 ER-32 ER-16 Nm/ft.lbs. - 45/ / /4.5 RPM 6,000 6,000 6,000 6,000 KG-4313 GH Output ER-32 / H=75 Nm/ft.lbs. 45/33.2 RPM 6,000 KG-4310 C KG-4313 C GH GH Output ER-32 ER-32 Nm/ft.lbs. - 45/33.2 RPM 6,000 6,000 Coolant Pressure = 70 Bar/1050 PSI RPM = Maximum ER-11 = 0.5-7mm ER-16/ER-16A = mm ER-20/ER-20A = mm ER-25/ER-25A = mm ER-32 = 1-20mm ER-40 = 2-30mm 6

8 20 Thompson Rd East Windsor CT Fax ROTARY TABLES ANGLE HEADS LIVE TOOLS SWISS TOOLS TOOL PRESETTERS Alberti-Nakamura Live /26/13

9 Alberti 77 System TOOLS ATTACCO DIN 5480 W16x0.8x30x18/9b Thompson Rd East Windsor CT Fax

10 Alberti S MARTC HANGE System New from Alberti, a complete range of live tools with interchangeable adapters for Nakamura-Tome are now available in stock. The System units have a standard profile with no additional projection to reduce the chance of interference with the machine s enclosures. Alberti s patent pending design creates three points of contact between the driven tool holder body and tool holder output surfaces so there is no compromise in concentricity and rigidity to gain the speed and convenience of quick-change tooling. With the System one set of live tools can always stay in the machine with only the adapters needing to be changed. This provides improved efficiency and flexibility, plus a reduction in overall tooling costs. Alberti 1

11 S MARTC HANGE TOOLS Alberti The Alberti A quick change system like no other... QUICK EASY PRECISE CROSS FACE DRILL TOOLS DRILL TOOLS System CROSS FACE DRILL TOOLS DRILL TOOLS WT-100 NTY 3 SUPER NTY 3 NTJ-100 WY-100 Coolant Thru Extended Length C26330-SC C26333-SC GH GH Output SC* SC* Nm/ft.lbs /18.5 RPM 6,000 6,000 C26330C-SC C26333C-SC GH GH Output SC* SC* Nm/ft.lbs /18.5 RPM 6,000 6,000 A26333-SC GH Output SC* Nm/ft.lbs. 25.1/18.5 RPM 6,000 Coolant Pressure = 70 Bar/1050 PSI RPM = Maximum AS-200 NTY TW-10 SC-150 SC-200 SC-250 WT-150 WT-150LB WT-250 WTS-150 WTW-150 SUPER NTJ SUPER NTJX NTM 3 WY-250L Coolant Thru KZ-1510 KZ-1513 GH GH Output SC2* SC2* Nm/ft.lbs /18.5 RPM 6,000 6,000 KZ-1510 C KZ-1513 C GH GH Output SC2* SC2* Nm/ft.lbs /18.5 RPM 6,000 6,000 Coolant Pressure = 70 Bar/1050 PSI RPM = Maximum *Each tool comes standard with an ER Adapter, a Main Spindle Anti-Rotation Wrench & a Long Handle Wrench for Lock / Unlock Nut. For additional adapters & accessories, see below. Additional Adapters Accessories Measuring Fixtures ER Collets ER Collets SIZE LIST PRICE ER-20 $520 ER-25 $520 Tool Pot SIZE LIST PRICE 40 Taper $ Taper $950 Weldon Outputs Weldon Outputs SIZE LIST PRICE 1/2 $400 5/8 $400 Tool Pot Holding Fixture LIST PRICE $750 Shell Mill Arbors Shell Mill Arbors SIZE LIST PRICE 3/4 $475 Holding Fixture Note: Holding fixture does not include adapter and wrench. 2

12 Alberti S MARTC HANGE The Alberti A quick change system like no other... QUICK EASY PRECISE System Triple Contact System First & Second Contact Points Third Contact Point Low Profile This system incorporates a triple contact support between the body and adapter for extreme rigidity and accuracy. How It Works Clamping Un-Clamping The patent pending Alberti collet clamp & wrench system quickly and precisely locks the quick change adapter, reducing tool cutter changing time to a minimum. The System allows for tools to be externally preset for quick job change over and increased profitability. 3

13 S MARTC HANGE Alberti Highest Accuracy & Repeatability Run-Out of the Collet Chuck with Adapter Mounted Repeatability Adapter Change Time µm 20 seconds Accuracy with Gauge Bar Inserted in the Collet Chuck Repeatability 0.003mm ( in.) Run Out with System 120mm (4.72in.) 40mm (1.57in.) Max ( in.) Max ( in.) Accuracy with Gauge Bar Inserted in the Collet Chuck at 40mm = 0.008mm (1.57in. = in.) at 120mm = 0.01mm (4.72in. = in.) Large Selection of Adapters ER Collet Chuck Weldon Output Shell Mill Output 4

14 Alberti TOOL PRESETTER Reinforced Construction - Natural Granite Base & Column for Increased Thermal Stability - Stainless Steel Mechanical Elements for Higher Resistance & Longer Life Spindle Interchangeability - Fully Interchangeable to Handle a Multitude of Different Tool Shank Types (Optional) Axis Movements - Fast & Precise Adjustments for Immediate Visualization of Tool Profiles - Simple, Easy-to-Use, Maintenance Free Design Electronic Features - Newly Upgraded Camera System with TFT Color LCD 5.7 Backlit Matrix Display for Improved User Interface - C-MOS Sensor with mm Resolution DDP System Software - Easy to Use, Intuitive Software SPECIFICATIONS LARTH CONSTRUCTION Bench Model Natural Granite Base & Column Stainless Steel Mechanical Elements Dimensions 512mm L x 406mm D x 827mm H Weight 45 Kg / 99 lbs AXIS MOVEMENT X Axis (Radial) = 130mm / 5.188in Z Axis = 360mm / 14.17in Resolution X & Z Axis - 1 µm Manual Rapid & Fine Adjustment Movement (Zero Backlash) SPINDLE Fixed or Interchangeable Rotating Spindles ISO / HSK / CAPTO / VDI / Interchangeable Rotating Spindles Available ISO 40, 50 Fixed Rotating Spindle Holder & Adapters Available Manual Mechanical Brake Concentricity - 4 µm Maximum Tool Weight 30kg / 66 lbs. OPERATING SYSTEM 5.7 Color LCD Touchscreen Display / Operator Interface / 640 x 480 Resolution RISC 32 Bit Processor Data Storage on Flash Connectivity - USB / RS-232 Printer Support (optional) Capable of Storing 9 Different Machine Specifications Capable of Storing 81 Different Tool Specifications CAPABILITIES Measure - Full Screen Auto Targeting Measure - X&Z Axis Focusing Control Bar Measure - Automatic Radius & Angle Computing Cycle Measure - Radius/Diameter, MM/Inches, Absolute/Incremental Modes VISION SYSTEM Telecentric Lens / C-MOS Image Sensor with 0.001mm resolution / 20x Magnification DPP SOFTWARE (Optional) Tool List Management / Tool Sets & Post Processor Universal Generator CNC Machine Origin Management 5

15 TOOL PRESETTER Alberti Outside Presetting Speeds Up Tool Change & Replacement Times Eliminate Tool Offset Input Errors Minimize Spindle Down Time Increase Productvity Cutting Tool Adapter Tool Pot Adapters Tool Presetter Holding Fixture 6

16 20 Thompson Rd East Windsor CT Fax ROTARY TABLES ANGLE HEADS LIVE TOOLS SWISS TOOLS TOOL PRESETTERS Alberti-Nakamura Live /26/13

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 LIVE 77 Includes Tools 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Lathe Tooling

More information

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12

Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 LIVE 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com STRAIGHT 90 DUAL OUTPUT

More information

Alberti LIVE TOOLS DOOSAN MACHINE TOOLS AMERICA

Alberti LIVE TOOLS DOOSAN MACHINE TOOLS AMERICA 55 21.65 1 47 c te ca Me 40 77 LIVE DOOSAN 12 80 54 N 9b DI 8/ O 0x1 CC x3 TA 0.8 AT 6x 16 W1 67 55 18 4 11 7 MACHINE AMERICA 20 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com

More information

INDUSTRIAL DISTRIBUTOR CATALOG

INDUSTRIAL DISTRIBUTOR CATALOG INDUSTRIAL DISTRIBUTOR CATALOG 20 Thompson Road, East Windsor, CT 06088 1-800-249-5662 860-623-4132 Fax www.komaprecision.com info@komaprecision.com 1 2 TABLE OF CONTENTS KOMA Corporate Information...

More information

Alberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30

Alberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30 350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &

More information

NAKAMURA TOME LIVE TOOLING

NAKAMURA TOME LIVE TOOLING NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000

More information

Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12

Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12 1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested

More information

Technical Features. 20 Thompson Rd East Windsor CT Fax

Technical Features. 20 Thompson Rd East Windsor CT Fax Technical Features 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com THE TSUDAKOMA DUAL LEAD GEARING SYSTEM THE TSUDAKOMA DUAL LEAD GEARING

More information

Driven Toolholders for MAZAK Machines

Driven Toolholders for MAZAK Machines Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /

More information

ROTARY TABLE SELECTION GUIDE

ROTARY TABLE SELECTION GUIDE ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East Windsor,

More information

July 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

July 2018 ONLY FOR LT2000 M/MY.  A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory

More information

BMT 65 TOOLING BENZTOOLING.COM

BMT 65 TOOLING BENZTOOLING.COM BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s

More information

ROTARY TABLE SELECTION GUIDE

ROTARY TABLE SELECTION GUIDE ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABLE SELECTION GUIDE KOMA PRECISION, Inc. corporate

More information

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:

PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P: PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters

More information

July 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

July 2018 ONLY FOR LT3000 M/MY.   A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory

More information

April 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

April 2017 TOOLING FOR LT3000 M/MY.  A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe

More information

BEST OF 2014 January December

BEST OF 2014 January December Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

Automatic Tool Presetter System Belt-Type Chip Conveyor Spindle Orientation Parts Catcher

Automatic Tool Presetter System Belt-Type Chip Conveyor Spindle Orientation Parts Catcher Haas ST-10 GR Series CNC Lathe Gantry The High-Performance Router SystemsTurning Center [ S p e c i a l S e r i e s ] 12-station bolt-on style turret Belt-type chip conveyor available 6000-rpm high-speed

More information

July 2018 ONLY FOR LU3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

July 2018 ONLY FOR LU3000 M/MY.   A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty ONLY FOR OKUMA July 2018 LU3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest

More information

EVOLUTION LINE ANGLE HEADS

EVOLUTION LINE ANGLE HEADS EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center

More information

Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW

Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form

More information

ROTARY TABLE SELECTION GUIDE

ROTARY TABLE SELECTION GUIDE ROTARY TABE SEECTION GUIDE 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East indsor,

More information

April 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

April 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty TOOLING FOR April 2017 MULTUS U3000/U4000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory

More information

ROTARY TABLE SELECTION GUIDE

ROTARY TABLE SELECTION GUIDE ROTARY TABLE SELECTION GUIDE Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com HWACHEON ROTARY TABLE SELECTION GUIDE RNE-0R RNA-161R RG-R RN-100R-2

More information

July 2017 TOOLING FOR GENOS L300/L3000 BMT. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

July 2017 TOOLING FOR GENOS L300/L3000 BMT.  A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty TOOLING FOR July 2017 GENOS L300/L3000 BMT www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest

More information

BARON-MAX VB Series Vertical Machining Centers

BARON-MAX VB Series Vertical Machining Centers BARON-MAX VB Series Vertical Machining Centers Heavy Duty Performance The Baron Max VB series offers versatility and value. Ideal for production and job shop applications, the rugged construction allow

More information

TW Series: TW-10, TW-20 DRIVEN AND STATIC TOOLING CATALOG

TW Series: TW-10, TW-20 DRIVEN AND STATIC TOOLING CATALOG Nakamura-Tome TW Series: TW-10, TW-20 DRIVEN AND STATIC TOOLING CATALOG 1019 BERGIN RD. HOWELL, MI 4884 PHONE : 877 91 TOOLS ( 810 62 4446 ) FAX: 877 92 TOOLS ( 810 62 4467 ) EMAIL: info@mdtooling.com

More information

FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4

FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4 FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp

More information

BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing

BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range

More information

Tooling for Swiss Automatics

Tooling for Swiss Automatics Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical

More information

Clamping Tools

Clamping Tools Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves

More information

October 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

October 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW.  A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty TOOLING FOR October 2017 LB2000/LB3000 M/MY/MYW www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory

More information

BARON-MAX VL Range Vertical Machining Centers

BARON-MAX VL Range Vertical Machining Centers BARON-MAX VL Range Vertical Machining Centers Linear Guide ways VL Range Higher Efficiency, Rigid Structure, Excellent and Stable Accuracy At a Very Affordable Pricing Cost Effective, High Performance

More information

BMT LIVE & STATIC TOOLING

BMT LIVE & STATIC TOOLING BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835

More information

BEST OF 2015 January December

BEST OF 2015 January December BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

More information

August 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

August 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty ONLY FOR OKUMA August 2018 MULTUS U3000/U4000/U5000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the

More information

HIGH EFFICIENCY VERTICAL MACHINING CENTER

HIGH EFFICIENCY VERTICAL MACHINING CENTER HIGH EFFICIENCY VERTICAL MACHINING CENTER 1 HIGH EFFICIENCY VERTICAL MACHINING CENTER FACE MILL S45C Steel Material Removal Rate 138cc/min. EV1020A is built with state-of-the-art technology in mind and

More information

We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»

We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» » Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting

More information

ER Collets Nuts Disks

ER Collets Nuts Disks Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50

More information

Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)

Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420) HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16

More information

Typhoon L Series CNC Turning Centres

Typhoon L Series CNC Turning Centres Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal

More information

turning centers Haas Automation Inc. TURNING CENTERS

turning centers Haas Automation Inc. TURNING CENTERS All New turning centers The New Generation Haas turning centers are the culmination of 15 years of continuous development, and they offer the most performance for the money the best value of any turning

More information

ANGLE HEADS & SPINDLE SPEEDERS

ANGLE HEADS & SPINDLE SPEEDERS & SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119

More information

BEST OF A selection of our most popular products. To view the complete range visit

BEST OF A selection of our most popular products. To view the complete range visit BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it

More information

CNC Tool Room Milling Center MODEL: VM-760

CNC Tool Room Milling Center MODEL: VM-760 CNC Tool Room Milling Center MODEL: VM-760 MACHINE FEATURES 7.5HP high torque spindle motor, low noise and vibration BT40/CAT40/DIN40 6000 rpm spindle speed, ( Optional 8,000, 10,00, 12,000 or 15,000rpm

More information

SHRINK FIT CHUCKS CAT BT HSK CAPTO.

SHRINK FIT CHUCKS CAT BT HSK CAPTO. SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink

More information

Auction Catalog. Auction Date:

Auction Catalog. Auction Date: Auction Catalog Satowfi Machining Solutions LLC. Auction Date: Thursday, July 26, 2018 Lots Start Closing: 10:00 AM MST KD Auctions 7918 E.McClain Dr. Suite 101 Scottsdale, AZ 85260 Phone: (480) 455-3910

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your

More information

Centers. power and. accuracy. 12/16 KW 24 tools Double arm. High quality surface finishing. to 12,000 rpm. tools ATC Magazine

Centers. power and. accuracy. 12/16 KW 24 tools Double arm. High quality surface finishing. to 12,000 rpm. tools ATC Magazine BARON-MA AX VL Range Vertical Machining Centers Linear Guide ways VL Rangee Powerful Machines, Simple User Friendly Programming Att a Very Affordable Pricing Cost Effective, High Performance Vertical Machining

More information

SG9MTS Cylinder Head Seat & Guide Machine

SG9MTS Cylinder Head Seat & Guide Machine SG9MTS Cylinder Head Seat & Guide Machine The Speed of Live and the Accuracy of Fixed Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. SG9MTSMTS CYLINDER

More information

KAFO B / BMC SERIES SPECIFICATION

KAFO B / BMC SERIES SPECIFICATION B-2015 BMC-2015 B-3015 BMC-3015 B-2616 BMC-2616 B-3116 BMC-3116 B-4116 BMC-4116 X-axis (left and right) 2100 3100 2600 3100 4100 Y-axis (back and forth) 1500 1600 Z-axis (up and down) 800 900 (*1100) Distance

More information

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit

More information

CNC Double Column Machining Center. SDV-H Series SDV Series.

CNC Double Column Machining Center. SDV-H Series SDV Series. CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear

More information

SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )

SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent ) SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the

More information

ROTARY TABLE SELECTION GUIDE

ROTARY TABLE SELECTION GUIDE ROTARY TABE SEECTION GUIDE 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABES RNE SERIES RA SERIES RBS SERIES RN-MUTI SERIES RBA

More information

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

More information

BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret.

BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret. BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret www.benztooling.com March 2015 Table of Contents Live Tools ST 10 (Y) ST 20 (Y) ST25 (Y) ST 30 (Y) ST 35 (Y) DS 30 (Y) ST 20 SS (Y) ST 30 SS (Y) DS

More information

VTC VERTICAL TURNING CENTRES

VTC VERTICAL TURNING CENTRES VTC VERTICAL TURNING CENTRES VTC VERTICAL TURNING CENTRES VERTICAL TURNING CENTRES precision VTC VERTICAL TURNING CENTRES DANOBATGROUP is one of the largest machine tools and production systems manufacturers

More information

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are

More information

HSK-T TOOLING SYSTEMS for TURNING MILL. World standard ISO. for Turning Mill SET SCREW HOLDERS FOR ROUND SHANK INSERT HOLDERS FOR SQUARE-SHANK

HSK-T TOOLING SYSTEMS for TURNING MILL. World standard ISO. for Turning Mill SET SCREW HOLDERS FOR ROUND SHANK INSERT HOLDERS FOR SQUARE-SHANK HSK-T TOOING SYSTES for TURNING I SET SCREW HODERS FOR ROUND SHANK For through-spindle coolant CC type For nozzle-coolant CN type P. 71 World standard ISO for Turning ill INSERT HODERS FOR SUARE-SHANK

More information

Swiss Automatic Tooling

Swiss Automatic Tooling Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets

More information

CNC swiss and non-swiss. turning center TNL32

CNC swiss and non-swiss. turning center TNL32 CNC swiss and non-swiss turning center TNL32 Thanks to the outstanding technical features of the TRAUB TNL32 CNC swiss and non-swiss turning center, you will notice measurable improvements in production.

More information

DOOSAN MACHINE TOOLS AMERICA

DOOSAN MACHINE TOOLS AMERICA ROTARY TABE SEECTION GUIDE DOOSAN MACHINE TOOS AMERICA KOMAPRECISION.COM 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABE MODES

More information

DOOSAN LIVE & STATIC TOOLING

DOOSAN LIVE & STATIC TOOLING DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800

More information

Typhoon B Series CNC Turning Centres

Typhoon B Series CNC Turning Centres Typhoon B Series CNC Turning Centres www.colchester.co.uk Typhoon B Series CNC Turning Centres The Typhoon B Series constructed from a one piece cast, base incorporates FEM analysis to achieve an optimal

More information

GMS SERIES Tool Spindle Type 5-axis Turning Centers

GMS SERIES Tool Spindle Type 5-axis Turning Centers GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide

More information

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of

More information

Various duties efficiently solved EMCOMAT E-300 E-360 E-400. [ means:

Various duties efficiently solved EMCOMAT E-300 E-360 E-400. [ means: [ E[M]CONOMY] means: Various duties efficiently solved EMCOMAT E-300 E-360 E-400 Cycle-controlled lathes with high-powered cutting performance and maximum precision EMCOMAT E-300 [Headstock] - Siemens

More information

CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG

CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders

More information

DOOSAN MACHINE TOOLS AMERICA

DOOSAN MACHINE TOOLS AMERICA ROTARY TABE SEECTION GUIDE DOOSAN MACHINE TOOS AMERICA Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABE MODES RNE SERIES RA SERIES

More information

Features Benefits. Toolholders. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and part number.

Features Benefits. Toolholders. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and part number. Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 00/ISO 400. Marking Type and part number. Traceability Lot number marking on all products for traceability through the

More information

HIGH PRECISION HIGH PERFORMANCE

HIGH PRECISION HIGH PERFORMANCE Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility

More information

powrgrip for mold & die Trustworthy toolholding solutions

powrgrip for mold & die Trustworthy toolholding solutions powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and

More information

DRIVEN and STATIC TOOLING For MURATEC

DRIVEN and STATIC TOOLING For MURATEC 10139 BERGIN RD. HOWELL, MI 48843 PHONE : 8-91-TOOLS ( 810-63-4446 ) FAX: 8-9-TOOLS ( 810-63-446 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com DRIVEN and STATIC TOOLING For MURATEC Live Tooling

More information

HPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System

HPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of

More information

GTO Precise, universal stationary chuck for collets

GTO Precise, universal stationary chuck for collets Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest

More information

ROTARY TABLE SELECTION GUIDE

ROTARY TABLE SELECTION GUIDE ROTARY TABE SEECTION GUIDE 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com ROTARY TABES RNE SERIES RBA SERIES TA SERIES 1 RA SERIES RTV SERIES

More information

ROTARY TABLE SELECTION GUIDE

ROTARY TABLE SELECTION GUIDE ROTARY TABE SEECTION GUIDE 20 Thompson Rd East indsor CT 06088 1.800.249.5662 860.623.4132 ax www.komaprecision.com info@komaprecision.com SAMSUNG MCV 50 RNA-161R RNA-201R RNA-251R RNE-160R RNE-200R RNE-250R

More information

COMPANY INTRODUCTION

COMPANY INTRODUCTION COMPANY INTRODUCTION Uncompromising Quality Utilizing State-of-the-Art Facilities and Equipment DMG-MORI Multitasking CNC Machines The work piece is completed in a single set-up. Assures the best qualities

More information

MULTITURRET BAR TURNING B436Y2

MULTITURRET BAR TURNING B436Y2 MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model

More information

Designed for Automatic Tool Change Machines

Designed for Automatic Tool Change Machines TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and

More information

That s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance

That s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance [ That s ] E[M]CONOMY: NEW Not just training: Real action! CONCEPT TURN 260 CNC training with industrial performance Concept TURN 260 As a systematic advancement of the CT250, the CT260 convinces by its

More information

Wherever you are there is a qualified service engineer available to meet your service needs.

Wherever you are there is a qualified service engineer available to meet your service needs. Amera-Seiki service is begins with its nationwide chain of dealers, factory trained and well educated in its machine tools. As well, Amera Seiki fields a full complement of factory direct engineers covering

More information

NXV1020A. High Performance Vertical Machining Center

NXV1020A. High Performance Vertical Machining Center STANDARD FEATURES POWERFUL 25 HP IDD SPINDLE BBT TYPE HIGH SPEED 24 TOOL SWING-ARM ATC SYSTEM MXP 200FA WITH MANUAL GUIDE I 60 DEGREE CHIP AUGER 12,000 RPM MAXIMUM SPINDLE SPEED 40mm THK NR TYPE LINEAR

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281

More information

Driven Toolholders for HAAS Machines

Driven Toolholders for HAAS Machines riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool

More information

OUR TECHNOLOGY PROVES TO BE A CUT ABOVE THE REST. Metal Cutting Solutions

OUR TECHNOLOGY PROVES TO BE A CUT ABOVE THE REST. Metal Cutting Solutions OUR TECHNOLOGY PROVES TO BE A CUT ABOVE THE REST. Metal Cutting Solutions With years of experience of working closely with our customers on various manufacturing processes, Nickunj today is capable of

More information

Technical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points

Technical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134

More information

Techleader Clearance Items Qty. Order No. Description Price

Techleader Clearance Items Qty. Order No. Description Price Techleader Clearance Items Qty. Order No. Description Price Collets 16C 4 160-056-SE 16C 7/8" Round Serrated Collet $40.95ea 2 160-004 16C 1/16" Round Smooth Collet $34.50ea KATO TC TAP COLLETS 1 810-101

More information

DRIVEN and STATIC TOOLING For EMAG

DRIVEN and STATIC TOOLING For EMAG 1019 BERGIN RD. HOWELL, MI 4884 PHONE : 877-91-TOOLS ( 810-6-4446 ) FAX: 877-9-TOOLS ( 810-6-4467 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com DRIVEN and STATIC TOOLING For EMAG Live Tooling

More information

Thickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical

Thickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130

More information

Standard Programme Clamping Technology. The tool specialists for the trade.

Standard Programme Clamping Technology. The tool specialists for the trade. Standard Programme Clamping Technology The tool specialists for the trade. Direction Leipzig 4 Direction Dresden Direction Erfurt Chemnitz 72 95 The tool specialists for the trade. WTE Präzisionstechnik

More information

We set the standard for the highest precision and most advanced technology in the machine tool accessory market

We set the standard for the highest precision and most advanced technology in the machine tool accessory market ANGLE HEADS heimatec GmbH-Renchen, Germany Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility, on 7.5 acres, is home to over 100

More information

Various duties efficiently solved EMCOMAT E-360 E-400. Cycle-controlled lathes with high-powered cutting performance and maximum precision.

Various duties efficiently solved EMCOMAT E-360 E-400. Cycle-controlled lathes with high-powered cutting performance and maximum precision. Various duties efficiently solved EMCOMAT E360 E400 Cyclecontrolled lathes with highpowered cutting performance and maximum precision Turning emco world.co m EMCOMAT E360, E400 You will find the right

More information

enduring. Drill Chucks NC-Tooling 2013/2014

enduring. Drill Chucks NC-Tooling 2013/2014 enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type

More information

Stub Mill Holders, Boring Head, Blank Bar

Stub Mill Holders, Boring Head, Blank Bar Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,

More information

Extraordinary Value & Performance Since 1986, Techno, has provided economical CNC cutting solutions. The new HDS Series promises to follow suit.

Extraordinary Value & Performance Since 1986, Techno, has provided economical CNC cutting solutions. The new HDS Series promises to follow suit. The HDS CNC Router is manufactured using global state-of-the-art techniques with advanced engineering and workmanship and built to last with all steel construction and superior components such as precision

More information

ANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life

ANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and

More information