Steel / Cast iron body Independent chucks
|
|
- Leonard Knight
- 5 years ago
- Views:
Transcription
1 Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design with individually adjustable jaws are successfully established, where irregular, regular or round workpieces have to be clamped safely. Independent chucks Mechanism By turning the radial positioned pinion (2, hardened) the power will be transmitted to the clamping jaws (5, 6, hardened) directly. The operating screw will be kept in position by the bearing support (3, 4, hardened). Steel or cast iron body (1) Lubrication Independent chucks must be lubricated regularly to maintain their grippng force. Appropriate directions are included in the operating instructions supplied with each chuck Steel / cast iron body 2 Operating screw 3 Bearing support inside 4 Bearing support external 5 Base jaw 6 Reversible top jaw
2 USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually adjustable through threaded adjusting spindle - steel version, from size 400 with T-slots and bolt slots Delivery includes: 1 set of hard solid, 1 wrench, mounting screws or 1 set of hard master jaws, 1 set of hard top jaws, 1 wrench, mounting screws cylindrical centre mount (without mounting bolts) Size Through-hole with one-piece with reversible top jaws Speed max. min -1 Torque Nm Clamping force/jaw kn Steel independent chucks USE-USU ISO (DIN 55027), DIN 55022; with studs and locknuts, optional DIN with set screw and nut Size Mount short taper Through-hole with one-piece with reversible top jaws Speed max. Torque Nm Clamping force/jaw kn min
3 USE-USU Steel independent chucks USE-USU ISO (DIN 55026); DIN 55021, ASA B 5.9, A1/A2 metr.; mounting from front (without mounting bolts) Size Mount short taper Through-hole with one-piece with reversible top jaws Speed max. min -1 Torque Nm Clamping force/ jaw kn ) ) ) ) not for DIN or A1/A2 inch 2) not for A1/A2 inch ISO (DIN 55029); ASA B 5.9, Type D, with studs for Camlock 3060 Size Mount short taper Through-hole with one-piece with reversible top jaws Speed max. min -1 Torque Nm Clamping force/ jaw kn
4 Jaws USE-USU Type 493 Reversible jaw EB hardened / / Type 497 Base jaw GB with fixing screw , , / , ,4 47, , , , ,2 70 Jaws USE-USU Type 403 Reversible top jaws UB DIN 6350 hardened ,3 52, ,5 57, / , /630/ , / /1100/ Stepped and hardened jaws, supplied as supplement or as spares, must be ground on the chuck. In case of a subsequent jaw delivery please return the chuck. Type 402 Unstepped top jaw AB DIN 6350 soft, material 16MnCr , , / , /630/ , / /1100/
5 Accessories USE-USU Type 493 Adjusting spindle Item no. Size Square Hexagon Accessories USE- USU Type 493 Safety key Item no. Size Square Hexagon / / / /900/1000/
6 Technical data - Independent chucks Chuck dimensions steel body Cylindrical centre mount Short taper mount DIN with setscrews and locknuts DIN with studs and nuts Size A B H C D USE-USU ,5 112,5 112,5 122,5 132, E USE-USU F G 4x13,5 4x13,5 4x17 4x17 4x17 4x20,5 4x20,5 8x22 8x22 8x22 8x22 8x26 H J ,5 55, K L M N SW ) approx. kg ) Outer hexagon Size A Taper size 4 1) 5 2) B 63,5 82,5 106,4 82,5 106,4 139,7 106,4 139,7 196,9 106,4 139,7 196,9 106,4 139,7 196,9 139,7 196,9 285,8 D ,5 112,5 112,5 122,5 E F DIN 85 Camlock 82,6 104,8 133,4 104,8 133,4 171,4 133,4 171, ,4 171, ,4 171, , ,2 G H J ,5 K USE USU L 95,3 109, M 56,5 60, N ,4 165 SW approx. kg Dimensions steel independent chucks DIN with studs for camlock Size A Taper size B 139,7 196,9 285,8 139,7 196,9 285,8 196,9 285,8 196,9 285,8 412,8 196,9 285,8 412,8 196,9 285,8 412,8 D 132, E F 171, ,2 171, , , ,2 463, ,2 463, ,2 463,6 G H J 55, K USE USU L M N SW approx. kg DIN mounting from front 1) Not for DIN or A1/A2 inch 2) Not for A1/A2 inch 3063
7 Technical data - Independent chucks Jaw dimensions steel body Reversible one-piece jaw EB Size A B C D E F G H approx. kg 0,8 0,9 1,6 2,25 3,5 4,2 Dimensions steel independent chucks Base jaw GB Size A B C 40,1 40,1 47,1 51,1 51,1 61,1 92,2 D E F 12,7 12,7 12,7 12,7 12,7 12,7 12,7 G 3,1 3,1 3,1 3,1 3,1 3,1 3,1 H 54 63,5 76,2 38,1 38,1 38,1 38,1 J M12 M12 M16 M20 M20 M20 M20 K 7,6 7,6 10,8 10,8 10,8 10,8 10,8 L 21,2 24,4 27,5 27,5 27,5 27,5 26,4 M 19,03 19,03 19,03 19,03 19,03 19,03 19,03 N 38,7 46,6 56,1 56,1 56,1 56,1 55 Grooves Tapped holes approx. kg 0,8 0,9 1,1 1,4 2,2 2,8 3,5 Reversible top jaw UB and unstepped top jaw Adjusting spindle Size A B 83, C D ,5 20, E 13, ,5 18,5 21,5 21, F G ,5 16,5 13,5 13, H SW ) 1) with outer hexagon Chucking capacities of jaw steps (standard values) Size mm A1 min A2 max l1 min l2 max max. swing. dia
USE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationGeared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LATHE CHUCKS INDEPENDENT CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and
More informationLVE - with integrated cylinder
LVE - with integrated cylinder Technical features: Wedge system with integrated clamping cylinder Large through-hole Scope of delivery: Chuck and jaw mounting screws, T-nuts (without top jaws) Unobstructed
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationDURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationKFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
More informationKFE. Power-operated compensating chuck. Techincal features
Power-operated compensating chuck Techincal features Toggle joint lever system Compensation for eccentricities is accomplished by means of a universal ball joint. Large through-hole Made of steel All moving
More informationKFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
More informationSSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)
SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force
More informationKFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LTHE HUKS INDEPENDENT HUKS 2015/2016 We work for customers who have a weakness for our strengths. ompanies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationCoA. Constant Face Drivers. Constant Face Drivers CoA
CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationCollet Chuck manual 08/2010
Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back
More informationHG-F. Quick jaw change ma JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
Quick jaw change ma JAWS SYSTEM FORKARDT For highest speeds Flat gripping force curve 18 16 315 Mdmax. Jaw change in less than 1 minute F G total gripping force (3 jaws) (kn) 14 12 1 8 6 4 2 26 21 16 26
More informationIDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More informationHG-F JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
SYSTEM FORKARDT JAWS Quick jaw change ma For highest speeds Flat gripping force curve 18 315 16 Mdmax. FG Jaw change in less than 1 minute FG total gripping force (3 jaws) (kn) 14 26 12 1 8 21 6 16 4 2
More informationtough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationCONVENTIONAL WORKHOLDING
simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationTURNING AND MILLING IN ONE SET-UP
TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More information3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks
3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks This catalogue describes the key components of a power chucking system featuring the following FORKARDT power chucks: QLC, QLK,
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationVTR Series Track Roller Assembly V-Grooved Stud Type Concentric Ball & Tapered Roller Bearings
VTR Series Track Assembly V-Grooved Type Concentric Ball & Tapered Bearings VTR-3.50E A B C D F FL G H P SD SL T Type Track Width Groove Center Hex Point Shoulder Shoulder Width + Shoulder VTR-1.50 1.50
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationItem no. Initial size D1
Efficient production of bores accurate in dimensions and design on single-spindle and multi-spindle machines. RÖHM designed special floating chucks for reamers with internal coolant supply. The tool locating
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationPRICE LIST 2017 BISON ORIGINALS EMPOWERED BY PRECISION.
PRICE LIST 2017 14 BISON ORIGINALS EMPOWERED BY PRECISION PRICE LIST MARCH 2017 GERARDI WORKHOLDING 3 Single Guide Jaws - Cast Iron Body DIN 6350 Type 3204 3 solid jaws - cast iron body - DIN 6350 3204-80
More informationType AB with limitation of axial backlash
1 of 21 with limitation of axial backlash Flexible pin & bush couplings types KX and KX-D and their combinations Type KX - AB (taper pin design B) Type KX-D - AB (taper pin design B) 2 of 21 is a torsionally
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationProduct Information. Neutral Wall Bushing GOFL
ABB Components Info-No. 2750 515-93en, Rev. 1 From / Date Product Information Neutral Wall Bushing GOFL Description Page Design 2 Voltage tap 2 Dimensions 2 Terminals 2 Mounting instruction Packing 4 Storing
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationOperating Instruction
Operating Instruction Drive element LEWA - ecosmart type LCA with manual stroke adjustment, motor mounted vertically Table of contents 1 General information / safety 1.1 Important preliminary information
More informationKLINGER Piston Valves KVN DN PN 16 I/III with valve ring KX-GT Modul
Page 1 Assembly Instructions and Handling Regulations for KLINGER Piston Valves KVN DN 65 150 PN 16 I/III with valve ring KX-GT Modul DN 125-150 1 Body 2 Bonnet 3 Hand wheel 4 Piston 5 Lantern bush 8 Threaded
More informationNEW POWER-OPERATED CENTERING VICES. Economic and automated clamping with maximum clamping forces and reduced interfering contour
NEW POWER-OPERATED CENTERING VICES Economic and automated clamping with maximum clamping forces and reduced interfering contour POWER-OPERATED CENTERING VICES The new power-operated centering vices have
More informationRotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationSTANDARD PROGRAMME Hydraulic Chucks
20 STANDARD PRORAMME STANDARD PRORAMME 23 Hydraulic Chuck ISO 7388-1, Form AD (prev. DIN 69871-AD), extra short design d 1 d 2 d 3 l3 ISO 7388-1 Form AD 3 µm h6 2.5 25000 min Nominal size SK/ISO Dimensions
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More information10. MOULD CLAMPING. 212 Moulding Supplies Edition 9 // POWER CLAMPS 10.2 STANDARD CLAMPS
10. MOULD CLAMPING 213 214 10.1 POWER CLAMPS 10.2 STANDARD CLAMPS 212 Moulding Supplies Edition 9 // www.mouldpro.com POWER CLAMPS POWER SLIDING CLAMP Part No. Thread Size h-min h-max s e1 d sw L e b c
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationSi 2323 / Si 2324 / Si 2325
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si 2323 / Si 2324 / Si 2325 Features Straightforward design for high pressures The regular flow safety
More informationOperation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation
Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation General The Eltool Livetool Angle Heads can provide years of service if properly used and maintained. The Livetool uses
More informationAssembly Instructions and Handling Regulations for KLINGER. Piston Valves KVN DN VI,VIII and Regulating Piston KVRLN DN , PN 40 VI, VIII
Page 1 Assembly Instructions and Handling Regulations for KLINGER Piston Valves KVN DN 65-200 VI,VIII and Regulating Piston KVRLN DN 65-200, PN 40 VI, VIII pressure released type with valve ring KX-GT
More informationPower Chucks B & BT Series
Power Chucks B & BT Series B Series Three-jaw and two-jaw wedge style power chucks are ideal for high speed chucking, bar chucking and universal machining. These deliver consistent accuracy and repetitive
More information> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation
Block CYLINDERS for VARIOUS DESIGN APPLICATIONS > clamping force up to 155.5 kn > operating pressure up to 500 bar > piston with internal thread > for push- and pull operation > with longitudinal and cross
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationKFD-HS. Power chucks with through-hole. Technical features:
K-S ower cucks wit troug-ole ecnical features: Wedge ook system wit annular piston for igest accuracy in case of loss of centrifugal force bove-average mecanical efficiency Very few components, long jaw
More informationComponents for parallel kinematics
Components for parallel kinematics Series GLK, GLAE Joints and struts form the core components of machines with parallel kinematics (PKM). Irrespective of the control technology possibilities, good mechanical
More informationFNC Power Chucks with Quick Change Jaw System
260.10.05 E 10/05 FNC Power Chucks with Quick Change Jaw System This catalogue describes all components of the FNC universal, quick jaw change, power chucking system. Should you require further information
More informationSTIH) Technical Information Cut-off machine STIHL Cutquik TS 700, 800 Series Guard with defined adjustment range (TS 700 only)
STIH) Technical Information 06.00 Cut-off machine STIHL Cutquik TS 700, 800 Series 44 Contents. Guard with defined adjustment range (TS 700 only). Instruction labels. Securing of the V-belt guard 4. Summary.
More informationSi 6303 / Si 6304 / Si 6305
Si 6303 / Si 6304 / Si 6305 Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Si 6303 / Si 6304 / Si 6305 Si 6303 / Si 6304 / Si 6305 Features Engineered for high
More information3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
More informationDS 18DVB DS 18DVB POWER TOOLS CORDLESS DRIVER DRILL TECHNICAL DATA AND SERVICE MANUAL MODEL
MODEL DS 18DVB POWER TOOLS D CORDLESS DRIVER DRILL DS 18DVB TECHNICAL DATA AND SERVICE MANUAL LIST No. F844 Aug. 2001 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT Notice for use Specifications
More information1.28 ACCESSORY DRIVE. Accessory Drive Assembly Related Parts (Former Design) SERIES 60 SERVICE MANUAL. 1. Locknut 8. Drive Gear
SERIES 60 SERVICE MANUAL 1.28 ACCESSORY DRIVE The accessory drive assembly is mounted to the front of the gear case cover and utilizes a two-groove pulley to drive the alternator. See Figure 1-413, and
More informationDISASSEMBLY AND ASSEMBLY
211-02-1 Power Steering 211-02-1 DISASSEMBLY AND ASSEMBLY Steering Gear Special Tool(s) Holding Fixture, Transmission 307-003 (T57L-500-B) Special Tool(s) Installer, Worm Bearing Locknut 211-012 (T66P-3553-B)
More informationFRP Ball Valves INSTALLATION & MAINTENANCE MANUAL
FRP Ball Valves INSTALLATION & MAINTENANCE MANUAL FRP BALL VALVES TABLE OF CONTENTS MAINTENANCE AND INSTALLATION INSTRUCTIONS 1. 2. 2.1 2.2 2.3 2.4 GENERAL...Page 1 HANDLING...1 Receiving and Storing...1
More informationKLINGER. Instructions for installation and operation of. Reflex level gauges K D asbestos-free. wt 3017/11 Page 1.
Page 1 Instructions for installation and operation of KLINGER Reflex level gauges K D asbestos-free Edition: 06/2003 Fluid Control GmbH Am Kanal 8-10 A-2352 Gumpoldskirchen/AUSTRIA Telefon:++43(0) 2252
More informationInstallation and Operating Instructions for EAS -NC clutch Type 45_. _. _ Sizes 02 and 03
Table of contents: Please read and observe this Operating Instruction carefully! A possible malfunction or failure of the clutch and any damage may be caused by not observing it. Page 1: - Table of contents
More informationJTEKT Toyoda Americas Corporation
JTEKT Toyoda Americas Corporation 316 W. University Drive, Arlington Heights, IL 60004 Toll Free: 800-257-2985 Main: 847-253-0340 Fax: 847-253-0540 www.toyoda.com JTEKT Toyoda Americas Corporation Designed
More informationREAR DRIVE SHAFT (3S GTE ENGINE)
SA52 REAR DRIVE SHAFT (3SGTE ENGINE) COMPONENTS SA53 NOTICE: The axle bearing could be damaged if it is subjected to the vehicle weight, such as when moving the vehicle with the drive shaft removed. Therefore,
More information> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar
Vertical and link CLAMPS for DEMANDING TASKS vertical CLAMP > piston force up to 20,1 kn > operating pressure 250/350 bar > chemically nitrided body link CLAMP > piston force up to 44,0 kn > operating
More informationHitachi. Power Tools DS 12DVF3 DS 9DVF3 DS 12DVF3 DS 9DVF3 CORDLESS DRIVER DRILLS TECHNICAL DATA AND SERVICE MANUAL MODELS
MODELS DS 12DVF3 DS 9DVF3 Hitachi Power Tools D CORDLESS DRIVER DRILLS DS 12DVF3 DS 9DVF3 TECHNICAL DATA AND SERVICE MANUAL DS 12DVF3 LIST Nos. DS 12DVF3: G818 DS 9DVF3: G817 Mar. 2005 SPECIFICATIONS AND
More informationClamping equipment. Drill chucks Reducing bushes Centre points Front-face carrier. From page 40-3
equipment rill chucks Reducing bushes Centre points Front-face carrier From page 40-3 and-operated chuck Power chuck Collet chuck ydraulic cylinder From page 40-17 Jaws Slot nuts From page 40-34 ssembly
More informationFor advanced drive technology CLAMPEX. Shaft-hub-connection. KTR Precision joints CLAMPEX
technology CLAMPEX Shaft-hub-connection CLAMPEX KTR Precision joints 227 technology Table of contents Page Brief information 228 Selection and calculation 25-255 CLAMPEX -Selection Shaft diameter = d 0
More informationMR 25 to 200 : Worm wheel and screw kinematics. MR 400 to 1600 : Yoke kinematics. Output torques up to Nm. External coating.
Type series booklet 8505.12/12--10 MR manual actuators MR 25 to 200 : Worm wheel and screw kinematics MR 400 to 1600 : Yoke kinematics MR 400 to 1600 MR 25 to 200 Output torques up to 16 000 Nm Applications
More informationFlexible pin & bush coupling
Technical data KX-D Technical data Torque [Nm] NBR 80 Sh-A GJL Steel Dyn. torsion spring stiffness [Nm/rad] Max. speed Max. speed Rated Max. Vibratory [rpm] with Max. bore [mm] [rpm] with Max. bore [mm]
More informationHandwheels, handles, position indicators
Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium
More informationCentres-Live Chucks Type
Centres-Live Chucks Type 300-422 Face Drivers Type 300-303 with mechanical compensation 2 4 5 6 7 3 8 9 1 Very large bearing surface. Housing moves with centre to compensate for diefferent sizes of component
More information