Item no. Initial size D1

Taper shank arbors for drill chucks

KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole

EGH-1880, ELITE 18X80 LARGE SPINDLE BORE CLUTCH LATHE

When precision matters the most. The large spindle bore Elite lathes are the signature machines within the Elite lathe lineup. Engineered to meet world-class tolerances for spindle run out, bed alignment,

E-1236VS, ELITE 12X36 EVS LATHE

EVS LATHES COMPACT. POWERFUL. PERFECTION. These lathes pack large lathe features into compact footprints that make them perfect for schools, small shops, and engineering labs. Featuring an Electro-magnetic

enduring. Drill Chucks NC-Tooling 2013/2014

enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type

TECHNICAL INFORMATION

Radial Roller Bearings Fitting and Mounting Fixed Bearings and Float Bearings Radial and axial loads in bearing units can be transmitted by fixed and floating bearings A fixed bearing is generally used

CAPTIS. The modular and flexible system for internal and external clamping

NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high

ER Collets Nuts Disks

Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50

BEST OF 2014 January December

Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

Spindle Components. Pipe Threading Machine Ridge Tool Company/Elyria, Ohio, U.S.A. 123

Pipe Threading Machine 0 Spindle Components 0 Centering Jaw Set 0 Centering Head Centering Scroll 00 Roll Pin /" x /" () Retaining Ring 0 Rear Spindle Bearing 0 Front Spindle Bearing Drive Shaft Spacer

Spindle Components. Pipe Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

0 Spindle Components 0 Centering Jaw Set 0 Centering Head Centering Scroll 00 Roll Pin / x / () Retaining Ring Rear Spindle Bearing Front Spindle Bearing Drive Shaft Spacer Ring 0 0 Hand Wheel Scroll Jaw

Swiss Automatic Tooling

Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets

Radial Drilling And Milling Heads TYPE HAAS

Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106

FOR EVERY APPLICATION

FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders with through-hole in their product range. hydraulical

Live and Dead Centres

s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for

Collet Chuck manual 08/2010

Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back

List of parts for SAB 128 Mk 4

List of parts for SAB 28 Mk 4 Pos. Compressor complete, HF 46-6 Compressor komplete, HM 46-7 Compressor housing 0 Rotor housing, SAB 28 30-052 Bearing cover at suction end 20 Suction cover for SAB 28 303-39

tough. Live Centers Face Drivers 2013/2014

tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers

Steel / Cast iron body Independent chucks

Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design

LVE - with integrated cylinder

LVE - with integrated cylinder Technical features: Wedge system with integrated clamping cylinder Large through-hole Scope of delivery: Chuck and jaw mounting screws, T-nuts (without top jaws) Unobstructed

Clamping Tools

Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves

BEST OF 2015 January December

BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

List of parts for SAB 163 Mk 4

03.0 List of parts for SAB 63 Mk 4 Relevant drawings 0662-740 Pos. Compressor complete, male, Man. V i 46-62 Compressor complete, female, Man. V i 46-63 Compressor complete, male, Auto. V i 46-64 Compressor

Clamping technology. MAPAL Floating holder. for multi-bladed high performance reamers NEW

Clamping technology MAPAL Floating holder for multi-bladed high performance reamers NEW 2 Floating holder for MAPAL multi-cutting reamers When using reamers on lathes it is often necessary to compensate

Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6

NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules

d -2,5 26,5 mm D -3,4 33 mm L mm; МК D mm L mm D mm L mm

KAMAZ Publicly Traded Company Repair and Tooling Plant Tool making 2018 Twist drills Auger drills Drills with a thickened core Centre drills Twist step drills Solid carbide drills Inserted-blade drills

JAWS INDIVIDUALLY ADJUSTABLE

JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING

LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center

TECHNICAL INFORMATION

General Nomenclature Spherical Roller Bearings The spherical roller bearing is a combination radial and thrust bearing designed for taking misalignment under load When loads are heavy, alignment of housings

Accurate Precision Machining R12/16/20 CNC VERTICAL LATHE ISO 9001

Accurate Precision Machining R12/16/20 CNC VERTICA ATHE ISO 9001 ABOUT RADAR Radar Industrial Co., td., established in 2007, has more than 50 years of experience in manufacturing professional machine tools

Profile rollers PEVOLON PEVOLASTIC

Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities

Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 20 D. Universal lathes with toolmaking precision for industrial applications

Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 2 D Universal lathes with toolmaking precision for industrial applications EMCOMAT 14 S/14 D EMCOMAT 17S/17D/2D The Technology The EMCOMAT 14 S/14

FAG BAX Axial Bearings. High speed bearings for main spindles

FAG BAX Axial Bearings High speed bearings for main spindles High speed bearings for main spindles FAG BAX Axial Bearings Ordering example: BAX110-F-T-P4S-DBL Overall, this means increases in productivity

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your

BEST OF A selection of our most popular products. To view the complete range visit

BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it

Performance requires quality.

131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21

PROVEN CHUCK WITH SPIRAL RING

PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping

Tutorial: Calculation of two shafts connected by a rolling bearing

Tutorial: Calculation of two shafts connected by a rolling bearing This tutorial shows the usage of MESYS shaft calculation with multiple shafts. The shaft calculation software provides different views

CoA. Constant Face Drivers. Constant Face Drivers CoA

CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products

THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit

Typhoon B Series CNC Turning Centres

Typhoon B Series CNC Turning Centres www.colchester.co.uk Typhoon B Series CNC Turning Centres The Typhoon B Series constructed from a one piece cast, base incorporates FEM analysis to achieve an optimal

GMS SERIES Tool Spindle Type 5-axis Turning Centers

GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide

Floating Holder. Radial float and angular float mechanisms compensate for misalignment between reamer and pre-drilled hole.

Specialize Applications ing Holer Specialize Relate Stub Holer Tapping Chuck Tap Aapter Aapter Enmill Chuck Straight Chuck ing Holer High precision reaming with special purpose machines an transfer lines.

Geared scroll chuck with optimized design

Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle

ROTARY TABLE SELECTION GUIDE

ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East Windsor,

Typhoon L Series CNC Turning Centres

Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal

TURNING AND MILLING IN ONE SET-UP

TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The

Guide units. For toolmaking, fixture manufacturing and machine engineering

Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar

LVE - with large through-hole

LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable

PARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )

Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.

Dismounting of rolling bearings Mechanical dismounting

Mechanical dismounting Dismounting methods Mechanical dismounting In order to prevent damage during the dismounting of bearings, various dismounting methods are used depending on the bearing size and type

Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders

Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are

Technical Information

Technical Information TI No. WL 80-48 E April 1999 Rolling Bearings FAG Mechanical Extractors Small rolling bearings with bore diameters of up to about 100 mm which have an interference fit on the shaft

Contents. ECCO single-phase. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy

Contents Contents 1. Scissors assy.... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assy.... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...

ACE LOCK Milling Chucks

ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter

Geared scroll chuck with optimized design

Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle

MAB 525 MOTOR BREAKDOWN

PARTS BREAKDOWN Model #: MAB 525 Bulletin #: 08-2011 MAB 525 MOTOR BREAKDOWN Page 1 of 5 PARTS BREAKDOWN Model #: MAB 525 Bulletin #: 08-2011 MAB 525 MOTOR PARTS LIST 1 5010581 Screw 4,8 x 45 2 5010911

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS

CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of

POWER CHUCKS CYLINDERS / STEADY RESTS

POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive

Operating Instructions Thread Rolling Heads F 001, F 01, K 01-1

Head in fixed application (for F and K types): The front part of the head is turned by using the handle (25) with the ball (23) (if used on automatics, closing is accomplished by using closing roller over

Contents SIGMA. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy

Contents Contents 1. Scissors assy.... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assy.... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...

Good reasons to use Albrecht drill chucks

3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened

Hollow Spindle Oil Country Lathes

Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400

PRECI-FLEX. The Flexible Tool System

PRECI-FLEX The Flexible Tool System EXSYS Tool, Inc. T:800.397.9748 F:800.397.9739 P:352.588.4345 www.mazaktooling.com CONTACT INFORMATION TABLE OF CONTENTS Main Distribution for USA Mexico Canada Repair

CNC Ultra High Precision. UHP-Turn 450. High precision spindle precision of = <0.8 µm

CNC Ultra High Precision UHP-Turn 45 High precision spindle precision of =

Heavy-Line. GU System

GU ystem Guide rails GU..M, GU..MT GU...MT 90 ± 0' G H c h g sm b + 0,05 D I I GU...M 90 ± 5' L 0,02 H c h b + 0,05 0, 0,02 The longitudinal slot, made with + 0.05 tolerance, permits using reference elements

April 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe

CLASSIFICATION OF ROLLING-ELEMENT BEARINGS

CLASSIFICATION OF ROLLING-ELEMENT BEARINGS Ball bearings can operate at higher speed in comparison to roller bearings because they have lower friction. In particular, the balls have less viscous resistance

July 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory

Introduction of pamphlets and catalogs 1. Bearings

Introduction of pamphlets and catalogs 1. Bearings 1-1 General Bearings Large size ball & roller bearings (CAT.NO.B2002E) This catalog provides information on various large size ball and roller bearings

KTA SPINDLE TOOLINGS

Price INR R 2013 KTA SPINDLE TOOLINGS SILVER SERIES PRECISION TOOL HOLDERS FOR CNC MACHINES HSK DIN 69893-1 FORM A Features : Special Material with Tensile NEW 2 strength inthe Core Min 950 N/mm. Case

RT800 Roundness Measurement Systems

RT800 Measurement Systems Starrett RT800 High speed roundness systems for bearings, automotive and precision industries RT800 A range of roundness products robust enough for the shop floor but accurate

DC 5-SPEED AUTOMATIC TRANSMISSION

03 1. OVERVIEW 2WD 4WD DCAG 5speed automatic transmission is an electronically controlled 5speed transmission with a lockup clutch in the torque converter. The ratios for the gears are realized by three

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

Overview. There are three (3) New Era Units Available. Two (2) of these units are designed to wind up a product web.

Overview There are three (3) Units Available. Two (2) of these units are designed to wind up a product web. The web widths these units are capable of handling are From 50 wide to 13 wide The Winders have

BEARING UNITS BEARINGS LINEAR MOTION PRODUCTS

Motion Creator BEARING UNITS BEARINGS LINEAR MOTION PRODUCTS L ATELIER DE FABRICATION MANUFACTURING WORKSHOP 2 Multi spindle Machining Centers 2 Axis 4 Multi spindle machining Centers 3 Axis 2 Multi spindle

RT500 RT800. Roundness Measurement Systems

RT500 RT800 Measurement Systems Starrett RT800 High speed roundness systems for bearings, automotive and precision industries A range of roundness products robust enough for the shop floor but accurate

Drive Shaft, Disassemble and Reassemble

Page 1 of 9 Drive Shaft, Disassemble and Reassemble 1. Illustration of drive shaft 1. Drive shaft 2. Needle roller bearing 3. 5th gear (driving) 4. Radial needle roller bearing 5. 3rd gear (driving) 6.

G0616 Column & Base Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P06160001 CAP SCREW M8-1.25 X 140 49 P06160049 SPLINED SHAFT 2 P06160002 REAR ACCESS PANEL 50 PK79M KEY 10 X 8 X 55 3 PVA58

Design principle / Technical features

Design principle / Technical features Components and construction groups IV 4 Stationary opening unit - Construction group IV. Non-rotating distributor. Non-rotating housing. Housing, axial movable Power

15QRHD Series Positive Feed Drill

15QRHD Series Positive Feed Drill January 2015 2014 APEX TOOL GROUP 1 Product Overview Productivity 1.0hp/1.5hp options at the spindle to maximize cutting speed Governed vane motor option to minimize speed

LVE - with integrated pneumatic cylinder

LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic

Spare parts list Pentruder 6-16

Spare parts list Pentruder 6-16 Page A-G Pentruder 6-16 Page A Spare parts list Pentruder 6-16 Page A 6-16-A01 56020100 Chassis 6-16 6-16-A02 34190100 Gear shaft primary 6-16 6-16-A03 35130100 Gear wheel

Model Building Process

Model Building Process SMT, CHARTWELL HOUSE, 67-69 HOUNDS GATE, NOTTINGHAM, NG1 6BB tel. +44 (0)115 941 9839 fax. +44 (0)115 958 1583 Adding a Shaft Right Click on New Design and select Shaft in Add the

This is trial version

Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.

10 Thrust ball bearings

10 Thrust ball bearings Designs and variants.............. 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages............................ 1010 Bearings

APPLICATIONS APPLICATIONS

APPLICATIONS APPLICATIONS TWO STROKE ENGINE FOR PORTABLE SAW The high speeds attained by these engines subject the connecting rod bearings to extremely arduous working conditions, made worse by doubtful

Tooling for Swiss Automatics

Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical

That s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance

[ That s ] E[M]CONOMY: NEW Not just training: Real action! CONCEPT TURN 260 CNC training with industrial performance Concept TURN 260 As a systematic advancement of the CT250, the CT260 convinces by its

JAWS INDIVIDUALLY ADJUSTABLE

JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT

20-G SERIES PRECISION DIE GRINDERS (.2 hp) 40-G & 41-G SERIES DIE GRINDERS (.9 hp) 4110 & 4111 SERIES DIE GRINDERS (.9 hp)

20-G SERIES PRECISION DIE GRINDERS (.2 hp) DIE GRINDER KIT (Add a "K" to end of tool model number). Includes: (1) 20-G or 20-GM (1) 3 /,6" dia. x 5' long hose (4) '/a" carbide burrs - Cylindrical plain

FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4

FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp

SADDLE TYPE MANUAL FEATURES: SADDLE TYPE FEATURES:

SADDLE TYPE MANUAL FEATURES: Meehanite cast iron of base, column, saddle, and table provides greater rigidity and highest possible grinding load capacity Ball bearing slideways resist damage due to impact

July 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty

ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory

Chapter 11 Rolling Contact Bearings

Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline Bearing Types Bearing Life Bearing Load Life at Rated Reliability Bearing Survival: Reliability versus Life Relating Load, Life, and Reliability

Bearing Fundamentals. Timken Training

Bearing Fundamentals Timken Training AGENDA Basic Bearing Design Ball Bearings Cylindrical Roller Bearings (CRB) Spherical Roller Bearings (SRB) Tapered Roller Bearings (TRB) 2 BASIC BEARING DESIGN Anti-Friction

KFD-HE. Power chucks with through-hole

K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.

Clutch Repairs (465) Copyright GEDORE Automotive GmbH, Germany. formerly

Copyright GEDORE Automotive GmbH, Germany (465) -01 KL-0500-45 KA Clutch Tool Set (SAC), in a Plastic Storage Case (Pat.) Suitable for Self-Adjusting Clutches (with 6 and 8 bolt holes); e.g. on VW-Audi,

Operating Instruction

Operating Instruction Drive element LEWA - ecosmart type LCA with manual stroke adjustment, motor mounted vertically Table of contents 1 General information / safety 1.1 Important preliminary information

WSK COLLET CHUCK CHCHUCK WSK COLLETWS UC K K CO LL ET 74

WS K COLLET COLL CO LLET ET CHUC CH UCK 74 MAS403 BT-P CODE NO. D1 D2 L1 COLLET NUT G1 BT30 P6-2.0-6.0 19.6 6 N6 M8X1.0 P10-2.0-10.0 27.5 10 N10 M11X1.0 P6-2.0-6.0 19.6 P6-6 N6 M8X1.0 BT40 P10-2.0-10.0