Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.

Size: px
Start display at page:

Download "Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837."

Transcription

1 Joints 825

2 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular and radial offset compensation K0711 Fork joints with snapon spring K0731 Fork joints in stainless steel K0732 Fork joints K0733 Ball joints DIN K0734 Ball seats for angle joints DIN K0712 Ball studs for angle joints DIN K0713 Page 828 Page 829 Page 830 Page 831 stainless steel Page 832 Page 833 Page 834 Page new article Circlips for ball seats DIN K0714 Axial joints similar to DIN K0715 Rod ends with ball bearing external thread K0716 Rod ends with ball bearing internal thread K0717 Rod ends with slide bearing external thread K0718 Rod ends with slide bearing internal thread K0719 Rod ends with slide bearing external thread, stainless steel K0720 Rod ends with slide bearing internal thread, stainless steel K0721 Rod ends with slide bearing external thread, narrow head K0722 Page 837 Page 838 Page 839 Page 840 Page 841 Page 842 stainless steel Page 843 stainless steel Page 844 Page 836 Page 845 extended article

3 Product overview Joints Rod ends with slide bearing internal thread, narrow head K0723 Page new article extended article

4 K0709 Quick plug couplings with radial offset compensation external thread application example: X max. internal thread Material, surface finish: Coupling part and claw in steel, heat-treated and phosphated. Nut (DIN 439) in steel, black oxide finish; quality class 8.8 K Quick plug couplings with radial offset compensation for multiple applications, e.g. as a link between a piston rod and a linear-movement unit. Assembly and disassembly of this simple, solid and two-part coupling is carried out by means of a T-slot; a manual re-adjustment is not necessary. The quick plug coupling can be linked to all commonly used pneumatic and hydraulic lifting cylinders via the connecting thread. The quick plug coupling does not transmit any torque. KIPP Quick plug couplings with radial offset compensation 828 Order No. Surface finish D D1 ~L L1 L2 L3 L4 SW SW1 Max. radial shift Max. permissible tensile and Approx. min. min. compensation compressive stress in weight kn kg K Internal thread M , ,6 2,5 0,045 K Internal thread M ,5-11,5 22, ,7 4,5 0,089 K Internal thread M , ,7 6,5 0,155 K Internal thread M10x1, , ,7 6,5 0,155 K Internal thread M12 32,5 66,7 17, ,8 10 0,220 K Internal thread M12x1,25 32,5 66,7 17, ,8 10 0,220 K Internal thread M ,397 K Internal thread M16x1, ,398 K Internal thread M , ,5 45, ,599 K Internal thread M20x1, , ,5 45, ,594 K External thread M , ,6 2,5 0,042 K External thread M , ,5 22, ,7 4,5 0,084 K External thread M , ,7 6,5 0,144 K External thread M10x1, , ,7 6,5 0,145 K External thread M12 32,5 66, ,8 10 0,205 K External thread M12x1,25 32,5 66, ,8 10 0,205 K External thread M ,384 K External thread M16x1, ,385 K External thread M , ,5 45, ,568 K External thread M20x1, , ,5 45, ,568

5 K0710 Quick plug couplings with radial offset compensation and screw-on flange external thread X max. internal thread Material, surface finish: Coupling part and flange in steel, heat-treated and phosphated. Nut (DIN 439) in steel, black oxide finish; quality class 8.8 K application example: Quick plug couplings with radial offset compensation requiring only little space. Suitable for multiple applications, e.g. as a link between a piston rod and a linear-movement unit. Assembly and disassembly of this simple, solid and two-part coupling is carried out by means of a T-slot; a manual re-adjustment is not necessary. The quick plug coupling can be linked to all commonly used pneumatic and hydraulic lifting cylinders via the connecting thread. The quick plug coupling does not transmit any torque. KIPP Quick plug couplings with radial offset compensation and screw-on flange Order No. Surface finish D D1 D2 D3 A A1 ~L L1 L2 L3 T SW Max. radial shift Max. permissible tensile and Approx. min. compensation compressive stress in weight kn kg K Internal thread M6 42 5, , ,4 10 0,6 2,5 0,076 K Internal thread M8 48 6, ,5 13,5-13 6,4 13 0,7 4,5 0,122 K Internal thread M , , ,4 17 0,7 6,5 0,184 K Internal thread M10x1, , , ,4 17 0,7 6,5 0,184 K Internal thread M , ,2 17,5-20,5 6,4 19 0,8 10 0,276 K Internal thread M12x1, , ,2 17,5-20,5 6,4 19 0,8 10 0,276 K Internal thread M ,5 12, , ,449 K Internal thread M16x1, ,5 12, , ,449 K Internal thread M ,845 K Internal thread M20x1, ,840 K External thread M6 42 5, , ,4 10 0,6 2,5 0,073 K External thread M8 48 6, ,5 13, ,4 13 0,7 4,5 0,116 K External thread M , , ,4 17 0,7 6,5 0,173 K External thread M10x1, , , ,4 17 0,7 6,5 0,174 K External thread M , , ,5 6,4 19 0,8 10 0,261 K External thread M12x1, , , ,5 6,4 19 0,8 10 0,262 K External thread M ,5 12, , ,431 K External thread M16x1, ,5 12, , ,433 K External thread M ,815 K External thread M20x1, ,

6 K0711 Quick plug couplings with angular and radial offset compensation max. 4 max. 4 D X max. Material, surface finish: Coupling part in tempered steel, nitrided, black. Claw and seat in steel, heat-treated and phosphated. Nut in tempered steel, phosphated. Locking nut (EN 24035) in steel, quality class 8.8, black. Spring in stainless steel K Quick plug coupling, adjustable without axial play, including angular and radial offset compensation. Suitable for multiple applications, e.g. for non-aligned linear-movements. Solid and compact design, no loose elements. Assembly and disassembly is carried out by means of a T-slot; a manual re-adjustment is not necessary. The quick plug coupling can be linked to all commonly used pneumatic and hydraulic lifting cylinders via the connecting thread. The quick plug coupling does not transmit any torque. application example: KIPP Quick plug couplings with angular and radial offset compensation 830 Order No. D D1 D2 ~L L1 L2 L3 L4 L5 SW SW1 SW2 SW3 Max. radial shift Max. permissible tensile and Approx. min. compensation compressive stress in weight kn kg K M6 24,5 9, , , ,6 2,5 0,075 K M , , ,6 4,5 0,135 K M , ,7 6,5 0,403 K M10x1, , ,7 6,5 0,403 K M , ,7 10 0,405 K M12x1, , ,7 10 0,409 K M ,090 K M16x1, ,094 K M ,136 K M20x1, ,143

7 K0731 Fork joints with snap-on spring Fork head and bolts of free-cutting steel, spring leg of spring steel Galvanized and chromated K On request: Left-handed thread. H9 D1 h11 KIPP Fork joints with snap-on spring Order No. Surface finish D1 D2 D3 L1 L2 L3 ~L5 ~L6 A B G Approx. weight g K right-handed thread 5 M , ,0 K right-handed thread 6 M ,0 K right-handed thread 8 M ,0 K right-handed thread 8 M ,0 K right-handed thread 10 M ,0 K right-handed thread 10 M10x1, ,0 K right-handed thread 10 M ,0 K right-handed thread 10 M10x1, ,0 K right-handed thread 12 M ,0 K right-handed thread 12 M12x1, ,0 K right-handed thread 12 M ,0 K right-handed thread 12 M12x1, ,0 K right-handed thread 14 M , ,0 K right-handed thread 16 M ,0 K right-handed thread 16 M16x1, ,0 831

8 K0732 Fork joints in stainless steel stainless steel H9 D1 h11 Stainless steel Natural finish K On request: Left-handed thread. KIPP Fork joints in stainless steel 832 Order No. D1 D2 D3 L2 A B G Approx. weight kg K M ,011 K M ,018 K M ,046 K M ,062 K M ,091 K M10x1, ,091 K M ,120 K M ,150 K M12x1, ,150 K M ,201 K M12x1, ,201 K M ,218 K M ,338 K M16x1, ,338

9 K0733 Fork joints H9 D1 h11 Free-cutting steel Galvanized K On request: Left-handed thread. KIPP Fork joints Order No. Surface finish D1 D2 D3 L1 L2 L3 A B G Approx. weight g K right-handed thread 5 M , ,0 K right-handed thread 6 M ,0 K right-handed thread 8 M ,0 K right-handed thread 8 M ,0 K right-handed thread 10 M ,0 K right-handed thread 10 M10x1, ,0 K right-handed thread 10 M ,0 K right-handed thread 10 M10x1, ,0 K right-handed thread 12 M ,0 K right-handed thread 12 M12x1, ,0 K right-handed thread 12 M ,0 K right-handed thread 12 M12x1, ,0 K right-handed thread 14 M , ,0 K right-handed thread 16 M ,0 K right-handed thread 16 M16x1, ,0 833

10 K0734 Ball joints DIN Form C without securing clip H9 D1 h9 Form CS with securing clip securing clip DIN Steel or stainless steel galvanized and chromated; stainless steel natural finish K On request: Left-handed thread. KIPP Ball joints DIN Order No. Form Material D1 D2 D3 A L2 L3 E SW Approx. weight g 834 K C steel 8 M ,2 7 15,2 K C steel 10 M ,5 8 25,2 K C steel 13 M ,1 K C steel 16 M , ,8 K C steel 16 M , ,8 K C steel 19 M14x1, , ,9 K C steel 19 M , ,9 K CS steel 8 M ,2 7 15,2 K CS steel 10 M ,5 8 25,2 K CS steel 13 M ,1 K CS steel 16 M , ,8 K CS steel 16 M , ,8 K CS steel 19 M14x1, , ,9 K CS steel 19 M , ,9 K CS stainless steel 8 M ,2 7 15,2 K CS stainless steel 10 M ,5 8 25,2 K CS stainless steel 13 M ,1 K CS stainless steel 16 M , ,8 K CS stainless steel 16 M , ,8

11 K0712 Ball seats for angle joints DIN Form A with snap ring H9 D1 Form B with snap ring and slot for securing clip Steel galvanized and chromated K The ball sockets are spare parts for DIN ball joints. See circlips for ball seats for suitable retaining rings for Form B. Stainless steel ball joints available on request. KIPP Ball seats for angle joints DIN Order No. Order No. D1 D2 D3 A E Form A Form B K K M ,2 K K M ,5 K K M K K M ,5 K K M ,5 K K M14x1, ,5 K K M ,5 835

12 K0713 Ball studs for angle joints DIN Form B with rivet pin Form C with threaded pin and SW Steel galvanized and chromated D6 h11 D1 h9 D1 h9 K The ball pivots are spare parts for DIN ball joints. KIPP Ball studs for angle joints DIN Order No. Form Surface finish D1 D2 D3 D5 D6 L2 L3 L5 L6 L7 SW Approx. min. max. weight g 836 K B short ,85 K B short ,5-7,10 K B short ,20 K B short ,50 K B short ,20 K B long ,5-4,35 K B long ,80 K B long ,00 K B long ,60 K B long ,70 K C - 8 M ,2 9 1, ,6 K C - 10 M ,5 11 1, ,5 K C - 13 M ,5 13 1,5 5, ,7 K C - 16 M ,5 7, ,1 K C - 16 M ,5 7, ,1 K C - 19 M14x1, , ,2

13 K0714 Circlips for ball seats DIN Spring steel galvanized and chromated K For Ball seats DIN KIPP Circlips for ball seats DIN Order No. Type D8 Y Suitable for ball sockets with D1 K S K S10 8,7 12,5 10 K S ,7 13 K S K S

14 K0715 Axial joints similar to DIN H9 D1 h9 Steel galvanized and chromated K Axial joints with greater extraction force and left-hand thread available on request. KIPP Axial joints similar to DIN Order No. D1 D2 A LA L3 E Extraction force F Approx. in N weight kg K M ,2 9 10,2 30 0,015 K M , ,5 40 0,025 K M , ,053 K M ,5 80 0,104 K M14x1, , ,221

15 K0716 Rod ends with ball bearing external thread D H7 Casing: drop-forged steel, tempered. Galvanized. Internal Clearance µm. K The hardened ball bearing is long-term greased and sealed with cover washers. The connection dimensions comply with DIN 648 Form Series KA. Rod ends are primarily used where movement processes are transmitted and there is no exact alignment. KIPP Rod ends with ball bearing external thread Order No. Order No. D D1 A B H H1 K L L1 α Dynamic Static Rev. limit n Approx. right-handed thread left-handed thread base loads base loads max. 1/min weight N N kg K K M , ,019 K K M , , ,036 K K M , ,060 K K M , , ,087 K K M ,190 K K M20x1, , ,338 K K M22x1, ,

16 K0717 Rod ends with ball bearing internal thread D H7 Casing: drop-forged steel, tempered. Galvanized. Internal Clearance µm. K The hardened ball bearing is long-term greased and sealed with cover washers. The connection dimensions comply with DIN 648 Form Series KA. KIPP Rod ends with ball bearing internal thread Order No. Order No. D D1 D2 D3 A B B1 H H1 K L L1 SW α Dynamic Static Rev. limit n Approx. left-handed thread right-handed thread base loads base loads max. 1/min weight N N kg 840 K K M8 12, , , ,044 K K M20x1,5 27, , ,367 K K M , ,024 K K M22x1, ,480 K K M ,224 K K M , , ,072 K K M12 17, , , , ,107

17 K0718 Rod ends with slide bearing external thread D H7 Casing size (D) 5-12: free-cutting steel, turned. Casing from size (D) 16: tempered steel, forged. Ball joint: roller bearing steel, hardened, ground and polished. Bearing shell: free-cutting steel with PTFE cloth glued in galvanized K The slide bearing of the rod ends is maintenance-free. The connection dimensions comply with DIN 648 Form Series KA. KIPP Rod ends with slide bearing, external thread Order No. Order No. D D1 A B H H1 K L L1 α Dynamic Static Approx. right-handed thread left-handed thread base loads base loads weight kn kn kg K K M , ,5 4,3 0,013 K K M ,75 12, ,3 6 0,020 K K M , ,7 11 0,033 K K M ,5 19, ,4 17,4 0,056 K K M , ,5 0,087 K K M , ,7 32 0,189 K K M20x1, , ,1 43,8 0,348 K K M22x1, , ,2 52,6 0,

18 K0719 Rod ends with slide bearing internal thread D H7 Casing size (D) 5-12: free-cutting steel, turned. Casing from size (D) 16: tempered steel, forged. Ball joint: roller bearing steel, hardened, ground and polished. Bearing shell: free-cutting steel with PTFE cloth glued in galvanized K The slide bearing of the rod ends is maintenance-free. The connection dimensions comply with DIN 648 Form Series KJ. KIPP Rod ends with slide bearing internal thread Order No. Order No. D D1 D2 D3 A B B1 H H1 K L L1 SW α Dynamic Static Approx. right-handed thread left-handed thread base loads base loads weight kn kn kg 842 K K M , ,5 8 0,018 K K M ,75 12, ,3 8,9 0,027 K K M8 12, , ,7 14,1 0,046 K K M , ,5 19, ,4 19,3 0,076 K K M10x1, , ,5 19, ,4 19,3 0,076 K K M12 17, , , ,5 0,115 K K M12x1,25 17, , , ,5 0,115 K K M , ,7 32 0,230 K K M16x1, , ,7 32 0,230 K K M20x1,5 27, , ,1 43,8 0,415 K K M22x1, , ,2 52,6 0,540

19 K0720 Rod ends with slide bearing external thread, stainless steel stainless steel D H7 Casing: forged special steel Ball joint hardened and ground. Bearing shell: stainless steel polished K The slide bearing of the rod ends is maintenance-free. The connection dimensions comply with DIN 648 Form Series KA. KIPP Rod ends with slide bearing external thread, stainless steel Order No. Order No. D D1 A B H H1 K L L1 α Dynamic Static Approx. right-handed thread left-handed thread base loads base loads weight kn kn kg K K M , ,5 6,2 0,013 K K M ,75 12, ,3 8,8 0,020 K K M , ,7 16,1 0,033 K K M ,5 19, ,4 25,5 0,056 K K M , ,5 0,087 K K M , ,7 60,6 0,189 K K M20x1, , ,1 83,1 0,348 K K M22x1, , ,2 99,7 0,

20 K0721 Rod ends with slide bearing internal thread, stainless steel stainless steel D H7 Casing: forged special steel Ball joint hardened and ground. Bearing shell: stainless steel polished K The slide bearing of the rod ends is maintenance-free. The connection dimensions comply with DIN 648 Form Series KJ. KIPP Rod ends with slide bearing internal thread, stainless steel Order No. Order No. D D1 D2 D3 A B B1 H H1 K L L1 SW α Dynamic Static Approx. right-handed thread left-handed thread base loads base loads weight kn kn kg 844 K K M , ,5 11,8 0,018 K K M8 12, , ,7 20,7 0,046 K K M12 17, , , ,5 0,115 K K M , ,5 19, ,4 28,3 0,076 K K M ,75 12, ,3 13,1 0,027 K K M12x1,25 17, , , ,5 0,115 K K M22x1, , ,2 99,7 0,540 K K M16x1, , ,7 60,6 0,230 K K M , ,7 60,6 0,230 K K M20x1,5 27, , ,1 83,1 0,415 K K M10x1, , ,5 19, ,4 28,3 0,076

21 K0722 Rod ends with slide bearing external thread, narrow head D Casing size (D) 6-10: free-cutting steel, turned. Casing as of size (D) 12: tempered steel, forged. Ball joint: roller bearing steel, hardened, ground, polished and hard-chromium-plated. Bearing shell: roller bearing steel with PTFE cloth glued in galvanized K The slide bearing of the rod ends is maintenance-free. The connection dimensions comply with DIN 648 Form Series E. KIPP Rod ends with slide bearing external thread, narrow head Order No. Order No. D D1 A B H H1 K L L1 α Dynamic Static Approx. right-handed thread left-handed thread base loads base loads weight kn kn kg K K ,008 M , ,6 8,2 0,016 K K ,008 M ,8 12,9 0,028 K K ,008 M ,6 17,6 0,050 K K ,008 M ,4 24,5 0,086 K K ,008 M ,190 K K ,010 M20x1, ,5 60 0,

22 K0723 Rod ends with slide bearing internal thread, narrow head D Casing size (D) 6-10: free-cutting steel, turned. Casing as of size (D) 12: tempered steel, forged. Ball joint: roller bearing steel, hardened, ground, polished and hard-chromium-plated. Bearing shell: roller bearing steel with PTFE cloth glued in galvanized K The slide bearing of the rod ends is maintenance-free. The connection dimensions comply with DIN 648 Form Series E. KIPP Rod ends with slide bearing internal thread, narrow head Order No. Order No. D D1 D2 D3 A B B1 H H1 K L L1 SW α Dynamic Static Approx. right-handed thread left-handed thread base loads base loads weight kn kn kg 846 K K ,010 M20x1,5 27, ,5 60 0,350 K K ,008 M , ,6 8,2 0,021 K K ,008 M12x1,25 17, , ,4 24,5 0,096 K K ,008 M ,280 K K ,008 M8 12, ,8 12,9 0,038 K K ,008 M , ,6 17,6 0,060 K K ,008 M10x1, , ,6 17,6 0,060 K K ,008 M12 17, , ,4 24,5 0,096

23 Notes 847

Heavy-Duty Rod Ends - Male with integral spherical plain bearing

Heavy-Duty Rod Ends - Male with integral spherical plain bearing Heavy-Duty Rod Ends - Male with integral spherical plain bearing 65700 Order No. Thread (hand) d 1 l 1 d 2 d 3 d 4 l 2 l 3 X g H7 65700.W0005 Right 5 33 M 5 11,11 18 20 9 14 65700.W0006 Right 6 36 M 6

More information

...our linkages, your solution. Rod Ends

...our linkages, your solution. Rod Ends ...our linkages, your solution Technical Information Introduction All of our rod ends incorporate either a plain spherical bearing, ball bearing, or roller bearing. Below is an overview of each type. Plain

More information

HEINRICH KIPP WERK PATAS NIVELADORAS LEVELING FEET. cesehsa.com.mx

HEINRICH KIPP WERK PATAS NIVELADORAS LEVELING FEET. cesehsa.com.mx HEINRICH KIPP WERK PATAS NIVELADORAS LEVELING FEET cesehsa.com.mx 01 800 237 3472 info@cesehsa.com.mx K0395 Leveling Pads Style A pressure foot and ball element steel Style B pressure foot and ball element

More information

Product program. Rod ends and spherical bearings. Bearings and steel balls. ASK Bearing units. ASK Product program. ASAHI Bearing units

Product program. Rod ends and spherical bearings. Bearings and steel balls. ASK Bearing units. ASK Product program. ASAHI Bearing units Product program 1 2 3 4 5 6 7 8 Rod ends and spherical bearings Bearings and steel balls ASK Bearing units ASAHI Bearing units Metric cam follower bearings Slide bushes Shaft-hub-connections Clevises and

More information

Handwheels, handles, position indicators

Handwheels, handles, position indicators Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium

More information

Piston rod attachments

Piston rod attachments Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength 629 igubal Pressfit Spherical earings The use of pivoting s is usually associated with

More information

Rod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread

Rod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel

More information

Pneumatic Angle Grinder also for Underwater Use Type

Pneumatic Angle Grinder also for Underwater Use Type M a s c h i n e n f a b r i k G m b H Pneumatic Angle Grinder also for Underwater Use Type 1 4311 0050 Illustration can differ from the original Repair Manual and Spare Parts List Compiled: 22.06.11 143110050_Inst_en_Version_00

More information

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical resistant Lightweight High strength

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical resistant Lightweight High strength igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical resistant Lightweight High strength 835 igubal igubal Pressfit Spherical earings Ease of installation makes diverse applications

More information

QUICK-ACTING JAW CHANGE SYSTEM

QUICK-ACTING JAW CHANGE SYSTEM QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire

More information

Weight approx. [kg] II39908FA BZ Part No. Type No. Type Push Rod Seal TÜV Inspection Report

Weight approx. [kg] II39908FA BZ Part No. Type No. Type Push Rod Seal TÜV Inspection Report Commercial Vehicle Systems Product DATA PD-403-200 Function This range of Brake Chambers is used on axles fitted with drum brakes. The single diaphragm cylinder provides the service brake function. In

More information

Pistons and connecting rods, disassembling and assembling

Pistons and connecting rods, disassembling and assembling Page 1 of 9 13-53 Pistons and connecting rods, disassembling and assembling 1 - Nut for connecting rod bolt 30 Nm (22 ft lb) + additional 1/4 turn (90 ) Always replace connecting rod bolt -13- Grease thread

More information

Components for parallel kinematics

Components for parallel kinematics Components for parallel kinematics Series GLK, GLAE Joints and struts form the core components of machines with parallel kinematics (PKM). Irrespective of the control technology possibilities, good mechanical

More information

MM FIXED ADJUSTABLE PLATE FIXED ADJUSTABLE RADIAL AXIAL A B C D E

MM FIXED ADJUSTABLE PLATE FIXED ADJUSTABLE RADIAL AXIAL A B C D E Hevi-Rail Roller Bearings and Linear Guideways SYSTEM MAX. STATIC COMBINED HEVI-RAIL BEARING WITH WELDED LOAD* GENERAL DIMENSIONS** BEARING FLANGE PLATE kn MM FLANGE FIXED ADJUSTABLE PLATE FIXED ADJUSTABLE

More information

FAG Angular Contact Thrust Ball Bearings double direction

FAG Angular Contact Thrust Ball Bearings double direction FAG Angular Contact Thrust Ball Bearings Basic designs Tolerances Preload Speed suitability Cage Lubrication are precision bearings with narrow tolerances. They are mainly used in precisiopindles of machine

More information

SSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)

SSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH) SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force

More information

Stirrup-shaped handles, machine handles, apparatus handles

Stirrup-shaped handles, machine handles, apparatus handles Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles

More information

CAD data. download. PRODUCT RANGE PERFECT QUALITY AND DYNAMIC

CAD data. download.   PRODUCT RANGE PERFECT QUALITY AND DYNAMIC CAD data download www.askubal.de PRODUCT RANGE PERFECT QUALITY AND DYNAMIC Imprint: This catalog has been created with adequate care and all data has been checked. All preceding issues are hereby invalid.

More information

Pneumatic Actuator. Operation & Service Manual. Models: Original Instructions UNIBLOC PUMP MANUAL NO.: REVISION: 08/2016

Pneumatic Actuator. Operation & Service Manual. Models: Original Instructions UNIBLOC PUMP MANUAL NO.: REVISION: 08/2016 Pneumatic Actuator Operation & Service Manual Models: 43004- MANUAL NO.: 43004- REVISION: 0/206 Original Instructions UNIBLOC PUMP UNIBLOC PUMP Unibloc-Pump, Inc. 0 Ashborough Road Marietta, Georgia 3006

More information

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength

igubal Pressfit Spherical Bearings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength igubal Pressfit Spherical earings Easy to fit Extremely cost-effective Chemical-resistant Light weight High strength 791 igubal Pressfit Spherical earings The use of pivoting s is usually associated with

More information

> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation

> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation Block CYLINDERS for VARIOUS DESIGN APPLICATIONS > clamping force up to 155.5 kn > operating pressure up to 500 bar > piston with internal thread > for push- and pull operation > with longitudinal and cross

More information

For applications with high axial play. For applications with reduced mounting space

For applications with high axial play. For applications with reduced mounting space Fig. Example of use Use : Pitch circle diameter Suitable for encoders Page high axial play 8.000.4K00.0000 cylindrical pin Long spring element 0 mm A020, A02H 9080, 908 262 reduced mounting space 8.000.4J00.0000

More information

> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar

> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar Vertical and link CLAMPS for DEMANDING TASKS vertical CLAMP > piston force up to 20,1 kn > operating pressure 250/350 bar > chemically nitrided body link CLAMP > piston force up to 44,0 kn > operating

More information

Needle Roller Bearings

Needle Roller Bearings Needle Roller Bearings INTERPRECISE Donath GmbH Ostring 2 90587 Obermichelbach Germany Phone +49-911-76630-0 Fax +49-911-76630-30 info@interprecise.de www.idc-bearings.com Needle roller bearings with flanges

More information

L Standard Parts for Mould Making

L Standard Parts for Mould Making A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components

More information

Sensor-Bearing Units Steer-By-Wire Modules Mast Height Control units Other sensorized units

Sensor-Bearing Units Steer-By-Wire Modules Mast Height Control units Other sensorized units Mechatronics Sensor-Bearing Units... 957 Steer-By-Wire Modules... 967 Mast Height Control units... 969 Other sensorized units... 971 955 Sensor-Bearing Units SKF Sensor-Bearing Units... 958 SKF Explorer

More information

Piston rod attachments

Piston rod attachments Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

10 Thrust ball bearings

10 Thrust ball bearings 10 Thrust ball bearings Designs and variants.............. 1010 Single direction thrust ball bearings... 1010 Double direction thrust ball bearings.. 1010 Cages............................ 1010 Bearings

More information

Ball Rail Systems RE / The Drive & Control Company

Ball Rail Systems RE / The Drive & Control Company Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems

More information

GN Telescope-Linear motion bearings

GN Telescope-Linear motion bearings GN 2410 Telescope-Linear motion bearings technical informations Specification Rail / Runner Heat treatable steel - zinc plated, blue passivated - Raceways hardened Balls Anti-friction bearing steel, hardened

More information

14 Track runner bearings

14 Track runner bearings 14 Track runner bearings Designs and variants............... 1100 Cam rollers... 1100 Single row cam rollers............. 1100 Double row cam rollers............ 1100 Support rollers... 1101 Support rollers

More information

PISTON AND CONNECTING ROD

PISTON AND CONNECTING ROD 42 02 PISTON AND CONNECTING ROD 1. No.1 compression ring 2. No.2 compression ring 3. Oil ring Description Cylinder bore diameter Piston outer diameter (D1) Clearance between bore and piston Piston cooling

More information

Rotary inlets for pressurised oil, compressed air

Rotary inlets for pressurised oil, compressed air Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040

More information

M24X

M24X Rod Ends Female Self-aligning bearing used for control linkages. Able to take tensile and compressive loads, steel on composite, complete with lubricating nipple. Body: Carbon steel S45C (C45 Din) Ball:

More information

Piston rod attachments

Piston rod attachments Piston rod attachments q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity

More information

FAG Cylindrical Roller Bearings full complement Standards Basic designs Tolerances Bearing clearance

FAG Cylindrical Roller Bearings full complement Standards Basic designs Tolerances Bearing clearance FAG Cylindrical Roller earings full complement FAG Cylindrical Roller earings full complement Standards asic designs Tolerances earing clearance Full complement cylindrical roller bearings are suitable

More information

Standard with cone bushing. Backlash-free Safety Clutch

Standard with cone bushing. Backlash-free Safety Clutch EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC

More information

B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections

B Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components

More information

igubal Pivoting Bearings igubal Pivoting Bearings Phone Fax Easy to fit Extremely cost-effective

igubal Pivoting Bearings igubal Pivoting Bearings Phone Fax Easy to fit Extremely cost-effective igubal igubal Easy to fit Extremely cost-effective Resistant to chemicals Light weight High strength 55.1 igubal Technical data igubal igus GmbH 51147 Cologne Internet www.igus.de E-mail info@igus.de The

More information

Dynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements

Dynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements 8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.

More information

SKF FAG Timken NSK NTN

SKF FAG Timken NSK NTN BEARINGS Rolling vs. Sliding Provides support for machine elements, while allowing smooth motion. µ = 0.001-0.005 Plain Bearings (Sliding/Hydrodynamic/ Journal/Sleeve) Rolling-Element Bearings Types Selection

More information

DS 0002 MOV 2014 DISTITEC Srl

DS 0002 MOV 2014 DISTITEC Srl DS 0002 MOV 2014 DISTITEC Srl The realization of this catalog occurred in tighter control of data contained therein. Due to the ongoing technical evolution of our products, we reserve the right to make

More information

Components for parallel kinematics

Components for parallel kinematics Components for parallel kinematics Series GLK, GLK 2, GLK 3 and GLAE Parallel kinematic components consist of a number of parallel, longitudinally adjustable mechanical struts that are arranged between

More information

LIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm

LIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position.   THE ultimate COUPLING from Nm LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison

More information

Cam roller guide LF6S complete axis

Cam roller guide LF6S complete axis Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

Standard Parts for Mould Making

Standard Parts for Mould Making Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves

More information

SCHMIDT-KUPPLUNG GmbH

SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung About us About us In the early 1960s Richard Schmidt developed of propulsion systems for rockets in a zero-gravity environment. Among the possible

More information

The GK units differ from the LK units in that the springs of the GK units have a spring eye at the front.

The GK units differ from the LK units in that the springs of the GK units have a spring eye at the front. 01 09 Installation guidelines Mechanical suspension units GK LK GN0032-0 Mechanical suspension units GK LK The GK units differ from the LK units in that the springs of the GK units have a spring eye at

More information

MULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings

MULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings MULTI CROSS RILLO Highly flexible tyre coupling with taper bushings Maschinenfabrik Dipl.-Ing. Herwarth Reich GmbH Vierhausstr. 53 D-44807 Bochum P.O. Box 10 20 66 D-44720 Bochum Tel.: +49 / (0)234 / 959

More information

Ballscrews. Rotating Nut ballscrews. Ballscrew X-Y retrofits for mills. Precision ground accuracy to mm/300mm. High load drive 50 to 350T

Ballscrews. Rotating Nut ballscrews. Ballscrew X-Y retrofits for mills. Precision ground accuracy to mm/300mm. High load drive 50 to 350T Ballscrews An ideal drive mechanism where constant motion or high frequency cycling is required. Ballscrews provide highly efficient transmission with low starting torque, smooth running and quiet operation.

More information

Spare parts list Pentruder Modular Drilling System

Spare parts list Pentruder Modular Drilling System Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M

More information

Spring hangers, spring supports

Spring hangers, spring supports Spring hangers, spring supports 2 spring Spring hangers, supports PRODUCT 2 GROUP Spring hangers, spring supports Contents Page Field of application...2.1 Overview of spring hangers and spring supports...2.3

More information

Piston rod attachments

Piston rod attachments Piston rod attachments Co-ordinated with Festo s cylinder range Versatile combinations Sturdy and functional Stainless steel variants 2012/09 Subject to change Internet: www.festo.com/catalogue/... 1 Piston

More information

TORQLIGHT SAFETY COUPLINGS

TORQLIGHT SAFETY COUPLINGS LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction

More information

BEARINGS The lower bearing assemble is constructed to allow continuous operation when fully submerged in wastewater.

BEARINGS The lower bearing assemble is constructed to allow continuous operation when fully submerged in wastewater. GENERAL SPECIFICATION INTENT The equipment to be supplied by manufacturer includes the screw pumps, support for the drive unit, profile plates, motors, gearboxes, couplings, guards, upper and lower bearing

More information

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings

More information

Linear Bushings and Shafts. The Drive & Control Company

Linear Bushings and Shafts. The Drive & Control Company Linear Bushings and s The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Linear Bushings R310A 3100 Linear Motion Technology Ball Rail Systems Standard Ball Rail

More information

Chuck size

Chuck size URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck

More information

Linear Bushings and Shafts

Linear Bushings and Shafts Linear Bushings and s R310EN 3100 (2004.09) The Drive & Control Company R310EN 3100 (2004.09) Linear Bushings Bosch Rexroth AG 3 Linear Bushings and s Selection Guide 9 Product Overview 10 Overall Dimensions

More information

Modular. Precise. Robust. AGE-S-XYZ Compensation Unit

Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction. Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit

More information

Subsea and industrial hydraulic manufacturers

Subsea and industrial hydraulic manufacturers Cylinders C10 & Cepac Cylinders Operating Parameters Standard cylinders Working pressure External sea pressure - Cepac subsea cylinders Temperature range Hydraulic fluid Rod speed Rec filtration 250 bar

More information

LVE - with large through-hole

LVE - with large through-hole LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable

More information

General Purpose Clutches FSO/HPI

General Purpose Clutches FSO/HPI General Purpose Clutches FSO/HPI Overrunning, Indexing, Backstopping Ball Bearing Supported, Sprag Clutches Model FSO General purpose, ball-bearing clutches suitable for overrunning, backstopping and light

More information

Basic Static Load Rating of Rolling Contact Bearings

Basic Static Load Rating of Rolling Contact Bearings Basic Static Load Rating of Rolling Contact Bearings The load carried by a non-rotating bearing is called a static load. The basic static load rating is defined as the static radial load (in case of radial

More information

Pneumatic Axial Die Grinder also for Underwater Use Type , 0050

Pneumatic Axial Die Grinder also for Underwater Use Type , 0050 M a s c h i n e n f a b r i k G m b H Pneumatic Axial Die Grinder also for Underwater Use Type 1 5077 0010 0020, 0050 Illustration can differ from the original Repair Manual and Compiled: 18.07.11 150770010_0020_0050_Inst_en_Version_00

More information

Cam roller guide LF12S complete axis

Cam roller guide LF12S complete axis Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

Installation and Operational Instructions for EAS -Compact overload clutch, Type 49_. 4._ Sizes 4 and 5

Installation and Operational Instructions for EAS -Compact overload clutch, Type 49_. 4._ Sizes 4 and 5 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents:

More information

Level indicators, screw plugs

Level indicators, screw plugs Level indicators, screw plugs 885 Product overview Level indicators, screw plugs Oil level gauges K0443 Plastic plugs K0452 Oil level gauges K0444 Page 888 Aluminium plugs K0453 Page 894 Oil level sight

More information

CRANKSHAFT REAR RADIAL SEAL

CRANKSHAFT REAR RADIAL SEAL 1B-38 CRANKSHAFT REAR RADIAL SEAL Preceding Work: Removal of flywheel or drive plate 1. Special tool 2. Special tool 3. Crankshaft rear seal Tools Required W9911 0020B (601 589 03 43 00) Crankshaft Rear

More information

DryLin R Linear Plain Bearings, Fast and Quiet

DryLin R Linear Plain Bearings, Fast and Quiet +90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum

More information

Machine elements. Pneumatic stamping unit. Toggle-lever presses

Machine elements. Pneumatic stamping unit. Toggle-lever presses Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07

More information

Technical Information

Technical Information Technical Information TI No. WL 80-48 E April 1999 Rolling Bearings FAG Mechanical Extractors Small rolling bearings with bore diameters of up to about 100 mm which have an interference fit on the shaft

More information

DryLin R Linear Plain Bearings, Fast and Quiet

DryLin R Linear Plain Bearings, Fast and Quiet +90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant

More information

Chapter 11 Rolling Contact Bearings

Chapter 11 Rolling Contact Bearings Chapter 11 Rolling Contact Bearings 1 2 Chapter Outline Bearing Types Bearing Life Bearing Load Life at Rated Reliability Bearing Survival: Reliability versus Life Relating Load, Life, and Reliability

More information

DryLin R Linear Plain Bearings, Fast and Quiet

DryLin R Linear Plain Bearings, Fast and Quiet +90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant

More information

DryLin R Linear Plain Bearings, Fast and Quiet

DryLin R Linear Plain Bearings, Fast and Quiet +90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant

More information

PRODUCTCATALOG Precision Universal Joints Telescopic Universal Joints Joint Drives and Accessories

PRODUCTCATALOG Precision Universal Joints Telescopic Universal Joints Joint Drives and Accessories PRODUCTCATALOG Precision Universal Joints Telescopic Universal Joints Joint Drives and Accessories Contents Universal joints - DIN 808-G with friction bearings 02 - DIN 808-G with friction bearings (heavy

More information

Axial-radial cylindrical roller bearings

Axial-radial cylindrical roller bearings Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller

More information

SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion.

SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. 1.1 SERVOMECH LINEAR ACTUATORS SERVOMECH linear actuators are electromechanical cylinders able to transform a rotary movement into a linear motion. Developed and manufactured for industrial applications,

More information

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

More information

Ball Screw Assemblies

Ball Screw Assemblies Ball Screw Assemblies ECO-Line The Drive & Control Company Ball Screw Assemblies Product Overview ECO-Line Ball Screw Assemblies ECO-Line Ball Screws are available from stock as complete assemblies, with

More information

LVE - with integrated pneumatic cylinder

LVE - with integrated pneumatic cylinder LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic

More information

Quarter-turn locks, compression latches

Quarter-turn locks, compression latches Quarter-turn locks, compression latches 435 K0518 Quarter-turn locks small version 2,5 13,5 4,5 SW 20 Ø20 max. 5 Ø16,2 14,2 Housing and actuator die-cast zinc. Housing and actuator chrome-plated. Wing-handle

More information

The 6-Speed Manual Gearbox 08D

The 6-Speed Manual Gearbox 08D Service. Self-Study Programme 299 The 6-Speed Manual Gearbox 08D Design and Function The Touareg is an exclusive cross country vehicle with the driving properties and driving comfort of a sporty luxury

More information

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD

Linear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17

More information

12.4 CYLINDRICAL ROLLER BEARINGS

12.4 CYLINDRICAL ROLLER BEARINGS 12.4 CYLINDRICAL ROLLER BEARINGS Cylindrical roller bearings are manufactured in many designs, dimensions and sizes. The most common designs are single row cylindrical roller bearings with cage. Single

More information

Straight Line Action Clamps

Straight Line Action Clamps Straight Line Action Clamps Sizing and Application Chart Click Page # View N [lbf.] mm [inch] Series Page MC-SLA-# 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 5000

More information

Tie rods cylinders to ISO standard

Tie rods cylinders to ISO standard Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643

More information

Output Shaft Assembly COMPONENTS

Output Shaft Assembly COMPONENTS MT140 Component Parts (Output Shaft Assembly Output Shaft Assembly COMPONENTS DISASSEMBLY OF OUTPUT SHAFT ASSEMBLY 1. REMOVE SLEEVE FROM OUTPUT SHAFT Using SST, remove the sleeve from the output shaft.

More information

Modular. Precise. Robust. AGE-S-XYZ Compensation Unit

Modular. Precise. Robust. AGE-S-XYZ Compensation Unit AGE-S Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit

More information

Flexible Couplings 44

Flexible Couplings 44 Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact

More information

CLAMP AND FLANGE COUPLINGS

CLAMP AND FLANGE COUPLINGS POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly

More information

Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48

Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48 Table of contents: Please read and observe this Operating Instruction carefully. A possible malfunction or failure of the clutch and damage may be caused by not observing it. Page 1: - Table of contents

More information

Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Table of Contents Tru-Line Flange-Couplings

More information

Pressure Compensated Flow Control Valves SRVR/SRVRP

Pressure Compensated Flow Control Valves SRVR/SRVRP Pressure Compensated Flow Control Valves /P up to 210 bar up to 160 l/min Type 1. DESCRIPTION 1.1. GENERAL flow control valves with check function are, in accordance with DIN-ISO 1219, valves for oil hydraulic

More information

Retaining ring for shaft - normal type

Retaining ring for shaft - normal type Retaining ring for shaft - normal type DIN 41 NF E22-163 BS 363-4 Technical data Nom.size shaft d1 Ring s Ring d 3 Ring d 4 Groove d 2 Groove m (H13) Groove n (min.) 3 0,4 2, 2,8 0,5 0,3 4 0,4 3, 8,6 3,8

More information

Sheet 1 Variable loading

Sheet 1 Variable loading Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.

More information

DATA PD BS7... Spring Brakes (Disc), diaphragm/diaphragm. Product. Function. Technical Features

DATA PD BS7... Spring Brakes (Disc), diaphragm/diaphragm. Product. Function. Technical Features Commercial Vehicle Systems Product DATA PD-415-200 Function This range of Spring Brakes is used on axles fitted with air disc brakes and provides the service and parking brake functions. The internal wind

More information