PRICE LIST 2017 BISON ORIGINALS EMPOWERED BY PRECISION.
|
|
- Harold Hood
- 6 years ago
- Views:
Transcription
1 PRICE LIST BISON ORIGINALS EMPOWERED BY PRECISION PRICE LIST MARCH 2017 GERARDI WORKHOLDING
2 3 Single Guide Jaws - Cast Iron Body DIN 6350 Type solid jaws - cast iron body - DIN Type reversible jaws - cast iron body - DIN Type solid jaws - cast iron body - DIN 6350 FRONTAL MOUNTING Type reversible jaws - cast iron body - DIN 6350 FRONTAL MOUNTING Type reversible jaws - cast iron body - DIN /18
3 3 Single Guide Jaws - Steel Body DIN 6350 Type solid jaws - steel body - DIN Type 3504P (HIGH PRECISION) 3 solid jaws - steel body DIN P P P P P P P P P P P P Type reversible jaws - steel body - DIN 6350 BACK Type 3505-P (HIGH PRECISION) 3 reversible jaws - steel body - DIN 6350 BACK P P P P P P P P P P /18
4 3 Single Guide Jaws - Steel Body DIN 6350 Type solid jaws - steel body - DIN 6350 FRONTAL MOUNTING Type reversible jaws - steel body - DIN 6350 FRONTAL MOUNTING Type solid jaws - steel body FRONT. MOUNTING fine adjustment by screws Type 3565 fine adjustment by screws 3 reversible jaws - steel body FRONT. MOUNTING /18
5 4 Single Guide Jaws - Cast Iron Body DIN 6350 Type solid jaws - cast iron body - DIN Type reversible jaws- cast iron body - DIN Type solid jaws - cast iron body - DIN 6350 FRONTAL MOUNTING Type reversible jaws - cast iron body - DIN 6350 FRONTAL MOUNTING Single Guide Jaws - Cast Iron Body - DIN 6350 Type solid jaws - steel body - DIN Type reversible jaws - steel body - DIN /18
6 3 Single Guide Jaws - Cast Iron Body - DIN Type solid jaws - cast iron body - DIN DIRECTLY MOUNTING CAMLOCK TYPE / / / /5; /6; /8; /6;12. 1/ /8;12. 1/ /11;12. 1/ /6;15. 3/ /8;15. 3/ /11;15. 3/ Type solid jaws - cast iron body - DIN DIRECTLY MOUNTING CAMLOCK TYPE / / / / / / / / / / / / / Single Guide Jaws - DIN Type solid jaws - steel body - DIN DIRECTLY MOUNTING CAMLOCK TYPE / / / / / / / / / / / / / / / / / Type reversible jaws - steel body - DIN DIRECTLY MOUNTING CAMLOCK TYPE / / / / / / / / / / / / / / / / / /18
7 3 Single Guide Jaws - Steel Body DIN Type solid jaws - steel body - DIN DIRECTLY MOUNTING ON TYPE A MACHINE / / / / / / / / / / Type reversible jaws - steel body - DIN DIRECTLY MOUNTING ON TYPE A MACHINE / / / / / / / / / / Single Guide Jaws - DIN Type solid jaws - cast iron body - DIN DIRECTLY MOUNTING BAYONET TYPE / / / / / / / / / / Type griffe integrali - steel body - DIN DIRECTLY MOUNTING BAYONET TYPE / / / / / / / / / / / / / Single Guide Jaws - Steel Body Type 3864 (SUPERIOR ACCURACY) 6 solid jaws - steel body FRONT. MOUNTING fine adjustment by screws Type 3865 (SUPERIOR ACCURACY) 6 reversible jaws - steel body FRONT. MOUNTING fine adjustment by screws /18
8 4 Single Guide Jaws - DIN / 27 / 29 Type solid jaws - cast iron body - DIN DIRECTLY MOUNTING ON TYPE A MACHINE / / / / / / / / / / / / / / / /11 - Type solid jaws - cast iron body - DIN DIRECTLY MOUNTING BAYONET TYPE / / / / / / / / / / / /11 - Type solid jaws - steel body - DIN DIRECTLY MOUNTING BAYONET TYPE / / / / / / / / / / / / Type solid jaws - cast iron body - DIN DIRECTLY MOUNTING BAYONET TYPE / / / / / / / / / / / /11 - Type solid jaws - steel body - DIN DIRECTLY MOUNTING BAYONET TYPE / / / / / / / / / / / / /18
9 Lathe Chucks SPARE PARTS Hard Inside Jaws x 3200/ Pieces set SJW 3500; SJW 3500; SJW 3500; SJW 3500; SJW 3500; SJW 3500; SJW 3500; SJW 3500; SJW SJW SJW SJW Hard Outside Jaws x 3200/ Pieces set SJZ 3500; SJZ 3500; SJZ 3500; SJZ 3500; SJZ 3500; SJZ 3500; SJZ 3500; SJZ 3500; SJZ SJZ SJZ SJZ Hard Masters Jaws x 3200/ Pieces set SP 3500; SP 3500; SP 3500; SP 3500; SP 3500; SP 3500; SP SP SP Hard Reversible Jaws x 3200/ Pieces set SGT 3500; ;5 139 SGT 3500; ;6 170 SGT 3500; ;8 171 SGT 3500; ; SGT 3500; ; SGT 3500; ; SGT 3500;500;20 - SGT 3500; ;25 - Soft top Jaws x 3200/ Pieces set SGM 3200; KPL 63 SGM 3200; KPL 70 SGM 3200; KPL 72 SGM 3200; KPL 94 SGM 3200; KPL 127 SGM 3200; KPL 173 SGM ;20 KPL 98 SGM ;800KPL 319 Soft Solid Jaws 3200/ Pieces set SJM 3500; SJM 3500; SJM 3500; SJM 3500; SJM 3500; SJM 3500; SJM 3500; SJM 3500; SJM SJM SJM SJM /18
10 Lathe Chucks Spare Parts Hard Inside Jaws x 3600/ Pieces set SJW SJW 3600; SJW 3600; SJW 3600; ;8 - SJW 3600; SJW 3600; SJW 3600; SJW SJW Hard Outside Jaws x 3600/ Pieces set SJZ SJZ 3600; SJZ 3600; SJZ 3600; SJZ 3600; SJZ 3600; SJZ 3600; SJZ SJZ SJZ Hard Masters Jaws x 3600/ Pieces set SP 3600; SP 3500; SP 3600; SP 3600; SP 3600; SP 3600; SP SP SP Hard Reversible Jaws x 3600/ Pieces set SGT 3600; SGT 3500; SGT 3600; SGT 3600; SGT 3600; SGT 3600; SGT SGT SGT SGT Soft Top Jaws x 3600/ Pieces set SGM 3600; KPL 77 SGM 3600; KPL 95 SGM 3600; KPL 94 SGM 3600; KPL 137 SGM 3600; KPL 169 SGM 3600; KPL 230 SGM 3600;500 KPL 324 SGM 3600;630;800 KPL 425 Soft Solid Jaws x 3600/ Pieces set SJM SJM 3600; SJM 3600; SJM 3600; SJM 3600; SJM 3600; SJM SJM SJM SJM SJM /18
11 Lathe Chucks Spare Parts Pinion x 3200/3500/3600/3700 KZ 3200; KZ 3200; KZ 3200; KZ 3200;3100; KZ 3200;3100; KZ 3200;3100; KZ 3200;3100; KZ 3200;3100; KZ 3200; KZ 3200; KZ Scroll Plate x 3200/3500/3600 TZ TZ TZ 3200; TZ 3200; TZ 3200; TZ 3200; TZ 3200; TZ 3200; TZ 3200; TZ TZ KZ KZ KZ KZ KZ KZ KZ 3560; KZ 3560; Scroll Plate x 3500/3700/3800 TZ 3500;3700; TZ 3500;3700; TZ 3500;3700; TZ 3500;3700; TZ 3500;3700; TZ 3500;3700; TZ 3500;3700; TZ 3500;3700; TZ 3500;3700; TZ 3500;3700; /18
12 Lathe Chucks SPARE PARTS Mounting Bolt DIN TN C3 (M10x34) 11 TN C4 (M10x39) 12 TN C5 (M10x43) 12 TN C6 (M12x50) 14 TN C8 (M16x60) 17 TN C11 (M20x75) 24 TN C15 (M24x90) 59 Stud For CAMLOCK DIN KK M 10 x KK M 10 x KK M 12 x KK M 16 x 1, KK M 20 x 1,5-55,5 30 KK M 22 x 1, KK M 24 x 1, KK M 27 x Soft Top Jaws x pieces set SGM KPL 51 SGM KPL 51 SGM KPL 74 SGM KPL 101 SGM KPL 169 Soft Top Jaws x pieces set SGM RHU 51 SGM RHU 63 SGM RHU 66 SGM RHU 96 SGM RHU 146 Hard Master Jaws x pieces set SP SP SP SP SP Hard Master Jaws x pieces set SP RHU 222 SP RHU 204 SP RHU 255 SP RHU 293 SP RHU 484 Safefy Wrench KL 3200; ; KL 3200; ; KL 3200; ; KL 3200; ; KL 3200; KL ; KL /18
13 Independents and Self-Centering (COMBS) Type 4505 COMBS 3 reversible jaws - cast iron body - DIN Type 4705 COMBS 3 reversible jaws - steel body - DIN Type 4605 COMBS 4 reversible jaws - cast iron body - DIN Type 4805 COMBS 4 reversible jaws - steel body - DIN Additional Optional Jaws Soft Jaws for COMB x 4505/ pieces set SJM 4505; SJM 4505; SJM 4505; SJM 4505; SJM 4505; SJM 4505; Soft Jaws for COMB x 4605/ pieces set SJM 4605; SJM 4605; SJM 4605; SJM 4605; SJM 4605; SJM 4605; /18
14 Independent Chucks Type 4304 INDEPENDENT CHUCKS 4 independent jaws - cast iron (steel*) DIN Type 4305 INDEPENDENT CHUCKS 4 independent jaws - cast iron body DIN Type 4334 INDEPENDENT CHUCKS 4 independent jaws - cast iron body DIN DIRECTLY MOUNTING ON BAYONET TYPE / / / / / / / / / / / / / / / / / / / / Type 4314 INDEPENDENT CHUCKS 4 independent jaws - cast iron body DIN DIRECTLY MOUNTING ON TYPE A MACHINE / / / / / / / / / / / / / /11 DIN / / / / / Type 4344 INDEPENDENT CHUCKS 4 independent jaws - cast iron body DIN DIRECTLY MOUNTING CAMLOCK TYPE /3;6. 1/ /3; /4; /5; /3; /4; /5; /6; /8; /5;12 1/ /6;12 1/ /8;12 1/ /6;15 3/ /8;15 3/ /11;15. 3/ /8; /11; /8; /11; /11;31.1/ /15;31.1/ /18
15 Independent Chucks SPARE PARTS Hard Master Jaws x pieces set SP SP SP SP SP SP SP SP ;1000; Hard Jaws x pieces set SGT KPL - SGT KPL - SGT KPL - SGT KPL 871 SGT KPL 971 SGT KPL - SGT 4303;5-915x SJ ;160 SJ SJ SJ ;350 SJ SJ SJ SJ SJ ;1250 Hard reversible Jaws x pieces set - Soft SOlid Jaw x pieces set SJM SJM SJM SJM SJM SJM SJM Safety Wrench x 4300 Operating Screw x 4300 KL ;150; SS KL ;250 - SS KL ;350;400 - SS KL ; SS KL SS SS SS SS ;36 SS ;39-3/8 SS ;49 15/18
16 DOUBLE GUIDE Lathe Chucks Type solid jaws DIN Type solid jaws DIN Type 3203 Type reversible jaws - DIN reversible jaws - DIN Additional Optional Jaws Hard Master Jaws x 3202 DOUBLE GUIDE 3 pieces set SP SP SP SP SP SP SP SGM Soft top jaws x 3200/3500 as single guide (Pg. 7/16) 3 pieces set Hard Master Jaws x 3602 DOUBLE GUIDE 4 pieces set SP SP SP SP SP SP SP SGM Soft top jaws x 3600/3700 as single guide (Pg. 8/16) 4 pieces set 16/18
17 Additional Optional Jaws Solid Soft Jaws DOUBLE GUIDE 3 pieces set SJM SJM SJM SJM SJM SJM SJM Solid Soft Jaws DOUBLE GUIDE 4 pieces set SJM SJM SJM SJM SJM SJM SJM DOUBLE GUIDE Jaws (SPARE PARTS) Hard Outside Jaws DOPPIA GUIDA 3 pieces set SJZ SJZ SJZ SJZ SJZ SJZ SJZ Hard Outside Jaws DOUBLE GUIDE 4 pieces set SJZ SJZ SJZ SJZ SJZ SJZ SJZ Hard Inside Jaws DOUBLE GUIDE 3 pieces set SJW SJW SJW SJW SJW SJW SJW Hard Inside Jaws DOUBLE GUIDE 4 pieces set SJW SJW SJW SJW SJW SJW SJW SGT Hard Reversible Jaws x 3200/3500 as single guide (Pg. 7/16) 3 pieces set SGT Hard Reversible Jaws x 3600/3700 as single guide (Pg. 8/16) 4 pieces set 17/18
18 CAMLOCK Adapter Plates Type 8240 Adapter plates for DIN SEMI-FINISHED (with oversteel on the machine side) / / / / / / / / / / / / / / / / / / / / / / / / /15 - Type 8240-X Adapter plates for DIN FULLY-FINISHED /3-X /4-X /3-X /4-X /5-X /3-X /4-X /5-X /6-X /5-X /6-X /8-X /6-X /8-X /6-X /8-X /11-X /8-X /11-X /8-X /11-X /8-X /11-X /15-X /11-X /15-X - Type 8242 Adapter plates for DIN ROUGH ON THE CHUCK SIDE / / / / / / / / / / / / / / / / / / / /15-18/18
19 BAIONET ADAPTER Plates Type 8230 Adapter plates for DIN SEMI-FINISHED (with oversteel on the machine side) / / / / / / / / / / / / / / / / / /15 - Type 8232 Adapter plates for DIN ROUGH ON THE CHUCK SIDE / / / / / / / / / / / / / / / / /15 - Type 8230-X Adapter plates for DIN FULLY-FINISHED /3-X /4-X /3-X /4-X /5-X /6-X /4-X /5-X /6-X /6-X /8-X /6-X /8-X /11-X /6-X /8-X /11-X /8-X /11-X /15-X /11-X /15-X /11-X /15X - ASA Adapter Plates Type 8210 Adapter plates for DIN FULLY-FINISHED (with oversteel on the machine side) / /11 DIN / / /11 - Type 8210-X Adapter plates for DIN FULLY-FINISHED /6-X /8-X /11-X /8-X /11-X /15-X /8-X /11-X /15-X /18
20 Discover our WORKHOLDING and TOOLING su Price List #14 / 2017 Price list #02-1 st Edition 1015 Lonate Pozzolo (VA) Italy Tel Fax gerardi@gerardispa.com - WORKHOLDING PRICE LIST # # WORKHOLDING PRICE LIST / JANUARY GENNAIO JANUARY 2016 TOOLING PRICE LIST TESTE ANGOLARI - MOLTIPLICATORI DI GIRI - MOTORIZZATI - STATICI - PINZE / ANGLE HEADS - SPINDLE SPEEDERS - DRIVEN TOOLS - STATIC TOOLS - COLLETS # Price List #14-1 st Edition Italian Sales Agents Price List #14-1 st Edition LOMBARDIA / PIEMONTE / LIGURIA MARCO LUONI CASSANO MAGNAGO Tel marcoluoni@gerardispa.com FRIULI VENEZIA GIULIA / VENETO / TRENTINO ALTO ADIGE MAURO CAPOVIN ZANE (VI) Tel maurocapovin@interfree.it EMILIA ROMAGNA SAN MARINO e TOSCANA ALBERTO ZANOTTI ANZOLA EMILIA (BO) Tel albertoz@zanottirappresentanze.it Distributore: GERARDI SPA via Giovanni XXIII, LONATE POZZOLO (VA) Italia Tel Fax gerardi@gerardispa.com Feb 2017
BEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More information4WY 4 WATER FILLED SUBMERSIBLE MOTORS
4 WATER FILLED SUBMERSIBLE MOTORS TECHNICAL CHARACTERISTICS Hermetically sealed stator with epoxy resin able to guarantee better electrical insulation and provide the high efficecy heat dissipation Rotor
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationDWC CLOSED IMPELLER CENTRIFUGAL ELECTRIC PUMPS. 60 Hz
60 Hz in AISI 304 Closed impeller centrifugal electric pumps in AISI 304 stainless steel. APPLICATIONS Supply of drinking water Domestic pressure boosting Small-scale garden irrigation Emptying reservoirs
More informationEUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER
EUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER TMX Power s Featuring the quality and precision associated with European manufacturing, TMX Power s are direct,
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationGeared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationCDA DUAL IMPELLER CENTRIFUGAL ELECTRIC PUMPS. 60 Hz
60 Hz in cast iron Cast iron dual impeller centrifugal electric pumps, APPLICATIONS Pressure boosting domestic plants Small-sale irrigation Moving non-aggressive liquids for civil and industrial use Washing
More information3D SERIES CENTRIFUGAL PUMPS CLOSE COUPLED AND STANDARDIZED EN Hz
CENTRIFUGAL PUMPS CLOSE COUPLED AND STANDARDIZED EN733 60 Hz Centrifugal pumps close coupled (3D) and standardized EN 733 (3DS- 3DP) in cast iron. APPLICATIONS Water and clean liquids not chemically aggressive
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationCVM VERTICAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS. 60 Hz
60 Hz Cast iron vertical multistage centrifugal electric pumps. APPLICATIONS Pressure boosting plants General pressure increases Irrigation Washing plants Moving clean water TECHNICAL DETAILS Reliable
More informationCollet Chuck manual 08/2010
Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationThe experience of feed in tariff in Italy. Results so far and middle term forecasts.
The experience of feed in tariff in Italy. Results so far and middle term forecasts. Gerardo Montanino Director of Operations Department 23rd European Photovoltaic Solar Energy Conference and Exhibition
More informationIDROGO 5 SUBMERSED CENTRIFUGAL ELECTRIC PUMP. 60 Hz
5 SUBMERSED CENTRIFUGAL ELECTRIC PUMP 60 Hz 5 submersed multistage centrifugal electric pumps. APPLICATIONS Moving clear water from wells, cisterns and primary collection reservoirs Pressure boosting domestic
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationJESX - JEX SELF-PRIMING ELECTRIC PUMPS
60 Hz Self-priming electric pumps stainless steel. APPLICATIONS Supply of drinking water Domestic pressure boosting Small-scale garden irrigation Emptying reservoirs and swimming pools Moving clean water
More information(855-TMX-CHCK)
855-869-2425 (855-TMX-CHCK) www.tmxworkholding.com Dear Valued ners, We have broadened our line of TMX products the manufacturing world is changing and you need products designed and engineered to exceed
More informationEgo HIGH PERFORMANCE ELECTRONIC CIRCULATORS
Ego HIGH PERFORMANCE ELECTRONIC CIRCULATORS Ego Range HIGH PERFORMANCE ELECTRONIC CIRCULATORS in cast iron with cataphoresis coating GENERAL FEATURES Ego is a cutting-edge range of electronic circulators
More informationPOWER CHUCKS KTN / KTG / KS
POWER CHUCKS KTN / KTG / KS This catalogue features details of the range of FORKRT KT and KS power chucks. Should you require further information beyond the data contained in this catalogue, please refer
More informationESSENTIAL. Valves. EL series. 18 mm - G1/8 22 mm - G1/4 PNEUMATIC AUTOMATION
ESSENTIAL Valves EL series 18 mm - G1/8 22 mm - G1/4 PNEUMATIC AUTOMATION ESSENTIAL Valves EL series 18 mm (G1/8) 22 mm (G1/4) HIGH FLOW RATE 800 Nl/min (G1/8) 1700 Nl/min (G1/4) REDUCED DIMENSIONS 18
More informationE-drive FREQUENCY INVERTER FOR THE CONTROL OF ELECTRIC PUMPS. 50/60 Hz
E-drive FREQUENCY INVERTER FOR THE CONTROL OF ELECTRIC PUMPS 50/60 Hz The E-drive is a device for the control and protection of pumping systems based on frequency variations in the power supply of the
More informationEgo HIGH PERFORMANCE ELECTRONIC CIRCULATORS
HIGH PERFORMANCE ELECTRONIC CIRCULATORS HIGH PERFORMANCE ELECTRONIC CIRCULATORS in cast iron GENERAL FEATURES Ego is a cutting-edge range of electronic circulators that fully comply with European Directive
More informationPower Chucks B & BT Series
Power Chucks B & BT Series B Series Three-jaw and two-jaw wedge style power chucks are ideal for high speed chucking, bar chucking and universal machining. These deliver consistent accuracy and repetitive
More informationELECTRIC PUMPS FOR RESIDENTIAL USE. 50 Hz
ELECTRIC PUMPS FOR RESIDENTIAL USE 50 Hz EBARA Pumps Europe network Head Office EBARA Pumps Europe S.p.A. Via Pacinotti, 32 36040 Brendola (VI), Italy Phone +39 0444 706811 - Fax +39 0444 405811 Italian
More informationCNPA. 50 Hz. EBARA Corporation. EBARA Pumps Europe network. Head Office
FIRE-FIGHTING SETS with Split-case pumps 50 Hz EBARA Pumps Europe network Head Office Italian Sales Network Export Network EBARA Pumps Europe S.p.A. Via Pacinotti, 3 36040 Brendola (VI), Italy Phone +39
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationFNC Power Chucks with Quick Change Jaw System
260.10.05 E 10/05 FNC Power Chucks with Quick Change Jaw System This catalogue describes all components of the FNC universal, quick jaw change, power chucking system. Should you require further information
More informationHG-F. Quick jaw change ma JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
Quick jaw change ma JAWS SYSTEM FORKARDT For highest speeds Flat gripping force curve 18 16 315 Mdmax. Jaw change in less than 1 minute F G total gripping force (3 jaws) (kn) 14 12 1 8 6 4 2 26 21 16 26
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationHG-F JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
SYSTEM FORKARDT JAWS Quick jaw change ma For highest speeds Flat gripping force curve 18 315 16 Mdmax. FG Jaw change in less than 1 minute FG total gripping force (3 jaws) (kn) 14 26 12 1 8 21 6 16 4 2
More information2016 Lathe Workholding Pricing
2016 Lathe Workholding Pricing LMC Chucks, Cylinders & Steady Rests *Prices are subject to change without prior notice Logansport Facility Resources & Capabilities LMC Workholding is the present entity
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationConstant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM <1.4HP / 1.04kW
Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM
More informationLVE - with integrated cylinder
LVE - with integrated cylinder Technical features: Wedge system with integrated clamping cylinder Large through-hole Scope of delivery: Chuck and jaw mounting screws, T-nuts (without top jaws) Unobstructed
More informationCONVENTIONAL WORKHOLDING
simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LATHE CHUCKS INDEPENDENT CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and
More informationBevel gearboxes. Catalogue
Bevel gearboxes Catalogue INDEX Bevel gearbox description... page 2 Manufacturing features... page 2 Materials and components... page 4 Bevel gearbox selection... page 5 Thermal power limit... page 7
More informationSPECIAL. OFFER # LIST PRICE REDUCTION UP TO 40%
www.gerardi.it OFFER #0-017 EXPIRES 31st of December 017 PRICE REDUCTION UP TO % StandardFLEX Innovative comb system for quick pull-down jaw plates change! 5% W5 FIVE YERS RRN TY *X StandardFLEX precision
More informationEgo HIGH EFFICIENCY ELECTRONIC CIRCULATORS. 50 Hz
HIGH EFFICIENCY ELECTRONIC CIRCULATORS 50 Hz ELECTRONIC VARIABLE SPEED CIRCULATORS (single and twin types) ErP ready New range of electronically-controlled circulators with permanent magnet rotors. Ego
More informationROYAL LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
ROYAL LOW-PROFILE ACCU-LENGTH High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because they are
More informationKFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
More informationSSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)
SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force
More information& TOOLING 2016 WORKHOLDING U.S. GERARDI USA LLC - HUNTLEY - CHICAGO, IL. Inside:
www.gerardiusa.com U.S Inside: WORKHOLDING & TOOLING 2016 GERRDI US LLC - HUNTLEY - CHICGO, IL HRDENED ND GROUND STEEL HRC 60 - CCURCY WITHIN 0.0008" STD & StdFLEX VISES FMS VISES MULTIFLEX VISES MULTITSKING
More informationBio-districts, a rising reality: The experience of the Cilento Bio-District
International Network of Eco Regions Bio-districts, a rising reality: The experience of the Cilento Bio-District Roma Tre University, 11 th May 2017 FARMERS They produce organic and are perfectly integrated
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationCompany profile for wheels production HEELS PRODUCTION MADE IN ITALY
Company profile for wheels production HEELS PRODUCTION w w w. i m t i n t e r m a t o. i t 3 1983 Production of vertical turning lathes for the machining of allumium light alloy wheels begins. 1987 Introduction
More informationHarken limited worldwide warranty - Ordering spare parts
Harken limited worldwide warranty - Ordering spare parts Harken limited worldwide warranty Refer to the Harken Limited Worldwide Warranty in the Harken Catalogue and on the website www.harken.com Ordering
More informationTQ series. Low-backlash gearboxes
TQ series Low-backlash gearboxes SUMMARY 1 General information... 1.1 Symbols, units and definitions... 1.2 Selecting the gear unit... 4 1. Service life of bearings... 6 2 Features of TQ series... 8 Ordering
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationCollet Chucks for 5C / 16C / 3J Collets
Precision Workholding Technology ollet hucks for 5 / 16 / 3J ollets 5W Wide Opening ollet hucks www..com 5-ND Dead Length ollet hucks huck Features Dead length design with reduced nose for full size machines
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
Alberti LIVE TOOLS 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Alberti
More informationConventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 20 D. Universal lathes with toolmaking precision for industrial applications
Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 2 D Universal lathes with toolmaking precision for industrial applications EMCOMAT 14 S/14 D EMCOMAT 17S/17D/2D The Technology The EMCOMAT 14 S/14
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More information3-Jaw Closed-Center Chuck (381mm mm)
HC 3-Jaw Closed-Center Chuck (381mm - 1000mm) Application / Benefits Ideal for vertical lathes and work that does not require a through-hole Large sizes offered for large work Technical features Wedge
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationELECTRIC POWER TOOLS SIM180
New Products ELECTRIC POWER TOOLS SIM180 7 Polisher SIM115 4 1 / 2 Angle Grinder Voltage - 230v Frequency - 50hz Rated Power - 1300w Electronic Speed Control Maintains Constant Speed Under Load Soft Start,
More informationDRILL CHUCKS-KEY TYPE
HUK JWS LTHE WORKHOLDING MHINE VISES RETENTION KNOS ER, D, TG OLLETS INDEXLE DRILLS TURNING & ORING TPS & REMERS RSIVES MESURING TOOLS MRO & SFETY FLT STOK/DRILL ROD DRILL HUKS-KEY TYPE LL ERING HUKS all
More information3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks
3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks This catalogue describes the key components of a power chucking system featuring the following FORKARDT power chucks: QLC, QLK,
More informationDescription and operating instructions. TOUCHDEX indexing tables
TOUCHDEX Automatic mechanical indexing tables Description and operating instructions Pag.. 3 TOUCHDEX indexing tables Pag.. 8 COMBIDEX Pag.. 12 TILTING Pag.. 13 MULTIDEX Pag.. 14 Accessories Pag.. On our
More informationKFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More information8 Sizes of Body Equal Pitch & Un-Equal Pitch. 7 Insert Grades 3 Types of Chip Breaker. No. 332
8 Sizes of Body Equal Pitch & Un-Equal Pitch 7 Insert Grades 3 Types of Chip Breaker No. 332 AFE45 Face Mill Q max High Efficient Jet Air Hole Roughing Semi-Finishing HRC 60 No. of Teeth 4 14 d 2 d 2 d
More informationContent. SU series. SU series. SL series. ST series. ST series. PC series. PC series. SC series ZTD03/04/05 SPGT WCMX KONDA TOOLS.
KONDA TOOS Twist drills Content SU series 0 SU series 0 04 S series 04 ST series ST series 04 Straight flute drills 0 PC series 0 PC series 0 SC series Shallow drills ZTD0/04/0 0 07 01 WCMX KONDA TOOS
More informationSUBMERSIBLE WELL ELECTRIC PUMPS. 50 Hz
SUBMERSIBLE WELL ELECTRIC PUMPS 50 Hz EBARA Pumps Europe network He a d Office EBARA Pumps Europe S.p.A. Via Pacinotti, 32 36040 Brendola (VI), Italy Phone +39 0444 706811 - Fax +39 0444 405811 Italian
More information2015 www.vigor-equipment.com EN-DINAR Valid until March 1, 2015 Socket Set V74, EAN 40477280741 c L M N 6 2 2 X Design i size 12 x A c 6 4 4.5 5 5.5 6 7 8 9 10 11 12 1 2 x L L F PH 1 PH 2 2 x L M F PZ
More informationKFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East Windsor,
More informationromi VT 1400 romi VT 2000 romi VT 2500 romi VT 3000 romi VT 5000 romi VT 6000 VerTiCAL CNC LATHeS Romi VT SerieS
ROMI VT 1400 ROMI VT 2000 ROMI VT 2500 ROMI VT 3000 ROMI VT 5000 ROMI VT 6000 VERTICAL CNC LATHES Romi VT Series ROMI Industrial Complex, in Santa Bárbara d Oeste - SP, Brazil INNOVATION + QUALITY ROMI:
More informationCMZ Machinery Group, S.A.
High perfomance from within TA 15 TA 20 TA 25 TA 30 TA 15M TA 20M TA 25M TA 30M TA 15S TA 20S TA 25S TA 30S TA 15MS TA 20MS TA 25MS TA 30MS TA 15Y TA 20Y TA 25Y TA 30Y TA 15YS TA 20YS TA 25YS TA 30YS Excellent
More informationCOLOMBO FILIPPETTI SPA
PARALLEL OSCILLATING DRIVES CF3 COLOMBO FILIPPETTI SPA HEAVY-DUTY SERIES 165P 200P 250P 315P LA MECCANICA RAZIONALE Via Rossini, 26-24040 CASIRATE D'ADDA [BG] - ITALY - TEL.0363/3251 - TELEFAX 0363/325252
More informationTaps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
More informationDURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
More informationTOOLS THAT WORK WITH YOU
TOOLS THAT WORK WITH YOU JAVELIN FABRICATION TOOLS EDITION 18 Easy to use, well designed and they last forever. That s how I would describe the Javelin stands and rollers. I have had the same stands for
More informationAir vane motors for special applications
Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationHigh Speed Jet Spindle
1/28 High Speed Jet Spindle 2/28 High speed jet spindle TaeguTec has launched a revolutionary new high-speed spindle developed for applications using high RPM for small diameter tools that can be used
More informationPneumatic Actuator. Operation & Service Manual. Models: Original Instructions UNIBLOC PUMP MANUAL NO.: REVISION: 08/2016
Pneumatic Actuator Operation & Service Manual Models: 43004- MANUAL NO.: 43004- REVISION: 0/206 Original Instructions UNIBLOC PUMP UNIBLOC PUMP Unibloc-Pump, Inc. 0 Ashborough Road Marietta, Georgia 3006
More informationMonthly Report on the Electricity System
September 218 Monthly Report on the Electricity System September 218 Monthly Report on the Electricity System page 5 The Focus of this month provides a summary of the analysis of the 217 statistical data
More informationIDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More informationFlight Operations (HEMS/SAR HHO, Aerial work, firefighting, commercial air transport)
Airgreen offers complete services using the helicopters: Flight Operations (HEMS/SAR HHO, Aerial work, firefighting, commercial air transport) Maintenance Training for pilots, for maintenance technicians
More informationCollet Closers 101
www.lexairinc.com Ph: 859-255-5001 Fax: 859-255-6656 Collet Closers 101 What they are, how they work, what it takes to make them function. Lexair is a privately held, American owned corporation committed
More informationnanoflex Designed for Swiss Type Lathes The new quick change system with very compact design and very high precision.
The new quick change system with very compact design and very high precision. Minimal investment, maximal expandability. Designed for Swiss Type Lathes The perfect combination: ER collet chuck and modular
More information