LVE - with integrated cylinder
|
|
- Berenice Richard
- 5 years ago
- Views:
Transcription
1 LVE - with integrated cylinder Technical features: Wedge system with integrated clamping cylinder Large through-hole Scope of delivery: Chuck and jaw mounting screws, T-nuts (without top jaws) Unobstructed bore throughout spindle thanks to omission of draw tube Self-contained High gripping force even at 6 bar Chucking and unchucking only while spindle is not rotating Suitable for machining flanges and bar stock and for chucking pipes Used in conjunction with RÖHM actuating cylinders with safety device SZS, OVS, LHS-L, LVS, EHS and EVS the power chucks LVE meet the requirements of the German Employers Insurance Association Technical features: 2 3 Compressed air is supplied to one of the piston spaces through the immobilezed floating ring 1 and the double non-return valve. The force acting on the pressure piston 2 is transmitted to the base jaws 4 by the chucking piston via the proven wedge system 3. During chucking and unchucking, special seals 5 seal the floating ring 1 against the body 6. On completion of the chucking operation, the chucking pressure is maintained by the nonreturn valve with no pressure existing in the supply lines. The seals rise by their elasticity and are not destroyed through the rotating chuck body. With the QR Code you have direct access to our product videos on Youtube. Components: 1. Floating ring 2. Pressure piston 3. Wedge system 4. Base jaws 5. Special seals 6. Body 6196
2 LVE up to 10 bar, with serration 90, cylindrical centre mount Type jaw self-contained chucks LVE, with through-hole, max. operating pressure 10 bar, with serration cylindrical centre mount Size A Jaw travel B 3 4,2 4,2 5 5 C 101,5 130, ,5 DH E 6 6,5 6,5 6,5 6,5 F G M 8 M 10 M 10 M 10 M 10 H J K L M 6 M 6 M 6 M 6 M 16 M N 66,5 80, ,5 79,5 O P R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R M 8 M 8 M 12 M 16 M 6 S T , ,5 158 U, V ,5 25 a min ,8 41, ,5 a max , ,5 b min ,5 b max , c min. 14 / max x d 41 49, e f H Max. operating Min. operating 2 2,5 2,5 2,5 2,5 Total clamping force at 6 bar kn Max. admissible speed min Moment of inertia J kgm 2 0,028 0,125 0,262 0,675 1,35 Air consumption/jaw travel at 6 1,5 3,6 6,1 9,9 12,3 bar NL Weight without jaws approx. kg A stationary fastening of the floating ring allows higher speeds from stock 4-6 weeks on request 6197
3 LVE up to 10 bar, with serration 90, ISO Type jaw self-contained chucks LVE, with through-hole, max. operating pressure 10 bar, with serration 90 Short taper mount ISO (DIN 55027,studs and locknuts) Size Short-taper A Jaw travel B 3 3 4,2 4,2 4,2 4,2 4,2 4, C 108, ,5 145, D 63,513 82,563 63,513 82, ,375 82, , , , , , , , ,869 E F , ,8 133,4 104,8 133,4 171,4 133,4 171, ,4 171,4 235 G 3xM10 4xM10 3xM10 4xM10 4xM12 4xM10 4xM12 4xM16 4xM12 4xM16 6xM 4xM12 4xM16 6xM H J K L M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M N 66,5 66,5 80,5 80,5 80, ,5 78,5 78,5 79,5 79,5 79,5 O P R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R M 8 M 8 M 8 M 8 M 8 M 12 M 12 M 12 M 16 M 16 M 16 M 16 M 16 M 16 S T ,5 139,5 139, ,5 158,5 160,5 167,5 167,5 169,5 U,7,7, V 7 9, ,5 23,5 24,5 26,5 26,5 26,5 28,5 34,5 34,5 36,5 a min ,8 31,8 31,8 41,2 41,2 41, ,5 61,5 61,5 a max ,4 45,4 45, ,5 66,5 66,5 b min ,5 14,5 14,5 b max ,5 19,5 19, c min 14 / min 14 / 2 x 15 2 x 15 2 x max 25 max 25 d ,5 49,5 49, e f H Max. operating Min. operating 2 2 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 Total clamping force at 6 bar kn Max. admissible speed min -1 Moment of inertia J kgm 2 0,028 0,028 0,125 0,125 0,125 0,262 0,262 0,262 0,675 0,675 0,675 1,35 1,35 1,35 Air consumption/ jaw travel at 6 bar NL Weight without jaws approx. kg 1,5 1,5 3,6 3,6 3,6 6,1 6,1 6,1 9,9 9,9 9,9 12,3 12,3 12, A stationary fastening of the floating ring allows higher speeds 6198 from stock 4-6 weeks on request
4 LVE up to 10 bar, with serration 90, ISO Type jaw self-contained chucks LVE, with through-hole, max. operating pressure 10 bar, with serration Short taper mount ISO (DIN 55029, studs for camlock) Size Short-taper A Jaw travel B 3 3 4,2 4,2 4,2 4,2 4,2 4, C ,5 148,5 150, D 63,513 82,563 63,513 82, ,375 82, , , , , , , , ,869 E F , ,8 133,4 104,8 133,4 171,4 133,4 171, ,4 171,4 235 G 3x7/16-6x1/2-3x7/16-6x1/2-6x1/2-6x3/4-16 6x3/4-16 6x7/8-14 6x3/4-16 6x7/8-14 H , , ,5 45 J K L M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M 6 M N 66,5 66,5 80,5 80,5 80, ,5 78,5 78,5 79,5 79,5 79,5 O P R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R 1/4 R M 8 M 8 M 8 M 8 M 8 M 12 M 12 M 12 M 16 M 16 M 16 M 16 M 16 M 16 S T 114,5 114,5 139,5 139,5 145, ,5 162,5 167,5 172,5 172,5 172,5 U,7,7, V 11,5 11, ,5 29,5 31,5 30,5 30,5 35,5 39,5 39,5 39,5 a min ,8 31,8 31,8 41,2 41,2 41, ,5 61,5 61,5 a max ,4 45,4 45, ,5 66,5 66,5 b min ,5 14,5 14,5 b max ,5 19,5 19, c min 14 / min 14 / 2 x 15 2 x 15 2 x max 25 max 25 d ,5 49,5 49, e f H Max. operating Min. operating 2 2 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 2,5 Total clamping force at 6 bar kn Max. admissible speed min -1 Moment of inertia J kgm 2 0,028 0,028 0,125 0,125 0,125 0,262 0,262 0,262 0,675 0,675 0,675 1,35 1,35 1,35 Air consumption/ jaw travel at 6 bar NL Weight without jaws approx. kg 1,5 1,5 3,6 3,6 3,6 6,1 6,1 6,1 9,9 9,9 9,9 12,3 12,3 12, A stationary fastening of the floating ring allows higher speeds from stock 4-6 weeks on request 6199
5 Jaws LVE Air-operated self-contained chucks Tool group C 21 Type 543/538 Reversible top jaws, 3-jaw set, hardened Serration 90 material: 16 MnCr 5 Chuck Size Jaw length Jaw height Jaw width Serration ,5 26 1/16 x /16 x / , /16 x 90 Hardened jaws, supplied as supplement or as spares, must be ground on the chuck. Tool group C 21 Type 543/538 Soft top jaws, 3-jaw set, can be hardened Serration 90 material: 16 MnCr 5 Chuck Size Jaw length Jaw height Jaw width Serration ,5 1/16 x ,5 1/16 x ,5 45 1/16 x 90 Accessories LVE Type Extended T-nuts without screw Type 0040-Y Mounting screws Chuck Size Contents of delivery D E G Size Thread E G D ) 125 piece 12 M /175 piece 12 M8 2x piece 17 M ) 315 piece 21 M M8x M8x /254/315 M12x M16x35 Socket head cap screw to DIN 912, 12.9 A Jaws LVE Type 5-10 Short-taper intermediate flanges ISO (DIN 55026/55021) for LVE-chucks with centering rim Chuck Size Shorttaper A B C Dh5 D 1 F G H K L M N ,525 82,55/85 1) , , , ,525 82,55/85 1) , , , , , , , , , , , , , , , , , , , , , ) dimensions to DIN from stock 4-6 weeks on request
6 Accessories LVE Air-operated self-contained chucks Type 5-91 Electro-Pneumatic Safety Control Block for LVE voltage V 50 Hz V Dc Please order accessories and the connection hoses separately Type 5-91 Manual pulse generator, without cable 2629 piece Contents of delivery Type 1025-Q Double foot-control switch piece Contents of delivery Type 3310-H Service unit Contents of delivery ) piece 1) Containing filter, separator and oiler, R 3/8 Accessories LVE Type 3491-Y Metal-coated hose Chuck Size Design Contents of delivery ) Ø 10/6 p. meter piece ) Ø 12/9 p. meter piece 1) Please indicate the hose length Type 30-Y Connector Chuck Size Design Contents of delivery snap-on connector CX-R 1/4 -PX-6 piece swivel connector LCX-R 1/4 -PX-6 piece straight screw-in unions Ø 12/9 R 1/4 piece swivel connector Ø 12/9 R 1/4 piece from stock 4-6 weeks on request 61
7 Jaw dimensions LVE Reversible top jaws UB, hardened, serration 90 o, material 16MnCr5 Chuck size Type jaw A ,5 103,5 B C 37,5 37, DH E 3,5 3, F ,5 33,5 33,5 G H , J 8,4 8, K 13,5 13, L M N O 4 4 7,5 6,5 6,5 P ,5 24,5 Q ,5 22,5 R 1/ 16 "x90 o 1/ 16 "x90 o 1/ 16 "x90 o 1/ 16 "x90 o 1/ 16 "x90 o Weight/jaw kg 0,170 0,170 0,460 1,130 1,130 Reversible top jaws: Ground to finished size at surcharge. Soft top jaws AB, material 16MnCr5 Chuck size Type jaw A B 26,5 26,5 36, C ,5 54,5 DH E 3,5 3, F G H ,5 42,5 J 8,4 8, K 13,5 13, R 1/ 16 "x90 o 1/ 16 "x90 o 1/ 16 "x90 o 1/ 16 "x90 o 1/ 16 "x90 o Weight/jaw kg 0,3 0,3 0,880 1,400 1,400 Type Chucking capacities LVE Chucking capacities with reversible top jaws UB Chuck size with reversible jaws Type Jaw position A External chucking A A A J Internal chucking J J
LVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationSSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)
SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force
More informationKFE. Power-operated compensating chuck. Techincal features
Power-operated compensating chuck Techincal features Toggle joint lever system Compensation for eccentricities is accomplished by means of a universal ball joint. Large through-hole Made of steel All moving
More informationKFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
More informationKFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationKFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationDURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationIDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationGeared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders without through-hole in their product range. hydraulical
More informationKFD-HS. Power chucks with through-hole. Technical features:
K-S ower cucks wit troug-ole ecnical features: Wedge ook system wit annular piston for igest accuracy in case of loss of centrifugal force bove-average mecanical efficiency Very few components, long jaw
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LATHE CHUCKS INDEPENDENT CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders with through-hole in their product range. hydraulical
More informationOil operated actuating cylinders without through-hole OVS,
OV Oil operated actuating without through-hole TEMPOONI stroke control measuring via magnetostrictivesensors measuring accuracy < 0,1 mm safe and consistent settings no wear, no maintenance no pre-settings
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationNEW ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE. Efficient - Precise - Energy saving
NEW ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE Efficient - Precise - Energy saving ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE Electric clamping systems are still at the starting point of
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LTHE HUKS INDEPENDENT HUKS 2015/2016 We work for customers who have a weakness for our strengths. ompanies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More information3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks
3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks This catalogue describes the key components of a power chucking system featuring the following FORKARDT power chucks: QLC, QLK,
More informationPower Chucks B & BT Series
Power Chucks B & BT Series B Series Three-jaw and two-jaw wedge style power chucks are ideal for high speed chucking, bar chucking and universal machining. These deliver consistent accuracy and repetitive
More informationPneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
More informationHG-F. Quick jaw change ma JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
Quick jaw change ma JAWS SYSTEM FORKARDT For highest speeds Flat gripping force curve 18 16 315 Mdmax. Jaw change in less than 1 minute F G total gripping force (3 jaws) (kn) 14 12 1 8 6 4 2 26 21 16 26
More informationCoA. Constant Face Drivers. Constant Face Drivers CoA
CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationHG-F JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
SYSTEM FORKARDT JAWS Quick jaw change ma For highest speeds Flat gripping force curve 18 315 16 Mdmax. FG Jaw change in less than 1 minute FG total gripping force (3 jaws) (kn) 14 26 12 1 8 21 6 16 4 2
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationNEW POWER-OPERATED CENTERING VICES. Economic and automated clamping with maximum clamping forces and reduced interfering contour
NEW POWER-OPERATED CENTERING VICES Economic and automated clamping with maximum clamping forces and reduced interfering contour POWER-OPERATED CENTERING VICES The new power-operated centering vices have
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More information(855-TMX-CHCK)
855-869-2425 (855-TMX-CHCK) www.tmxworkholding.com Dear Valued ners, We have broadened our line of TMX products the manufacturing world is changing and you need products designed and engineered to exceed
More informationItem no. Initial size D1
Efficient production of bores accurate in dimensions and design on single-spindle and multi-spindle machines. RÖHM designed special floating chucks for reamers with internal coolant supply. The tool locating
More informationTURNING AND MILLING IN ONE SET-UP
TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The
More informationNOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
More informationFNC Power Chucks with Quick Change Jaw System
260.10.05 E 10/05 FNC Power Chucks with Quick Change Jaw System This catalogue describes all components of the FNC universal, quick jaw change, power chucking system. Should you require further information
More informationThe original quick jaw change power chuck. High repeatability when changing jaws
Fast changeover, fast payback: The original quick jaw change power chuck KNCS N Easy lubrication even on vertical machines with 3 radial builtin grease fittings Minimal setup times Jaw change in less than
More informationEUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER
EUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER TMX Power s Featuring the quality and precision associated with European manufacturing, TMX Power s are direct,
More informationPOWER CHUCKS KTN / KTG / KS
POWER CHUCKS KTN / KTG / KS This catalogue features details of the range of FORKRT KT and KS power chucks. Should you require further information beyond the data contained in this catalogue, please refer
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationProfile guide/actuator - RK Compact
Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationTH mm depending on jaw type. Further couplings on request. Steel, nickel-plated. Further temperature ranges on request
WEDGE GRIPS 100, 150, 250, 300, 500 KN Universal grips with lower wedge angle (11 ) for many kinds of materials such as aluminium, copper, weak steel till 30 HRC round and flat. We do not recommend these
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationtough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationFlexible pin & bush coupling
Technical data KX-D Technical data Torque [Nm] NBR 80 Sh-A GJL Steel Dyn. torsion spring stiffness [Nm/rad] Max. speed Max. speed Rated Max. Vibratory [rpm] with Max. bore [mm] [rpm] with Max. bore [mm]
More informationHYDRAULIC ROCK DRILL HL700 Drifter Parts
HYDRAULIC ROCK DRILL Drifter Parts TAMROCK HL 700 DRIFTER 303 790 34 hydraulic rock drill Some parts interchangeable with HL710 2 302 897 41 housing assy' 1 SEP. PART LIST 5 303 787 18 spacer assy 1 INCL.
More informationIndexing chucks Shaft chucks Column chucks
Pull-down chucks ompensating chucks Indexing chucks Shaft chucks olumn chucks Page 100 Page 102 Page 10 Page 106 Page 108 TSF- TSR- Self centering Self centering Pull-down chucks Ø 170-650 mm tongue &
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationSRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.
SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More information> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar
Vertical and link CLAMPS for DEMANDING TASKS vertical CLAMP > piston force up to 20,1 kn > operating pressure 250/350 bar > chemically nitrided body link CLAMP > piston force up to 44,0 kn > operating
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More information3-Jaw High-Speed Open-Center Chuck
HS Standard 3-Jaw High-Speed Open-Center Chuck Application / Customer's Benefit Standard high-speed 3-jaw wedge-style opencenter power chuck Technical features Gripping force transmisstion by wedge structure
More informationCONVENTIONAL WORKHOLDING
simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice
More informationGood reasons to use Albrecht drill chucks
3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened
More informationHydraulic clamping elements
Hydraulic clamping elements hydraulic 3 Contents Product group 3 Hollow piston cylinder single-acting 3.1403 3.2130 Sliding clamp single-acting compact classic 3.2202 3.2204 Angular clamping element single
More informationmechanics RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162
Overview RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162 DSH-S Rotary Swivelling Unit C 164 RF 1 Indexing Table C 166 D 1 Rotary
More informationDescription and operating instructions. TOUCHDEX indexing tables
TOUCHDEX Automatic mechanical indexing tables Description and operating instructions Pag.. 3 TOUCHDEX indexing tables Pag.. 8 COMBIDEX Pag.. 12 TILTING Pag.. 13 MULTIDEX Pag.. 14 Accessories Pag.. On our
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationSKE. Application example. Pneumatic Swivel Heads Universal Swivel Head. Torque 0.4 Nm Nm. Sizes Weight 0.13 kg.. 1.
SKE Sizes 18.. 55 Weight 0.13 kg.. 1.95 kg Axial force 140 N.. 2560 N Torque 0.4 Nm.. 9.0 Nm Bending moment 7.0 Nm.. 128 Nm Application example Robot gripper module for the removal and loading of a variety
More informationJaw Couplings REK DCO
elastic for dynamic applications with curved jaws Features Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive torsion spring properties due to primarily pressurised
More informationQuick jaw change power chucks
Quick jaw change power chucks Page 110 Page 120 Page 124 Page 124 Page 12 Page 18 proofline series fully sealed low maintenance Page 1 proofline series fully sealed low maintenance Page 142 KNCS N Quick
More informationKNCS-N NEW. 2 JAWS Quick Jaw Change Chuck. PRECISE High repeatability when changing jaws High speed. FLEXIBLE Minimum set up times Flexibility
NEW 2 JAWS Quick Jaw Change Chuck PRECISE igh repeatability when changing jaws igh speed FEXIE Minimum set up times Flexibility Technical Data www.smw-autoblok.de/qr/kncs-n2 SMW-AUTOOK Spannsysteme Gmb
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationRotary-Linear Actuator HSE4 Hydraulic / 100 Bar
Rotary-Linear Actuator HSE4 Hydraulic / 100 Bar 4 Function and features K A1 G1 B1 G2 KM Y B2 RE A2 Z S2 A S1 W B KS [ Operation ] [ Operating pressure ] The Eckart rotary-linear actuator HSE4 is a combination
More informationThe PReMIeRe of The year
The PReMIeRe of The year SRU-plus pneumatic universal rotary actuator SRU-plus Pneumatic universal rotary actuator SRU-plus one of the most powerful rotary actuator on the market. a consistent modular
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationGW MK3 DELUGE VALVE HYDRAULIC & PNEUMATIC SPARES 100mm (4 ) 150mm (6 ) 200mm (8 )
25 46 22 29 26 17 27 24 35 23 33 34 2 39 12 13 9 6 36 15 4 37 14 EXTERNAL RESET 32 31 16 8 29 28 30 48 49 22 21 5 18 44 11 10 19 20 47 3 7 38 16 22 7 46 HYDRAULIC VALVE SERVICE PARTS: ITEM DESCRIPTION
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationFront Hub and Disc (4WD Model)
4C 8 DRIVE SHAFT SYSTEM Disassembled View Front Hub and Disc (4WD Model) 411RW001 Legend (1) Bolt (2) Cap (3) Snap Ring and Shim (4) Hub Flange (5) Lock Washer and Lock Screw (6) Hub Nut (7) Outer Bearing
More informationDescription Symbol Definition or explanation Rated torque T KN Torque that can continuously be transmitted over the entire permissible speed range
Coupling selection Normally the is selected according to the nominal torque ( ) shown in the list of technical data, like all other coupling systems. In all cases the torque ( ) must exceed the maximum
More informationRIGHT ANGLE DRIVES TG Series
RIGHT ANGLE DRIVES TG Series Right Angle Fixed Index Drives TG Series The rotary index table transforms a constant input drive motion into an intermittent output drive motion. The intermittent drive motion
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationList of parts for SAB 128 Mk 4
List of parts for SAB 28 Mk 4 Pos. Compressor complete, HF 46-6 Compressor komplete, HM 46-7 Compressor housing 0 Rotor housing, SAB 28 30-052 Bearing cover at suction end 20 Suction cover for SAB 28 303-39
More information03/2017 SRA SELF-ADJUSTING SWING CLAMP CYLINDERS
SRA SELF-ADJUSTING SWING CLAMP CYLINDERS SRA SELF-ADJUSTING SWING CLAMP CYLINDERS PATENT-REGISTERED SRA CYLINDERS Double-acting swing clamp cylinders with integrated work support of the SRA series have
More information