CoA. Constant Face Drivers. Constant Face Drivers CoA
|
|
- Cameron Stone
- 5 years ago
- Views:
Transcription
1 CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting pistons: 2000 dan Type Basic body with morsetaper (basic bodies without centre) CoA hydraulic MT A B H Z Stroke Centres max. 45 min ,5 max. 45 min ,5 max. 45 min ,5 max. 45 min hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting pistons: 2000 dan Type Basic body with morsetaper, with draw-offnut, CoA hydraulic MT A B H Z Stroke Centres max. 45 min ,5 max. 45 min ,5 max. 45 min ,5 max. 45 min For clamping in lathe chucks with unstepped jaws - hydraulical respectively mechanical pressure compensation provides a uniform clamping force also on uneven faces of workpieces Type Basic body for clamping in lathe chucks, with springset, CoA mechanical / hydraulic A B G H M Z Stroke Centres ) max. 45 min ) max. 45 min ) with hydraulic compensation 2) with mechanical compensation 2026
2 Constant face drivers CoA - mechanic pressure compensation provides a uniform clamping force also on uneven faces of workpieces Constant Face Drivers CoA Type Basic body with short taper ISO (DIN 55026) mechanical compensation, with spring set, CoA mechanical Taper A B E F G H K M O P T Z Stroke Centres M max. 45 min , , M max. 45 min , , M max. 45 min , , hydraulical respectively mechanical pressure compensation provides a uniform clamping force also on uneven faces of workpieces Type Basic body flange type, with springset, CoA mechanical / hydraulic A B D E F G H M O P T Z Stroke Centres ) M max. 45 min ) M max. 45 min ) with hydraulic compensation 2) with mechanical compensation 2027
3 Adapter plate CoA Constant Face Drivers CoA Type Adapter plate short taper without spring set Design Taper A B D I K DIN , DIN , DIN , DIN , DIN , DIN , DIN , DIN , DIN , DIN , DIN , DIN ,
4 Accessories CoA Type Driving discs, toothed right-hand , , Driving discs with carbide toothing, friction lining or diamant granulation on request Accessories Type Driving discs, toothed left-hand , , Driving discs with carbide toothing on request Type Driving discs, toothed right- and left-hand , , Driving discs with carbide toothing on request Type Driving discs, right-hand H H H ,
5 Accessories CoA Accessories Type Driving discs, left-hand H H H , Type Driving discs, right- and left-hand H H H , Type Driving discs, which can be used on 4 sides right-hand H C Matching center Type Driving discs, which can be used on 4 sides left-hand H C Matching center
6 Accessories CoA Type Driving discs, which can be used on 4 sides right- and left-hand H C Matching center Accessories Type Centres, CoA circuit Ø N Y Z Type , Centres with head, CoA Taper Ø N Z A Y Type Hard metal driving plates right- or left-hand Size circuit Ø x3, ,5x3, Type Hard metal driving plates right- and left-hand Size circuit Ø x3, ,5x3, Type Mounting sleeve for the clamping of a face driver in lathe chuck A G B MT inside A B C D G , , , , C D 2031
7 Accessories CoA Accessories Tool group C15 Type 0167-Y Threaded pin Size circuit Ø M 4 x M 5 x M 5 x Tool group C15 Type 5191-Y O-ring Size ,82x3,53 Type 680 RÖHM slide rule to calculate axial tailstock loading
8 CoA - Assortments Type 680 Basic equipment in a carton hydraulic, clamping dia mm, mm MT right-hand left-hand with draw-off nut Constant Type 680 Small assortment in wooden box hydraulic, clamping dia mm, mm MT right-hand left-hand with draw-off nut Type 680 Large assortment in wooden box hydraulic, clamping dia mm, mm MT right-hand left-hand with draw-off nut
tough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More informationTURNING AND MILLING IN ONE SET-UP
TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationGeared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationKFE. Power-operated compensating chuck. Techincal features
Power-operated compensating chuck Techincal features Toggle joint lever system Compensation for eccentricities is accomplished by means of a universal ball joint. Large through-hole Made of steel All moving
More informationLVE - with integrated cylinder
LVE - with integrated cylinder Technical features: Wedge system with integrated clamping cylinder Large through-hole Scope of delivery: Chuck and jaw mounting screws, T-nuts (without top jaws) Unobstructed
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LATHE CHUCKS INDEPENDENT CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationCentres-Live Chucks Type
Centres-Live Chucks Type 300-422 Face Drivers Type 300-303 with mechanical compensation 2 4 5 6 7 3 8 9 1 Very large bearing surface. Housing moves with centre to compensate for diefferent sizes of component
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationSSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)
SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force
More informationIndexing chucks Shaft chucks Column chucks
Pull-down chucks ompensating chucks Indexing chucks Shaft chucks olumn chucks Page 100 Page 102 Page 10 Page 106 Page 108 TSF- TSR- Self centering Self centering Pull-down chucks Ø 170-650 mm tongue &
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationIDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LTHE HUKS INDEPENDENT HUKS 2015/2016 We work for customers who have a weakness for our strengths. ompanies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationMeasuring and testing equipment. Run-out testers Comparator stands Small measuring instruments
Run-out testers Comparator stands Small measuring instruments Benennung Artikel-Nr. Run-out testers Height of centres 50 mm height of centres 75 mm Benzing run-out testers consist of a base plate, a pair
More informationUNIVERTOR A. Pick-up-turning centre. The systems supplier for manufacturing technology from one source
The systems supplier for manufacturing technology from one source A flexible pick-up turning system for small, medium and large-volume production UNIVERTOR A Pick-up-turning centre Pick-up-turning procedure
More informationBB6000 Work Sheet. Tool head. assembly. (boring head. shown) Axial feed unit Tool carrier. Hydraulic motor
BB6000 Work Sheet Bearing support (three-arm end mount shown) Tool head (boring head shown) Boring bar/ leadscrew Torque arm Rotational drive unit Axial feed unit Tool carrier Bearing support (four-arm
More informationRadial Drilling And Milling Heads TYPE HAAS
Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106
More informationItem no. Initial size D1
Efficient production of bores accurate in dimensions and design on single-spindle and multi-spindle machines. RÖHM designed special floating chucks for reamers with internal coolant supply. The tool locating
More informationClamping equipment. Drill chucks Reducing bushes Centre points Front-face carrier. From page 40-3
equipment rill chucks Reducing bushes Centre points Front-face carrier From page 40-3 and-operated chuck Power chuck Collet chuck ydraulic cylinder From page 40-17 Jaws Slot nuts From page 40-34 ssembly
More information> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar
Vertical and link CLAMPS for DEMANDING TASKS vertical CLAMP > piston force up to 20,1 kn > operating pressure 250/350 bar > chemically nitrided body link CLAMP > piston force up to 44,0 kn > operating
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More information3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks
3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks This catalogue describes the key components of a power chucking system featuring the following FORKARDT power chucks: QLC, QLK,
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationDesign principle / Technical features
Design principle / Technical features Components and construction groups IV 4 Stationary opening unit - Construction group IV. Non-rotating distributor. Non-rotating housing. Housing, axial movable Power
More informationGood reasons to use Albrecht drill chucks
3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened
More informationKFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
More informationDURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
More informationSTANDARD PROGRAMME Hydraulic Chucks
20 STANDARD PRORAMME STANDARD PRORAMME 23 Hydraulic Chuck ISO 7388-1, Form AD (prev. DIN 69871-AD), extra short design d 1 d 2 d 3 l3 ISO 7388-1 Form AD 3 µm h6 2.5 25000 min Nominal size SK/ISO Dimensions
More information03/2017 SRA SELF-ADJUSTING SWING CLAMP CYLINDERS
SRA SELF-ADJUSTING SWING CLAMP CYLINDERS SRA SELF-ADJUSTING SWING CLAMP CYLINDERS PATENT-REGISTERED SRA CYLINDERS Double-acting swing clamp cylinders with integrated work support of the SRA series have
More informationOil operated actuating cylinders without through-hole OVS,
OV Oil operated actuating without through-hole TEMPOONI stroke control measuring via magnetostrictivesensors measuring accuracy < 0,1 mm safe and consistent settings no wear, no maintenance no pre-settings
More informationMATSUMOTO and NEIDLEIN maintain a partnership for the production and supply of face drivers, live centers, and dead centers on a worldwide basis.
ULTRA-LIVE CENTERS DEAD CENTERS MATSUMOTO and NEIDLEIN maintain a partnership for the production and supply of face drivers, live centers, and dead centers on a worldwide basis. NEIDLEIN live centers and
More informationPOWER CHUCKS KTN / KTG / KS
POWER CHUCKS KTN / KTG / KS This catalogue features details of the range of FORKRT KT and KS power chucks. Should you require further information beyond the data contained in this catalogue, please refer
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationHG-F. Quick jaw change ma JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
Quick jaw change ma JAWS SYSTEM FORKARDT For highest speeds Flat gripping force curve 18 16 315 Mdmax. Jaw change in less than 1 minute F G total gripping force (3 jaws) (kn) 14 12 1 8 6 4 2 26 21 16 26
More informationTable of contents gripper electrical
Gripper electrical Table of contents gripper electrical Order no. Stroke per Gripping force Gripping force Page jaw [mm] in opening [N] in clothing [N] Product Information GEP1402 2 140 14 10 GEP1406C
More informationContents. ECCO single-phase. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy
Contents Contents 1. Scissors assy.... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assy.... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...
More informationMeasuring and testing equipment. Run-out testers Comparator stands Small measuring instruments
Run-out testers omparator stands Small measuring instruments ontents Tolerances 3 Run-out testers RP 50-200 / RP 75-200 4 Accessories for RP 50-200 / RP 75-200 5-7 RP 100-450 / RP 150-450 8 Accessories
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationKFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
More informationHG-F JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
SYSTEM FORKARDT JAWS Quick jaw change ma For highest speeds Flat gripping force curve 18 315 16 Mdmax. FG Jaw change in less than 1 minute FG total gripping force (3 jaws) (kn) 14 26 12 1 8 21 6 16 4 2
More informationCRANKSHAFT GRINDING MACHINES
CRANKSHAFT GRINDING MACHINES 40 years of experience in Crankshaft Grinding Machines. The most complete range from 1.5 meters to 14 meters crankshaft length AZ is the world leader in the production of crankshaft
More informationCOMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
More informationIndustrial Drill Chucks & Live Centers
Since 1957 Industrial Drill Chucks & Live Centers 2 From our headquarters in the province of Barcelona, Spain, Llambrich Precision, S.L. has been designing and manufacturing drill chucks and machine tool
More informationAutomatic Positioning System APS
Automatic Positioning System APS 0 MODULES pag. 0. 2 CLAMPING PINS pag. 0. 5 / 0. 8 PLATES pag. 0. 9 PLATES FOR 5 AXIS pag. 0. 13 ANGLE PLATE pag. 0. 21 TOMBSTONES pag. 0. 26 CRANKWEBS pag. 0. 30 STEEL
More informationPolon Piston sealing set
The double-acting piston sealing set profile consists of a PTFE piston sealing ring and an elastomer O-Ring as a preloading element. Profile is particularly suitable for double-acting pistons in control
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders without through-hole in their product range. hydraulical
More informationMarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments
+ MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments Indicator Stands MarStand 815 GN With Cast Iron Base MarStand 815 MA / 815 MB / 815MG / 815 P With Magnetic Base 8-2 8-3 Post
More informationContents SIGMA. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy
Contents Contents 1. Scissors assy.... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assy.... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...
More informationTyphoon L Series CNC Turning Centres
Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal
More informationVALVE REPAIR MACHINES. VM7000 Repair a safety valve in about the same time it would take to remove the damaged valve.
VALVE REPAIR MACHINES FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA VM6000 Repair in-line valves with 2.5-13 inch (63.5-330.2 mm) diameter pressure seal bores The Model VM6000 Portable
More informationDUMPER. Data Book 50 Hz
Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 GAMMA 203 CURVE SPECIFICATIONS 204 1X 51-S 205 1X 51.5-S 206 2X 51.5-S 207 2X 52.2-S 208 2X 53-S 209 3X 53.7-S 210 3X
More informationCompact Gas Springs. subject to alterations. f199
Compact Gas Springs 2 11936 8 1 f199 Compact Gas Springs for small displacement and high forces Mounting variations 2490.12.00420. Pedestal foot clamp for 2490.12.00420 Clamping flange VDI 3003 for 2480.21./2490.12.00420
More informationCTX production turning machines
www.dmgmori.com CTX beta 800 4A CTX beta 1250 4A CTX production turning machines Machine and technology Applications and parts Control technology Energy efficiency Technical data CTX beta 4A with the highest
More informationCG Crankshaft Grinding Machine
CG CG360-3300 CRANKSHAFT ROTATION CLUTCH PNEUMATIC FACEPLATE LOCK KNOB HYDRAULIC SLEEVE OF TAILTOCK QUILL LOCK ( U VERSION) HIGH SPEED AND WORKING QUALITY The crankshaft grinding machines model CG have
More informationThat s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance
[ That s ] E[M]CONOMY: NEW Not just training: Real action! CONCEPT TURN 260 CNC training with industrial performance Concept TURN 260 As a systematic advancement of the CT250, the CT260 convinces by its
More informationConventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 20 D. Universal lathes with toolmaking precision for industrial applications
Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 2 D Universal lathes with toolmaking precision for industrial applications EMCOMAT 14 S/14 D EMCOMAT 17S/17D/2D The Technology The EMCOMAT 14 S/14
More informationOPTIMAL COMPONENT SUPPORT. Optimal support of components for every application, e.g. crankshaft machining.
OPTIMAL COMPONENT SUPPORT Optimal support of components for every application, e.g. crankshaft machining 6150 SELF-CENTERING STEADY RESTS With self-centering steady rests, RÖHM makes an important contribution
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East Windsor,
More informationMachine elements. Pneumatic stamping unit. Toggle-lever presses
Machine elements Pneumatic stamping unit Toggle-lever presses Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07
More informationStandard model for offset drives by chainwheel, sprocket or gear. Chain coupling adaptor for in-line drives, simple & compact
Type DSF/EX friction torque limiters Friction torque limiters are simple low cost devices that remove shock loads and protect machinery from overload damage. Easy torque setting and wide torque range Bi-directional
More informationAtling Self-Centering Steady Rests
Atling Self-Centering Steady Rests This catalog lists all self centering Steady Rests and their accessories. Note: Dimensions and data given in this catalog may not always correspond to the latest design
More informationTel
30 20 10 60 0 60 H B g ed e A H1 A1 VSC-5A SUIT FOR BS-0 OR HV-6, VUT-6, VU-150 VSC-6A SUIT FOR BS-1 OR HV-8, 10, VUT-6, VU-200 VSC-7A, 8A SUIT FOR BS-2 OR HV-10, 12, 14, VUT-10, 12 VSC-10A SUIT FOR HV-14,
More informationCompact Gas Springs. subject to alterations. f199
Compact Gas Springs 2 11936 8 1 f199 Compact Gas Springs for small displacement and high forces Mounting variations 2490.12.00420. Pedestal foot clamp for 2490.12.00420 Clamping flange VDI 3003 for 2480.21./2490.12.00420
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationMAGNETIC-STAND DRILLING MACHINES. profiline
MAGNETIC-STAND DRILLING MACHINES profiline Comparison of technical data RS4 - RS40e - The New RS GENERATION! RS20 / RSM20 Technical data RS4 RS5e RS10 RS20 RSM20 Mag. clamping force: 10.000 N 10.000 N
More information