KNCS-N NEW. 2 JAWS Quick Jaw Change Chuck. PRECISE High repeatability when changing jaws High speed. FLEXIBLE Minimum set up times Flexibility
|
|
- Deirdre McLaughlin
- 5 years ago
- Views:
Transcription
1 NEW 2 JAWS Quick Jaw Change Chuck PRECISE igh repeatability when changing jaws igh speed FEXIE Minimum set up times Flexibility Technical Data SMW-AUTOOK Spannsysteme Gmb Wiesentalstraße 28 D Meckenbeuren Tel.: / 5-0 Fax: / info@smw-autoblok.de
2 QUICK JAW CANGE 2-JAW-CUCK Main dimensions and technical data Jaw position: open position for external clamping ase jaw position o" C n m ase jaw position p" C α1 30 = = g o k f d d c 7 7'30" p r l E R2 α2 A D N O F G2 G1 K M R1 P Q N O D 30 S Subject to technical changes. For more detailed information please ask for customer drawing. a b Type Mounting Rotating ring nut/depth Piston thread/depth Piston stroke max. Fixing bolt circle Fixing bolt max. Ø Thread / Thread depth Thread / Thread depth Thread / Thread depth max. / min. max. / min. ase jaw tooth pitch ase jaw offset ase jaw offset α1 / α2 (for fixing bolts) Stroke per jaw at piston stroke K max. actuating force max. total gripping max. speed Weight without jaws Moment of inertia Rec. closed center cylinder Rec. open center cylinder Z1 A06 A08 Z1 Z220 A06 A08 Z220 Z300 A08 A11 A C D E F G1 Mx1.5 / 16 Mx2.0 / 20 M115x2.0 / 22 G2 Mx2.0 / 19 M102x2.0 / 23 M132x2.0 / 25 K M N O M12 M12 M16 M12 M16 M16 M20 M16 M20 P Q R1 M6 / 10 M8 / 14 M10/16 R2 M10 / 12 M10 / 18 M10/16 S a b f c d f g k M8 / 13 M12 / 17 M12 / 17 l m n o / / / p / / / r teeth deg / / / mm kn kn r.p.m. kg kg m² Type Type 7 / 25 8 / 28 8 / SIN-S / 150 SIN-S 150 / 1 SIN-S 150 / 1 / 200 VNK-T VNK-T VNK-T
3 Gripping force diagram Ordering review Gripping force diagram QUICK JAW CANGE 2-JAW-CUCK F G Total gripping force at 2 jaws (kn) The data in the diagrams refer to 2-jaw-chucks, newly maintained according to their service manuals using SMW-AUTOOK K05 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck. Safety advice/danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly Speed (r.p.m.) Ordering review + GK + WAK Supply range: Chuck + key + mounting bolts + mounting key + 1 set hardened base jaws type GK + 1 set soft top jaws type WAK + set of coverplates Spindle mounting small large Z A A A Z A A A Z A A A GK WAK + GST Supply range: Chuck + key + mounting bolts + mounting key + 1 set hardened, reversible stepped monoblock jaws type GST, ground on chuck + set of coverplates Spindle mounting small Z-Rand groß + GK + GUA Supply range: Chuck + key + mounting bolts + mounting key + 1 set hardened base jaws type GK + 1 set hardened, reversible top jaws type GUA, ground on chuck + set of coverplates Spindle mounting small large Size Size Size GST GK GUA
4 QUICK JAW CANGE 2-JAW-CUCK ASE JAWS and TOP JAWS GK ardened base jaws GK 200 GK 250 GK N S S N WAK Soft top jaws WAK WAK WAK A A UV Soft monoblock jaws UV 200 UV 250 UV A h Futtervorderkante GST ardened stepped monoblock jaws GST 210 GST 2 GST h T A A A A J J J J S J3 J2 J1 A1 T h S Futtervorderkante Gripping ranges J4 A4 A3 A2
5 SOFT TOP JAWS wide version ARD REVERSIE TOP JAWS Soft top jaws wide version WAKS Soft top jaws wide version QUICK JAW CANGE 2-JAW-CUCK Type A kg / set WAKS WAKS WAKS WAKS WAKS WAKS WAKS WAKS WAKS WAKS WAKS WAKS WAKS WAKS WAKS SMW-AUTOOK chuck type A ard reversible top jaws GUA ard reversible top jaws GUA 200 GUA 250 GUA 250 Id.-Nr. No T A A A A A A J J J J J J S "o" J2 J1 A1 S "o" A5 A6J6 "p" T Gripping ranges ase jaw position o ase jaw position p J5 J4 A4 "p" A2 A3J3 For additional jaw options & accessories please request our 150 page special catalogue!
6 Notes
7 SMW-AUTOOK Spannsysteme Gmb Tel.: +49 (0) Vertrieb Inland: Fax: +49 (0) vertrieb@smw-autoblok.de Sales International: Fax: +49 (0) sales@smw-autoblok.de
The original quick jaw change power chuck. High repeatability when changing jaws
Fast changeover, fast payback: The original quick jaw change power chuck KNCS N Easy lubrication even on vertical machines with 3 radial builtin grease fittings Minimal setup times Jaw change in less than
More informationHG-F JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
SYSTEM FORKARDT JAWS Quick jaw change ma For highest speeds Flat gripping force curve 18 315 16 Mdmax. FG Jaw change in less than 1 minute FG total gripping force (3 jaws) (kn) 14 26 12 1 8 21 6 16 4 2
More informationHG-F. Quick jaw change ma JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
Quick jaw change ma JAWS SYSTEM FORKARDT For highest speeds Flat gripping force curve 18 16 315 Mdmax. Jaw change in less than 1 minute F G total gripping force (3 jaws) (kn) 14 12 1 8 6 4 2 26 21 16 26
More informationQuick jaw change power chucks
Quick jaw change power chucks Page 110 Page 120 Page 124 Page 124 Page 12 Page 18 proofline series fully sealed low maintenance Page 1 proofline series fully sealed low maintenance Page 142 KNCS N Quick
More informationKNCS-matic NEW. 3 JAWS Automatic Quick Jaw Change. FLEXIBLE Automatic quick jaw change utilizing the machines loading robot
NEW 3 JAWS Automatic Quick Jaw Change FLEXIBLE Automatic quick jaw change utilizing the machines loading robot PRECISE High repeatability when changing jaws High speed SMW-AUTOBLOK Spannsysteme GmbH Wiesentalstraße
More informationSLU SLUA BASIC LINE ECONOMIC CLAMPING. from the market leader in Steady Rests. Best Price - Top Quality
BASIC LINE from the market leader in Steady Rests ECONOMIC CLAMPING Best Price - Top Quality Steady Rest Steady Rest Application/customer benefits Series - Economic Clamping Best Price - Top Quality!
More informationE V7 GRINDING 15E
E - 2016-08 - V7 GRINDING 15E SMW-AUTOBLOK worldwide Headquarters / Production Plants Subsidiaries Representations SMW-AUTOBLOK manufacturing plant Meckenbeuren AUTOBLOK manufacturing plant Caprie-Torino
More informationCCS NEW CHUCK SWITCHING SYSTEM
EW HUK SWITHIG SYSTEM Highest repeatability and change-over accuracy utomatic coupling of chuck in a single actuation Large through hole Optical control for the locking status Protected against contamination
More information3-Jaw High-Speed Open-Center Chuck
HS Standard 3-Jaw High-Speed Open-Center Chuck Application / Customer's Benefit Standard high-speed 3-jaw wedge-style opencenter power chuck Technical features Gripping force transmisstion by wedge structure
More informationKFD-HE. Power chucks with through-hole
K-HE Power cucks wit troug-ole Tecnical features: Rugged construction Large troug-ole Hig radial and axial true-running accuracy irect lubrication of all wearing surfaces Used in conjunction wit RÖHM actuating
More informationDURO-NC. Power chucks with quick-acting jaw change system. Technical features:
K URO-NC Power cucks wit quick-acting jaw cange system Tecnical features: Central jaw unlocking for moving, canging and turning of jaws Hig workolding accuracy and gripping force Cucking power transmitted
More information3-Jaw Closed-Center Chuck (381mm mm)
HC 3-Jaw Closed-Center Chuck (381mm - 1000mm) Application / Benefits Ideal for vertical lathes and work that does not require a through-hole Large sizes offered for large work Technical features Wedge
More informationKFD. Power chucks without through-hole. Technical features:
K Power cucks witout troug-ole Tecnical features: Proved power cuck wit ig load carrying capacity, long life and ig workolding accuracy Te operating power is transmitted by means of a sturdily dimensioned
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationOKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationKFE. Power-operated compensating chuck. Techincal features
Power-operated compensating chuck Techincal features Toggle joint lever system Compensation for eccentricities is accomplished by means of a universal ball joint. Large through-hole Made of steel All moving
More informationQUICK-ACTING JAW CHANGE SYSTEM
QUICK-ACTING JAW CHANGE SYSTEM The RÖHM key bar chucks with quick-acting jaw change system convince in two ways. On the one hand the jaws can be quickly and easily turned, changed or offset over the entire
More informationCOPY OF THE ORIGINAL CHANGE THE ROLLERS GUIDE. Type SLU-X Type SR Type K Type KLU Type SLU / SONDER. Date: Version: Language: English
COPY OF THE ORIGINAL CHANGE THE ROLLERS GUIDE Type SLU-X Type SR Type K Type KLU Type SLU / SONDER Date: Version: Language: 2014-06 2 English Overview Content General safety instructions 4 General installation
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationKFD-HE. Power chucks with through-hole
K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationStationary chucks pneumatic/hydraulic
Stationary chucks pneumatic/hydraulic US-CL US-A With 2 jaws With long or long stroke chucks normal stroke chucks Stationary cylinder and chuck unit, hydraulic Ø 80-315 mm unit with static cylinder and
More informationDescription and operating instructions. TOUCHDEX indexing tables
TOUCHDEX Automatic mechanical indexing tables Description and operating instructions Pag.. 3 TOUCHDEX indexing tables Pag.. 8 COMBIDEX Pag.. 12 TILTING Pag.. 13 MULTIDEX Pag.. 14 Accessories Pag.. On our
More informationKFD-EC / KFD-F-EC. Power chucks without through-hole. Technical features:
Power cucks witout troug-ole K-EC / K--EC Tecnical features: Easy Care: low-maintenance and wear resistant Abrasionproof coating of te base jaw guidings Improofed dirt protection by integrated jaw guiding
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LATHE CHUCKS INDEPENDENT CHUCKS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and
More informationSSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)
SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force
More informationLVE - with integrated cylinder
LVE - with integrated cylinder Technical features: Wedge system with integrated clamping cylinder Large through-hole Scope of delivery: Chuck and jaw mounting screws, T-nuts (without top jaws) Unobstructed
More informationJAWS FOR ALL COMMON MANUAL AND POWER CHUCKS
www.smw-autolok.de JAWS FOR ALL COMMO MAUAL AD POWER CUCKS SMW-AUTOLOK jaw programm Jaws for all common manual and power chucks Special jaws according to the customer drawings Turn keys = complete engineering
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders with through-hole in their product range. hydraulical
More informationThe quick jaw change chuck KNCS-NB / KNCS-NBX can use all existing top jaws KNCS-NB
Fst chngeover, fst pybck: The quick jw chnge chuck KNCS-NB / cn use ll existing top jws KNCS-NB/: cn use existing jws Miniml set-up times Jw chnge in less thn 1 minute KNCS -NB High repetbility when chnging
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationIndexing chucks Shaft chucks Column chucks
Pull-down chucks ompensating chucks Indexing chucks Shaft chucks olumn chucks Page 100 Page 102 Page 10 Page 106 Page 108 TSF- TSR- Self centering Self centering Pull-down chucks Ø 170-650 mm tongue &
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationNEW ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE. Efficient - Precise - Energy saving
NEW ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE Efficient - Precise - Energy saving ELECTRICAL CYLINDER WITH AND WITHOUT THROUGH-HOLE Electric clamping systems are still at the starting point of
More informationThe original quick jaw change power chuck KNCS -NB KNCS -NBX >> ALL EXISTING TOP JAWS CAN USED.
Fst chngeover, fst pybck: The originl quick jw chnge power chuck KC - KC -X ARE TROU OE EXTRA ARE TROU OE >> A EXITI TOP JAW CA UED. Miniml set-up times Jw chnge in less thn 1 minute igh repetbility when
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationIDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationPOWER CHUCKS KTN / KTG / KS
POWER CHUCKS KTN / KTG / KS This catalogue features details of the range of FORKRT KT and KS power chucks. Should you require further information beyond the data contained in this catalogue, please refer
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationLATHE CHUCKS INDEPENDENT CHUCKS
LTHE HUKS INDEPENDENT HUKS 2015/2016 We work for customers who have a weakness for our strengths. ompanies intent on making a difference are obliged to develop constantly as well as deploy their strengths
More informationGeared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationFlexible. Light. Productive. LEG Long-stroke Gripper
LEG Flexible. Light. Productive. LEG Long-stroke Gripper Light long-stroke gripper for flexible and highly dynamic handling of various components Field of Application For use in a clean working environment,
More information3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks
3QLC, 3QLK, 3QLC-KS, 3QLK-KS 2QLC-LS, 3QLC-LS, 3QLC-AG, QLC-KT Power Chucks This catalogue describes the key components of a power chucking system featuring the following FORKARDT power chucks: QLC, QLK,
More informationORIGINAL INSTRUCTION MANUAL AUTOMATIC POSITIONING SYSTEM APS. Date: Version: Language: English (English)
ORIGINAL INSTRUCTION MANUAL AUTOMATIC POSITIONING SYSTEM APS Date: Version: Language: 2016-11 4 English (English) Overview Content Declaration of incorporation 4 General safety instructions 5 Customer
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationNEW POWER-OPERATED CENTERING VICES. Economic and automated clamping with maximum clamping forces and reduced interfering contour
NEW POWER-OPERATED CENTERING VICES Economic and automated clamping with maximum clamping forces and reduced interfering contour POWER-OPERATED CENTERING VICES The new power-operated centering vices have
More informationPARALLEL INDEX DRIVES TP Series
PARALLEL INDEX DRIVES TP Series Calculations J = moment of inertia Application examples Direct driven belt/chain = M B + M B M B = c a n 2π n x t² M R = µ g R m = M B + M R + (M ST )* M ST = m g R M AN
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationPE Planetary Gearheads
Planetary Gearheads Unparalleled: This planetary gearbox maintains its maximum efficiency even at the highest speeds Planetary Gearheads are notably light and extremely powerful, yet suitable for complex
More information3.2 lean SL 5 Technical data & dimension sheets lean SL series Technical data
3.2.1 lean SL series Technical data 3.2 lean SL 5 Technical data & dimension sheets 3.2.1 lean SL series Technical data lean SL lean SL double! Make sure that the article number refers to the correct pinion
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More informationAGE-XY. Application example. Compensation XY Compensation Units Light Loads. Workpiece weight 4 kg.. 10 kg. Sizes 050..
AGE-XY Sizes 050.. 080 Workpiece weight 4 kg.. 10 kg Compensation paths XY ± 2.5 mm.. ± 4 mm Rotation ± 12.. ± 16 Application example Insertion unit for assembling a pin in a bore, in an approximately
More informationEUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER
EUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER TMX Power s Featuring the quality and precision associated with European manufacturing, TMX Power s are direct,
More informationFNC Power Chucks with Quick Change Jaw System
260.10.05 E 10/05 FNC Power Chucks with Quick Change Jaw System This catalogue describes all components of the FNC universal, quick jaw change, power chucking system. Should you require further information
More informationPOWER CHUCKS CYLINDERS / STEADY RESTS
POWER CHUCKS CYLINDERS / STEADY RESTS 2015/2016 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East Windsor,
More informationRIGHT ANGLE DRIVES TG Series
RIGHT ANGLE DRIVES TG Series Right Angle Fixed Index Drives TG Series The rotary index table transforms a constant input drive motion into an intermittent output drive motion. The intermittent drive motion
More informationCompact. Flat. Productive. Compact Change System CWS
CWS Compact. Flat. Productive. Compact Change System CWS Compact manual change system with integrated air feed-through for the most important SCHUNK gripping and compensating modules. Field of Application
More informationT-nuts, jaw blanks 54 SMW-AUTOBLOK
T-nuts, jaw blanks 54 SMW-AUTOBLOK T-nuts grippers SMW-AUTOBLOK Berg Forkardt owa Kitagawa Röm Scunk ST T-nuts for cucks ST IC serration 1/16 x 90 or 3/32 x 90 Page 56 STE double T-nuts for cucks STE IC
More informationDescription and operating instructions. TOUCHDEX indexing tables
utomatic mechanical indexing tables 1 Pag. 1. 3 TOUCHDEX indexing tables Pag. 1. 8 COMBIDEX Pag. 1. 13 TITING Pag. 1. 14 MUTIDEX Pag. 1. 1 ccessories Pag. 1. On our website: www.omlspa.it (in the video
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders without through-hole in their product range. hydraulical
More informationOil operated actuating cylinders without through-hole OVS,
OV Oil operated actuating without through-hole TEMPOONI stroke control measuring via magnetostrictivesensors measuring accuracy < 0,1 mm safe and consistent settings no wear, no maintenance no pre-settings
More informationSizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high
More informationKFD-HS. Power chucks with through-hole. Technical features:
K-S ower cucks wit troug-ole ecnical features: Wedge ook system wit annular piston for igest accuracy in case of loss of centrifugal force bove-average mecanical efficiency Very few components, long jaw
More informationRadial Piston Motor (Multi-Stroke) MCR3
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service Radial Piston Motor (Multi-Stroke) MCR3 RE 15205/06.09 1/18 Replaces: 02.98 Data sheet Series 3X Size 160
More informationThe new performance class...
The new performance class... 10/2017 EP(X)-II 30/40 EP(X)-II 30/40 twin tube actuator The latest generation of twin tube units Move-Tec EP(X)-II 30/40 Your application takes centre stage slow langsam A
More informationServomech 1.4 BALL SCREW LINEAR ACTUATORS Series BSA
1.4 BALL SCREW LINEAR ACTUATORS Series BSA Technical features table SIZE FEATURES BSA 10 BSA 20 BSA 25 BSA 30 BSA 40 Rod diameter [mm] 25 25 30 35 40 Protective tube diameter [mm] 36 36 45 55 60 Motor
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationZERO BACKLASH GEARING
ZERO BACKLASH GEARING Based on Nexen s innovative Roller Pinion technology, the Geared Bearing comes complete with a gear and a precision grade, high capacity bearing. With a wide range of sizes and ratios,
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationmechanics RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162
Overview RDH-M Indexing Table / Rotary Axis C 158 RDH-S Indexing Table / Rotary Axis C 160 RDH-XS Indexing Table / Rotary Axis C 162 DSH-S Rotary Swivelling Unit C 164 RF 1 Indexing Table C 166 D 1 Rotary
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded
More informationPLE. PLE Economy Line. Unparalleled: This planetary gearbox maintains its maximum efficiency even at the highest speeds
Economy Line Unparalleled: This planetary gearbox maintains its maximum efficiency even at the highest speeds The is perhaps the basis of our success. It is notably light, extremely powerful, yet suitable
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationModular Electric Actuators OSP-E ORIGA SYSTEM PLUS
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Sizing Performance Overview Maximum Loadings Sizing of Actuator The following steps are recommended for selection : 1. Check that maximum values in the
More informationPK couplings. Product description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
More informationProduct description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
More informationTORQLIGHT SAFETY COUPLINGS
LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction
More informationV SWISS MADE LINEAR TECHNOLOGY
Excerpt from main catalogue inear modules V 11-15 SWISS MDE INER TECHNOOGY ine Tech inear modules Table of contents Product overview 6 7 Design fundamentals / ubrication / Maintenance 8 Profile cross-sections
More informationNumber of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)
LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationMax. particle size 5 µm. Pressure for determining piston forces. Materials:
Rodless cylinders Rodless cylinder 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³
More information