PK couplings. Product description. PK couplings

Size: px
Start display at page:

Download "PK couplings. Product description. PK couplings"

Transcription

1 Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment of radial offset within the designed adjustment range. The coupling functions on a parallel crank principle (similar to the traditional draughting mechanism). Each movement at the input is faithfully repeated at the output, without loss or change. No relative motion occurs regardless of the degree of offset, unlike a universal joint assembly. The INKOMA-PK coupling comprises three discs with their faces parallel to each other, connected by at least links. One outer disc is connected to the input shaft and the other to the output shaft. The centre disc provides the connection, via the links, to the outer discs. Features of the INKOMA-PK coupling The INKOMA-PK coupling has synchronous running characteristics; I.e. the input and output run totally synchronously with no angular displacement, regardless of the degree of offset. The INKOMA-PK coupling is dynamically balanced and damps and compensates for radial vibrations imposed from outside the drive. The INKOMA-PK coupling transmits purely torque and therefore imposes no radial loads on related bearings. The INKOMA-PK coupling requires very little space when compared with the offset capability. The INKOMA-PK coupling will tolerate all radial offsets, lying within the designed capability of the coupling. Within the limiting values the radial offset can be freely adjusted whilst transmitting torque loads and at any speed. The angular velocities remain completely synchronous between input and output. Special sizes and designs are possible. Please enquire

2 Contents list i Technical information versions A1, A2, A, A, A notes for installation and operation lubrication for PK coupling Page Dimensions NA - NA 196 arrangement and permissible operating range PK coupling (A1, A2, A, A, A) Page i Selection table torque based life selection table power based life selection table Page Dimension NA 2 - NAS 0 (heavy series) PK coupling (A1, A2, A, A) Page 0-01 Dimension GLK, GL (light series, plain bearing) PK coupling Page Dimensions for GFL - separable flange for version A. Page Dimensions for ISP-B - Inkofix tension flange For version A. Page Questionnaire for quotation purpose Page

3 Technical information INKOMA-PK coupling is available in the following versions: A1 = Basic version: Both outer discs have fixing holes for socket head cap screws for connecting components. The number of fixing holes on pitch circle "C": Links= x Links= x 5 Links= 5 x 2 6 Links= 6 x A2 = Hub version: Both outer discs have machined hubs. A = Tension hub version: Basic version A1 with additional shrink disc. The shrink disc allows keyless fitting to the shaft. For details of the tension flange see page 18. A = Separable hub version: Basic version A1 with additional adaptor flanges. These flanges have hubs for shaft fitting. For details of separable flanges see page 16. A = Split hub version: This hub version has two components - a fixed and a removable part allowing radial clamping to the shaft. This version requires no axial displacement of the shaft for assembly and disassembly. A1 A2 A A1 A2 A Combinations: Each coupling can combine any of these versions. E.g. A1/A2 - one disc with fixing holes and the other with outward facing bored hub. All versions may be combined with one another, e.g. A/A, A1/A, A2/A Special versions: In addition to basic versions, customer specific executions are also possible e.g. incorporating sprocket, gears, shaft, etc. in the outer discs. A A A A Position of the centre disc: X Example: NA.6.0/ Offset Y= 20 mm, L = 6 mm 1 Input L 1 2 x = L Y ( 2 ) 2 ( ) 2 Y Centre disc x = 6 mm ( ) ( ) mm - = 1.9 mm 2 Output L

4 Technical information Notes for installation and operation: The shafts to be connected must have their centre lines parallel to one another. If the specified max. possibible angularity is exceeded the use of an INKOMA-Inkoflex coupling is recommended. (see catalogue Inkoflex couplings). An inclination of the shafts towards each other leads to edge loading of the bearings and premature wear and failure. All have axial freedom: Light series - Plain bearing coupling + 2 mm Standard series - up to size NA 196 ± 2 mm Heavy series - up to size NAS 0 ± mm Ensure that the coupling is not axially tensioned in assembly; the centre disc should feel axially free. Care should be taken to ensure the coupling does not run with the links in tension (stretched). It is possible that the links can be stretched leading to bearing failure. In addition this can lead to the centre disc taking a different sense of rotation when reversing. Max. permitted working offset 0,95 limit of displacement. This should be limited by an end stop. The two outer discs should not be run directly in line. A minimum value of 0, limit of displacement should be maintained. When in line the centre disc is no longer stable. The coupling is supplied ready for use. The needle roller bearings supporting the links are adequately lubricated. Re-greasing can be carried out using grease nipples. Under normal operating conditions the couling is lubricated for life. See page 5 for exceptions. Application examples: There are many applications for the INKOMA-PK coupling. A few typical cases are described below. Drive for rollers: Two related rollers must run synchronously even when the axes are being adjusted for varying products. Haul off: Drives for two haul-off chains used to pull tubes from a process machine. Both chains must run at precisely the same speed and the gap between them must be adjusted to accommodate different tube diameters. Avoidance of conflict: For design reasons the shafts must avoid a conflict. INKOMA-PK coupling provides a simple and space saving solution. Oscilllating drive: INKOMA- are successfully used where both the driving and driven shafts must achieve variations in their position and relationship to each other. To demonstrate the breadth of applications for INKOMA-PK coupling see the following list of machine types.: Filling machines, press lines, printing machines, labelling machines, pleating machines, glass tube drawing, woodworking machines, adhesive sealing machines, roller coating, oscillating drives, paper machinery, roller inspection, actuators, textile machinery, steering systems, packaging machinery, machine tools, cigarette machinery. Despite the most precisie manufacturing procedures and the use of the highest quality materials and bearings a small amount of play is present. In the adjacent diagram empirically derived values for average torsional stiffness are shown. If a complete absence of backlash is demanded we suggest using preloading or drag effects. In most applications the torsional values are adequate. The INKOMA-PK coupling is dynamically balanced and damps and compensates for radial vibrations imposed from outside the drive. 00

5 Technical information Lubrication for PK coupling: The coupling is supplied ready for operation. Re-lubrication can be carried out using the grease nipples fitted to the links. Re-lubrication frequency depends on the grease characteristics (and grease type), operating temperature, speed, load, amount of grease and environmental conditions. These factors must be observed since they can result in considerable differences. Values for relubrication intervals are expressed in the number of operating hours after which topping up or relubrication is required for that situation. Generally it may be assumed that, in normal operating conditions (moderate loading) life time lubrication is provided. Normal lubrication interval tfr for moderate loading (empirically derived values) Operating hours [h] Speed n [1/min] 1 = NA 2 = NA 101 = NA 1 = NA = NA = NA 2 = NAS 8 = NAS 0 Torsional stiffness of the PK coupling for the standard range (empirically derived values) Pre-load 10 Nm to eliminate any play. Torsional displacement [ ] è T max. = % stat Torque T [%] 005

6 Dimensions NA - NA 196 Arrangement and permissible operating range: Driving shaft 2) Driven shaft ) Outer disc (Version A2 with integral hub) ) Centre disc 5) Outer disc (Version A1, for connecting with a separable flange) 6) Separable flange ) Cap head screws DIN 98 and DIN 69 (not supplied) 8) Grease nipple permitted operating range ) -L -L 1 +L 1 -L 2 +L2 +L L 5 1 Input 2 Output -L +L ) ) 8) 5) 6) 2) L 1 L 2 L L L 5 limit of displacement permitted operating range minimum offset max. displacement of centre flange max. tangential working offset Ordering example: PK coupling Axial length based on standard design A1 Limit of displacement Disc diameter Number of links NA. 6. / - A1-A1 Version 006

7 Dimensions NA - NA 196 PK coupling (A1, A2, A, A, A) INKOMA-PK coupling is available in the following versions: B e B H Ø d H Ø C (n x t = ) Ø W H Ø a 2 Ø G Ø a 1 a b P9 A 2 threaded hole A1 A 1 A1 A2 A2 H K H 1 K B Ø W 1 H Ø C M Ø W H A A A A= A1+ISP-B For further details see page 18 tension flenge. H B Ø W H Ø G 1 a Ø G Ø C a M b P9 A threaded hole A A A= A1+GFL For missing dimensions and designations for GFL see page 16. S, M Sp b P9 A A A 00

8 Dimensions NA - NA 196 PK coupling (A1, A2, A, A, A) Dimensions [mm] A 1 A 2 A A A B C D G G 1 H H 1 H K W 2) W 2) 1 a a 1 a 2 b d e ) NA../ NA../ NA..0/6 NA.6.0/ NA.6./ NA.0./ NA.6./ NA.6./5 NA../ NA.6./ NA.0./ NA.6.1/ NA.0.1/ NA..1/ NA / NA / NA 101../ NA / NA / NA / NA / NA / NA / NA / NA / NA / NA 1..10/ NA 1.6.1/ NA 1..1/ NA 1..1/ NA 1.6.1/ NA 1..1/ NA / NA / NA / NA / NA 155../ NA / NA / NA / NA 155../ NA 196../ NA / NA 196../ NA / NA / NA /5 NA /6 NA /6 NA /6 68 ) ) ) 16, 6, ) ) ) 16, 6, , 6, , , , , , ,5 28, , ,5 28, , ,5 28, , ,5 28, , ,5 0 0, , ,5 0 0, , ,5 0 0, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,5 0 0, , ,5 0 0, , ,5 0 0, , ,5 0 0, , ,5 0 0, , , , , , , , , , , , , , , , , , , not fixed axially 2) preferred bore dimension, also available in other diameters ) keyway to BS (DIN 6885/ ) version A not supplied Axial freedom ± 2 mm Special sizes and designs are possible. Please enquire. 008

9 Operational data NA - NA 196 PK coupling (A1, A2, A, A, A) Dimensions [mm] Mounting holes Clamping screw A Operational data limit of displacement permitted operating range minimum offset max. displacement of centre flange max. tangential working offset Thread Number Hole pitch Tightening torque Torque Inertia 5) Mass 5) CAD-No.: L 1 L 2 L L L 5 M n t [ ] S M Sp [Nm] T stat. [Nm] J [kg cm²] [kg] NA../ NA../ NA..0/6 2,5 5,5 8 2,5 5,5 8 2,5 5, M6 M6 M6 6 2xM5 6 2xM5 6 xm5 6 1,2 0, 1 5 1,5 0, , 0,6 NA.6.0/ NA.6./ NA.0./ NA.6./ NA.6./5 NA../ NA.6./ NA.0./ NA.6.1/ NA.0.1/ NA..1/ , , , M8 M8 M8 M8 M8 5 2 M8 M8 M8 M8 M8 M8 xm5 6 xm6 10,5 xm6 10,5 xm6 10,5 xm6 10,5 xm8 xm8 xm8 xm8 xm8 xm8 105,9 0, , , , , , , , , , 11 2,5 18 NA / NA / NA 101../ NA / NA / NA / NA / NA / NA / NA / NA / M M M M M M M M M M M xm8 xm8 xm8 xm8 xm10 xm10 xm10 xm 8 xm 8 xm 8 xm 8, 101 2,0 10, , , , , , , , ,8 11 NA / NA 1..10/ NA 1.6.1/ NA 1..1/ NA 1..1/ NA 1.6.1/ NA 1..1/ M16 M16 M16 M16 M16 M16 M16 xm10 xm10 xm 8 xm 8 xm 8 xm 8 xm , , , , , , , 1519 NA / NA / NA / NA / NA 155../ NA / NA / NA / NA 155../ M16 M16 M16 M16 M16 M16 M16 M16 M16 xm 1 xm 1 xm 1 xm 1 xm 1 xm 1 xm 1 xm 1 xm , , , , , , , , ,9 2 NA 196../ NA / NA 196../ NA / NA / NA /5 NA /6 NA /6 NA / , , , , , , , ,5 1 15, M20 M20 M20 M20 M20 M M20 6 M20 6 M20 6 xm16 xm16 xm16 xm xm xm xm xm xm , , , , , , , , ,0 19 5) for version A1 009

10 Selection table Torque based life selection table Life L [h] h Speed n [1/min] NA../ NA../ NA..0/6 NA.6.0/ NA.6./ NA.0./ NA.6./ NA.6./5 NA../ NA.6./ NA.0./ NA.6.1/ NA.0.1/ NA..1/ NA / NA / NA 101../ NA / NA / NA / NA / NA / NA / NA / NA / NA / NA 1..10/ NA 1.6.1/ NA 1..1/ NA 1..1/ NA 1.6.1/ NA 1..1/ NA / NA / NA / NA / NA 155../ NA / NA / NA / NA 155../ NA 196../ NA / NA 196../ NA / NA / NA /5 NA /6 NA /6 NA /6 Torque T [Nm]

11 Selection table Power based life selection table Life L [h] h Speed n [1/min] NA../ NA../ NA..0/6 NA.6.0/ NA.6./ NA.0./ NA.6./ NA.6./5 NA../ NA.6./ NA.0./ NA.6.1/ NA.0.1/ NA..1/ NA / NA / NA 101../ NA / NA / NA / NA / NA / NA / NA / NA / NA / NA 1..10/ NA 1.6.1/ NA 1..1/ NA 1..1/ NA 1.6.1/ NA 1..1/ NA / NA / NA / NA / NA 155../ NA / NA / NA / NA 155../ NA 196../ NA / NA 196../ NA / NA / NA /5 NA /6 NA /6 NA /6 Power P [kw] B 0,2 0,5 1,2 2,5 0,1 0, 0, 1,6 0,1 0, 0,6 1, 0,09 0,2 0,5 0,9 0, 0,68 1,6,5 0,2 0, 1,0 2,2 0,16 0,5 0,9 1, 0,1 0,28 0,6 1, 0,8 1,6,8 8,2 0,5 1,0 2, 5,0 0, 0,8 1,9,1 0, 0, 1,5, 0,6 1,,0 6, 0, 0,8 1,8,9 0, 0,6 1,5,1 0,2 0,5 1,2 2,5 0,9 1,9, 9, 0,5 1,1 2, 5,8 0, 0,9 2,1, 0, 0,8 1,8,8 0,9 1,9, 9, 0,5 1,1 2, 5,8 0, 0,9 2,1, 0, 0,8 1,8,8 1,2 2,5 5,8, 0, 1,5,6, 0,6 1,2 2,9 6,1 0,5 1,0 2, 5,0 1,,1,2 15,6 0,9 1,9,5 9, 0, 1,6,,9 0,6 1,,0 6, 1,2 2,6 6,0 1,0 0, 1,6, 8,0 0,6 1,,0 6, 0,5 1,1 2,5 5, 1,6,5 8,1 1, 1,0 2,2 5,0 10, 0,8 1,,0 8,6 0, 1,,,1 1,6,5 8,1 1, 1,0 2,2 5,0 10, 0,8 1,,0 8,6 0, 1,,,1 2,1,8 10,8 22,8 1, 2,8 6,5 1,1 1,1 2, 5, 11,5 0,9 1,9, 9, 2,1,8 10,8 22,8 1, 2,8 6,5 1,1 1,1 2, 5, 11,5 0,9 1,9, 9, 2,1,8 10,8 22,8 1, 2,8 6,5 1,1 1,1 2, 5, 11,5 0,9 1,9, 9, 2,1,5 10, 22, 1, 2,8 6, 1,8 1,0 2,2 5,2 11,1 0,8 1,8,2 9,1 2, 5,8 1, 28, 1,6,5 8,2 1, 1, 2,9 6,6 1, 1,1 2, 5, 11,6 2, 5,8 1, 28, 1,6,5 8,2 1, 1, 2,9 6,6 1, 1,1 2, 5, 11,6,6, 1,8 8,8 2,2, 10,9 2, 1,8,8 8,9 19,2 1,,1,2 15,5,,0 16, 5,2 2,0, 10,0 21, 1,6,5 8,2 1,6 1, 2,9 6,6 1,, 9, 21,8 6,9 2, 5,8 1, 28,9 2,2, 10,9 2, 1,8,8 8,8 19,9, 9, 21,8 6,9 2, 5,8 1, 28,9 2,2, 10,9 2, 1,8,8 8,8 19,9,9 8, 19, 2,2 2, 5,1 11,9,6 1,9,2 9,6 20, 1,6,,9 16,8 5,1 11,1,8 55,,2 6,8 15,9,2 2,6 5,5,9 2,8 2,1,5 10,5 22,5 5,1 11,1,8 55,,2 6,8 15,9,2 2,6 5,5,9 2,8 2,1,5 10,5 22,5 5,1 11,1,8 55,,2 6,8 15,9,2 2,6 5,5,9 2,8 2,1,5 10,5 22,5, 10,1 2,,2 2,9 6,2 1, 1,1 2, 5,0 11,,1 2,0,1 9,5 20,, 10,1 2,,2 2,9 6,2 1, 1,1 2, 5,0 11,,1 2,0,1 9,5 20, 5,6,1 28,1,,, 1,2,2 2,8 6,0 1,0 0,1 2,,9 11, 2,5 5,6,1 28,1,,, 1,2,2 2,8 6,0 1,0 0,1 2,,9 11, 2,5 5,6,1 28,1,,, 1,2,2 2,8 6,0 1,0 0,1 2,,9 11, 2,5,5 16,1,,,6 9,9 2,0 9,6, 8,0 18, 0,,0 6,5 15,2 2,,5 16,1,,,6 9,9 2,0 9,6, 8,0 18, 0,,0 6,5 15,2 2, 8, 1,9 1, 89,5 5,1 11,0,1 55,0,1 9,0 20,,0,,2 16, 6,1 11,9 2, 56,5 1,,0 15,0,8 5, 5,,2 28,,9,6 9,9 2,0 9,6 8, 1,9 1, 89,5 5,1 11,0,1 55,0,1 9,0 20,,0,,2 16, 6,1 9, 20,9 8, 10,6 6,0,9 29,8 6,,9 10, 2,1 51,8,9 8,5 19,9 2, 9, 20,9 8, 10,6 6,0,9 29,8 6,,9 10, 2,1 51,8,9 8,5 19,9 2,,9 28,0 6,9 19,8 8,0 1, 9,8 86, 6,8 1,0 2,5 69,1 5,2 11, 26,2 56,5 10,9 2,6 5, 11,8 6,8 1,6,5 2,2 5,5 11,8 2,2 58,1, 9,6 22,0,1 1,6 1,6, 15,0 9,0 19,5 5,0 9,, 15, 6,6 8,5 5,9, 29,8 6, 1,6 1,6, 15,0 9,0 19,5 5,0 9,, 15, 6,6 8,5 5,9, 29,8 6, 15,9,2 9,6 11,2 9,8 21,0 8, 105,2 8,0 1,1 9,8 8,8 6, 1,8 2,5 69,1 15,9,2 9,6 11,2 9,8 21,0 8, 105,2 8,0 1,1 9,8 8,8 6, 1,8 2,5 69,1 21,1 5, 106, 22, 1,1 28,1, 11, 10,6 22,8 52,8 11,6 8,6 18,5 2,9 92,6 28,2,9 11, 0,6 1,,5 86,9 188, 1,1 0,5 0, 152, 11,5 2, 5,6,1 28,2,9 11, 0,6 1,,5 86,9 188, 1,1 0,5 0, 152, 11,5 2, 5,6,1 5, 6,2 16,9,0 21,8,0 108,9,5 1, 8,0 88,5 1,0 1, 0,9 1, 15,9 2, 91,5 2,5 56,9 26,2 56, 10,9 282,6 21, 5, 106, 229, 1,2,1 86, 185, 55,1 118,9 26, 59,6,9, 10,1 6, 2,6 59, 18,2 298, 22, 8,2 1,0 21,8 55,1 118,9 26, 59,6,9, 10,1 6, 2,6 59, 18,2 298, 22, 8,2 1,0 21,8 011

12 Dimensions NA 2 - NAS 0 (heavy series) PK coupling (A1, A2, A, A) INKOMA-PK coupling is available in the following versions: B e +L 1 -L 1 +L 2 -L 2 1 Input 2 Output L 1 limit of displacement L2 permitted operating range L minimum offset L max. displacement of centre flange L5 max. tangential working offset A1 A1 H K B Ø W H Ø a 2 Ø G Ø a 1 Ø C a M Ø d H Ø C (n x t = ) A 1 H B Ø W H Ø G a b P9 b P9 A 2 threaded hole A threaded hole A2 A2 A A A= A1+GFL For missing dimensions and designations for GFL see page 16. H B Ø W H Ø G 1 a -L +L L 5 permitted operating range -L +L S, M Sp b P9 A A A 0

13 Dimensions [mm] A 1 A 2 A A B C D G H K W a a 1 a 2 b d e NA 2.1./ NA 2.1./ NA / NA / NA 2.1.0/ , , , , , NAS.20./ NAS.20./ NAS.20./ 210 NAS.20.5/ NAS.20.5/ NAS / NAS / NAS / NAS / Dimensions [mm] Mounting holes Betriebsdaten limit of displacement permitted operating range minimum offset max. displacement of centre flange max. tangential working offset L 1 L 2 L L L 5 Thread M NA 2.1./ M NA 2.1./ M NA /5 NA / M20 M NA 2.1.0/ M Number n Hole pitch t [ ] Torque T stat. [Nm] Inertia 2) J [kg cm²] Mass 2) [kg] CAD-No.: NAS.20./ NAS.20./ NAS.20./ NAS.20.5/ NAS.20.5/5 NAS / NAS / NAS / NAS / Hub length, diameter, bore and fixing screws to customer requirements 2) for version A1 Axial freedom ± mm Ordering example PK coupling Axial length based on standard design A1 Limit of displacement Disc diameter Number of links NA / - A2-A Version 01

14 Dimensions GLK, GL (light series, plain bearing) PK coupling (GL) K: Centre disc and links in plastic Outer disc in aluminium Grubscrew to DIN 916 or with keyway to BS (DIN 6885/. +L 1 -L 1 +L 2 -L 2 +L -L L 5 L 1 L 2 L L L 5 limit of displacement permitted operating range minimum offset max. displacement of centre flange max. tangential working offset 1 Input 2 Output permitted operating range -L +L B Ø W H A 2 Ordering example: PK coupling Axial length Limit of displacement Disc diameter GLK 2.. / Number of links 01

15 Dimensions [mm] Operational data limit of displacement permitted operating range A 2 B D W L 1 L 2 L L L 5 minimum offset GLK 2../ 2 5, ,6 1, 0,02 0, GLK / 58 11, ,8 8,6 0,56 0,1 005 max. displacement of centre flange max. tangential working offset Torque T stat. [Nm] Inertia J [kg cm²] Mass [kg] CAD-No.: GL 2.0.0/ GL.26.8/ not fixed axially 2 9, ,5,5 5 5,8 0,2 0, ,5 6,8 8,0 0,69 0, Axial freedom +2mm Life L [h] h Speed n [1/min] GLK 2../ GLK / GL 2.0.0/ GL.26.8/ Torque T [Nm] 1, 1, 1,1 0,5 1,8 1,8 0,6 0, 1, 0,9 0, 0, , , 5 1,6 0,8 8,8 2, , , 1, ,6 20,2 2, 11,,6 1, Life L h [h] Speed n [1/min] GLK 2../ GLK / GL 2.0.0/ GL.26.8/ Power P [W] B

16 Dimensions for GFL GFL - separable flange For version A. L H K Ø G Ø W H Ø F h Ø C a M b P9 threaded hole B A n x t = S A A A Ordering example: Separable flange for coupling type Bore diameter Disc diameter GFL / Number of fixing holes 016

17 Dimension [mm] Mounting holes GFL.1./ GFL.1./ GFL.16.0/6 B C D F G H K L W W max. a 2) b 2) M n t [ ] ,2 5 M6 0,5 xm6x10 0, ,2 5 M6 0,5 xm6x10 0, ,2 5 M6 6 1,9 6xM6x10 0,0 002 Thread Number Hole pitch Inertia J [kg cm²] Mounting screws ) S Mass [kg] CAD-No.: GFL.16.0/ GFL../ GFL../ GFL../5 GFL.0./ GFL.0./ GFL.5.1/ 10,5 10,5 10,5 10,5 10,5 10,5 10, , 5 M , 8 M , 8 M , 8 M , 8 M , 8 M , 10 M8 2, 9, 9, 9, xm8x1 xm8x1 xm8x1 5xM8x1 xm8x1 xm8x1 xm8x1 0,6 0,89 0,89 0,89 1, 1, 2, GFL / GFL / GFL / GFL / GFL / GFL / GFL / 15,5 15,5 15,5 15,5 15,5 15,5 15, , 8 M 5 0 5, 8 M 5 0 5, 8 M , 10 M , 10 M , M , M 16 xmx20 xmx20 xmx20 xmx20 xmx20 xmx20 xmx20 DIN 69/ DIN 98 1,15 1,8 1,8 2,5 2,5,, GFL / GFL 1.0.1/ GFL 1.0.1/ 22,5 22,5 22, , 10 M , M , M xm16x0 xm16x0 xm16x0,2,2,2 1 2 GFL / GFL / GFL / GFL / GFL 155../ GFL 155../ , M , M16 5 8,8 1 M16 5 8,8 1 M ,8 1 M ,8 1 M xm16x0 xm16x0 xm16x0 xm16x0 xm16x0 xm16x0,, 6,0 6,0,9, GFL 196../ GFL 196../ GFL / GFL /5 GFL /6 GFL /6 GFL 2../ GFL 2../5 GFL 2..00/5 GFL 2..00/6 GFL 2..0/ ,8 1 M ,8 1 M , 18 M , 18 M , 18 M , 22 M , 22 M , 22 M , 22 M , 22 M , 28 M xm20x5 xm20x5 xm20x5 5xM20x5 6xM20x5 6xM20x5 xm20x 5xM20x 5xM20x 6xM20x 6xM20x DIN 9/ ISO 62 8,5 8,5 1,0 1,0 1,0 2, 0, 0, 58,2 58,2 92, Dimension W for the bore is a preferred value 2) Values for dimension W with key to BS (DIN 6885/ ) Mounting screws are not supplied 01

18 Dimensions for ISP-B ISP-B - Inkofix tension flange For version A. H 2 H 1 H 1 Ø C 2 Ø W H 1 h Ø d H M n x t = Explanation: T stat. = maximum transmissible torque for tension flange F ax = maximum transmissible axial force for tension flange T A = required tightening torque of the tension screws S L = limit of displacement (dependent on the size) 1 A A A Ordering example: Inkofix tension flange ISP Internal diameter W 1 Outer diameter D Number of fixing holes Version ISP / B Ø dh -location diameter

19 Dimensions [mm] Mounting holes Coupling NA..0/6 Tension flange ISP 16.66/6B d C D D 1 D 2 H 1 H 2 H W M n t [ ] M6 6 NA.6.0/ NA.L 1./ NA.6./ NA.6./5 NA../ NA.L 1./ NA.L 1.1/ ISP 16./B ISP.82/B5 ISP.82/B5 ISP.82/5B5 ISP 0.115/B ISP 0.115/B ISP 5.15/B M8 M8 M8 M8 M8 M8 M8 5 2 NA / NA 101.L 1./ NA / NA / NA 101.L 1.10/ NA / NA 101.L 1.1/ ISP 0./B0 ISP 0.110/B ISP 0.110/B ISP 5.10/B ISP 5.10/B ISP 0.1/B ISP 0.1/B M M M M M M M NA 1.L.10/ 1 NA 1.L.1/ 1 NA 1.L.1/ 1 ISP 5.1/B55 ISP 0.15/B ISP 0.15/B M16 M16 M16 NA 155.L.1/ 1 NA 155.L.1/ 1 NA 155.L./ 1 NA / NA / NA 155.L 1./ ISP 0.10/B ISP 0.10/B ISP 5.1/B0 ISP 5.1/B0 ISP./B ISP./B M16 M16 M16 M16 M16 M16 NA 196.L 1./ ISP.185/B NA 196../ ISP.185/B NA 196.L 1.2/ ISP.20/B NA /5 ISP.20/5B NA /6 ISP.20/6B NA 196.L 1.10/6 ISP.2/6B1 1 Dimension W 1 for the bore is a preferred value M20 M20 M20 M20 M20 M Tension screw Operational data Coupling NA..0/6 Tension flange ISP 16.66/6B ISO 01 (DIN 9) xM5x10 Tightening torque T A [Nm] Torque T stat. [Nm] max. axial force F ax [kn] 1 Inertia J [kg cm²] 1, Mounting screws 2) S 6xM6x10 Mass [kg] 0,0 CAD-No.: 2 NA.6.0/ NA.L 1./ NA.6./ NA.6./5 NA../ NA.L 1./ NA.L 1.1/ ISP 16./B ISP.82/B5 ISP.82/B5 ISP.82/5B5 ISP 0.115/B ISP 0.115/B ISP 5.15/B 6xM5x10 8xM5x16 8xM5x16 8xM5x16 8xM5x16 8xM5x16 8xM6x ,,9,9,9 21,5 21,5 68,0 xm8x1 xm8x1 xm8x1 5xM8x1 xm8x1 xm8x1 xm8x1 0,29 0,5 0,5 0,5 1,22 1,22 2, NA / NA 101.L 1./ NA / NA / NA 101.L 1.10/ NA / NA 101.L 1.1/ ISP 0./B0 ISP 0.110/B ISP 0.110/B ISP 5.10/B ISP 5.10/B ISP 0.1/B ISP 0.1/B 8xM5x16 8xM5x16 8xM5x16 8xM6x16 8xM6x16 8xM6x16 8xM6x xmx20 xmx20 xmx20 xmx20 xmx20 xmx20 xmx20 DIN 69/ DIN 98 0,89 1, 1, 2, 2,,, NA 1.L.10/ 1 NA 1.L.1/ 1 NA 1.L.1/ 1 ISP 5.1/B55 ISP 0.15/B ISP 0.15/B 8xM6x16 8xM6x16 8xM6x xm16x0 xm16x0 xm16x0,10,19, NA 155.L.1/ 1 NA 155.L.1/ 1 NA 155.L./ 1 NA / NA / NA 155.L 1./ ISP 0.10/B ISP 0.10/B ISP 5.1/B0 ISP 5.1/B0 ISP./B ISP./B NA 196.L 1./ ISP.185/B NA 196../ ISP.185/B NA 196.L 1.2/ ISP.20/B NA /5 ISP.20/5B NA /6 ISP.20/6B NA 196.L 1.10/6 ISP.2/6B1 2) Mounting screws are not supplied 8xM6x16 8xM6x16 10xM6x16 10xM6x16 10xM6x20 10xM6x20 10xM6x20 10xM6x20 10xM6x20 10xM6x20 10xM6x20 10xM8x xm16x0 xm16x0 xm16x0 xm16x0 xm16x0 xm16x0 xm20x5 xm20x5 xm20x5 5xM20x5 6xM20x5 6xM20x5 DIN 9/ ISO 62,, 6,5 6,5 9,21 9,21 11, 11, 21,2 21,2 21,2 5,

20 Questionnaire for quotation purpose Company:... Department:... Contact:... Date:... Tel.:... Fax.:... Address:... Project:... Operational data: 1 2 Nature of loading P [kw] T [Nm] ED [%] n [1/min] Type of loading: steady variable shock growing vibration Drive: electric motor internal combustion engine other:... Duty:...h/d Required life:...h Operating conditions: Environmental temperature from:... C to... C dry moist dust (state material):... Other unstated operational conditions:... Details of installation: shaft offset: constant L =...mm 2 variable between +L =...mm and -L =...mm 2 2 L = minimum offset Note: Co-axial shaft situations must be avoided. (INKOMA-Lineflex coupling can operate in co-axial situations.) Input Output +L = 2 -L = 2 Angular misalignment: constant =... variable between + =... and - =... L = Type of offset: a) b) c) d) e) f) g) h) i) k) Requirements: Prototype:... Annual requirement:... In deliveries of :... Required delivery: We reserve the right to make technical changes. For current information go to or your local sales office. INKOMA - GROUP Headoffice Neue Reihe D-8 Schandelah Phone: +9/ (0) Fax: +9/ (0) info@inkoma.de 020

Product description. PK couplings

Product description. PK couplings Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment

More information

DRIVE-TECHNOLOGY INKOMA - GROUP. Inkoturn couplings

DRIVE-TECHNOLOGY INKOMA - GROUP. Inkoturn couplings INKOM-GROUPINKOM - DRIVE-TECHNOLOGY GROUP Inkoturn couplings INKOM-GROUP Headoffice Sitz der INKOM Maschinenbau GmbH Neue Reihe 44 D - 3862 Schandelah - Germany phone: +49/(0)5306-922-0 fax: +49/(0)5306-922-50

More information

Inkoturn couplings. INKOMA - GROUP Couplings. Product description. Inkoturn couplings IKT. FRANCIS AND FRANCIS Ltd.

Inkoturn couplings. INKOMA - GROUP Couplings. Product description. Inkoturn couplings IKT. FRANCIS AND FRANCIS Ltd. Product description The INKOM Inkoturn coupling (IKT) is a flexible coupling with high torsional rigidity, which has been developed for applications requiring high speed and where shaft is present. INKOM

More information

DSH screw jack. Product description. DSH screw jack

DSH screw jack. Product description. DSH screw jack Product description DSH screw jack Conventional screw jack applications consist of one or more screw jacks. Usually they are driven by one electric motor and typically connected via drive shafts or couplings

More information

Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Table of Contents Tru-Line Flange-Couplings

More information

LIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm

LIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position.   THE ultimate COUPLING from Nm LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison

More information

TORQLIGHT SAFETY COUPLINGS

TORQLIGHT SAFETY COUPLINGS LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction

More information

KTR Torque Limiters Overload Protection Systems

KTR Torque Limiters Overload Protection Systems KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page

More information

MULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings

MULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings MULTI CROSS RILLO Highly flexible tyre coupling with taper bushings Maschinenfabrik Dipl.-Ing. Herwarth Reich GmbH Vierhausstr. 53 D-44807 Bochum P.O. Box 10 20 66 D-44720 Bochum Tel.: +49 / (0)234 / 959

More information

SCHMIDT-KUPPLUNG GmbH

SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung About us About us In the early 1960s Richard Schmidt developed of propulsion systems for rockets in a zero-gravity environment. Among the possible

More information

Accessories smart additions for efficiency and intelligent performance

Accessories smart additions for efficiency and intelligent performance smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.

More information

TORQUE LIMITER SERIES 600. Airjustor

TORQUE LIMITER SERIES 600. Airjustor TORQUE LIMITER SERIES 600 Airjustor Quality and Autogard are synonymous with overload protection. The Company's reputation for high quality products is derived from over 40 years of design, innovation

More information

PRECISION BELLOWS COUPLINGS

PRECISION BELLOWS COUPLINGS PRECISION BELLOWS COUPLINGS Bellows couplings are used where precise rotation, high speeds, and dynamic motion must be transmitted. They exhibit zero backlash and a high level of torsional stiffness, offering

More information

Standard with cone bushing. Backlash-free Safety Clutch

Standard with cone bushing. Backlash-free Safety Clutch EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC

More information

SGT screw jack. Product description. SGT 5 to SGT 1000 screw jack Both trapezoidal and ball screw versions.

SGT screw jack. Product description. SGT 5 to SGT 1000 screw jack Both trapezoidal and ball screw versions. Product description SGT to SGT screw jack Both trapezoidal and ball screw versions ALBERT-SGT-screw jacks are electromechanical transmission components suitable for a wide spectrum of industrial machinery.

More information

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings

More information

Components for parallel kinematics

Components for parallel kinematics Components for parallel kinematics Series GLK, GLAE Joints and struts form the core components of machines with parallel kinematics (PKM). Irrespective of the control technology possibilities, good mechanical

More information

Shaft Couplings. Edition 2015/2016. Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings. Edition 2015/2016. Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Tru-Line Flange-Couplings

More information

General Purpose Motion Control Couplings

General Purpose Motion Control Couplings General Purpose Motion Control s Sliding Disc (Oldham) Universal ateral (Uni-at) Backlash-free up to 10 8 turns Can tolerate large misalignments Slight damping characteristics Flex-free mechanical action

More information

Flexible Couplings 44

Flexible Couplings 44 Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact

More information

Accessories for screw jacks type SGT

Accessories for screw jacks type SGT Product description Accessories for Albert SGT screw jacks Both trapezoidal and ball screw version The comprehensive range of Albert accessories for screw jacks provides the designer with the means to

More information

! C A U T I O N! Damages on the machine possible.

! C A U T I O N! Damages on the machine possible. 1 The PIK is a connecting element between electro motor and hydraulik pump in combination with an oil - air cooler. General Hints Please read through these mounting instructions carefully before you assemble

More information

Highest Precision: Dyna Series

Highest Precision: Dyna Series Highest Precision: Dyna Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested

More information

TORQUE LIMITER SERIES 200

TORQUE LIMITER SERIES 200 TORQUE LIMITER SERIES 200 Quality and Autogard are synonymous with overload protection. The company's reputation for high quality products is derived from over 40 years of design innovation and production.

More information

Installation and Operational Instructions for ROBA -D Couplings Type 91_. _

Installation and Operational Instructions for ROBA -D Couplings Type 91_. _ Please read the Installation and Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to coupling failure, resulting in damage to other

More information

SCHMIDT-KUPPLUNG GmbH

SCHMIDT-KUPPLUNG GmbH Loewe GK About us Many years of experience For 50 years, we have been advising machine manufacturers as partners for compact coupling systems. Our experience in power transmission has given us extensive

More information

FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores

FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):

More information

For advanced drive technology CLAMPEX. Shaft-Hub-Connection. KTR Precision Joints CLAMPEX

For advanced drive technology CLAMPEX. Shaft-Hub-Connection. KTR Precision Joints CLAMPEX technology CLAMPEX Shaft-Hub-Connection CLAMPEX KTR Precision Joints 07 technology Table of contents Page Brief information 09 Selection and calculation -5 CLAMPEX -Selection Shaft diameter = d 0 10 0

More information

Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48

Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48 Table of contents: Please read and observe this Operating Instruction carefully. A possible malfunction or failure of the clutch and damage may be caused by not observing it. Page 1: - Table of contents

More information

Backlash-free Metal Bellow Couplings

Backlash-free Metal Bellow Couplings Backlash-free Metal Bellow Couplings Edition 3/2008 pioneer in innovation GERWAH pioneer in innovation Future made by GERWAH. Your advantages: The GERWAH name is synonymous with development and manufacturing

More information

Clutch Couplings FW/FWW. Overrunning Ball Bearing Supported, Sprag Clutch Couplings. FW Series. FWW Series. Typical Applications

Clutch Couplings FW/FWW. Overrunning Ball Bearing Supported, Sprag Clutch Couplings. FW Series. FWW Series. Typical Applications s Overrunning Ball Bearing Supported, Sprag s Series For in-line shaft applications Outer race overrunning intermediate speed Inner race overrunning high speed clutch couplings are comprised of an FSO

More information

Schmidt-Kupplung Standard Symbiosis of performance, compact design and generous offset capacity. Schmidt-Kupplung.

Schmidt-Kupplung Standard Symbiosis of performance, compact design and generous offset capacity. Schmidt-Kupplung. SK_S_1/06 Schmidt-Kupplung Standard Symbiosis of performance, compact design and generous offset capacity The Schmidt-Kupplung series Standard S series Symbiosis of performance, compact design and generous

More information

Huco Dynatork Flexible Couplings

Huco Dynatork Flexible Couplings Huco Dynatork Flexible Couplings Flexible Couplings The Company & Its Products Huco products are manufactured in Hertford, England, in a modern plant equipped with all necessary design, development, toolroom

More information

Semiflex Standard Symbiosis of performance and compact design. Semiflex. The Semiflex series

Semiflex Standard Symbiosis of performance and compact design. Semiflex. The Semiflex series SE_S_1/06 compact design The Semiflex series Standard F series Bore diameter up to 120 mm Torque ( ) 44 Nm to 7.040 Nm Semiflex Semiflex is a high-precision coupling in a compact design and with no restoring

More information

Linear Drive with Ball Screw Drive Series OSP-E..SB

Linear Drive with Ball Screw Drive Series OSP-E..SB Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions

More information

Flexible Couplings N-BIPEX Series

Flexible Couplings N-BIPEX Series Flexible Couplings Series /2 Overview /2 Benefits /2 Application /3 Function /3 Design /4 Technical specifications /6 Type BWN /6 Selection and ordering data /7 Spare and wear parts /7 Selection and ordering

More information

DRIVE-TECHNOLOGY INKOMA - GROUP. Accessories for screw jacks type SGT. Maschinenfabrik ALBERT GmbH Technologiepark 2 A Gampern - Austria

DRIVE-TECHNOLOGY INKOMA - GROUP. Accessories for screw jacks type SGT. Maschinenfabrik ALBERT GmbH Technologiepark 2 A Gampern - Austria DRIVETECHNOLOGY ALBERTINKOMA GROUP Accessories for screw jacks type SGT Maschinenfabrik ALBERT GmbH Technologiepark 2 A 81 Gampern Austria phone: +3/(0)76823 fax: +3/(0)7682399 email: office@albert.at

More information

Semiflex Compact Plus For extremely axially limited space. Semiflex. The Semiflex series

Semiflex Compact Plus For extremely axially limited space. Semiflex. The Semiflex series SE_CP_1/06 The Semiflex series Standard F series Symbiosis of performance and compact design Bore diameter up to 120 mm Torque ( ) 44 Nm to 7.040 Nm Semiflex Semiflex is a high-precision coupling in a

More information

Reducing Backlash / Increasing Rigidity Jaw Coupling Precision Jaw Oldham Helical Beam Disc coupling

Reducing Backlash / Increasing Rigidity Jaw Coupling Precision Jaw Oldham Helical Beam Disc coupling Precision Couplings A shaft coupling is a critical element in a robust and durable linear shaft drive. Misalignment of motor and drive shafts can cause loss of precision, noise and premature failure. By

More information

Candy Coup-Link OVER YEARS OF INNOVATION

Candy Coup-Link OVER YEARS OF INNOVATION Candy Coup-Link Zero-backlash, flexible-shaft couplings High torque, excellent response Accommodates misalignment and shaft endplay Aluminum and stainless steel options Inch and metric bores available

More information

Locking Assemblies Shrink Discs Rigid Couplings.

Locking Assemblies Shrink Discs Rigid Couplings. M I N I Locking Assemblies Shrink Discs Rigid Couplings www.mav.it our company We are an Italian company world renowned for our creativity and ethics. Established in 1989 we have rapidly built a reputation

More information

In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide

In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide External Clamping devices Overview 3073 Mini-Range For very low torque transmission Very small profile

More information

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...

Contents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview... SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...

More information

Standard model for offset drives by chainwheel, sprocket or gear. Chain coupling adaptor for in-line drives, simple & compact

Standard model for offset drives by chainwheel, sprocket or gear. Chain coupling adaptor for in-line drives, simple & compact Type DSF/EX friction torque limiters Friction torque limiters are simple low cost devices that remove shock loads and protect machinery from overload damage. Easy torque setting and wide torque range Bi-directional

More information

Single direction thrust ball bearings Double direction thrust ball bearings

Single direction thrust ball bearings Double direction thrust ball bearings Thrust ball bearings Single direction thrust ball bearings... 838 Double direction thrust ball bearings... 839 Bearing data general... 840 Dimensions... 840 Tolerances... 840 Misalignment... 840 Cages...

More information

Bellows Page 415. Overview Universal Joints. Single Universal Joints. Speeds* max. min

Bellows Page 415. Overview Universal Joints. Single Universal Joints. Speeds* max. min Overview Universal Joints Single Universal Joints Type UKM GF KE WEL RW AR WE WEN WER Material Plastic Plastic Stainless STAINLESS Bearings Bores mm 2-10 8-16 0-40 6-30 6-45, hardened 6-30, hardened 6-40

More information

Series 54 and S54 Resilient Couplings

Series 54 and S54 Resilient Couplings Series 54 and S54 Resilient s Bibby Transmissions Resilient s Bibby are the world originator of the resilient grid type shaft coupling, which is universally accepted by engineers to be one of the most

More information

High Performance: Dyna-Lite Series

High Performance: Dyna-Lite Series High Performance: Dyna-Lite Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna-Lite Series gearboxes to meet your needs. Page 4 provides a list of commonly requested

More information

Torsionally elastic couplings

Torsionally elastic couplings Torsionally elastic couplings Torsionally elastic couplings Industrial Brakes Thrusters Pressure Oil Pumps Couplings Hydraulic Buffers Cellular Buffers Rail Pliers Sheaves Hook Blocks Crane Rail Wheels

More information

RIGIFLEX -N RADEX -N. Steel laminae coupling. Steel laminae coupling. You will find continuously updated data in our online catalogue at

RIGIFLEX -N RADEX -N. Steel laminae coupling. Steel laminae coupling. You will find continuously updated data in our online catalogue at 117 Table of contents 117 Coupling selection steel laminae coupling 119 Description of coupling 121 General information 122 Types and applications 123 Technical data 124 Standard types 126 Special types

More information

Highest Performance: Dyna Series

Highest Performance: Dyna Series Highest Performance: Dyna Series The Dyna Series is our highest performance right-angle gear reducer utilizing sophisticated hypoid gearing. The benefit of hypoid gearing is that it combines the space

More information

Length: L. Outer Dia. : D. Bore 2: d2. Bore 1: d1. BF Series

Length: L. Outer Dia. : D. Bore 2: d2. Bore 1: d1. BF Series Page 1 BF Jaw Coupling Surface Finish Available Body Sleeve Body Sleeve Aluminium Alloy Polyurethane Anodic oxidation None Clamp Screw Coupling assembled by pressing a polyurethane sleeve into hubs on

More information

High Performance: EPR Series

High Performance: EPR Series High Performance: EPR Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPR Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications

More information

(d) Bore Size Check from Dimensions table (page 112) that chosen flanges can accommodate required bores.

(d) Bore Size Check from Dimensions table (page 112) that chosen flanges can accommodate required bores. Fenaflex Couplings The Fenaflex coupling is a highly flexible, torsionally elastic coupling offering versatility to designers and engineers with a choice of flange combinations to suit most applications.

More information

Highest Precision: Dyna Series

Highest Precision: Dyna Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page 3 provides a list of commonly requested modifications to give you

More information

Comparison Chart. extremely difficult. Finally, separated components can rarely be re-used.

Comparison Chart. extremely difficult. Finally, separated components can rarely be re-used. JAN 2014 Traditional Connections Why Go Keyless Keyed Bushing Systems Both QD and Taper-Lock bushing and weld-on hub systems are popular component mounting technologies. Yet both are ultimately keyed connections

More information

MINIATURE METAL BELLOWS COUPLINGS

MINIATURE METAL BELLOWS COUPLINGS VRSATIL AND PRCIS. K SRIS MK 0.05 10 Nm MINIATUR MTAL BLLOWS COUPLINS TH ULTIMAT COUPLIN FROM 0.05 10 Nm BACKLASH FR MINIATUR BLLOWS COUPLINS MODLs PROPRTIS APPLICATION examples MK1 with radial set screws

More information

Standard model for offset drives by chainwheel, sprocket or gear. Chain coupling adaptor for in-line drives, simple & compact

Standard model for offset drives by chainwheel, sprocket or gear. Chain coupling adaptor for in-line drives, simple & compact Type DSF/EX friction torque limiters Friction torque limiters are simple low cost devices that remove shock loads and protect machinery from overload damage. Easy torque setting and wide torque range Bi-directional

More information

Crossflex Disc Couplings

Crossflex Disc Couplings Crossflex Disc flexible shaft couplings provide reliable and accurate transmission of mechanical power for applications requiring low maintenance and no lubrication. The couplings are particularly suited

More information

TORQUE LIMITERS SERIES 100

TORQUE LIMITERS SERIES 100 TORQUE LIITERS SERIES 100 Engaged Engaged TORQUE LIITER FOR SERVO DRIVES BACKLASH FREE Quality and Autogard are synonymous with overload protection. The company s reputation for high quality products is

More information

Roller chain idler sprocket units Idler pulley units

Roller chain idler sprocket units Idler pulley units Roller chain idler sprocket units Idler pulley units Roller chain idler sprocket units, idler pulley units Page Product overview Roller chain idler sprocket units, idler pulley units... 334 Design and

More information

technology made in Italy

technology made in Italy technology made in Italy GB RD * * VS made in China Technology Made in Italy Since 1955 Varvel has been making speed reducers and variators for light industry applications. Reliable partner in power transmission

More information

Torsionally Rigid Disc Couplings

Torsionally Rigid Disc Couplings US 05 2016 Torsionally Rigid Disc Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission RINGFEDER POWER TRANSMISSION We say what we

More information

Bell-house Mounted Arrangement. Highly Flexible K Coupling

Bell-house Mounted Arrangement. Highly Flexible K Coupling Bell-house Mounted Arrangement. Highly Flexible K Coupling K Couplings for bell-house mounted arrangements are the only coupling type providing a blind assembly connection. They are specially designed

More information

BACKLASH FREE AND STANDARD JAW COUPLING

BACKLASH FREE AND STANDARD JAW COUPLING BACKLASH FREE AND STANDARD JAW COUPLING Up to 9.600 Nm of torque and 130 mm bore GAS/SG e GAS 25 Technology for Safety GAS/SG-ST - backlash free jaw coupling «in steel»: introduction Made in steel fully

More information

Description Symbol Definition or explanation Rated torque T KN Torque that can continuously be transmitted over the entire permissible speed range

Description Symbol Definition or explanation Rated torque T KN Torque that can continuously be transmitted over the entire permissible speed range Coupling selection Normally the is selected according to the nominal torque ( ) shown in the list of technical data, like all other coupling systems. In all cases the torque ( ) must exceed the maximum

More information

TORSIONALLY RIGID COUPLING

TORSIONALLY RIGID COUPLING TORSIONALLY RIGID COUPLING Up to 130.000 Nm of torque and 205 mm bore GTR 7 Technology for Safety GTR - torsionally rigid coupling: introduction Made in steel fully turned with standard treatment of phosphating.

More information

MINIATURE METAL BELLOWS COUPLINGS

MINIATURE METAL BELLOWS COUPLINGS VRSATIL AND PRCIS. MINIATUR MTAL BLLOWS COUPLINS SRIS MK 0.05 10 Nm TH ULTIMAT COUPLIN FROM 0.05 10 Nm BACKLASH FR MINIATUR BLLOWS COUPLINS MODLS PROPRTIS APPLICATION XAMPLS MK1 with radial set screws

More information

CLAMP AND FLANGE COUPLINGS

CLAMP AND FLANGE COUPLINGS POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly

More information

SIZES FROM ,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS

SIZES FROM ,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS LP SIZES FROM 350 20,000 Nm TORSIONALLY STIFF DISC PACK COUPLINGS GENERAL INFORMATION ABOUT R+W DISC PACK COUPLINGS: SERVICE LIFE R+W disc pack couplings are fatigue resistant and wear free for an infinite

More information

CLASSIFICATION OF ROLLING-ELEMENT BEARINGS

CLASSIFICATION OF ROLLING-ELEMENT BEARINGS CLASSIFICATION OF ROLLING-ELEMENT BEARINGS Ball bearings can operate at higher speed in comparison to roller bearings because they have lower friction. In particular, the balls have less viscous resistance

More information

heet: 1 of 22 Backlash-free, torsionally stiff and maintenance-free coupling Type with setscrew Type with clamping hubs Type KN (Taper hubs) Type M with setscrew Type M with clamping hubs Type PI 11-3379-883

More information

CENTAMAX -B. Torsionally soft couplings with precompression for independently mounted units on rigid or soft mounts. Catalog CM-B-E-06-04

CENTAMAX -B. Torsionally soft couplings with precompression for independently mounted units on rigid or soft mounts. Catalog CM-B-E-06-04 Torsionally soft couplings with precompression for independently mounted units on rigid or soft mounts Catalog CM-B-E-06-04 Power Transmission Leading by innovation For many years we have been supplying

More information

Torque Limiter 320 Series Overview. Torque Limiter 320 Series

Torque Limiter 320 Series Overview. Torque Limiter 320 Series Torque Limiter 0 Series Overview Torque Limiter 0 Series Torque Limiter 0 Series For more than 80 years, Autogard products have led the industry in overload protection with high-quality products, design

More information

1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7

1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7 Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z

More information

US Nor-Mex. Elastomer Jaw Couplings. Partner for Performance

US Nor-Mex. Elastomer Jaw Couplings. Partner for Performance US 11 2015 Nor-Mex lastomer Jaw Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today s RINGFDR POWR TRANSMISSION GMBH was founded

More information

FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores

FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):

More information

TYPE TSC/TLC T SERIES FLEXIBLE DISC COUPLINGS

TYPE TSC/TLC T SERIES FLEXIBLE DISC COUPLINGS TYPE TSC/TLC A Stainless steel flexible discs B Overload collars C Cartridge transmission unit D Anti-fly feature E Anti-corrosion treatment F Hubs with API puller holes G Robust hub bolt H Large shaft

More information

FLEXIBLE AND TORSIONALLY RIGID. THE ULTIMATE COUPLING BELLOWS COUPLINGS. SERIES BK 15 10,000 Nm.

FLEXIBLE AND TORSIONALLY RIGID. THE ULTIMATE COUPLING BELLOWS COUPLINGS. SERIES BK 15 10,000 Nm. FLEXIBLE AND TORSIONALLY RIGID. THE ULTIMATE COUPLING BELLOWS COUPLINGS SERIES BK 15 10,000 Nm TORSIONALLY STIFF METAL BELLOWS COUPLINGS Areas of application: Servo drives CNC axes Robotic axes Manipulators

More information

TOOLFLEX Operating-/Assembly Instructions

TOOLFLEX Operating-/Assembly Instructions D-807 Rheine heet: 5810 EN 1 of 19 Backlash-free, torsionally stiff and maintenance-free coupling is a backlash-free, torsionally stiff and maintenance-free metal bellow-type coupling designed to be used

More information

SIZES FROM 1,950-25,000 Nm BACKLASH FREE ELASTIC JAW COUPLINGS

SIZES FROM 1,950-25,000 Nm BACKLASH FREE ELASTIC JAW COUPLINGS K Z SIZS FROM 1,950-25,000 Nm BCKLSH FR LSTIC JW COUPLINGS LSTOMR COUPLINGS K Z Optional: GNRL INFORMTION BOUT R+W LSTOMR COUPLINGS: SRVIC LIF When properly selected, handled, and installed, these couplings

More information

Shrink Discs, Smart-Lock & Shaft Couplings

Shrink Discs, Smart-Lock & Shaft Couplings RINGFEDER Products are available from MARYLAND METRICS Shrink Discs, Smart-Lock & Shaft Couplings US 08 2009 Partner for performance RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261

More information

MAIN SHAFT SUPPORT FOR WIND TURBINE WITH A FIXED AND FLOATING BEARING CONFIGURATION

MAIN SHAFT SUPPORT FOR WIND TURBINE WITH A FIXED AND FLOATING BEARING CONFIGURATION Technical Paper MAIN SHAFT SUPPORT FOR WIND TURBINE WITH A FIXED AND FLOATING BEARING CONFIGURATION Tapered Double Inner Row Bearing Vs. Spherical Roller Bearing On The Fixed Position Laurentiu Ionescu,

More information

Highest Performance: Dyna Series

Highest Performance: Dyna Series Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module

More information

Group 078

Group 078 1-078-080111 Group 078 EUROTEC TIRE COUPLINGS American Metric s eurotec tire couplings provide all the desirable features of an ideal flexible coupling, including Taper Lock installation. The eurotec tire

More information

High Performance: EPL Series

High Performance: EPL Series High Performance: EPL Series GAM can. If you don t see exactly what you need, let us know. We can modify the EPL Series gearboxes to meet your needs. Page 4 provides a list of commonly requested modifications

More information

RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2

RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2 RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2 1 Ringfeder Corporation Catalog W-300-1 Shaft-Hub Locking Devices Ringfeder unique frictional, keyless

More information

Electromagnetic clutch-brake combinations INTORQ

Electromagnetic clutch-brake combinations INTORQ Electromagnetic clutch-brake combinations INTORQ 14.800 14.867 7.5 120 Nm setting the standard 2 CBC en 5/2005 Contents Clutch-brake combinations Product information 4 Type code 6 Design selection 8 Overview

More information

COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS

COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications

More information

SKF Disc Couplings. Selection

SKF Disc Couplings. Selection SK Disc Couplings The SK disc coupling is the ideal solution in medium to high applications that require torsional rigidity, offer some allowance for misalignment, and do not require lubrication. These

More information

RING-flex. Torsionally Rigid Disc Couplings US Partner for performance 1. RINGFEDER Products are available from MARYLAND METRICS

RING-flex. Torsionally Rigid Disc Couplings US Partner for performance 1. RINGFEDER Products are available from MARYLAND METRICS RINGFEDER Products are available from MARYLAND METRICS RING-flex Torsionally Rigid Disc Couplings US 008 Partner for performance RINGFEDER Products are available from MARYLAND METRICS P.O. Box 6 Owings

More information

Mönninghoff electromagnetic tooth clutches

Mönninghoff electromagnetic tooth clutches Mönninghoff electromagnetic tooth clutches High torque without slip in compact size Angular synchronisation of input to output possible Torque limiting and other special tooth options readily available

More information

Backlash-free safety couplings. Backlash-free safety couplings. Product information. Optimal safety has a name: Guaranteed by two systems:

Backlash-free safety couplings. Backlash-free safety couplings. Product information. Optimal safety has a name: Guaranteed by two systems: ;;Engaged ;;Engaged Backlash-free safety couplings Product information Optimal safety has a name: Backlash-free safety couplings Guaranteed by two systems: ;;;; Locking Locking element - cylinder roller

More information

ROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free

ROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free MOTORBASES Self-Tensioning Motor Mount for Belt Drives without slippage self-adjusting maintenance-free Technology Tensioning Motorbase Type MB for Belt Drives The elastic tensioning motorbase type MB,

More information

Components for parallel kinematics

Components for parallel kinematics Components for parallel kinematics Series GLK, GLK 2, GLK 3 and GLAE Parallel kinematic components consist of a number of parallel, longitudinally adjustable mechanical struts that are arranged between

More information

https://amironic.co.il/ COUPLINGS Oldham Lateral Offset Coupling Set Screw Fixing : Blind Hub : Nm : 2-20mm Bores

https://amironic.co.il/ COUPLINGS Oldham Lateral Offset Coupling Set Screw Fixing : Blind Hub : Nm : 2-20mm Bores BG COUPINGS Oldham ateral Coupling Set Screw Fixing : Blind : 0.7-57 : - 0 Bores ØA BG BG9 BG3 BG9 BG5 BG33 BG33S BG BG BG9 BG3 BG9 BG5 BG33 BG33S BG 0 0 0 0.00 Deg/ 5.700.900 0.0 0.0 0.0 /rad 0 30 5 5

More information

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions 1 of 17 is a torsionally rigid flange coupling. It is able to compensate for shaft misalignment, for example caused by manufacturing inaccuracies, thermal expansion, etc. BoWex FLE-PA BoWex FLE-PAC Drawn:

More information

Chapter 11. Keys, Couplings and Seals. Keys. Parallel Keys

Chapter 11. Keys, Couplings and Seals. Keys. Parallel Keys Chapter 11 Keys, Couplings and Seals Material taken for Keys A key is a machinery component that provides a torque transmitting link between two power-transmitting elements. The most common types of keys

More information

Highest Precision: SPL Series

Highest Precision: SPL Series Highest Precision: SPL Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the SPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested

More information