BMT 65 TOOLING BENZTOOLING.COM
|
|
|
- Joseph Wells
- 6 years ago
- Views:
Transcription
1 BMT 65 TOOLING BENZTOOLING.COM
2 Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s Page 7 & 8 Offset Radial Live s Page 8 & 9 Dual Spindle Radial Live s Page 10 Adjustable Angle Live s Page 11 Static s Page Optional Body Type Examples MAIL@BENZ-INC.COM
3 BENZ Provides Many Options to Match Your Needs SPINDLE VARIATIONS AND CLAMPING SYSTEMS MULTIPLE BODY STYLES BENZ Solidfix BENZ CAPTO Radial Drilling and Milling Head Swivel Head Collet Chuck System DIN 6499 Collet Chuck System DIN 6388 KM Radial Drilling and Milling Head with Two Spindles with Fixed Angle License KOMET Milling Arbor Radial Drilling and Milling Head Offset Inside Milling Head Weldon Whistle-Notch HSK Form A+C Axial Offset Axial BENZTOOLING.COM 2
4 BMT Quick Change Options BENZ CAPTO BENZ Solidfix Easy Handling Optical visible clamping position 100 Clamping position from 75 Starting torque 50 (C4) Technology at its Highest Level Coromant Capto clamping system as per ISO-Norm Higher clamping force Savings Modular system requires fewer live tools in your inventory saving thousands per Solidfix Setup time reduction up to 90% Performance Compact design Large multi-surface contact High torque Balanced design for high speed High concentricity.00019" s can be preset for fast exchange Handling Quick change in 15 seconds Safe one-hand operation 180 bayonet-style lock feature Ejection feature No screws to lose Safety Adapter will not drop out of the spindle Safe one-hand operation allows the operator to stay balanced when changing tools One T-handled Allen wrench instead of collet wrenches that can slip and cause operator injury MAIL@BENZ-INC.COM
5 LinA Broach Broaching, I.D. & O.D. Splines, Hex, Key Ways & Torx The BENZ LinA Broach changes the rotary motion of the live tool turret into a linear motion for innovative broach and spline machining on your lathe Position Z axis to the start position, program a constant X feed until the proper broach depth has been achieved. 800 rpm = 800 strokes per minute Manufacturing of I.D. & O.D. profiles is easy and less abusive on your lathe. The LinA utilizes an integrated lifting feature to lift the tool off of the material on the return stroke for better surface finish and tool life A B Broach a Keyway 5mm deep F=40mm/min in 7.5 seconds. L1 L 1 2 S RADIAL Additional specifications can be found on page BENZTOOLING.COM 4
6 Axial BMT 65 ER Collet Chuck D A A1 114DA12700E6A Collet ER32 6,000* 1: : EA12700E6A Collet ER32 6,000* 1: = Internal coolant, 50 micron filtration is required with this option Axial BMT 65 BENZ Solidfix Quick Change D A A1 114DA12700S4 BENZ Solidfix S4 6,000* 1: EA12700S4 BENZ Solidfix S4 6,000* 1: = Internal coolant, 50 micron filtration is required with this option Axial BMT 65 BENZ CAPTO TM Quick Change D A A1 114DA12700L4BD BENZ CAPTO TM C4 6,000* 1: EA12700L4BD BENZ CAPTO TM C4 6,000* 1: = Internal coolant, 50 micron filtration is required with this option *4,500 rpm continuous, 6,000 rpm (for 2 minutes, 8 minutes rest) MAIL@BENZ-INC.COM
7 Offset Axial BMT 65 ER Collet Chuck D A A1 L1 114DM12781E6A Collet ER32 6,000* 1: DI12781E6A Collet ER32 4,500/9,000* 1:2 50/ Offset Axial BMT 65 BENZ Solidfix Quick Change D A A1 L1 114DM12781S4D BENZ Solidfix S4 6,000* 1: DI12781S4D BENZ Solidfix S4 4,500/9,000* 1:2 50/ Offset Axial BMT 65 BENZ CAPTO TM Quick Change D A A1 L1 114DM12781L4BD BENZ CAPTO TM C4 6,000* 1: DI12781L4BD BENZ CAPTO TM C4 4,500/9,000* 1:2 50/ *4,500 rpm continuous, 6,000 rpm (for 2 minutes, 8 minutes rest) BENZTOOLING.COM 6
8 Radial BMT 65 ER Collet Chuck D A B L L1 114FAX12749E6AD-72 Collet ER32 6,000* 1: FAX12749E6AD-85 Collet ER32 6,000* 1: FAX12749E6AD-100 Collet ER32 6,000* 1: GAX12749E6AD-72 Collet ER32 6,000* 1: GAX12749E6AD-85 Collet ER32 6,000* 1: GAX12749E6AD-100 Collet ER32 6,000* 1: Radial BMT 65 BENZ Solidfix Quick Change D A B L L1 114FAX12749S4D-72 BENZ Solidfix S4 6,000* 1: FAX12749S4D-85 BENZ Solidfix S4 6,000* 1: FAX12749S4D-100 BENZ Solidfix S4 6,000* 1: GAX12749S4D-72 BENZ Solidfix S4 6,000* 1: GAX12749S4D-85 BENZ Solidfix S4 6,000* 1: GAX12749S4D-100 BENZ Solidfix S4 6,000* 1: *4,500 rpm continuous, 6,000 rpm (for 2 minutes, 8 minutes rest) MAIL@BENZ-INC.COM
9 Radial BMT 65 BENZ CAPTO TM Quick Change D A B L L1 114FAX12749L4BD-72 BENZ CAPTO TM C4 6,000* 1: FAX12749L4BD-85 BENZ CAPTO TM C4 6,000* 1: FAX12749L4BD-100 BENZ CAPTO TM C4 6,000* 1: GAX12749L4BD-72 BENZ CAPTO TM C4 6,000* 1: GAX12749L4BD-85 BENZ CAPTO TM C4 6,000* 1: GAX12749L4BD-100 BENZ CAPTO TM C4 6,000* 1: mm Offset Radial BMT 65 ER Collet Chuck D A B L L1 114GBX12749E6AD-72 Collet ER32 6,000* 1: FBX12749E6AD-85 Collet ER32 6,000* 1: FBX12749E6AD-100 Collet ER32 6,000* 1: GBX12749E6AD-72 Collet ER32 6,000* 1: GBX12749E6AD-85 Collet ER32 6,000* 1: GBX12749E6AD-100 Collet ER32 6,000* 1: *4,500 rpm continuous, 6,000 rpm (for 2 minutes, 8 minutes rest) BENZTOOLING.COM 8
10 35mm Offset Radial BMT 65 BENZ Solidfix Quick Change D A B L L1 114FBX12749S4D-72 BENZ Solidfix S4 6,000* 1: FBX12749S4D-85 BENZ Solidfix S4 6,000* 1: FBX12749S4D-100 BENZ Solidfix S4 6,000* 1: GBX12749S4D-72 BENZ Solidfix S4 6,000* 1: GBX12749S4D-85 BENZ Solidfix S4 6,000* 1: GBX12749S4D-100 BENZ Solidfix S4 6,000* 1: = Internal coolant, 50 micron filtration is required with this option 35mm Offset Radial BMT 65 BENZ CAPTO TM Quick Change D A B L L1 114FBX12749L4BD-72 BENZ CAPTO TM C4 6,000* 1: FBX12749L4BD-85 BENZ CAPTO TM C4 6,000* 1: FBX12749L4BD-100 BENZ CAPTO TM C4 6,000* 1: GBX12749L4BD-72 BENZ CAPTO TM C4 6,000* 1: GBX12749L4BD-85 BENZ CAPTO TM C4 6,000* 1: GBX12749L4BD-100 BENZ CAPTO TM C4 6,000* 1: = Internal coolant, 50 micron filtration is required with this option *4,500 rpm continuous, 6,000 rpm (for 2 minutes, 8 minutes rest) MAIL@BENZ-INC.COM
11 Dual Radial BMT 65 ER Collet Chuck D A B L L1 114FAX12749E6A2-72 Collet ER32 6,000* 1: FAX12749E6A2-85 Collet ER32 6,000* 1: FAX12749E6A2-100 Collet ER32 6,000* 1: Dual Radial BMT 65 BENZ Solidfix Quick Change D A B L L1 114FAX12749S42-72 BENZ Solidfix S4 6,000* 1: FAX12749S42-85 BENZ Solidfix S4 6,000* 1: FAX12749S BENZ Solidfix S4 6,000* 1: Dual Radial BMT 65 BENZ CAPTO Quick Change D A B L L1 114FAX12749L4BD2-72 BENZ CAPTO TM C4 6,000* 1: FAX12749L4BD2-85 BENZ CAPTO TM C4 6,000* 1: FAX12749L4BD2-100 BENZ CAPTO TM C4 6,000* 1: *4,500 rpm continuous, 6,000 rpm (for 2 minutes, 8 minutes rest) BENZTOOLING.COM 10
12 BMT 65 Adjustable Angle D F L L1 114FDX12739E3A Swiveling +/- 105 ER16 6,000* 1: / GDX12739E3A Swiveling +/- 105 ER16 6,000* 1: / FK12738E3 Swiveling +/- 105 ER16 4,000/8,000* 1:2 16/8-65 +/ A B L L1 S BMT 65 BENZ LinA Broach Keyway, Hex, Spline & Torx * I.D. & O.D. broaching with one tool utilizing CW & CCW spindle direction. S = Usable Stroke D A B L L1 114FSS12749F8D-72 16mm Weldon.669" 1,200 1: FSS12749F8D-85 16mm Weldon.669" 1,200 1: FSS12749F8D mm Weldon.669" 1,200 1: FS12749F8D-72 16mm Weldon 1.259" 1,000 1: FS12749F8D-85 16mm Weldon 1.259" 1,000 1: FS12749F8D mm Weldon 1.259" 1,000 1: FSL12749F8D-72 16mm Weldon 2.007" 750 1: FSL12749F8D-85 16mm Weldon 2.007" 750 1: FSL12749F8D mm Weldon 2.007" 750 1: holders and inserts available from PH Horn MAIL@BENZ-INC.COM
13 BMT 65 O.D. Static 1" Turning Capacity Reversible 114A Axial Turning 1.000" Yes BMT 65 O.D. Static 1" Turning Capacity Reversible 114A Axial Turning 1.000" Yes BMT 65 O.D. Static 1" Dual Turning Capacity Reversible 114A Axial Turning 1.000" Yes BENZTOOLING.COM 12
14 BMT 65 I.D. Static 1" Turning Capacity Reversible 114A Radial Turning 1.000" Yes BMT 65 Static 1.5" Boring 72mm Centerline Capacity Reversible Height Length 114A " Boring 1.000" Yes 105mm 111mm Includes seal plate for internal coolant BMT 65 Static 1.5" Boring 62.5 Centerline Capacity Reversible Height Length 114A " Boring 1.000" Yes 95mm 111mm Includes seal plate for internal coolant
15 BMT 65 Static Capacity Reversible Height Length 114A " Boring 1.000" Yes 105mm 111mm Includes seal plate for internal coolant Solidfix Reducing Sleeve for Drill & Boring Applications Solidfix ID ø B S4 S " B S4 S " Reducing Sleeve Reducing Sleeve and Solidfix Adapter Installed Solidfix ER Collet Adapters Solidfix S4 Collet Nut Collet Range Wrench E4A12 ER20 Internal 2-13 B136-E4AX E5A20 ER25 Internal 2-16 B136-E5AX E639 ER32 External 2-20 B136-E6 Solidfix Internal Collet Chuck Solidfix External Collet Chuck BENZTOOLING.COM 14
16 BENZ Select Line Angle Heads Packaged for Performance Value to Increase Profits. REQUEST A QUOTE TODAY! BENZTOOLING.COM mail@benz-inc.com th Street Court SE Hickory, NC Sold and Serviced by
BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret.
BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret www.benztooling.com March 2015 Table of Contents Live Tools ST 10 (Y) ST 20 (Y) ST25 (Y) ST 30 (Y) ST 35 (Y) DS 30 (Y) ST 20 SS (Y) ST 30 SS (Y) DS
HURCO VDI40 TOOLING FOR HURCO
HURCO VDI40 TOOLING FOR HURCO Tae of Contents Quick Change Tooing Page 4 LinA Broach Page 5 Axia Page 6-8 Raia Page 7-9 Ajustae Ange Page 9 Static Toos Page 10-18 Accessories Page 19-21 2 Mouar esign for
July 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
July 2017 TOOLING FOR GENOS L300/L3000 BMT. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR July 2017 GENOS L300/L3000 BMT www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest
July 2018 ONLY FOR LU3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LU3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest
April 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 MULTUS U3000/U4000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
August 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA August 2018 MULTUS U3000/U4000/U5000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the
July 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
Driven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
October 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR October 2017 LB2000/LB3000 M/MY/MYW www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
April 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe
Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
Alberti LIVE TOOLS 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Alberti
Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»
» Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting
Clamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
BMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
About Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
Toolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
Tradition in Perfection.
Angular Heads Tradition in Perfection. For more than 50 years the name ROMAI has stood for the highest precision and process reliability in machining. The next generation begins today. We have succeeded
BEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 Includes Tools 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Lathe Tooling
GTS SERIES. Twin Spindles & Turrets CNC Turning Centers
GTS SERIES Twin Spindles & Turrets CNC Turning Centers GTS series GTS series Twin Turrets TWIN SPINDLES & TURRETS CNC TURNING CENTER General Features Accessories & Applications Designed for simultaneous
GTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
TOOLING FOR SWISS-TYPE CNC MACHINES. Celebrating. 15 Years. Version 10.17
Celebrating 15 Years TOOING FOR SWISS-TYPE CNC MACHINES Tooling Tooling For For Swiss-Type Swiss-Type CNC CNC Machines Version 10.17 Machines Introduction... Genevieve Swiss Industries, Inc. brings to
ANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
DOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
Alberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com STRAIGHT 90 DUAL OUTPUT
Výhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)
HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16
Alberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30
350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &
Quick change for vertical lathes
Quick change for vertical lathes VTL brochure_a4_v4.indd 1 Machine utilization Metal cutting efficiency Vertical turning lathes, or VTLs, are one of the most traditional machine types, table diameters
E3000 SERIES CONTROL UNIT
ispeed E E BRUSHLESS MOTOR & SPINDLE SERIES Modular Type (ø mm),~, min- (rpm) Maximum Output W Motor speed is displayed accurately on the front panel. Auto or Manual Control Modes. Can be installed on
Features Benefits. Toolholders. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and part number.
Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 00/ISO 400. Marking Type and part number. Traceability Lot number marking on all products for traceability through the
EVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
BORING SYSTEMS INFO. 3 nd edition
BORING SYSTEMS INFO 3 nd edition April 25 TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY TECHNOOGY FOR HIGH PRECISION Ingersoll
Designed for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
GMS SERIES Tool Spindle Type 5-axis Turning Centers
GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide
We set the standard for the highest precision and most advanced technology in the machine tool accessory market
ANGLE HEADS heimatec GmbH-Renchen, Germany Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility, on 7.5 acres, is home to over 100
Coromant U. Indexable insert drill DRILLING. A productivity tool for cost efficient hole production. Drill adaptor for silent drilling E 53
Coromant U Indexable insert drill General Turning A productivity tool for cost efficient hole production Designed with optimal flute area for max chip flow Chip evacuation optimized for high metal removal
High Performance Vertical Turning Center
High Performance Vertical Turning Center The vertical turning center is designed for long term accuracy, heavy duty cutting and to minimize floor space. Its powerful spindle drives, meehanite casting and
CTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
Driven Toolholders for HAAS Machines
riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool
ER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
BEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
Collet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
ANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
enduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
Tooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
Typhoon L Series CNC Turning Centres
Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal
cost-effective automation
cost-effective automation compact units for drilling tapping milling www.e2systems.com AIR HYDRAULIC DRILLING UNIT BE(FP)22 AIR HYDRAULIC DRILLING UNIT BE(F) 22 The basic design of the BE(F) 22 consists
Universal. CNC Turning machine TNA500 TNA600
Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time
HIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
CAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
PERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36
MLB610 Line Boring Machine Rev 1.0 Page 1 of 9 DESCRIPTION A versatile and modular line boring machine offering a choice of electric, hydraulic and pneumatic boring bar drive motors, with a mechanical
FEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES
FEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES The Supertec GU CNC series are designed for grinding complex workpieces in small and large batch productions as well as individual parts. It is built
Taper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
Radial Drilling And Milling Heads TYPE HAAS
Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106
KTA SPINDLE TOOLINGS
Price INR R 2013 KTA SPINDLE TOOLINGS SILVER SERIES PRECISION TOOL HOLDERS FOR CNC MACHINES HSK DIN 69893-1 FORM A Features : Special Material with Tensile NEW 2 strength inthe Core Min 950 N/mm. Case
Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation
Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation General The Eltool Livetool Angle Heads can provide years of service if properly used and maintained. The Livetool uses
Collet Chuck manual 08/2010
Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back
SHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
Typhoon B Series CNC Turning Centres
Typhoon B Series CNC Turning Centres www.colchester.co.uk Typhoon B Series CNC Turning Centres The Typhoon B Series constructed from a one piece cast, base incorporates FEM analysis to achieve an optimal
LM5200 milling machine
LM5200 milling machine 2013 10 LM52 Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). The Climax LM5200 Milling
GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
SPRINT linear Series. Highly productive automatic turning with linear Direct Drives
www.dmgmori.com SPRINT 20 8 linear SPRINT 42 8 linear SPRINT 42 10 linear SPRINT 32 / 42 linear CLASSIC Highly productive automatic turning with linear Direct Drives Series Applications and parts Machine
Tooling technology. Angle Heads METAL MACHINING.
Tooling technology Angle Heads META MACHINING AT BENZ WERKZEUGSYSTEME, OUR MAXIM, INNOVATION. PRECISION. PASSION. IS FAR MORE THAN JUST A MARKETING FORMUA. RATHER, IT DESCRIBES THE CORE GOAS OF OUR BUSINESS
FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
ROYAL LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
ROYAL LOW-PROFILE ACCU-LENGTH High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because they are
Table of Contents. To place an order, please contact: Keith Clendenin; cell ph. (860)
Rev. Date 5/10/2016 Table of Contents Standard Products...3 Back Working Drill Holders...4 Bar Feed Brackets...5 Reducer Bushings...6 Chucker Kits...8 Coolant/Air Blast Manifolds...9 Thru-Coolant ER Collet
UNIVERTOR A. Pick-up-turning centre. The systems supplier for manufacturing technology from one source
The systems supplier for manufacturing technology from one source A flexible pick-up turning system for small, medium and large-volume production UNIVERTOR A Pick-up-turning centre Pick-up-turning procedure
Quick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
CNC swiss and non-swiss. turning center TNL32
CNC swiss and non-swiss turning center TNL32 Thanks to the outstanding technical features of the TRAUB TNL32 CNC swiss and non-swiss turning center, you will notice measurable improvements in production.
powrgrip for mold & die Trustworthy toolholding solutions
powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and
MULTITURRET BAR TURNING B436Y2
MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model
FOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
HIGH TORQUE LIVE TOOLS
HIGH TORQUE LIVE TOOLS Mori Seiki NLX 4000 High Torque Live Tools Fax: (847) 367-4815 Email: inquiries@lyndexnikken.com Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com
TOOLING FOR SWISS-TYPE CNC MACHINES. Ver
TOOLING FOR SWISS-TYPE CNC MACHINES www.genswiss.com Ver. 12.11 Introduction... Genevieve Swiss Industries provides tools & accessories unique to Swiss-Type Machining and Small Parts Manufacturing. Our
PRECI-FLEX. The Flexible Tool System
PRECI-FLEX The Flexible Tool System EXSYS Tool, Inc. T:800.397.9748 F:800.397.9739 P:352.588.4345 www.mazaktooling.com CONTACT INFORMATION TABLE OF CONTENTS Main Distribution for USA Mexico Canada Repair
ACTUATING Standard programme TOOLTRONIC and facing heads
84 ACTUATING Standard programme TOOLTRONIC and facing heads ACTUATING Standard programme TOOLTRONIC and facing heads 85 85 Standard programme TOOLTRONIC / facing heads FACING HEADS Facing heads are used
ER System The pioneering toolholding system. Product catalog
ER System The pioneering toolholding system Product catalog Company profile Providing solutions for cutting-edge toolholding Three systems one brand 4 Wet and dry machining 6 Special solutions: recool
Standard Programme Clamping Technology. The tool specialists for the trade.
Standard Programme Clamping Technology The tool specialists for the trade. Direction Leipzig 4 Direction Dresden Direction Erfurt Chemnitz 72 95 The tool specialists for the trade. WTE Präzisionstechnik
Compatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
PHONE /
WESCON DSI DESIGNED SOLUTIONS INCORPORATED AIRFRAME ASSEMBLY TOOLS AND RELATED SERVICES PHONE 949.444.3807 / info@wescondsi.com 20551 PASCAL WAY LAKE FOREST, CA 92630 USA "DESIGNED SOLUTIONS" With over
Accessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
LM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
Product information PI Disk-type tool turret
Product information PI 43.2 Disk-type tool turret without tool drive Series 0.5.440.xxx with tool drive Series 2017-05-31 0.5.433. / 436.xxx 0.5.435.xxx Table of Contents PI 43.2 Disk-Type Tool Turret
1 Collets and collet sleeves
1 1.3 Wibemo - Honing sleeve 1.4 Wibemo - Extenso collets 1.6 Wibemo - Croco collets 1.10 Wibemo - CuBe collets 1.11 Wibemo - Phenol collets 1.12 Custom made collets 1.18 Wibemo - Wifex collets 1.22 Tornos
DRIVEN and STATIC TOOLING For EMAG
1019 BERGIN RD. HOWELL, MI 4884 PHONE : 877-91-TOOLS ( 810-6-4446 ) FAX: 877-9-TOOLS ( 810-6-4467 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com DRIVEN and STATIC TOOLING For EMAG Live Tooling
1000 SERIES VERTICAL GRINDING MACHINES
Product Catalog Vertical Grinders 1000 SERIES VERTICAL GRINDING MACHINES The CGC Model 1000 is the core of Campbell Grinder Company s modular machine philosophy. High performance, reliability, and v ersatility
HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE
HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE HACKSAW MACHINE Coolant System Hydraulic Feeding Quick Clamping Vise Saw Size 14 Cutting Cap. 7 Saw Size 18 Cutting Cap. 10 Blade 10 KW1500415 CIRCULAR
MCC Engineered Accessories. Designed for CITIZEN Machines
MCC Engineered Accessories Designed for CITIZEN Machines Specially Engineered Accessories for Cincom & Miyano Marubeni Citizen-Cincom Inc. provides innovative solutions to the problems faced in the automatic
Patented AirShield Technology. Sentry Belt-Driven Spindles. C017 Cartridge Spindle B035, B040, B050, B070 & B090 Block Spindles
Patented AirShield Technology Sentry Belt-Driven s C017 Cartridge B035, B040, B050, B070 & B090 Block s Sentry Precision s Value-Priced Sentry Precision Belt-Driven s The Sentry line is our standard building
CAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
series PUMA V8300 series High Productivity 15" Vertical Turning Center PUMA V8300 PUMA V8300M PUMA V8300-2SP PUMA V8300M-2SP ver.
High Productivity 15" Vertical Turning Center M -2SP M-2SP ver. EN 171011 SU Product Overview Basic Information Performance Detailed Information Options Applications Diagrams Specifications Customer Support