Bottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
|
|
- Abigayle Short
- 5 years ago
- Views:
Transcription
1 Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color Overview. V L ottom view (Nominal) Straight running belt Nominal pitch: 50.0 mm (1.97 in) Surface type: Flat Surface opening: Closed ackflex radius: 75.0 mm (3.00 in) in diameter: ø8 mm (1.97 in) *uni-chains recommends this travel direction. owever, travel in both directions is possible. mm in mm in V L lternative materials: elt: OM-LF, OM-SLF,, E, 6.6 and 6.6 Rodlock: Endlock: G and E elt width Lockpin: E 6.6 N ermissible tensile force (elt/pin material) in: E SS304 and SS316 elt weight (elt/pin material) OM-D/6.6 /6.6 E/6.6 OM-D/6.6 /6.6 E/6.6 mm in N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry **Return itch 50.0 mm/1.97 in STRIGT RUNNING NON Standard dditional standard belt widths are available in steps of mm (5.96 in.) dditional non-standard belt widths are available in steps of 33.5 mm (1.32 in.) dditional standard belt widths are available in steps of mm (5.96 in.) dditional non-standard belt widths are available in steps of 33.5 mm (1.32 in.) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% R. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: OM 2500 N (562 lbf), 1200 N (270 lbf), E 500 N (270 lbf) **Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in.)
2 Datasheet: uni O 4V C Rubber Top Flat D Rib E F C Curved Rib elt Material & color Rubber Material & color C D E F Link idth mm in mm in mm in mm in mm in mm in size mm in Flat Rib Curved Rib Flight OM-LF R OM-D 03 N OM-D 03 K Other Non Standard Rubber profiles: See uni Rubber rofile Overview K Non Stick Non Stick/Support Ribs Non Stick Non Stick/Support Ribs Recommended Material & color idth Indent Link size mm in mm in mm in Non Stick Non Stick/ Support Ribs Non Standard material and color: See uni Material and Color Overview. K
3 Datasheet: uni O 4V C Side Guard D* D* C E* E* Recommended Material & color C D* E* mm in mm in mm in mm in mm in Closed * Min. indent Increment : 8.4 mm (0.33 in) Note: ackflex radius when side guard are used: mm (7.90 in) Non Standard material and color: See uni Material and Color Overview. Tab K J G Recommended Material & color G J K mm in mm in mm in mm in OM-D ottom old Down OM-LF Non Standard material and color: See uni Material and Color Overview. Non Standard uni mflight Travel direction rinciple sketch Other Non Standard option: See uni mflight Overview.
4 Datasheet: uni O 4V C Sprocket No of teeth ilot ore in mm ore size Overall diameter itchdiameter ubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded 6 LG Machined 6 N Z06 x x x Z08 x x x Z10 x x x Z12 x x x Z13 x x x Z x x Z16 x x x Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet idth of tooth = 11.0 mm (0.43 in) idth of sprocket = 42.3 mm (1.67 in) Max load per sprocket shown does not take bore size into account. lease also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni O. For more detailed sprocket information, contact Customer Service.
5 Datasheet: uni O 4V Rough lastic Modular elt Series uni O 4V Rough Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color Overview. V L ottom view (Nominal) Straight running belt Nominal pitch: 50.0 mm (1.97 in) Surface type: Rough Top Surface opening: Closed ackflex radius: 75.0 mm (3.00 in) in diameter: ø8 mm (1.97 in) *uni-chains recommends this travel direction. owever. travel in both directions is possible. mm in mm in V L lternative materials: elt: OM-LF, OM-SLF,, E, 6.6 and 6.6 Rodlock: Endlock: G and E elt width Lockpin: E 6.6 N ermissible tensile force (elt/pin material) in: E SS304 and SS316 elt weight (elt/pin material) OM-D/6.6 /6.6 E/6.6 OM-D/6.6 /6.6 E/6.6 mm in N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry **Return itch 50.0 mm/1.97 in STRIGT RUNNING NON Standard dditional standard belt widths are available in steps of mm (5.96 in.) dditional non-standard belt widths are available in steps of 33.5 mm (1.32 in.) dditional standard belt widths are available in steps of mm (5.96 in.) dditional non-standard belt widths are available in steps of 33.5 mm (1.32 in.) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% R. For exact belt width contact Customer Service. Non standard belt width on request. *Max. Load per Drive Sprocket. elt material: OM 2500 N (562 lbf), 1200 N (270 lbf), E 500 N (270 lbf) **Max. Spacing between wear strips, Carry: 152 mm (6 in.) ; Return: 304 mm (12 in.)
6 Datasheet: uni O 4V Rough Tab K J G Recommended material & color G J K mm in mm in mm in mm in OM-D ottom old Down OM-LF OM-D Non Standard material and color: See uni Material and Color Overview.
7 Datasheet: uni O 4V Rough Sprocket No of teeth ilot ore in mm ore size Overall diameter itchdiameter ubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded 6 LG Machined 6 N Z06 x x x Z08 x x x Z10 x x x Z12 x x x Z13 x x x Z x x Z16 x x x Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet idth of tooth = 11.0 mm (0.43 in) idth of sprocket = 42.3 mm (1.67 in) Max load per sprocket shown does not take bore size into account. lease also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni O. For more detailed sprocket information, contact Customer Service.
8 Datasheet: uni O 4V Vacuum EN lastic Modular elt Series uni O 4V Vacuum Recommended belt material & color * OM-D Recommended pin and lock 6.6 N material & color Non standard material and color: See uni Material and Color Overview. V L ottom view (Nominal) Straight running belt Nominal pitch: 50.0 mm (1.97 in) Surface type: Flat Surface opening: ø5.5 mm (0.22 in) ackflex radius: 75.0 mm (3.00 in) in diameter: ø8 mm (1.97 in) *uni-chains recommends this travel direction. owever. travel in both directions is possible. mm in mm in V L lternative materials: elt: OM-LF, OM-SLF,, E, 6.6 and 6.6 Rodlock: Endlock: G and E elt width Lockpin: E 6.6 N ermissible tensile force (elt/pin material) in: E SS304 and SS316 elt weight (elt/pin material) OM-D/6.6 /6.6 E/6.6 OM-D/6.6 /6.6 E/6.6 mm in N lbf N lbf N lbf kg/m lb/ft kg/m lb/ft kg/m lb/ft *Min. No. drive sprocket per shaft Number of wear strips (Min. No.) **Carry **Return itch 50.0 mm/1.97 in STRIGT RUNNING NON Standard dditional standard belt widths are available in steps of mm (5.94 in.) dditional non-standard belt widths are available in steps of 33.6 mm (1.32 in.) dditional standard belt widths are available in steps of mm (5.94 in.) dditional non-standard belt widths are available in steps of 33.6 mm (1.32 in.) General belt tolerance is +0/-0.4% at 23 C/73 F and 50% R. For exact belt width contact Customer Service. Non standard belt width on request *Max. Load per Drive Sprocket. elt material: OM 2500 N (562 lbf), 1200 N (270 lbf), E 500 N (270 lbf) **Max. Spacing between wear strips, Carry: 152 mm (6 in) ; Return: 304 mm (12 in) = Single Link
9 Datasheet: uni O 4V Vacuum Tab K J G Recommended material & color G J K mm in mm in mm in mm in OM-D ottom old Down OM-LF Non Standard material and color: See uni Material and Color Overview.
10 Datasheet: uni O 4V Vacuum Sprocket No of teeth ilot ore in mm ore size Overall diameter itchdiameter ubdiameter -dimension -dimension mm in mm in mm in mm in mm in Single row/two way Double row/two way Molded 6 LG Machined 6 N Z06 x x x Z08 x x x Z10 x x x Z12 x x x Z13 x x x Z x x Z16 x x x Non standard material and color: See uni Material and Color Overview. Other sprocket sizes are available upon request. Two-part sprocket are available upon request. Round bores are always delivered with keyway. Other bore sizes are available upon request. uni Retainer Rings: See uni Retainer Ring data sheet idth of tooth = 11.0 mm (0.43 in) idth of sprocket = 42.3 mm (1.67 in) Max load per sprocket shown does not take bore size into account. lease also ensure that sufficient size shaft is chosen for corresponding load. For correct sprocket position: See uni ssembly Instructions for uni O. For more detailed sprocket information, contact Customer Service.
POM-DI/PP PP/PP PE-I/PE POM-DI/PP PP/PP PE-I/PE
Datasheet: uni M C EN lastic Modular elt Series uni M C L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: Closed ackflex radius: 65.0 mm (2.6 in) in diameter:
More informationT L. P (Nominal) L Belt weight (Belt/pin material) POM-LF/PA6.6 PP/PA6.6 POM-LF/PA6.6 PP/PA6.6
Datasheet: uni Light 18% Plastic Modular elt Series uni Light 18% Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color
More informationP (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
More informationBottom view. (Nominal) L S Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.
Datasheet: uni O 8 20% lastic Modular elt Series uni O 8 20% belt * OM-D pin and lock Non standard material and color: See uni Material and Color Overview. V L ottom view S (Nominal) Straight running belt
More information(Nominal) L Belt weight (Belt/pin material)
N lastic Modular elt Serie uni M-TT 37% elt material & color W OM-D W in material & color W 6.6 lternative pin material: 6.6 W elt width ermissible tensile force (Nominal) L T Straight Running Nominal
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and olor Overview. lternative pin and lock materials:
More informationP (Nominal) L Belt weight (Belt/pin material) PP/PP PE-I/PE PP/PP PE-I/PE
Datasheet: uni M 16% EN lastic Modular elt Series uni M 16% L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Flat Surface opening: 16% ackflex radius: 65.0 mm (2.60 in) in diameter:
More informationPOM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA
Datasheet: uni SN M2 20% EN lastic Modular elt Series uni SN M2 20% elt material & color OM-D W E N E in material & color W E N Non standard material and color: See uni Material and Color Overview. lternative
More informationP (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft
Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.
More informationT L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile
More informationT L. (Nominal) L S POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
Datasheet: uni Light Plastic Modular elt Series uni Light Recommended elt material & color Recommended Pin material & color POM-D W P6.6 Non standard material and color: See uni Material and Color Overview.
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 28% lastic Modular Belt Serie uni Light E 28% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationT L POM-LF/PP PP/PP PA6/PBT-GR POM-LF/PP PP/PP PA6/PBT-GR
Datasheet: uni Light C Plastic Modular elt Series uni Light C elt material & color POM-LF R PP W PP P6 Pin and lock material & color PP W PP W PP Non standard material and color: See uni Material and Color
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni CN C page 3-6 uni CN 18% page 7-10 uni CN 22% page 11-14 Datasheet: uni CN C EN
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni M-TT 37% page 3-6 uni M-TT CS 37% page 7-10 Datasheet: uni M-TT 37% N Plastic Modular
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular
More informationPOM-SFL/PP POM-EC/PP
elt material & color OM-SF W G E OM-E in material & color W E N Non standard material and color: See uni Material and olor Overview. Alternative pin and lock materials: Solid ockpin: A6.6 D ockpin: G A6.6
More information(Nominal) Belt weight (Belt/pin material)
Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 Datasheet: uni QN EN Plastic Modular elt Series
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni S-MP C page 3-6 uni S-MP CS 22% page 7-10 uni S-MP N page 11-14 Datasheet: uni
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni C 2% Rough (POM NL) page 3-6 uni C 2% Rough (POX -FR) page 7-10 uni C Rough (POM
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni XL M2 C page 3-6 uni XL M2 Rough page 7-10 uni XL M2 15% Rough page 11-14 uni XL
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationuni Flex L-ASB Sideflexing
uni Flex LS 83 itch 50.8 (2.00 ) uni Flex LS his new generation of 2 pitch radius belts with or without hold down tabs offers a unique patenteddesign making this an extremely strong radius belt. version
More informationuni MPB Straight running
87 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt
More informationuni MPB Straight running
88 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt
More informationuni CSB The versatile plastic modular belt for the Automotive Industry
uni CSB The versatile plastic modular belt for the Automotive Industry The next generation of plastic modular belts for Automotive Introduction of a new innovative product: uni CSB Ammeraal Beltech is
More informationThe uni SNB M2 belt increases performance in the following industries/applications:
uni S M2 ew generation 38 itch 25.4 (1.00 ) uni S M2 the unique Open op and Rib op elt he new uni S M2 20% (Closed hinges) offers improved cleanability combined with high strength properties. he flat surface
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni X-MPB C page 3-4 Datasheet: uni X-MPB C EN Plastic Modular Belt Series uni X-MPB Type C Running
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni OWL 66% page 3-4 Datasheet: uni OWL 66% Plastic Modular Belt Series uni OWL Type 66% Belt material
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationMATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
More informationRexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
More informationCONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationPROLINK ENGINEERING MANUAL
EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,
More informationEnergy Chain Systems E2 medium
Energy Chain Systems E2 medium E2 medium Series // Series 26/27/27i Series 340/350* *Extender chain 2 parts per link, maximum Easy installation Many connection options Long service life High stability
More informationAdvised minimum width SLIDING ROLLERS SERIES 20
Pitch Drive system Belt width Advised minimum width Rod diameter 20 mm Central Multiples of 8 mm 120 mm Ø 4.6 mm FLAT TOP FLUSH GRID RAISED RIB FRICTION TOP SLIDING ROLLERS TRIAN SERIES 20 SERIES 20 SERIES
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT
More information2250 FT FLAT TOP BELTS (Pitch mm)
220 FT FLAT TOP BELTS (Pitch 1-2.4 ) 8 2.4 4.3 Version standard Backflex radius: 2 Max load capacity: 2.000 N/m eight: 9.30 Kg/m 2 FOR BELTS AVAILABLE IN MATERIAL JUST ADD TO PART NUMBER (EXAMPLE CODE
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationuni-chains Belt Systems
unichains Belt Systems Guarantee unichains guarantees for one year against defects caused by faults in design, production or material. 2002, unichains A/S. Copying or reproduction of this catalogue is
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationRexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
More informationOffset Link L2 L1. SK1 Attachment
tandard ouble itch hain ouble itch tandard ouble itch hain has the same basic construction as standard roller chain, but chain pitch is twice as long, and the chain has flat-shaped link plates. his series
More informationEXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 14. siegling prolink modular belts. 11/17 (Ref-No. 888) Straight running belts Pitch 12.7 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 11/17 (Ref-No. 888) SERIES 14 Straight running belts Pitch 12.7 (0.50 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49
More informationOmni-Pro 075. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 075 USA and
More informationCOMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation...
COMPANY PROFILE Welcome to our Bluebelt profile page, and thank you for taking the time to read about us. Our company was founded in 1999 by Christopher Dale, and over the past 12 years has become a leading
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N USA and International
More information1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
More informationSqueeze Action Plier Clamps
7.7 Series 460, 480 Product Overview Drop forged alloy steel components for exceptional strength Two way trigger release allows for fast and easy opening of clamp Welding 462 462-2 463 480 482 With Two
More informationOmni-Pro 120. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 120 USA and
More informationGates Poly Chain GT 2 Sprocket Specifications
Gates Poly Chain GT 2 Specifications 2D and 3D Drawings are available at www.gates.com/designview 64 Gates Corporation www.gates.com/pt Stock 8mm Gates Poly Chain GT 2 Specifications of Teeth Pitch O.D.
More informationuni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written
More informationFMB-DDSP Belt for High Load and Low Load Pulleys
FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International
More informationSPROCKETS AND PLATEWHEELS DESIGNED FOR ROLLER CHAINS
AND DEIGNED FOR ROLLER The range of sprockets and wheels designed for chains manufactured by our Company provides an all-round solution to the needs of industry in the sector of flexible mechanical transmissions
More information3.25, 4.5, 7.5 Tabletop Conveyor Specifications
3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder
More informationmk Roller Conveyors mk Conveyor Technology 240
mk Roller Conveyors mk Conveyor Technology 240 Contents mk Roller Conveyors RBS-P 2065/2066 242 RBS-P 2255 246 RBT-P 2255 250 RBM-P 2255 254 Rollers 258 Application Examples 260 mk Conveyor Technology
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationRex 880 TableTop Chain Side-flexing
Prefix S D WD FR HP WHP LF WLF MR P DUV BWR PS WX 880 Cha Information Cha M. Sideflex pproximate desc /ft / m 31/4 3.2 6 18.00 47. 2 60 89 41/2 4.0 3 00 609. 6 70 1.04 Cha ntistatic Pla cetal Pla cetal
More informationRexnord 880 TAB TableTop Chain
880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/4 3.25 82.6
More informationBEARING GUIDE. Bearing Guide Created by REV Robotics 2016, Licensed Under CC BY-SA 1
fg BEARING GUIDE This guide is intended as a reference on how to build with the new REV Robotics 15mm Building System using bearings and brackets to achieve basic motion. Bearing Guide Created by REV Robotics
More informationDesign Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More informationEXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) SERIES 13 Straight running belts Pitch 8 (0.31 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49 511
More informationRex 812 TableTop Chain with Rubber Inserts Straight Running
Prefix SSR 812 Cha is shown Staless Steel with Rubber Insert (SSR) material. Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82. 6 - - 1.89 2.80 Cha Material Staless Steel with Rubber
More informationSeries R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]
Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5
More informationSqueeze Action Plier Clamps
7.1 N[lbf.] Maximum Clamping Thickness mm [inch] Series Section.Page 0 to 1000 [0 to 225] 1000 to 2000 [225 to 450] 2000 to 3000 [450 to 675] 3000 to 4000 [675 to 900] 4000 to 5000 [900 to 1125] 5000 to
More informationThe right chain! High Performance from Rexnord. Rotary chains. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Rotary chains Highly robust and durable Rotary chains High Performance from Rexnord. Link cranked shape Roller Shock-resistant, seam-free Bush High surface hardness, hard
More informationModel 104 Slider Belt Conveyor
Model 104 Slider Belt Conveyor Model Description: The Model 104 Slider Bed Belt is designed with the systems approach in mind. The square head and tail end terminals allow you the flexibility to combine
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Guide Rings page 3-4 uni Retainer Rings page 5-6 uni Idler page 7-8 atasheet:
More informationE2 mini Series 10 Introduction
E2 mini Series Introduction 18 Stable and cost-effective Mounting bracket with strain relief option One-piece design, non snap-open Lightweight and stable Large pin for high stability When to use the Series
More informationTORQUE HTD - CMT MUSTANG 8M - 14M SYNCHRONOUS BELT - CHD CMT APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
TORQUE HTD - CMT Performance index These heavy-duty synchronous belts are specifically designed for high torque applications at low speed. TORQUE belts are among the best performing HTD profiled belts
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationNylon Cable Chains Light Series
s Light Series Series S00 page 40 Series S50L-S50LI-S50LE page 4 Series S0090-S0091-S009 page 44 Series S5LI/LE page 46 Series S5L page 48 Series S5L-S5LI-S5LE page 50 Series S9 page 5 Channel guide for
More informationKISSsoft Tutorial 012: Sizing of a fine pitch Planetary Gear set. 1 Task. 2 Starting KISSsoft
KISSsoft Tutorial: Sizing of a fine pitch Planetary Gear set KISSsoft Tutorial 012: Sizing of a fine pitch Planetary Gear set For Release: 10/2008 kisssoft-tut-012-e-sizing-of-planetary-gear-set.doc Last
More informationATC / ATB Series AT Clutches and Brakes
ATC / ATB Series AT Clutches and Brakes Rugged, Durable, Heavy Duty Clutches and Brakes Warner Electric s AT clutches and brakes are rugged and durable. The ATC and ATB incorporate a molded friction material/pole
More informationROLLER LUBRICANT VISCOSITY RATING
CHAIN INFORMATION OUTER PLATE OUTER PLATE PIN 2 PIECES OF EACH MAKE AN OUTER LINK BUSH INNER PLATE INNER PLATE 2 PIECES OF EACH MAKE AN INNER LINK ROLLER AMERICAN BRITISH Lubrication (Dependent on power
More informationCLASSICA Imperial pitch - CD MXL - XL - L - H - XH SYNCHRONOUS BELT - - CHD CD APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
CLASSICA Imperial pitch - CD Performance index The CLASSICA synchronous belt, being designed with imperial pitch, is a valid and economical alternative solution in low/medium torque transmission systems.
More informationPLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
More informationMS02 - MSE02 HYDRAULIC MOTORS
MS02 - MSE02 HYRAULIC MOTORS T E C H N I C A L C A T A L O G Hydraulic motors MS02 - MSE02 new generation OCLAIN HYRAULICS CHARACTERISTICS Motor inertia Noise emissions = 0.01 kg.m² = 60 dba Theoretical
More informationPRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
More informationElectric Chain Hoists. CLF & CLW Series. The New CLF Series: Reliable, safe, convenient, efficient and compact size
Industrial Cranes Customized Cranes Light Crane Systems Crane Components Electric Wire Rope Hoists Electric Chain Hoists Spare Parts Electric Chain Hoists CLF & CLW Series The New CLF Series: Reliable,
More informationBelt Conveyor System. The Just-in-Time (JIT)
24 8 The Just-in-Time (JIT) Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery,
More informationRoller chains TPM - QRC pag. 40 Roller chains RCX pag. 43 Conveyor chains CRT pag. 45 Chain guide rails in polyethylene pag. 48
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationConveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More informationNew Standard Power Transmission
ew Standard ower ransmission lame ut Sprockets S has series of engineered conveying sprockets and matching conveying chains of different varieties. We manufacture engineered sprockets with and without
More informationELATECH flat belts. Pulleys. Belt storage. TP (Total Protection) Belts. Belt installation. Belt life. Belt fastening guidelines F1 F2 F2,5 F3
ELATECH flat belts Pulleys Belt storage Belt installation TP (Total Protection) Belts Belt life Belt fastening guidelines F1 F2 F2,5 F3 a b p s d Bolt R (Radius) F1 F2 F2,5 F3 D F1 1 ELATECH M and V Type
More information