ODU-MINI-SNAP. Series F - IP50 and IP68 FP-Locking Concept Keying with Halfshells. Series F

Size: px

Start display at page:

Download "ODU-MINI-SNAP. Series F - IP50 and IP68 FP-Locking Concept Keying with Halfshells. Series F"

Charleen White
6 years ago
Views:

1 OU-MINI-SNAP Series - IP and IP68 P-Locking oncept Keying with Halfshells Series

2 OU-MINI-SNAP Series The Push-Pull Locking Principle: P Locking roove onical Sleeve Locking ingers Outer Housing Back Nut Receptacle Plug OU-MINI-SNAP connector in unmated condition. OU-MINI-SNAP connector in mated condition. Pulling on the cable or on the back nut causes the locking fingers to grip tighter into the groove inside the receptacle. A separation is virtually impossible. Pulling on the outer plug housing disengages the locking fingers from the receptacle groove and the connector separates easily. Page 8 OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

3 Series OU-MINI-SNAP OU-MINI-SNAP with P-Locking Scheme in ross Section able ollet Nut OU-MINI-SNAP Plug Shield Locking Ring EMI Ring Back Nut Single onductor Inner Housing Half Shells Lamella ontacts Locking inger Insulator uide Ring Outer Housing Hex Nut onical Sleeve Locking roove ontacts Press Ring Insulator Housing OU-MINI-SNAP Receptacle OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page 9

4 OU-MINI-SNAP Series Available Housing Sizes (Scale : ) O = Outside iameter (Plug) S = Size O: 9, 8 S:. Page OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

5 Series OU-MINI-SNAP The Type = Receptacle K = In-Line Receptacle S = Straight Plug W = Right-Angle Plug. Style - 9 and A - Z X = Special. Size - and A - Z A =,. Series. oding (Page 8) 6. Material/Surface - Housing (Page 8) 7. empty 8. Material - Insulator (Page 9) ontact Insert (Page -6) e.g. 8-way = 8. ontact Type/Surface (Page 9). ontact iameter (Page 9) M = mixed arrangement. +. Term. ross Section (Page ). for special ontact onfigurations 9. empty ollet System (Page ) able Bend Relief olor/material (Page ) Example: T 6 L Receptacle - Style - Size - Series - oding - Brass matt chromate Housing - PBT Insulator - 6pos. - Socket(solder),7 µm Au -Term. ross Section AW S P 6 M 7 E P Plug - Style - Size - Series - oding - Brass matt chromate Housing - PEEK Insulator - 6pos. - Pin (solder),7 µm Au - Term. ross Section AW - able iameter Blue able Bend Relief - Material PUR OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page

6 B OU-MINI-SNAP Series S S S S Straight Plug - IP with Standard Back Nut - IP with Back Nut for able Bend Relief - IP 68 watertight with Standard Back Nut - IP 68 watertight with Back Nut for able Bend Relief (Suitable for all following receptacles and in-line receptacles) ontact configuration from page IP IP 68 L L S S L L L L S S L L imensions in mm Size L L ~ 7 ~ 8 9, 8 7 ~ 7 ~, ~ 8 ~ 8 ~ ~ 8 ~ 6 ~ imensions in mm Size L L ~ ~ 9, 8 7 ~ 9 ~ 8, ~ ~ ~ ~ ~ 6 ~ W W Right-Angle Plug - IP with Standard Back Nut - IP with Back Nut for able Bend Relief A ontact configuration from page (Suitable for all following receptacles and in-line receptacles) A W W B imensions in mm Size A B ~ ~ 9 ~7 ~ Page OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

7 Series OU-MINI-SNAP A A 6 Break-Apart-Plug - IP 68 watertight, with Standard Back Nut - IP 68 watertight, with Back Nut for able Bend Relief* (Suitable for all following receptacles and in-line receptacles) IP L A L ontact configuration from page L A 6 L Bau- Abmessungen in mm größe L L ~ 6 ~ OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page

8 OU-MINI-SNAP Series A 7 A 8 Break-Apart-Plug - IP 68 with Standard Back Nut - IP 68 with Back Nut for able Bend Relief* (Suitable for all following receptacles and in-line receptacles) IP L A 7 L ontact configuration from page L A 8 L imensions in mm Size L L ~ 7 ~ ~ ~ 8 Page OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

9 Series OU-MINI-SNAP A A Panel-Mounted Plug - IP with hex nut, non-latching (Suitable for all following receptacles and in-line receptacles) L L A A L ontact configuration from page imensions in mm Panel Size L L L ut-out 7,8, 8, SW 8, / 9,, 9,, SW,6 /,, 9,7, 8, 7 SW,6 /, 9 6, SW 6,6 / 8, SW OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page

10 OU-MINI-SNAP Series K K K K In-Line Receptacle - IP with Standard Back Nut - IP with Back Nut for able Bend Relief - IP 68 watertight with Standard Back Nut - IP 68 watertight with Back Nut for able Bend Relief ontact configuration from page IP IP 68 L L K K L L K K imensions in mm Size L ~ 9, 8 7 ~ ~ ~ imensions in mm Size L ~ Page 6 OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

11 Series OU-MINI-SNAP ) L = Maximum Length incl. ontact Insert ) L = Length of Housing Receptacle Style OU-MINI-SNAP REEPTALE IP, installation from front of panel L L L Technical ata IP anti-rotation feature contact configuration from page M imensions in mm Panel Size ) ) SW L L L M ut-out ~9, ~ 9,, 9x,,, 8,, SW 8, / 9, ~, ~ 8, 6, x,,,, SW, /, ~7, ~, 8, x 8, 7,,, SW,6 /, ~, ~,, 8x,, 6,, SW 6,6 / 8, Style OU-MINI-SNAP WATERTIHT REEPTALE IP 68*, installation from front of panel L L L Technical ata IP 68 contact configuration from page distance ring for wall-thickness adjustment, see page 6 d imensions in mm Panel Size ) ) ) L L L M d ut-out ~, ~8, 8, 9x,,,,,,, ~6, ~9,, x 8, 7,,,,, ~9, ~8,, 6x, 9, 7,, 6, 6, ~, ~, 6, x 6,,,,,, ) Min. wallthickness without using distance ring Style OU-MINI-SNAP WATERTIHT REEPTALE IP 68*, installation from front of panel with low rear profile L L L Technical ata M IP 68 anti-rotation feature contact configuration from page imensions in mm Size ) ) SW L L L M ut-out ~, ~, 8, 9x,,,,, SW 8, / 9, ~6, ~,, x 8, 7,,, SW, /,, ~8, ~,,6 x 9, 7,,,6 SW, /, ~8, ~,, 6x, 9, 7,, SW, / 6, *Reference: Potted Receptacle please see page 8 III. OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page 7 Panel

12 OU-MINI-SNAP Series ) L = Maximum Length incl. ontact Insert ) L = Length of Housing Receptacle Style OU-MINI-SNAP REEPTALE IP, ONTINUOUS THREA, installation from rear or front of panel. ront extension adjustable L L L Technical ata M IP anti-rotation feature contact configuration from page SW- imensions in mm Panel Size ) ) SW L L L M SW- ut-out ~9, ~ 8,, 9x,,, 8,,, SW 8, / 9, ~, ~ 8, 6, x,,,,, SW, /,, ~, ~ 8,, x 9, 7,, 7,, SW, /, ~7, ~, 8, x, 7,, 7,, SW,6 /, ~, ~,, 8x,, 6,,, SW 6,6 / 8, 8 Style 8 OU-MINI-SNAP WATERTIHT REEPTALE IP 68*, with slotted nut, installation from rear of panel L L Technical ata M L IP 68 anti-rotation feature contact configuration from page nutdriver for slotted mounting nut see page 68 imensions in mm *) **) Panel Size ) ) SW L L L M ut-out ~, ~, 7, 9x,, 6, SW 8, / 9,**) ~6, ~,, x 8, 8, SW, /,*), ~, ~, 9, x 9, 7, SW, /,*) ~8, ~,, 6x, 8, SW, / 6,**) ~, ~ 6, 6, x 6,, SW 8, /,*) SW *Reference: Potted Receptacle please see page 8 III. Page 8 OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

13 Series OU-MINI-SNAP ) L = Maximum Length incl. ontact Insert ) L = Length of Housing B Receptacle Style B OU-MINI-SNAP REEPTALE IP (similar style ), with grounding tab, installation from front of panel L L L Technical ata Massefahne M IP anti-rotation feature contact configuration from page imensions in mm Size ) ) SW L L L M ut-out ~,7 ~ 9,, 9x,,, 8,, SW 8, / 9, ~, ~, 6, x,9,,, SW, /, ~, ~,, 8x,8, 6,, SW,6 /, Style OU-MINI-SNAP REEPTALE IP, installation from rear of panel L L M Technical ata Panel IP anti-rotation feature contact configuration from page nutdriver for slotted mounting nut see page 68 L imensions in mm Size ) ) SW L L L M ut-out, ~, ~, 7, x 6,, 7, SW, /,* ) ~, ~, 8, x 8,8, 9, SW, /,** ) ~, ~,, 8x,8 7, 7, SW 7, / 8,** ) Style OU-MINI-SNAP REEPTALE IP 68*, with round nut, installation from rear of panel * ) ** ) Panel SW L L L Technical ata IP anti-rotation feature contact configuration from page M imensions in mm Size ) ) SW L L L M ut-out ~6, ~,, x 7,9 7,, 8, SW, /, *Reference: Potted Receptacle please see page 8 III. OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page 9 Panel

14 OU-MINI-SNAP Series ) L = Maximum Length incl. ontact Insert ) L = Length of Housing H Receptacle Style H OU-MINI-SNAP REEPTALE IP, installation from front of panel L L L Technical ata IP anti-rotation feature contact configuration from page M imensions in mm Size ) ) SW L L L M ut-out ~9, ~, 6, 9x,,9,, SW 8, / 9, ~, ~, 7, x,,, 7, SW, /,, ~6, ~, 7, x 8, 7,, 9, SW, /, ~6, ~ 6, 9, 6x 9, 9, 7,, SW,6 / 6, Panel Q Style Q OU-MINI-SNAP REEPTALE IP, ONTINUOUS THREA, (see Style, but special nuts) installation from rear or front of panel. Extension in front of panel is adjustable L M L L Technical ata IP anti-rotation feature contact configuration from page nutdriver for slotted mounting nut, see page 68 imensions in mm Panel Size ) ) SW L L L M ut-out ~9, ~ 8,, 9x,, 8,, SW 8, / 9, ~, ~ 7, 6, x,,, SW, /,, ~, ~ 6,, x 8,,, SW, /, ~7, ~ 9, 8, x 9,,, SW,6 /, ~, ~,, 8x, 6,, SW 6,6 / 8, Page OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

15 ontact onfiguration Series PB and solder contacts are factory-installed in the insulation body. rimp contacts are shipped separately.

16 OU-MINI-SNAP Series Size Terminations ) Size Series Positions Positions ontact ) mm Nominal Signal ontact urrent Load in A* Test Voltage acc. VE 67 ) Sloder rimp 7) PB ) View on termination side Pin Part Socket 87,9 Standard ontact onfiguration A) 87,9 7,7 7 7,7 7 7, ) In most cases the operating voltage according to MIL-ST-, Method is twice as high as according to VE. ) Termination cross section see page ) Termination and surface see page 9 ) PB-Layout und Printlängen auf separatem ) PB Layout and pin length on request 7) Tools for assembly see page 6 to 68 * erating actor see page 86 A) Standard ontact onfiguration (compatible with other manufacturers) Page OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

17 Series OU-MINI-SNAP Size Terminations ) Size Series Positions Positions ontact ) mm Nominal Signal ontact urrent Load in A* Test Voltage acc. VE 67 ) Solder rimp 7) PB ) View on termination side Pin Part Socket,, Standard ontact onfiguration A) 87,9,9 6, , , 7 6) ) In most cases the operating voltage according to MIL-ST-, Method is twice as high as according to VE. ) Termination cross section see page ) Termination and surface see page 9 ) PB Layout and pin length on request 6) Only Socket insert available 7) Tools for assembly see page 6 to 68 * erating actor see page 86 A) Standard ontact onfiguration (compatible with other manufacturers) OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page

18 OU-MINI-SNAP Series Size, Terminations ) Size Series Positions Positions ontact ) mm Nominal Signal ontact urrent Load in A* Test Voltage acc. VE 67 ) Solder rimp 7) PB ) View on termination side Pin Part Socket Standard ontact onfiguration A 87 A,7 7 A A 9 87,7 7 7, ) In most cases the operating voltage according to MIL-ST-, Method is twice as high as according to VE. ) Termination cross section see page ) Termination and surface see page 9 ) PB Layout and pin length on request 7) Tools for assembly see page 6 to 68 * erating actor see page 86 A) Standard ontact onfiguration (compatible with other manufacturers) Page OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

19 Series OU-MINI-SNAP Size ) In most cases the operating voltage according to MIL-ST-, Method is twice as high as according to VE. ) Termination cross section see page ) Termination and surface see page 9 ) PB Layout and pin length on request 7) Tools for assembly see page 6 to 68 * erating actor see page 86 Terminations ) Size Series Positions Positions ontact ) mm Nominal Signal ontact urrent Load in A* Test Voltage acc. VE 67 ) Solder rimp 7) PB ) View on termination side Pin Part Socket Standard ontact onfiguration A) 6 6,9 87,9 87, , A) Standard ontact onfiguration (compatible with other manufacturers) OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page

20 OU-MINI-SNAP Series Size ) In most cases the operating voltage according to MIL-ST-, Method is twice as high as according to VE. ) Termination cross section see page ) Termination and surface see page 9 ) PB Layout and pin length on request 7) Tools for assembly see page 6 to 68 * erating actor see page 86 Terminations ) Size Series Positions Positions ontact ) mm Nominal Signal ontact urrent Load in A* Test Voltage acc. VE 67 ) Solder rimp 7) PB ) View on termination side Pin Part Socket Standard ontact onfiguration A) 7 87,9 7,7 7 7, Page 6 OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

21 etails for the : Keying Housing Materials / Surfaces Insulation Body Material ontacts ontact Termination ross Section (AW) ollet System Bend Protection Sleeves OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page 7

22 OU-MINI-SNAP etails for the oding Series Angle Receptacle ront View Baugröße, standard types on request olor coding on request. Housing Materials / Surfaces Standard u-alloy / matt chromate Special materials and surfaces on request. N u-alloy / nickel S u-alloy / black chromate Page 8 OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

23 etails for the OU-MINI-SNAP Insulation Body Material T PBT P PEEK Additional materials on request. Turned ontact Article Number PBT PEEK Solder Termination rimp Termination PB Termination - = available ontact Type / ontact Surface - ontact iameter Type Surface ontact in mm Socket L -,7 µm Au (min.) L, Pin L -,7 µm Au (min.) Socket -,7 µm Au (min.) Pin -,7 µm Au (min.) Socket P -,7 µm Au (min.) Pin P -,7 µm Au (min.) L = Solder termination = rimp termination P = PB termination M N P Q R,7,9 mixed,,,6,,, Has to match with selected contact inserts J M P Q S T V W OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page 9

24 OU-MINI-SNAP etails for the ontact Termination ross Sections rimp ontact ontact Size AW mm,7 /6,/,,7,8,9 /6,/,,9,8,7 /6,/,,7,8,9 /6,/, Tools for crimping and their adjustments see Page 66.,9 /,/,8 H, 8, L,7 /6,/,,7,8,9 /6,/,,9,8,9 /,/,8 H, 8, L,7 /6,/,,7,8,7 8/,8/,,9 /6,/,,9 /,/,8 H, 8, L,6 6 - N Page OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

25 etails for the OU-MINI-SNAP ontact Termination ross Sections Solder ontact ontact Term. Term. ross AW mm,, 8,8,7,6 6,,7,8,8,9,8,8,,,,6, 8,,,8,,, -, H N Q S PB ontact ontact Term.,,,7,,9,7,,7,6,7,,7 or mixed inserts (Please provide details of termination cross section!) OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page

26 OU-MINI-SNAP etails for the ollet System EMI Ring Anti Rotation Pin able able diameter in mm Size, ollet Nut >, -, >, -, Insert: for all Plugs and In-Line Receptacles. >, -, Application: ollet nut for strain relief, EMI ring for conductive path between shield and housing. >, -, >, -, >, -, >, -, >, - 6, 6 > 6, - 6, > 6, - 7, > 7, - 7, > 7, - 8, > 8, - 8, > 8, - 9, > 9, - 9, > 9, -, 9 >, -, >, -, without collet system Page OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

27 etails for the OU-MINI-SNAP able Bend Relief olor of the able Bend Relief olor / RAL-Number (similar) red RAL A white RAL 9 B yellow RAL 6 green RAL 69 blue RAL E grey RAL 7 black RAL 9 orange RAL H purple RAL J brown RAL 86 K light green RAL 68 L light blue RAL M Temperature range PUR - º up to +8 º Short-term up to + º Material PUR without cable bend relief P OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9, Page

OU-MINI-SNAP etails for the Right-Angled Print ontacts in the Receptacle 6 7 8 9 6 7 8 9 Right-Angled Print ontact A PB-Layout

28 OU-MINI-SNAP etails for the Right-Angled Print ontacts in the Receptacle Right-Angled Print ontact A PB-Layout on request Page OU-Steckverbindungssysteme mbh & o. K, Pregelstr., -8 Mühldorf/Inn, Tel. +9/86 /6 6-, ax +9/86 /6 6 9,

ODU SPC Single POWER Connector

Catalog ODU SPC Single POWER Connector ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstraße 11, D 84453 Mühldorf / Inn Tel.: +49/8631/6156-0, Fax: +49/8631/6156-49, E-Mail: zentral@odu.de, www.odu.de