PVL Series Solenoid & Remote Pilot Operated 1/8" & 1/4" Valves zpv06

Transcription

1 PVL Series Solenoid & Remote Pilot Operated /8" & /4" Valves zpv06 Section asic Valve unctions... 3 Stacking System Overview... 4 eatures (PVL & PVL)... 5 Part Numbers Stacking (PVL & PVL)... 6 Mounting Options... 7 ccessories (PVL & PVL)... 8 Part Numbers Inline (PVL & PVL)... 9 Solenoids & Electrical onnectors...0- Stacking System Overview (PVL0 & PVL0)... 2 Electrical onnection (PVL0 & PVL0)... 3 eatures (PVL0 & PVL0)... 4 ommon Part Numbers (PVL0 & PVL0) PVL PVL Pin ssignments (PVL0 & PVL0) Solenoids & ables Technical ata imensions ccessories / Spare Parts old text part numbers are standard. Standard text part numbers may have longer lead times. Parker Hannifin orporation ivision

2 atalog 0600P-9/US Notes ir ontrol Valves 2 Parker Hannifin orporation ivision

3 atalog 0600P-9/US asic Valve unctions Single Solenoid 4-Way, 2-Position 4-Way Valve unctions Single Remote Pilot 4-Way, 2-Position #4 #2 #4 #2 e-energized position Solenoid operator #4 de-energized. Pressure at inlet port connected to outlet port 2. Outlet port 4 connected to exhaust port 5. Energized position Solenoid operator #4 energized. Pressure at inlet port connected to outlet port 4. Outlet port 2 connected to exhaust port 3. Normal position Pressure at inlet port connected to outlet port 2. Outlet port 4 connected to exhaust port 5. Operated position Maintained air signal at port 4. Pressure at inlet port connected to outlet port 4. Outlet port 2 connected to exhaust port 3. ouble Solenoid 4-Way, 2-Position ouble Remote Pilot 4-Way, 2-Position #4 #2 #4 #2 Solenoid operator #4 energized last. Pressure at inlet port connected to outlet port 4. Outlet port 2 connected to exhaust port 3. Solenoid operator #2 energized last. Pressure at inlet port connected to outlet port 2. Outlet port 4 connected to exhaust port 5. Momentary air signal at port 4 last. Pressure at inlet port connected to outlet port 4. Outlet port 2 connected to exhaust port 3. Momentary air signal at port 2 last. Pressure at inlet port connected to outlet port 2. Outlet port 4 connected to exhaust port 5. ouble Solenoid 3-Position ouble Solenoid / Remote Pilot ual 3-Way, 2-Position N P E #4 #2 #4 #2 #4 #4 With #2 operator energized inlet port connected to cylinder port 2, cylinder port 4 connected to exhaust port 5. With #4 operator energized inlet port connected to cylinder port 4, cylinder port 2 connected to exhaust port 3. ll Ports locked ll ports blocked in the center position. enter Exhaust ylinder ports 2 and 4 connected to exhaust ports 3 and 5 in center position. Port is blocked. With #4 & #2 operators both de-energized pressure at inlet port blocked, outlet port 4 connected to exhaust port 5, outlet port 2 connected to exhaust port 3. With #4 operator energized pressure at inlet port connected to outlet port 4, exhaust port 5 blocked, outlet port 2 connected to exhaust port 3. With #2 operator energized pressure at inlet port connected to outlet port 2, exhaust port 3 blocked, outlet port 4 connected to exhaust port 5. With #4 & #2 operators both energized pressure at inlet port connected to outlet ports 4 & 2, exhaust ports 3 & 5 blocked. 3 Parker Hannifin orporation ivision

4 atalog 0600P-9/US Stacking System Overview Stacking pplication pplication The PVL Series stacking system permits assembly of several valves into one stack. Supply is connected at either a single or dual head / tail set.* Two common exhaust galleries are provided. onnections to outlet ports #2 and #4 on each valve can be accomplished by threaded pipe or instant tube fittings. Electrical connection is made to each solenoid utilizing a 5mm, 3-Pin connector plug (PVL & PVL). Each stack assembly can handle any combination of the following valve types: Single Solenoid Single Remote Pilot ouble Solenoid ouble Remote Pilot Two valve sizes can be combined in one stack using a transition kit. PVL Stack shows solenoid and remote pilot valves, threaded pipe ports, instant tube fittings, and a single supply head / tail set. * or simultaneous operation of more than 5 valves, a dual head / tail set is recommended. eatures reatly reduces installation costs. Reduces piping and the risk of leaks. onsolidates controls, saves space. Provides custom valving arrangements with standard components. Improves appearance of pneumatic equipment. ommon main supply port. llows for two common exhausts which can easily be plumbed away for cleanliness. Indicator lights and surge suppression available. esigned for 35mm IN rail mounting. May be surface mounted by removing IN rail clips. Servicing valves can be accomplished quickly without disassembling the entire stack or removing plumbing. 4 Parker Hannifin orporation ivision

5 atalog 0600P-9/US eatures PVL & PVL PVL Series PVL Series Specifications 4-Way, 5-Port, 2 or 3-Position Valves Single & ouble Solenoid Single & ouble Remote Pilot ual 3/2 PVL -.6 v /8" NPT & SP /4" & 6mm Tube Porting PVL -.2 v /4" NPT & SP 3/8" & 6mm Tube Porting Mounting Style Stacking Manifold Valve IN Rail Mounting (35mm) Solenoid Pilot ctuation ontinuous uty Rated PVL, PVL.2W - 2V & 24V.6V - 24V, 20V, 240V 3-Pin, 5mm (9.4mm Pin Spacing) PVL (/8"), PVL (/4") Shown e-energized Manual Overrides rass Locking & Non-Locking Operating Pressure 30 to 50 PSI (30 to 035 kpa) Operating Temperature 5 to 40 (-5 to 60 ) ertification / pproval pproved to be E Marked UL (PVL0 only) N Note: units are polarity sensitive. Pressure Exhaust 5 Parker Hannifin orporation ivision

6 atalog 0600P-9/US ommon Part Numbers (Revised 03/5/06) Single Solenoid / Remote Pilot 4-Way, 2-Position PVL (/8") & PVL (/4") Stacking Valves ouble Solenoid / Remote Pilot 4-Way, 2-Position #4 PVL PVL #2 PVL268 PVL2687 PVL2606 PVL26067 PVL2697 PVL26097 #4 /8" SP /8" NPT 6mm Tube /4" Tube /4" NPT 3/8" Tube #2 0.6 v.2 v #4 PVL PVL PVL2268 #2 #4 PVL22687 PVL22606 PVL PVL22697 PVL /8" SP /8" NPT 6mm Tube /4" Tube /4" NPT 3/8" Tube #2 0.6 v.2 v Locking Manual Override, Valve Less Solenoid. Non-Locking Manual Override, Valve Less Solenoid. ouble Solenoid / Remote Pilot 4-Way, 3-Position ouble Solenoid / Remote Pilot ual 3/2 Normally losed #4 PVL PVL P P #2 #4 #2 PVL27687 /8" NPT 0.6 v PVL /4" Tube PVL27697 /4" NPT.2 v #4 #4 PVL PVL25687 /8" NPT 0.6 v PVL /4" Tube PVL PVL25697 /4" NPT.2 v PVL /8" Tube Non-Locking Manual Override, Valve Less Solenoid. e e #4 #2 #4 #2 PVL PVL28687 /8" NPT 0.6 v PVL /4" Tube PVL PVL28697 /4" NPT.2 v Non-Locking Manual Override, Valve Less Solenoid. Notes: Solenoids or Remote Pilot dapter must be ordered separately from page. Each valve is shipped with 2 tie rods for stacking assembly. Standard Part Numbers in old. Parker Hannifin orporation ivision

7 atalog 0600P-9/US Mounting Options Stacking pplications Mounting on 35mm IN Rail Valve stacks mount quickly and easily to 35mm IN rail with the use of a pneumatic head / tail set. The dual head / tail set provides input and exhaust ports at both ends and is recommended if more than 5 valves are to be operated simultaneously. Surface Mounting Stacks may be surface mounted by removing the 35mm IN mounting hardware on the pneumatic head / tail set. Removal or Replacement Modules are removed in reverse of the order shown at right. efore removing a module for service or replacement, loosen the pneumatic tail piece. PVL Mounting Procedure. lip on and tighten the pneumatic head piece. 2. ssemble the two parallel mounting rods using cross rods provided with modules. module 3. lip on the pneumatic tail piece. Start screws into mounting rod but leave loose for module insertion. 4. To mount valves, position upper slot then pushlock lower slot. Mount modules (valves, modules, transition pieces, etc.) and press together. O-rings Stack shows solenoid and remote pilot valves, threaded pipe ports, instant tube fittings, and a single supply head / tail set. 5. Tighten the assembly. 7 Parker Hannifin orporation ivision

8 atalog 0600P-9/US Stack omponents & ccessories Single Supply Head / Tail Sets PVL & PVL Stacking System Transition its Series Model Number Port Size PVL PVL** PVL797 PVL79 PVL737 PVL73 /4" NPT /4" SP 3/8" NPT 3/8" SP it includes: Ported (head) and lank (tail) plus all necessary hardware. * IN rail mounting clips on both head and tail. Maximum stack length of 6 valves. **! aution: IN rail mounting clips on head piece only. Maximum stack length of 8 valves. Note: IN rail mounting clips may be removed for surface mounting. ombination Model Number Port Size PVL & PVL PVUL97 PVUL9 NPT SP it enables valves of two different sizes to be combined in the same stack. it includes: 2 Ported Heads (one for each valve size) and a Transition Module with an uxiliary Supply Port. Maximum number of valves for each size is 6. Larger Size Head Transition Module Smaller Size Head ual Supply Head / Tail Sets Pressure Isolation it ssembly Instructions Valves Extended ross Rods Series Model Number Port Size PVL PVL PVL7297 PVL729 PVL7237 PVL723 /4" NPT /4" SP 3/8" NPT 3/8" SP it includes: 2 Ported s (head and tail) plus all hardware. Mounts to 35mm IN rail at both ends. Maximum stack length of 6 valves. Note: IN rail mounting clips may be removed for surface mounting. Example : Two different pressures P and P2 can supply the same bank of power valves, the exhausts remaining common. Example 2: omplete isolation of the commons in the same bank of power valves: main pressure and exhaust commons. Series Model Number it includes: PVL PVL90 3 isolation plugs, PVL PVL90 2 open port plugs and 2 extended cross rods. PVL PVL902 0 isolation discs PVL PVL902 and 0 O-rings. Example 3: The exhaust commons can be isolated within the same bank of power valves, while the main pressure supply remains common. 8 Parker Hannifin orporation ivision

9 atalog 0600P-9/US ommon Part Numbers Single Solenoid / Remote Pilot 4-Way, 2-Position PVL (/8") & PVL (/4") Inline Valves ouble Solenoid / Remote Pilot 4-Way, 2-Position #4 #2 #4 #2 #4 #2 #4 #2 PVL PVL68 /8" SP PVL PVL268 /8" SP PVL687 /8" Pipe 0.6 v PVL2687 /8" Pipe 0.6 v PVL6067 /4" Tube PVL PVL697 /4" Pipe PVL6097 3/8" Tube Solenoid or Remote Pilot dapter sold separately..2 v PVL26067 /4" Tube PVL PVL2697 /4" Pipe PVL /8" Tube Solenoid or Remote Pilot dapter sold separately..2 v Note: Standard Part Numbers in old. 9 Parker Hannifin orporation ivision

10 0 atalog 0600P-9/US Electrical onnectors Plug-In & emale Electrical onnectors Replacement Plug-in Electrical onnectors - 9.4mm Indication Voltage Unwired Plug Plug with 6' Lead None N/ PES0 PES2 LE & Suppression 2/24V PES2020 PES V PES200 PES220 or use with.2w/.6v solenoids on PVL (/8") and PVL (/4") valves. These IP65 connectors use a maximum 20 W wire size or come pre-wired. emale Electrical onnectors 5mm 3-Pin IN Quick onnect (Use with Enclosure 5 ) onnector escription PS298305P 8 Inch ord (/2 Meter) 5mm onnector Squeeze Here To Engage or isengage Latch Tang PS298320P 72 Inch ord (2 Meter) Note: Rated up to 35V, 55V;.75 amp max. Engineering ata: onductors: 2 Poles Plus round ontact Spacing: 8mm Solenoid roove In Solenoid round Terminal 5mm 3-Pin IN (Use with Enclosure 5 ) onnector onnector with 6' (2m) ord PS2932P PS2932P Unlighted escription PS294675P PS294675P* Light 2V or PS294679P PS294679P* Light 24V or PS294683P PS294683P* Light 0/20V PS294687P N/ Light 240/230V 22 W Wire 5mm 2.3mm Top of light 7.4mm * LE with surge suppression. Note: Max ø6.5mm (22 gage wire) cable size required for connector w/o 6' (2m) cord. IP65 rated when properly installed. Engineering ata: onductors: 2 Poles Plus round able Range (onnector Only): 4 to 6mm (0.6 to 0.24 Inch) ontact Spacing: 8mm Molded 6' ord Shown 0 Parker Hannifin orporation ivision

11 atalog 0600P-9/US Electrical onnectors Solenoids & Remote Pilot PVL & PVL 3-Pin, 5mm Solenoids (w/o electrical connectors) Voltage 8mm Pin Spacing it Number 8mm Pin Spacing Solenoid 9.4mm Pin Spacing Solenoid Replacement Power onsumption 2V PS298245P P2E-V32 PSE2492.2W 24V PS298249P P2E-V32 PSE2492.2W 24V-50/60Hz PS298242P P2E-V3 PSE249.6V 20V/60Hz PS298253P P2E-V3 PSE249.6V 240V/60Hz PS298257P P2E-V3 PSE249M.6V Notes: it includes: solenoid, (2) machine screws, (2) self threading screws, () gasket, () 3-cell gasket. Electrical connectors must be ordered separately from the chart shown below. Remote Pilot onnectors PVL (/8") & PVL (/4") Valves Model Number PVP PVP5 Port itting 5/32" Tube 0-32 UN (M5) Supplied with two screws to quickly mate with the valve body. Parker Hannifin orporation ivision

12 atalog 0600P-9/US Stacking System Overview Simplified Electrical Wiring Eliminate costly wiring of individual solenoids with compact PVL0 or PVL0 stacks of up to 6 modules with built-in electrical connectors. Simplified Setup single cable provides electrical connection to PL or special terminal block. PVL0 PVL0 & PVL0 Stacking System Modular Stacking The modular stacking system permits easy assembly of valves and external connection modules into a single stack. Integral supply and exhaust ports are manifolded as the stack is assembled. Intermodular electrical connection is accomplished through integral 20-Pin electrical connectors, eliminating the need for harnessing or wiring within the stack. PVL0 single and double solenoid valves can be combined into one stack with the use of transition modules. PVL0 single and double solenoid valves can be combined into one stack without any transition modules. The electrical head / tail set provides a single electrical connection from the stack to a PL or terminal block. Each stack mounts easily to 35mm IN rail by means of a pneumatic head / tail set, which also provides common air supply and exhaust. PVL0 PVL0 External onnections External connection modules with PVL0 valves allow sensor feedback or output connections to be integrated into the valve stack. PVL0 Stacking System enefits Reduces wiring, saves space. llows custom arrangements with standard components. urther reduces wiring by integrating feedback and output connections into the PVL0 valve stack. reatly reduces installation time and costs. Servicing valves can be accomplished quickly without disassembling the entire stack. 2 Parker Hannifin orporation ivision

13 atalog 0600P-9/US Electrical onnection utoconfiguration The construction of the stack determines the relationship of each connector pin and the device it is to control. The address of each solenoid valve and each feedback or output connection is based on its physical position in the stack. or PVL0, addresses are assigned consecutively from top to bottom and left to right beginning at top left with 0. or PVL0, addresses are assigned consecutively from left to right and beginning at top left with 0. PVL0 & PVL0 Stacking System PVL0 PVL0 25-Pin onnector, ual Size Stack Maximum 2 ddresses PVL0 It is easy to add or remove one or more modules to adapt to machine modifications. Once the controller is programmed, however, it is recommended that, where possible, the addition or permanent removal of any module be done at the tail (right-hand) end of the stack to prevent affecting the addresses of other modules in the stack. change in address requires reprogramming of the controller. 35-Pin onnector, ual Size Stack Maximum 32 ddresses onnector Options PVL0 PVL0 25-Pin onnector, Single Size Stack Maximum 6 ddresses 25-Pin onnector, Maximum 6 ddresses 3 Parker Hannifin orporation ivision

14 atalog 0600P-9/US eatures PVL0 & PVL0 PVL0 Series PVL0 Series Specifications 4-Way, 5-Port, 2 or 3-Position Valves Single & ouble Solenoid ual 3/2 Valves PVL0-0.6 v /8" NPT & SP /4" & 6mm Tube Porting PVL0 -.2 v /4" NPT & SP 3/8" & 8mm Tube Porting Mounting Style IN Rail Mounting (35mm) Stacking Manifold Valve Solenoid Pilot ctuation PVL0, PVL0 Low watt solenoid pilots:.2w/.6v Lights & Surge Suppression Standard 2V to 20V 3 5 PVL0 Single Solenoid Shown e-energized Operating Pressure 30 to 50 PSI (30 to 035 kpa) Operating Temperature 5 to 40 (-5 to 60 ) ertification / pproval pproved to be E Marked IP PVL0 3-Position P Note: units are polarity sensitive. Pressure Exhaust 4 Parker Hannifin orporation ivision

15 atalog 0600P-9/US ommon Part Numbers Single Solenoid 4-Way, 2-Position PVL0 Single & ouble Solenoid ouble Solenoid 4-Way, 2-Position #4 #2 #4 #2 PVL0 PVL0687W2 /8" NPT 2-24 V PVL0 PVL02687W2 /8" NPT 2-24 V PVL0687W V PVL06067W2 /4" Tube 2-24 V 0.6 v PVL02687W V PVL026067W2 /4" Tube 2-24 V 0.6 v PVL06067W V PVL026067W V ouble Solenoid 4-Way, 3-Position P ouble Solenoid ual 3/2 Normally losed P #4 #2 #4 PVL0 PVL07687W2 /8" NPT 2-24 V PVL07687W V PVL076067W2 /4" Tube 2-24 V 0.6 v PVL0 PVL05687W2 /8" NPT 2-24 V 0.6 v PVL05687W V PVL076067W V E #4 #2 PVL0 PVL08687W2 /8" NPT 2-24 V PVL08687W V PVL086067W2 /4" Tube 2-24 V PVL086067W V 0.6 v Notes: Solenoids sold separately on page 27. Part Numbers o Not include Solenoids. Standard Part Numbers in old. 5 Parker Hannifin orporation ivision

16 atalog 0600P-9/US ommon Part Numbers Single Solenoid 4-Way, 2-Position PVL0 Single & ouble Solenoid ouble Solenoid 4-Way, 2-Position #4 #2 #4 #2 PVL0 PVL0697W2 /4" NPT 2-24 V PVL0 PVL02697W2 /4" NPT 2-24 V PVL0697W V PVL06097W2 3/8" Tube 2-24 V.2 v PVL02697W V PVL026097W2 3/8" Tube 2-24 V.2 v PVL06097W V PVL026097W V ouble Solenoid 4-Way, 3-Position P ouble Solenoid ual 3/2 Normally losed P #4 #2 #4 PVL0 PVL0 PVL07697W2 /4" NPT 2-24 V.2 v PVL07697W V PVL05697W2 /4" NPT 2-24 V.2 v PVL05697W V E #4 #2 PVL0 PVL08697W2 /4" NPT 2-24 V.2 v PVL08697W V Notes: Solenoids sold separately on page 27. Part Numbers o Not include Solenoids. Standard Part Numbers in old. 6 Parker Hannifin orporation ivision

17 atalog 0600P-9/US Stack onstruction PVL0 Modular Valve Stacking System zpv4 onstructing a PVL0 Stack When constructing a stack, the following rules apply:. stack must have a pneumatic and an electrical head / tail set. 2. stack has a physical limit of 6 active modules (valves, feedback modules and output modules), regardless of whether they are double or single. 3. Single feedback and output modules must be stacked with single solenoid valves, and double feedback and output modules must be stacked with double solenoid valves. 4. ouble and single modules can be combined in a stack with the use of a transition module. stack order of double to single is recommended to maximize the number of possible addresses.! UTION: If the application requires simultaneous operation of valves and/or external connection modules, see Technical ata page for operating limits. ddressing ddresses are automatically assigned to each solenoid and each external connection based on its position in the stack. ddresses are numbered consecutively from top to bottom and left to right beginning at the top left of the stack with 0. To find the total number of addresses that will be required for a stack, calculate the following for each type of module based on table below and total: ddresses x Quantity of Units = ddresses Required Type of ddresses Quantity ddresses Module ssigned In stack Required ouble solenoid valve 2 x = ouble ck module 4 x = ouble output module 4 x = Single solenoid valve x = Single feedback module 2 x = Single output module 2 x = TOTL RESSES = PVL0 ouble to Single Valve Stack with 25-Pin onnector: 6 valves 9 addresses Electrical onnection When selecting the electrical head / tail set, the following must be considered:. The size (double or single) of the electrical head piece must match that of the first module to its right. 2. The electrical connector must provide sufficient addresses for the stack. The number of addresses possible with each type of head / tail set is shown in the following table. ased on the head type needed, select the connector that provides sufficient addresses for the stack. ouble to Single Mixed Stack with 25-Pin onnector: 5 active modules 0 addresses Head Type onnector Possible ddresses Single 25-Pin 6 ouble 25-Pin 2 35-Pin 32 7 Parker Hannifin orporation ivision

18 atalog 0600P-9/US Stack omponents & ccessories PVL0 Modular Valve Stacking System External onnection Modules With 20-Pin intermodular system and 2mm (mini) connectors, these modules can be combined with valves and/or other modules. eedback modules supply voltage to sensors and accept signals for communication back to the PL. eedback modules can be used for PNP or NPN sensors, indicator lights will only work on PNP sensors. Output modules allow connection and control of valves mounted externally from the stack. Type Size onnections Model Number eedback Output Single 2 Inputs PVLE302 ouble 4 Inputs PVLE2304 Single 2 Outputs PVLS302 ouble 4 Outputs PVLS2304 ouble Single Head / Tail Sets Single air supply head / tail are used for shorter manifolds and dual air supply head / tail are used for longer manifolds. ual air supply head / tail sets contains 2 ported ends plus all hardware. lamps to 35mm IN rail. Removing 35mm hardware provides mounting holes for surface mounting. Single air supply head / tail sets clamp on one side only, ual air supply head / tail sets clamp on both sides. Type Port Size Model Number Single /4" NPT PVL797 Supply /4" SP PVL79 ouble /4" NPT PVL7297 Supply /4" SP PVL729 Pressure Isolating isc Single ir Supply Head / Tail Set ual ir Supply Head / Tail Set escription Sold in lots of 0. Model Number PVL902 Electrical or use with single size stacks. Provides electrical link between all functions in the stack and the PL. Size onnector Model Number Single 25-Pin (Male),-Sub PVL925 ouble 25-Pin (Male),-Sub 35-Pin (Male) PVL9225 PVL92235 Single Size Stacks or use with dual size stacks. Provides electrical connection to PL and transition between sizes. Stack Order onnector Model Number ouble then Single 25-Pin (Male),-Sub 35-Pin (male) PVL9425 PVL94235 Single then ouble 25-Pin (Male),-Sub PVL9325 ual Size Stacks 8 Parker Hannifin orporation ivision

19 atalog 0600P-9/US Serial us ommunications PVL0 Serial us Head / Tail Sets Input & Output Version escription Head Module for Single Solenoid Valves with SI, 4-Inputs and 4-Outputs PVL344 Model Number PVL44 - with M2 (Micro) onnection PVL44V - with Vampire onnection escription Head Module for Single to ouble Solenoid Valves with SI, 4-Inputs and 4-Outputs. Use this module for ouble Solenoid Valves. (Includes Transition Module) Model Number PVL344 - with M2 (Micro) onnection PVL344V - with Vampire onnection escription uxiliary Head Module with SI, 4-Inputs and 4-Outputs Model Number PVL544 Notes: If application requires control of 6 single solenoid (24V) PVL0 valves and 6 inputs (PNP), select () PVL44, (3) PVL544 and the required air supply module. 4 SI nodes are consumed. If application requires control of 8 double solenoid (24V) PVL0 valves and 6 inputs (PNP), select () PVL344, (3) PVL544 and the required air supply module. 4 SI nodes are consumed. us and power connection is through 4-Pin Micro (M2) single key male connectors or Vampire connection. Input connection is through 4-Pin Micro (M2) single key female connectors. 9 Parker Hannifin orporation ivision

20 atalog 0600P-9/US Serial us ommunications PVL0 Serial us Head / Tail Sets Transition Plate PVL600 escription Head Module for PVL0 with: evicenet (6-Outputs) Profibus-P (6-Outputs) Interbus-S (6-Outputs) Model Number PVL600 PVLP600 PVLS600 Notes: Maximum of 6 solenoids can be controlled through these modules. These modules can be directly connected to single solenoid PVL0 valves. separate Transition Plate, PVL930, must be ordered to connect to double solenoid PVL0 valves. 20 Parker Hannifin orporation ivision

21 atalog 0600P-9/US Stack onstruction onstructing a PVL0 Stack When constructing a stack, the following rules apply:. stack must have a pneumatic and an electrical head / tail set. 2. stack has a physical limit of 6 solenoids. 3. Single and double solenoid valves can be combined into one stack without any transition module.! UTION: If the application requires simultaneous operation of valves and/or external connection modules, see Technical ata page for operating limits. PVL0 Modular Valve Stacking System PVL0 ddressing ddresses are automatically assigned to each solenoid and each external connection based on its position in the stack. ddresses are numbered consecutively from left to right beginning at the top left of the stack with 0. To find the total number of addresses that will be required for a stack, calculate the following for each type of module based on table below and total: ddresses x Quantity of units = ddresses Required Type of ddresses Quantity ddresses Module ssigned In stack Required ouble solenoid valve 2 x = Single solenoid valve x = TOTL RESSES = 25-Pin onnector with Intermediate ir Supply Module: 5 valves 7 addresses Head Type onnector Possible ddresses 25-Pin 6 9-Pin Pin onnector: 0 valves 6 addresses 2 Parker Hannifin orporation ivision

22 atalog 0600P-9/US Stack omponents & ccessories PVL0 Modular Valve Stacking System Head / Tail Sets Electrical / Port Size / Type onnector Model Number 3/8" NPT, Single 3/8" NPT, Single 3/8" NPT, Single -Sub, 25-Pin w/external Pilot (Px) -Sub, 25-Pin w/o External Pilot (Px) ircular, 9-Pin w/o External Pilot (Px) PVL PVL73725 PVL7379 -Sub, 25-Pin ircular, 9-Pin ir Supply Modules Tail ir Supply Module to be mounted at the end of the manifold for dual air supply for longer manifolds. Intermediate ir Supply Module used when multiple pressures are required on a manifold. Port Size / Type Tail ir Supply Module Intermediate ir Supply Module 3/8" NPT PVUL237 PVUL237E 3/8" SP PVUL23 PVUL23E Tail ir Supply Module Intermediate ir Supply Module Pressure Isolating isc escription Sold in lots of 0 Model Number PVL902 Pressure Isolating isc O-ring Transition its (PVL0 to PVL0) Port Size / Type onnector Model Number /4" NPT to 3/8" NPT /4" NPT to 3/8" NPT /4" SP to 3/8" SP /4" SP to 3/8" SP Transition it with External Pilot (Px) Transition it without External Pilot (Px) Transition it with External Pilot (Px) Transition it without External Pilot (Px) PVL27379 PVL7379 PVL2739 PVL Parker Hannifin orporation ivision

23 atalog 0600P-9/US Serial us ommunications PVL0 Serial us Head / Tail Sets Input & Output Version escription Head Module with SI 4-Inputs and 4-Outputs escription uxiliary Head Module with SI, 4-Inputs and 4-Outputs Model Number PVL44 - with M2 (Micro) onnection PVL44V - with Vampire onnection Model Number PVL544 Note: If application requires control of 6 single or 8 double solenoid (24V) PVL0 valves 6 inputs (PNP), select () PVL44, (3) PVL544 and the required ir Supply Module. 4 SI nodes are consumed. us and external power connection is through 4-Pin Micro (M2) single key male connectors or Vampire connection. Input connection is through 4-Pin Micro (M2) single key female connectors. PVL44 ir Supply Module for Serial us ommunication This module is required when using a us ommunication Head Module. Port Size / Type onnector Model Number 3/8" NPT 3/8" NPT ir Supply Module with External Pilot (Px) ir Supply Module without External Pilot (Px) PVL2737 PVL Parker Hannifin orporation ivision

24 atalog 0600P-9/US Serial us ommunications PVL0 Serial us Head / Tail Sets PVL600 escription Head Module for PVL0 with: evicenet (6-Outputs) Profibus-P (6-Outputs) Interbus-S (6-Outputs) Model Number PVL600 PVLP600 PVLS600 Notes: Maximum of 6 solenoids can be controlled through these modules. These modules can be directly connected to the ir Supply Modules PVL2737, PVL737, PV- L273 or PVL73 which has to be ordered separately. 24 Parker Hannifin orporation ivision

25 atalog 0600P-9/US Pin ssignments -Sub, 25-Pin Single Size Head / Tail Set Pin No. Stack ddress Pin No. Stack ddress Not Used V (feedback) (PVL0) V (feedback) (PVL0) ommon 0v -Sub, 25-Pin ouble Size Head / Tail Set* eedback onnector* 4 2 Pin No. Stack ddress Pin No. Stack ddress Not Used V (feedback) V (feedback) ommon 0v Output onnector* Pin No. I/O Pin No. I/O 24V (feedback) V (feedback) 3 ommon 0v 4 Input 4 Output Notes: Solenoids are polarity sensitive. The common must be at 0V. Switching must be at the high potential. * vailable with PVL0 Only PVL0, PVL0 Modular Valve Stacking System 9-Pin ircular onnector L M vailable with PVL0 Only ylindrical, 35-Pin type Trident Ringlock ouble Size Head / Tail Set* * vailable with PVL0 only. T H U S V N P R E Pin No. Stack ddress 0 H 2 3 E 4 Z 5 6 H L 0 M N 2 P 3 R 4 S 5 T U V Y L M N a b c d X j i W h E k m V g e f U T R ommon 0V S P Not Used Not Used Pin No. Stack ddress Pin No. Stack ddress 0 V 8 W 9 2 X 20 3 Y 2 E 4 Z 22 5 a 23 6 b 24 H 7 c 25 8 d 26 9 e 27 L 0 f 28 M g 29 N 2 h 30 P 3 i 3 R 4 j ommon 0V S 5 k 0V (feedback) T 6 m 24V (feedback) U 7 25 Parker Hannifin orporation ivision

26 atalog 0600P-9/US Pin ssignments Pin Out etail -Sub, 25-Pin onnector PIN NO PIN NO PVL0, PVL0 Modular Valve Stacking System Output -Sub IP65 able Output -Sub IP65 able Solenoid No. 25-Pin No. olors Solenoid No. 25-Pin No. olors 3 reen 8 lue / lack 2 25 Transparent 2 20 White / lack 3 2 ark lue 3 7 haki 4 Light lue 4 9 Orange 5 Pink 5 6 White 6 23 Purple 6 8 ray 7 0 ark reen / lack Not Used 5 Red / lack 8 22 Yellow Not Used 7 Red 9 9 Light reen / lack Not Used 4 rown 0 2 Yellow / lack Valve ommon 6 lack Notes: Solenoids are polarity sensitive. The common must be at OV. Switching must be at the high potential. Maximum 6 solenoid outputs with one valve (negative) common line on Pin 6. 9-Pin ircular onnector* L M T H U S V N * vailable with PVL0 Only. 35-Pin ircular onnector* H Z Y E P R L M N a b c d X j i W h * vailable with PVL0 Only. k m V g e f U T R S E P Output 9-Pin IP65 able Output 9-Pin IP65 able Solenoid No. onnector olors Solenoid No. onnector olors Pink / rown L lue 2 White / reen 2 M Pink 3 White / Yellow 3 N rey 4 White / rey 4 P Yellow 5 E White / Pink 5 R White 6 rown / reen 6 S reen 7 Red / lue Valve ommon T lack 8 H rey / Pink Not Used U rown 9 rown / Yellow Not Used V Red 0 Violet Notes: Solenoids are polarity sensitive. The common must be at OV. Switching must be at the high potential. Maximum 6 solenoid outputs with one valve (negative) common line on Pin T. Output 35-Pin IP65 able Output 35-Pin IP65 able Solenoid No. onnector olors Solenoid No. onnector olors 0 White / rown 8 V rown / Pink White / reen 9 W rown / lue 2 White / Yellow 20 X rown / Red 3 White / rey 2 Y rown / lack 4 E White / Pink 22 Z reen / rey 5 White / lue 23 a reen / Pink 6 White / Red 24 b reen / lue 7 H White / lack 25 c reen / Red 8 rown / Yellow 26 d reen / lack 9 Violet 27 e Yellow / rey 0 L lue 28 f Yellow / Pink M Pink 29 g Yellow / lue 2 N rey 30 h Yellow / Red 3 P Yellow 3 i Yellow / lack 4 R White 0 V valves j lack 5 S reen 0 V inputs k rown 6 T rown / reen 24 V inputs m Red 7 U rown / rey 26 Parker Hannifin orporation ivision

27 atalog 0600P-9/US Solenoids & ables PVL0, PVL0 Modular Valve Stacking System PVL0 & PVL0 3-Pin, 5mm Solenoids / its (8mm Pin Spacing).2W/.6V. Voltage Override Non-Locking it Solenoid Locking it Solenoid 2V PS34445P P2E-S32 PS34445P P2E-S322 24V PS34449P P2E-S32 PS34449P P2E-S322 24V 50/60Hz PS34442P P2E-S3 PS34442P P2E-S32 20V 60Hz PS34453P P2E-S3 PS34453P P2E-S32 it includes: solenoid, (2) machine screws, (2) self threading screws, () gasket, () 3-cell gasket, () L-shaped 3-cell gasket. able with emale -Sub, IP 65 Rated, 25-Pin onnector P8L-M255 5 Meters / 6.40 t onnection to the control system is through 20 colored wires W 24, rated at 2.5 amp. able with emale IP65 Rated, 9-Pin onnector P8L-M95 5 Meters / 6.40 t onnection to the control system is through 9 colored wires W 20, rated at 5 amp. able with emale IP65 Rated, 35-Pin onnector P8L-M355 5 Meters / 6.40 t onnection to the control system is through 35 colored wires W 20, rated at 5 amp. SI Module ddressing ables P8-2 Meters / 6.56 t Used to connect SI Head Module for PVL0 and PVL0 to an SI Programming Unit. P8L-MH02 Meter / 3.28 t Used to program SI Output Head and uxilliary head modules. P8- P8L-MH02 27 Parker Hannifin orporation ivision

28 atalog 0600P-9/US Technical ata Operating Pressure Range: Single Pilot to 50 psi (3 to 035 kpa) ouble Pilot...30 to 50 psi (207 to 035 kpa) Temperature Range (mbient) Operating... 5 to 40 (-5 to 60 ) Storage to 58 (-40 to 70 )! UTION: If it is possible that the ambient temperature may fall below freezing, the medium must be moisture free to prevent internal damage or unpredictable behavior. Medium:... ry or lubricated air or inert gas Medium Quality: PVL & PVL... ry or lubricated air at 50 micron filtration Technical Information Materials: ody...lass filled polyamide Seals...Polyurethane ittings...rass Mounting: Inline...Surface mount on flat surface Stacking...Mount on 35mm IN rail or flat surface Mounting Orientation:...ll positions Manual Overrides:... Locking or non-locking Lubrication Valves are pre-lubricated and may be operated with dry air. If lubrication is desired, use 442 oil. ycle Life: million (dry air) Specific haracteristics escription /8" Valves (PVL) (PVL0) /4" Valves (PVL) (PVL0) v low Rates Threaded connector Instant tube fitting PS (bar) PE PE PS (bar) PE PE PE = input pressure 3 2 PE 3 2 PE PS = output pressure l/mn (NR) SM l/mn (NR) SM Port Sizes Instant tube fitting /4" 3/8" Threaded /8" Pipe /4" Pipe Maximum Valve itting Torque 7.4 ft-lb (0Nm) 4.8 ft-lb (20Nm) Head / Tail Port Size / Max. Torque /4" Pipe / 4.8 ft-lb (20Nm) 3/8" Pipe / 40.6 ft-lb (55Nm) or ir Operated Valves: Single cting ouble cting Single cting ouble cting Response Time (Input to Output)* 4 ms 8 ms 25 ms ms Pilot Pressure (@ 90 PSI Inlet) 44 psi 29 psi 44 psi 29 psi epilot Pressure (@ 90 PSI Inlet) 5 psi 22 psi Maximum Operating requency 5 Hz 0 Hz 5 Hz 0 Hz or Solenoid Operated Valves: Single cting ouble cting Single cting ouble cting Response Time (Input to Output)* 22 ms 2 ms 39 ms 7 ms Maximum Operating requency 5 Hz 0 Hz 5 Hz 0 Hz Power onsumption Hold =.2 Watt, =.6V =.2 Watt, =.6V Power onsumption Inrush =.2 Watt, = 3.5V =.2 Watt, = 3.5V Voltage Tolerance Standard Voltages +0% to -5% rated 70 (20 ) 2 and 24 V 24 and 20 V Rated Insulation Voltage 500 Volts 500 Volts Protection Rating IP65 IP65 Standards (except 240 V) and N * Valves tested with test chamber at 90 PSI inlet pressure. +0% to -5% rated 70 (20 ) 2 and 24 V 24 and 20 V 28 Parker Hannifin orporation ivision

29 atalog 0600P-9/US Technical ata PVL0 & PVL0 Technical Information Electrical haracteristics Standard Voltages: Solenoid... = 2 and 24 = 24V 50/60 Hz and 20V 60 Hz eedback module...24v (designed for sourcing sensor) Output module...24v Voltage Tolerance: +0% to -5% of rated 70 (20 ) Power onsumption (Solenoid): Hold... =.2W... =.6V Inrush... =.2W... = 3.5V Rated urrents (Solenoid) Voltage Holding urrent Id (rop-out urrent)* 2V 00 m 0 m 24V 50 m 5 m 48V 25 m 2.5 m 24V 65 m 22 m 20V 3.3 m 5 m * When using a programmable controller, be sure that the leakage current of the controller outputs is lower than the drop-out current value. Maximum llowable urrents: Stack = 000 m ( mp) Output module = 000 m ( mp) eedback Module = 00 m (supply + load) Indication: y LE one for each stack address PVL0 External onnection: Round connector M2 SI us Module Specifications SI us Supply Voltage: 29.5 to 3.6V us and Power onnector on Head Module: (M2) Micro 4-Pin Single ey onnector us onnector Protection Miswiring Protection External Power Supply Voltage: 2.6 to 26.4V (or solenoids only) EM Protection: IE 80-2 level 3 IE 80-3 level 3 IE 80-4 level 3 Identification ode: 8. Input onnector on Head Module (M2) Micro 4-Pin Single ey emale onnector Input Type: PNP Number of Inputs: 4 to 6 Max. 4 SI nodes are used when controlling 6 outputs and 6 inputs. Number of Outputs: 4 to 6 Max. 4 SI nodes are used when controlling 6 outputs and 6 inputs. Protection Level: IP65 (Washdown) Shock: IE g ms Short ircuit Protection: iagnostic by LE Solenoid Supply Voltage: 2.6 to 26.4V Storage Temperature: -40 to 58 (-40 to 70 ) Working Temperature: 32 to 30 (0 to 55 ), Intermittent uty (60% Rating) 32 to 04 (0 to 40 ), ontinuous uty Protection Rating... IP65! Simultaneous Operation Some applications require simultaneous use of devices during setup or operation. Under normal single device operation, reliability can be assured by staying within the stated Maximum llowable urrents. uring simultaneous operation, however, the currents for each device must be added together with the total current not exceeding the 000 m ( mp) rating for the stack (example: only ten 2V solenoids can be operated simultaneously because their total accumulated current = 000 m). This is especially true for any connected external load when using the output module. While each output module is rated for 000 m, simultaneous operation of this load will reduce this rating. alculate maximum available current for any externally connected load during simultaneous operation according to the following formula: vailable urrent =,000 m - simultaneous current* * dd all solenoid currents based on system voltage and any other external load operating simultaneously. Type of urrent Quantity urrent evice Required (simultaneous) Used Solenoid m () x = m External Load (2) m (3) x = m Total Required urrent = m (4) () epending on system voltage (see Rated urrents ). (2) eedback modules use a separate common so are not used for this calculation, but total feedback current cannot exceed 000 m ( mp). (3) epending on device connected to the output module. Use rated current (m) for device or calculate: m = Watts/Volts x 000. (4) Must not exceed 000 m ( mp). evicenet, Interbus-S and Profibus-P us Module Specifications us onnection on Head Module: Interbus-S: onnector M23 male 5-Pins (us IN) onnector M23 female 5-Pins (us Out) Profibus-P: Micro onnector (M2) male 5 pins (us IN) Micro onnector (M2) female 5 pins (us Out) evicenet: Micro onnector M2 male 5 pins (us) External Power Supply Voltage: 20.4 to 30V Electrical Power Supply onnection on Head Module: Micro onnector (M2) male 5 pins iagnostic us: 3 or 4 LE iagnostic Voltage: 2 LE EM Protection: IE 80-2 level 3 IE 80-3 level 3 IE 80-4 level 3 Number of Outputs: 6 Max. for evicenet, Interbus-S, Profibus-P (00% Rating) Note: or Installation Instructions (V-382P) and ES/S files, visit our website parker. com/pneumatic. lick on Solenoid/ir Operated Valves and then click on PVL0 or PVL0 Valves and finally click on Service/Maintenance. 29 Parker Hannifin orporation ivision

30 atalog 0600P-9/US imensions PVL (/8") Valve & Stacking System PVL Valves Single Solenoid Single Remote Pilot imensions E (Inline Pipe) 2.40 (6) (Inline Tube) 2.80 (7) (Stacking Pipe) 2.40 (6) (Stacking Tube) 2.68 (68) 5.9 (50) 4.25 (08) (20) (7) 3.74 (95) ouble Solenoid ouble Remote Pilot.5 (3).47 (2) E 2.7 (55) Inches (mm).7 (8).79 (20) H 3.58 (9) E /8" Pipe or /4" tube or 6mm tube for main ports. H 2 H 3 E Stacking System PVL T Single ir Supply E imensions.50 (38) 3.27 (83) 2.76 (70) *.7 (4.2).39 (0) E.47 (2).3 (8) /4" R.73 (44) S.35 (9) S R n valves T.43 () E ouble ir Supply Inches (mm) * learance for #6 screw. llen key (3 mm) n valves 30 Parker Hannifin orporation ivision

31 atalog 0600P-9/US imensions PVL (/4") Valve & Stacking System Single Solenoid PVL Valves Single Remote Pilot imensions (Inline Pipe) 2.87 (73) E (Inline Tube) 3.66 (93) (Stacking Pipe) 2.87 (73) (Stacking Tube) 3.27 (83) 7.00 (78) 5.35 (36) (227) (43) 4.84 (23).5 (3) E 2.7 (55).98 (25).00 (26) H 4.6 (7) ouble Solenoid ouble Remote Pilot.43 () Inches (mm) E /4" Pipe or 3/8" tube or 8mm tube for main ports. H 2 H 3 E T Single ir Supply E Stacking System PVL imensions.50 (38) 4.25 (08) (00) *.7 (4.2).39 (0) E.47 (2).3 (8) 3/8" R 2.7 (55) S.35 (9) S R n valves T.5 (3) E ouble ir Supply Inches (mm) * learance for #6 screw. llen key (4 mm) n valves 3 Parker Hannifin orporation ivision

32 atalog 0600P-9/US imensions Transition its Transition its PVL & PVL Valves 2 n Valves n Valves Screw river 5 imensions.98 (25) 2 3/8" 3.94 (00) Inches (mm).7 (4.2).47 (2) /4" 32 Parker Hannifin orporation ivision

33 atalog 0600P-9/US imensions PVL0 Modular Valve Stacking System Single Solenoid ouble Solenoid imensions /8" NPT (SP) or /4" Tube (6mm) /8" NPT (SP) or /4" Tube (6mm) (Inline Pipe) 2.87 (73) (Inline Tube) 3.66 (93) (Stacking Pipe) 2.87 (73) (Stacking Tube) 3.27 (83) 5.43 (38) 6.97 (77).93 (49) 3.46 (88) 3.50 (89).7 (8).79 (20).47 (2) Inches (mm) External onnection Modules Single ouble 2 mm (mini) emale onnector 2 mm (mini) emale onnector imensions 2.72 (69) 5.3 (35) 6.97 (77).8 (46) 3.46 (88) 3.50 (89).87 (22).47 (2) Inches (mm) Head / Tail Set.39 (0).5 (38).47 (2) /4" /4" n modules.5 (38).7 (4.2) 3mm llen ey 3.27 (83) To calculate stack length, add the width of the pneumatic and electrical head / tail sets plus (quantity x width) for each type of active module. Widths shown in inches (mm). Module Qty Width Total Width head / tail set x 3.00" (76) = 3.00" (76) Electrical head / tail set: x = Select 25-Pin head / tail.73" (44) or 25-Pin w/transition 2.60" (66) or 35-Pin head / tail 2.76" (70) or 35-Pin w/transition 3.62" (92) Valves x.7" (8) = eedback/output modules x.87" (22) = TOTL ST LENTH = 33 Parker Hannifin orporation ivision

34 atalog 0600P-9/US imensions PVL0 Modular Valve Stacking System Electrical Head / Tail Sets* Single Stack -Sub, 25-Pin onnector imensions 2.48 (63) 2.40 (60) 5.3 (35) 6.97 (77).8 (46) * When the stack contains both single and double modules, you must use a head / tail set that includes a size transition module (shown below) (88).47 (2) 3.50 (89).89 (48) Inches (mm) E.39 (0).87 (22) H.57 (40) ouble Stack -Sub, 25-Pin onnector ylindrical 35-Pin ouble Size Head / Tail Set H E Size Transition Module imensions.87 (22) 6.97 (77) Inches (mm) 34 Parker Hannifin orporation ivision

35 atalog 0600P-9/US imensions PVL0 Serial us Modules SI Head Module, 4 Input & 4 Output Version (PVL44 with Transition Module Shown) imensions 2.3 (59).75 (44) 2.88 (73) 3.50 (89) 6.00 (53).89 (48) 5.25 (33).87 (22) 2.50 (64).47 (2) Inches (mm) SI Head Module for Single to ouble Solenoid Valves, 4 Input and 4 Output Version PVL344 with Transition Modules Shown) imensions 2.3 (59) 3.47 (88) 2.88 (73) 3.50 (89) Inches (mm) 6.00 (53).89 (48) 6.97 (77).87 (22) 2.50 (64).47 (2) 35 Parker Hannifin orporation ivision

36 atalog 0600P-9/US imensions PVL0 Modular Valve Stacking System Single Solenoid ouble Solenoid 4 /4" NPT (SP) or 3/8" Tube (8mm) /4" NPT (SP) or 3/8" Tube (8mm) imensions (Inline Pipe) 2.87 (73) (Inline Tube) 3.66 (93) (Stacking Pipe) 2.87 (73) (Stacking Tube) 3.27 (83) 6.50 (65) 2.56 (65) 3.94 (00).00 (25.4).3 (33) Inches (mm).00 (25.4).47 (2) -Sub, 25-Pin onnector ylindrical onnector Ex Px 5 3 /4" NPT (SP) or 3/8" Tube (8mm) Ex Px 5 3 /4" NPT (SP) or 3/8" Tube (8mm) imensions imensions 2.75 (70) 6.22 (58) 2.28 (58) 3.94 (00).65 (42) 2.75 (70) 6.22 (58) 2.28 (58) 3.94 (00).65 (42).06 (27).39 (0).2 (3).06 (27).39 (0).30 (8) Inches (mm) Inches (mm) 36 Parker Hannifin orporation ivision

37 atalog 0600P-9/US imensions PVL0 Modular Valve Stacking System Intermediary ir Supply Module /4" NPT (SP) or 3/8" Tube (8mm) 5 3 imensions 2.94 (75) 6.22 (58) 2.28 (58) 3.94 (00).08 (28).06 (27).47 (2) Inches (mm) Transfer Module Ex Px 5 3 /4" NPT (SP) or 3/8" Tube (8mm) imensions 2.75 (70).06 (27) 6.22 (58).39 (0) Inches (mm) 2.28 (58) 3.94 (00).65 (42) 37 Parker Hannifin orporation ivision

38 atalog 0600P-9/US imensions PVL0 Serial us Modules SI Head Module, 4 Input & 4 Output Version (PVL44 with Transition Module Shown) imensions 2.3 (59) 2.88 (73) 6.00 (53) 5.25 (33) 2.50 (64).75 (44) 3.50 (89).89 (48).87 (22).47 (2) Inches (mm) SI Head Module for Single to ouble Solenoid Valves, 4 Input and 4 Output Version (PVL344 Shown) imensions 2.3 (59) 2.88 (73) 5.25 (33).75 (44) 3.50 (89).89 (48).47 (2) Inches (mm) 38 Parker Hannifin orporation ivision

39 atalog 0600P-9/US imensions PVL0 & PVL0 Serial us Modules evicenet, Profibus-P and Interbus-S Head Module US ERR ON POWER US OUT imensions 2.94 (75).89 (48) 4.38 ().47 (2) 5.25 (33).75 (44) 3.50 (89) Inches (mm) 39 Parker Hannifin orporation ivision

40 atalog 0600P-9/US Stacking System 35mm IN Rail ME200 6 eet Zinc chromated steel rail for easy mounting of stacks. IN rail can be mounted to grids or other surfaces to allow snap in mounting of pneumatic and electrical components. Stacking ccessories / Spare Parts 0.59 (5mm).38 (35mm) 0.06 (.5mm) dapter its ontains a size transition module and a replacement tail piece for field conversion to a combination stack. PVL940 PVL930 ouble then Single Single then ouble Pressure Isolation it Series Model Number it includes: PVL PVL90 3 Isolation Plugs, PVL PVL90 2 Open Port Plugs and 2 Extended ross Rods. PVL PVL PVL902 PVL902 0 Isolation iscs ssembly Instructions Example : Two different pressures P and P2 can supply the same bank of power valves, the exhausts remaining common. Valves 3 5 Example 2: omplete isolation of the commons in the same bank of power valves: main pressure and exhaust commons. Example 3: The exhaust commons can be isolated within the same bank of power valves, while the main pressure supply remains common Extended ross Rods 40 Parker Hannifin orporation ivision

41 atalog 0600P-9/US Stacking System Stacking ccessories / Spare Parts Seals and askets Series O-Rings askets 2 PVL PPRV23 PPRV20 PVL PPRV24 PPRV20 Series O-Rings PVL0 PVL0 PPRV23 PPRV24 PPRV23 PPRV20 Notes: O-rings seal between stackable valve bodies. Sold in set of cell gaskets seal between pilot and valve body. Sold as one set of 20 gaskets. ross Rods Series PVL PVL Used in valve stack mounting. Sold as set of 0 cross rods. Model Number PPRV2 PPRV22 IN Rail lip ssembly PPRL09 Head / Tail Set ll Sizes ssembly includes: clamp, screw, and spring. Sold as set of 20 each. 4 Parker Hannifin orporation ivision

42 atalog 0600P-9/US Notes 42 Parker Hannifin orporation ivision