PVL-B & PVL-C Inline valves. Stackable, Stand-alone and Valvetronic

Transcription

1 PVL-B & PVL-C Inline valves Stackable, Stand-alone and Valvetronic September 2009

2 Page No. Overview... 3 PVL-B / -C Order codes PVL-B / -C Modular piloting system... 7 PVL-C Modular piloting system... 8 PVL-B / -C Configurations - Order codes Connecting leads Technical characteristics Mounting Dimensions Important! Before carrying out any service work, ensure that the valve and manifold have been vented. Remove the primary supply air hose to ensure total disconnection of the air supply before dismantling valves or blank connection blocks. NB! All technical data in this catalogue is typical only. The air quality is decisive for the valve life: see ISO WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. SALE CONDITIONS The items described in this document are available for sale by, its subsidiaries or its authorized distributors. Any sale contract entered into by Parker will be governed by the provisions stated in Parker s standard terms and conditions of sale (copy available upon request). 2

3 PVL-B size 18 mm width PVL-C size mm width PVL -B12 / -C12 PVL -B11 / -C11 PVL -B10 / -C10 Stackable - Traditional wiring Series The PVL Series stacking system permits assembly of several valves into one stack. Supply is connected at either a single or a dual head/tail set. Two commons exhaust galleries are provided. Connections to outlet ports 2 and 4 on each valve can be accomplished by threaded pipe or instant tube fittings. Electrical connection is made to each solenoid utilizing a 15 mm - 3 pin - 8 mm spacing connector plug. Each stack assembly can handle any combination of the following valve types : - Single or double solenoid - Single or double Remote air Pilot Both PVL-B & PVL-C valve sizes can be combined in one stack using a transition kit. Stand- alone Series Very useful to control isolated cylinders, these stand-alone valve Series are compact and easy to mount on the machines close to the actuator with XXXX electrical or remote pneumatic pilot. Available with solenoid pilots traditional wiring or remote air pilot, these Series can also be stacked and mixed into a stacking valve island Series. Stackable - Valvetronic Series Including an integrated electrical connection, the Valvetronic Series allowed a multi-wiring connection. The construction of the stack determines the relationship of each connector pin and the device it is to control. The address of each solenoid valve and each feedack or output connection is based on its physical position in the stack. Electrical Inputs ans Outputs can also be added into the Valvetronic device both PVL6B and PVL-C valve sizes can be combined in one stack using a transition kit. 3

4 Stacking high fl ow valves with air pilot or solenoid actuation. Lightweight plastic bodies feature push-in or threaded connections. Stacking valves feature modular inlet and exhaust facility. High fl ow, compact size Push-in or threaded connection DIN rail or block mounting Light weight construction Head and tail sets and intermediate supply modules Symbol Type of mounting Description Valve Port Weight (g) Order code size size On DIN rail Single air supply PVL-B G1/4 175 PVL-B1719 head and tail set PVL-C G3/8 195 PVL-C1713 Dual air supply PVL-B G1/45 PVL-B1729 head and tail set PVL-C G3/8 285 PVL-C1723 Surface Single air supply PVL-B G1/8 175 PVL-B1818 head and tail set PVL-C G1/4 195 PVL-C1819 Dual air supply PVL-B G1/8 200 PVL-B1828 head and tail set PVL-C G1/ PVL-C1829 On DIN rail Intermediate PVL-B G1/8 260 PVU-LBB118 supply module PVL-C G1/80 PVU-LBB119 Spare mounting and assembly kits On DIN rail Kit for stacking PVL-C/B G1/4-G1/8 640 PVU-LCB119 Symbol Description Valve Port Weigth (g) Order code size size Kit for sealing the inlet/exhaust PVL-B 35 PVL-B1901 common gallery including : PVL-C 65 PVL-C common blanking plugs - 2 drilled and threaded rods - 2 screws for extended tie rod PVL-B & PVL-C Including : - 1 transfert / take-off module - 1 PVL-C head module - 1 PVL-B end plate Pack of 10 common blanking PVL-B 35 PVL-B1902 PVL-C 65 PVL-C1902 Pack of 10 stacking rods PVL-B 35 PPR-V21 PVL-C 65 PPR-V22 Pack of 20 rail clip assembly PVL-B / PVL-C - PPR-L09 Pack of 30 O-ring seals PVL-B - PPR-V23 for common inlet/exhaust ports PVL-C - PPR-V24 4

5 Stackable Series - PVL-B12 / C12 PVL-B & -C valve module for electric low power or air actuator Valve module without actuator For use with air-pilot connector or 1,2 W / 1,6 VA solenoid valve Symbol Description Valve type Connection Weight (g) Order code 4 2 5/2 single acting / Spring return PVL-B Push-in Ø 6 mm 1 PVL-B G 1/8 1 PVL-B PVL-C Push-in Ø 8 mm 240 PVL-C G 1/40 PVL-C G 3/8 240 PVL-C /2 single acting / Air spring return PVL-B Push-in Ø 6 mm 1 PVL-B G 1/8 1 PVL-B PVL-C Push-in Ø 8 mm 240 PVL-C G 1/40 PVL-C G 3/8 240 PVL-C /2 double acting PVL-B Push-in Ø 6 mm 120 PVL-B G 1/8 120 PVL-B PVL-C Push-in Ø 8 mm 230 PVL-C G 1/30 PVL-C G 3/8 230 PVL-C /3 APB (All Ports Blocked) PVL-B Push-in Ø 6 mm 130 PVL-B G 1/8 130 PVL-B PVL-C Push-in Ø 8 mm 0 PVL-C G 1/50 PVL-C /3 Vented centre PVL-B Push-in Ø 6 mm 130 PVL-B G 1/8 130 PVL-B PVL-C Push-in Ø 8 mm 0 PVL-C G 1/50 PVL-C Double 3/2 Normally closed (NC) PVL-B Push-in Ø 6 mm 130 PVL-B1606 G 1/8 130 PVL-B1618 PVL-C valve module for electric high power or air actuator Valve module without actuator For use with air-pilot connector or 6 W / 8,5 VA solenoid valve Symbol Description Valve type Connection Weight (g) Order code 5/2 single acting / Spring return PVL-C Push-in Ø 8 mm 0 PVL-C G 1/50 PVL-C /2 single acting / Air spring return PVL-C Push-in Ø 8 mm 0 PVL-C G 1/50 PVL-C /2 double acting PVL-C Push-in Ø 8 mm 0 PVL-C G 1/50 PVL-C Each valve module is supplied with two tie rods for use in the "stacking" system. The above valve operator can be either : - Pneumatic, by adding one or two air pilot connectors including a Ø4 mm push-in fitting or a threaded M5 port ; - Electric, by adding one or two 1,2 W / 1,6 VA solenoid (PVL-B or C) or 6 W / 8,5 VA (PVL-C). 5

6 Stand Alone Series - PVL-B11 / C11 PVL-B & -C valve module for electric low power or air actuator Valve module without actuator For use with air-pilot connector or 1,2 W / 1,6 VA solenoid valve Symbol Description Valve type Connection Weight (g) Order code 4 2 5/2 single acting / Spring return PVL-B Push-in Ø 6 mm 1 PVL-B G 1/8 1 PVL-B PVL-C Push-in Ø 8 mm 240 PVL-C G 1/40 PVL-C G 3/8 240 PVL-C /2 single acting / Air spring return PVL-B Push-in Ø 6 mm 1 PVL-B G 1/8 1 PVL-B PVL-C Push-in Ø 8 mm 240 PVL-C G 1/40 PVL-C G 3/8 240 PVL-C /2 double acting PVL-B Push-in Ø 6 mm 120 PVL-B G 1/8 120 PVL-B PVL-C Push-in Ø 8 mm 230 PVL-C G 1/30 PVL-C G 3/8 230 PVL-C /3 APB (All Ports Blocked) PVL-B Push-in Ø 6 mm 130 PVL-B G 1/8 130 PVL-B PVL-C Push-in Ø 8 mm 0 PVL-C G 1/50 PVL-C /3 Vented centre PVL-B Push-in Ø 6 mm 130 PVL-B G 1/8 130 PVL-B PVL-C Push-in Ø 8 mm 0 PVL-C G 1/50 PVL-C Double 3/2 Normally closed (NC) PVL-B Push-in Ø 6 mm 130 PVL-B G 1/8 130 PVL-B PVL-C valve module for electric high power or air actuator Valve module without actuator For use with air-pilot connector or 6 W / 8,5 VA solenoid valve Symbol Description Valve type Connection Weight (g) Order code 5/2 single acting / Spring return PVL-C Push-in Ø 8 mm 0 PVL-C G 1/50 PVL-C /2 single acting / Air spring return PVL-C Push-in Ø 8 mm 0 PVL-C G 1/50 PVL-C /2 double acting PVL-C Push-in Ø 8 mm 0 PVL-C G 1/50 PVL-C Each valve module is supplied with two tie rods for use in the "stacking" system. The above valve operator can be either : - Pneumatic, by adding one or two air pilot connectors including a Ø4 mm push-in fitting or a threaded M5 port ; - Electric, by adding one or two 1,2 W / 1,6 VA solenoid (PVL-B or C) or 6 W / 8,5 VA (PVL-C). 6

7 PVL - Traditional Wiring Series Modular piloting system PVL-B & PVL-C valve module for air-pilot connector or 1,2 W / 1,6 VA solenoid valve PVL-B - G1/8 or Low power 15 mm solenoid valve connector + 15 mm connector IP65 P2E-KVx + P8x-x Option : Protection P8V-CRx PVL-C - G1/4 Air pilot actuator PVA=P11x or Air-pilot actuator for PVL-B and PVL-C valve Symbol Description Pneumatic connection Weight (g) Order code Air-pilot actuator Push-in Ø 4 mm XXXX PVA-P111 for PVL-B & PVL-C 15mm solenoid body Threaded M5 XXXX PVA-P115 Solenoids 15mm 1,2 W / 1,6 VA (8mm pin spacing) Manual override Spring return Indexing Description Voltage Weight (g) Order code Order code 3/2 normally closed 12 VDC 38 P2EKV32B1 P2E-KV32B2 24 VDC 38 P2EKV32C1 P2E-KV32C2 48 VDC 38 P2EKV32D1 P2E-KV32D2 24 V 50/60Hz 38 P2EKV31C1 P2E-KV31C2 48 V 50/60Hz 38 P2EKV34D1 P2E-KV34D2 115 V 50Hz, 120 V 60Hz 38 P2EKV31F1 P2E-KV31F2 230 V 50Hz, 240 V 60Hz 38 P2EKV31J1 P2E-KV31J2 Pack of 20 seals All solenoids PPR-V20 Cable plugs 15 mm - IP65 (8mm pin spacing) Description Electrical protection Cable length Weight (g) Order code Large headed screw No protection No cable XXXX P8C-C For inaccessible or recess position LED + Protection 24 VDC No cable XXXX P8C-C26C Standard screw No protection No cable XXXX P8C-D 2 m cable XXXX P8L-C2 5 m cable XXXX P8L-C5 LED + Protection 24 VDC No cable XXXX P8C-D26C LED + Protection 24 VDC/AC 2 m cable XXXX P8L-C226C 5 m cable XXXX P8L-C526C 7

8 PVL - Traditional Wiring Series Modular piloting system PVL-C valve module for air-pilot connector or 6 W / 8,5 VA solenoid valve PVL-B - G1/8 or Air pilot actuator PVA=P21x High power 22 x 30mm solenoid valve actuator + 22 x 30mm connector IP65 PVA-F19x + PES-Ax = PVA-F10x Air-pilot actuator Description Pneumatic connection Weight (g) Order code Air-pilot actuator Push-in Ø 4 mm - Elbow XXXX PVA-P121 for PVL-C 22 x 30 solenoid body Push-in Ø 4 mm - Swivel XXXX PVA-P122 Pack of 50 O-ring seals Solenoids 22 X 30 6 W / 8,5 VA Without manual override Electrical connector 22 x 30 mm Threaded M5 XXXX PVA-P1 PPR-V Description Voltage Weight (g) Order code Solenoid valve 22 x 30mm 12 VDC XX P2E-KV32B2 Without cable connector 24 VDC XX P2E-KV32C2 48 VDC XX P2E-KV32D2 24 V 50/60Hz XX P2E-KV31C2 48 V 50/60Hz XX P2E-KV34D2 115 V 50Hz, 120 V 60Hz XX P2E-KV31F2 230 V 50Hz, 240 V 60Hz XX P2E-KV31J2 Description Electrical protection Cable length Weight (g) Order code Connector to be wired No protection No cable XXXX PES-A10 LED + Protection 24 V AC/DC No cable XXXX PES-A2020B LED + Protection 230 V AC No cable XXXX PES-A2001M Connector with 2 m cable No protection No cable XXXX PES-A12 (earth terminal opposite cable) LED + Protection 24 V AC/DC No cable XXXX PES-A2220B Solenoids 22 x 30-6 W / 8,5 VA - Equipped with cable connector (Without manual override) Cable length Without cable 2 meters 5 meters Description Voltage Order code Order code Order code Solenoid valve 22 x 30mm 24 VDC PVA-F102B PVA-F102B0 PVA-F102B1 With cable connector 48 VDC PVA-F102E PVA-F102E0 PVA-F102E1 24 V 50/60Hz PVA-F101B PVA-F101B0 PVA-F101B1 48 V 50/60Hz PVA-F101E PVA-F101E0 PVA-F101E1 115 V 50Hz, 120 V 60Hz PVA-F101F PVA-F101F0 PVA-F101F1 230 V 50Hz, 240 V 60Hz PVA-F101M PVA-F101M0 PVA-F101M1 5 V 50Hz PVA-F101U PVA-F101U0 PVA-F101U1 * Version available for use in explosive atmospheres : - conforming to certification LCIE X. - electrical equipment conforming to harmonised European standards - marking code EExe II T4 (Consult Technical Sales Office). EN dated March 1977 (NFC dated May 1982) EN dated March 1977 (NFC dated May 1982) 8

9 5 1 3 High fl ow, compact light weight Push-in or threaded pneumatic connections High performance 15 mm solenoid DIN C 2 x 3/2-5/2-5/3 functions Electrical head connection by Sub D or Industrial Cylindrical Connection Surface or DIN rail 35 mm mounting PVL-B10 configurations : Up to 16 valves or 32 I/O maximum Configuration with single solenoid only Configuration with single + double solenoid With SubD or cylindrical 19 pins connector 16 valves or 16 I/O With SubD or cylindrical 19 pins connector 16 valves or 16 I/O Configuration with double solenoid only Configuration with double + single solenoid With SubD connector 10 valves or 20 I/O With cylindrical 35 pins connector 16 valves or 32 I/O With SubD connector 16 valves or 21 I/O With cylindrical 35 pins connector 16 valves or 32 I/O PVL-C10 configurations : Up to 16 valves PVL-B10 / PVL-C10 association Ex passage Px passage PVL-C2713B19 5/2 Bistable Intermediary air supply Module Anchoring end plates PVL-C10 1/4" Electro Pneumatic Head Module 5/2 Monostable Common Electrical Head Connection PVL-B10 1/8" Electrical connecting leads 9

10 Pneumatic head and tail sets Description External pilot Mounting Pneu.Connect. Valve size Weight (g) Order code PVL-B1729 PVL-B1719 Single supply Without PX* On DIN rail G1/4 PVL-B PVL-B1719 surface G1/8 PVL-B PVL-B1818 Dual air supply Without PX* On DIN rail G1/4 PVL-B PVL-B1729 surface G1/8 PVL-B PVL-B1828 HE10 with cable gland Without PX* G3/8 PVL-C10 XXX PVLC1713H20A With PX* G3/8 PVL-C10 XXX PVLC2713H20A Pins D-Sub Without PX* G3/8 PVL-C10 XXX PVLC1713DA With PX* G3/8 PVL-C10 XXX PVLC2713DA 19 Pins Without PX* G3/8 PVL-C10 XXX PVLC1713C19A cylindrical connection With PX* G3/8 PVL-C10 XXX PVLC2713C19A Tall air feed module G3/8 PVL-C10 XXX PVU-LC213** Intermediary air supply module G3/8 PVL-C10 XXX PVU-LC213E*** Combination kit Without PX* G1/4 & G3/8 PVL-B10 / C PVL-C1713B19 for PVL-B10 / PVL-C10 With PX* G1/4 & G3/8 PVL-B10 / C PVL-C2713B19 Ex = to collect the exhausts of the solenoids * Px = auxilliary air supply for solenoids, separately from the main valves air supply ** To be mounted at the end of the valve island for dual air supply (without electrical connections) *** For dual air supply or different supplies, with no defined location in the valves island (with connections fitted) Electric head and tail sets Description Valve configuration Type of connector Weight (g) Order code PVL-B1911 PVL-B Head and tail Monostable Sub-D 220 PVL-B1911 sets Cylindrical 19-pins 0 PVL-B Bistable Sub-D 220 PVL-B1921 Cylindrical 35-pins 0 PVL-B Head and tail Bistable then Sub-D 370 PVL-B1941 sets monostable Cylindrical 35-pins 420 PVL-B Monostable Sub-D 320 PVL-B1931 then bistable Cylindrical 19-pins 350 PVL-B Transfering Bistable then monostable 220 PVL-B1940 module Monostable then bistable 240 PVL-B1930 Spare mounting and assembly kits Description Valve Port Weight (g) Order code size size Kit for sealing the inlet/exhaust PVL-B 35 PVL-B1901 common gallery including : PVL-C 65 PVL-C common blanking plugs - 2 drilled and threaded rods - 2 screws for extended tie rod Pack of 10 common blanking PVL-B 35 PVL-B1902 PVL-C 65 PVL-C1902 Pack of 10 stacking rods PVL-B 35 PPR-V21 PVL-C 65 PPR-V22 Pack of 20 rail clip assembly PVL-B / PVL-C - PPR-L09 Pack of 30 O-ring seals PVL-B - PPR-V23 for common inlet/exhaust ports PVL-C - PPR-V24 10

11 PVL-B10 & PVL-C10 valve module with 24 V DC solenoid pilot equipped Symbol Description Valve type Connection Weight (g) Order code PVL-B10 single solenoid PVL-B10 double solenoid PVL-C10 single solenoid PVL-C10 double solenoid (1) With override non locking flush (2) With override locking flush Double 3/2 NC PVL-B10 Ø 6 mm 150 PVL-B B G1/8 150 PVL-B B PVL-C10 Ø 8 mm 150 PVL-C B G1/4 150 PVL-C B 5/2 single solenoid PVL-B10 Ø 6 mm 1 PVL-B B Spring return G1/8 1 PVL-B B PVL-C10 Ø 8 mm 1 PVL-C B G1/4 1 PVL-C B 5/2 single solenoid PVL-B10 Ø 6 mm 1 PVL-B B Internal air return G1/8 1 PVL-B B PVL-C10 Ø 8 mm 150 PVL-C B G1/4 150 PVL-C B 5/2 double solenoids PVL-B10 Ø 6 mm 150 PVL-B B G1/8 150 PVL-B B PVL-C10 Ø 8 mm 150 PVL-C B G1/4 150 PVL-C B 5/3 all ports blocked PVL-B10 Ø 6 mm 150 PVL-B B G1/8 150 PVL-B B PVL-C10 Ø 8 mm 150 PVL-C B G1/4 150 PVL-C B 5/3 vented center PVL-B10 Ø 6 mm 150 PVL-B B G1/8 150 PVL-B B PVL-C10 Ø 8 mm 150 PVL-C B G1/4 150 PVL-C B 5/3 pressurized center PVL-B10 Ø 6 mm 150 PVL-B B G1/8 150 PVL-B B PVL-C10 Ø 8 mm 150 PVL-C B G1/4 150 PVL-C B PVL-B10 Electrical Input/Output module Description Type Connection Weight Order code kg PVL-B1E1302 PVL-B1S1302 Input module PVL-B monostable 2 Inputs 0,180 PVL-B1E1302 PVL-B bistable 4 Inputs 0,240 PVL-B1E2304 Output module PVL-B monostable 2 Outputs 0,180 PVL-B1S1302 PVL-B1E2304 PVL-B1S2304 PVL-B bistable 4 Outputs 0,240 PVL-B1S2304 External input module connection 2 or 4 inputs wires PNP sensor 2 wires sensor External output module connection 2 or 42 outputs or 4 outputs = 24 V supply = Free 2 = Free 2 = Free 3 = 0 V 3 = 0 V valves = Signal 4 = Output signal 11

12 PVL-B10 & PVL-C10 valve module without solenoid pilot PVL-B10 single solenoid PVL-B10 double solenoid PVL-C10 single solenoid PVL-C10 double solenoid (1) With override non locking flush (2) With override locking flush Electronic circuit board voltage For DC solenoid For AC solenoid Symbol Description Valve type Connection Weight (g) Order code Order code Solenoids 15mm 8mm pin spacing - 1,2 W / 1,6 VA Double 3/2 NC PVL-B10 Ø 6 mm 150 PVL-B105606W2 PVL-B105606W1 G1/8 150 PVL-B105618W2 PVL-B105618W1 PVL-C10 Ø 8 mm 150 PVL-C105608W2 PVL-C105608W1 G1/4 150 PVL-C105619W2 PVL-C105619W1 5/2 single solenoid PVL-B10 Ø 6 mm 1 PVL-B101606W2 PVL-B101606W1 Spring return G1/8 1 PVL-B101618W2 PVL-B101618W1 PVL-C10 Ø 8 mm 1 PVL-C101608W2 PVL-C101608W1 G1/4 1 PVL-C101619W2 PVL-C101619W1 5/2 single solenoid PVL-B10 Ø 6 mm 1 PVL-B103606W2 PVL-B103606W1 Internal air return G1/8 1 PVL-B103618W2 PVL-B103618W1 PVL-C10 Ø 8 mm 150 PVL-C103608W2 PVL-C103608W1 G1/4 150 PVL-C103619W2 PVL-C103619W1 5/2 double solenoid PVL-B10 Ø 6 mm 150 PVL-B102606W2 PVL-B102606W1 G1/8 150 PVL-B102618W2 PVL-B102618W1 PVL-C10 Ø 8 mm 150 PVL-C102608W2 PVL-C102608W1 G1/4 150 PVL-C102619W2 PVL-C102619W1 5/3 all ports blocked PVL-B10 Ø 6 mm 150 PVL-B107606W2 PVL-B107606W1 G1/8 150 PVL-B107618W2 PVL-B107618W1 PVL-C10 Ø 8 mm 150 PVL-C107608W2 PVL-C107608W1 G1/4 150 PVL-C107619W2 PVL-C107619W1 5/3 vented center PVL-B10 Ø 6 mm 150 PVL-B108606W2 PVL-B108606W1 G1/8 150 PVL-B108618W2 PVL-B108618W1 PVL-C10 Ø 8 mm 150 PVL-C108608W2 PVL-C108608W1 G1/4 150 PVL-C108619W2 PVL-C108619W1 5/3 pressurized center PVL-B10 Ø 6 mm 150 PVL-B109606W2 PVL-B109606W1 G1/8 150 PVL-B109618W2 PVL-B109618W1 PVL-C10 Ø 8 mm 150 PVL-C109608W2 PVL-C109608W1 G1/4 150 PVL-C109619W2 PVL-C109619W1 Manual override type: Without Non locking Locking Flush Flush Voltage Weight (g) Order code Order code Order code P2E-KS32C1 Maintenance (Solenoid pin spacing) 12 VDC 38 P2E-KS32B0 P2E-KS32B1 P2E-KS32B2 24 VDC 38 P2E-KS32C0 P2E-KS32C1 P2E-KS32C2 48 VDC 38 P2E-KS32D0 P2E-KS32D1 P2E-KS32D2 24 V 50Hz 38 P2E-KS31C0 P2E-KS31C1 P2E-KS31C2 48 V 50/60Hz 38 P2E-KS34D0 P2E-KS34D1 P2E-KS34D2 115 VAC 50Hz/ 38 P2E-KS31F0 P2E-KS31F1 P2E-KS31F2 220 VAC 50Hz/ 38 P2E-KS31J0 P2E-KS31J1 P2E-KS31J2 The electro-pneumatic PVL-B & PVL-C modules have been re-designed to accept both 8mm and 9,4mm solenoid pin spacing. If you are purchasing a solenoid for maintenance on an electro-pneumatic interface module purchased before June 2004, above solenoid P2E-KS3xxx (8mm pin spacing) will not be compatible. Please, contact your Parker customer service. Spare set of solenoid mounting screws Type Material Ø mm Length (mm) Weight (g) Order code Metric Steel, passivated M P2E-KP026PM3* Self tapping Steel, passivated Ø 3 mm 20 P2E-KP0PS3* Correspondence table between screws and valves series Valvetronic series Description Mounting screw length Order code (Mounting Screw Kit) PVL-B10 Valvetronic 1/8" 26 mm P2E-KP026PM3 PVL-C10 Valvetronic 1/4" 26 mm P2E-KP026PM3 12

13 Leads and connector (plugged in) Protection level IP 65 Suitable for use across the Valvetronic Modular program HE 10 for budget cable gland version Sub D for compact version Cylindrical 19 or 35 pins for heavy duty industrial General characteristics Working temperature -15 C to 60 C Working current; AWG20 5 A AWG24 2,5 A AWG28 1 A Type Connection to Connection to the Lenght Weight Order code valve island control system m kg HE10/HE10 coloured wires AWG 24 5,0 0,510 P8L-MH20A5 female 9,9 1,010 P8L-MH20A9 HE10 20 pins for direct 1,5 0,160 P8L-MH20A1BH20A plug-in connection on PLC AWG24 3,0 0,310 P8L-MH20A3BH20A 5,0 0,510 P8L-MH20A5BH20A 9,9 1,010 P8L-MH20A9BH20A Type Connection to Connection to the Lenght Weight Order code valve island control system m kg Leads for head 20 coloured wires AWG 24 5,0 0,540 P8L-MDA5B module with 9,9 1,040 P8L-MDA9B Sub D 15,0 1,540 P8L-MDACB female wires roles flat ribbon AWG 28 5,0 0,540 P8L-MDA5 9,9 0,540 P8L-MDA9 HE10 20 pins for direct 1,5 0,160 P8L-MDA1BH20A plug-in connection on PLC 3,0 0,310 P8L-MDA3BH20A 5,0 0,510 P8L-MDA5BH20A 9,9 1,010 P8L-MDA9BH20A Type Connection to Connection to the Lenght Weight Order code valve island control system m kg Cylindric 19 pins max. Ø cable = 16 mm To be wired 0,060 P8C-MC19A connector 35 pins max. Ø cable = 22 mm To be wired 0,090 P8C-MC35A Leads with cylindric 19 coloured wires AWG 20 (16 outputs) 5,0 P8L-MC19A5 max. Ø cable = 12 mm 9,9 P8L-MC19A9 Connection 35 coloured wires AWG 20 (32 outputs) 5,0 P8L-MC35A5 max. Ø cable = 15 mm 9,9 P8L-MC35A9 13

14 Valvetronic Series - PVL-B10 & C10 Wiring connection for cable gland and Sub D with AWG 24 wire Colour Input or Sub D HE10 Output N Pin Nr Pin Nr Colour Input or Sub D HE10 Output Nr Pin Nr Pin Nr Green Tranparent 1 2 Dark blue Light blue Pink Purple Dark green/black Yellow Light green/black Yellow/black Blue/Black White/Black Khaki Orange White Grey Red/Black Free 5 17 Red 24 V Brown 0 V 4 18 Black 0 V * * Red wire for flat ribbon cable Wiring connection for Sub D with rolled flat ribbon AWG 28 wires Colour Nr of Ribbon Sub D Input/ wires after Pin Nr Output Nr red wire Grey Grey 23 1 Grey Grey Grey Grey Grey Grey Grey Grey Grey Grey Grey Colour Nr of Ribbon Sub D Input/ wires after Pin Nr Output Nr red wire Grey Grey Grey Grey 8 5 Free Grey V Grey V Inputs Grey V Valves Grey Grey Grey Grey Red 0 (Red wire) 1 20 Wiring connection for cylindrical 19 or 35 pins with AWG 20 wires I/O Colour Connector Nr Pin Nr I/O Colour Connector Nr Pin Nr I/O Colour Connector Nr Pin Nr I/O Colour Connector Nr Pin Nr 0 Pink-Brown A A 9 Violet K K 18 White-Black - V 27 Yellow-Grey - e 1 White-Green B B 10 Blue L L 19 Brown-Blue - W 28 Yellow-Pink - f 2 White-Yellow C C 11 Pink M M 20 Brown-Red - X 29 Yellow-Blue - g 3 White-Grey D D 12 Grey N N 21 Brown-Black - Y 30 Yellow-Red - h 4 White-Pink E E 13 Yellow P P 22 Grey-Green - Z 31 Yellow-Black - i 5 Brown-Green F F 14 White R R 23 Pink-Green - a 0 V valves Black T j 6 Red-Blue G G 15 Green S S 24 Green-Blue - b 0 V inputs Brown U k 7 Grey-Pink H H 16 White-Blue - T Green-Red - c 24 V inputs Red V m 8 Yellow-Brown J J 17 White-Red - U 26 Green-Black - d 14

15 Valvetronic Series - PVL-B10 & C10 Materials: Body... Glass filled polyamide Seals... Polyurethane Fittings... Brass Materials: Inline... Surface mount on flat surface Stacking... Mount on 35mm DIN rail or flat surface Orientation... All positions Technical characteristics Description 1/8" Valves 1/4" Valves PVL-B11 - PVL-B12 - PVL-B10 PVL-C11 - PVL-C12 - PVL-C10 Fluid Air or inert gas, filtered 40µ, dry or lubricated Working pressure 3 to 10 bar 2 to 10 bar 3 to 10 bar 2 to 10 bar Flow rate Nominal Qn 540 Nl/mn 1100 Nl/mn Maximum Qmax 900 Nl/mn 1800 Nl/mn Threaded connector Instant tube fitting PE = Inlet pressure PS = Outlet pressure Valve port size Instant tube fitting 6mm 8mm Thread 1/8" 1/4" Head & tail port size 1/4" 3/8" Operating temperature Stocking temperature Vibration resistance Impact resistance -15 O C to +60 O C -40 O C to +70 O C 2g at 2 to 150 Hz according to IEC g 11ms according to IEC For air operated valves Single acting Double acting Single acting Double acting Pilot pressure (at 6 bar inlet) 3 bar 2 bar 3 bar 2 bar Depilot pressure (at 6 bar inlet) 1 bar - 1 bar - Response time (Pilot / Return) 15 / 30 ms 12 ms 26 / 60 ms 17 ms Maximum operating frequency 5 Hz 10 Hz 5 Hz 10 Hz For 15mm solenoid operated valves Single acting Double acting Single acting Double acting Response time (Pilot / Return) 15 / 30 ms 12 ms 26 / 60 ms 17 ms Maximum operating frequency 5 Hz 10 Hz 5 Hz 10 Hz Power consumption hold DC = 1,2 watt / AC = 1,6 VA Power consumption inrush DC = 1,2 watt / AC = 3,5 VA Voltage tolerance +10% / -15% of rated voltage (at 20 O C) Standard voltage DC Voltage 12 VDC / 24 VDC / 48 VDC AC Voltage 24 VAC / 48 VAC / 115 VAC / 230 VAC Protection rating IP65 15

16 Stackable versions Mounting on 35 mm DIN Rail Valve stacks mount quickly and easily to 35 mm DIN rail with the use of a pneumatic head / tail set. The dual head / tail set provides input and exhaust ports at both ends and is recommended if more than 5 valves are to be operated simultaneously. Mounting Procedure 1 - Clip on and tighen the pneumatic head piece. Surfacing Mounting Stacks may be surface mounted by removing the 35 mm DIN mounting hardware on the pneumatic head / tail set. 2 - Assemble the two parallel mounting rods using cross rod provided with modules. 1 module Removal or Replacement Modules are removed in reverse of the order shown at right. Before removing a module for service or replacement, loosen the pneumatic tail piece. 3 - Clip on the pneumatic tail piece. Start screws into mounting rod but leave loose for modules insertion. 4 - To mount valves, position upper slot then push-lock lower slot. Mount modules (valves, modules, transition pieces, etc...) and press together. A O-rings C B 5 - Tighten the assembly. 16

17 Dimensions Stand-alone power valves 1/8" without piloting accessories Monostable PVL-B1116, PVL-B1136 Bistable PVL-B ,5 26, Ø4, /8"BSP G1/ Stacking power valves 1/8" with pneumatic or electrical piloting Monostable PVL-B1216, PVL-B /8" BSP G1/8 ou or Ø6mm /8" BSP G1/8 ou or Ø6 Ø6mm mm Bistable PVL-B /8" BSP G1/8 ou or Ø6mm mm /8" BSP G1/8 ou or Ø6 Ø6mm mm ,5 26, Ø4,2 22 Ø6mm

18 Dimensions Stand-alone power valves 1/4" without piloting accessories Monostable PVL-C1116, PVL-C1136, PVL-C1114, PVL-C1134 Bistable PVL-C1126, PVL-C Ø4,2 a 1/4"BSP G1/4 or or G 3/8" BSP Ø4,2 83 Ø8 mm G1/4 G3/8 a Stacking power valves 1/4" with pneumatic or electrical control With 1 W solenoid actuator and suitable pneumatic connector Monostable PVL-C1216, PVL-C1236 Bistable PVL-C /4" BSP G1/4 or ou Ø8 Ø8mm 55 1/4" BSP G1/4 or ou Ø8mm mm 13 1/4" G1/4, BSP, 3/8" BSP G3/8 or or Ø8 Ø8mm mm 55 1/4" G1/4, BSP, 3/8" BSP G3/8 or or Ø8mm mm , , , , b b 11 G1/4 G3/8 b With 5W solenoid actuator and suitable pneumatic connector Monostable PVL-C1214, PVL-C1234 Bistable PVL-C G1/4, 1/4" BSP, 3/8" BSP G3/8 or or Ø8 Ø8mm /4" G1/4, BSP, 3/8" BSP G3/8 or or Ø8mm /4" G1/4, BSP, 3/8" G3/8 BSP or or Ø8 Ø8mm mm G1/4, 1/4" BSP, 3/8" G3/8 BSP or or Ø8 Ø8mm mm b 11 b b b 11 18

19 Dimensions Head and tail sets Single air supply PVL-B1719, PVL-C1713, mounting on DIN rail Dual air supply PVL-B1729, PVL-C1723, mounting on DIN rail d g G1 G1 t d g G1 G1 Allen clé 6 key pans (1/8": 3 : 3 mm-1/4": 4 mm) : 4 mn) b1 b c a n modules f s r G1 a n modules a tournevis Ø5 screwdriver Single air supply PVL-B1818, PVL-C1819, stack mounting K b1 u u Ø4,2 a1 n modules f V G2 a a1 b b1 c d f g G1 G2 k r s t u v 1/8" , /4" 1/8" 17, /4" , /8" 1/4" 63, Transfer / take-off module, intermediate supply module For combination of sizes 1/4" - 1/8" - PVU-LCB119 PVUL-BB118 - PVU-LCC119 G 2 G 1 G 1 G c c b b a b G 1/8" /8" g n modules a n modules g Tournevis Ø5 screwdriver Ø 5 a 1/4" 100 1/4" 19

20 Dimensions Dimensions, Valvetronic PVL-B10 Uniform configuration L = (n x 18)* Mixed configuration L = (n x 18)* L G1/4 83 4,2 Ø 8 38 G1/ n = number of valves * calculation for one bus Connector 19 pins a = 90 b = 31 Connector 35 pins a = 115 b = 41 Cable 19 pins a = 60 b = 31 Øc = 12 Cable 35 pins a = 70 b = 41 Øc = Ø c b a 48 20

21 , ,4 4, , Dimensions Dimensions, Valvetronic PVL-C10 Head modules : SubD connector Cylindrical connector Cable gland Intermediary air supply module Transfer Module from PVL-B10/PVL-C10 and Head ASI bus / Air feed module PVL-C , Valve 5/2 monostable Valve 5/2 bistable - 2x3/2-5/

22 Dimensions Dimensions, Valvetronic PVL-C10 Association PVL-B10 G1/8 and PVL-C10 G1/4 22

23 FLUIDTECHNIK BOHEMIA, s. r. o., Olomoucká 87, BRNO, tel.: , , fax: NOVÉ MÌSTO NAD METUJÍ Vrchoviny 29, ,tel./fax: , tel.: OPAVA Hradecká 668/1, , tel.: , fax: LOUNY Vladimírská 2457, , tel./fax: NON STOP linka technické podpory: