Solenoid valves "OPTYMA32-S" General. Series 2200
|
|
|
- Jessica O’Connor’
- 6 years ago
- Views:
Transcription
1
2 1 Solenoid valves "OPTYMA32-S" General Series
3 Series 2200 Solenoid valves "OPTYMA32-S" Solenoid - Spring v v VOLTAGE 02 = 24 VDC PNP Weight gr. 67 SHORT FUNCTION CODE "A" Operational characteristic Serie Solenoid 2200-S-GB valves - Spring "OPTYMA32-S" Fluid Filtered and lubricated air or non Pressure range From vacuum to 10 bar Flow rate at 6 bar with p=1 400 Nl/min Responce time according to ISO T.R.E. 12 ms T.R.D. 20 ms Pressure range pilots ,5-7 bar Temperature Min. Max. -5 C +50 C Solenoid - Differential v v VOLTAGE 02 = 24 VDC PNP Weight gr. 67 SHORT FUNCTION CODE "B" Operational characteristic Solenoid valves - Differential "OPTYMA32-S" Fluid Filtered and lubricated air or non Pressure range From vacuum to 10 bar Flow rate at 6 bar with p=1 400 Nl/min Responce time according to ISO T.R.E. 20 ms T.R.D. 25 ms Pressure range pilots ,5-7 bar Temperature Min. Max. -5 C +50 C Solenoid - Solenoid v v VOLTAGE 02 = 24 VDC PNP Weight gr. 67 SHORT FUNCTION CODE "C" Operational characteristic Solenoid valves - Solenoid "OPTYMA32-S" Fluid Filtered and lubricated air or non Pressure range From vacuum to 10 bar Flow rate at 6 bar with p=1 400 Nl/min Responce time according to ISO T.R.E. 10 ms T.R.D. 10 ms Pressure range pilots ,5-7 bar Temperature Min. Max. -5 C +50 C 2
4 Solenoid valves "OPTYMA32-S" Series 2200 Solenoid - Solenoid - (5/3 Closed centres) v v VOLTAGE 02 = 24 VDC PNP Weight gr. 83 SHORT FUNCTION CODE "E" Operational characteristic Solenoid - valves Solenoid "OPTYMA32-S" - (5/3 Closed centres) Fluid Filtered and lubricated air or non Pressure range From vacuum to 10 bar Flow rate at 6 bar with p=1 200 Nl/min Responce time according to ISO T.R.E. 15 ms T.R.D. 20 ms Pressure range pilots ,5-7 bar Temperature Min. Max. -5 C +50 C Solenoid - Solenoid 2x3/ f.35.v FUNCTION 44 = NC - NC (5/3 Open centres) 55 = NO - NO (5/3 Pressured f centres) 45 = NC - NO (Normally Closed - Normally Open) 54 = NO - NC (Normally Open - Normally Closed) v VOLTAGE 02 = 24 VDC PNP Weight gr. 75 SHORT FUNCTION CODE: NC-NC (5/3 Open centres) = "F" NO-NO (5/3 Pressured centres) = "G" Operational characteristic Solenoid valves - Solenoid "OPTYMA32-S" 2x3/2 Fluid Filtered and lubricated air or non Pressure range From vacuum to 10 bar Flow rate at 6 bar with p=1 360 Nl/min 14 Responce time according to ISO T.R.E. 15 ms T.R.D. 25 ms Pressure range pilots ,5-7 bar SHORT FUNCTION CODE: NC-NO = "H" NO-NC ="I" Temperature Min. -5 C Max. +50 C Closing plate Weight gr. 30 SHORT FUNCTION CODE "T" Operational characteristic Accessories Serie Solenoid Closing 2200-S-GB plate valves "OPTYMA32-S" - Accessories Fluid Pressure range Temperature Filtered and lubricated air or non From vacuum to 10 bar Min. -5 C Max. +50 C 3
5 Series 2200 Solenoid valves "OPTYMA32-S" Accessories Modular base for monostable solenoid valve (2 places) 224t.01M t CONNECTIONS 4 = Quick fitting tube Ø 4 6 = Quick fitting tube Ø 6 Weight gr. 75 SHORT FUNCTION CODE "3" (tube Ø 4) SHORT FUNCTION CODE "5" (tube Ø 6) Operational characteristic Solenoid Accessories Modular base valves for "OPTYMA32-S" monostable solenoid valve (2 places) Fluid Pressure range Temperature Filtered and lubricated air or non From vacuum to 10 bar Min. -5 C Max. +50 C Modular base for bistable solenoid valve (2 places) 224t.01B t CONNECTIONS 4 = Quick fitting tube Ø 4 6 = Quick fitting tube Ø 6 Weight gr. 75 SHORT FUNCTION CODE "4" (tube Ø 4) SHORT FUNCTION CODE "6" (tube Ø 6) Operational characteristic Solenoid Accessories Modular base valves for "OPTYMA32-S" bistable solenoid valve (2 places) Fluid Pressure range Temperature Filtered and lubricated air or non From vacuum to 10 bar Min. -5 C Max. +50 C Intermediate Inlet/Exhaust module Weight gr. 105 SHORT FUNCTION CODE "W" Operational characteristic Solenoid Accessories Intermediate valves Inlet/Exhaust "OPTYMA32-S" module Fluid Pressure range Temperature Filtered and lubricated air or non From vacuum to 10 bar Min. -5 C Max. +50 C 4
6 Solenoid valves "OPTYMA32-S" Accessories Series 2200 Left Endplates - External pilot base c CONNECTOR TYPE 37P = Connector 37 poles PNP c 25P = Connector 25 poles PNP Weight gr /14 separated from port 1 Operational characteristic Accessories Serie Solenoid Left Endplates 2200-S-GB_Terminali+Tiranti valves - External "OPTYMA32-S" pilot base - Accessories Fluid Filtered and lubricated air or non Pressure range From vacuum to 10 bar Pressure range pilots bar Temperature Min. Max. -5 C +50 C Left Endplates - Self-feeding base c CONNECTOR TYPE c 37P = Connector 37 poles PNP 25P = Connector 25 poles PNP Weight gr /14 connected to port 1 Operational characteristic Solenoid Accessories Left Endplates valves - "OPTYMA32-S" Self-feeding base Fluid Filtered and lubricated air or non Pressure range From vacuum to 10 bar Pressure range pilots bar Temperature Min. Max. -5 C +50 C Right Endplates c c CONNECTOR TYPE 00 = Exhaust electrical connection closed 25P = Connector 25 poles PNP Weight gr. 147 Operational characteristic Solenoid Accessories Right Endplates valves "OPTYMA32-S" Fluid Pressure range Temperature Filtered and lubricated air or non From vacuum to 10 bar Min. -5 C Max. +50 C 5
7 Series 2200 Solenoid valves "OPTYMA32-S" Accessories Tie-rod M3 p 2240.KT.p N. POSITIONS 02 = Nr. 2 Position 04 = Nr. 4 Position 06 = Nr. 6 Position 08 = Nr. 8 Position 10 = Nr. 10 Position 12 = Nr. 12 Position 14 = Nr. 14 Position 16 = Nr. 16 Position 18 = Nr. 18 Position 20 = Nr. 20 Position 22 = Nr. 22 Position 24 = Nr. 24 Position 26 = Nr. 26 Position 28 = Nr. 28 Position 30 = Nr. 30 Position 32 = Nr. 32 Position Solenoid Accessories Tie-rod M3 valves "OPTYMA32-S" Nut 2240.KD.00 Solenoid Accessories Nut valves "OPTYMA32-S" Accessories table for manifolds Set of N positions KD KT KD KT KD KT KD KT KD KT KD KT KD KT KD KT KD KT KD KT KD KT KD KT KD KT KD KT KD KT KD KT.32 Solenoid Accessories valves table "OPTYMA32-S" for manifolds 6
8 Solenoid valves "OPTYMA32-S" Accessories Diaphragm plug Serie 2200 Polyethylene Silencer Series SPL-R SPLR.f f DIAMETRO TUBO 6 = 6 mm 10 = 10 mm Weight gr. 6,5 Accessories Serie Solenoid Diaphragm Polyethylene 2200-S-GB_Tappo+Cavi valves plug Silencer "OPTYMA32-S" Series SPL-R - Accessories Cable complete with connector, 25 Poles IP l.p CABLE LENGTH 03 = 3 meters l 05 = 5 meters 10 = 10 meters p CONNECTORS 10 = In line 90 = 90 Angle Solenoid Accessories Cable complete valves with "OPTYMA32-S" connector, 25 Poles IP65 Cable complete with connector, 37 Poles IP l.p CABLE LENGTH 03 = 3 meters l 05 = 5 meters 10 = 10 meters p CONNECTORS 10 = In line 90 = 90 Angle Solenoid Accessories Cable complete valves with "OPTYMA32-S" connector, 37 Poles IP65 Cable complete with connector, 25 Poles IP65 l l.25 CABLE LENGTH 03 = 3 meters 05 = 5 meters 10 = 10 meters Solenoid Accessories Cable complete valves with "OPTYMA32-S" connector, 25 Poles IP65 7
9 Series 2200 Solenoid valves "OPTYMA32-S" Accessories - 8 Input / Output Module 1 Each connection can accept either two wire (switches, magnetic switches, pressure switches, etc.) or three wire connections (photocells, electronic end of stroke sensors, etc.) If +24VDC is required on at Pin 1 of each connector, it is possible to provide this via the through-line pin of the multi-pole connector. I.E : Pin 25 of the 25 pin multi-pole connector (code P or P) Pin of the 37 pin multi-pole connector (code P or P) 8
10 Solenoid valves "OPTYMA32-S" Accessories - 8 Input / Output Module Series
11 Series 2200 Solenoid valves "OPTYMA32-S" Accessories - 8 Input / Output Module 1 Attention: No more additions are possible 10
12 1 Solenoid valves "OPTYMA32-S" Series
13 Series 2200 Slenoid valves "OPTYMA32-S" 12 77
14 Solenoid valves "OPTYMA32-S Series
15 Series 2200 Slenoid valves "OPTYMA32-S" 14
16 Solenoid valves "OPTYMA32-S Series
17 Series 2200 Slenoid valves "OPTYMA32-S" 16
18 Solenoid valves "OPTYMA32-S Series
19 Series 2200 Slenoid valves "OPTYMA32-S" 18
20 Solenoid valves "OPTYMA32-S Series
21 Series 2200 Slave CANopen Solenoid valves "OPTYMA32-S" Serial system 1 20
22 Solenoid valves "OPTYMA32-S" Solenoid valves "OPTYMA32-S" Serial system Serial system Series 2200 Slave CANopen 1 21
23 Series 2200 Slave DeviceNet Solenoid valves "OPTYMA32-S" Serial system 1 22
24 Solenoid valves "OPTYMA32-S" Serial system Series 2200 Slave DeviceNet 1 23
25 Series 2200 Slave PROFIBUS Solenoid valves "OPTYMA32-S" Serial system 1 24
26 Solenoid valves "OPTYMA32-S" Serial system Series 2200 Slave PROFIBUS 1 25
27 Series 2200 Slave EtherCAT Solenoid valves "OPTYMA32-S" Serial system 1 26
28 Solenoid valves "OPTYMA32-S" Serial system Series 2200 Slave EtherCAT 1 27
29 Series 2200 Module 8 Inputs Solenoid valves "OPTYMA32-S" Accessories - Serial system 1.28
30 1 Solenoid valves "OPTYMA32-S" Accessories - Serial system Serie 2200 Connectors 29
31 Series 2200 Connectors Solenoid valves "OPTYMA32-S" Accessories - Serial system 1 30
32 1 Solenoid valves "OPTYMA32-S" Accessories - Serial system Serie 2200 Connectors 31
33 Series 2200 Connectors Solenoid valves "OPTYMA32-S" Accessories - Serial system 1 32
34
Solenoid valves "OPTYMA32-S" General. Series 2200
1 Solenoid valves "OPTYMA32-S" General Series 2200 1 Series 2200 Solenoid valves "OPTYMA32-S" Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP Weight gr. 67 SHORT FUNCTION CODE "A" Operational
Solenoid valves "OPTYMA32-S" General. Series 2200
1 General Series 2200 1 Series 2200 Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP 12 = 24 VDC NPN Weight gr. 67 SHORT FUNCTION CODE "A" Serie Solenoid 2200-S-GB valves - Spring "OPTYMA32-S"
Solenoid valves "ENOVA" Series 2300
Solenoid valves "ENOVA" Series 300.04 Series 300 Solenoid valves "ENOVA".05 Solenoid valves "ENOVA" Series 300 Solenoid - Differential (Monostable) 5/ 3eC.5.00.36.v ELECTRICAL CONTACTS 0=STANDARD-only
Series 400. Specifications may be subject to change without prior notice 2.36
Series 400.36 Series 468 Solenoid valves 3/ - 5/ Solenoid - Spring 3/ 468.t.0.1.M 5/ Solenoid - Spring Weight gr. 40 Weight gr. 40 Serie Solenoid 468_GB_01 valves - Spring 3/ - 5/ - 540 Nl/min mm 6 G 1/8"
PSP PSP PSC PSR TECHNICAL CHARACTERISTICS. ComboBox series. Valves. Flow rates according to fittings:
ComboBox series The new ComboBox valves are the result of long reflections regarding the requirements of the modern user, the current market demands, the ever increasing needs in the ergonomical and ecological
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
A K 3 E D G
005 Series. How to Order - G3 or Multipol Assembly Kit A K 3 E D 0 0 0 0 3 G A36 Electronic / Electrical Systems Type & Location 3 = T = Terminal Strip - 3 J = 5 pin SUB-D connector M = 37 pin SUB-D connector
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
MACH 16 VALVES DISTRIBUTORS
MACH 16 VALVES Available in size 1/8 only, versions 5/2 and 5/3 and with pneumatic and solenoid actuation. The mach 16 valve is a typical small size valve, only 16 mm wide, with excellent performance 750
B1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
Series 77 & 78. Compact & Modular Valves. solutions. Series 77 - Compact Valves. Series 77 - Sub-D. Series 77 - Fieldbus
PNEUMATIC valves Series 77 & 78 Compact & Modular Valves Series 77 - Compact Valves Series 77 - LPP770 Series 77 - Sub-D Series 77 - Fieldbus Series 77 - LPP772 Series 77 - Coils & Plug-in sockets Series
VALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
zamak nitrile rubber self-extinguishing technopolymes aluminum
0 mm - G /8 Valves and solenoid valves - G/8 threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
Series 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).
> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the
DISTRIBUTORS. n o p q. hdm + multi-pole connection TECHNICAL DATA COMPONENTS
+ multi-pole connection HDMs are the ideal solution for those requiring the unbeatable performance, flexibility and modularity of Multimach valves combined with sturdy mechanics and a high degree of protection
Individual, Multipole and Fieldbus
Valve Islands > 016 > Series Y valve islands Series Y valve islands, Individual, Multipole and Fieldbus Valve Island with integrated Pneumatics and Electronics. Available versions: Individual, Multipole,
5/2-5/3 VALVES (1/8" + SUBBASE) Series G
/-/ VLVES (/" SUBBSE) Series G G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact
Valve Islands Series F
CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed
Valves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
Multipole and Fieldbus
CATALOGUE > Release 8.8 > Series HN valve islands Series HN valve islands, Multipole and Fieldbus New versions Multipole connection with 5 or 37 pins Serial connection with the most common communication
EB 80 SUMMARY EB 80 DISTRIBUTORS P EB 80 ELECTRO-PNEUMATIC SYSTEM PAGE 4 P EB 80 BASIC PAGE 13 P EB 80 - SIGNAL MODULES - S PAGE 16
EB 80 SUMMARY EB 80 P EB 80 ELECTRO-PNEUMATIC SYSTEM PAGE 4 P EB 80 BASIC PAGE 13 P EB 80 - SIGNAL MODULES - S PAGE 16 P EB 80 - ELECTRICAL CONNECTION - E PAGE 22 P EB 80 - MULTI-POLE ELECTRICAL CONNECTION
Valve Islands Series H
CATALOGUE > Release 8. Valve Islands Series H Valve Island with Pneumatics and Electronics integrated. Available versions: Multipole (PNP and NPN) and Fieldbus (Profibus-DP, DeviceNet, CANopen). Valve
14,5 PSC PSP PSR. INTEGRATED SUB-BASE MANIFOLD valve with no subbase
PS COMBOBOX Valves PSC Single electric connection INTEGRATED SUB-BASE MANIFOLD valve with no subbase REDUCED DIMENSIONS Space saving up to 0% in comparison with standard valve MANIFOLDS HIGH FLOW RATE
CONTROL. 2 > Control. Solenoid valves Pneumatic valves. Mechanical and manual valves. Flow control valves. Directly operated solenoid valves
> Control Solenoid valves Pneumatic valves / 7 Valves and solenoid valves Series E Mechanical and manual valves / 34 Mechanically operated minivalves Series Flow control valves Includes News / 43 Flow
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
Pneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.
> Series 4 valves and solenoid valves Series 4 valves and solenoid valves New models 3/, 5/ and 5/3-way CC, CO Ports: G1/8, G1/4, G1/ Series 4 solenoid valves have been designed in the 3/, 5/, 5/3 versions
Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
SOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
2005 / 2012 / 2035 Series
005 / 0 / 035 Series Accessories Sandwich Pressure Regulators Accessory Description 0. to bar - 005 Regulator repair kit 0.3 to bar - 0.7 to 9 bar -3 0. to bar 39-909 0 Regulator repair kit 0.3 to bar
FIELDBUS ELECTRONICS 580 Electronics (Series : M7 to 1/2 (G or NPT) or with push-in fittings Ø4 to 10 mm)
FIELDBUS ELECTRONICS 580 Electronics (Series - : M7 to 1/2 (G or NPT) or with push-in fittings Ø4 to 10 mm) 580 Fieldbus - Electronics Made Easy! Innovative Graphic Display is used for easy commissioning,
VENTTIILIT MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME. TECHNICAL DATA Valve fitting port Fluid Type Versions Operators: 0.
venttiilit MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Valve fitting port Fluid Type Versions Operators: Operating pressure C / Flow rate at 6 Bar P 0.5 Bar Flow rate at 6 Bar P 1 Bar N Installation
MULTIPLE CONNECTORS MACH 16
Mach 16 valves can be mounted on bases with pneumatic or electrical connection. The electric contacts of the individual valves are connected by means of a printed circuit board in a sealed conduit to a
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
PS1 Modular Interface Valve
PS1 Modular Interface Valve May 2010 Important! Before carrying out any service work, ensure that the valve and manifold have been vented. Remove the primary supply air hose to ensure total dis of the
Lockable isolation 3/2-way valves Series MX 3/
CATALOGUE > Release 8.5 > /2-way isolation valves Series MX Lockable isolation /2-way valves Series MX New MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Manual, electro-pneumatic, servo-pilot and
Fieldbus System Variations
Fieldbus System Variations IP67/65 specification models I/O separated type Valve outputs only Inputs only Gateway-type valve outputs only inputs only I/O integrated type Valve outputs with multiple I/O
PNEUMATIC VALVE MANIFOLDS 11 mm - Series 501 M7 or with push-in fittings Ø6 mm
PNEUMATIC VALVE MANIFOLDS mm - Series 50 M7 or with push-in fittings Ø6 mm Series G3 50 Types MULTIPOL-BUS new 50 D/3D CAD models - In 3D 0056GB-0/R0 6 Manifold assemblies kit (Electronic + End plate)
Servo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
503 series. GENERAL Operating pressure
FEATURES rate up to 00 l/min Spool & Sleeve or rubber packed technology in the same dimension body Wide electrical connection selection : G3 or 580 Fieldbus Electronics, 25 or 37 Pin Sub-D connector, 19
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
Pneumatic Pilot - Operated Valves Series 3 and 4
Pneumatic Pilot - Operated Valves Series 3 and 4 Series 3: 1/8 NPTF, 3/2-way and 5/2-way Series 4: 1/8, 1/4 NPTF 3/2, 5/2 and 5/3-way The pneumatically operated, 3/2-way, 5/2-way and 5/3-way, Series 3
System 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
VALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
Compact design suitable for use in reduced mounting space. CONTROL > Directly operated solenoid valves Series PN GENERAL DATA
> Directly operated solenoid valves Series PN Directly operated solenoid valves Series PN 3/-way Normally Closed (NC). The solenoid valves can be mounted on a single base (with M5 ports) as well as on
Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses
Remote Process Actuation Control System AirLINE WAGO Remote I/Os and Fieldbusses Type 8644 can be combined with... Fully compatible with WAGO I/O Combination of Fieldbus, pilot valves and I/O modules High
VALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
System 6. Solenoid Coils Armature Assemblies Valve Systems
Solenoid Coils Armature Assemblies Valve Systems a Kft. i r á g n u H t e n nass mag Precision Controls Kft. since 0 Nass Controls LP Nass Magnet GmbH Introduction.........................................
Series ITV0000. Compact Electro-Pneumatic Regulator ITV N Q. IITV00 02 n. How to Order. For single unit and single unit for manifold
Compact Electro-Pneumatic Regulator Series ITV How to Order For single unit and single unit for manifold ITV N Q Pressure range. MPa MPa.9 MPa Power supply voltage 4 VDC ±% to VDC Cable connector N S L
Electro-Pneumatic Devices Valves and Positioners. The Drive & Control Company
Electro-Pneumatic Devices Valves and Positioners The Drive & Control Company Electro-Pneumatic Devices Dynamic precision from Rexroth Why choose Rexroth E/P s? Rexroth electro-pneumatic pressure control
For mounting on subbase or footprint in accordance with CNOMO recommendation E 06620N Part numbers (and voltages) Voltage max. power consumption U nom
Intrinsically Safe Miniature Solenoid Valves Order/Technical Support Tel: (800) 6775 / FAX: (800) 677865 / www.crouzetusa.com 5/6 5 For mounting on subbase or footprint in accordance with CNOMO recommendation
Intrinsically Safe Miniature Solenoid Valves
Intrinsically Safe Miniature Solenoid Valves 5 Order/Technical Support Tel: (800) 6775 / FAX: (800) 677865 / www.crouzetusa.com 5/6 Intrinsically safe miniature solenoid valves EEx ia T6 approval no. 9
Electro-pneumatic control valves
Electropneumatic control valves Visit our website for further information www.crouzet.com 9 Electropneumatic miniature solenoid Miniature solenoid valves Terminals Wires Connector LED indicators Valve
MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
Pneumatic. PVD Everdure Ceramic Valves
PVD Ceramic Valves Ceramic slide plate; extremely long life Built in manual override Transfer modules to combine all sizes Selectable air pilot control Clip-on DIN rail Specification Material Polyamide
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves 8mm valve Series 33 Function Port size Flow (Max) Individual mounting Series 3/ NC M3 0.08 C v Inline OPERATIONAL BENEFITS 1. 8mm valve direct solenoid
42 Series MAConnect TM. 42 Series Plug-In Manifold
42 Series MAConnect TM 42 Series Plug-In Manifold Specifications 42 Series Valve Operating Data Fluids: Lubrication: Safe Operating Temperature Range: Pressure Range: Electrical: Air or Inert Gas Not Required.
Electro-Pneumatic Regulator Electronic Vacuum Regulator
Electro-Pneumatic Regulator Electronic Vacuum Regulator New Stepless control of air pressure proportional to an electrical signal Added Fieldbus compliant specifications to Series ITV//! Reduced wiring
Electro-Pneumatic Regulators. Electronic Vacuum Regulators
Electro-Pneumatic Regulator Electronic Vacuum Regulator New Reduced wiring Applicable Fieldbus protocols Compact & light Weight: g Note ) (ITV) Power consumption: 4 W Note ) or less Electro-Pneumatic Regulators
Electro-Pneumatic Regulators. Electronic Vacuum Regulators
Electro-Pneumatic Regulator Electronic Vacuum Regulator Stepless control of air pressure proportional to an electrical signal Added Fieldbus compliant specifications to New Series Reduced wiring Series
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Electro-Pneumatic Regulators. Electronic Vacuum Regulators
Electro-Pneumatic Regulator Electronic Vacuum Regulator New Reduced wiring Applicable Fieldbus protocols Compact & light Weight: g Note ) (ITV) Power consumption: 4 W Note ) or less Electro-Pneumatic Regulators
TECHNICAL CHARACTERISTICS
Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation
Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239
Valves Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service
Micro-venturis, series GVA
Micro-venturis, series GVA Reference V : vacuum outlet Coupling M F, 6 mm deep or Quick-connect coupling, tube 4 mm dia. or Male coupling, 4 mm dia.,. mm long ø. 4... Version GVA -- 44 GVASIL or GVASPO
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Series ITV1000/2000/3000
Electro-Pneumatic Regulator Series ITV// How to Order [Option] RoHS ITV S Model type type type Pressure range 5 MPa MPa.9 MPa CE compliant Nil Q CE compliant Note) Refer to pages, 5, and 6 for information
Modular pneumatic valve unit
Modular pneumatic valve unit Compact design Modular configuration High flexibility Type 8640 can be combined with Simple exchange of valves (with option P-shut-off - also possible during operation) Type
Motor protection switches M16 20A Main switches S25 25A
Motor protection switches M16 20A Main switches S25 25A DISA Elektro AG Kägiswilerstrasse 33 CH-6060 Sarnen Tel. 041 666 70 50 Fax 041 666 70 49 info@disa.ch www.disa.ch DISA your partner for individual
Modular electrical and pneumatic automation system
Modular electrical and pneumatic automation system Decentralised automatisation without control cabinet in protection type IP65 / IP67 Modular structure, also as central station with several decentralised
Electrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
Reduced-wiring Fieldbus System (Serial Transmission)
Best Pneumatics 1 Fieldbus System Variations P.2040 Applicable Valve Series P.2042 SV P.2042 SZ P.2042 SY NEW P.2043 SY P.2044 SYJ P.2045 SJ P.2045 VQC P.2046 SQ P.2046 VQ P.2047 VQZ P.2047 P.2048 Reduced-wiring
Instant control for all pneumatic actuators A unique, global, universal and compact solenoid valve system
Catalogue Manual Instant control for all pneumatic actuators A unique, global, universal and compact solenoid valve system Catalogue : PD0C00013GB04ev Modular valve islands or stand-alone valves The machine
Features General Information ompact, easy to install, reliable, serial bus compatible... Easy to meet system design needs Full flow capacity allows di
Features...3 Valves with Operators... 4-5 Head & Tail Sets and Intermediate Air Supply Modules...6 Head & Tail Sets with Serial Bus ommunications...7 How To Order...8 Replacement Kits...9 Interface 2000
Modular pneumatic valve unit
Modular pneumatic valve unit Compact design Modular configuration High flexibility Simple exchange of valves (with option P-shut-off - also possible during operation) Type 8640 can be combined with Type
Diaphragm : Plastic Metal Globe : Plastic Metal Manifold Pinch Valve
Diaphragm : Plastic...................... 156 Metal...................... 158 Globe : Plastic...................... 160 Metal...................... 164 Manifold..................... 170 Pinch Valve.......................
Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves
Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning
3 Porting options. for an optimized flow. 15 mm DIN For C Pilot Solenoid Valve. Stackable Valve Series - PVL-B22. PVL-B22 - Stackable Series
Stackable Valve Series - PVL-B22 PVL-B22 - Stackable Series Stacking high flow valves with 10 or 15mm DIN C Pilot Solenoid Valve. Light weight plastic bodies feature push-in or threaded connection. Stacking
Pneumatic. PVD Ceramic Valves
Pneumatic PVD Ceramic Valves Ceramic slide plate; extremely long life Built in manual override Transfer modules to combine all sizes Selectable air pilot control Clip-on DIN rail Specification Material
Gateway Type Serial Transmission System
P99-EX-B Gateway Type Serial Transmission System P Maximum 8 point control (64 inputs/64 outputs) P Flexibility of manifold valve installation improved with 4 branch wiring Flexible installation and removal
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
Valve Manifolds Series
Valve Manifolds 00 Series General Information Valve 00 series belongs to the new Numatics Valve Generation 000. It fulfills all requirements of automation. Characteristics: - Modular reality, true plug
Directional control - SRK series Solenoid valve
Directional control - series valve valve - 500, 700 Provide CD external dimension. SM SM SMU SMU Small size, big flow rate! high speed, react quickly ; ( Under 10 ms ) with indicator light and voltage
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx