SOLENOID VALVES AND PNEUMATIC VALVES

Transcription

1 9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and The Series 9 electropneumatically or pneumatically operated valves have been manufactured in the sizes 1, and 3, as recommended by the ISO Standards. Three different types of sub-base are available: - single sub-base with side ports - single sub-base with rear ports - manifold sub-base with common exhausts complete with end blocks. The Series 9 solenoid valves are also constructed so as to be actuated in different ways : - electrical actuation spring return - electrical actuation and pneumatic spring return - electrical actuation and return - pneumatic actuation and spring return - pneumatic actuation and return - pneumatic actuation and differential pneumatic return. GENERAL DATA Construction Valve group Materials Mounting Size Installation Operating temperature Lubricant spool - type (servocontrolled) 5/ and 5/3 way / pos. aluminium body, stainless steel spool, NBR seals threaded holes in sub-base 1, and 3 in any position 0 60 C (using dry air at -0 C) oil compatible with NBR (3-10 E)

2 S E R I E S 9 PNEUMATIC DATA Operating pressure Nominal pressure max. press. 10 bar (for minimum pressures see descriptions) 6 bar Nominal flow * Qn Size 1 = 900 Nl/min; * Qn = determined with supply pressure of 6 bar and with p = 1 bar. ELECTRICAL DATA Fluid Voltage Power consumption Class of insulation Duty cylce filtered air AC: see coding DC: see coding Size = 1610 Nl/min; Size 3 = 3700 Nl/min AC at inrush for A70 = 8.5 VA (for A80 = 7.5 VA) during operation for A70 = 6.5 VA (for A80 = 5 VA) DC for A70 = 5 W (for A80 = 4 W) Class H 100%, continuous operation Voltage tolerance AC + 10% -15%, DC ± 10% Protection class IP54 DIN (IP65 with DIN 43650/PG9 connector) Connector mod , mod CODING OF SERIES 9 SOLENID VALVES WITH SUB-BASE SERIES 9 NO OF WAYS/POSITIONS 5 = 5/ 6 = 5/3 Close centres 7 = 5/3 Open centres SUB-BASE C = ISO (manifold outlets) F = ISO (single sub-base, side ports) G = ISO (single sub-base, rear ports) N = ISO (front outlet interface) N1A = front outlet sub-base N OF SUB-BASE A = 1 *F = 6 *B = *G = 7 *C = 3 *H = 8 *D = 4 *K = 9 *E = 5 *L = 10 *M= 11 *N = 1 *P = 13 *R = 14 *S = 15 SIZE 1 = Size 1 = Size 3 = Size 3 PORTS (OUTLETS) 1 = G1/4 = G3/8 3= G1/ 951-C1B-P16-3-A77-S ACTUATION 33 = pneumatic, pneumatic return 34 = pneumatic, differential pneumatic return 35 = pneumatic, mechanical spring return P11 = double solenoid (horizontal solenoids) P15 = single solenoid, spring return (horizontal solenoids) P16 = solenoid, pneumatic spring return(horizontal solenoids) SPECIAL S = Special to be specified ** SOLENOID VOLTAGE A70 G70 A80 G90 H = 4V 50/60Hz K = 110V 50/60Hz J = 0V 50/60Hz = 4V RC ** For other tensions please contact our technical dept. SOLENOID MATERIAL A = PPS G = Nylon SOLENOID 7 = x 8 = 30 x 30 SOLENOID INTERFACE 3 = A531 - BC * Complete with two end-blocks 900-H or 900-HN. 00

3 9 S E R I E S 5/ - way solenoid valves, ISO 1, ISO, ISO 3, monostable The Series 9 solenoid valves with an ISO interface, size 1, and 3, which have electropneumatic actuation and spring return, are suitable for mounting on a sub-base. For electrical actuation, types of solenoid, A70 and A80, are available with a wide range of voltages and power consumptions. The minimum operating pressure is.5 bar. Connector or Note: Packaging with ISO solenoid valves includes interface seals and fixing screws P15-3-A00* P15-3-A00* P15-3-A00* P16-3-A00* P16-3-A00* P16-3-A00* * choose solenoid required. Size B L1 L L3 H H1 H ISO / - way, 5/3 - way valves, ISO 1, ISO, ISO 3, bistable The Series 9 solenoid valves which have an ISO interface, size 1, and 3, and which have electropneumatic actuation and return are suitable for mounting on a base-piece. For electrical actuation, types of solenoid, A70 and A80, are available with a wide range of voltages and power consumptions. The minimum operating pressure is bar. Connector or Note: Packaging with ISO solenoid valves includes interface seals and fixing screws P11-3-A00* P11-3-A00* P11-3-A00* P11-3-A00* P11-3-A00* P11-3-A00* P11-3-A00* P11-3-A00* P11-3-A00* * choose solenoid required. Size B L1 L L3 H H1 H ISO

4 S E R I E S 9 5/ - way valves, ISO 1, ISO, ISO 3, monostable, bistable The Series 9 valves with ISO interface, size 1, and 3, are available with the following types of actuation: - pneumatic, with spring return (min. press..5 bar) - pneumatic actuation and differential return (min. press. bar) - pneumatic actuation and return (min. press. bar). Note: Packaging with ISO solenoid valves includes interface seals and fixing screws Size ISO B L H /3 - way valve, ISO 1, ISO, ISO 3, monostable, with stable central position The Series 9 valves with ISO interface, size l, and 3, are available with pneumatic actuation and central resetting by a spring. There are two types of function: - with closed centres - with open centres. The minimum operating pressure is.5 bar. Note: Packaging with ISO solenoid valves includes interface seals and fixing screws Size ISO B L H Manifold assembly 004

5 9 S E R I E S Single sub - base side outlets (VDMA 4345) 901-F1A 90-FA 903-F3A Size A B C D E F G H H1 H L L1 O R1 R S G1/8 G1/ G1/8 G3/ G1/8 G1/ 136. Single sub - base with rear outlets (VDMA 4345) 901-G1A 90-GA 903-G3A Interface DIN ISO 5599/1 Interface DIN ISO 5599/1 Size ISO A B C D E H H1 H L L1 M N O P R R1 R S T M5 G1/8 G1/ M6 G1/8 G3/ M8 G1/8 G1/

6 S E R I E S 9 Manifold sub - base with common exhausts and inlet (VDMA 4345) 901-C1A 90-CA 903-C3A End block for manifold sub - base (VDMA 4345) Size B C H H1 L L1 O P1 P P3 P4 R1 R R3 S V V1 V G1/8 G1/4 M G1/8 G3/8 M G1/8 G1/ M H1 (coppia) 90-H (coppia) 903-H3 (coppia) Interface DIN ISO 5599/1 Size A A1 H H1 H H3 H4 L O O1 P P1 R ør1 ør S T V G3/ G1/ G

7 9 S E R I E S End block with front outlets (VDMA 4345) 901-N1 90-N 903-N3 Size A B D H H1 H H3 L O P P1 P P3 P4 R T G1/ G3/ G1/ 1.4. Assembly of manifold sub - base (VDMA 4345) Taglia A B C D E OR UNI 5739 UNI 5588 H L O F G G1 1 n D+C n D+C M5x0 M n D+C n D+C M6x5 M n D+C n D+C M8x5 M

8 S E R I E S 9 Manifold bases with common inlet and exhaust ports and with outlet ports on the front Size A B C D E F G H L M N P R S T 901-N1A M5 G1/4 6. End blocks for manifold bases with front outlets Size A B C D E F G H L M N P P1 R S T U Z 901-HN1 (1 pair) /8" 96 G1/ Part 1 Part

9 9 S E R I E S 901-TP Complete with seals and screws. Assembly example 901-C1A/TP 90-CA/TP 901-N1A/T P-R-S plugged. Mounting example for manifold sub - base Note: For correct asembly of the manifold interface seal, follow the instructions of the drawing below. Assembly for front outlet manifold sub - bases Size A B C D E F G H L M N UNI 5931 UNI 5588 S P R 1 N D+E n D+S G1/4 G1/8 M5 x 14 M N1A/TP P plugged. 009