10 mm solenoid valves on manifold with multiconnection D-SUB
|
|
- Leona Silvia Clarke
- 5 years ago
- Views:
Transcription
1 0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical protection IP40 Connector D-SUB (DB-25) with 25 pins Manifold and structure in aluminum model no. stations A
2 0 mm solenoid valves on manifold with multiconnection D-SUB Solenoid Valve 0 mm Attention: maximum torque for mounting screws of the solenoid valves: 0.25 Nm ACCESSORIES Connector for 0 mm solenoid with cable red/black, length 400 mm valves numbering Connector D-SUB (DB-25) Tension 24V DC ±0% Power W Nominal flow rate at 6 bar, Dp bar 5 Nl/min -24 signals for solenoid valves 25 common ( ) Temperature range Working pressure Fluid -5 C C bar MPa 5µ filtered, lubricated or non lubricated air
3 0 mm solenoid valves on manifold with multiconnection D-SUB mounting bracket 20 ORDER CODE ø4.5 It can be used to mount the base on a plate. The order code is referred to a couple of brackets, which are sold in kit with the assembling screws. 0 ø9 5 2
4 compact 5/2 spool valves with G/8 threaded ports Solenoid pilots with manual override Tension 24V DC Electrical protection IP 40 Power W Maximum 2 bi-stable valves or 24 mono-stable Air supply and exit ports: G/8 ; exhaust ports: M5 Materials Body: aluminium S Springs: stainless steel Seals: NBR Spool: nickel plated aluminium Internal parts: brass OT58 Nominal orifice 4 mm Nominal flow rate at 6 bar, Dp bar 350 Nl/min Temperature range Working pressure monost. internal air supply Actuating pressure (for separate air supply) bar MPa bi-stable internal air supply bar MPa mono-stable bar MPa C separate air supply bar MPa bi-stable bar MPa Fluid 5µ filtered, lubricated or non lubricated air
5 compact key to codes Product Family 07 Type of modularity Y modular multiple sub-bases Size 3 G/8 6 mm Specification of each position CASE SENSITIVE G/8 a 45P ME b 45P ME AS c 45P EE e 45P EE AS q 45P CE r Blanking Plate s Intermediate header t Diaphragm on air supply u v Diaphragm on exhausts Diaphragm on air supply and exhausts] Valves, electronic parts and sub-bases with accessories are included and preassembled in the multiconnection manifold ordered according to these codes. It is not necessary to order them separately. 23
6 compact 45P ME 5/2 /8 solenoid pilot - spring return M5 G/ manual override ø LED indicator ø P EE 5/2 /8 double solenoid pilot M5 G/8 manual override ø3. LED indicator ø
7 compact 45P CE 5/2 /8 solenoid pilot - separate pneumatically piloted return These valves cannot be installed in-line stand alone, but only on sub-base. 45P ME AS 5/2 /8 solenoid pilot with separate air supply - spring return 68 manual override ø LED indicator 45P EE AS 5/2 /8 double solenoid pilot with separate air supply This valve cannot be installed in-line stand alone, but only on sub-base. manual override ø3. LED indicator
8 compact plug-in multiconnection ( number of positions - 2) number of positions 62 26
9 compact valves installation multiple sub-bases mounting screws for the electronic plate
10 compact manifold mounting on omega-profile multiple sub-bases G/8 G/4 K Q ( number of positions 2) mounting nuts for omega-profile 28
11 compact connector D-SUB (DB-25) signal for solenoid valves common ( ) internal diaphragm to divide air supply and exhaust D-SUB connector (DB-25) separate air supply for solenoid writable label protection cover for unused contact internal diaphragm C This diaphragm must be inserted between two elements of the manifold to interrupt the air flow and divide the manifold into two or more parts. It can be used to interrupt only the supply air flow, only the exhausts or both air supply and exhausts. It can be ordered as spare part, and in this case it must be manually inserted after having partly disassembled the manifold, or it can be ordered together with the valve manifold, indicating it in the order code as specified in the codes explanation of the multiconnection. ORDER CODE for /8 manifolds øb /8 A 0 B 6.6 C 3.2 øa 29
12 compact sub-base 66 Each sub-base is sold with all necessary components to install the valves. Each sub-base has two positions. To install only one valve, it is necessary to close the other position with a blanking plate. ORDER CODE for /8 valves intermediate header An intermediate header with separate air supply is available to be installed in a manifold system which requires mixed operating pressures. G/8 ORDER CODE for /8 manifolds 66 5 blanking plate 6 The blanking plate with screws is available to close manifold stations not in use. ORDER CODE for /8 sub-bases
13 compact Right Inlet Header Each manifold assembly requires a right and a left hand inlet header kit. The header includes one position for the installation of one valve. Each inlet header is sold with all necessary components. ORDER CODE right hand header for /8 manifolds left inlet header Each manifold assembly requires a right and a left hand inlet header kit. The header includes one position for the installation of one valve. Each inlet header is sold with all necessary components. ORDER CODE left hand header for /8 manifolds
14 compact electronic plate (rack) A model n. stations A The electronic plate is normally sold together with the already configured multiconnection, but it can be sold also separately. The cables are already assembled inside the plate. ACCESSORIES metres cable with connector D-SUB metres cable with connector D-SUB metres cable with connector D-SUB 25 2
15 3/2-5/2-5/3 spool valves with G/8 -G/4 threaded ports Solenoid pilots with manual override Tension 24V DC Electrical protection IP 40 Power W Maximum 2 bi-stable valves or 24 mono-stable (on fixed manifold in any case maximum 2 valves) Materials Body: aluminium S End caps: Springs: stainless steelm Springs: INOX Seals: NBR Spool: nickel plated aluminium Internal parts: brass OT58 (*) The parts in technopolymer are marked with the logo /8 /4 Nominal orifice Temperature range /8 : 5 mm /4 : 7.5 mm C Working pressure Actuating pressure (for separate air supply) monost. internal air supply bar MPa bi-stable internal air supply bar MPa mono-stable bar MPa separate air supply bar MPa bi-stable bar MPa Fluid 5µ filtered, lubricated or non lubricated air 3
16 N + K number of positions M5 30 L D E F G M A B C J + K number of positions H A B C D E F G H J K L M N G/ G/4 30 G/ G3/
17 key to codes Product Family 07 plug-in multiconnection Type of modularity X fixed manifold Y modular multiple sub-bases Specification of each position CASE SENSITIVE G/8 G/4 Size 0 G/8 mm G/4 25 mm 2 mixed G/8 +G/4 a b c d e f g h j k m n p q r s t 52P ME 52P ME AS 52P EE 52P EED 52P EE AS 2x32P ME 2x32P ME AS 52P3C EE 52P3A EE 52P3P EE 52P3C EE AS 52P3A EE AS 52P3P EE AS 52P CE Blanking plate Intermediate header Diaphragm on air supply A B C E H J K M N P R S T 5P ME 5P ME AS 5P EE 5P EE AS 5P3C EE 5P3A EE 5P3P EE 5P3C EE AS 5P3A EE AS 5P3P EE AS Blanking plate Intermediate header Diaphragm on air supply u Diaphragm on exhausts U Diaphragm on exhausts v Diaphragm on-air supply & exhausts V Diaphragm on air supply and exhausts Valves, electronic parts and sub-bases with accessories are included and preassembled in the multiconnection manifold ordered according to these codes. It is not necessary to order them separately. 5
18 52P ME 5/2 /8 solenoid pilot - spring return 5P ME 5/2 /4 solenoid pilot - spring return A B C D E F G H G/ G/
19 52P ME AS 5/2 /8 solenoid pilot with separate air supply - spring return 5P ME AS 5/2 /4 solenoid pilot with separate air supply - spring return 52P CE 5/2 /8 solenoid pilot - separate pneumatically piloted return These valves cannot be installed in-line stand alone, but only on sub-base. A B C D E F G/ G/
20 52P EE 5/2 /8 double solenoid pilot 5P EE 5/2 /4 double solenoid pilot 52P EED 5/2 /8 double solenoid pilot - with differential 2x32P ME double 3/2 /8 solenoid pilot - spring return A B C D E F G H G/ G/
21 52P EE AS 5/2 /8 double solenoid pilot with separate air supply 5P EE AS 5/2 /4 double solenoid pilot with separate air supply 2x32P ME AS double 3/2 /8 solenoid pilot with separate air supply - spring return These valves cannot be installed in-line stand alone, but only on sub-base. A B C D E F G/ G/
22 52P3C EE 52P3A EE 52P3P EE 5/3 /8 double solenoid pilot closed centres open centres pressurized centres 5P3C EE 5P3A EE 5P3P EE 5/3 /4 double solenoid pilot closed centres open centres pressurized centres A B C D E F G H G/ G/
23 52P3C EE AS 52P3A EE AS 52P3P EE AS closed centres open centres pressurized centres 5/3 /8 double solenoid pilot with separate air supply 5P3C EE AS 5P3A EE AS 5P3P EE AS closed centres open centres pressurized centres 5/3 /4 double solenoid pilot with separate air supply These valves cannot be installed in-line stand alone, but only on sub-base. A B C D E F G/ G/
24 valves installation multiple sub-bases G/4 -G/8 reduction M5 separate air supply for solenoid mounting screw s for the electronic plate G/8 G/4 G/8 The external overall dimensions of a hybrid multiconnection are the same of a /4 multiconnection. In a hybrid multiconnection, only /4 valves can have separate air supply for the solenoid. G/4 232
25 valves installation fixed manifolds The installation of valves with separate air supply is not possible on fixed manifolds. mounting screws for the electronic plate. 233
26 manifold mounting from the top side multiple sub-bases G/8 G/4 P+ K number of positions R K P R 26.5 fixed manifolds G/8 G/4 P+ K number of positions R K.5 26 P 2 0 R
27 manifold mounting on omega-profile multiple sub-bases G/8 G/4 K Q mounting nuts for omega-profile Q + K number of positions 235
28 connector D-SUB (DB-25) signals for solenoid valves common ( ) internal diaphragm to divide air supply and exhaust writable label protection cover for unused contact D-SUB connector (DB-25)
29 sub-base /8 /8 ATEX A /4 95 /4 ATEX 95 A B Each sub-base is sold with all necessary components to install /8 or /4 valves. ORDER CODES for /8 valves for /8 valves ATEX for /4 valves for /4 valves ATEX B 20 intermediate header An intermediate header with separate air supply is available to be installed in a manifold system which requires mixed operating pressures. It can be used also to divide the common exhausts. It is sold with all necessaries components for installation. ORDER CODES for /8 manifolds for /4 manifolds /8 /4 A 9 20 B C 2 24 D.5 26 E G/4 G3/8 F 2 23 blanking plate /8 /4 A D 25 The blanking plate with gasket and screws is available to close manifold stations not in use. ORDER CODES for /8 sub-bases for /4 sub-bases 237
30 G/8 right inlet header 80 G/4 M5 mounting hole for the electronic plate ø4 Each manifold assembly requires a right and a left hand inlet header kit. Each inlet header is sold with all necessary components. 6.5 ORDER CODE right hand header for /8 manifolds M6 mounting hole for omega-profile G/8 left inlet header 80 M5 G/4 ø mounting hole for the electronic plate Each manifold assembly requires a right and a left hand inlet header kit. Each inlet header is sold with all necessary components..5 6 ORDER CODE left hand header for /8 manifolds M6 mounting hole for omega-profile 238
31 G/4 right inlet header M5 mounting hole for the electronic plate G3/8 5 Each manifold assembly requires a right and a left hand inlet header kit. Each inlet header is sold with all necessary components. 25 ORDER CODE right hand header for /4 manifolds M6 mounting hole for omega-profile G/4 left inlet header M5 mounting hole for the electronic plate 5 G3/8 Each manifold assembly requires a right and a left hand inlet header kit. Each inlet header is sold with all necessary components. ORDER CODE left hand header for /4 manifolds M6 mounting hole for omega-profile 239
32 G/4 -G/8 reduction 95 This reduction sub-base is used to assemble /8 valves on a /4 manifold, creating a hybrid manifold. It is sold in kit with all necessary components. ORDER CODE internal diaphragm C This diaphragm must be inserted between two elements of the manifold to interrupt the air flow and divide the manifold into two or more parts. It can be used to interrupt only the supply air flow, only the exhausts or both air supply and exhausts. It can be ordered as spare part, and in this case it must be manually inserted after having partly disassembled the manifold, or it can be ordered together with the valve manifold, indicating it in the order code as specified in the codes explanation of the multiconnection. /8 /4 A 0 2 B C øb øa ORDER CODE for /8 manifolds for /4 manifolds 240
33 The fixed manifolds can be used for the installation of five way valves, /8 or /4. Each manifold is sold with all necessary pieces for installation. Unused stations can be closed with a blanking plate. It is not possible to mix on the same base /8 and /4 valves. The installation of valves with separate air supply is not possible. 6.5 B 6.5 /8 20 model n. stations A B mounting holes for the electronic plate A B ø5.5 G/4 /4 9 C 9 model n. stations A B C mounting holes for the electronic plate A B ø5.5 G3/8 24
34 electronic plate (rack) A /8 /4 model n. stations A model n. stations A ACCESSORIES mt. cable with connector D-SUB mt. cable with connector D-SUB mt. cable with connector D-SUB The electronic plate is normally sold together with the already configured multiconnection, but it can be sold also separately. The cables are already assembled inside the plate
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More information5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
More informationValves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
More informationVALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
More informationB1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
More informationSeries 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).
> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the
More informationzamak nitrile rubber self-extinguishing technopolymes aluminum
0 mm - G /8 Valves and solenoid valves - G/8 threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
More informationPneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.
> Series 4 valves and solenoid valves Series 4 valves and solenoid valves New models 3/, 5/ and 5/3-way CC, CO Ports: G1/8, G1/4, G1/ Series 4 solenoid valves have been designed in the 3/, 5/, 5/3 versions
More informationVALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
More informationvalvole VDMA 18 mm azionamento pneumatico
valvole VDMA 18 mm azionamento pneumatico pneumatically piloted valves - VDMA 18 mm Valvole a spola 5/-5/3 5/-5/3 spool valves A norma VDMA 4563 - taglia 0 (18 mm) Compliant to norm VDMA 4563 - size 0
More informationComplete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
More information2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
More informationSOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
More information5/2-5/3 VALVES (1/8" + SUBBASE) Series G
/-/ VLVES (/" SUBBSE) Series G G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact
More informationManually actuated valves
Manually actuated valves 3/2-5/2-5/3 spool valves with /8 - /4 - /2" NPT threaded ports, BSP version avaiable on request Installation in any position Comprehensive range of actuations Push/pull and lever
More informationElectrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
More informationMACH 16 VALVES DISTRIBUTORS
MACH 16 VALVES Available in size 1/8 only, versions 5/2 and 5/3 and with pneumatic and solenoid actuation. The mach 16 valve is a typical small size valve, only 16 mm wide, with excellent performance 750
More informationVannes à commande pneumatique pneumatically piloted valves
Vannes à commande pneumatique Distributeurs 3/2-5/2-5/3 avec raccordements G1/8 -G1/4 -G3/8 -G1/2 3/2-5/2-5/3 spool valves with G1/8 -G1/4 -G3/8 -G1/2 threaded ports Montage en ligne sur embases multiples
More informationMechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
More informationNugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
More informationSOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
More informationElectrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
More information02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
More informationSOLENOID VALVES PIV.M 15 mm
SOLENOID VALVES PIV.M mm / NC/NO direct control microvalves Possible assembly on single and multiple bases Monostable manual actuation as standard Assembly in any position Operation with filtered lubricated
More informationElectrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
More informationValves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
More informationValve Islands Series F
CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed
More information121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
More informationIndividual, Multipole and Fieldbus
Valve Islands > 016 > Series Y valve islands Series Y valve islands, Individual, Multipole and Fieldbus Valve Island with integrated Pneumatics and Electronics. Available versions: Individual, Multipole,
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
More information15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
More information2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
More informationvalvole 16 mm ad azionamento pneumatico
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
More informationSeries RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
More informationSeries RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
More informationSeries MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
More informationVENTTIILIT MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME. TECHNICAL DATA Valve fitting port Fluid Type Versions Operators: 0.
venttiilit MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Valve fitting port Fluid Type Versions Operators: Operating pressure C / Flow rate at 6 Bar P 0.5 Bar Flow rate at 6 Bar P 1 Bar N Installation
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationCompact design suitable for use in reduced mounting space. CONTROL > Directly operated solenoid valves Series PN GENERAL DATA
> Directly operated solenoid valves Series PN Directly operated solenoid valves Series PN 3/-way Normally Closed (NC). The solenoid valves can be mounted on a single base (with M5 ports) as well as on
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
More informationCommon wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More informationElectrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More informationVALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationElectrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
More informationElectrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
More informationVALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
More information3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
More informationVALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators and
More informationValve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
More informationTECHNICAL CHARACTERISTICS
Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation
More informationvalvole ad azionamento pneumatico
Valvole a spola /-5/-5/ con attacchi filettati G/8 -G/4 /-5/-5/ spool valves with G/8 -G/4 threaded ports Montaggio in linea, su collettori multipli o su basi manifold (pag. 9-0) Installation in-line,
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationMINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
More informationV44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves
V/V series, x /, / & / > > x/, / and / valves, ISO 07-/ VDMA 6, Size 6 mm > > Solenoid and pilot actuated > > High performance, compact design > > Flexible sub-base system > > Multipressure system capability
More informationINTEGRATED ELEMENTS. 1. FLIP-FLOP VALVES (pneumatic) ORDER CODIFICATION : AZ100354
INTEGRATED ELEMENTS 1. FLIP-FLOP VALVES (pneumatic) It frequently happens that with only one pilot signal available it is necessary to determine any reciprocating movement having two stationary positions.
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More information1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
More informationSOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
More information14,5 PSC PSP PSR. INTEGRATED SUB-BASE MANIFOLD valve with no subbase
PS COMBOBOX Valves PSC Single electric connection INTEGRATED SUB-BASE MANIFOLD valve with no subbase REDUCED DIMENSIONS Space saving up to 0% in comparison with standard valve MANIFOLDS HIGH FLOW RATE
More informationRemote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
More informationThe extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).
/2- and 4/2-multi-way valves ; servo-assisted; block assembly or NAMUR flange; DN 4; flow rate: 00 l/min Advantages / Benefits II 2G EEx ia IIC T6 PTB0 ATEX 275 approved Available for block assembly and
More informationTransmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
More informationRemote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
More informationMiniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
More informationvalvole ISO 5599/1 taglia 1
valvole ISO 5599/1 taglia 1 ISO 5599/1 valves - size 1 Valvole a spola 5/-5/3 5/-5/3 spool valves Montaggio su basi modulari o a posti fissi Installation on manifolds or multiple sub-bases Azionatore manuale
More informationSeries 77 & 78. Compact & Modular Valves. solutions. Series 77 - Compact Valves. Series 77 - Sub-D. Series 77 - Fieldbus
PNEUMATIC valves Series 77 & 78 Compact & Modular Valves Series 77 - Compact Valves Series 77 - LPP770 Series 77 - Sub-D Series 77 - Fieldbus Series 77 - LPP772 Series 77 - Coils & Plug-in sockets Series
More informationC 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil
More informationAir Service Units Filter pressure regulator + Lubricator - Size 1. Series Technical characteristics. Construction and working characteristics
ir Service Units Filter pressure regulator + Lubricator - Size Series 00 Construction and working characteristics - Zinc alloy body or reinforced technopolymer body with threaded brass insert connections.
More informationWAYS BALL VALVES WITH ADA ACTUATOR
783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full
More informationLockable isolation 3/2-way valves Series MX 3/
CATALOGUE > Release 8.5 > /2-way isolation valves Series MX Lockable isolation /2-way valves Series MX New MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Manual, electro-pneumatic, servo-pilot and
More informationBody width of 10mm, Nl/min (49.08) 2W (Standard) Nl/min (78.52) 4W (U type: Large flow) Vacuum applications possible (up to 100kPa) 3 S.
High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure of 0.5MPa, subject to clean, dry air) 4 Port Direct
More informationBM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/8, 600 660 Nl/min (0.610 0.671 Cv) Technical data for series BM-01 Order code BM-01-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
More informationAirLINE and AirLINE Quick electrical/pneumatic Automation System
AirLINE and AirLINE Quick electrical/pneumatic Automation System Type 8644 can be combined with Fully compatible with Rockwell Combination of Fieldbus, pilot valves and I/O modules higher fl exibility
More informationBM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
More informationElectro-pneumatic control valves
Electropneumatic control valves Visit our website for further information www.crouzet.com 9 Electropneumatic miniature solenoid Miniature solenoid valves Terminals Wires Connector LED indicators Valve
More informationHERION. MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES. Flexible subbase system with a wide range of accessories
MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES HERION ISO 15407-1 / VDMA 24563 Brochure N-288 Compact design and high performance The right spool technology for critical pneumatic
More informationElectrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More informationSolenoid valves "OPTYMA32-S" General. Series 2200
1 General Series 2200 1 Series 2200 Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP 12 = 24 VDC NPN Weight gr. 67 SHORT FUNCTION CODE "A" Serie Solenoid 2200-S-GB valves - Spring "OPTYMA32-S"
More informationSolenoid valve, Metal
Solenoid valve, etal Construction The 4/2 way compact indirectly controlled valve with aluminium body, piston slide valve and detachable coil encapsulated in plastic has got a T-ring piston slide valve
More informationElectrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
More informationSBM TECHNOLOGY Cooling / Air Recovery Valve
SBM TECHNOLOGY Cooling / Air Recovery Valve Part no. VSP15203x Advanced high pressure seal technology Integrated non-return valve Robust, compact & lightweight design Proven & reliable technology Maintenance
More informationV New VSVA. Solenoid/pneumatic valves, ISO Electrically or pneumatically actuated valves. With internal or external pilot air
V New VSVA B01_01_001_E Solenoid/pneumatic valves, ISO 15 407 1 Electrically or pneumatically actuated valves With internal or external pilot air Pneumatic or mechanical reset Ausgewählte Typen nach ATEX
More informationVAL-138. Valves. Electrical Details for Solenoid Pilot. Operating Pressure
Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot ctuated ISO 5407- / VDM 24 563 Size 26 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich
More informationRelated Products VR4151/4152 Relay Valve
Related Products VR4151/4152 Relay Valve Appropriate output sequences are affected according to the signal received from the machanical valve. Specifications 1 Fluid Air Operating pressure 0 to 1.0MPa
More information5/2-5/3 LIGHT VALVES Series AE (SUBBASE) 5/2-5/3 ISO 5599/1 VALVES Series BE (SUBBASE)
/-/ LIGHT VLVS Series (SUBBS) /-/ ISO / VLVS Series B (SUBBS) Light series valves for ISO / sub-base mounting Light series: technopolymer valve body with metall cover Interchangeability: ISO / sub-base
More informationSeries 581 ISO Pneumatic Directional Control Valves
Series 581 ISO 5599-1 Pneumatic Directional Control Valves Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series 581 - A complete series of standardized
More informationSection 6. Four Station Nugget 30 High Flow Micro Valve with 25-pin D connector and Pneufit Fittings
Section 6 Nugget 30 Series Valves 5/2 and 5/3-position, high flow, compressed air micro valve with compact, lightweight 10mm body, and interchangeable fittings for 1/8", 5/32", 1/4", 4 or 6 mm tubing.
More informationPSP PSP PSC PSR TECHNICAL CHARACTERISTICS. ComboBox series. Valves. Flow rates according to fittings:
ComboBox series The new ComboBox valves are the result of long reflections regarding the requirements of the modern user, the current market demands, the ever increasing needs in the ergonomical and ecological
More informationControl Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet
More informationDISTRIBUTORS. n o p q. hdm + multi-pole connection TECHNICAL DATA COMPONENTS
+ multi-pole connection HDMs are the ideal solution for those requiring the unbeatable performance, flexibility and modularity of Multimach valves combined with sturdy mechanics and a high degree of protection
More informationPneumatic Pilot - Operated Valves Series 3 and 4
Pneumatic Pilot - Operated Valves Series 3 and 4 Series 3: 1/8 NPTF, 3/2-way and 5/2-way Series 4: 1/8, 1/4 NPTF 3/2, 5/2 and 5/3-way The pneumatically operated, 3/2-way, 5/2-way and 5/3-way, Series 3
More informationTECHNICAL CHARACTERISTICS
BE series IO 5599/ valves 5/5/3 UNIVER, particularly sensible to market requirements, has introduced in its production program a new line of valves for IO subbases. These valves are identical in dimensions
More informationMulti Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
More information