C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5
|
|
|
- Damon Dorsey
- 6 years ago
- Views:
Transcription
1 CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil Power consumption Connector Voltage Manual override C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8, die-cast zamak (G1/8), aluminium () nitrile rubber aluminium AA series/u1-u,5 W (DC) - 5 VA (AC) AM V DC - 24 V DC - 24 V AC V AC - 20 V AC two-position screw NOTE: some versions with high temperature seals are available upon request (for further information please refer to our Sales Office) UNIVERSAL System modularity MECHANICAL MANUAL ELECTRICAL PNEUMATIC Valves /2 5/2-5/ MECHANICAL CONTROL 1 Ball push 2 Ball push for screw panel mounting Ball push with dust protection 4 Roller with dust protection 5 Roller lever 6 One-way roller lever 7 Two-way side roller lever MANUAL CONTROL Push-pull Push buttom Rotating lever Selector short/long lever 1 Short/long lever 14 Threaded indirect operation 15 Panel direct operation 16 Panel indirect operation ELECTRICAL CONTROL 17 Electrical amplified 18 U1 electropilot 19 Plate for external pilot supply 20 Angle plate for "H" solenoid option 21 Angle plate for "P" solenoid option PNEUMATIC CONTROL 22 Pneumatic amplified BODY 2 /2 Body 24 5/2 Body RETURN 25 Mechanical spring 26 Pneumatic not amplified 27 Bottom plate - 2/ positions 28 Bottom plate 29 Pneumatic spring 0 Pneumatic amplified 67
2 CL/CM UNIVERSAL Valves G1/8 - Valves G1/8 with direct mechanical operation Roller lever One-way roller lever CL-100A CM-400A CL-101A CM-401A CL-100P CM-400P CL-101P CM-401P NEW - Two-way side roller lever NEW - Adjustable two-way side roller lever CL-106A CM-406A CL-106AL CM-406AL Ball-push Roller with dust protection CL-102A CM-402A CL-105A CM-405A CL-102P CM-402P CL-105P CM-405P Ball push with dust protection Ball push for screw panel mounting CL-104A CM-404A CL-10A CM-40A CL-104P CM-404P CL-10P CM-40P Valves with direct mechanical operation Ball push Ball push for screw panel mounting CL-9102A CM-9402A CL-910A CM-940A CL-9102P CM-9402P CL-910P CM-940P 68
3 Valves CL/CM UNIVERSAL Valves G1/8 - Valves G1/8 - with indirect mechanical operation for pneumatic and mechanical operators Ball push Sensible ball push CL-110A CL-9110A CM-410A CM-9410A CL-111A CL-9111A CM-411A CM-9411A CL-110P CL-9110P CM-410P CM-9410P CL-111P CL-9111P CM-411P CM-9411P AI-550 AI-551 AI-560 AI-562 AI-56 AI-570 AI-571 AI-572 AI-511 AI-514 AI-515 AI-520 AI-522 AI-524 AI-525 AI-526 AI-512 AI-516 AI-517 AI-521 AI-52 AI-51 AI-514D AI-519 AI-516D Valves G1/8 - with direct and indirect operation for panel operators Ball push (direct operation) Ball push (indirect operation) CL-112A CM-412A CL-11A CL-911A CM-41A CM-941A CL-112P CM-412P CL-11P CL-911P CM-41P CM-941P AI-511Q AI-514Q AI-515Q AI-524Q AI-511Q AI-514Q AI-515Q AI-520Q AI-524Q AI-522Q AI-525Q AI-526Q AI-512Q AI-516Q AI-517Q AI-512Q AI-516Q AI-517Q AI-521Q AI-52Q AI-51Q AI-514QD AI-519Q AI-51Q AI-514QD AI-519Q AI-516QD AI-516QD 69
4 CL/CM UNIVERSAL Valves G1/8 - Valves G1/8 with manual operation Push-pull CL-120 CM-420 CL-120A CL-120P CM-420A CM-420P CP-911G CP-911R CP-911N GREEN CP-911V Long lever CL-118R CM-418R Short lever CL-119R CM-419R LONG LEVER UPON REQUEST CL-121R CM-421R CL-122R CM-422R SHORT LEVER UPON REQUEST GREEN Button CL-126A CM-426A Rotating lever CL-10 CM-40 CM-40E CM-45E CM-440E CP-915R CP-916R 90 Lever - positions SHORT LEVER CL-12 CM-42 CP-912G CP-912R CP-912N CL-12D CL-12A CM-42D CM-42A LONG LEVER CP-91R CM-42E CM-42F CM-424E CM-424F CM-425E CM-425F 70
5 Valves CL/CM UNIVERSAL Valves G1/8 - Valves with manual operation Push-pull CL-9120 CM-9420 CL-9120A CL-9120P CM-9420A CM-9420P CP-911G CP-911R CP-911N GREEN CP-911V Long lever CL-9118R CM-9418R UPON REQUEST CL-9121R CM-9421R Rotating lever CL-910 CM-940 CM-940E CM-9440E CP-915R CM-945E CP-916R 90 Lever - positions SHORT LEVER CL-912 CM-942 CP-912G CP-912R CP-912N CL-912D CL-912A CM-942D CM-942A LONG LEVER CP-91R CM-942E CM-942F CM-9424E CM-9424F CM-9425E CM-9425F 71
6 CL/CM UNIVERSAL Valves G1/8 - Valves G1/8 - with pneumatic operation Single impulse CL-200 G1/8 CL-9200 CL-20 G1/8 CL-920 CL-200A G1/8 CL-9200A CM-500 G1/8 CM-9500 CM-500A G1/8 CM-9500A Double impulse CL-220 G1/8 CL-9220 CL-221 G1/8 CL-9221 CL-224 G1/8 CL-9224 CM-521 G1/8 CM-9521 CM-524 G1/8 CM-9524 CM-520 G1/8 CM-9520 CM-580 G1/8 CM-9580 CM-585 G1/8 CM-9585 CM-590 G1/8 CM-9590 Valves G1/8 - with electrical operation Single impulse CL-00 G1/8 CL-900 CL-02A G1/8 CL-902A CL-01 G1/8 CL-901 CL-0A G1/8 CL-90A CM-600 G1/8 CM-9600 CM-602A G1/8 CM-9602A Double impulse CL-20 G1/8 CL-920 CL-21 G1/8 CL-921 CL-22 G1/8 CL-922 CM-620 G1/8 CM-9620 CM-621 G1/8 CM-9621 CM-622 G1/8 CM-9622 CM-680 G1/8 CM-9680 CM-685 G1/8 CM-9685 CM-690 G1/8 CM-9690 Solenoid valves are supplied without coil / connector / locking nut 72
7 Valves CL/CM UNIVERSAL Valves G1/8 - AM-5148 AM-5151 AM-5152 Plate for external pilot supply Angle plate for "H" solenoid option Angle plate for "P" solenoid option CLIPS Modular sub-base G1/8 - for /2-5/2-5/ valves G1/8 CP-100/CP-9100 CP-101/CP-9101 CP-105/CP-9105 CP-106 modular sub-base with adjustable and conveyed exhausts CP-100 for G1/8, CP-9100 for material: zamak modular sub-base without adjustable exhaust CP-101 for G1/8, CP-9101 for material: zamak side connections inlet plate connections: CP-105, CP-9105 G/8 material: zamak closing plate for unused place material: aluminium standard supplied: screws, seals, exhaust regulator and couplig for valve fixing standard supplied: screws, seals and copuling for valve fixing standard supplied: screws and seals CP-110/CP-9110 CP-111/CP-9111 CP-112/CP-9112 CP-11/CP-911 coupling connections: CP-110 G1/8, CP-9110 material: brass pressure separator CP-111 for G1/8, CP-9111 for material: aluminium plug for /2 valve mounting CP-112 for G1/8, CP-9112 for material: aluminium adjustment screw CP-11 for G1/8, CP-911 for material: brass For each additional pressure, one coupling and two separators are required Plug for mounting /2 NC-NO valves on CLIPS sub-base to close unused way. Sub-base with adjustment screw (screwdriver slot) standard supplied. Upon request: adjustment needle with milled handle Manifold assembly example by different pressures G1/8 A G/8 B G1/ Pressure separator CP-111/CP-9111 Fixing coupling for valve embodied in the sub-base Coupling CP-110/CP
14,5 PSC PSP PSR. INTEGRATED SUB-BASE MANIFOLD valve with no subbase
PS COMBOBOX Valves PSC Single electric connection INTEGRATED SUB-BASE MANIFOLD valve with no subbase REDUCED DIMENSIONS Space saving up to 0% in comparison with standard valve MANIFOLDS HIGH FLOW RATE
TECHNICAL CHARACTERISTICS
Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation
zamak nitrile rubber self-extinguishing technopolymes aluminum
0 mm - G /8 Valves and solenoid valves - G/8 threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
F NI/min. (G1/8), 1600 NI/min. (G1/4), 4600 NI/min.
Series AC Univer : Threaded and Solenoid, Mixed 5/; G/8", /" and /" Diecast aluminum Body 55 psi Operating pressure F Ambient temperature ABOUT UNIVER SERIES AC The "Mixed" system, which has been produced
5/2-5/3 VALVES (1/8" + SUBBASE) Series G
/-/ VLVES (/" SUBBSE) Series G G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact
TECHNICAL CHARACTERISTICS
BE series IO 5599/ valves 5/5/3 UNIVER, particularly sensible to market requirements, has introduced in its production program a new line of valves for IO subbases. These valves are identical in dimensions
2,1 2, , ,1 2, W (DC) - 10 VA (AC) AM-5111 U2 DB 12 V DC - 24 V DC - 24 V AC V AC V AC IP65
B Miniature Electropilots CHRCTERISTICS mbient temperature Fluid Coutation system Connections Nominal bore () Nominal flow rate (Nl/min) Power consumption Connector Sleeve Coil Voltage Protection degree
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO 5599- #, #2, #3, #4 Steel reinforced main seals 6 bar and 0 bar CNOMO solenoid pilots with locking or non-locking manual override Low
Miniature electropilots U2
Direct intervention electropilots with poppet valve system and bottom cushioned ssembly on subbase Threaded connections on the body CNOMO interface Orientable coil (360 ) separated from mechanical part
5/2-5/3 LIGHT VALVES Series AE (SUBBASE) 5/2-5/3 ISO 5599/1 VALVES Series BE (SUBBASE)
/-/ LIGHT VLVS Series (SUBBS) /-/ ISO / VLVS Series B (SUBBS) Light series valves for ISO / sub-base mounting Light series: technopolymer valve body with metall cover Interchangeability: ISO / sub-base
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
Electrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
PSP PSP PSC PSR TECHNICAL CHARACTERISTICS. ComboBox series. Valves. Flow rates according to fittings:
ComboBox series The new ComboBox valves are the result of long reflections regarding the requirements of the modern user, the current market demands, the ever increasing needs in the ergonomical and ecological
Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
ESSENTIAL. Valves. EL series. 18 mm - G1/8 22 mm - G1/4 PNEUMATIC AUTOMATION
ESSENTIAL Valves EL series 18 mm - G1/8 22 mm - G1/4 PNEUMATIC AUTOMATION ESSENTIAL Valves EL series 18 mm (G1/8) 22 mm (G1/4) HIGH FLOW RATE 800 Nl/min (G1/8) 1700 Nl/min (G1/4) REDUCED DIMENSIONS 18
Mechanically actuated valves
Mechanically actuated valves 3/2-5/2 spool valves with 1/8-1/4" NPT threaded ports BSP version avaiable on request Installation in any position Comprehensive range of actuations, direct or servo-piloted
Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
Series MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/8, 600 660 Nl/min (0.610 0.671 Cv) Technical data for series BM-01 Order code BM-01-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
AUTO STAR with central connector M12x1
with central connector M2x Non corrosive spool and sleeve for long trouble free life 5/2 and Glandless Valves Actuated Sub-base Mounted ISO 5599- #, #2, #3 6 bar (4,5 W) and 0 bar (2 W) 24V DC solenoids
NAMUR Technical details
Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free
seriesuk Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1
seriesuk Poppet valves pilot and actuated G 1/8 - G 1/4 - G 1/ - G 1 DESCRIPTION Valves series "UK" are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
Nugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
Series 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).
> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the
MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Valves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
Complete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
VALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
NAMUR Technical details
Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered,
series UK Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1 DESCRIPTION MATERIALS TECHNICAL DATA Poppet valves series UK
DESCRIPTION Valves series UK are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes G 1/8 and G 1/4, support the 15 mm direct acting valve (type UMCSV
SOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
Rubber Seal VP300/500/700
Port Pilot Operated Poppet Rubber Seal 00/500/700 High flow capacity Cv1.0 (00), Cv. (500), Cv.0 (700) Low power consumption: 1.8W(DC) Possible to use as either selector valve or divider valve Changeable
COMPACT VALVE - 1/2 Series DS2
COMPACT VALVE - G1/ Features Suitable for manifold mounting Mounting provision for individual unit Compact size Manual override Wide range of manifolds available Wide range of coil voltages Technical Specifications
B1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
COMPACT VALVE - 1/4 Series DS2
COMPACT VALVE - G1/4 Features Suitable for manifold mounting Mounting provision for individual unit Compact size Manual override Wide range of manifolds available Wide range of coil voltages Important
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Rated voltage Body
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
MINI-SOLENOID VALVES direct operated subbase mounted, CNOMO (15 mm width) connector size 15
MINI-SOLENOID VALVES direct operated subbase mounted, CNOMO ( mm width) connector size / Series 0 FEATURES Low consumption (0,W) Compact, monobloc solenoid pilot valve with spade-plug connector type AMP,8x0,
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
![[Vacuum valves and solenoid valves] 4](/thumbs/95/125066489.jpg "[Vacuum valves and solenoid valves] 4")
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
V New VSVA. Solenoid/pneumatic valves, ISO Electrically or pneumatically actuated valves. With internal or external pilot air
V New VSVA B01_01_001_E Solenoid/pneumatic valves, ISO 15 407 1 Electrically or pneumatically actuated valves With internal or external pilot air Pneumatic or mechanical reset Ausgewählte Typen nach ATEX
3/2-5/2 ports / positions
Series SOLENOID SPOOL VALVES G / THREADED PORTS with CNOMO pilots /-/ ports / positions SPECIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PORTS : G/ PRESSURE : to 0 bar TEMPERATURE RANGE
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
Solumatics Engineering (M) Sdn. Bhd. Water Solenoid Valve. Steam Solenoid Valve. 1 of 32
Solumatics Engineering (M) Sdn. Bhd. Water Solenoid Valve Steam Solenoid Valve 1 of 32 Stainless Steel Solenoid Valve Stainless Steel Flange End Solenoid Valve 2 of 32 Solenoid Pilot Operated Valve For
Lockable isolation 3/2-way valves Series MX 3/
CATALOGUE > Release 8.5 > /2-way isolation valves Series MX Lockable isolation /2-way valves Series MX New MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Manual, electro-pneumatic, servo-pilot and
V44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves
V/V series, x /, / & / > > x/, / and / valves, ISO 07-/ VDMA 6, Size 6 mm > > Solenoid and pilot actuated > > High performance, compact design > > Flexible sub-base system > > Multipressure system capability
Chapter 10: Valves for Pipe Mounting
Contents Chapter : Valves for Pipe Mounting Series Description Size Body Page DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 1¼ 1½ 2 L-port T-port Pressure valves, manual operation R4V R4R Pressure relief function Pressure
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
4-way pneumatic valves for pipe connection/sub-base mounting
4-way pneumatic valves for pipe connection/sub-base mounting Port size G Orifice () Flow factors (L/min Qn Admissible differential pressure bar Min Max Fluid temp. C Gas Seat disc Reference numbers Power
CABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L
CABINET MOUNTING 501 series FEATURES The 501 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI
System 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
GENERAL PURPOSE. 3 Port 1/8 Pilot Valves Two Hands Safety Valve BC 1/4 Body Ported Valves : Mechanically Operated...
GENERAL PURPOSE 3 Port 1/8 Pilot Valves.........................19 Two Hands Safety Valve....................... 199 BC 1/ Body Ported Valves :.................... 00 Mechanically Operated.................
Pneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.
> Series 4 valves and solenoid valves Series 4 valves and solenoid valves New models 3/, 5/ and 5/3-way CC, CO Ports: G1/8, G1/4, G1/ Series 4 solenoid valves have been designed in the 3/, 5/, 5/3 versions
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Instruction General Vacuum Valve program
032R9317 032R9317 Contents page 1.Introduction 2.Installation 2.1 Electromagnetically Operated Valve 2.2 Pneumatically Operated Valve 2.3 Manually Operated Valve 1-2 3-4 5-8 9-11 12 1 Introduction This
Bus / Coach Door Obstruction Detection
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Bus / Coach Door Obstruction Detection Bulletin 0600-B78 Door Sensing
Chapter 11: Valves and Actuators with the NAMUR-interface
Right of authorship: the content of the training (wording, drawings, pictures) are owned by the author. Any utilization except for individual use is allowed only after permission of the author. Valves
Super X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated
> > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Series
PNEUMATI valves Series 79-8 - 84-85 - 87 Steelspool Valves Solenoid Valves Mechanical Valves Pneumatic Valves oils & Plug-in sockets VM/EN 4 The components illustrated and described in the present calalogue
On-off Valves MS-EE, Inch Series Overview
On-off Valves MS-EE, Inch Series Overview Electrically actuated on-off valve for pressurising and exhausting pneumatic systems Choice of three voltage ranges 2 sizes: MS4 grid dimension.6 in, MS6 grid
System 13. ü ( System 13
System ü www.nassmagnet.com ( +9 676-0 System The name System stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all
CABINET MOUNTING. 501 series
CABINET MOUNTING 50 series FEATURES The new 50 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F Metric Series Overview
Overview Modular multi-functional valve manifold for up to 3 valves: Type 44 VTSA, ISO 15407-/ISO 5599- Type 45 VTSA-F with optimized flow Different valve sizes on one valve manifold: 18 mm (ISO 0) 6 mm
Valves For Process Industry. Engineered Pneumatic Solutions.
Valves For Process Industry Engineered Pneumatic Solutions www.pneumatrol.com Pneumatrol Limited (formerly RGS Davis) is a specialist manufacturer accredited to ISO 9001. Operating from its headquarters
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually
APPLICATION OF SYSTEM 8
System 8 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approimately
Pneumatic Valve 4V100 Series
tic Valves Pneumatic Valve 4V100 4V100 Low power consumption exhaust for the pilot and main valve, small size, large flow, good appearance, flexible, can be integrated installation, high wear resistant
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
0322, 0324, Pilot Solenoid Valve, Plastic
Pilot Solenoid Valve, Plastic Construction The directly controlled GEMÜ 3/2-way pilot solenoid valve consists of an epoxy encapsulated detachable coil and a plastic body. The electrical connection is made
Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN Type of actuation. Option.
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Body option Body
VALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators and
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
ICO2S - 2/2, 3/2 or 5/2 Exia poppet valves Electromagnetically actuated, solenoid pilot operated
ICOS - /, / or 5/ Exia poppet valves > > Port size: /... / (ISO G/NPT) /... (Flanged) > > Zone 0, Exia solenoid pilot operated valve > > Safety integrity level and > > Reliable and long life, ideal for
W1000/W3000/W4000/W8000 Series
Filter and W/W/W/ Series New Series of m elements for dust removal, and m elements for tar removal : / to JIS symbol Specifications Descriptions Appearance W W W nic sensor Pressure Working fluid Max.
Manually actuated valves
Manually actuated valves 3/2-5/2-5/3 spool valves with /8 - /4 - /2" NPT threaded ports, BSP version avaiable on request Installation in any position Comprehensive range of actuations Push/pull and lever
DIRECT OPERATED SOLENOID PILOT VALVES Product Index
DIRECT OPERATED SOLENOID PILOT VALVES Product Index ports/positions Function pipe connections * - instant fittings O.D. (mm) w - internal thread (ØG) x - external thread (ØG) n - pad mount : - pad mount,
Solenoid valves VUVS/valve manifold VTUS, NPT
Solenoid valves VUVS/valve manifold VTUS, NPT Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with a long service life
Solenoid/pneumatic valves, Tiger Classic
Solenoid/pneumatic valves, Tiger Classic Electrically or pneumatically actuated valves With internal or external pilot air Sturdy and reliable Specified types in accordance with ATEX directive for potentially
300 SERIES DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS
DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Diecast aluminium (anodised) Body Diecast aluminium (anodised) Pilot base Brass (chromed) Pilot Diaphragm NBR Bolts and screws