BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
|
|
|
- Bernard Chase
- 5 years ago
- Views:
Transcription
1 Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series BM-01 Order code BM HNR-162 Series and function BM = Standard Manual override HNT = non-detented HNR = detented Standard voltage 12 V DC, 1 W 24 V DC, 1 W 24 V AC, 3 VA 115 V AC, 3 VA 230 V AC, 3 VA Coil options upward 1) downward 1) ) The solenoid can be supplied with plug socket connection and on the same side as ports 2 and 4 or on the same side as ports 1, 3 and 5. When the valve is requested without the plug socket, the first digit of the order code for standard coils must be changed from 1 to 4. For optional plug sockets see page Design and function Spool valve actuated by an electrical signal. Please specify required control voltage when ordering. Order number BM HN BM HN Please complete according to order code. Function 3/2-way 3/2-way NC NO Connection G 1/8 Nominal size 5 mm Flow rate 660 Nl/min (0.671 Cv) 600 Nl/min (0.610 Cv) Pressure range 2 8 bar ( psi) Control pressure Control pressure is identical to main pressure range Response on 19 ms on 16 ms time at 6 bar off 32 ms off 30 ms Temperature range 5 hc hc (+ 23 F F) Materials Body: Al (anodized) and PA, Seals: NBR and PU, Inner parts: Al, brass and POM Degree of protection IP 65 according to EN Weight 0,108 kg (0.238 lb.) 0,110 kg (0.242 lb.) Subject to change
2 Electrically operated valves 2 x 3/2-way G 1/8, Nl/min ( Cv) Technical data for series BM-01 4 Order code BM HNR-162 Series and function BM = Standard Manual override HNT = non-detented HNR = detented Standard voltage 12 V DC, 1 W 24 V DC, 1 W 24 V AC, 3 VA 115 V AC, 3 VA 230 V AC, 3 VA Coil options upward 1) downward 1) ) The solenoid can be supplied with plug socket connection and on the same side as ports 2 and 4 or on the same side as ports 1, 3 and 5. When the valve is requested without the plug socket, the first digit of the order code for standard coils must be changed from 1 to 4. For optional plug sockets see page Design and function Spool valve actuated by an electrical signal. Please specify required control voltage when ordering. Order number BM /2-HN BM /2-HN BM /2-HN Please complete according to order code. Function 2 x 3/2-way 2 x 3/2-way 2 x 3/2-way NC NO NO/NC Connection G 1/8 Nominal size 5 mm Flow rate 650 Nl/min (0.661 Cv) 550 Nl/min (0.559 Cv) 580 Nl/min (0.589 Cv) Pressure range 2 8 bar ( psi) Control pressure Control pressure is identical to main pressure range Response on 18 ms on 19 ms time at 6 bar off 34 ms off 32 ms Temperature range 5 hc hc (+ 23 F F) Materials Body: Al (anodized) and PA, Seals: NBR and PU, Inner parts: Al, brass and POM Degree of protection IP 65 according to EN Weight 0,154 kg (0.339 lb.) Subject to change 4.091
3 Electrically operated valves 5/2-way G 1/8, Nl/min ( Cv) Technical data for series BM-01 Order code BM HNR-162 Series and function BM = Standard BME = Valves with external pilot supply Manual override HNT = non-detented HNR = detented Standard voltage 12 V DC, 1 W 24 V DC, 1 W 24 V AC, 3 VA 115 V AC, 3 VA 230 V AC, 3 VA Coil options upward 1) downward 1) ) The solenoid can be supplied with plug socket connection and on the same side as ports 2 and 4 or on the same side as ports 1, 3 and 5. When the valve is requested without the plug socket, the first digit of the order code for standard coils must be changed from 1 to 4. For optional plug sockets see page Design and function Spool valve actuated by an electrical signal. Please specify required control voltage when ordering. Order number BM HN BM HN BM HN BME HN BME HN Please complete according to order code. Function 5/2-way 5/2-way 5/2-way 5/2-way 5/2-way single solenoid single solenoid double solenoid single solenoid double solenoid air spring return spring return ext. pilot supply ext. pilot supply Connection G 1/8 Nominal size 5 mm Flow rate 780 Nl/min 800 Nl/min 790 Nl/min 800 Nl/min 790 Nl/min (0.793 Cv) (0.813 Cv) (0.803 Cv) (0.813 Cv) (0.803 Cv) Pressure range 2 8 bar 3 8 bar 2 8 bar 0,95 8 bar ( psi) ( psi) ( psi) ( psi) Control pressure Control pressure is identical to main pressure range 3 8 bar 2 8 bar ( psi) ( psi) Response on 17 ms on 15 ms on 15 ms 13 ms time at 6 bar off 32 ms off 35 ms off 35 ms 13 ms Temperature range 5 hc hc (+ 23 F F) Materials Body: Al (anodized) and PA, Seals: NBR and PU, Inner parts: Al, brass and POM Degree of protection IP 65 according to EN Weight 0,118 kg (0.260 lb.) 0,120 kg (0.264 lb.) 0,156 kg (0.344 lb.) 0,126 kg (0.278 lb.) 0,168 kg (0.370 lb.) Subject to change
4 Electrically operated valves 5/3-way G 1/8, Nl/min ( Cv) Technical data for series BM-01 4 Order code BM HNR-162 Series and function BM = Standard BME = Valves with external pilot supply Manual override HNT = non-detented HNR = detented Standard voltage 12 V DC, 1 W 24 V DC, 1 W 24 V AC, 3 VA 115 V AC, 3 VA 230 V AC, 3 VA Coil options upward 1) downward 1) ) The solenoid can be supplied with plug socket connection and on the same side as ports 2 and 4 or on the same side as ports 1, 3 and 5. When the valve is requested without the plug socket, the first digit of the order code for standard coils must be changed from 1 to 4. For optional plug sockets see page Design and function Spool valve actuated by an electrical signal. Please specify required control voltage when ordering. Order number BM HN BM HN BM HN BME HN BME HN BME HN Please complete according to order code. Function 5/3-way 5/3-way 5/3-way 5/3-way 5/3-way 5/3-way center position center position center position center position center position center position closed exhausted pressurized closed exhausted pressurized ext. pilot supply ext. pilot supply ext. pilot supply Connection G 1/8 Nominal size 5 mm Flow rate 690 Nl/min 670 Nl/min 1030 Nl/min 690 Nl/min 670 Nl/min 1030 Nl/min (0.701 Cv) (0.681 Cv) (1.047 Cv) (0.701 Cv) (0.681 Cv) (1.047 Cv) Pressure range 3 8 bar ( psi) 0,95 8 bar ( psi) Control pressure Control pressure is identical to main pressure range bar ( psi) Response on 16 ms on 17 ms on 16 ms on 17 ms 17 ms 17 ms time at 6 bar off 43 ms off 49 ms off 43 ms off 49 ms Temperature range 5 hc hc (+ 23 F F) Materials Body: Al (anodized) and PA, Seals: NBR and PU, Inner parts: Al, brass and POM Degree of protection IP 65 according to EN Weight 0,154 kg (0.339 lb.) 0,166 kg (0.366 lb.) Subject to change 4.093
5 Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Dimensions for series BM-01 BM HN, BM HN 1 = pressure inlet 2, 4 = outlets 3, 5 = exhausts (6) = Pilot air exhaust, M5 (7) = Manual override, detented or non-detented (8) = plug socket can be repositioned by 180 (9) = Solenoid, pins for plug socket connection upward or downward Subject to change
6 Electrically operated valves 2 x 3/2-, 5/2- and 5/3-way G 1/8, Nl/min ( Cv) Dimensions for series BM-01 BM HN, BM HN 4 1 = pressure inlet 2, 4 = outlets 3, 5 = exhausts (6) = Pilot air exhaust, M5 (7) = Manual override, detented or non-detented (8) = plug socket can be repositioned by 180 (9) = Solenoid, pins for plug socket connection upward or downward BM /2-HN, BM /2-HN, BM /2-HN, BM HN, BM HN, BM HN, BM HN 1 = pressure inlet 2, 4 = outlets 3, 5 = exhausts (6) = Pilot air exhaust, M5 (7) = Manual override, detented or non-detented (8) = plug socket can be repositioned by 180 (9) = Solenoid, pins for plug socket connection upward or downward Subject to change 4.095
7 Electrically operated valves with ext. pilot supply G 1/8, 750 Nl/min (0.762 Cv) Dimensions for series BME-01 BME HN 1 = pressure inlet 2, 4 = outlets 3, 5 = exhausts (5) = ext. pilot supply, M5 (6) = Pilot air exhaust, M5 (7) = Manual override, detented or non-detented (8) = plug socket can be repositioned by 180 (9) = Solenoid, pins for plug socket connection upward or downward BME HN, BME HN, BME HN, BME HN 1 = pressure inlet 2, 4 = outlets 3, 5 = exhausts (5) = ext. pilot supply, M5 (6) = Pilot air exhaust, M5 (7) = Manual override, detented or non-detented (8) = plug socket can be repositioned by 180 (9) = Solenoid, pins for plug socket connection upward or downward Subject to change
8 Accessories for electrically operated valves series BM-01 Accessories for series BM-01, BME-01 Solenoid 4 Solenoid with pins for plug socket connection on the same side as (upward). 23-M page Solenoid with pins for plug socket connection on the opposite side of the manual override (downward). 23-M page s Standard plug socket 28-ST-02-1 page with LED 28-ST page with LED and circuit protection 28-ST page Subject to change 4.097
9 Manifolds for electrically operated valves series BM-01 Accessories for series BM-01, BME-01 Manifolds Manifold will be delivered completely assembled with valves if requested. Manifold with n/stations. Ports on the side. RF-01-AB/n Manifold with n/stations. Ports on the side and the top. RF-01-CD/n Manifold with n/stations. Ports on both sides and top. RF-01-AD/n One station element. RF-01-Z Blind plate for blank valve station. RF-01-V Adapter plate for additional air supply and exhaust. RF-01-PE End plate A with side ports. RF-01-EA End plate B with side ports. RF-01-EB End plate C with side and top ports. RF-01-EC End plate D with side and top ports. RF-01-ED Additional single elements: RF-01-ZE Add-on element to add one valve station. RF-01-DT Seal plate for two different pressures. RE-26-RSV Check valve for dynamic exhaust pressures. User information Modular manifold system for valve series BM-01. The assembled manifold consists of one station elements (RF-01-Z) and end plates with common supply and exhaust ports. The end plates contain ports to the side (RF-01-EA, RF-01-EB) or at the top and the side (RF-01-EC, RF-01-ED). The manifolds are quickly assembled with the 4 screws and a hexagonal nut. Adding or removing stations is possible at any time. The manifold can be either DIN-rail mounted, screw on by 4 M5 screws or flange mounting via M4 screws. The necessary seals and screws for valve mounting are included in the scope of delivery Subject to change
10 Manifolds for electrically operated valves series BM-01 Accessories for series BM-01, BME-01 Manifold design End plate left RF-01-EA with side ports RF-01-EC with side and top ports RF-01-Z One station element End plate right RF-01-EB with side ports RF-01-ED with side and top ports 4 Screw 1 (1 pair) Hexagonal nut (1 pair) Screw 2 (1 pair) User information To add stations to the manifold without changing screws and nut, the set RF-01-ZE is available. This contains a one station element, a screw to extend the hexagonal nut and seals and screws for valve mounting. Order number Hexagonal nut Screw 1 Screw 2 RF-01-CD/02 21-R-07-07/05 M 5 x 30 M 5 x 30 RF-01-CD/03 21-R-07-07/05 M 5 x 35 M 5 x 35 RF-01-CD/04 21-R-07-07/05 M 5 x 45 M 5 x 45 RF-01-CD/05 21-R-07-07/2 M 5 x 30 M 5 x 30 RF-01-CD/06 21-R-07-07/2 M 5 x 40 M 5 x 40 RF-01-CD/07 21-R-07-07/2 M 5 x 45 M 5 x 45 RF-01-CD/08 21-R-07-07/2 M 5 x 55 M 5 x 55 RF-01-CD/09 21-R-07-07/4 M 5 x 30 M 5 x 30 RF-01-CD/10 21-R-07-07/4 M 5 x 40 M 5 x 40 RF-01-CD/11 21-R-07-07/4 M 5 x 45 M 5 x 45 RF-01-CD/12 21-R-07-07/4 M 5 x 55 M 5 x 55 Order number Hexagonal nut Screw 1 Screw 2 RF-01-AB/02 21-R-07-07/05 M 5 x 16 M 5 x 16 RF-01-AB/03 21-R-07-07/05 M 5 x 25 M 5 x 25 RF-01-AB/04 21-R-07-07/05 M 5 x 30 M 5 x 30 RF-01-AB/05 21-R-07-07/2 M 5 x 20 M 5 x 20 RF-01-AB/06 21-R-07-07/2 M 5 x 25 M 5 x 25 RF-01-AB/07 21-R-07-07/2 M 5 x 35 M 5 x 35 RF-01-AB/08 21-R-07-07/2 M 5 x 40 M 5 x 40 RF-01-AB/09 21-R-07-07/4 M 5 x 16 M 5 x 16 RF-01-AB/10 21-R-07-07/4 M 5 x 25 M 5 x 25 RF-01-AB/11 21-R-07-07/4 M 5 x 35 M 5 x 35 RF-01-AB/12 21-R-07-07/4 M 5 x 40 M 5 x 40 Order number Hexagonal nut Screw 1 Screw 2 RF-01-AD/02 21-R-07-07/05 M 5 x 16 M 5 x 30 RF-01-AD/03 21-R-07-07/05 M 5 x 25 M 5 x 35 RF-01-AD/04 21-R-07-07/05 M 5 x 30 M 5 x 45 RF-01-AD/05 21-R-07-07/2 M 5 x 20 M 5 x 30 RF-01-AD/06 21-R-07-07/2 M 5 x 25 M 5 x 40 RF-01-AD/07 21-R-07-07/2 M 5 x 35 M 5 x 45 RF-01-AD/08 21-R-07-07/2 M 5 x 40 M 5 x 55 RF-01-AD/09 21-R-07-07/4 M 5 x 16 M 5 x 30 RF-01-AD/10 21-R-07-07/4 M 5 x 25 M 5 x 40 RF-01-AD/11 21-R-07-07/4 M 5 x 35 M 5 x 45 RF-01-AD/12 21-R-07-07/4 M 5 x 40 M 5 x 55 Subject to change 4.099
11 Manifolds for electrically operated valves series BM-01 Dimensions for manifolds RF-01-AB Materials: End plate Al (anodized), 1 station element PA, Seals NBR, Screws steel zinc plated Order number A B Weight RF-01-AB/ / / kg (0.331 lb.) RF-01-AB/ / / kg (0.419 lb.) RF-01-AB/ / / kg (0.507 lb.) RF-01-AB/ / / kg (0.595 lb.) RF-01-AB/ / / kg (0.683 lb.) RF-01-AB/ / / kg (0.772 lb.) RF-01-AB/ / / kg (0.860 lb.) RF-01-AB/ / / kg (0.948 lb.) RF-01-AB/ / / kg (1.036 lbs.) RF-01-AB/ / / kg (1.124 lbs.) RF-01-AB/ / / kg (1.212 lbs.) Subject to change
12 Manifolds for electrically operated valves series BM-01 Dimensions for manifolds RF-01-CD 4 Materials: End plate Al (anodized), 1 station element PA, Seals NBR, Screws steel zinc plated Order number A B Weight RF-01-CD/ / / kg (0.661 lb.) RF-01-CD/ / / kg (0.750 lb.) RF-01-CD/ / / kg (0.838 lb.) RF-01-CD/ / / kg (0.926 lb.) RF-01-CD/ / / kg (1.014 lbs.) RF-01-CD/ / / kg (1.102 lbs.) RF-01-CD/ / / kg (1.190 lbs.) RF-01-CD/ / / kg (1.278 lbs.) RF-01-CD/ / / kg (1.367 lbs.) RF-01-CD/ / / kg (1.455 lbs.) RF-01-CD/ / / kg (1.543 lbs.) Subject to change 4.101
13 Manifolds for electrically operated valves series BM-01 Dimensions for manifolds RF-01-AD Materials: End plate Al (anodized), 1 station element PA, Seals NBR, Screws steel zinc plated Order number A B Weight RF-01-AD/ / / kg (0.507 lb.) RF-01-AD/ / / kg (0.595 lb.) RF-01-AD/ / / kg (0.683 lb.) RF-01-AD/ / / kg (0.772 lb.) RF-01-AD/ / / kg (0.860 lb.) RF-01-AD/ / / kg (0.948 lb.) RF-01-AD/ / / kg (1.036 lbs.) RF-01-AD/ / / kg (1.124 lbs.) RF-01-AD/ / / kg (1.212 lbs.) RF-01-AD/ / / kg (1.301 lbs.) RF-01-AD/ / / kg (1.389 lbs.) Subject to change
14 Accessories for electrically operated valves serie BM-01 and BM-02 Solenoid coil 23-M (Contact distance 8 mm) Solenoid pins at the same side as the (HN). Solenoid pins at the opposite side as the (HN). The connection patten of the pins is according to EN form C. Duty cycle 100 %. Order number Standard voltage Power consumption Manual override (HN) Position contact pins 23-M T 23-M T 23-M R 23-M R 23-M T 23-M T 23-M R 23-M R 23-M T 23-M T 23-M R 23-M R 23-M T 23-M T 23-M R 23-M R 23-M T 23-M T 23-M R 23-M R 12 V DC 1 W 24 V DC 1 W 24 V AC 3 VA 115 V AC 3 VA 230 V AC 3 VA Non detented Detented Non detented Detented Non detented Detented Non detented Detented Non detented Detented 28-ST-02-1 (Pin distance 8 mm) AIRTEC solenoid sockets with seal type 28-ST-02-1 are a standard feature of all solenoid valves series using coil type 23-M Cable-l: max. 6.5 mm (0.26 in). Conductor size: max. is 0.75 mm 2 (8 gauge). Degree of protection: IP 65 according to VDE 0470/EN Useable for all available coil voltages. 28-ST-09 and 28-ST-10 (Contact distance 8 mm) AIRTEC solenoid sockets type 28-ST-09-1 and 28-ST-10-1 have a green LED. 28-ST-10-1 has an additional integrated circuit to protect against voltage peaks. Please indicate requested voltage with order. Order number 28-ST ST ST ST Standard voltage 24 V AC/DC 230 V AC 24 V AC/DC 230 V AC Subject to change
BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
Electrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
Series MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
NAMUR Technical details
Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
NAMUR Technical details
Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered,
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
Electrically operated poppet valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series MS- Technical details Connection Nominal size Temperature range Medium Series MS- page Materials M5 1. mm -1 C... +7 C Filtered, oil-free and dried compressed
2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Nugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
40-501, , ,
-9 Silencer, plastic. -5, -5 Silencer, sintered bronze. - Flow control silencer. -5 Check valves. -5 Hand sliding valves. -5, -5 Quick couplings. -5 Miniature regulator, screw-in type.6-55 Check valves.7-56,
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
Pneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.
> Series 4 valves and solenoid valves Series 4 valves and solenoid valves New models 3/, 5/ and 5/3-way CC, CO Ports: G1/8, G1/4, G1/ Series 4 solenoid valves have been designed in the 3/, 5/, 5/3 versions
Directional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
ISO Cylinders Compact Cylinders TC08 Series Plastic Finger Tight Fittings
ISO 632 Cylinders ISO 15552 Cylinders Compact Cylinders TC08 Series Pilot Valves 207-208 209-212 213-21 215 TC15 Series Pilot Valves TC08 Series Solenoid Valves CD7 Series Solenoid Valves CD12 Series Solenoid
Valves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
Pilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
Productinformatie BAFA.NL BAFA.NL A.U.K. MÜLLER GMBH & CO. KG
Productinformatie A.U.K. MÜLLER GMBH & CO. KG Description 14.025.126 series water inlet valves are 2/2-way solenoid valves with an orifice size of 25 mm. They have been developed to control potable water
% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.
Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow
C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil
Control & Power, Inc
Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder
Control Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet
Series 581 ISO Pneumatic Directional Control Valves
Series 581 ISO 5599-1 Pneumatic Directional Control Valves Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series 581 - A complete series of standardized
Pilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
Exhausting equipment for pilot valve not required. Common exhaust port for main and pilot valve (VF1000/3000)
5 Port Pilot Operated Solenoid Valve Rubber Seal Series 1000/3000/5000 Large flow capacity Yet compact size. Low power consumption 1.8 W (DC) Exhausting equipment for pilot valve not required. Common exhaust
V44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves
V/V series, x /, / & / > > x/, / and / valves, ISO 07-/ VDMA 6, Size 6 mm > > Solenoid and pilot actuated > > High performance, compact design > > Flexible sub-base system > > Multipressure system capability
Operating Manual for the RE-19 Multi-pin Valve Terminal
Operating Manual for the RE-19 Multi-pin Valve Terminal Version: RE 19M/05/99 Order no. 54-RE-19-M-GB Contents Introduction...3 RE-19 valve terminal with multi-pin connection...4 Components of the RE-19
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
SOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Rated voltage Body
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
Series VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4
Type of actuation 4 Piping 0 Side ported Bottom ported 4 Without sub-plate Large Size 5 Port Solenoid Valve Rubber Seal Series 50/4 70 Series VP 5 port solenoid valve 5 7 position single position double
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
STC Solenoid Valve List Price
STC Solenoid Valve List Price To Order, Please Specify: 1. Model No. 2. Voltage 3. Electrical Entry Options Voltage & Electrical Connection Options B. Electrical Connection 2V025-1/8 1/8 2/2/2/1 2V025-1/4
Ports. Dr. Breit GmbH Carl-Zeiss-Straße 25 D Heiligenhaus phone-contact:
Solenoid operated EEx d IIC T6 Description of the Valve Directional control valves direct the flow in various directions (P A with 2/2 valves and P A // A T) with 3/2 valves. Available as 2/2 and 3/2 valves,
15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
4/3, 4/2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid
01/08 /3, /2 and 3/2 Directional Valve with Wet-pin AC or DC Solenoid 2.1 Type WE 10...L5X Size (NG) 10 Up to 350 bar Up to 150 L/min Contents Function and configurations -03 Specifications 0 Symbols 05
Series 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).
> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the
2 way ball valve M1 with pneumatic actuator
Praher Plastics Austria GmbH DB/EN/DEEN/14/03/335 Subject to change without prior notice!! General: Valve body: Sealing material: Ball seating joint: Dimensions: PVC-U EPDM / FPM PTFE DN10 DN50 d16 d63
26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves
60, 8007 NAMUR / & / > > Port size: G/ and NAMUR interface > > Easily interchangeable solenoid system > > For single and double operated actuators > > Standard manual override with detent > > Maintenance-free
Directional spool valves, direct operated, with solenoid actuation. Type WE
Directional spool valves, direct operated, with solenoid actuation Type WE RE 23178 Edition: 2013-06 Replaces: 04.09 Size 6 Component series 6X Maximum operating pressure 350 bar [5076 psi] Maximum flow:
Directional spool valves, direct operated, smoothly switching, with solenoid actuation
Directional spool valves, direct operated, smoothly switching, with solenoid actuation Type WE..73 A12 H7564 Features 4/2 or 4/3 directional design Porting pattern according to DIN 24340 form A Porting
26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.
60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard
Complete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
Compact design suitable for use in reduced mounting space. CONTROL > Directly operated solenoid valves Series PN GENERAL DATA
> Directly operated solenoid valves Series PN Directly operated solenoid valves Series PN 3/-way Normally Closed (NC). The solenoid valves can be mounted on a single base (with M5 ports) as well as on
VALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators and
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
V03, V04, V05 (EXCEL 32) 2/2 & 3/2 Direct solenoid actuated poppet valves
V0, V0, V05 (EXCEL ) / & / > > Port size: G/8, G/ > > Extensive range of power and orifice size options > > Choice of manual override > > Compact installation > > Removeable coil > > Standard exhaust diffuser
Directional Control Valve Series D3W (Parker), 4D02 (Denison)
Characteristics Series D3W (Parker), 4D0 (Denison) The direct operated directional control valve size NG10 is available with both Parker (series D3W) and Denison (series 4D0) model codes. Both series are
Pneumatic Valve 4V100 Series
tic Valves Pneumatic Valve 4V100 4V100 Low power consumption exhaust for the pilot and main valve, small size, large flow, good appearance, flexible, can be integrated installation, high wear resistant
TECHNICAL CHARACTERISTICS
Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation
Productinformatie BAFA.NL BAFA.NL A.U.K. MÜLLER GMBH & CO. KG
Productinformatie A.U.K. MÜLLER GMBH & CO. KG Solenoid valves Control valves Special valves and systems GmbH & Co. KG Dresdener Str. 162 D-40595 Düsseldorf/Germany Tel.: +49(0)211-7391-0 Fax: +49(0)211-7391-281
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN Type of actuation. Option.
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Body option Body
Directional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
System 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
Chapter 11: Valves and Actuators with the NAMUR-interface
Right of authorship: the content of the training (wording, drawings, pictures) are owned by the author. Any utilization except for individual use is allowed only after permission of the author. Valves
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
Lockable isolation 3/2-way valves Series MX 3/
CATALOGUE > Release 8.5 > /2-way isolation valves Series MX Lockable isolation /2-way valves Series MX New MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Manual, electro-pneumatic, servo-pilot and
97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT
97 Inline /, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with
Solenoid valves MFHE/Pneumatic valves VLHE
Solenoid valves MFHE/Pneumatic valves VLHE Solenoid valves MFHE/Pneumatic valves VLHE Peripherals overview 2 1 4 3 5 Accessories MFHE VLHE Page/Internet 1 Solenoid coil MSFG/MSFW 8 2 Plug socket with cable
Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Rated voltage Body
FITTINGS CHEST FITTINGS CHEST. Get organized with the Pneuforce Fittings Chest!
FITTINGS CHEST FITTINGS CHEST Get organized with the Pneuforce Fittings Chest! Over 40 Different Compartments Easy Carry Handle Holds and Includes 420 Fittings All threaded Models Have the Unique Pneuforce
Directional spool valves, direct operated, with solenoid actuation. Type WE. Features. Contents. RE Edition: Replaces: 04.
Directional spool valves, direct operated, with solenoid actuation Type WE RE 23178 Edition: 2013-06 Replaces: 04.09 Size 6 Component series 6X Maximum operating pressure 350 bar [5076 psi] Maximum flow:
Pilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
Directional spool valves, direct operated, with solenoid actuation. Type WE. Features. Contents
Directional spool valves, direct operated, with solenoid actuation Type WE H7564 Features 4/3, 4/2 or 3/2 directional design High-power solenoid Porting pattern according to DIN 24340 form A Porting pattern
RPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007
Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) 10/2010 Replaces 12/2007 4/3-, 4/2- way directional control valves with solenoid control Solenoids
For double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring
For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching
Type Modular Water Valve System servo-assisted; variable and extendable. 2/2 way; DN mm; 1 up to 7 bar Advantages / Benefits
2/2 way; DN 10-13 mm; 1 up to 7 bar Advantages / Benefits Reduction of Cost of Ownership up to 60% Modular system design Block assembly by lock technology Easy change between distributing and collecting
Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
Electric Drives. Linear Motion and Assembly Technologies Pneumatics Service. Valves, Series VP15. Technical data
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Valves, Series VP5 Technical data Completely mounted valve terminal system, BUSdirect (Profibus DP) Technical
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
AirLINE and AirLINE Quick electrical/pneumatic Automation System
AirLINE and AirLINE Quick electrical/pneumatic Automation System Type 8644 can be combined with Fully compatible with Rockwell Combination of Fieldbus, pilot valves and I/O modules higher fl exibility
Solenoid valve VDHT standard BSP (British Standard Pipe)
Technical data sheet standard BSP (British Standard Pipe) danfoss.high-pressurepumps.com 521B1166 / DKCFN.PD.043.A1.02 Index 3. Picture Overview 4. Features 5. Technical data 6. Technical data 7. General
Super X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated
> > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly
Miniature Valves MH1. Extremely small, fast and versatile. Info 206
Miniature Valves MH1 Extremely small, fast and versatile Info 206 MH1 Miniature Valves Benefits and Applications of the MH1 Miniature Valve The MH1 offers maximum reliability, even in constant operation
SECTIONAL DIRECTIONAL VALVE HDS 30 SERIES. CROSS HYDRAULICS PTY LTD YELLOW CATALOGUE Page 3.106
CROSS HYDRAULICS PY LD YELLOW CAALOGUE Page 3.106 Material specification: Standard features: Optional features available: Symbols: P A/B H.P.C.O. RV P 1 1 Weight CROSS HYDRAULICS PY LD YELLOW CAALOGUE
On-off Valves MS-EE, Inch Series Overview
On-off Valves MS-EE, Inch Series Overview Electrically actuated on-off valve for pressurising and exhausting pneumatic systems Choice of three voltage ranges 2 sizes: MS4 grid dimension.6 in, MS6 grid
599 Series Zone Valve Bodies:
599 Series Zone Bodies: Two-Way and Three-Way VE VV-1 Description Features The 599 Series two-way and three-way Zone s with a 1/10-inch (2.5 mm) stroke. Direct-coupled, universal bonnet Application Ordering
5 Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in. Standard Specifications. Fluid Operating pressure range
For details about certified products conforming to international standards, visit us at www.smcworld.com. Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in Series VFR2 JIS Symbol type