Solenoid/pneumatic valves, Tiger Classic
|
|
|
- Rodney Floyd
- 6 years ago
- Views:
Transcription
1 Solenoid/pneumatic valves, Tiger Classic Electrically or pneumatically actuated valves With internal or external pilot air Sturdy and reliable Specified types in accordance with ATEX directive for potentially explosive atmospheres 207/0 Subject to change Internet:
2 Solenoid/pneumatic valves, Tiger Classic Key features General information Highly durable poppet valve concept for all 3/2 and 5/2-way valves Pneumatic or electrical actuation with F solenoid coil With flow rates of up to 7500 l/min Pipe thread in sizes G/8, G/4, G/2 and G3/4 Tried and tested assembly on PAL or PRS manifold strips with hollow bolts Optimised response times with patented U-ring and servo control Solenoid coils F solenoid coils Voltage: 2 to 230 V DC 2 to 240 V AC (50 to 60 Hz) Power consumption: 4.5 W Selected types acc. to ATEX directive for explosive atmospheres Easily interchangeable solenoid coils Solenoid coil not included in scope of delivery Variants VL/O-3- MFH-3-, MOFH-3- MFH-3- -S Depending upon selected connections: Normally closed or normally open MFH-3- Normally closed MOFH-3- Normally open These valves can be converted from one function to the other by rotating the seal under the cover. This valve type can be used within a range of 0 to 8 bar and also as MOFH (through flow when not actuated) with a separate pilot line. MFH-5- -S The external pilot air connection means that these valves can also be used with low operating pressures. 2 Internet: Subject to change 207/0
3 Solenoid/pneumatic valves, Tiger Classic Key features Manifold mounting With PAL manifold strip With PRS manifold block The Tiger Classic valves can be mounted on PAL manifold strips with common supply port or on PRS manifold blocks with common supply port and common exhausts. The valves are mounted on the strips and blocks with hollow bolts. The manifold strip and manifold block have 2 to 6 valve positions. Vacant positions can be sealed on PAL manifold strips with blanking caps, or with blanking plates on PRS manifold blocks. Separate pressure levels can be provided to individual valves by means of hollow bolts with threaded connection. 207/0 Subject to change Internet: 3
4 Solenoid valves, Tiger Classic Product range overview Function Design Type Pneumatic connection Operating voltage [V DC] [V AC] 3/2-way valves Solenoid valve MFH G/8 2, 24, 42, 48 24, 42, 48, 0, 230, 240 G/4 G/2 G3/4 MOFH G/8 2, 24, 42, 48 24, 42, 48, 0, 230, 240 G/4 G/2 G3/4 Function Design Type Pneumatic connection Operating voltage [V DC] [V AC] 5/2-way valves Solenoid valve MFH G/8 2, 24, 42, 48 24, 42, 48, 0, 230, 240 G/4 G/2 Double solenoid valve JMFH G/8 2, 24, 42, 48 24, 42, 48, 0, 230, 240 G/4 G/2 Double solenoid valve with dominant signal JMFDH G/8 2, 24, 42, 48 24, 42, 48, 0, 230, 240 G/4 4 Internet: Subject to change 207/0
5 Solenoid valves, Tiger Classic Product range overview Type Normal position Pilot air supply Type of reset Page/Internet Closed Open Internal External Air spring Mechanical spring Solenoid valve MFH 2 MOFH 2 Type Pilot air supply Type of reset Page/Internet Internal External Air spring Mechanical spring Solenoid valve MFH 7 Double solenoid valve JMFH 22 Double solenoid valve with dominant signal JMFDH /0 Subject to change Internet: 5
6 Pneumatic valves, Tiger Classic Product range overview Function Design Type Pneumatic connection Type of reset Page/Internet Air spring Mechanical spring 3/2-way valves Pneumatic valve VL/O G/8 29 G/4 G/2 G3/4 5/2-way valves Pneumatic valve VL G/8 33 G/4 G/2 Double pilot valve JH G/8 36 G/4 G/2 Double pilot valve with dominant signal JDH G/8 36 G/4 6 Internet: Subject to change 207/0
7 Solenoid valves, Tiger Classic Type codes MFH 5 /8 Type MFH MOFH JMFH JMFDH Single solenoid, for F solenoid coil, normally closed Single solenoid, for F solenoid coil, normally open Double solenoid, for F solenoid coil Double solenoid, for F solenoid coil, with dominant signal Valve function 3 3/2-way valve 5 5/2-way valve Pneumatic connection /8 G/8 /4 G/4 /2 G/2 3/4 G3/4 Pilot air supply S Internal External 207/0 Subject to change Internet: 7
8 Solenoid valves, Tiger Classic Peripherals overview Mounting on manifold block ab ac aa ac ab 9 aa aj Variants MFH-5- JMFH-5-8 Internet: Subject to change 207/0
9 Solenoid valves, Tiger Classic Peripherals overview Accessories Push-in fitting QS 2 Blanking plug B 3 Manifold block PRS Brief description For connecting standard O.D. tubing Page/Internet quick star 3 included in the scope of delivery for PRS manifold block blanking plug 4 Silencer For fitting in exhaust ports u 42 5 Hollow bolt VT 6 Solenoid valve MFH 7 Double solenoid valve JMFH 8 F solenoid coil MSFG, MSFW 9 Luminescent seal M -LD aj Blanking plate PRSB aa Plug socket MSSD-F ab Plug socket with cable KMF ac Plug socket MSSD-F-S For distribution of compressed air or for separate compressed air supply 4 For F solenoid coil 4 For F solenoid coil 4 msfg, msfw For displaying the switching status 44 For covering an unused valve position 43 For valves MFH, JMFH 44 For valves MFH, JMFH 44 For valves MFH, JMFH /0 Subject to change Internet: 9
10 Solenoid valves, Tiger Classic Peripherals overview Mounting on manifold strip ac ab aa ac ab 9 aa 8 aj Variants MFH-5- JMFH-5-0 Internet: Subject to change 207/0
11 Solenoid valves, Tiger Classic Peripherals overview Accessories Push-in fitting QS 2 Blanking plug B 3 Manifold strip PAL Brief description For connecting standard O.D. tubing Page/Internet quick star included in the scope of delivery for PAL manifold strip blanking plug 4 Silencer For fitting in exhaust ports u 40 5 Hollow bolt VT 6 Solenoid valve MFH 7 Double solenoid valve JMFH 8 F solenoid coil MSFG, MSFW 9 Luminescent seal M -LD aj Blanking cap VTM aa Plug socket MSSD-F ab Plug socket with cable KMF ac Plug socket MSSD-F-S For distribution of compressed air or for separate compressed air supply 4 For F solenoid coil 4 For F solenoid coil 4 msfg, msfw For displaying the switching status 44 For blanking an unused valve position 4 For valves MFH, JMFH 44 For valves MFH, JMFH 44 For valves MFH, JMFH /0 Subject to change Internet:
12 Solenoid valves MFH, Tiger Classic Technical data 3/2-way valves -M- Flow rate l/min -P- Voltage 2, 24, 42, 48 V DC 24, 42, 48, 0, 230, 240 V AC Wearing parts kits 6 General technical data Pneumatic connection G/8 G/4 G/2 G3/4 Valve function 3/2-way, single solenoid Constructional design Poppet valve Sealing principle Soft Actuation type Electrical Type of reset Mechanical spring Type of control Piloted Pilot air supply Internal or external Direction of flow Non reversible (reversible for external pilot air supply) Exhaust function With flow control Manual override Detenting Type of mounting Via through holes Mounting position Any Nominal size [mm] Standard nominal flow rate [l/min] Product weight [g] Operating and environmental conditions Pneumatic connection G/8 G/4 G/2 G3/4 Operating medium Compressed air in accordance with ISO 8573 :200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure Internal pilot air supply [bar] External pilot air supply [bar] Pilot pressure [bar] 8 Ambient temperature [ C] Temperature of medium [ C] Note on materials RoHS-compliant Certification c CSA us (OL) c UL us - Recognized (HL) * 2 Internet: Subject to change 207/0
13 Solenoid valves MFH, Tiger Classic Technical data 3/2-way valves Minimal pilot pressure p2/p4 as a function of operating pressure p (external pilot air supply) MFH-3-/8-S MFH-3-/4-S p/p42 [bar] p/p42 [bar] p [bar] p [bar] MFH-3-/2-S MFH-3-3/4-S p2/p4 [bar] p2/p4 [bar] p [bar] p [bar] Valve response times [ms] Pneumatic connection G/8 G/4 G/2 G3/4 Normal position Closed Open Closed Open Closed Open Closed Open Internal pilot air supply On Off External pilot air supply On Off /0 Subject to change Internet: 3
14 Solenoid valves MFH, Tiger Classic Technical data 3/2-way valves Electrical data F solenoid coil Electrical connection Plug vanes for plug sockets MSSD-F, KMF Operating voltage D.C. voltage [V DC] 2, 24, 42, 48 A.C. voltage [V AC] 24, 42, 48, 0, 230, 240 (50 60 Hz) Coil characteristics D.C. voltage [W] 4.5 A.C. voltage [VA] Pull: 7.5 Hold: 6 Protection class to EN IP65 (in combination with plug socket) Materials Sectional view Housing Aluminium die-cast, anodised Seals Nitrile rubber 4 Internet: Subject to change 207/0
15 Solenoid valves MFH, Tiger Classic Technical data 3/2-way valves Dimensions MFH, MOFH Download CAD data Additional connection for external pilot air with MFH-3- -S 2 Solenoid coil is 360 rotatable 3 Manual override can be repositioned by 80 Pneumatic connection B B2 B3 B4 D D2 H H2 H3 H4 H5 H6 H7 L L2 G/ G/8 M G/ G/4 M G/ G/2 G/ G3/ G3/4 G/ Attachment diagram G/8 G/4 G/2 G3/4 207/0 Subject to change Internet: 5
16 Solenoid valves MFH, Tiger Classic Technical data 3/2-way valves Ordering data Circuit symbol Description Pneumatic connection Part No. Type Without F solenoid coil ), internal pilot air supply G/ MFH-3-/8 G/ MFH-3-/4 G/ MFH-3-/2 G3/4 967 MFH-3-3/4 Without F solenoid coil ), internal pilot air supply G/ MOFH-3-/8 G/ MOFH-3-/4 G/ MOFH-3-/2 G3/4 969 MOFH-3-3/4 Without F solenoid coil ), external pilot air supply G/ MFH-3-/8-S G/ MFH-3-/4-S G/ MFH-3-/2-S G3/4 968 MFH-3-3/4-S ) F solenoid coils 44 Ordering data Wearing parts kits Pneumatic connection Part No. Type G/ MFH-3-/8 G/ MFH-3-/4 G/ MFH-3-/2 6 Internet: Subject to change 207/0
17 Solenoid valves MFH, Tiger Classic Technical data 5/2-way valves -M- Flow rate l/min -P- Voltage 2, 24, 42, 48 V DC 24, 42, 48, 0, 230, 240 V AC Wearing parts kits 2 General technical data Pneumatic connection G/8 G/4 G/2 Valve function 5/2-way, single solenoid Constructional design Poppet valve Sealing principle Soft Actuation type Electrical Type of reset Mechanical spring Type of control Piloted Direction of flow Non reversible (reversible for external pilot air supply) Pilot air supply Internal or external Exhaust function With flow control Manual override Detenting Type of mounting Via through holes Mounting position Any Nominal size [mm] Standard nominal flow rate [l/min] Product weight [g] Operating and environmental conditions Pneumatic connection G/8 G/4 G/2 Operating medium Compressed air in accordance with ISO 8573 :200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure Internal pilot air supply [bar] External pilot air supply [bar] Pilot pressure [bar] Ambient temperature [ C] Temperature of medium [ C] Note on materials RoHS-compliant * 207/0 Subject to change Internet: 7
18 Solenoid valves MFH, Tiger Classic Technical data 5/2-way valves Minimal pilot pressure p2, p4 as a function of operating pressure p (external pilot air supply) MFH-5-/8-S MFH-5-/4-S p2/p4 [bar] 2 p2/p4 [bar] 2 Exhaust throttled Exhaust unthrottled p [bar] p [bar] Exhaust throttled Exhaust unthrottled MFH-5-/2-S p2/p4 [bar] 2 p [bar] Exhaust throttled Exhaust unthrottled Valve response times [ms] Pneumatic connection G/8 G/4 G/2 Pilot air supply Internal External Internal External Internal External On Off Internet: Subject to change 207/0
19 Solenoid valves MFH, Tiger Classic Technical data 5/2-way valves Electrical data F solenoid coil Electrical connection Plug vanes for plug sockets MSSD-F, KMF Operating voltage D.C. voltage [V DC] 2, 24, 42, 48 A.C. voltage [V AC] 24, 42, 48, 0, 230, 240 (50 60 Hz) Coil characteristics D.C. voltage [W] 4.5 A.C. voltage [VA] Pull: 7.5 Hold: 6 Protection class to EN IP65 (in combination with plug socket) Materials Sectional view Housing Aluminium die-cast, anodised Seals Nitrile rubber 207/0 Subject to change Internet: 9
20 Solenoid valves MFH, Tiger Classic Technical data 5/2-way valves Dimensions MFH Download CAD data Additional connection for external pilot air with MFH-5- -S 2 Solenoid coil is 360 rotatable 3 Manual override can be repositioned by 80 Pneumatic connection B B2 B3 B4 D D2 H H2 H3 H4 H5 H6 H7 L L2 G/ G/8 M G/ G/4 M G/ G/2 G/ Attachment diagram 20 Internet: Subject to change 207/0
21 Solenoid valves MFH, Tiger Classic Technical data 5/2-way valves Ordering data Circuit symbol Description Pneumatic connection Part No. Type Without F solenoid coil ), internal pilot air supply G/ MFH-5-/8 G/4 62 MFH-5-/4 G/ MFH-5-/2 Without F solenoid coil ), external pilot air supply G/ MFH-5-/8-S G/ MFH-5-/4-S G/ MFH-5-/2-S ) F solenoid coils 44 Ordering data Wearing parts kits Pneumatic connection Part No. Type G/ MFH-5-/8 )2) G/4 042 MFH-5-/4 3)4) ) Order mounting sleeves separately 2) Use up to E602 series 3) Order mounting sleeves separately 4) Use from /8 series 207/0 Subject to change Internet: 2
22 Double solenoid valves JMFH, Tiger Classic Technical data 5/2-way double solenoid valves -M- Flow rate l/min -P- Voltage 2, 24, 42, 48 V DC 24, 42, 48, 0, 230, 240 V AC Wearing parts kits 26 General technical data Pneumatic connection G/8 G/4 G/2 Valve function 5/2-way, double solenoid Constructional design Poppet valve Sealing principle Soft Actuation type Electrical Type of control Piloted Pilot air supply Internal or external Direction of flow Non reversible (reversible for external pilot air supply) Exhaust function With flow control Manual override Detenting Type of mounting Via through holes Mounting position Any Nominal size [mm] Standard nominal flow rate Internal pilot air supply [l/min] External pilot air supply [l/min] Product weight [g] Operating and environmental conditions Pneumatic connection G/8 G/4 G/2 Operating medium Compressed air in accordance with ISO 8573 :200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure Internal pilot air supply [bar] External pilot air supply [bar] With dominant signal [bar] Pilot pressure [bar] Ambient temperature [ C] Temperature of medium [ C] Note on materials RoHS-compliant * 22 Internet: Subject to change 207/0
23 Double solenoid valves JMFH, Tiger Classic Technical data 5/2-way double solenoid valves Minimal pilot pressure p2, p4 as a function of operating pressure p (external pilot air supply) JMFH-5-/8-S JMFH-5-/4-S p2/p4 [bar] 2 p2/p4 [bar] 2 Exhaust throttled Exhaust unthrottled p [bar] p [bar] Exhaust throttled Exhaust unthrottled JMFH-5-/2-S p2/p4 [bar] p [bar] Valve response times [ms] Pneumatic connection G/8 G/4 G/2 Dominating signal at 4 Dominating signal at 4 Internal pilot air supply On/changeover 6 24 Off/changeover External pilot air supply On/changeover Off/changeover /0 Subject to change Internet: 23
24 Double solenoid valves JMFH, Tiger Classic Technical data 5/2-way double solenoid valves Electrical data F solenoid coil Electrical connection Plug vanes for plug sockets MSSD-F, KMF Operating voltage D.C. voltage [V DC] 2, 24, 42, 48 A.C. voltage [V AC] 24, 42, 48, 0, 230, 240 (50 60 Hz) Coil characteristics D.C. voltage [W] 4.5 A.C. voltage [VA] Pull: 7.5 Hold: 6 Protection class to EN IP65 (in combination with plug socket) Materials Sectional view Housing Aluminium die-cast, anodised Seals Nitrile rubber 24 Internet: Subject to change 207/0
25 Double solenoid valves JMFH, Tiger Classic Technical data 5/2-way double solenoid valves Dimensions JMFH, JMFDH Download CAD data Additional connection for external pilot air with JMF H-5- -S 2 Solenoid coil is 360 rotatable 3 Manual override can be repositioned by 80 Pneumatic connection B B2 B3 B4 D D2 H H2 H4 H6 H7 L L2 G/ G/8 M G/ G/4 M G/ G/2 G/ Attachment diagram 207/0 Subject to change Internet: 25
26 Double solenoid valves JMFH, Tiger Classic Technical data 5/2-way double solenoid valves Ordering data Circuit symbol Description Pneumatic connection Part No. Type Without F solenoid coil ), internal pilot air supply G/ JMFH-5-/8 G/4 040 JMFH-5-/4 G/2 066 JMFH-5-/2 Without F solenoid coil ), external pilot air supply G/ JMFH-5-/8-S G/ JMFH-5-/4-S G/ JMFH-5-/2-S Without F solenoid coil ), internal pilot air supply, with dominating signal at 4 G/8 882 JMFDH-5-/8 G/4 04 JMFDH-5-/4 ) F solenoid coils 44 Ordering data Wearing parts kits Pneumatic connection Part No. Type G/ JMFH-5-/8 ) G/ JMFH-5-/4 2) ) Order mounting sleeves separately 2) Order mounting sleeves separately 26 Internet: Subject to change 207/0
27 Pneumatic valves, Tiger Classic Type codes VL/O 3 /4 Type VL/O VL JH JMFDH Single pilot, normally open or closed Single pilot Double pilot Double pilot, dominant Valve function 3 3/2-way valve 5 5/2-way valve Pneumatic connection /8 G/8 /4 G/4 /2 G/2 3/4 G3/4 Generation B Series B 207/0 Subject to change Internet: 27
28 Pneumatic valves, Tiger Classic Peripherals overview Mounting on manifold block Mounting on manifold strip Accessories Push-in fitting QS 2 Blanking plug B 3 Manifold block PRS 4 Manifold strip PAL Brief description For connecting standard O.D. tubing 3 included in the scope of delivery for PRS manifold block included in the scope of delivery for PAL manifold strip 5 Silencer For fitting in exhaust ports u Page/Internet quick star blanking plug Pneumatic valve VL, JH 7 Blanking plate PRSB 8 Blanking cap VTM 9 Hollow bolt VT vl, jh For covering an unused valve position 43 For blanking an unused valve position 4 For distribution of compressed air or for separate compressed air supply 4 28 Internet: Subject to change 207/0
29 Pneumatic valves VL/O, Tiger Classic Technical data 3/2-way valves -M- Flow rate l/min Wearing parts kits 32 General technical data Pneumatic connection G/8 G/4 G/2 G3/4 Valve function 3/2-way, single pilot Constructional design Poppet valve Sealing principle Soft Actuation type Pneumatic Type of reset Mechanical spring Type of pilot control Direct Direction of flow Reversible Exhaust function With flow control Manual override None Type of mounting Via through holes Mounting position Any Nominal size [mm] Standard nominal flow rate [l/min] Product weight [g] Operating and environmental conditions Pneumatic connection G/8 G/4 G/2 G3/4 Operating medium Compressed air in accordance with ISO 8573 :200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure Normally closed [bar] Normally open [bar] Pilot pressure See diagram (max. 0 bar) Ambient temperature [ C] Note on materials RoHS-compliant * 207/0 Subject to change Internet: 29
30 Pneumatic valves VL/O, Tiger Classic Technical data 3/2-way valves Minimal pilot pressure p2/p4 as a function of operating pressure p VL/O-3-/8-B p2/p4 [bar] p [bar] Switch-on pressure 2 Switch-off pressure 3 Only for normally closed VL/O-3-/4 Normally closed VL/O-3-/4 Normally open p2/p4 [bar] p2/p4 [bar] Switch-on pressure 2 Switch-off pressure p [bar] Switch-on pressure 2 Switch-off pressure p [bar] VL/O-3-/2 Normally closed VL/O-3-/2 Normally open p2/p4 [bar] p2/p4 [bar] Switch-on pressure 2 Switch-off pressure p [bar] Switch-on pressure 2 Switch-off pressure p [bar] 30 Internet: Subject to change 207/0
31 Pneumatic valves VL/O, Tiger Classic Technical data 3/2-way valves VL/O-3-3/4 Normally closed VL/O-3-3/4 Normally open p2/p4 [bar] p2/p4 [bar] Exhaust throttled Exhaust unthrottled p [bar] Exhaust throttled Exhaust unthrottled p [bar] Valve response times [ms] Pneumatic connection G/8 G/4 G/2 G3/4 On Off Materials Sectional view Housing Aluminium die-cast, anodised Seals Nitrile rubber 207/0 Subject to change Internet: 3
32 Pneumatic valves VL/O, Tiger Classic Technical data 3/2-way valves Dimensions VL/O Download CAD data Pneumatic connection B B5 D3 H8 H9 L G/ G/ G/ G/ G/2 52 G/ G3/4 68 G/ Attachment diagram G/8 G/4 G/2 G3/4 Ordering data Circuit symbol Description Pneumatic connection Part No. Type Mechanical reset, optionally normally open or closed G/ VL/O-3-/8-B G/ VL/O-3-/4 G/ VL/O-3-/2 G3/ VL/O-3-3/4 Ordering data Wearing parts kits Pneumatic connection Part No. Type G/ VL/O-3-/8-B G/ VL/O-3-/4 G/ VL/O-3-/2 32 Internet: Subject to change 207/0
33 Pneumatic valves VL, Tiger Classic Technical data 5/2-way valves -M- Flow rate l/min Wearing parts kits 35 General technical data Pneumatic connection G/8 G/4 G/2 Valve function 5/2-way, single pilot Constructional design Poppet valve Sealing principle Soft Actuation type Pneumatic Type of reset Mechanical spring Type of pilot control Direct Direction of flow Non reversible Manual override None Exhaust function With flow control Type of mounting Via through holes Mounting position Any Nominal size [mm] Standard nominal flow rate [l/min] Product weight [g] Operating and environmental conditions Pneumatic connection G/8 G/4 G/2 Operating medium Compressed air in accordance with ISO 8573 :200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [bar] Pilot pressure [bar] See diagram (max. 0 bar) Ambient temperature [ C] Note on materials RoHS-compliant * 207/0 Subject to change Internet: 33
34 Pneumatic valves VL, Tiger Classic Technical data 5/2-way valves Minimal pilot pressure p2/p4 as a function of operating pressure p VL-5-/8 VL-5-/4 p2/p4 [bar] 2 p2/p4 [bar] p [bar] p [bar] Exhaust throttled Exhaust unthrottled VL-5-/2 p2/4 [bar] p [bar] Valve response times [ms] Pneumatic connection G/8 G/4 G/2 On Off Materials Sectional view Housing Aluminium die-cast, anodised Seals Nitrile rubber 34 Internet: Subject to change 207/0
35 Pneumatic valves VL, Tiger Classic Technical data 5/2-way valves Dimensions VL Download CAD data Pneumatic connection B B5 D3 H8 H9 L G/ G/ G/ G/ G/2 52 G/ Attachment diagram Ordering data Circuit symbol Description Pneumatic connection Part No. Type Mechanical reset G/ VL-5-/8 G/4 999 VL-5-/4 G/ VL-5-/2 Ordering data Wearing parts kits Pneumatic connection Part No. Type G/ VL-5-/8 ) G/4 042 VL-5-/4 2)3) G/ VL-5-/2 ) Order mounting sleeves separately 2) Order mounting sleeves separately 3) Use from /8 series 207/0 Subject to change Internet: 35
36 Pneumatic valves JH, Tiger Classic Technical data 5/2-way valves, double pilot valves -M- Flow rate l/min Wearing parts kits 39 General technical data Pneumatic connection G/8 G/4 G/2 Valve function 5/2-way, double pilot Constructional design Poppet valve Sealing principle Soft Actuation type Pneumatic Type of pilot control Direct Direction of flow Non reversible Exhaust function With flow control Manual override Resetting Type of mounting Via through holes Mounting position Any Nominal size [mm] Standard nominal flow rate [l/min] Product weight [g] Operating and environmental conditions Pneumatic connection G/8 G/4 G/2 Operating medium Compressed air in accordance with ISO 8573 :200 [7:4:4] Note on operating/pilot medium Operation with lubricated medium possible (in which case lubricated operation will always be required) Operating pressure [bar] Pilot pressure [bar] See diagram (max. 0 bar) Ambient temperature [ C] Note on materials RoHS-compliant * 36 Internet: Subject to change 207/0
37 Pneumatic valves JH, Tiger Classic Technical data 5/2-way valves, double pilot valves Minimal pilot pressure p2/p4 as a function of operating pressure p JH-5-/8 JDH-5-/8 p2/p4 [bar] 2 p2/p4 [bar] Exhaust throttled Exhaust unthrottled p [bar] Exhaust throttled Exhaust unthrottled p [bar] JH-5-/4 JDH-5-/4 p2/p4 [bar] p2/p4 [bar] p [bar] Exhaust throttled Exhaust unthrottled p [bar] Exhaust throttled Exhaust unthrottled JH-5-/2 p2/p4 [bar] p [bar] Valve response times [ms] Pneumatic connection G/8 G/4 G/2 Dominating signal at 4 Dominating signal at 4 On/changeover 9 7 Off/changeover /0 Subject to change Internet: 37
38 Pneumatic valves JH, Tiger Classic Technical data 5/2-way valves, double pilot valves Materials Sectional view Housing Aluminium die-cast, anodised Seals Nitrile rubber Dimensions JH, JDH Download CAD data 4 Cover can be repositioned by 80 5 Manual override Pneumatic connection B B5 D3 D4 H8 H9 H0 L G/ G/ G/ G/ G/2 52 G/ Internet: Subject to change 207/0
39 Pneumatic valves JH, Tiger Classic Technical data 5/2-way valves, double pilot valves Attachment diagram Ordering data Circuit symbol Description Pneumatic connection Part No. Type G/ JH-5-/8 G/ JH-5-/4 G/2 065 JH-5-/2 With dominating signal at 4 G/ JDH-5-/8 G/ JDH-5-/4 Ordering data Wearing parts kits Pneumatic connection Part No. Type G/ JH-5-/8 ) G/ JH-5-/4 2) ) Order mounting sleeves separately 2) Order mounting sleeves separately 207/0 Subject to change Internet: 39
40 Solenoid/pneumatic valves, Tiger Classic Accessories Manifold strip PAL Materials: Manifold: Anodised aluminium Mounting bracket: Galvanised steel Dimensions and ordering data Type B B2 B3 B4 B5 D D3 D4 H H2 H3 L5 L6 L7 L8 ß ß 2 PAL-/ G/8 G/ PAL-/ G/4 G3/ PAL-/ G/2 G3/ Number of valve ports L L2 L3 L4 Weight Part No. Type [g] Pneumatic connection G/ PAL-/ PAL-/ PAL-/ PAL-/ PAL-/8-6 Pneumatic connection G/4 ) PAL-5-/ PAL-5-/ PAL-5-/ PAL-5-/ PAL-5-/4-6 Pneumatic connection G/ PAL-/ PAL-/ PAL-/ PAL-/ PAL-/2-6 ) MOFH-3-/4 is not suitable for manifold mounting 40 Internet: Subject to change 207/0
41 Solenoid/pneumatic valves, Tiger Classic Accessories Hollow bolt VT For manifold strip PAL Material: Anodised aluminium Ordering data Pneumatic connection Weight Part No. Type [g] G/ VT-/8 G/ VT-/8- )2) G/ VT-/4-2 G/ VT-/2 ) For valves with G/8 connection 2) Sealing rings included in scope of delivery Blanking cap VTM For sealing vacant valve positions Material: Wrought aluminium alloy Ordering data Pneumatic connection Weight Part No. Type [g] G/ VTM-/8 G/ VTM-/8 ) G/ VTM-/4 G/ VTM-/2 ) For valves with G/8 connection 207/0 Subject to change Internet: 4
42 Solenoid/pneumatic valves, Tiger Classic Accessories Manifold block PRS Material: Anodised aluminium Dimensions and ordering data Type B B2 B3 B4 D D2 D3 H H2 H3 H4 L3 L4 L5 L6 L7 L8 ß ß 2 PRS-/ G/8 G3/ PRS-/ G/4 G/ Number of valve ports L L2 Weight Part No. Type [g] Pneumatic connection G/ PRS-/ PRS-/ PRS-/ PRS-/ PRS-/8-6 Pneumatic connection G/ PRS-/ PRS-/ PRS-/ PRS-/ PRS-/4-6 Hollow bolt VT For manifold block PRS Material: Anodised aluminium Ordering data Pneumatic connection Weight Part No. Type [g] G/ VT-/8-PRSK G/ VT-/4-PRS 42 Internet: Subject to change 207/0
43 Solenoid/pneumatic valves, Tiger Classic Accessories Blanking plate PRSB For sealing vacant valve positions Material: Aluminium Ordering data Pneumatic connection Weight Part No. Type [g] G/ PRSB-/8 G/ PRSB-/4 Hollow bolt VT For separate compressed air supply on valve Material: Anodised aluminium Ordering data Pneumatic connection Weight Part No. Type [g] G/ VT-/8-AJK-P G/ VT-/8-AJS-P ) G/ VT-/4-AJ-P ) For valves with G/8 connection 207/0 Subject to change Internet: 43
44 Solenoid/pneumatic valves, Tiger Classic Accessories Ordering data Solenoid coils Technical data Internet: msfg, msfw Voltage Part No. Type F solenoid coils 2 V DC 3440 MSFG-2-OD 24 V DC and 42 V AC, Hz 344 MSFG-24/42-50/60-OD 42 V DC 3443 MSFG-42-OD 24 V AC 3445 MSFW-24-50/60-OD 48 V AC, Hz 3448 MSFW-48-50/60-OD 0 V AC, Hz and 20 V AC, 60 Hz MSFW-0-50/60-OD 230 V AC, Hz and 240 V AC, 60 Hz MSFW /60-OD 240 V AC, Hz MSFW /60-OD Ordering data Plug sockets/plug sockets with cable for F solenoid coils Voltage Cable length LED Part No. Type [m] Plug socket without cable Technical data Internet: mssd 3443 MSSD-F MSSD-F-M6 Plug socket without cable with insulation displacement technology MSSD-F-S-M6 Plug socket with cable Technical data Internet: kmf 24 V DC KMF--24DC-2,5-LED KMF--24DC-5-LED KMF--24DC-0-LED Up to 240 V KMF--230AC-2, KMF--230AC-5 Ordering data Illuminating seal Technical data Internet: mf-ld Voltage Part No. Type For F solenoid coils 2 24 V DC 943 MF-LD-2-24DC 230 V DC/V AC 944 MF-LD-230AC Ordering data Plate Description Pneumatic connection Part No. Type For wide solenoid coils As spacer when using wider solenoid coils from other manufacturers (thickness: 6.35 mm) For 3/2-way valves G/ MPL-TC-3-8 G/ MPL-TC-3-4 For 5/2-way valves G/ MPL-TC-5-8 G/ MPL-TC Internet: Subject to change 207/0
Solenoid valves MFHE/Pneumatic valves VLHE
Solenoid valves MFHE/Pneumatic valves VLHE Solenoid valves MFHE/Pneumatic valves VLHE Peripherals overview 2 1 4 3 5 Accessories MFHE VLHE Page/Internet 1 Solenoid coil MSFG/MSFW 8 2 Plug socket with cable
V New VSVA. Solenoid/pneumatic valves, ISO Electrically or pneumatically actuated valves. With internal or external pilot air
V New VSVA B01_01_001_E Solenoid/pneumatic valves, ISO 15 407 1 Electrically or pneumatically actuated valves With internal or external pilot air Pneumatic or mechanical reset Ausgewählte Typen nach ATEX
Solenoid valves VUVS/valve manifold VTUS, NPT
Solenoid valves VUVS/valve manifold VTUS, NPT -V- New VUVS-LT25, VTUS-25 Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty
Pneumatic valves VUWS/valve manifold VTUS
Pneumatic valves VUWS/valve manifold VTUS -V- New VUWS-LT25, VTUS-25 Pneumatic valves VUWS/valve manifold VTUS Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with
Pneumatic valves VUWS/valve manifold VTUS
Pneumatic valves VUWS/valve manifold VTUS -V- New VUWS-LT25, VTUS-25 Pneumatic valves VUWS/valve manifold VTUS Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with
Standard valves to ISO Product range overview
Standard valves to ISO 15218 Product range overview Function Electrical connection Voltage Manual override Page/Internet Pilot valve to ISO 15218 Width 15 mm Plug connector type C, to EN 175301-803 Plug
Solenoid valves MH2/MH3/MH4, fast-switching valves
Solenoid valves MH2/MH3/MH4, fast-switching valves Fast-switching valves from Festo: it's not just the switching that's fast The fast-switching professionals with response times down to 2 milliseconds
Solenoid/pneumatic valves, ISO
Solenoid/pneumatic valves, ISO 15407-1 q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
-M- Flow rate 100 l/min. M5 Compact System Key features
M5 Compact System Key features -M- Flow rate 100 l/min Forms the basis for compact pneumatic control systems M5 elements with 2n sub-bases Control cabinet installation Easy mounting Fast replacement of
Solenoid valves VUVS/valve manifold VTUS, NPT
Solenoid valves VUVS/valve manifold VTUS, NPT Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty valve with a long service life
Solenoid valves VZWP, servo-controlled
Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure
Solenoid valves MH2/MH3/MH4, fast-switching valves
Solenoid valves MH2/MH3/MH4, fast-switching valves Fast-switching valves from Festo: it's not just the switching that's fast The fast-switching professionals with response times down to 2 milliseconds
Solenoid valves VUVB/valve terminals VTUB, NPT
Solenoid valves VUVB/valve terminals VTUB, NPT Solenoid valves VUVB/valve terminals VTUB, NPT Key features Innovative Versatile Reliable Easy to mount Valve terminal for a wide range of pneumatic applications
-V- New. Valve series VOFC. 2009/08 Subject to change Internet:
Valve series VOFC 2009/08 Subject to change Internet: www.festo.com/catalogue/... 159 Solenoid valves VOFC Key features General information The valves in the VOFC series are special 3/2-way and 5/2-way
Solenoid valves MHJ, fast-switching valves
Solenoid valves MHJ, fast-switching valves Solenoid valves MHJ, fast-switching valves Key features Innovative Versatile Reliable Easy to install Individual electrical connection via connecting cable and
Solenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
Control block VOFA with safety function
Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,
Solenoid valves VMPA
Key features Innovative Versatile Reliable Easy to mount Slim high-performance valves in a sturdy metal housing MPA1 (width 10 mm): flow rate up to 360 l/min MPA14 (width 14 mm): flow rate up to 670 l/min
Solenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Solenoid valves VUVB/valve terminals VTUB
Solenoid valves VUVB/valve terminals VTUB Solenoid valves VUVB/valve terminals VTUB Key features Innovative Versatile Reliable Easy to mount Valve terminal for a wide range of pneumatic applications Standardised
Solenoid valves VZWM-L
Key features and type codes Brief description Indirectly controlled poppet valve with diaphragm control Connection, valve G¼ G2 Flow rate 1,400 31,000 l/min Available in brass or stainless steel casting
Solenoid valves VUVG/valve terminals VTUG
Solenoid valves VUVG/valve terminals VTUG q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
MFH MOFH JMFH JMFDH NVF3 MUFH VOFD VOFC VSNC VUVS
Solenoid coils Solenoid coils Product range overview Version Type For valve series Page/ Internet MFH MOFH JMFH JMFDH NVF3 MUFH VOFD VOFC VSNC VUVS F solenoid coil MSF VACF 3 N solenoid coil VACN-N 6 N
Flow control valves GRO, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal Flow control function connection 2 connection 1 qnn 1) [l/min]
Proportional pressure regulators MPPES
Product range overview Function Type Circuit symbol Design Pneumatic connection 1 Proportional pressure regulators With proportional solenoid MPPES Directly actuated valve Nominal size pressurise/ exhaust
Quarter turn actuators DFPB
Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn
On-off/soft-start valves HE/HEE/HEP/HEL, D series
On-off/soft-start valves HE/HEE/HEP/HEL, D series On-off/soft-start valves HE/HEE/HEP/HEL, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic connection
Front panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent P Pushbuttons return
-H- Note. Sub-bases VABP Key features
Key features At a glance The sub-base VABP can be used to help realise specific switch-off behaviour when switching off the valve load voltage. It is a single-channel solution for uncoupling the drive
Solenoid valves VUVG/valve terminals VTUG
Solenoid valves VUVG/valve terminals VTUG q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
Quarter turn actuators DFPB
Quarter turn actuators DFPB Quarter turn actuators DFPB Key features General The DFPB quarter turn actuator is a rack and pinion combination that converts the linear movement of the shaft. Quarter turn
Solenoid valves VOVG Product range overview
Valve series VOVG Product range overview Function Symbol Version Normally Voltage [V DC] Page/ open closed 5 12 2 Internet /2-way valve In-line valve 8/vovg Semi in-line valve Sub-base valve 5/2-way valve
On-off/soft-start valves HE/HEE/HEP/HEL, D series
On-off/soft-start valves HE/HEE/HEP/HEL, D series On-off/soft-start valves HE/HEE/HEP/HEL, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic connection
Solenoid coils. Festo core product range Covers 80% of your automation tasks
Solenoid coils q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Reverse jet pulse valves VZWE, solenoid actuated
Key features and product range overview Function Reverse jet pulse valves VZWE are piloted 2/2-way valves. They generate pulses of compressed air using a suitable solenoid coil for mechanically cleaning
Pneumatic components for high-pressure applications
Pneumatic components for high-pressure applications Pneumatic components for high-pressure applications, series L Product range overview Function Version Type Size Pneumatic connection 1, 2 Page Direct
Check valves H/HA/HB/HGL
Check valves H/HA/HB/HGL q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
On-off Valves MS-EE, Inch Series Overview
On-off Valves MS-EE, Inch Series Overview Electrically actuated on-off valve for pressurising and exhausting pneumatic systems Choice of three voltage ranges 2 sizes: MS4 grid dimension.6 in, MS6 grid
Quarter turn actuators DFPD
Quarter turn actuators DFPD Quarter turn actuators DFPD Key features Function The DFPD series features a rack and pinion combination with a constant torque characteristic across the entire swivel range.
One-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
Front panel valves SV
Front panel valves SV Key features T N H Q P PR PRS SVS-3-1/8 SVOS-3-1/8 SV-3-M5 SV-5-M5-B SV/O-3-PK-3X2 Actuator attachments Pushbutton T Switch N, H, Q Mushroom pushbutton/mushroom pushbutton with detent
Proportional directional control valves MPYE
Key features General information The directly actuated proportional directional control valve has a position-controlled spool. This transforms an analogue input signal into a corresponding opening cross-section
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Semi-rotary drives DRVS
Key features Key features at a glance Double-acting semi-rotary drive with rotary vanes Lighter than other semi-rotary drives Modern and compact design Fixed swivel angle Swivel angle can be adjusted with
Vacuum generators Key features
Vacuum generators Vacuum generators Key features Product overview Vacuum generator All Festo vacuum generators have a single-stage design and operate according to the venturi principle. The product families
Quarter turn actuators DFPD
Quarter turn actuators DFPD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
Proportional pressure regulators VPPX
Features LED indicators Plug socket with cable Venting at both ends Manifold block Sub-base valve Angle bracket Individual valve H-rail mounting repositionable by 180 Compressed air supply at both ends
Quick availability: selected products from the VUVS series
New: focused features at an attractive price Quick availability: selected products from the VUVS series -...-S/ pneumatic valves VUWS Configurable valve VUVS Configurable valve manifold VTUS Ready-to-install
-H- Note. Silencers Product range overview. Version Type Connection D1 Push-in connector. For tubing I.D. Push-in sleeve diameter.
Silencers Silencers Product range overview Version Type Connection Push-in connector Sintered metal For tubing I.D. Push-in sleeve diameter Noise level M thread G thread NPT thread [db (A)] U-PK-3 3 70
Threaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series
Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade
Linear actuators DFPI
Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator
Feed separators HPVS
Key features and peripherals overview At a glance 1 Corrosion-resistant thanks to stainless steel plunger 2 Optimum and precise adaption options using centring sleeves 3 Supply ports optionally on top
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F Metric Series Overview
Overview Modular multi-functional valve manifold for up to 3 valves: Type 44 VTSA, ISO 15407-/ISO 5599- Type 45 VTSA-F with optimized flow Different valve sizes on one valve manifold: 18 mm (ISO 0) 6 mm
Branching modules FRM/Distributor blocks FRZ, D series
Branching modules FRM/Distributor blocks FRZ, D series Branching modules FRM/Distributor blocks FRZ, D series, metal design Product range overview D series service units, metal design Type Size Pneumatic
Semi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
Valve terminals CPV-SC, Smart Cubic
Key features Innovative Versatile Reliable Easy to mount Small, compact valve terminal for a wide range of pneumatic applications Enormous flexibility during planning, assembly and operational use Multi-pin
On-off/soft-start valves MS-EM/EE/DL/DE, MS series
On-off/soft-start valves MS-EM/EE/DL/DE, MS series q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces
Silencers. Festo core product range Covers 80% of your automation tasks
Silencers q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready
-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
On-off valves MS-EM/EE, MS series, NPT
On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12
Quickstepper FSS Key features
Key features Description Pneumatic/mechanical sequencer with 12 steps and start logic circuits Ready-to-install sequence controller Acknowledgement-controlled motion sequences The Quickstepper is a mini
Positioners CMSX. Festo core product range Covers 80% of your automation tasks
Positioners CMSX q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Parallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
Hinge cylinders DW Key features
Key features At a glance Hinge cylinder for clamping components during the welding process Easy assembly thanks to swivel bearing on the bearing cap Integrated flow control Integrated end-position cushioning
Threaded fittings. Festo core product range Covers 80% of your automation tasks
Threaded fittings q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Swivel modules DSM/DSM-B
Swivel modules DSM/DSM-B Swivel modules DSM/DSM-B Key features At a glance Double-acting swivel module with rotary vanes The swivel angle is infinitely adjustable over the entire swivel range High precision
Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series
Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces
Short-stroke cylinders ADVC/AEVC
Short-stroke cylinders ADVC/AEVC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing
Twin-piston semi-rotary drives DRRD
Twin-piston semi-rotary drives DRRD Twin-piston semi-rotary drives DRRD Key features At a glance Rack and pinion principle Very high accuracy in the end positions Very high bearing load capacity Very good
-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
Solenoid valves VZWF, force pilot operated
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Twin-piston semi-rotary drives DRRD
Twin-piston semi-rotary drives DRRD q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and
Hinge cylinders DFAW
Key features At a glance Hinge cylinder for clamping components during the welding process Sintered bronze bushes as lowfriction bearing material on rod clevis and swivel bearing Clamping unit: With piston
Pressure and vacuum switches PEV/VPEV
Pressure and vacuum switches PEV/VPEV Pressure and vacuum switches PEV/VPEV Product range overview Function Design Type Operating pressure Pneumatic connection Mechanical pressure switches Electrical connection
Semi-rotary drives DSR/DSRL
Wide variety of mounting options Infinitely adjustable swivel angle Comprehensive range of accessories 2017/10 Subject to change Internet: www.festo.com/catalog/... 1 Features Brief description In these
Slide units SPZ, twin piston
Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com
Vacuum generators OVEM
Key features At a glance Accelerated vacuum reduction for safe placement of the workpiece by means of integrated solenoid valve for controlling the ejector pulse Central electrical connection via M12 plug
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
On-off/soft-start valves MS-EM/EE/DL/DE, MS series
On-off/soft-start valves MS-EM/EE/DL/DE, MS series q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces
-H- Note. Clip fix tool AGTC Key features
Key features At a glance Principle The clip fix tool AGTC is a pneumatic mounting device for clips of different designs. Pressing the clip fix tool with attached clip adapter 1) and clip against the chosen
Pneumatic control systems
6.0 Control units M5 Compact System 2003/10 Subject to change Products 2004/2005 4 / 6.0 1 Quickstepper and Commander FSS/FSSC Key features Controller units 6.1 Quickstepper Commander Command module for
Sensor boxes SRBE Key features and product range overview
Sensor boxes SRBE Sensor boxes SRBE Key features and product range overview Function Sensor boxes SRBE are used for electrical feedback and control of the position of process valves actuated using pneumatic
Standard cylinders DNG/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to
Lubricators MS-LOE, MS series
Lubricators MS-LOE, MS series Lubricators MS-LOE, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade of filtration [μm] Pneumatic connection in housing
Solenoid coils VACF Type codes
Solenoid coils VACF Type codes VACF B B2 1A Type VACF Solenoid coil, F series Solenoid coil type A B Width 30 mm, for 8 mm armature tube Width 22 mm, for 8 mm armature tube A1 Connection pattern type A,
One-way flow control valves GR/GRA, in-line installation
Product range overview and type codes Product range overview Version Valve function Version Type Connection direction In-line installation Metal One-way flow control function Pneumatic connection 1 GR/GRA
Proportional directional control valves MPYE
High dynamics Final control element for closed control loops 5/3 way function 2003/10 Subject to change Products 2004/2005 5 / 1 Key features General information The directly actuated proportional directional
Radial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
Linear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
Mini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
Guided drives DFM/DFM-B
Guided drives DFM/DFM-B q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
Radial grippers DHRS
Key features At a glance General information Flexible range of applications Lateral gripper jaw support for high torque loads Self-centring Gripper jaw centring options Max. repetition accuracy Gripping
Filter regulators MS-LFR, MS series
Filter regulators MS-LFR, MS series Filter regulators MS-LFR, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade of filtration [μm] Pneumatic connection
Linear actuators DLP, Copac
Key features and type codes General -N- Diameter 80... 320 mm -T- Stroke length 40... 600 mm, additional stroke lengths upon request -O- Force 2800... 48000 N Festo Copac linear valve actuators are ideally
Lubricators LOE, D series
Lubricators LOE, D series Product range overview D series service units, metal design Type Size Pneumatic connection Pressure regulation range [bar] Grade of filtration [μm] M5 M7 Gx G¼ Gy G½ G¾ G QS4
-U- Type discontinued
Key features At a glance -V- New Sturdier Optimised end stop system Optimised intermediate position module Minimised susceptibility to wear One-way flow control valves that can be externally adjusted Integrated
Proportional directional control valves MPYE
Key features General information The directly actuated proportional directional control valve has a position-controlled spool. This transforms an analogue input signal into a corresponding opening cross-section
-H- Note. Pinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.