Miniature electropilots U2

Transcription

1 Direct intervention electropilots with poppet valve system and bottom cushioned ssembly on subbase Threaded connections on the body CNOMO interface Orientable coil (360 ) separated from mechanical part Versions: 2/2 3/2 NC NO Original Univer SPEED modular subbase TECHNICL CHRCTERISTICS mbient temperature Fluid temperature Fluid Coutation system Ways/Positions Pressure Control Return Connections Nominal Ø () Nominal flow rate (Nl/min) C max +95 C filtered air 10 μm, lubricated or not (upon request other fluids can be used) direct intervention poppet valve system with cushioned,, (a) 2/2, = 0 10 = 3 10 electric mechanical spring on subbase or with threaded connections on the body subbase G 1/8 M5 CNOMO 1, CONSTRUCTIVE CHRCTERISTICS Materials ELECTRIC CHRCTERISTICS see features below Electropilots Series Coil Power consumption Connector Voltage DB 11W (DC) 10 V (C) M V DC 24 V DC 24 V C 110 V C 230 V C For other electric features see section ccessories>coils (a) = Mechanical part designed to keep the air supply always from the body (Useful in case of assembly of more NCNO pilots in series to have a unique supply port) 1_15

2 Sleeves with moving core (a) Exhaust Ø Pressure bar 3 10 cores and springs Weight Kg 0,060 0,060 0,060 0, Upon request viton and s (only NC options) NC NO Detail of machining Wrench 22 Locking rings for coils on s Version 1 = radial exhausts 2 = radial exhausts 3 = open exhausts Suitable for s Material technopolymer technopolymer brass Coil M5212 M5214 M5212B In order to convey exhausts, use version 3 Standard manual s with electropilots Functionig 1 = with 2 position screw 2 = with impulse 12 position screw 3 = with button with tool 4 = with button, 1 position Suitable for s all NC electropilots that can use manual only CNOMO NC electropilots only CNOMO NC electropilots NO 3/2 electropilots / M5203(b) (a) = Suitable for subbases with diameter from 3 6 (b) = Mounted on the = with 2 position screw = with button with tool 1_16

3 2/2 3/2 Electropilot for assembling on subbase zamak 0, En. Deen B (e) B ISO = Exhaust Subbase: SPEED. vailable upon request: other inner diameters. 2/2 3/2 G1/8 Electropilot zamak 0,145 Electropilots En. Deen vailable upon request: other inner diameters. (e) = Exhaust = close the exhaust of the electropilot to get the 2/2 NO one. (d) = the Ø shown on the 3/2 valves refers to the exhhaust. (e) = manual on M5203 ring nut Electropiltots are supplied without coil, connector and locking ring = with 2 position screw. 1_17

4 3/2 G1/4 Electropilot brass\ 0, Ecc. Dis (e) 0819 Suitable for use with nonaggressive liquids. Upon request: body and. 2/2 G1/4 Electropilot 3 = Exhaust brass 0,220 1, ,5 4 4,5 5 5,5 6 Flow rate (Nl/min) Pressure bar , En. Deen Suitable for use with nonaggressive liquids. Coil 17 V Voltage 24V C 50/60 Hz DB V C 50/60 Hz DB V C 50/60 Hz DB0610 1_18 = close the exhaust of the electropilot to get the 2/2 NO one. (d) = the Ø shown on the 3/2 valves refers to the exhhaust. (e) = manual on M5203 ring nut Electropiltots are supplied without coil, connector and locking ring = with 2 position screw.

5 CNOMO 2/2 3/2 Electropilot for mounting on subbases SPEED technopolymer 0, En. Deen Subbase: SPEED. vailable upon request: brass (without manual ). Zamak. Stainless steel other inner diameters (e) B Modular subbase SPEED series G1/8 Override manual B ISO = Exhausts Electropilots 1 Electropilot for base Connections G 1/8 Material zamak Weight kg 0,075 dvantages The original UNIVER Speed series was realized to solve some operational problems 0900 Possibility of defining the number of subebases at the moment of use Possibility of freely increasing or reducing the number of elements Quick assembly with special screw (builtin) standard supplied Reduction of stock holding Easy technical intervention ir supply is rotated by 90 in comparison with side consumption Standard (builtin) screw and ORing When assembling the manifold, put the bases on a flat surface and tighten the screw until the manifold is perfecty aligned. ISO 4762 = close the exhaust of the electropilot to get the 2/2 NO one (e) = manual on ring nut M5203 Electropiltots are supplied without coil, connector and locking ring (d) = the Ø shown on the 3/2 valves refers to the exhhaust = with 2 position screw 1_19

6 G1/8 Subbase 2 = Use N = Number of valve position G1/8 CNOMO Subbase 2 = Use N = Number of valve position 1_20