Air Service Units Filter pressure regulator + Lubricator - Size 1. Series Technical characteristics. Construction and working characteristics
|
|
|
- Harriet Bennett
- 5 years ago
- Views:
Transcription
1 ir Service Units Filter pressure regulator + Lubricator - Size Series 00 Construction and working characteristics - Zinc alloy body or reinforced technopolymer body with threaded brass insert connections. - Wall mounting possibility with M screws protected by covers. - Transparent technopolymer bowls screwed to the body. - Shock resistant bowl technopolymer protections. - Double filtering action: by air centrifuging and by replaceable and reusable HDPE porous filter element. - Manual and semi-automatic water drain valve; in the semi-automatic version the drainage happens when there is no pressure or by pushing the valve up-wards. - Possibility to see the water level on 0 also with bowl protection assembled. - Diaphragm pressure regulator with relieving and balanced poppet. - Pressure adjusting lockable handle by simply pressing it downwards in the desired position. - Two pressure gauge connections with plug complete of seal. - Panel mounting bracket. - utomatic water drainage bowl available on request. - Fog type lubrication with variable section orifice according to the flow. - Possibility to see the min. and max. oil level on 0 also with bowl protection assembled. - Transparent technopolymer sight dome with adjusting handle. - Oil filling plug. Technical characteristics Connections Max. inlet pressure G/"-G/" bar -, MPa Max. ambient temperature (at 0 bar) 0 C Pressure gauge connections Weight with technopolymer body Weight with zinc alloy body Pressure range Filter pore size Bowl capacity Indicative oil drip rate Oil type Bowl capacity ssembly position Wall mounting screws Max. fitting torque on zinc alloy body Max. fitting torque on technopolymer body G/" gr. gr. 0 - bar 0 - bar 0-bar 0 - bar µ 0µ 0µ cm drop every 00/00 Nl FD - HG cm Vertical M 0 Nm Nm Min. operational flow at. bar 0 Nl/min.
2 ir Service Units Filter pressure regulator + Lubricator - Size Series 00 0 M0x, 0 0 ø, M G/-G/ mm hose connection Flow rate curves Inlet pressure ( bar) Flow (Nl/min) djustment characteristics Flow Q= Nl/min Flow Q= Nl/min Flow Q= Nl/min 0 0 Upstream pressure (bar) Version 0 = Zinc alloy body = Technopolymer body Connections = G /" B = G /" Filter pore size = µ B = 0µ C = 0µ _0 _. _. _. _ djusting range = 0 - bar B = 0 - bar C = 0 - bar D = 0 - bar P = Bowl protection S = utomatic drain PS = Bowl protection and automatic drain Example: 0.B.C.P Service unit combination complete with filter - pressure regulator and lubricator size G / connections, filter pore size 0µ, adjusting range 0- bar and bowl protections with technopolymer body..
3 ir Service Units High sensitive air pressure regulator with high flow rate relieving - Size Series 00 M0x, G/, G / G / Construction and working characteristics - ccurate capacity to maintain set pressure. - Sensitivity combined with high relieving rates. - High flow rate with extremely low pressure drop. - Pressure adjusting lockable handle by simply pressing it donwards in the desired position. - Body made with anodized zoll aluminium alloy - Two pressure gauge connections with plug complete of seal. - Ring nut for panel mounting. - Once set, a constant bleed of air maintains the accuracy of the regulator. This controlled release is a charasteric, not a fault. Flow rate curves (B.C) Inlet pressure ( bar) Technical characteristics Connections G/" Max. inlet pressure 0 bar - MPa Max. ambient temperature 0 C Pressure gauge connections Weight Pressure range ssembly position ir flow (inlet pressure 0 bar) Max. fitting torque Fluid B. _ djusting range = 0, - bar B = 0, - bar C = 0, - bar Example: B.C Pressure regulator with G /" 0, - bar G/" gr. 0 0, - bar 0, - bar 0, - bar ny Nl/min 0 Nm 0µm filtered air and preferably non lubricated Flow (Nl/min) djustment characteristics (B.C) Initial point 0 0 Inlet pressure (bar) Exhaust flow rate curves (B.C) Exaust flow rate curves (Nl/min).
4 ir Service Units ccessories - Size Series 00 Pressure Switch complete with adapter djusting screw Pressure switch dapter 0 Construction and working characteristics The pressure switch complete with adapter has to be assembled between two elements of the FRL group. It cannot be utilized separately or at the end of the FRL group. The pressure switch can be set at desired pressure (pressure range from to 0 bar) by rotating the adjusting screw. The electrical connection is made by mean of a mm connector DIN 0 type C. The microswitch contact could be normally closed or open (change over switch). Connection = Neutral = N.C. contact = N.O. contact Din 0 type C connector Technical characteristics Max. inlet pressure bar. MPa Max. temperature 0 C Weight gr. 0 Microswitch capacity Grade of protection (with connector assembled) IP djusting range - 0 bar ssembly position ny _ = Pressure switch adapter B = Pressure switch C = Pressure switch complete with adapter Example: C Pressure switch complete with adapter..
5 ir Service Units ccessories - Size Series 00 ir Intake ir Intake - H profile 0 0 G/ ø. 0 M G/ G/ Ø, through, , ø0 E G D 0, ø, G/ G/ 0 Weight gr. Weight gr. 0 0H Fixing bracket Fixing bracket,,, R0 0 Weight gr. Weight gr. 0 0M ssembling kit ssembling kit for manifold regulators 0 (standard) (for progressive start-up valve) Weight gr. Weight gr. 0 0M Pressure gauge B C DIMENSIONS 00 _. _ CODE B C D E G Weight gr G/" 0 00B 0 G/" 0 = Dial ø0 B = Dial ø0 = Scale 0- bar B = Scale 0- bar C = Scale 0- bar.0
6 ir Service Units Spare parts - Size Series 00 Filter RS/0/0 RS/0/ RS/OR RS/0/ RS/0/ RS/0/ RS/0/ RK0/0 RK0/0 RK0/0 RK0/0 RK0/0 Porous filter element 0µ Porous filter element µ Porous filter element 0µ Bowl protection Filter bowl c/w drain valve Filter bowl c/w automatic drain Filter group assembly 0µ Filter group assembly µ Filter group assembly 0µ Coalescing filter RS/0/ RS/0/ RS/OR RK0/0 RS/0/ RK0/0 RK0/0 Coalescent group 0.µ Bowl protection Filter bowl c/w drain valve Filter bowl c/w automatic drain.
7 ir Service Units Spare parts - Size Series 00 Panel mounting pressure regulator RS/0/ RS/0/ RS/0/ RK0/0 RS/0/0 RS/0/ RS/0/ RS/0/ RK0/0 RK0/0 RK0/0 RK0/00 Lock nut djusting knob djusting support djusting screw assembly Spring 0- bar range Spring 0- bar range Spring 0- bar range Spring 0- bar range Diaphragm assembly Diaphragm assembly w/o relieving Nozzle c/w poppet Plug c/w seal G / Modular pressure regulator 0 RS/0/ RS/0/ RS/0/ RK0/0 RS/0/0 RS/0/ RS/0/ RS/0/ RK0/0 RK0/0 RS/0/ RK0/00 RS/0/0 RK0/0 RS/OR RS/0/ Lock nut djusting knob djusting support djusting screw assembly Spring 0- bar range Spring 0- bar range Spring 0- bar range Spring 0- bar range Diaphragm assembly Diaphragm assembly w/o relieving Plug c/w seal G / Poppet c/w spring Plug 0.
8 ir Service Units Spare parts - Size Series 00 Lubricator 0 RK0/0 RS/OR x, RS/OR 0 RS/0/ RS/0/ RS/0/0 RS/OR RS/0/ RS/0/ RS/0/ Lubricator sight dome assembly Venturi diaphragm Bowl protection Lubricator bowl Oil tube 0 Filter - Pressure regulator 0 RS/0/ RS/0/ RS/0/ RK0/0 RS/0/0 RS/0/ RS/0/ RS/0/ RK0/0 RK0/0 RS/0/ RK0/00 RS/0/0 RK0/0 RS/OR RS/0/ RS/0/ RS/0/ RS/0/ RK0/0 RK0/0 RK0/0 RK0/0 RK0/0 Lock nut djusting knob djusting support djusting screw assembly Spring 0- bar range Spring 0- bar range Spring 0- bar range Spring 0- bar range Diaphragm assembly Diaphragm assembly w/o rel. Plug c/w seal G / Poppet c/w seal and spring Porous filter element 0µ Porous filter element µ Porous filter element 0µ Bowl protection Filter bowl c/w drain valve Filter bowl c/w automatic drain Filter group assembly 0µ Filter group assembly µ Filter group assembly 0µ 0.
Series 1700 Size 1 1.8
Series 1700 1.8 Series 1700 1.9 Series 1700 Air Service Units Filter 17v01c.s.t 0 = Zinc alloy body 1 = Technopolymer body c CONNECTIONS A = G 1/8" B = G 1/4" Filter pore size A = 5 s B = 20 C = 50 TYPE
Series 1700 Size
.84 .85 Air Service Units Filter 17401c.s.t c CONNECTIONS B = G 1" Filter pore size A = 5 s B = 20 C = 50 t TYPE S = Automatic drain Example: 17401B.B Filter size with G 1" connections and filter pore
Series Airplus Size 1
Size 48 4 42 * 8 76 55 24 27.5.5 G/4 - G/8 Example : T7BL : size, Lubricator with Technopolymer threads, G/4" connections Inlet pressure (bar) 2,5 4 6, Pressure drop (bar), 2 4 6 8 2 4 6 Flow (Nl/min)
Air treatment filter EZF G 3/8 - G 1/2 - G 1
EZ filter EZF G 3/8 - G 1/2 - G 1 Filters series "EZF" are produced with connections G 3/8, G 1/2 and G 1; they are available with various degrees of filtration and with manual, semiautomatic or automatic
Air service units series X G1/4 to G3/4
Air service units series X FX Filter.042 RX Pressure regulator.044 FRX Filter/regulator.046 OX Lubricator.048 FROX Two-piece air service unit.050 KX Ball valve.052 VMX 3/2-way inline valve.053 DAX Soft
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
Stainless Steel FRLs
Stainless steel FRLs Stainless Steel FRLs Units 205 Stainless steel FRLs - PF504 Series - 1/4 Inch Ports PF504 Filter Miniature Features Stainless steel construction handles most corrosive environments
Air service units filters, regulators and lubricators
filters, regulators and lubricators Legris offers an extensive range of filters, regulators and lubricators, including individual units and combinations. s - eliminate dust and coagulation from compressed
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
FRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
Modular line 042 1/4. Regulator. Regulator
1 Modular line 1/ Regulator 5..5 3..3 1..1 3,5 1 7 INLET PRESSURE = 1 (1 ),3,,5 1,5 3 1 8 17,5 1 15 1 Regulator * Sensitive high performance model with rolling diaphragm; high stability with low load losses
with interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Series MD coalescing filters New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 1 mm. Modular assembly Bowl with technopolymer
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Air Preparation Products 652 Series Filter Regulator (FR) for Process Industry Applications
Air Preparation Products Series Filter Regulator (FR) for Process Industry Applications www.asconumatics.eu Table of Contents Series Particulate Filter/Regulator 2 Particulate Filter 5 Regulator 8 Kits
MX2 ports: G3/8, G1/2, G3/4 - MX3 ports: G3/4, G1 Modular Bowl with technopolymer cover and bayonet-type mounting
> Filters Series MX CATALOGUE > Release 8.5 Filters Series MX MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Bowl with technopolymer cover and bayonet-type mounting Removal of impurities and condensate
F64C, F64H - Olympian Plus Plug-In System Puraire high efficiency coalescing filter
> > Port size: /... 3/ (ISO G/PTF) > > Service indicator standard > > High efficiency coalescing filters > > Quick release bayonet bowl > > Coalescing element removes sub-micron particles and converts
F64G. Typical flow with 40 µm element at 90 psig (6.3 bar) inlet pressure and a 5 psig (0.35 bar) pressure drop. F64G- N - D 1/4 2 3/8 3 1/2 4 3/4 6
Olympian Plus eneral Purpose Filter F, FE eneral purpose filters Olympian Plus plug in system Effective liquid removal and positive solid particle filtration Large filter element area provides minimum
Filters, Gauges, Regulators
Filters, s, Regulators SCFM = Cubic ft/min at Ambient Condition s Sold Separately s...1/4" Flow SCFM...21 s...1/4" Flow SCFM...15 Filters - Construction Mini 1/4" 3000 Regulators Without Mini 1/4" 3100
Air Preparation Products
Air Preparation Products Series Series Filter Regulator Lubricator (FRL) www.asco.com Table of Contents / Series Product Overview 2 Particulate Filter 4 Coalescing Filter 8 Adsorber Activated Carbon 8
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
How to Order 02 1/4. Thread type Nil Rc N NPT * * Semi-standard
Filter Regulator IW Series Two types are available: adjustable set pressure type and fixed set pressure type. Low/High temperature and external parts copper-free types can be selected. Pressure gauge connecting
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
MOUNTING BRACKETS. Dimensional Drawing - Mounting Options
/ MOUNTING BRACKETS Dimensions: mm Dimensional Drawing - Mounting Options Series Side Mounting Brackets Kit: PAT503860001 Series Side Mounting Brackets Kit: PAT503860002 E G F C D ØH B A Series A B C D
F.R.L. unit modular type
F.R.L. unit modular type CKD Corporation CC-8EU-GB BSIC CONCEPT Pursuing high performance for all aspects, functionality, operability, serviceability, and safety. Compressed air filter, regulator, lubricator,
Dimensional Drawing - Mounting Options
Dimensions: mm Dimensional Drawing - Mounting Options Side Mounting Brackets Kit: PAT50386002 E G F C D B A A B C D E F G 25 11 20 10 6,3 50 1,9 Wall/Panel Bracket Kit: P699AT502467001 K J ØH D M 01813GB-2015/R01
Installation Components AirCare Air Preparation Systems
Care Preparation Systems Modular Line Filters 602104 602106 602108 * Transparent 602109 nylon liquid level indicator -18 lens. to 79 C Body Bowl Material icle Zinc Aluminum Zinc* Aluminum* Sintered Polypropylene
Filters, regulators, and lubricators
Filters, regulators, and lubricators 28 filters 3/8", 1/2", and 3/4" Ports Technical data Polycarbonate bowl Polycarbonate bowl guard Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain
Compact design suitable for use in reduced mounting space. CONTROL > Directly operated solenoid valves Series PN GENERAL DATA
> Directly operated solenoid valves Series PN Directly operated solenoid valves Series PN 3/-way Normally Closed (NC). The solenoid valves can be mounted on a single base (with M5 ports) as well as on
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
2,1 2, , ,1 2, W (DC) - 10 VA (AC) AM-5111 U2 DB 12 V DC - 24 V DC - 24 V AC V AC V AC IP65
B Miniature Electropilots CHRCTERISTICS mbient temperature Fluid Coutation system Connections Nominal bore () Nominal flow rate (Nl/min) Power consumption Connector Sleeve Coil Voltage Protection degree
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
Installation Components AirCare Air Preparation Systems
Modular Line Filters 602104 602106 602108 602109 250 psig / 17 bar Body Material icle Zinc Zinc* * Sintered Polypropylene 40µ 602104 Drain Type Port PTF ¹ ₄ 602106 Manual ³ ₈ A B C Dia. 5.27 / 1.34 0.75
26 SERIES FILTER Operating Instructions and Parts List
90-400* (revised 01/05) Questions regarding this form should be directed to the following: 732-390-8480 26 SERIES FILTER Operating Instructions and Parts List Application: The 26 Series Filter is rugged,
F20 & F21 QIX Particulate & Coalescing Filters
F2, F21 Series QIX Filters 1/4, 3/8, 1/2, 3/4 & 1 Inch Ports F2 & F21 QIX Particulate & oalescing Filters Manual rain utomatic rain Unique Interchangeable QIX Inserts llow One Module to ccommodate Port
Port Size. Connection G1/8 G 1/4 G 3/8 G 1/2 G 3/4 G 1. Standard nominal flow rate * 3000 I/min I/min I/min I/min I/min.
1/4-1 MXLOW LTRS Made as per SO 5782-1 standard. igh level of condensate seperation. Sturdy construction in aluminium. asy removal/refixing of bowl owl guard for 3/8" & 1/2" Size offered as a standard
Series IW. Filter Regulator
Standard Specifications Model IW212 IW213 IW215 IW222 Adjustable type (Basic) Fixed type Maximum supply pressure Max. 1. MPa.3 to 1. MPa Set pressure.2 to.2 MPa.2 to.3 MPa.2 to.5 MPa.14 MPa Air consumption
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
CORRECT SELECTION OF COMPRESSED AIR PROCESSING EQUIPMENT
CORRECT SELECTION OF COMPRESSED AIR PROCESSING EQUIPMENT Most SHAVO units are available in port sizes from 1/8 to 2 and there is a wide choice of filter elements and regulating and relief spring ranges
Lubricator Series Functional explanation / Dimensions
00E/00E Series Lubricator / utofill type Only installing oil tank enables lubrication to multiple lubricator. : Rc/ to Rc JIS symbol ir uto. drain Specifications escriptions 00E///V 00E/8V ompact lean
AIR PREPARATION UNITS 1/8" NPT & 1/4" NPT SERIES light
PNEUMATIC GROUP AIR PREPARATION UNITS 1/" NPT & 1/" NPT SERIES,,,, MPa 1,,,,, MPa 1, 1 3 5 7,,,, MPa,, 1, MPa, Made in Germany MR- E MPa 1,,,,, 1,, p max= Port size Recommended flow Type Page No. (l/min)*
Parker Global Air Preparation System
Parker Global System Parker Global System A complete air preparation system 7 Parker Global System Parker Global Air Preparation System Global. Economical. Modular. Performance you need, wherever you need
W1000/W3000/W4000/W8000 Series
Filter and W/W/W/ Series New Series of m elements for dust removal, and m elements for tar removal : / to JIS symbol Specifications Descriptions Appearance W W W nic sensor Pressure Working fluid Max.
FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2
FILTER, REGULTOR ND FILTER/REGULTOR Stainless Steel L Compact /, High Flow / - / FETURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment and suitable for use in
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
Drain Type Semi-Automatic
INLINE FILTERS Features Pipe or Bracket Mounted Point of Use Filters Quick Release Bayonet Bowl Connection Easy Change Filter Elements Transparent Filter Bowl For Element Inspection Semi Automatic (pull
BL84 - Excelon Plus Modular System Filter/regulator - Lubricator Combination Units
BL84 - Excelon Plus Modular System > Port size: 3/8... 3/4 (ISO G/PTF) > Unique Quikclamp connection system offers full modularity > 40 micron particle and high efficiency water removal (> 98%) > Shut
3000 Series filters 3/4" and 1" Ports
38 filters 3/4" and 1" Ports Technical data Metal bowl Metal bowl sight glass Filter body Manual drain Auto drain Standard filter Coalescing filter Seals Filter baffle Aluminum Nylon Aluminum Brass + nitrile
Modular FRLs. Pneumatic Mini Series G 1 /8 - G 1 /4. Modular Junior Series G 1 /8 to G 3 /8 Modular Maxi Series G 1 /4 to G 3 /4 Modular Series G1
Modular FRLs Pneumatic Mini Series G /8 - G /4 Modular Junior Series G /8 to G 3 /8 Modular Maxi Series G /4 to G 3 /4 Modular Series G Catalogue no. 258G-ca Mini IndexFRLs Mini FRLs Page o. Introduction
Model Model 815
Model 600004 Model 600204 Model 85387 Model 600104 Model 815 ir line products and accessories ir couplers and nipples............................... 196 low guns, tire inflators and siphon sprayers.............
Servo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
5-27 A IR PREPARATION FILTERS: HIGH FLOW H IGH FLOW AIR FILTER SERIES AF AF (1 1 2) AF (2) S TOCKED AF (1 1 2) AF (2)
查询 ARJ1020F-M5-06 供应商 H IGH FLOW AIR FILTER SERIES AF A IR PREPARATION 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 FILTERS: HIGH FLOW 5-27 Port Sizes 1 1 2-2 Rc 5µm filter element High efficiency drainage Bowl guard standard
02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
Miniature electropilots U2
Direct intervention electropilots with poppet valve system and bottom cushioned ssembly on subbase Threaded connections on the body CNOMO interface Orientable coil (360 ) separated from mechanical part
AIR PREPARATION PRODUCTS. Table of Contents
AIR PREPARATION PRODUCTS Table of Contents Page Air Filters................................................. 5-7 Oil Removal Filters......................................... 8-9 Regulators..............................................
LUBRICATORS. Lubricators 44
LURITORS Most pneumatically operated equipment such as valves, cylinders, and air tools, require some form of lubrication to reduce equipment maintenance and prolong life. ir driven devices can be lubricated
solenoid/air operated
Series Modulair 0- range G/8 to G/ SHUT-O VLVE ND SOT- STRT UNIT solenoid/air operated Modulair 50 G/ - G version: See P0-9 PPLICTION This unit provides two main functions: - Pneumatic system venting.
Air Controls. Air Regulators /0 Mini gun mounted air flow regulator 1/4 BSP(F) x 1/4 BSP(M) C/w glass fronted gauge.
Air Controls Air Regulators 78-210/0 Mini gun mounted air flow regulator 1/4 BSP(F) x 1/4 BSP(M) C/w glass fronted gauge. Quick Detach Hi-Flo Air Couplings & Tails 50-401 Quick detach doubleacting coupling1/4
50 SERIES FILTER F50B Series F50B-04 pictured Application ANSI SYMBOL Primary air filters are designed to separate liquid, water, rust, pipe scale, an
FRL Products and Accessories High Flow FRL Series 50 Series Filters 44 50 Series Regulators 45 50 Series Pilot Operated Regulators 46 50 Series Lubricators 48 50 Series Filter/Regulator/Lubricator Combinations
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239
Valves Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service
Nugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
Compact direct acting precision regulator
direct acting precision Components preparation and pressure adjustment / unit CONTENTS Product introduction 6 Safety precautions 62 Discrete (RJB500) 624 Block manifold (MNRJB500) 626 Block configurations
Flow limiter SP/SMB3 Flow limiter SP/SMB6
-00-EN Flow limiter SP/SMB Flow limiter SP/SMB6 for circulating-oil lubrication systems Advantages reliable perpetual dispensation of individual volume flows - self-adjusting metering, thus identical volume
unrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67
3 Technical data General characteristics Design Flow direction Seals De-energized position Mounting attitude Description, value, unit line mounting P A controlled P R surplus flow discharge (models shown
F. R. L. FRL Series MC Assembled. Ports G1/4, G3/8 and G1/2
MC S E R I E S Catalogue 2005-200 FRL Series MC Assembled Ports G1/4, G3/8 and G1/2 The FRL Series MC in the assembled version are more easy to order (one single code) and to mount. The versione with terminal
PILOT OPERATED PRESSURE REDUCING VALVE TYPE DR
PILOT OPERATED PRESSURE REDUCING VALVE TYPE DR Size, 20, 0 up to 1,5 MPa up to 00 dm /min. WK 495 690 04.1999r. Pilot operated pressure reducing valves type DR are used to reduce pressure in hydraulic
Compressed Air Lubricators
ompressed ir s Operating pressure onnection Device Page max. bar thread made of plastic 16 G¼ - G1 L042... L095.02 Maxi -Series, robust, block design 17 G¼ - G1 L20.03 Standard -Series, robust 21 G¼ -
Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T ) Burst 330 bar (4800 psi) (acc. to NFPA T ) Wire mesh µm
HYDRAULIC FILTRATION In line medium pressure filters Technical Information Pressure: Max working 110 bar (1600 psi) (acc. to NFPA T 3.10.5.1) Burst 330 bar (4800 psi) (acc. to NFPA T 3.10.5.1) Housing
74 Series Combination Filter/Regulator and Lubricator Unit, featuring an in-line shut-off valve, and Quikclamp system.
NCA-33 January 1998 Supersedes November 199 EXCELON Series System Features...2 EXCELON Series Product Features... Filters F72G General Purpose Filters... F73G General Purpose Filters...8 F7G General Purpose
Integral Fitting Type (Hyper Fittings) How to Order Valves (Single Type) Material. Symbol N PFA F PFA
Integral Fitting Type (Hyper Fittings) Series LVC ody class pplicable tubing size Connecting tubing O.D. Metric sizes 0 0 08 0 9 Inch sizes 0 0 07 9 ody class ø ø ø8 ø0 ø ø9 ø /8 / / /8 / / asic size Orifice
Power Valve Precision Regulator
Power Valve Precision Regulator VEX Series High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
P3Y Series Air preparation system. 3/4 & 1 Body ported
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding P3Y Series Air preparation system 3/4 & 1 Body ported Catalogue no.
series UK Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1 DESCRIPTION MATERIALS TECHNICAL DATA Poppet valves series UK
DESCRIPTION Valves series UK are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes G 1/8 and G 1/4, support the 15 mm direct acting valve (type UMCSV
Pilot Operated 2 Port Solenoid Valve for Dry Air
Pilot Operated Port Solenoid Valve for Dry ir VQ0/30 Series Compact and lightweight with large flow capacity [Option] VQ0 Weight (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series VQ0 Series VCH VDW SX0
GENO -MX 1" - MX DN 100 backwash filter. Intended use. Scope of supply. Function. Structure
Subject to modifications TD2-AM001en_004 Edition June 2017 GENO -MX 1" - MX DN 100 backwash filter Intended use The GENO -MXA backwash filters are suitable for the following sectors: Filtration of drinking
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
Ready for outdoor use too!
Filter/regulator assured for outdoor use New Product Filter/regulator series First in the industry FILTER REGULATOR FOR DOOR USE Ready for outdoor use too! Improved outdoor durability due to the exterior
Manifold Regulator Modular Type. Regulator for manifold. Body size. Number of stations stations. 10 stations. Standard Specifications
Manifold Regulator Modular Type /3000 Series modular type that can be freely mounted on a manifold station. Optimal for central pressure control. Easily set up using the new knob. lso has a One-touch lock
1 6 / 2 6 S E R I E S C O M P A C T & S T A N D A R D M O D U L A R A I R P R E P A R A T I O N S Y S T E M S
16/26 SRIS O M P T & S T N R M O U L R I R P R P R T I O N S Y S T M S WILKRSON FILTRS, RGULTORS N LUBRITORS R26 Regulator F26 Filter L26 Lubricator M16 oalescing Filter B6 Filter/Regulator w/ Optional
VALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators and
5.22 A IR PREPARATION FILTERS: HIGH EFFICIENCY H IGH FLOW AIR FILTER SERIES AF AF (1 1 2) AF (2) AF (1 1 2) AF (2) S TOCKED
5.22 FILTERS: HIGH EFFICIENCY H IGH FLOW AIR FILTER SERIES AF Port Sizes 1 1 2-2 Rc 5µm filter element High efficiency drainage Bowl guard standard AIR FILTER MODELS AF800/900 AIR FILTER MODELS AF811/911
Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
PDE2611TCUK-ca Air Preparation. Miniature FRL series. Miniature FRL Series. Parker Hannifin Corporation Pneumatic Division - Europe
P26TUK-ca ir Preparation Miniature RL series Miniature RL Series 49 Parker Hannifin orporation Pneumatic ivision - urope P26TUK-ca ir Preparation Miniature RL series - /8", /4" asic /8" ody 4 ilters -
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Page General Purpose Filter Replacement Filter Elements Bowl Assemblies Accessories & Optional Extras
New Comprehensive Accessory & Maintenance Kit Listing Page.009 General Purpose Filter Replacement Filter Elements Assemblies Accessories & Optional Extras Page.05 Relief Valve Accessories and Optional
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS
ARO-FLO SERIES FILTERS, REGULATORS AND LUBRICATORS For more than years, Ingersoll Rand ARO has been an industry leader in the design and ARO-Flo Series manufacture of compressors, pneumatic tools, and
INSTRUCTION AND MAINTENANCE MANUAL FR95 PRESSURE REGULATOR
Enidine / Conoflow 105 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-7993 WARNING Conoflow s products are designed and manufactured using materials and workmanship required to meet
seriesuk Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1
seriesuk Poppet valves pilot and actuated G 1/8 - G 1/4 - G 1/ - G 1 DESCRIPTION Valves series "UK" are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes
BL84 - Excelon Plus Modular System Filter/regulator - Lubricator Combination Units
BL84 - Excelon Plus Modular System > Port Size 3/8" to 3/4" (PTF/ISO G) > Quickclamp connection system offers full modularity > Shut off valve & Filter/regulator with tamper resistant feature > Metal bowl
VALVES. Wilkerson. Filters, Regulators & Lubricators. dixonvalve.com Customer Service:
FACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURI VALVES Wilkerson Filters, Regulators & Lubricators dixonvalve.com Customer Service: 877.963.4966 Filters
Air preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview Air preparation unit three-piece 22, 23, 26 29 37, 39 Air preparation unit two-piece 22, 23, 26 29 37, 39 Filter-regulator
VALVES. V44/V45 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 26 mm
V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich
FILTER, REGULATOR AND FILTER/REGULATOR stainless steel 316L compact 1/4, high flow 1/4-1/2
FILTER, REGULATOR AND FILTER/REGULATOR stainless steel L compact /, high flow / - / Air Preparation Series FEATURES Stainless Steel, and intended for corrosive environment and suitable for use in potentially
PURESTREAM -FRL PURESTREAM - FRL. Installation / Operating / Maintenance Instructions Filter Series F1. Specifications.
PURESTREAM FRL I S F1 0 01/OM PURESTREAM FRL Installation / Operating / Maintenance Instructions Filter Series F1 I S F1 0 01/OM Trouble shooting Trouble Cause Remedy 1. Restricted air flow Filter element
Precision Control Devices
Precision Control Devices Electro-Pneumatic Servo Pressure Controllers Electro-Pneumatic I/P, E/P, & P/I Transducers Diaphragm Regulators & Relays Diaphragm Cylinders Filter - Regulator - Lubricators Gauge
Air preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview Air preparation unit three-piece 8 11 12 16, 17 Air preparation unit two piece 8 11 12 16, 17 Air preparation Filter-regulator
FILTER, REGULATOR AND FILTER REGULATOR stainless steel 316L compact 1/4, high flow 1/4, 1/2, 3/4 and 1
FILTER, REGULATOR AND FILTER REGULATOR stainless steel L compact /, high flow /, /, / and Air Preparation Series FEATURES Stainless Steel, Regulator and Regulator intended for corrosive environment and
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
VAL-138. Valves. Electrical Details for Solenoid Pilot. Operating Pressure
Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot ctuated ISO 5407- / VDM 24 563 Size 26 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich
5/2-5/3 VALVES (1/8" + SUBBASE) Series G
/-/ VLVES (/" SUBBSE) Series G G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact