FILTER, REGULATOR AND FILTER REGULATOR stainless steel 316L compact 1/4, high flow 1/4, 1/2, 3/4 and 1

Transcription

1 FILTER, REGULATOR AND FILTER REGULATOR stainless steel L compact /, high flow /, /, / and Air Preparation Series FEATURES Stainless Steel, Regulator and Regulator intended for corrosive environment and suitable for use in potentially explosive atmosphere caused by gases, vapours, mists and / or dust according to new ATEX directive //EU. SAFETY CODE: II GD IIC T C (T), with 9 C ambient temperature II GD IIC T8 C (T), with C ambient temperature (ZONE -) Explosion group IIC CU-TR certified for potentially explosive atmospheres Functional Safety: IEC 8, SIL certified Comply with the European Essential Health and Safety Requirements (EN-) All internal metal parts made of / L stainless steel Built-in overpressure relieving function, non-relieving option available Quick Relief available (), allowing downstream pressure in the actuator or other instrument to exhaust in the event if supply pressure is lost L Stainless Steel body, bonnet and bowl Internal springs made of INCONEL to suit sour gas environment complying to NACE MR / ISO () () Available for High Flow SSFR and standalone regulator as an option () Only available for High Flow SS FR as an option INCONEL is trademark of the Special Metals Corporation group of companies BENEFITS () () Precise tuning and regulation - using dual spring design () () Improved regulation accuracy - with pitot tube feedback Longer lifespan - using rolling diaphragm Effective moisture removal - using fin diverters to create centrifugal action () Long lasting product labelling - laser etched marking on stainless steel bowl () Only available for High Flow / - / SS FR () Only available for High Flow / - SS FR IN OUT CHARACTERISTICS Fluids Compliance to NACE for sour Gas environment Compact High Flow (/ - /) High Flow (/ - ) Compressed air, neutral gas, natural gas No Compressed air, neutral gas, natural gas & sour natural gas Yes (as an option) Quick Relief No Yes () (as an option) Ports / / & / / & Threads Pressure range (inlet) Regulating pressure (outlet) Regulation NPT G as an option - bar (Manual Drain), - bar (Auto Drain), - bar By hexagonal head screw with nut Hysteresis <, bar <, bar <, bar ing capacity µm & µm µm, µm & µm Operating temperature () - C to +9 C Low temperature option - C - C - Condensate Drain () Available for standard temperature of - C to +9 C only () Operating temperature for Automatic Drain: + C to + C Manual & Automatic CONSTRUCTION Compact High Flow (/ - /) High Flow (/ - ) Body, bonnet & bowl AISI L SS Bowl capacity cm cm cm ing element AISI SS Diaphragm LT FPM HNBR FPM Elastomers FPM 8GB-8/R

2 PRODUCT CODE A 8 AD Options Product series AD = Automatic Drain () AN = Automatic Drain with /8 NPT connection () G () () () () = SS pressure gauge Revision letter K = Quick Relief () A = Initial release LT () (8) = Loww Temperature MB = L SS Mounting Brackets () F/R/FR type AD + AN is not a possible combination 8 = SS Regulator (FR) LT + AD/AN is not a possible combination 9 = (F) (9) A = Regulator (R) (9) Filtration/port size = High Flow / NPT µm or Regulator only Pressure relief / vent hole = High Flow / G µm or Regulator only = Non relief diaphragm type () () = High Flow / NPT µm or Regulator only = Ø M thread () = High Flow / G µm or Regulator only = Ø /8 NPT () = High Flow / NPT µm = High Flow / G µm = High Flow / NPT µm Certifications & approvals 8 = High Flow / G µm = ATEX / 9 = Compact Basic Flow / NPT μm () = ATEX / + CUTR A = Compact Basic Flow / G μm () = ATEX / + NACE (9) B = Compact Basic Flow / NPT μm () = ATEX / + NACE + CUTR (9) C = Compact Basic Flow / G μm () () Not available for Regulator () Not available for filter () For High Flow SSFR or Standalone Regulator, a SS pressure gauge with Ømm dial and / NPT gauge port will be delivered () For Compact SSFR, a SS pressure gauge with Ømm dial and /8 NPT gauge port will be delivered () Not mounted onto the product. Separate packaging. () Available for High-Flow SSFR and standalone regulator only () For High-Flow /" - /" SSFR or Compact SSFR with pressure gauge, a special low temperature SS pressure gauge will be delivered (8) Not available for High-Flow /" - " SSFR, standalone filter and regulator (9) Not available for Compact version () Default for standalone filter option. () Bonnet with Ø /8" NPT thread () Only available in regulator. No standalone filter or regulator. D = High Flow / NPT μm or Regulator only E = High Flow / G μm or Regulator only F = High Flow NPT μm or Regulator only G = High Flow G μm or Regulator only H = High Flow / NPT μm J = High Flow / G μm K = High Flow NPT μm L = High Flow G μm M = High Flow / NPT μm N = High Flow / G μm P = High Flow NPT μm Q = High Flow G μm NOTES: Please refer to our online configurator for option combinations availability μm, μm & μm filtration are not applicable for standalone regulator /8" port size for compact SSFR is also available upon request Standard regulating pressure is, - bar., -, bar is also available upon request ORDERING EXAMPLE. Compact low temperature stainless steel Regulator (/ NPT, µm filtration) with low temperature pressure gauge & mounting bracket Product Code: A89GLTMB. High-Flow stainless steel Regulator (/ NPT, µm filtration) with Auto Drain, pressure gauge & mounting bracket Product Code: A8ADGMB. High-Flow stainless steel Regulator (/ NPT, μm filtration) with Auto Drain, pressure gauge & mounting bracket Product Code: A8DADGMB 8GB-8/R

3 MAXIMUM FLOW VALUES Construction Type Maximum Flow Values Following ISO Standards 8, 8 and 9 Compact High Flow (/ - /) High Flow (/ - ) / NPT / NPT / NPT / NPT NPT μm μm μm μm μm μm μm μm μm μm μm μm Inlet pressure =, bar and P = bar Regulator Inlet pressure = bar, setpoint =, bar and P = bar Regulator Inlet pressure = bar, setpoint =, bar and P = bar AUTO DRAIN PRESSURE GAUGE Maximum inlet pressure COMPACT SS FR SSFR (/ - /) SSFR (/ - ) COMPACT SS FR SSFR (/ - /) bar Pressure - bar - bar Operating pressure, - bar Diameter Ø mm Ø mm Operating temperature C to + C Gauge port size /8 NPT / NPT Metal parts L SS Material Stainless Steel SSFR (/ - ) Elastomers FPM Protection IP; Safety glass; Fixed crimped case to avoid accidental dismounting Float material Rigid Polyurethane PP material Rigid Polyurethane Kit number C9 C Adaptor ( SS) for /8 NPT conversion AN as option Kit number (for Low Temp) C98 C - MOUNTING BRACKET Option Weight (kg) Auto Drain, COMPACT SS FR SSFR (/ - /) SSFR (/ - ) Adapter for Auto Drain, Material L Stainless Steel Pressure Gauge, Kit number C8 C8 Mounting Bracket,9 INSTALLATION Installation/Maintenance instructions are included with each /Regulator Air flow direction indicated by IN/OUT as well as inlet & outlet indicators Pipe connection has standard thread according to NPT (ANSI..) 8GB-8/R

4 DIMENSIONS(mm), WEIGHT(kg) FILTER F *-MOUNTING. HOLES REGULATOR F G THREADED PRESSURE-RELIEF CONNECTION(NON-RELIEF OPTION AVAILABLE RELIEF TABLE: PORT SIZE ØD C RELIEF TABLE: PORT SIZE ØD *-MOUNTING. HOLES /" NPT PRESSURE GAUGE CONNECTION E D C AUTO DRAIN SUFFIX-AD MANUAL DRAIN AUTO DRAIN WITH ADAPTOR (/8" NPT) SUFFIX-AN A B FILTER REGULATOR F MOUNTING BRACKET THREADED PRESSURE-RELIEF CONNECTION (NON-RELIEF OPTION) AVAILABLE J RELIEF TABLE: PORT SIZE ØD *-MOUNTING HOLES C D H G /" NPT PRESSURE GAUGE CONNECTION () /8" NPT PRESSURE GAUGE CONNETION (COMPACT) E MANUAL DRAIN WITH PRESSURE GAUGE MANUAL DRAIN AUTO DRAIN SUFFIX-AD AUTO DRAIN WITH ADAPTOR (/8" NPT) SUFFIX-AN A G H J A B B * Note: Mounting hole size M for High-Flow /, /, / & SS FR and mounting hole size M for Compact SS FR DIMENSIONS(mm), WEIGHT(kg) SPARE PARTS KITS Type ØD NPT Weight (kg) A B C D E F G H J Type ing Capacity Spare Parts Kit Number Standard Spare Parts Kit Number Low Temp COMPACT HIGH FLOW Regulator Regulator Regulator /, 8 Ø8 / /, 8, - - /, / /,, - -, Ø /, Ø / /,, Ø /, Ø / / - / / - COMPACT μm C9 C99 Regulator μm C9 C99 μm C9 μm C Regulator - C C99 Regulator μm C C99 μm C C99 μm C - μm C - μm C - Regulator - C - Regulator μm C - μm C - μm C8-8GB-8/R

5 PRESSURE DROP vs. AIR FLOW CURVES High Flow St. steel filter /" NPT Ref. : A9 Filtration µm with P inlet bar High Flow St. steel filter /" NPT Ref. : A9 Filtration µm with P inlet bar Pi=bar Pi=.bar 8 Pi=bar dm /s Pi=bar 8 Pi=.bar Pi=bar dm /s High Flow St. steel filter /" NPT Ref. : A9 Filtration µm with P inlet bar High Flow St. steel filter /" NPT Ref. : A9 Filtration µm with P inlet bar Pi=bar Pi=.bar Pi=bar Pi=bar Pi=.bar Pi=bar 8 dm /s 8 dm /s High Flow St. steel filter /" NPT Ref. : A9M Filtration µm with P inlet bar High Flow St. steel filter /" NPT Ref. : A9D Filtration µm with P inlet bar Pi=bar Pi=.bar Pi=bar Pi=bar Pi=.bar Pi=bar dm /s dm /s 8GB-8/R

6 PRESSURE DROP vs. AIR FLOW CURVES High Flow St. steel filter /" NPT Ref. : A9H Filtration µm with P inlet bar High Flow St. steel filter " NPT Ref. : A9P Filtration µm with P inlet bar Pi=bar Pi=.bar Pi=bar Pi=bar Pi=.bar Pi=bar dm /s dm /s High Flow St. steel filter " NPT Ref. : A9F Filtration µm with P inlet bar Pi=bar Pi=.bar Pi=bar High Flow St. steel filter " NPT Ref. : A9K Filtration µm with P inlet bar Pi=bar Pi=.bar Pi=bar dm /s dm /s 9 8 High Flow St. steel regulator /" NPT Ref. : AA P inlet b - setpoint bar bar bar. bar dm /s 9 8 High Flow St. steel regulator /" NPT Ref. : AA P inlet b - setpoint bar bar 8 8 bar. bar dm /s 8GB-8/R

7 PRESSURE DROP vs. AIR FLOW CURVES High Flow St. steel regulator /" NPT Ref. : AAD P inlet b - setpoint bar bar. bar. bar High Flow St. steel regulator " NPT Ref. : AAF P inlet b - setpoint bar bar. bar. bar dm /s dm /s High Flow St. steel filter regulator /" NPT Ref : A8 Filtration μm with P inlet b - setpoint bar bar. bar. bar High Flow St. steel filter regulator /" NPT Ref. : A8 Filtration μm with P inlet b - setpoint bar. bar. bar bar 8 9 dm /s dm /s High Flow St. steel filter regulator /" NPT Ref : A8 Filtration μm with P inlet b - setpoint bar. bar. bar bar High Flow St. steel filter regulator /" NPT Ref. : A8 Filtration μm with P inlet b - setpoint bar. bar. bar 9 8 bar 8 9 dm /s dm /s 8GB-8/R

8 PRESSURE DROP vs. AIR FLOW CURVES Compact St. steel filter regulator /" NPT Ref : A8B Filtration μm with P inlet b - setpoint bar. bar 8 bar. bar Compact St. steel filter regulator /" NPT Ref. : A89 Filtration μm with P inlet b - setpoint bar. bar bar. bar dm /s dm /s High Flow St. steel filter regulator " NPT Ref : A8K Filtration μm P inlet b - setpoint bar High Flow St. steel filter regulator " NPT Ref : A8F Filtration μm P inlet b - setpoint bar bar. bar. bar. bar bar. bar dm /s dm /s 8 High Flow St. steel filter regulator " NPT Ref : A8P Filtration μm P inlet b - setpoint bar 8 9. bar bar. bar dm /s High Flow St. steel filter regulator /" NPT Ref : A8H Filtration μm P inlet b - setpoint bar dm /s Air. bar. bar bar 8GB-8/R

9 PRESSURE DROP vs. AIR FLOW CURVES High Flow St. steel filter regulator /" NPT Ref : A8D Filtration μm P inlet b - setpoint bar High Flow St. steel filter regulator /" NPT Ref : A8M Filtration μm P inlet b - setpoint bar. bar. bar bar. bar bar. bar 8 9 dm /s 8 9 dm /s 9 8GB-8/R

10 PIC---GB -- Availability, design and specifications are subject to change without notice. All rights reserved. 8GB-8/R