3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics

Transcription

1 654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with... Type 8640 Valve island Type 031 Diaphragm valve Type 8644 Valve island Type 0044 Cylinder The Type 654 consists of the pilot flipper solenoid valve Type 6144 and a pneumatic seat valve. The flipper principle allows switch- ing of high pressures together with low power consumption and fast response times. All valves are equipped with manual override as a standard. The x 3/-way valve version is the combina- tion of two pilot flipper solenoid valves Type 6144 and a pneumatic seat valve. Technical data 3/-way valve x 3/-way valve Orifice DN 4.0 Body material Seal material Medium PPS, PA FKM, NBR Medium temperature -10 to +50 C Ambient temperature -10 to +55 C Manual override Port connection Pneumatic module Lubricated, oilfree, dry compressed air; neutral gases (5μm fi lter recommended) Standard Voltage tolerance ±10% Cycle rate Flange for MP11 Type MP11 with M5, M7, push-in connection Ø 6 mm approx c.p.m. Voltage 4 V DC * Nominal power 0.8 W x 0.8 W Duty cycle Electrical connection on valve Type of protection Continuous operation (100% ED) Rectangular plug with -pole raster 5.08 mm IP 40 with rectangular plug Protection class 3 acc. to VDE 0580 Weight 0 g 40 g Rectangular plug with 3-pole raster.54 mm Mounting with screws M x 0 with screws M x 8 Installation As required, preferably with actuator upright Response times [ms] Opening Closing Measurement acc. to ISO 138 <10ms <10ms Process Valves, 5 Caulside Drive, Antrim, Northern Ireland, BT41 DU sales@pneutrol.com, Tel +44 (0)

2 654 Ordering chart for valves 3/-way solenoid valve Circuit function Orifice [mm] QNn value air [l/min] ) Pressure range [bar] 3) Voltage/ frequency [V/Hz] C 3/-way valve Vac.-10 1) 4V/DC * V/DC * V/DC * D 3/ way valve V/DC * x 3/-way solenoid valve Circuit function Orifice [mm] QNn value air [l/min] ) Pressure range [bar] 3) Voltage/ frequency [V/Hz] Integrated power savings electronics C x 3/ way valve Vac-10 1) 4V/DC * Yes 4) V/DC * Yes 4) V/DC * No ) Version with auxiliary pilot air ) Measured at +0 C, 6 bar pressure at valve inlet and 1 bar pressure difference 3) Measured as overpressure to the atmospheric pressure 4) Applicable on valve island 8640, AirLine system 8644 or valve blocks Process Valves, 5 Caulside Drive, Antrim, Northern Ireland, BT41 DU sales@pneutrol.com, Tel +44 (0)

3 654 Ordering chart for accessories Accessory Version Features Rectangular cable plug for 654 single valve Raster 5.08 mm with 3 m cable -pins with 300 mm fl ying leads -pins with single contacts Covering plate for 5/-way valve position Complete for 1 unused valve position Covering plate for x 3/-way valve position for 1 unused valve position Pneumatic connector module Left Push-in connection Ø 10 mm Pneumatic basic module MP11, valves wide Pneumatic basic module MP11, 8 valves wide G 1/ NPT 1/ Right Push-in connection Ø 10 mm G 1/ NPT 1/ Push-in connection Ø 6 mm without check valve with check valve in R without check valve for x 3/-way valve with check valve in R+S for x 3/-way valve Connection M5 without check valve with check valve in R without check valve for x 3/-way valve with check valve in R+S for x 3/-way valve Connection M7 without check valve with check valve in R without check valve for x 3/-way valve with check valve in R+S for x 3/-way valve Push-in connection Ø 6 mm without check valve with check valve in R without check valve for x 3/-way valve with check valve in R+S for x 3/-way valve Connection M5 without check valve with check valve R without check valve for x 3/-way valve with check valve in R+S for x 3/-way valve Connection M7 without check valve with check valve in R without check valve for x 3/-way valve with check valve in R+S for x 3/-way valve Process Valves, 5 Caulside Drive, Antrim, Northern Ireland, BT41 DU sales@pneutrol.com, Tel +44 (0)

4 654 Dimensions [mm] 3/-way solenoid valve Sectional drawing 3/-way solenoid valve 10 1 Circuit function D 1 10 Circuit function C Process Valves, 5 Caulside Drive, Antrim, Northern Ireland, BT41 DU sales@pneutrol.com, Tel +44 (0)

5 654 Dimensions [mm] x 3/-way solenoid valve Sectional drawing x 3/-way solenoid valve Circuit function C for x 3/-way valve Process Valves, 5 Caulside Drive, Antrim, Northern Ireland, BT41 DU sales@pneutrol.com, Tel +44 (0)