FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2

Transcription

1 FILTER, REGULTOR ND FILTER/REGULTOR Stainless Steel L Compact /, High Flow / - / FETURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment and suitable for use in potentially explosive atmosphere caused by gases, vapours, mists and / or dust according to: (TEX directive //EU). SFETY CODE: II GD IIC T C (T), with 9 C ambient temperature II GD IIC T8 C (T), with C ambient temperature (ZONE -) Explosion group IIC Functional Safety: IEC 8, SIL certified Comply with the European Essential Health and Safety Requirements (EN-) ll internal metal parts made of / L stainless steel Built-in overpressure relieving function, non-relieving option available L Stainless Steel body, bonnet and bowl Internal springs made of INCONEL to suit sour gas environment complying to NCE MR / ISO * * Only available for High Flow SSFR as an option INCONEL is trademark of the Special Metals Corporation group of companies BENEFITS Precise tuning and regulation - using dual spring design* Improved regulation accuracy - with pitot tube feedback* Longer lifespan - using rolling diaphragm Effective moisture removal - using fin diverters to create centrifugal action* Long lasting product labeling - laser etched marking on stainless steel bowl * Only available for High Flow SSFR IN ir service equipment Series OUT CHRCTERISTICS Compact High Flow Fluids Compressed air, neutral gas, Compressed air, neutral gas, natural gas natural gas & sour natural gas Compliance to NCE for Sour Gas Environment No Yes (as an option) Ports / / & / Threads NPT G as an option Pressure Range (Inlet) - bar (Manual Drain). - bar (uto Drain) Regulating Pressure (Outlet). - bar Regulation By hexagonal head screw with locking nut Hysteresis <. bar <. bar ing Capacity µm & µm Operating Temperature () - o C to +9 o C Low Temperature Option - o C - o C Condensate Drain Manual & utomatic () Operating temperature for utomatic Drain: + o C to + o C CONSTRUCTION Compact High Flow Body, Bonnet & Bowl ISI L SS Bowl capacity = cm Bowl capacity = cm ing Element ISI SS Diaphragm LT FPM HNBR Elastomers FPM IN OUT PI--/R.

2 SERIES PRODUCT CODE 8 D Product Series Revision Letter = Initial release F/R/FR Type 8 = SS (FR) 9 = SS (F) () = SS (R) () () Not available for compact version. Pressure Relief/Vent Hole = Non relief diaphragm type ()() = ØM thread () = Ø/8" NPT thread () Other connection on request () Not available for filter. () utomatically for standalone filter option. () Bonnet with Ø /8" NPT thread. CERTIFICTIONS & PPROVLS = TEX / Only = TEX / + CUTR = TEX / + NCE () = TEX / + NCE + CUTR () () Not available for compact version. Notes: µm & µm filtration are not applicable for standalone regulator. /8" port size for compact SSFR is also available upon request. Standard regulating pressure is.- bar..-. bar is also available upon request. OPTIONS D = utomatic Drain () N = utomatic Drain with /8 NPT dapter () () (8) (9) () G = SS pressure gauge LT = Low Temperature ()() MB = L SS Mounting Bracket () D + N is not a possible combination LT + D/N is not a possible combination () Not available for filter. () Not available for. () For High-Flow SSFR or Compact SSFR with pressure gauge, a special low temperature SS pressure gauge will be delivered. (8) For High Flow SSFR or Standalone, a SS pressure gauge with Ømm dial and / NPT gauge port will be delivered. (9) For Compact SSFR, a SS pressure gauge with Ømm dial and /8 NPT gauge port will be delivered. () Not mounted onto the product. Separate packaging. Filtration/Port Size = High Flow /" NPT µm or only = High Flow /" G µm or only = High Flow /" NPT µm or only = High Flow /" G µm or only = High Flow /" NPT µm = High Flow /" G µm = High Flow /" NPT µm 8 = High Flow /" G µm 9 = Compact Basic Flow /" NPT µm () = Compact Basic Flow /" G µm () B = Compact Basic Flow /" NPT µm () C = Compact Basic Flow /" G µm () () Only available in regulator. No standalone filter or regulator. ORDERING EXMPLE. High-Flow stainless steel filter regulator (/" NPT, µm filtration) with auto drain, pressure gauge & mounting bracket Product Code: 8DGMB. Compact low temperature stainless steel filter regulator (/" NPT, µm filtration) with low temperature pressure gauge & mounting bracket Product Code: 89GLTMB MXIMUM FLOW VLUES Compact High Flow Construction Maximum Flow Values Litres Per Minute (NR) Type Following ISO Standards 8, 8 and 9 / NPT / NPT / NPT μm μm μm μm μm μm Inlet pressure =. bar and P = bar Inlet pressure = bar, setpoint =. bar and P = bar Inlet pressure = bar, setpoint =. bar and P = bar PI--/R.

3 SERIES uto Drain Pressure Gauge Mounting Bracket Max. Inlet Pressure Operating Pressure Operating Temp. Metal Parts Elastomers HIGH FlOW SSFR bar. - bar C to + C L SS FPM COMPCT SSFR Float PP material Rigid Polyurethane daptor ( SS) for /8 NPT conversion N as option HIGH FLOW SSFR COMPCT SSFR Pressure - bar - bar Diameter Ø mm Ø mm Gauge Port Size /" NPT /8" NPT Material Stainless Steel Protection IP; Safety glass; Fixed crimped case to avoid accidental dismounting Kit Number C C9 Kit Number (For Low temp) C C98 Material Kit Number HIGH FLOW SSFR COMPCT SSFR L Stainless Steel C8 C8 INSTLLTION Installation / Maintenance instructions are included with each filter/regulator ir flow direction indicated by IN/OUT as well as inlet & outlet indicators Pipe connection has standard thread according to NPT (NSI..) DIMENSIONS(mm), WEIGHT(kg) FILTER F *-MOUNTING. HOLES REGULTOR F THREDED PRESSURE-RELIEF CONNECTION(NON-RELIEF OPTION VILBLE G RELIEF TBLE: PORT SIZE ØD RELIEF TBLE: PORT SIZE ØD C *-MOUNTING. HOLES /" NPT PRESSURE GUGE CONNECTION E FILTER REGULTOR MOUNTING BRCKET 8. = 8. = 8.. D C UTO DRIN SUFFIX-D MNUL DRIN UTO DRIN WITH DPTOR (/8" NPT) SUFFIX-N G H J B F B THREDED PRESSURE-RELIEF CONNECTION (NON-RELIEF OPTION) VILBLE J RELIEF TBLE: PORT SIZE ØD *-MOUNTING HOLES C D H G /" NPT PRESSURE GUGE CONNECTION (HIGH FLOW). /8" NPT PRESSURE GUGE CONNETION (COMPCT) E R MNUL DRIN WITH PRESSURE GUGE MNUL DRIN B UTO DRIN SUFFIX-D UTO DRIN WITH DPTOR (/8" NPT) SUFFIX-N 8. = 9 = 8. PI--/R.

4 SERIES DIMENSIONS(mm), WEIGHT(kg) HIGH FLOW COMPCT Type ØD NPT / / / / / / Weight (kg). B C D E F G H J Ø.98. Ø /. 9 Ø8 * Note: Mounting hole for Hi-Flow SSFR is M in size. Mounting hole for Compact SSFR is M in size. SPRE PRTS KITS HIGH FLOW COMPCT Type ing Capacity Spare Parts Kit Number- Standard μm C9 μm C Spare Parts Kit Number- Low Temp - C C99 μm C C99 μm C C99 μm C9 C99 μm C9 C99 Option Weight (kg) uto Drain. dapter for uto Drain. Pressure Gauge. Mounting Bracket.9 PRESSURE DROP vs. IR FLOW CURVES High Flow St. steel filter /" NPT Ref. : 9 Filtration µm with P inlet bar High Flow St. steel filter /" NPT Ref. : 9 Filtration µm with P inlet bar 9 8 (NR) 8 (NR) Pi=bar Pi=.bar 8 Pi=bar dm /s Pi=bar 8 Pi=.bar Pi=bar dm /s High Flow St. steel filter /" NPT Ref. : 9 Filtration µm with P inlet bar Pi=bar 8 Pi=.bar Pi=bar (NR) dm /s High Flow St. steel filter /" NPT Ref. : 9 Filtration µm with P inlet bar Pi=bar 8 Pi=.bar Pi=bar (NR) dm /s PI--/R.

5 9 8 High Flow St. steel regulator /" NPT Ref. : P inlet b - setpoint bar 8(NR) bar 8 9 High Flow St. steel filter regulator /" NPT Ref : 8 Filtration μm with P inlet b - setpoint bar. bar bar. bar 8 bar. bar dm /s SERIES High Flow St. steel regulator /" NPT Ref. : P inlet b - setpoint bar (NR) (NR) dm /s High Flow St. steel filter regulator /" NPT Ref. : 8 Filtration μm with P inlet b - setpoint bar bar. bar. bar bar 8 bar. bar (NR) 8 9 dm /s dm /s High Flow St. steel filter regulator /" NPT Ref : 8 Filtration μm with P inlet b - setpoint bar. bar. bar bar High Flow St. steel filter regulator /" NPT Ref. : 8 Filtration μm with P inlet b - setpoint bar 9 8 (NR) (NR) 8 9 dm /s. bar bar. bar dm /s PI--/R.

6 Compact St. steel filter regulator /" NPT Ref : 8B Filtration μm with P inlet b - setpoint bar. bar bar. bar SERIES Compact St. steel filter regulator / "NPT Ref. : 89 Filtration μm with P inlet b - setpoint bar. bar 8 (NR) (NR) bar. bar dm /s dm /s PI--/R. vailability, design and specifications are subject to change without notice. ll rights reserved.