50 SERIES FILTER F50B Series F50B-04 pictured Application ANSI SYMBOL Primary air filters are designed to separate liquid, water, rust, pipe scale, an

Size: px

Start display at page:

Download "50 SERIES FILTER F50B Series F50B-04 pictured Application ANSI SYMBOL Primary air filters are designed to separate liquid, water, rust, pipe scale, an"

Annabel Johnston
5 years ago
Views:

1 FRL Products and Accessories High Flow FRL Series 50 Series Filters Series Regulators Series Pilot Operated Regulators Series Lubricators Series Filter/Regulator/Lubricator Combinations Series Filter/Lubricator Combinations Series Filter/Coalescer/Lubricator Combinations 49 43

50 SERIES FILTER F50B Series F50B-04 pictured Application ANSI SYMBOL Primary air filters are designed to separate liquid, water, rust, pipe scale, and debris from air lines.

Water is removed mechanically by the deflector which causes the air to move in a swirling motion.

Dry air passes through the sintered element utilizing depth filtration and removes debris down to specified micron size.

2 50 SERIES FILTER F50B Series F50B-04 pictured Application ANSI SYMBOL Primary air filters are designed to separate liquid, water, rust, pipe scale, and debris from air lines. They should be installed upstream of the regulator and/or lubricator to prevent contamination from reaching other components. Water is removed mechanically by the deflector which causes the air to move in a swirling motion. The condensed water droplets are then centrifugally impounded upon the ID of the bowl and fall down past the quiet zone baffle to the water sump. Dry air passes through the sintered element utilizing depth filtration and removes debris down to specified micron size. Features Metal bowl with sight glass standard Manual or automatic drain Standard output pressure PSIG Specifications Temperature Range (ºF) Temperature Range (ºC) Max. Pressure (PSIG) 250 Max. Pressure (BAR) /4 & 3/8 Weight, lbs. (kg.) 1.8 (.81) 1/2 Weight, lbs. (kg.) 2.8 (1.27) 3/4 & 1 Weight, lbs. (kg.) 6.3 (2.9) 1& 1 1/2 Weight, lbs. (kg.) 7.0 (3.2) Product Cross Section F 50 B - 08 A Model: F = Filter Element: B = 5 micron (standard) Mounting Dimensions size A B C D E 1/4 & 3/ (150) 2.50 (64).50 (13) 5.5 (140) 2.9 (74) 1/ (163) 3.25 (83).60 (15) 6.25 (159) 3.8 (97) 3/4 & (224) 4.56 (116) 1.94 (49) 7.88 (200) 4.97 (126) 1 1/ (242) 5.19 (132) 1.28 (33) 8.25 (210) 4.97 (126) 1 1/ (242) 5.19 (132) 1.28 (33) 8.25 (210) 4.97 (126) Flow Ratings model micron pipe bowl SCFM* rating size size F50B /4 5 oz. 50 F50B /8 5 oz. 70 F50B /2 8 oz. 100 F50B /4 16 oz. 186 F50B oz. 260 F50B /4 16 oz. 275 F50B /2 16 oz. 275 * Flow rates based on 100 PSIG inlet and 5# PSID 02 = 1/4 03 = 3/8 04 = 1/2 08 = 1 10 = 1 1/4 12 = 1 1/2 A = auto float drain NEED MORE PARTS AND INFORMATION? See page 119 for information on ordering replacement filters, bowls, etc. See page 101 for more information on available options. 44

50 SERIES REGULATOR R50 Series R50R-04 pictured Application Regulators are used to reduce pressure to a required working pressure.

By turning the adjustment handle clockwise, the main spring is forced onto the rubber diaphragm which, in turn, is pressed onto the valve stem.

As flow continues, the pressure begins to build and air, via the aspirator tube, fills the control chamber and forces the diaphragm upward.

Features Diaphragm-operated regulator T-handle standard Standard output pressure 0-125 PSIG Specifications Temperature Range (ºF) 40-120 Temperature Range (ºC) 4.4-46.9 Max. Pressure (PSIG) 300 Max.

3 50 SERIES REGULATOR R50 Series R50R-04 pictured Application Regulators are used to reduce pressure to a required working pressure. Utilizing optimum pressure can save companies both component life and many dollars in compressed air costs. Regulators consist of a diaphragm which floats between a main spring and a valve. By turning the adjustment handle clockwise, the main spring is forced onto the rubber diaphragm which, in turn, is pressed onto the valve stem. When the spring pressure becomes greater than the air pressure in the control chamber below the diaphragm, the valve is forced down and flow begins. As flow continues, the pressure begins to build and air, via the aspirator tube, fills the control chamber and forces the diaphragm upward. As forces balance, the small spring under the valve piston causes the valve to close. The cycle continues in a balanced process of reducing or increasing flow based upon the downstream pressure. Features Diaphragm-operated regulator T-handle standard Standard output pressure PSIG Specifications Temperature Range (ºF) Temperature Range (ºC) Max. Pressure (PSIG) 300 Max. Pressure (BAR) /4 & 3/8 Weight, lbs. (kg.) 1.8 (.81) 1/2 Weight, lbs. (kg.) 2.8 (1.27) 3/4 & 1 Weight, lbs. (kg.) 6.2 (2.8) 1 & 1 1/2 Weight, lbs. (kg.) 7.2 (3.3) Product Cross Section R 50 N - 12 GH Model: R = Regulator Style: R = relieving (standard) N = non-relieving Mounting Dimensions 02 = 1/4 03 = 3/8 04 = 1/2 08 = 1 10 = 1 1/4 12 = 1 1/2 ANSI SYMBOL size AB C D 1/4 & 3/ (157) 2.75 (70) 1.38 (35) 3.0 (76) 1/ (171) 3.75 (95) 1.47 (37) 3.56 (90) 3/4 & (265) 4.44 (113) 1.94 (49) 4.69 (119) 1 1/ (275) 5.19 (132) 1.28 (33) 8.2 (208) 1 1/ (275) 5.19 (132) 1.28 (33) 8.2 (208) Flow Ratings model pipe reduced pressure of size 25 PSIG 60 PSIG 80 PSIG R50R-02 1/ R50R-03 3/ R50R-04 1/ R50R-06 3/ R50R R50R / R50R / * Flow rates based on 100 PSIG (7 BAR) inlet and 25% PSID G = gauge H = regulator output NOTE: All BSPP (G tap) and BSPT (R tap) models use BSPT gauge threads NEED MORE PARTS AND INFORMATION? See page 119 for information on ordering replacement filters, bowls, etc. See page 101 for more information on available options. 45

50 SERIES PILOT OPERATED REGULATOR R50W Series R50W-06 pictured Application Pilot Operated Regulators are adapted for control by a remote or distant small pilot regulator.

Features High flow Reduced pressure within 5-7 PSIG of pilot pressure Relieving or non-relieving models Model: R = Regulator Style: W= all Pilot Operated Regulators 02 = 1/4 03 = 3/8 04 = 1/2 08 = 1

4 50 SERIES PILOT OPERATED REGULATOR R50W Series R50W-06 pictured Application Pilot Operated Regulators are adapted for control by a remote or distant small pilot regulator. These models are ideal for maximum capacity requirements in applications where standard models would not be readily accessible. Features High flow Reduced pressure within 5-7 PSIG of pilot pressure Relieving or non-relieving models Model: R = Regulator Style: W= all Pilot Operated Regulators 02 = 1/4 03 = 3/8 04 = 1/2 08 = 1 10 = 1 1/4 12 = 1 1/2 16 = 2 20 = 2 1/2 ANSI SYMBOL Specifications Temperature Range (ºF) Temperature Range (ºC) Max. Pressure (PSIG/BAR) 300/20.7 Min. Pilot Pressure (PSIG/BAR) 7 (.5) Max. Pilot Pressure (PSIG/BAR) 300 (20) Max. Supply Pressure (PSIG/BAR) 300 (20) 1/4 & 3/8 Weight, lbs. (kg.) 1.6 (.72) 1/2 Weight, lbs. (kg.) 2.6 (1.1) 3/4 & 1 Weight, lbs. (kg.) 5.2 (2.4) 1 1/4 & 1 1/2 Weight, lbs. (kg.) 5.6 (2.5) 2 & 2 1/2 Weight, lbs. (kg.) 15 (6.8) R 50 W - 08 N G = gauge (0-160 PSIG) N = non-relieving (not available in 2 or 2 1/2 models) NOTE: All BSPP (G tap) and BSPT (R tap) models use BSPT gauge threads NEED MORE PARTS AND INFORMATION? See page 119 for information on ordering replacement filters, bowls, etc. See page 101 for more information on available options. 46

5 Product Cross Section Diaphragm style regulator shown above. Note: 16 and 20 models are piston style regulators and not the diaphragm model shown above Flow Rates based on 100 PSI (7 BAR) inlet 50 Series Pilot Operated Regulator (02,03,04) reduced pressure air flow (SCFM) 50 Series Pilot Operated Regulator (06,08) reduced pressure 50 Series Pilot Operated Regulator (10,12) reduced pressure air flow (SCFM) 50 Series Pilot Operated Regulator (16,20) reduced pressure air flow (SCFM) air flow (SCFM) Pilot Operated Regulator Dimensions Dimensions in inches (millimeters in parenthesis) 50 Series Pilot Operated Regulator (02,03,04) size AB C D 1/4 & 3/ (86) 2.75 (70) 1.38 (35) 3.0 (76) 1/ (99) 3.25 (83) 1.47 (37) 3.56 (90) 50 Series Pilot Operated Regulator (06,08) size AB C D 3/4 & (123) 4.44 (113) 1.93 (49) 4.68 (119) 50 Series Pilot Operated Regulator (10,12) size A B C D E 1 1/4 & 5.2 (132) 4.93 (125) 1.88 (48) 4.68 (119) 5.55 (141) 1 1/2 50 Series Pilot Operated Regulator (16,20) size AB C D E 2 & 2 1/ (226) 7.31 (186) 3.09 (78) 6.63 (168) 8.0 (203) 47

50 SERIES LUBRICATOR L50 Series L50L-04 pictured Application ANSI SYMBOL Usually mounted third in the FRL Series, the lubricator is designed to inject oil aerosols into the airstream of a pneumatic

This forces oil up the siphon tube and into the integral valve/sight dome.

Features High flow Numerical adjustment Standard output pressure 0-125 PSIG Specifications Model: L = Lubricator Element: L = Standard 16 oz bowl J = 64 oz. (1.

6 50 SERIES LUBRICATOR L50 Series L50L-04 pictured Application ANSI SYMBOL Usually mounted third in the FRL Series, the lubricator is designed to inject oil aerosols into the airstream of a pneumatic circuit. As air flows from the regulator, some air is diverted from the main orifice and is allowed to flow through the fill under pressure bleed assembly and pressurize the bowl. This forces oil up the siphon tube and into the integral valve/sight dome. The oil film then drops through the valve and into the atomization chamber at a rate that is automatically proportional to the air flow. This virtually eliminates the need for readjustment. Features High flow Numerical adjustment Standard output pressure PSIG Specifications Model: L = Lubricator Element: L = Standard 16 oz bowl J = 64 oz. (1.9 liter) bowl (not available on 02, 03, or 04 models) Mounting Dimensionals Std with Lub. J option Temperature Range (ºF) Temperature Range (ºC) Max. Pressure (PSIG) Max. Pressure (BAR) /4 & 3/8 Weight, lbs. (kg.) 2.2 (1.0) - 1/2 Weight, lbs. (kg.) 3.3 (1.5) - 3/4 & 1 Weight, lbs. (kg.) 4.2 (1.9) 7.2 (3.3) size AB C D E 1& 1 1/2 Weight, lbs. (kg.) 7.5 (3.4) 10 (4.5) 1/4 & 3/ (179) 2.50 (64) 2.22 (56) 4.84 (123) 2.9 (74) 1/2 7.9 (201) 3.25 (83) 2.31 (59) 5.59 (142) 3.8 (97) Product Cross Section 3/4 & (251) 4.06 (103) 2.63 (67) 7.25 (184) 4.97 (126) 1 1/ (266) 4.81 (122) 2.84 (72) 7.63 (194) 4.97 (126) 1 1/ (266) 4.81 (122) 2.84 (72) 7.63 (194) 4.97 (126) L 50 J - 06 Q Flow Ratings model pipe size bowl size SCFM* L50L-02 1/4 5 oz. 60 L50L-03 3/8 5 oz. 90 L50L-04 1/2 8 oz. 130 L50L-06 3/4 16 oz. 300 L50L oz. 325 L50L /4 16 oz. 500 L50L /2 16 oz. 570 * Flow rates based on 100 PSIG inlet and 25% PSID 02 = 1/4 03 = 3/8 04 = 1/2 08 = 1 10 = 1 1/4 12 = 1 1/2 F = button head fill Q = lubricator autofill (not available on 02 or 03 models) NEED MORE PARTS AND INFORMATION? See page 119 for information on ordering replacement filters, bowls, etc. See page 101 for more information on available options. 48

50 SERIES COMBINATIONS N50 Series Filter/Regulator/Lubricator Filter/Lubricator Filter/Coalescer/Regulator Nippled Together N50-04FRL-R pictured N50-06FLX-R pictured N50-08FDR-R pictured N 50-08 FRL

N50-04FRL 1/2 105 F50B-04 R50R-04 L50L-04 N50-06FRL 3/4 186 F50B-06 R50R-06 L50L-06 N50-08FRL 1 260 F50B-08 R50R-08 L50L-08 N50-10FRL 1 1/4 275 F50B-10 R50R-10 L50L-10 N50-12FRL 1 1/2 275 F50B-12

N50-08FLX 1 260 F50B-08 L50L-08 N50-10FLX 1 1/4 275 F50B-10 L50L-10 N50-12FLX 1 1/2 275 F50B-12 L50L-12 Pipe Model # Size SCFM Filter Coalescer Regulator NPTF N50-02FDR 1/4 50 F50B-02 F610D-02

7 50 SERIES COMBINATIONS N50 Series Filter/Regulator/Lubricator Filter/Lubricator Filter/Coalescer/Regulator Nippled Together N50-04FRL-R pictured N50-06FLX-R pictured N50-08FDR-R pictured N FRL AFGH 02 = 1/4 08 = 1 03 = 3/8 10 = 1 1/4 04 = 1/2 12 = 1 1/2 Pipe Model # Size SCFM Filter Regulator Lubricator NPTF N50-02FRL 1/4 50 F50B-02 R50R-02 L50L-02 N50-03FRL 3/8 70 F50B-03 R50R-03 L50L-03 N50-04FRL 1/2 105 F50B-04 R50R-04 L50L-04 N50-06FRL 3/4 186 F50B-06 R50R-06 L50L-06 N50-08FRL F50B-08 R50R-08 L50L-08 N50-10FRL 1 1/4 275 F50B-10 R50R-10 L50L-10 N50-12FRL 1 1/2 275 F50B-12 R50R-12 L50L-12 Pipe Model # Size SCFM Filter Lubricator NPTF N50-02FLX 1/4 50 F50B-02 L50L-02 N50-03FLX 3/8 70 F50B-03 L50L-03 N50-04FLX 1/2 105 F50B-04 L50L-04 N50-06FLX 3/4 186 F50B-06 L50L-06 N50-08FLX F50B-08 L50L-08 N50-10FLX 1 1/4 275 F50B-10 L50L-10 N50-12FLX 1 1/2 275 F50B-12 L50L-12 Pipe Model # Size SCFM Filter Coalescer Regulator NPTF N50-02FDR 1/4 50 F50B-02 F610D-02 R50R-02 N50-03FDR 3/8 70 F50B-03 F610D-03 R50R-03 N50-04FDR 1/2 105 F50B-04 F610D-04 R50R-04 N50-06FDR 3/4 186 F50B-06 F612D-06 R50R-06 N50-08FDR F50B-08 F612D-08 R50R-08 N50-10FDR 1 1/4 275 F50B-10 F624D-10 R50R-10 N50-12FDR 1 1/2 275 F50B-12 F624D-12 R50R-12 Combination: FRL = filter / regulator / lubricator FLX = filter / lubricator FDR = filter / coalescer / regulator A = auto float drain B = 40 micron filter element D = pleated prefilter on coalescer F = lubricator button head fill G = regulator gauge H = PSIG regulator output J = 64 oz. lubricator bowl (not available on 02, 03, or 04) N = non-relieving regulator Q = auto fill lubricator (not available on 02 or 03) R = hex nipple connections U = coalescer pop-up indicator 49

8 Numatics FRL 50 Series High Flow Notes 50

12 Series Miniature FRLs

12 Series Miniature FRLs 12 Miniature FRLs www.numatics.com Table of Contents 12 Features and Benefits 3 Particulate Filter 4 Coalescing Filter 5 Regulator 6 Particulate Filter/Regulator 7 Coalescing Filter/Regulator 8 Lubricator