Your Plant Deserves Pure-Aire!

Size: px

Start display at page:

Download "Your Plant Deserves Pure-Aire!"

Georgia Robbins
5 years ago
Views:

1 Your Plant Deserves Pure-Aire! PF Series High Efficiency Filters

High Technology Filter Elements The Pure-Aire PF Series High Efficiency Unique Push-Fit, Double O-Ring Seal filter-to-head chamfered connection for ease of installation and removal.

Fiberglass Support provides pre-filtration, reduces pressure drop, and extends service life.

2 High Technology Filter Elements The Pure-Aire PF Series High Efficiency Unique Push-Fit, Double O-Ring Seal filter-to-head chamfered connection for ease of installation and removal. Filters will have a lower pressure drop throughout the filter Stainless Steel Support prevents corrosion. element life, when compared to filters using wrapped technology. Fiberglass Support provides pre-filtration, reduces pressure drop, and extends service life. Deep Bed Multi-Wrap Borosilicate Glass Microfiber prevents high pressure drop and allows for a high dirt holding capacity. Wrap tension prevents channeled air flow. Suitable for temperatures up to 248 F. Compatible with synthetic and mineral lubricants. Regular Fiberglass Support provides additional strength to the deep bed. replacement suggested for best performance Polyester Needle Felt Sleeve and energy cost unique coalescing action to quickly drain oil. Will not crush like competitive foam socks. Ultrasonically welded down length. Will not decay with age. savings. Competitive foam socks are subject to attack by synthetic lubricants, corrosives, heat, and are prone to decay. End Cap is durable and non-corrosive glass filled nylon which is attached to the element with a multi-part urethane resin. The element is then held in place by internal ribs within the filter housing. Our filter elements are also suitable for use in oil-free compressed air applications.

Regular filter element replacement every year saves money.

air system, pneumatic equipment, and finished product.

Real Dollars Example With a 200 HP air compressor running 24 hours per

10/kWh, the 3 psid lower average pressure drop of a PF Series High

3 Regular filter element replacement every year saves money. It minimizes pressure drop and ensures protection of your compressed air system, pneumatic equipment, and finished product. Protect Your Air System. Lower Your Operating Costs. Real Dollars Example With a 200 HP air compressor running 24 hours per day, at 93% motor efficiency, and an electrical cost of $0.10/kWh, the 3 psid lower average pressure drop of a PF Series High Efficiency Filter would represent an annual savings of over $3,000! A system that has three filters can save up to $9,000 per year.

Ultimate Filtration Technology Benefits and Features Accessories The PF Series offers enhanced filter

Providing a compressed air filtration solution to virtually all industrial environments.

Easy disconnect of external drain when element is changed. Hexagon on Bottom for easy bowl removal.

Internal Ribs to secure element in place and form quiet-air zone to prevent condensate re-entrainment.

drain), and 248 F temperature ratings. Automatic Internal Float Drain as standard.

Large Capacity Condensate Sump with space to install internal float drain.

Captive Piston Type O-Ring Annular Seal between head and bowl to prevent leaks.

Remote Contact DP Alarm (optional) dry contacts close at 6 psid to send a notification signal to a

Modular NPT Connections option to bolt up to three filters together with high nitrile O-ring connection

4 Ultimate Filtration Technology Benefits and Features Accessories The PF Series offers enhanced filter housing and filter element performance and reliability. Providing a compressed air filtration solution to virtually all industrial environments. Bottom Drain Adapter Plate ( scfm) Removable drain adapter for ease of float drain maintenance. Easy disconnect of external drain when element is changed. Hexagon on Bottom for easy bowl removal. Threaded Side and Bottom Drain Port for external auto or manual drain. Internal Ribs to secure element in place and form quiet-air zone to prevent condensate re-entrainment. High Quality Aluminum Construction castings 100% leak tested, 300 psig pressure (without auto float drain), and 248 F temperature ratings. Automatic Internal Float Drain as standard. External Ribs for easy service/bowl removal. Large Capacity Condensate Sump with space to install internal float drain. Flat Spot to aid bowl removal. Captive Piston Type O-Ring Annular Seal between head and bowl to prevent leaks. Only 4 to 7 Clearance Required for element removal. Remote Contact DP Alarm (optional) dry contacts close at 6 psid to send a notification signal to a bell, light, or control panel. ACME Threads offer ease of service/ bowl removal. Modular NPT Connections option to bolt up to three filters together with high nitrile O-ring connection to save space, offer ease with installation, and eliminate leaks. Delta-P Gauge (standard) two-sided DP gauge face is not pressurized. Unique magnetic sensor ensures reliability. MB - Mounting Brackets Allows convenient wall mounting of single or multiple filters. PP - Port Plates Allows for easy change from standard port size to match larger pipe size and reduce pipe fittings. Prevents costly oversizing of filters to pipe size. CK - Connecting Kits sales@pure-aire.com

Technical Technical Specifications Coalescing Filters Odor & Taste Filter Available Filter Grades Grade F H C Particle Removal 1.0 micron 0.01 micron 0.01 micron Maximum Carryover at 68 F / 20 C 0.

5 Technical Technical Specifications Coalescing Filters Odor & Taste Filter Available Filter Grades Grade F H C Particle Removal 1.0 micron 0.01 micron 0.01 micron Maximum Carryover at 68 F / 20 C 0.1 ppm 0.01 ppm ppm Recommended Temperature 100 F / 38 C 100 F / 38 C 77 F / 25 C Maximum Temperature 248 F / 121 C 248 F / 121 C 122 F / 50 C Pressure Drop (clean and dry) 1.0 psid / 70 mbar 1.5 psid / 100 mbar 1.0 psid / 70 mbar Pressure Drop (saturated) 2.0 psid / 140 mbar 3.0 psid / 210 mbar N/A Pressure Drop (change element) 6.0 psid / 400 mbar 6.0 psid / 400 mbar See Note Element Media Borosilicate Glass Microfiber Carbon Impregnated Paper F H C Particulate pre-filtration. Bulk liquid oil coalescing. Heatless desiccant dryer after-filter. High efficiency coalescing oil removal before refrigerated or desiccant dryers. Odor and taste removal. Ultra-high oil vapor removal. Maximum Working Pressure Housing Material 232 psig / 16 barg (300 psig / 20 barg without auto float drain) High Quality Aluminum Note: Activated charcoal filters must not operate in oil saturated conditions and will not remove certain types of gases including carbon monoxide and carbon dioxide. Change interval depends on application. Flow Rate Dimensions (Inches) NPT Connections Weight Filter Model scfm A B C D E In/Out Side Bottom** (lbs.) PFX-35N N/A 3/8" N/A 1/4" 1.4 PFX-75N /2" 1/4" 1/4" 5.4 PFX-85N /4" 1/4" 1/4" 5.4 PFX-170N " 1/4" 1/4" 6 PFX-250N /2" 1/4" 1/4" 12.2 PFX-340N /2" 1/2" 1/4" 12.3 PFX-500N " 1/2" 1/4" 12.3 PFX-725N " 1/2" 1/4" 14.8 PFX-1100N " 1/2" 1/4" 40.6 PFX-1400N " 1/2" 1/4" 44.1 PFX-1700N " 1/2" 1/4" 48.3 X Denotes filter grade (F, H, or C). **With internal float drain removed. PFX-35N PFX-75N to PFX-1100N to Correction Factors Operating Pressure (psig) Correction Factor For maximum flow rate, multiply model flow rate shown in the specification chart by the correction factor corresponding to the working pressure. See specifications for maximum pressure sales@pure-aire.com

MIS SERIES. Mist Eliminator. Installed differential pressure gauge and optional zero air-loss drain valve. Air or Water Cooled Aftercooler

MIS SERIES. Mist Eliminator. Installed differential pressure gauge and optional zero air-loss drain valve. Air or Water Cooled Aftercooler MIS SERIES Mist Eliminator The ircel MIS Mist Eliminator (300-8000 scfm) provides a full line of mist eliminators to effectively remove oil, solids and water from your compressed air system. In addition,