Filter Housing SG ATEX Standard
|
|
|
- Calvin Webb
- 6 years ago
- Views:
Transcription
1 Page of 7 Filter Housing SG ATX Standard The steel standard filter housings are designed for the purification of compressed air and gases in combustible environment. Due to the modular design of the housings different filter elements can be used. Product description: SG ATX standard housings are designed for the purification of compressed air and gases in an industrial operation in combustible environment. Grounding connection The flanged housings due to an optimized construction offer low differential pressures at high flow rates and as a standard equipped with an conometer and a pneumatic drain. A multitude of various housings with different connections, single or multiple, allow to match the requirements of the application, e. g. the compressor size. This product series offers different housings ranging from a volume flow of 080 m /h to 800 m /h (related to 7 bar (ü) and 0 C). The SG ATX standard housings are suitable for the application in the zones and as well as and. For gases and vapours of the group IIC only devices without conometer may be used. The SG ATX standard filter housing conforms to the requirements of the uropean directive 87/0/G for simple pressure vessels and the ATX directive. Technical Data Materials: Filter housing, G-type approval conometer: differential gauge Pneumatic drain Sealing acc. to DIN 90 Steel Plastic Aluminium Grounding connection: Graphite with sheet metal insert made of stainless steel To the avoidance of sparking due to static loading (explosion protection) Maximum Maximum Surface finish: Polyester resin Connection IN/OUT: Flange DN 0 to DN 00; DIN 008 II GD T Technical alterations reserved (R0/ 007/0/) Donaldson Filtration Deutschland GmbH Industrial Filtration Solutions Büssingstraße D-78 Haan Telefon +9/9/9-0 Telefax +9/9/9-00
2 Page of 7 Piece Industrial filter SG ATX Grounding screw Knurled nut Anchor bolt 0 Lifting eye bolt 9 Washer 8 Hexagon nut 7 Hexagon bolt Drain conometer Filter element Housing gasket Lower housing bowl Upper housing bowl 0 7,8,9 bar Volume Weight* A B C D F (l) (kg) mm mm DIN mm mm mm mm 008 7, DN , /0 0 8, DN , 0/0 09,0 0 0 DN ,7 0/0 088, 0 0 DN , 0/0
3 Page of 7 Industrial filter SG ATX 0-80 Grounding screw Knurled nut Anchor bolt 0 Lifting eye bolt Drain conomizer Filter element Housing gasket Lower housing bowl Upper housing bowl 0 7,8,9 bar Volume Weight* A B C D F (l) (kg) mm mm DIN mm mm mm mm DN x0/ DN x0/ DN x0/ DN x0/0 8 0 DN x0/ DN x0/ DN x0/ DN x0/ DN x0/0
4 Page of 7 Industrial filter SG ATX A Grounding screw Knurled nut Anchor bolt 0 Lifting eye bolt Screw plug Screw plug Filter element Housing gasket Lower housing bowl 7,8, 9 0 Upper housing bowl bar Volume Weight* A B C D (l) (kg) mm mm DIN mm mm mm DN / DN / DN / DN /0
5 Page of 7 Industrial filter SG ATX 0-80 A Grounding screw Knurled nut Anchor bolt 0 Lifting eye bolt Screw plug Screw plug Filter element Housing gasket Lower housing bowl Upper housing bowl 0 7,8, 9 bar Volume Weight* A B C D (l) (kg) mm mm DIN mm mm mm 0 77, 00 0 DN , x0/ , 80 0 DN , x0/ , DN x0/0 0 7, 0 DN ,9 x0/0 8, 0 DN , 8x0/ , 0 DN , 0x0/0 0 7, DN x0/ , DN x0/0 80 7, DN x0/0
6 Page of 7 Piece Industrial filter SG ATX S Grounding screw Knurled nut Anchor bolt 0 Lifting eye bolt 9 Washer 8 Hexagon nut 7 Hexagon bolt Screw plug conometer Filter element Housing gasket Lower housing bowl Upper housing bowl 0 7,8, 9 bar Volume Weight* A B C D (l) (kg) mm mm DIN mm mm mm DN / DN / DN / DN /0
7 Page 7 of 7 Industrial filter SG ATX 0-80 S Grounding screw Knurled nut Anchor bolt 0 Lifting eye bolt Screw plug conometer Filter element Housing gasket Lower housing bowl Upper housing bowl 0 7,8,9 bar Volume Weight* A B C D (l) (kg) mm mm DIN mm mm mm DN x0/ DN x0/ DN x0/ DN x0/ DN x0/ DN x0/ DN x0/ DN x0/ DN x0/0
Process Filtration From Pure to Sterile
rom Pure to Sterile MIN TURS & NITS: High quality stainless steel design xtremely low differential pressure Various connection types rom 60 m 3 /h up to 19.200 m 3 /h INDUSTRIS: ood & everage ngineering
Process Filtration From Pure to Sterile
Process Filtration From Pure to Sterile PF-EG 0080 0600 Multiple Housings MAIN FEATURES & BENEFITS: Standard version, etched and passivated, or Superplus version, electropolished Ra < 0,8 µm Code 7 plug
Process Filtration From Pure to Sterile
MAIN FEATURES & BENEFITS: Process Filtration From Pure to Sterile PF-EG 0003 0075 Single housings Standard version, etched and passivated, or Superplus version, electro polished Ra < 0,8 µm Code 7 plug
ARI-Strainer. Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges
Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) German TA - Luft TÜV-Test-No. 922-9204866 Grey cast iron
Cast iron Nodular iron Cast steel BR 050 Page 2. Stainless steel BR 059 Page 2. Cast steel BR 080 Page 3
Strainer ARI-Strainer ARI-Strainer Y-pattern with flanges TRB 801 No. 45 (except GG-25) Cast iron Nodular iron Cast steel BR 050 Page 2 ARI-Strainer Y-pattern with flanges TRB 801 No. 45 Stainless steel
Compressed Air Filtration
AG / SG / HD Adsorption Filter MAIN FEATURES & BENEFITS: Activated carbon filter with integrated particle filter for the retention of oil vapours, hydrocarbons and odours as well as particles from compressed
Strainer. ARI-Strainer. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with flanges. ARI-Strainer Y-pattern with butt weld ends
Strainer ARI-Strainer ARI-Strainer Y-pattern with flanges German "TA-Luft" TÜV-Test-No. 922-9204866 TRB 801 No. 45 (except cast iron) Cast iron Nodular iron Cast steel BR 050 Page 2 ARI-Strainer Y-pattern
ARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
Compressed Air Filtration
DF Depth Filter / Coalescence Filter / Particle Filter MAIN FEATURES & BENEFITS: Coalescence / particle filter for the retention of oil and water aerosols as well as particles from compressed air or gases
Compressed Air Filtration
DF Depth Filter / Coalescence Filter / Particle Filter MAIN FEATURES & BENEFITS: Coalescence / particle filter for the retention of oil and water aerosols as well as particles from compressed air or gases
/2-way piston valves
> > ort size: DN 15... 100, Flange connection, ressure rating N 40 > > djustable: Damped operation () > > Valve operates without differential pressure (Zero delta ) > > Valve piston with TFE guide-ring
Si Engineering GREAT Solutions. Process and steam safety valves to PED and DIN/EN standards
Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Si 4302 Features Engineered with high discharge The state-of-the-art IMI Bopp & Reuther medium-pressure safety valve:
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
Excess pressure regulator Excess pressure regulator, straight through DN
ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm
ARI-STEVI 440 / 441 DVGW type approval
ARI-STEVI 440 / 441 DVGW type approval Control valve in straightway form for combustible gases DIN-DVGW type approval DN 15-100 ARI-STEVI 440-G / 441-G for electric and pneumatic actuators DIN-DVGW type
10 Load and Motor Switchgear
10 Load and Motor gear Safety es 01941E00 Safety switches ensure the obligatory isolation of electrical power under condition of equipment cleaning, maintenance and repair. Other methods of isolation,
Filter module AF Features. MAHLE Industrialfiltration is now Filtration Group. For more information, visit
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Filter module AF 43 Nominal pressure 16 bar, nominal temperature 180 C; nominal width DN 80 to DN
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges TA
ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T Reversible pneumatic actuator
ARI-Strainer. ARI-Strainer - Screen and supporting basket made of stainless steel. ARI-Strainer - Y-pattern with flanges
ARI-Strainer ARI-Strainer - Screen and supporting basket made of stainless steel ARI-Strainer - Y-pattern with flanges TRB 801 Annex II No. 45 (except EN-JL1040) EN ISO 15848-1 / TA - Luft TÜV-Test-No.
Pressure reducing valve Pressure reducing valve in straightway form DN
Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
ARI-STEVI 470 / ANSI (DN25-200)
With pneumatic and electric actuators Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 - ANSI Pneumatic actuator ARI-DP 32-35 Reversible
Si Engineering GREAT Solutions. Steam Safety Valves to PED and DIN/EN standards
Engineering GREAT Solutions Steam Safety Valves to PED and DIN/EN standards Engineered specific for HP steam application Features The IMI Bopp & Reuther high pressure steam safety valve: > Solid inlet
/2-way piston valves
> > ort size: DN 15... 100 Flange connection, ressure rating N 40 > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > djustable: Damped operation () > > Valve piston
Compressed Air Filtration
Oil/ Water Separator Ultrasep Superplus MAIN FEATURES & BENEFITS: A coalescing filter improves oil separation for longer compliance with legal discharge limits Sizing, long residence time ensures excellent
ARI-STEVI 448 / 449 (DN15-100) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators
ARI-STEVI 8 / 9 (DN5-00) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators ARI-STEVI 8 / 9 Pneumatic actuator ARI-DP 30-3 Reversible pneumatic actuator Actuator
Introduction. Operation FTG 600
Introduction FTG 600 impurity filters are used in all situations that require the filtration of natural gases (gas regulating and metering stations, delivery stations) and have the role of retaining the
ARI-Strainer PN63-160
ARI-Strainer PN63-160 ARI-Strainer - Screen of stainless steel DN 10-100 ARI-Strainer - Straight through with flanges TRB 801 Annex II No. 45 Cast steel Forged steel High temp. Steel Fig. 050 Page 2 +
Automatic filter AF 112 G
Automatic filter AF 112 G Cast design with internal pressure cleaning and integrated cyclone effect Connection size: flange DN 40 or G1 1/2 1 Short description MAHLE automatic backflush filters are suitable
Si Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Features Typical regular safety valve for many applications The modern pressure safety valve for regular
ARI-STEVI 423 / 463 (DN ) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
ARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 47 (DN5-50) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 47 Pneumatic actuator
KLINGER. Instructions for installation and operation of. Reflex level gauges K D asbestos-free. wt 3017/11 Page 1.
Page 1 Instructions for installation and operation of KLINGER Reflex level gauges K D asbestos-free Edition: 06/2003 Fluid Control GmbH Am Kanal 8-10 A-2352 Gumpoldskirchen/AUSTRIA Telefon:++43(0) 2252
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
ARI-STEVI 470 / ANSI (DN25-200)
ARI-STEVI 470 / 471 - ANSI (DN25-200) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem With pneumatic and electric actuators ARI-STEVI 470 / 471 - ANSI
Si Engineering GREAT Solutions. Process and steam safety valves to PED and DIN/EN standards
Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Features Basic valve for low pressure Cost-efficient IMI Bopp & Reuther low pressure safety valve: > Semi nozzle
Automatic metal-edge filters AF 72 G
Automatic metal-edge filters AF 72 G with radial scraper cleaning Connection size G1 1/2, flange DN 40 1 Short description MAHLE automatic metal-edge filters are suitable for all applications where low
KSI Filtertechnik GmbH Siemensring D Willich Tel Fax
BA SIC.LINE Rev 1.0.1 Page 1 of 9 KSI Filtertechnik GmbH Siemensring 54-56 D-47877 Willich Tel. +49 21 54 89 108-0 Fax +49 21 54 89108-282 www.ksi.eu mail@ksi.eu ECOCLEAN Compressed air filters new generation
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
Automatic metal-edge filter AF 71 G
Automatic metal-edge filter AF 71 G with radial scraper cleaning Connection size G1 1 Features MAHLE automatic metal-edge filters are suitable for all applications where low or high-viscosity liquids or
Your Plant Deserves Pure-Aire!
Your Plant Deserves Pure-Aire! PF Series High Efficiency Filters High Technology Filter Elements The Pure-Aire PF Series High Efficiency Unique Push-Fit, Double O-Ring Seal filter-to-head chamfered connection
Globe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
ARI-Check valve. ARI-Check valve, metallic sealing. ARI-Check valve - Straight through with flanges. ARI-Check valve - Straight through with flanges
ARI-Check valve, metallic sealing Straight through with flanges (except EN-JL1040) Grey cast iron SG iron Cast steel Fig. 003/303 Page 2 Straight through with flanges Straight through with flanges Angle
FILTER, REGULATOR AND FILTER/REGULATOR stainless steel 316L compact 1/4, high flow 1/4-1/2
FILTER, REGULATOR AND FILTER/REGULATOR stainless steel L compact /, high flow / - / Air Preparation Series FEATURES Stainless Steel, and intended for corrosive environment and suitable for use in potentially
STEVI 450 / way control valve in mixing and diverting design DN
STEVI 450 / 451 with electric and pneumatic actuators 3-way control valve in mixing and diverting design DN 15-150 STEVI 450 / 451 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel
Automatic metal-edge filter AF 73 G/AF 93 G
Automatic metal-edge filter AF 73 G/AF 93 G with radial scraper cleaning Connection size G2, screw-in flange DN 50 and DN 65 1 Features MAHLE automatic metal-edge filters are suitable for all applications
Operating Instructions. VEGASWING 61, 63 with oscillator SW E60N (EX)
Operating Instructions VEGASWING 61, 63 with oscillator SW E60N (EX) Contents Contents Safety information... 2 Note Ex area... 2 1 Product description... 3 2 Function and application... 4 2.1 Principle
Compressed Air Filtration
DF dsorption Filter MIN FETURES & BENEFITS: ctivated carbon filter with integrated particle filter for the retention of oil vapours, hydrocarbons and odours as well as particles from compressed air or
Pneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
GERMAN QUALITY VALVES
The pneumatic Y-pattern process valve: Up to 31% energy saving Excellent value for money Convenient handling Reliable even at high differential pressures: Stays tight for up to 1,000,000 cycles! NEW from
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
Globe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
APOVAC R Vacuum Systems
APVAC R Vacuum Systems with closed ring-liquid loop for the suction and recovery of gases and vapours APVAC = Anti Pllution VACuum PED APVAC R APVAC Vacuum systems with closed ring-liquid loop for the
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
Si 6303 / Si 6304 / Si 6305
Si 6303 / Si 6304 / Si 6305 Engineering GREAT Solutions Process and steam safety valves to PED and DIN/EN standards Si 6303 / Si 6304 / Si 6305 Si 6303 / Si 6304 / Si 6305 Features Engineered for high
PN63 - PN160. ARI-STOBU PN Stuffing box valve. Stop valve with gland seal - metallic sealing. ARI-STOBU - Straight through with flanges
Stuffing box valve Stop valve with gland seal - metallic sealing ARI-STOBU - Straight through with flanges PN63 - PN160 Forged steel High temperature steel Fig. 006 Seite 2 ARI-STOBU - Straight through
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3535 Three-way Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Mixing or diverting valves for heat transfer applications using organic
Safety Switches Series 8537
Safety Switches www.stahl.de > 3- and 6-pole switches 12 / 16, 25, 40, 63 / 80, 125 / 160, 250, 315, 400, 500 A > Motor switching capacity AC-3 and AC-23 acc. to IEC 60947-3, EN 60947, DIN VDE 0660 part
ARI-ZETRIX ANSI. with worm gear. with electric rotary actuator Auma or Schiebel. with pneumatic actuator. with hydraulic actuator
Process valve - Fig. 016 - Double flanged process valve with metallic sealing - Triple offset - Fig. 018 - Fully lugged process valve with metallic sealing - Triple offset - Fig. 019 - Butt weld ended
Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250
with electric and pneumatic actuators Control valve - 3-way with flanges (3-way mixing valve / 3-way diverting valve) DN 200 and 250 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel
JDN AIR CRANES AND CRANE KITS FOR EXPLOSION PROOF APPLICATIONS
JDN AIR CRANES AND CRANE KITS FOR EXPLOSION PROOF APPLICATIONS CONTENT JDN AIR CRANES................................. 4 EXPLOSION PROOFNESS CLASSIFICATION AND MARKING........................ 4 ADVANTAGES
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
All items with the Dust Ex symbol are suitable for use in hazardous dust areas, in zones 20, 21 and 22.
Accessories All items, both with and without the Ex symbol, are suitable for standard cleaning requirements. All items with the Dust Ex symbol are suitable for use in hazardous dust areas, in zones 20,
Lined Butterfly Valve Pfeiffer Type BR 10a
Lined Butterfly Valve Pfeiffer Type BR 10a Application Tight closing, double eccentric butterfly valve with PTFE lining for process engineering and plants with industrial requirements, especially suitable
Control Valve with integrated positioner
Control Valve 8021 with integrated positioner GS 1 series DN 15 up to DN 150 Pneumatic control valve for the control of neutral through to highly aggressive media in process engineering, chemical industries
PN63 - PN160. with electric and pneumatic actuators. Control valve in straightway form with flanges and butt weld ends (shoed ends) DN
with electric and pneumatic actuators Control valve in straightway form with flanges and butt weld ends (shoed ends) DN 15-100 PN63 - PN160 ARI-STEVI 472 Electric actuator ARI-PREMIO Enclosure IP 65 2
GROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
with electric actuators Feedwater control valve with pump spill back DN
ARI-STEVI 453 with electric actuators Feedwater control valve with pump spill back DN 25-100 ARI-STEVI 453 Electric actuator ARI-PREMIO 2,2-15 kn ARI-PREMIO-Plus 2G 2,2-15 kn Enclosure IP 65 2 torque switches
Process Filtration From Pure to Sterile
From Pure to Sterile MAIN FEATURES & BENEFITS: High mechanical and thermal stability Excellent flow rate Integrity testable according to HIMA Thermal stability up to 200 C Approved for Food Contact Use
Solenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO 2858 / DIN EN 22858
Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO 2858 / DIN EN 22858 Hermetical Standard Chemical Pump of PTFE / PFA with permanent magnet synchronous motor ISO
Cast iron Nodular iron BR 006/306 Page 2. BR 006/306 Page 2. Forged steel BR 006 Page 3. Stainless steel BR 006 Page 3. Forged steel BR 005 Page 5
ARI-STOBU - Stop valve with gland seal STOBU Stop valve with gland seal ARI-STOBU Globe valve with flanges TRB 801 No.45 (except cast iron) ARI-STOBU Globe valve with flanges TRB 801 No.45 Test approvals
Automatic filter AF 172 G
Automatic filter AF 172 G with external pressure cleaning and integrated cyclone effect Connection sizes: DN 40/G1 1/2, cast design 1. Short description MAHLE automatic backflush filters are suitable for
Filters MS-LFM/LFX, MS series, NPT
Filters MS-LFM/LFX, MS series, NPT Peripherals overview 5 3 4 1 -H- Note Other accessories: Module connector for combination with size MS6, MS9 or MS12 Internet: rmv, armv 2 1 2/3/4/5 2/3/4/5 6 Mounting
Automatic filter AF 173 G
Automatic filter AF 7 G with external pressure cleaning and integrated cyclone effect Connection sizes: G, screw-in flange DN 0 and DN, cast design Short description MAHLE automatic backflush filters are
Flame arresters 4301A/4319A ATEX Approved
Flame arresters 4301A/4319A ATEX Approved The Whessoe Vapour Control range of flame arresters are designed and certified for use in conjunction with Whessoe pressure and vacuum valves, as well as for use
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 ARI-STEVI 423 Electric actuator ARI-PREMIO
with electric and pneumatic actuators Control valve in 3-way-form (3-way mixing valve) DN 300 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches Handwheel Additional devices available, e.g.
FlowPak TM General Application Valve DN , PN 10 / 40
FlowPak TM General Application Valve DN 15 -, PN / SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and our standard Positioner facililates
Automatic metal-edge filter AF 75 S / AF 95 S
Automatic metal-edge filter AF 75 S / AF 95 S with radial scraper cleaning housing in welded design, optionally with cyclone effect Connection size DN 150, DN 200, DN 250 others upon request 1. Features
ARI-STEVI BBD 415 (DN25-50) Straight through blow down valve
With pneumatic actuator ARI-STEVI BBD 415 (DN25-50) Straight through blow down valve ARI-STEVI BBD 415 Pneumatic actuator Required air supply pressure max. 6 bar Options: - Assembly of additional devices
VALFONTA USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1
USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1 CONTROL VALVE MODEL C1 - Operation and Installation - 1 - manual C1-13B-ENG.doc JANUARY 2014 INDEX PAGE 1 IDENTIFICATION PLATE
* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
Condensate Drain Valve AK 45. Original Installation Instructions English
Condensate Drain Valve AK 45 EN English Original Installation Instructions 810467-03 1 Contents Important Notes Page Usage for the intended purpose...4 Safety note...4 Danger...4 Attention...4 PED (Pressure
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - D D S T R B U T O N S with metal EJ enclosures for gases in explosion group B Apparatus which gives off arcs or sparks can be integrated in distributions at low cost using flameproof enclosures.
Control Device System NEC Series ConSig 8040
16113E00 > Enclosure made of glass fibre reinforced polyester resin > Modular design > 3 sizes available > Individual units can be combined into larger units > Standard and customer-specific versions >
Automatic filter AF 113 G
Automatic filter AF 113 G Cast design with internal pressure cleaning and integrated cyclone effect Connection sizes: G2, screw in flange DN 50 and DN 65 1 Short description MAHLE automatic backflush filters
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
High Temperature Valve 8024
High Temperature Valve 8024 with integrated positioner GS 3 series DN15 up to DN250 Pneumatic control valve with integrated positioner for the control of neutral through to highly aggressive media Space
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
Process Filtration From Pure to Sterile
From Pure to Sterile MAIN FEATURES & BENEFITS: High dirt holding capacity at low differential pressure and high flow rate Highly durable stainless-steel design Regenerable by ultrasonication or back flushing
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
Materials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
Table of contents. Technical informations > ATEX Page Technical informations Page Mechanically operated valves Page 13-06
Technical informations > Table of contents ATEX Page 13-02 Technical General informations information Page 13-02 Mechanically operated valves Page 13-06 Pneumatically operated valves Page 13-06 Electrically
FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2
FILTER, REGULTOR ND FILTER/REGULTOR Stainless Steel L Compact /, High Flow / - / FETURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment and suitable for use in
Oriflow. Compact Orifice with HART communication. Operating instructions. A-EN RevC Latest Mod von 16
Compact Orifice with HART communication Oriflow Operating instructions Bopp & Reuther Messtechnik GmbH Am Neuen Rheinhafen 4 67346 Speyer - Germany Phone +49 (621) 657-0 Fax +49 (621) 657-505 http://www.bopp-reuther-mt.de