F64G. Typical flow with 40 µm element at 90 psig (6.3 bar) inlet pressure and a 5 psig (0.35 bar) pressure drop. F64G- N - D 1/4 2 3/8 3 1/2 4 3/4 6

Transcription

1 Olympian Plus eneral Purpose Filter F, FE eneral purpose filters Olympian Plus plug in system Effective liquid removal and positive solid particle filtration Large filter element area provides minimum pressure drop Optional visual service indicator turns from green to red when the filter element needs to be replaced Factory option electrical service life indicator provides electrical output when the filter element needs to be replaced IR LIE EQUIPMET Fluid: Compressed air Series Maximum pressure uarded transparent bowl: 15 (1 bar) Metal bowl: 5 (17 bar) uarded transparent bowl: -3 to 15 F (-3 to 5 C) Metal bowl: -3 to 175 F (-3 to C) Series Maximum pressure: 5 (17 bar) to +175 F (- to + C) * ir supply must be dry enough to avoid ice formation at temperatures below +35 F (+ C). Materials F Body: Zinc Yoke: Zinc Metal bowl: luminum Standard metal bowl prismatic liquid level indicator lens: rilamid Optional metal bowl sight glass: Pyrex Optional transparent bowl: Polycarbonate Element: Polypropylene Elastomers: itrile FE Body: luminum Yoke: luminum Bowl: luminum Liquid level indicator: Pyrex Element: Sintered bronze or polypropylene Elastomers: itrile Models listed are with threads, metal bowl with sight glass, automatic drain, and µm element. Port Size Model Flow scfm (dm3/s) Weight lb (kg) 1/" F--D3 15 (59).91 (1.3) 1" FE--U3 3 (19) 5.1 (.33) Options selector (F) 1/ 3/ 3 1/ 3/ o yoke ISO parallel o yoke F- - D Options selector (FE) FE- - 3/ 1 1-1/ 1-1/ B o yoke ISO parallel o yoke Service life indicator Mechanical Electrical Without D E F FE Typical flow with µm element at 9 (.3 bar) inlet pressure and a 5 (.35 bar) pressure drop. Element 5 µm 1 µm 3 Drain Manual uto drain Element 5 µm 1 5 µm 3 Bowl 1 qt C 1 qt with liquid level indicator U Drain Manual, 1/ turn uto drain ISO Symbols Q Q LE- uto Drain Manual Drain

2 ccessories Olympian Plus eneral Purpose Filter F, F eneral purpose filters Dimensions in inches (mm) Bracket kit Bracket kit 3/ Shut-off valve Single Yoke Double Yoke Service Kit & elements F 1/ 75-5 TE-B-P1 Y--1 Y-- F Seal & gasket 3-3/ 75-5 TE-3B-P1 Y-3-1 Y-3- Filter element 5 µm / 75-5 TE-B-P1 Y--1 Y-- Filter element µm 33-3/ 75-5 TE-B-P1 Y--1 Y-- F Seal & gasket 3-3 F 1/ TE-B-B Y--1 Y-- Element 5 µm (1 quart bowl) / TE-B-B Y--1 Y-- Element 5 µm (1 quart bowl) TE-B-B Y--1 Y-- Element µm (1 quart bowl) / TE-B-B Y--1 Y-- Element 5 µm (1 quart bowl) / TE-BB-B Y-B-1 Y-B- Element µm (1 quart bowl) FE 7. (19)**.13 (5) 1 Quart US (1 Liter) Bowl 1. () * 1.73 (). (1). utomatic Drain 1. ()* 17. (5) Manual Drain *Dimension also applies to closed bottom bowl. ** For 1-1/" and 1-1/" ported yokes, add.39" (1 mm). Minimum clearance required to remove bowl. 1. (5) Typical Performance Characteristics FLOW CHRCTERISTICS PORT SIZE: 1/" µm ELEMET ILET PRESSURE - (bar g) 1 dm 3 /s IR FLOW.13 (15)* 1. (37) 1. (3).91 (7) 1. (9) 1/ Turn Manual Drain F bar d F (.5) (.) (.3) (.) (1.) 1 1 scfm IR LIE EQUIPMET Typical Performance Characteristics F FLOW CHRCTERISTICS 1. (37) bar d PORT SIZE: 1" µm ELEMET ILET PRESSURE - (bar) (.5) (.) (.3) (.) (1.) 1 3 scfm 1 1 dm 3 /s.5 (17) utomatic Drain.5 (1) 9.1 (3) *.1" (157 mm) for 3/" models Minimum clearance required to remove bowl. 7.5 (179) 1/ Turn Manual Drain IR FLOW LE-1

3 Olympian Plus Oil Removal (Coalescing) Filter FC/H, FC/H Olympian Plus plug in design High efficiency oil and particle removal Quick release bayonet bowl High visibility prismatic sight glass Coalescing element service indicator Install a pre-filter with a 5 µm filter element upstream of the filter for optimum coalescing element life. IR LIE EQUIPMET Fluid: Compressed air Maximum pressure: 5 (17 bar) uarded transparent bowl: 15 (1 bar) to +15 F (- to +5 C) uarded transparent bowl: -3 to 15 F (-3 to 5 C) * ir supply must be dry enough to avoid ice formation at temperatures below +35 F (+ C). Materials Body: luminum Yoke: luminum Bowl: luminum Liquid level indicator: Pyrex Element: Synthetic fiber and polyurethane foam Elastomers: itrile Service life indicator: Body: Transparent nylon Internal parts: cetal Spring: Stainless steel Elastomers itrile Models listed are with threads, metal bowl with sight glass, service indicator, and automatic drain. Port Size Model Maximum Flow* scfm ( dm3/s) Weight lb (kg) 1 " FC-D-D 3 (1) 3. (1.) 1 " FH-D-D () 3. (1.7) 3 " FH-D-D ().3 (.1) 1/ (Standard flow, short element) FC-D-R 1/" ports: 7 (35) 5.19 (.3) 3/ (High flow, long element) FH-D-U 3/" ports: 7 (35) 5.5 (.) 1 (High flow, long element) FH-D-U 1" ports: 17 () 5.7 (.) * Maximum flow at 9 to maintain stated oil removal performance. Options selector (FC/H) F - D - Body size Standard flow High flow C H 1/" 3/" 3 1/" 3/" ISO parallel FC/H FC/H Bowl Metal with liquid level indicator Transparent with guard Drain Manual, 1/ turn uto drain D P Q utomatic and Semi utomatic Drain ISO Symbols Manual Drain Options selector (FC/H) F - D - Flow Standard flow C High flow H 3/" 1 1-1/ 1-1/ B ISO parallel Bowl 1 pt with liquid level indicator R* 1 qt with liquid level indicator U** Drain uto drain Manual (1/ turn) * Only available with FC ** Only available with FH Q LE-

4 ccessories Olympian Plus Oil Removal (Coalescing) Filter FC/H, FC/H Dimensions in inches (mm) Bracket kit Bracket kit 3/ Shut-off valve Single Yoke Double Yoke Elements FC/FH 1/ 75-5 TE-B-P1 Y--1 Y-- F (pre-filter) 5 µm / 75-5 TE-3B-P1 Y-3-1 Y-3- FC Coalescing 3-1 1/ 75-5 TE-B-P1 Y--1 Y-- FH Coalescing 3-3/ 75-5 TE-B-P1 Y--1 Y-- FC/FH 1/ TE-B-B Y--1 Y-- Standard flow (FC) / TE-B-B Y--1 Y-- High flow (FH) TE-B-B Y--1 Y-- FC/H.13 (15) Service Indicator 1. (37).91 (7) 1.9 (57) 1. (37) 7.1 (1).3 (59) 1. (5) FC, utomatic Drain.1" (157) for 3/" ports. Minimum clearance required to remove unit. FC/H Standard Visual Service Indicator 1 Pint US (.5 Liter) Bowl 1.19 (31) * 7.5 (179) FC, 1/ Turn Manual Drain 1.73 ().19 ()* 3.11 (79) 13. (35) 1. (31) FH, utomatic Drain 7. (197) 1. (31) 9.7 (3) 1. (31) 9.1 (3) FH, 1/ Turn Manual Drain. () FC/H IR LIE EQUIPMET FLOW CHRCTERISTICS.13 (5) Standard Visual Service Indicator 1 Quart US (1 Liter) Bowl 1.19 (3) *. (1). utomatic Drain 7. (19) 1.73 () 1.59 (9)* 3.11 (79) 17. (5) Manual Drain 1. (5) 1. (3) 1/ Turn Manual Drain 1. (9) bar d..... bar d 1.. PORT SIZE: 1/" DRY ELEMET 1 ILET PRESSURE - (bar) (.5) (.) (.3) (.) (1.) 1 1 scfm 1 dm 3 /s IR FLOW FLOW CHRCTERISTICS PORT SIZE: 1" DRY ELEMET ILET PRESSURE - (bar) (.5) (.) (.3) (.) (1.). (1). utomatic Drain Manual Drain 1/ Turn Manual Drain For optional electrical service life indicator, add." (5 mm). * Dimension also applies to closed bottom bowl. Minimum clearance required to remove bowl scfm 1 1 dm 3 /s IR FLOW LE-3

5 Olympian Plus Oil Vapor Removal Filter FB/L, FV/Y Olympian Plus plug in system dsorbing type activated carbon element removes oil vapors and most hydrocarbon odors Long service life of filter element. Minimum life of hours when the required oil removal filter is installed upstream and the filtration temperature is between 7 to F ( to C). Oil and dirt contamination in outlet air within ISO 573-1: Quality Class F V/Y inlet air must be prefiltered with an F and F C/H IR LIE EQUIPMET Fluid: Compressed air Maximum pressure: 5 (17 bar) uarded transparent bowl: 15 (1 bar) to +15 F (- to +5 C) uarded transparent bowl: -3 to 15 F (-3 to 5 C) * ir supply must be dry enough to avoid ice formation at temperatures below +35 F (+ C). Maximum remaining oil content:.1 mg/m 3 at +7 F (+ C) with an inlet concentration of 17 mg/m 3. Materials Body: F- Zinc, F-luminum Yoke: F- Zinc, F-luminum Bowl: F- Zinc, F-luminum Elastomers: itrile Service Kits: F B/L 3-1 FV/Y 3-3 uto Drain ISO Symbols Manual Drain Models listed are with threads, and metal bowl. Port Size Model Maximum flow* Weight lb (kg) scfm (dm 3 /s) 1 " FB--R 15. (7.).7 (1.3) 1 " FL--R 3.3 (11.) 5.5 (.5) 3 " FL--R 3.3 (11.). (.) Standard flow (short element) FV--EM 53 (5) 5.13 (.33) High flow (long element) FY--EC 17 () 5.7 (.59) Options selector (FB/L) F - - O Body size Standard flow B High flow L 1/" 3/" 3 1/" 3/" ISO parallel one FB/L *Maximum flow at 9 (.3 bar) inlet pressure to maintain stated oil removal performance. Options selector (FV/Y) F - - E Body size Standard flow V High flow Y 1/" * 3/" 1" one ISO parallel one Bowl Metal with liquid level indicator Transparent Drain Manual uto drain FV/Y R T M Bowl 1 pint (.5 liter) M* 1 quart (1 liter) C** Only available with FV ** Only available with FY LE-

6 Olympian Plus Oil Vapor Removal Filter ccessories Bracket kit Bracket kit 3/ Shut-off valve Single Yoke Double Yoke Replacement Elements FC/H, FV/Y Dimensions in inches (mm) FV/Y.13 (5) 13.5 (33) 1. (37). (1).13 (15)** 7.5 (19) 1.73 () 1 Pint US (.5 Liter) Bowl Minimum clearance required to remove bowl. FB/L 7. (19)..91 (7) FB/FL 1/ 75-5 TE-B-P1 Y--1 Y-- F (pre-filter) 5 µm / 75-5 TE-3B-P1 Y-3-1 Y-3- FB Coalescing / 75-5 TE-B-P1 Y--1 Y-- FL Coalescing / 75-5 TE-B-P1 Y--1 Y-- Integral pre-filter (FB/L) 39- ctivated carbon (FB/L) 55-1 FV/Y 1/ TE-B-B Y--1 Y-- Standard Flow (FV) 5-7 3/ TE-B-B Y--1 Y-- High Flow (FY) TE-B-B Y--1 Y (5). (1). 9.9 (51) 1 Quart US (1 Liter) Bowl 1.73 () Mounting bracket (FB/L).3 (11) 3.3 (5) 3.7 (93) 1.9 () 1.(31).3 (.). ().11 (.).57 (1.5) 5. (13).5 (11) Mounting bracket (FV/Y) IR LIE EQUIPMET. (13). (13). (7) 7.19 (19).59 (15) (3) 11.3 ()* 13.3 (33) 1. (3)* 3.9 (1) 1.97 (5) 7. (19)*.19 ()*.33 (.5) * dd.39" (1) for 1-1/" ported yokes. *utomatic drain shown. Subtract.3" (mm) for manual drain. Minimum clearance required to remove bowl. **.1 (157 mm) for models with 3/" ports. LE-5

7 Olympian Plus Filter/Regulators B, BE/ IR LIE EQUIPMET Olympian Plus plug in system Effective liquid removal and particulate filtration Large filter element area provides minimum pressure drop High flow unit with large valve and diaphragm Push to lock adjusting knob with tamper resistant option Fluid: Compressed air B Maximum pressure uarded transparent bowl: 15 (1 bar) Metal bowl: 5 (17 bar) Operating temperature* uarded transparent bowl: -3 to 15 F (-3 to 5 C) Metal bowl: -3 to 175 F (-3 to C) BE/ Maximum pressure : 5 (17 bar) to +175 F (- to + C) * ir supply must be dry enough to avoid ice formation at temperatures below +35 F (+ C). Particle removal: 5, or µm. Within ISO 573-1, class 3 and Class 5 Materials B Body: Zinc Bonnet: luminum Yoke: Zinc Metal bowl: luminum Standard metal bowl prismatic liquid level indicator lens: rilamid Optional metal bowl sight glass: Pyrex Optional transparent bowl: Polycarbonate Element: Sintered polypropylene Elastomers: itrile BE/ Body: luminum Yoke: luminum Bonnet: luminum djusting knob: cetal resin Optional T-bar adjusting screw: Steel Valve: luminum Bowl: luminum Sight glass: Pyrex Element: Sintered bronze or polypropylene Elastomers: itrile B BE/ Models listed are with threads, metal bowl with automatic drain, and µm element. Port Size Model Flow scfm (dm3/s) Weight lb (kg) Replacement elements 1/" B-K-D3-RM 5 (1) 3.9 (1.) µm 1" BE-K-U3-RL (15). (.) 33- µm 1-1/" BE-K-U3-RL (15). (.9) 1qt 5 µm /" BE-BK-U3-RL (15).7 (.7) 1qt µm Options selector B- - -R Port Size auge 1/" With 3/" 3 Without 1/" Outlet Pressure 3/" djustment Range* 5 to (.3 to bar) F 5 to 15 (.3 to 1 bar) M ISO parallel 1 to 5 (.7 to 17 bar) S** djustment Element Knob K 5 µm 1 T-bar T µm 3 Drain 1/ turn manual Q Bowl utomatic Metal with liquid level indicator D * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** Units with 5 (17 bar) adjustment range are available only with the T-bar adjustment; therefore substitute T at the 7th digit and S at the 1th position. Options selector BE- - U -R Bowl/Element Type 1 quart (1 liter) bowl w/long element E 1 pint (.5 liter) bowl w/short element Port Size 3/" 1" 1-1/" 1-1/" B ISO parallel o Yoke ( in 5th position) 1/ Rc threaded gauge ports o Yoke ( in 5th position) threaded gauge ports djustment Knob K T-bar T Drain utomatic Manual, 1/ turn Q uarded Transparent auge With Without Outlet Pressure djustment Range* to ( to bar) F 5 to 1 (. to bar) L 1 to 5 (.7 to 17 bar) S*** Element 5 µm 1 µm 3 utomatic Drain Relieving ISO Symbols Manual Drain Relieving Only available with BE * Outlet pressure can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** Typical flow with 15 (1 bar) inlet pressure, 9 (.3 bar) set pressure and a 15 (1 bar) droop from set. *** Units with 5 (17 bar) adjustment range are available only with the T-bar adjustment; therefore substitute T at the 7th digit and S at the 1th position. P LE-

8 ccessories Olympian Plus Filter/Regulators Bracket kit Bracket kit auge 3/ Shut-off valve* Single Double Tamper Service Kit to 1 yoke yoke resistant kit B, BE/ Dimensions in inches (mm) B TE-B-P1 1/ Y--1 Y Relieving 33- TE-3B-P1 3/ Y-3-1 Y on-relieving 33-1 TE-B-P1 1/ Y--1 Y TE-B-P1 3/ Y--1 Y B / TE-B-B 3/ Y--1 Y Relieving TE-B-B 1 Y--1 Y on-relieving / TE-B-B 1-1/ Y--1 Y TE-BB-B 1-1/ Y-B-1 Y-B * Series uses a ball handle. Mounting bracket (B).3 (11) 3.3 (5) 3.7 (93) 1.9 () 1.(31).3 (.) 1. (37). () B.11 (.).57 (1.5) 5. (13).5 (11).13 (15)**.91 (7) Typical Performance Characteristics B OUTLET PRESSURE bar g 1 FLOW CHRCTERISTICS PORT SIZE: 1/" µm ELEMET ILET PRESSURE: 15 (1 bar) RE: 5 to 15 (.3 to 1 bar) 1 1 scfm 1 dm 3 /s IR FLOW BE/.13 (5) 7. (19)** BE/ OUTLET PRESSURE bar g 1 1 FLOW CHRCTERISTICS PORT SIZE: 1", ELEMET: µm ILET PRESSURE: 15 (1 bar) RE: 5 to 1 (. to bar) 1 3 scfm 1 1 dm 3 /s IR FLOW Mounting bracket (B).3 (7) 3.9 (1) 1.97 (5) 7. (19)*.59 (15).33 (9) IR LIE EQUIPMET 7. (19)*.19 ()* 1. (31).9 (15) (35) 1. (3) (3) 1 Quart US (1 Liter) Bowl 17.5 (5) * 9.9 (51)* 5.3 (135) 1.1 (3) 1.59 (9) 1. (3) 1. (9) **.13 (15) for 1/", 3/", and 1/" ported yokes..1" (157) for 3/" ported yokes. dd 1. (37) for units with T-handle adjustment. Minimum clearance required to remove unit. dd 1. (37) for units with T-handle adjustment.. (1). utomatic Drain Manual Drain 1/ Turn Manual Drain dd 1." (37 mm) for unit with T-bar adjustment. * Dimension also applies to closed bottom bowl. ** For 1-1/" and 1-1/" ported yokes, add.39" (1 mm). Minimum clearance required to remove bowl. LE-7

9 Olympian Plus Regulators R/R, R Olympian Plus plug in design High flow general purpose regulator Push to lock adjusting knob with tamper resistant option Mount in any orientation IR LIE EQUIPMET R/R Maximum pressure: 5 (17 bar) Typical flow at 15 (1 bar) inlet pressure, 9 (.3 bar) set pressure and a droop of 15 (1 bar) from set: 5 scfm (1 dm3/s) -3 to 175 F (-3 to C) R Maximum pressure: 3 ( bar) Typical flow at 15 (1 bar) inlet pressure, 9 (.3 bar) set pressure and a droop of 15 (1 bar) from set (): 37 scfm (17 dm3/s) to +175 F (- to + C) * ir supply must be dry enough to avoid ice formation at temperatures below +35 F (+ C). Materials R/R Body: Zinc Bonnet: luminum Yoke: Zinc Elastomers: itrile R Body: luminum Yoke: luminum Bonnet: luminum djusting knob: cetal resin Valve: luminum Optional T-bar adjusting screw: Steel Elastomers: itrile R R/R Models listed are with threads, knob adjustment, relieving type, with gauge (not shown). Port Size Model Flow scfm (dm3/s) Weight lb (kg) 1/" R-K-RM 5 (1) 3.31 (1.9) 1" R-K-RL 3 (17).1 (1.9) 1-1/" R-K-RL 3 (17). (1.93) 1-1/" R-BK-RL 3 (17).33 (1.97) Typical flow with 15 (1 bar) inlet pressure, 9 (.3 bar) set pressure and a 15 (1 bar) droop from set. Options selector (R) R - - R Flow type Standard 1/" 3/" 3 1/" 3/" ISO parallel djustment Knob T-bar K T Options selector (R) R- - R 3/" 1" 1Ê" 1Ë" B one ISO parallel o Yoke ( in 5th position) 1/ Rc threaded gauge ports o Yoke ( in 5th position) threaded gauge ports djustment Knob T-bar K T auge With Without Outlet pressure adjustment range* 5 to (.3 to bar) F 5 to 15 (.3 to 1 bar) M 1 to 5 (.7 to 17 bar) S** * Can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** Units with 5 outlet pressure range are available only with the T-bar adjustment; therefore substitute T at the 7th digit and S at the 9th position. auge With Without Outlet pressure adjustment range* to (.3 to bar) F 5 to 1 (. to bar) L 1 to 5 (.7 to 17 bar) S** * Can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. ** Units with 5 outlet pressure range are available only with the T-bar adjustment; therefore substitute T at the 7th digit and S at the 9th position. ISO Symbol LE- Relieving

10 ccessories Olympian Plus Regulators Bracket kit Bracket kit auge 3/ Shut-off Single Double Panel Tamper Service... 1 * valve yoke yoke nut resistant kit Kits R/R, R Dimensions in inches (mm) R 1/ TE-B-P1 Y--1 Y Relieving 31-3/ TE-3B-P1 Y-3-1 Y on relieving / TE-B-P1 Y--1 Y-- 3/ TE-B-P1 Y--1 Y R 3/ TE-B-B Y--1 Y Relieving TE-B-B Y--1 Y-- on relieving / TE-B-B Y--1 Y-- 1-1/ TE-BB-B Y-B-1 Y-B- * For additional pressures and options see our website. R/R.13 (15)** 1. (37).7 (1) Reduces by mm with knob in locked position. dd 37 mm for unit with T handle. **.1" (157 mm) for models with 3/" ports R 7. (19)** 5. (133).91 (7).93 (17) Typical Performance Characteristics R/R OUTLET PRESSURE bar g FLOW CHRCTERISTICS PORT SIZE: 1/" ILET PRESSURE: 91 (.3 bar g) RE: 3 to 73 (1. to 5 bar) scfm 1 1 dm 3 /s IR FLOW OUTLET PRESSURE bar g 1 FLOW CHRCTERISTICS PORT SIZE: 1/" ILET PRESSURE: 15 (1 bar g) RE: 5 to 15 (.3 to 1 bar) 3 scfm dm 3 /s IR FLOW IR LIE EQUIPMET.13 (5). () R bar g 1 FLOW CHRCTERISTICS PORT SIZE: 1/" UPORTED ILET PRESSURE: 91 (.3 bar g) RE: 3 to 73 (1. to 5 bar) 1 3 scfm bar g 1 FLOW CHRCTERISTICS UPORTED ILET PRESSURE - 15 (1 bar g) RE: 5 to 1 (. to bar) scfm 1 1 dm 3 /s dm 3 /s.7 (1)* 7.7 (197)* IR FLOW IR FLOW Panel mounting hole diameter:." (5 mm) Maximum panel thickness:.5" ( mm) * dd 1." (37mm) for unit with T-bar. ** dd.39" (1mm) 1-1/" and 1-1/" models. Minimum clearance required to remove unit. LE-9

11 Olympian Plus Lubricators LM/C, LM/C IR LIE EQUIPMET Olympian Plus plug in design High flow general purpose regulator Push to lock adjusting knob with tamper resistant option Mount in any orientation LM/C Maximum pressure: 5 (17 bar) uarded transparent bowl: 15 (1 bar) -3 to 175 F (-3 to C) uarded transparent bowl: to 15 F (- to 5 C) LM/C Maximum pressure: 5 ( bar) to +175 F (- to + C) * ir supply must be dry enough to avoid ice formation at temperatures below +35 F (+ C). Materials: LM/C Body: Zinc Bowl: luminum Yoke: Zinc Elastomers: itrile LM/C Body: luminum Bowl: luminum Yoke: luminum djusting knob: cetal resin Elastomers: itrile ISO Symbol Models listed include yoke with threads, manual drain, and metal bowl with liquid level indicator. Type Port Size Model Flow scfm (dm3/s) Weight lb ( kg) Service Kit Micro-Fog 1/" LM-P-QD 153 (7) 3. (1.37) 3-1" LM-P-QU ().9 (.) 3-31* 1-1/" LM-P-QU ().59 (.) 1-1/" LM-BP-QU ().7 (.1) * For micro-fog only. For oil-fog order 3-3 Options selector (L) Type Oil-fog Micro-fog C M 1/" 3/" 3 1/" 3/" o yoke ISO parallel o yoke Options selector (L) Type Oil-fog Micro-fog ISO parallel one C M 3/" 1" 1Ê" 1Ë" B one LM/C L - P - Q L - P - Q U LM/C Options one Quick fill device Q Bowl 7 oz metal with liquid level indicator D 7 oz transparent with guard P 1 qt long metal bowl with liquid level indicator Options one Quick fill device Q LE-5

12 ccessories Olympian Plus Lubricators LM/C, LM/C Dimensions in inches (mm) Bracket kit Bracket kit 3/ Shut-off valve Single yoke Double yoke Tamper Quick fill resistant wire adapter L 1/" * TE-B-P1 Y--1 Y /" * TE-3B-P1 Y-3-1 Y /" * TE-B-P1 Y--1 Y /" * TE-B-P1 Y--1 Y L 3/" * TE-B-B Y--1 Y " * TE-B-B Y--1 Y /" * TE-B-B Y--1 Y /" * TE-BB-B Y-B-1 Y-B *To fit 1 liter bowl version. Optional 1 quart US (1 liter) bowl L (37) 15.7 (39) OPTIOL 1-QURT (1-LITER) BOWL.13 (15)**.33 (11).7 (7). (3).91 (7) 1.1 (3).9 (15) 1. (37) 1.1 (5).13 (15)**.91 (7). (3) 9.53 () **.1" (157) for models with 3/" ports. Minimum clearance required to remove unit. Mounting bracket (L).3 (11) 3.3 (5) 3.7 (93) 1.9 () 1.(31).3 (.). ().11 (.).57 (1.5) 5. (13).5 (11) Typical Performance Characteristics L FLOW CHRCTERISTICS bar d L.... bar d PORT SIZE 1/" ILET PRESSURE: (bar g) (.5) (.) (.3) (.) (1.) 1 1 scfm 1 dm 3 /s PORT SIZE: 1" MICRO-FO IR FLOW FLOW CHRCTERISTICS ILET PRESSURE: (bar) (.5) (.) (.3) (.) 15 (1.) 1 3 scfm IR LIE EQUIPMET.13 (5) 1 Quart US (1 Liter) Bowl 17.5 (5) ( ) 7. (19)**.91 (7) 9.9 (51) 17. (5). (1). Closed Bowl (o Drain) Manual Drain 1/ Turn Manual Drain ** dd.39" (1 mm) for 1-1/" and 1-1/"models. Minimum clearance required to remove bowl. 1. (5) 1. (3) 1. (9) Mounting bracket (L) 3.9 (1).3 (7) 1.97 (5) 7. (19)*.19 ()* 7. (19)*.59 (15).33 (9) L L bar d.... bar d dm 3 /s IR FLOW PORT SIZE: 1" OIL-FO FIXED VETURI PORT SIZE 1 1/" FLOW CHRCTERISTICS ILET PRESSURE: (bar) (.5) (.) (.3) (.) (1.) 1 3 scfm 1 1 dm 3 /s IR FLOW FLOW CHRCTERISTICS ILET PRESSURE: (bar) (.5) (.) (.3) (.) (1.). 1 scfm dm 3 /s IR FLOW LE-51

13 Olympian Plus Pressure Relief Valves VH, VH IR LIE EQUIPMET Olympian plug in system Helps protect compressed air systems from over pressure by retarding excessive pressure build up Integral pilot design provides superior sensitivity, accuracy, and quick response to over pressure conditions High relief flow Threaded relief port for silencer or piped exhaust VH Maximum pressure : 5 (17 bar) -3 to 175 F (-3 to C) VH Maximum pressure : 3 ( bar) to +175 F (- to + C) * ir supply must be dry enough to avoid ice formation at temperatures below +35 F (+ C). Materials VH Body: Zinc Bonnet: luminum djusting screw: steel Yoke: Zinc Elastomers: itrile VH Body: luminum Yoke: luminum Bonnet: luminum djusting screw: steel Valve: luminum Optional T-bar adjusting screw: Steel Elastomers: itrile ISO Symbol Models listed include threads, no gauge. Port Size Model Weight lb (kg) Service kit 1/" VH-D-RM 3. (1.3) 3-1" VH-D-RM.9 (.) 3-3 (all models) 1-1/" VH-D-RM.93 (.) 1-1/" VH-BD-RM 5. (.) Options selector (VH) 1/" 3/" 3 1/" 3/" ISO parallel o yoke ** Options selector (VH) 3/" 1" 1-1/" 1-1/" B one ISO parallel o Yoke VH **VH auge ports: 1/" with main ports 1/" ISO Rc with ISO Rc main ports 1/" ISO Rc with ISO main ports VH Exhaust port: 1/" with main ports 1/" ISO Rc with ISO Rc main ports 1/" ISO Rc with ISO main ports **VH auge ports: 1/ with yoke ports Rc1/ with ISO Rc yoke ports Rc1/ with ISO yoke ports VH Exhaust port: 1" with yoke ports Rc1 with ISO Rc yoke ports Rc1 with ISO yoke ports ** VH- D - R VH- D - R VH auge With Without Outlet pressure adjustment range* 5 to (.3 to bar) F 15 to 15 (1 to 1 bar) M 1 to 5 (.7 to 17 bar) S *Relief valve can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. auge With Without Outlet pressure adjustment range* to (.3 to bar) F 15 to 15 (1 to 1 bar) M 1 to 5 (.7 to 17 bar) S *Relief valve can be adjusted to pressures in excess of, and less than, those specified. Do not use these units to control pressures outside of the specified ranges. LE-5

14 Olympian Plus Pressure Relief Valves VH, VH Dimensions in inches (mm) ccessories Size Bracket kit Bracket kit auge... 1 Silencer Tamper resistant cap 3/ Shut-off valve VH 1/" MB TE-B-P1 3/" MB TE-3B-P1 1/" MB TE-B-P1 3/" MB TE-B-P1 VH 3/" MB TE-B-B 1" MB TE-B-B 1-1/" MB TE-B-B 1-1/" MB TE-BB-B For additional options see website. VH.13 (15)** VH.7 (1) 1. (37) 7. (19)**.91 (7) 1.3 (35).7 (5) Mounting bracket (VH).3 (11) 3.7 (93).3 (.) 1.(31) 3.3 (5) 1.9 (). () 5. (13).5 (11).11 (.).57 (1.5) Mounting bracket (VH) Typical Performance Characteristics ILET PRESSURE VH bar g VH RELIEF CHRCTERISTICS PORT SIZE: 1/" RE: 15 to 15 (1 to 1 bar) 1 3 scfm 1 1 dm 3 /s IR FLOW FLOW CHRCTERISTICS IR LIE EQUIPMET.13 (5) 1.97 (5) bar g 1 1 UPORTED RE: 15 to 15 (1 to 1 bar) 1.97 (5) 7. (19)*.19 ()* ILET PRESSURE scfm dm 3 /s IR FLOW.3 (7).59 (15) 3.9 (1) 1.1 (5).33 (9) 9.13 (3) 7. (19)* ** dd.39" (1mm) 1-1/" and 1-1/" models. Minimum clearance required to remove unit. LE-53

15 IR LIE EQUIPMET Olympian Plus Smooth Start/Exhaust Valves PF, PF Olympian Plus plug in design controls increase of downstream pressure on start up. Cylinders and other air operated devices are eased into normal operating positions, reducing the possibility of equipment damage and hazards to the user. 3 port/ position, normally closed, soft start valve with optional manual lockout slide Blocks inlet air and exhausts downstream air when pilot signal is removed or when the optional manual lockout slide is closed Optional manual slide can be padlocked in closed position Solenoid pilot or air pilot operation Designed primarily for use in start-up and shutdown of equipment, not as a frequently cycling directional control valve. orgren offers a wide variety of valves designed for frequent cycling and other applications. Please refer to the P7C and P7C valves, and to other orgren valve catalogs. Fluid: Compressed air Maximum pressure solenoid operated: Dependent on solenoid rating [must not exceed 5 (17 bar)] Max. pressure pilot operated: 5 (17 bar) max. Minimum operating pressure: (3 bar) Operating temperature solenoid operated: Dependent on solenoid rating [must be within range * to 15 F (- * to 5 C)]() [must be within range * to 175 F (- * to C)] () Operating temp. pilot operated: * to 175 F (- * to C) Operating temp. pilot operated: * to +175 F (- * to C) * ir supply must be dry enough to avoid ice formation at temperatures below 35 F ( C). Materials PF Body: Zinc alloy Intermediate body and top plate: luminum Exhaust bonnet: Zinc alloy Yoke: Zinc alloy Elastomers: Synthetic materials Filter discs: Sintered plastic Internal components: Brass/steel PF Body: luminum Top plate: luminum Bottom plate: luminum Yoke: luminum Elastomers: Synthetic materials Filter discs: Sintered plastic Internal components: Brass/steel LE-5 Models listed include threads. Port Size Solenoid Operated* Model Weight lb (kg) ir Pilot Operated Model Weight lb (kg) 1 " PF-C-PF. (.) PF--. (1.91) 3 " PF-C-PF 5. (.3) PF-- 5. (.7) 1" PF-D-PF.51 (.93) PF-B-.11 (.75) 1-1 " PF-D-PF. (.9) PF-B-. (.7) 1-1 " PF-BD-PF.9 (.9) PF-BB-.9 (.7) Options selector Series 1/"* 3/"* 3 1/"* 3/" 1"** 1-1/"** 1-1/"** B ISO parallel o Yoke ( in 5th position) ISO pilot and exhaust ports o Yoke ( in 5th position) pilot and exhaust ports Operator ir pilot ir pilot with manual lockout B mm miniature solenoid C mm miniature solenoid with manual lockout D * series only ** series only PF P F- - Sloenoid operated PF Connectors 3 pin plug with cable grip, no indicator Without PF ( mm solenoid) ominal Coil voltage power rating V d.c. W F 11/1 V, 5/ Hz /.5 V o solenoid PF (3 mm solenoid) ominal Coil voltage power rating V d.c..5 W P 11/1 V, 5/ Hz 1/1 V J o solenoid o coil Z Solenoid manual operator Shrouded push button P one ISO Symbol ir pilot

16 ccessories Olympian Plus Smooth Start/Exhaust Valves Size Bracket Bracket 3/ Shut-off Manual shut-off Single Double Exhaust port Connector plug with cable gland kit kit valve with lockout yoke yoke silencer PF, PF PF 1/" 75-5 TE-B-P1 Y--1 Y-- MB 593-* 1-5 V a.c./d.c. Indicator type 3/" 75-5 TE-3B-P1 Factory fit option only. Y-3-1 Y-3- MB /1 V a.c. Indicator type 1/" 75-5 TE-B-P1 See Options selector Y--1 Y-- MB o indicator 3/" 75-5 TE-B-P1 Y--1 Y-- MB PF 3/" TE-B-B Standard Y--1 Y-- MB 593-* 1-5 V a.c./d.c. Indicator type 1" TE-B-B Standard Y--1 Y-- MB /1 V a.c. Indicator type 1Ê" TE-B-B Standard Y--1 Y-- MB o indicator 1Ë" TE-BB-B Standard Y-B-1 Y-B- MB Typical Performance Characteristics * Reduced light intensity at 1 V. 7. (195) 1. (37) PF Solenoid operated.13 (15)** 1.1 (3) /F.1 (15).91 (7).31 (11) ir pilot operated 5.3 (13) 1. (37).13 (15)** 1.1 (3) /F 3. ().91 (7). (159) Solenoid operated plus manual shut-off with lockout.3 () 1. (37).13 (15)** 1.1 (3) /F.5 (15).5 (113). () ir pilot operated plus manual shut-off with lockout.3 (11) 1. (37).13 (15)** 1.1 (3) /F.17 (1).97 (177).5 (113) OUTLET PRESSURE bar d.... bar g PORT SIZE: 1/" T FLOW CHRCTERISTICS ILET PRESSURE: (bar g) (3) (.) (.3) () 15 (1) scfm dm 3 /s IR FLOW T Indicator type PERCETE SP POIT SP POIT o indicator.53 gal ( liter downstream volume) 1 1 CHRE TIME - (S) IR LIE EQUIPMET FLOW CHRCTERISTICS PF Solenoid operated 3.9 (1) 1. (9) 1.97 (5) 7. (19)**. (3) 9.5 (5).5 (113) Solenoid operated plus manual shut-off with lockout 3.9 (1) 1. (9) 1.97 (5) 7. (19)**. (3) 3.5 (9) 9.5 (5) 5.79 (17).39 (1) 7. (19) 3.9 (1) ir pilot operated ** 7.7" ( mm) for 1-1/, 1-1/ models. Minimum clearance required to remove unit (5) 7. (19)**. (3).5 (15).5 (113) ir pilot operated plus manual shut-off with lockout 3.9 (1) 7.51 (191) 1.97 (5) 7. (19)**. (3) 3.5 (9).57 (17) 5.79 (17).39 (1) OUTLET PRESSURE bar g bar d ILET PRESSURE: (bar g) PORT SIZE: 1" T (3) (.) (.3) () (1) (1.5) 3 (1) scfm dm 3 /s IR FLOW T 1 SP POIT 1 PERCETE SP POIT gallons (5 Liter) downstream volume 1 1 CHRE TIME - (S) LE-55

17 Series lockout valves 1/" to 3/" port size IR LIE EQUIPMET Olympian Plus plug in design ttaches to yoke, upstream or downstream of air processing units. TE 3-port/-position lockout valves help conform to OSH Lockout Regulations in US market. Fluid: Compressed air Maximum pressure: 5 (17 bar) to 175 F (- to C) * ir supply must be dry enough to avoid ice formation at temperatures below 35 F ( C). Cv factor from I to OUT ports 1/ port size:. 3/ port size: 5.5 1/ port size:.7 3/ port size: 7.5 Exhaust port threads on TT models: 1/ with main ports 1/ ISO Rc with ISO and ISO Rc main ports Materials Body: Zinc Slide: cetal plastic Elastomers: itrile Models listed include threads in the pilot and exhaust ports. -Port/-Position 3-Port/-Position (OSH) 3-Port/-Position Port Size o exhaust port Unthreaded exhaust port Threaded exhaust port Weight lbs (kg) 1/" TB-B-P1 TE-B-P1 TT-B-P1.9 (.) 3/" TB-3B-P1 TE-3B-P1 TT-3B-P1. (.) 1/" TB-B-P1 TE-B-P1 TT-B-P1. (.3) 3/" TB-B-P1 TE-B-P1 TT-B-P1. (.3) Service Kits Type Part umber TB (red slide) 3-1 TE (yellow slide) 3-11 TT (red slide) 3-1 Service kit includes seals and slide. 1.9 ()** 1.1 ().3 (59) ISO Symbols ** Models with 3/" ports ll Dimensions in Inches (mm) -Port/-Position 3-Port/-Position LE-5

18 T Olympian Plus T Shut-off & Lockout Valves 3/", 1", 1-1/", 1-1/" Port Sizes Olympian plug in system -port/-position and 3-port/- position shut-off valves Can be locked in open or closed position TE 3-port/-position lockout valves help conform to OSH Lockout Regulations in US market. Exhaust outlet is not tapped. Fluid: Compressed air Maximum pressure: 5 (17 bar) to +175 F (- to + C) * ir supply must be dry enough to avoid ice formation at temperatures below +35 F (+ C). Cv factor: I to OUT port: 7.5 OUT to EXHUST port:.1 Exhaust port threads on TH models: 1/ Materials: Body: luminum Handle: Zinc Seals: itrile Ball: Brass Models listed are with threads. 3-Port/-Position (OSH) -Port/-Position Port Size Unthreaded exhaust port Weight lbs (kg) o exhaust port Weight lbs (kg) 3/" TE-B-B.1 (1.) T-B-B.1 (1.) 1" TE-B-B.1 (.9) T-B-B 1.9 (.7) 1-1/" TE-B-B.7 (.9) T-B-B.1 (1.) 1-1/" TE-BB-B.1 (.9) T-BB-B.1 (.9) Service Kits Item Part umber Service kit 3-3 Service kit includes, valve spring, slip ring, valve assembly, diaphragm assembly and necessary seals and o rings. Yoke Mounted Models 3.15 () * 3.9 (1) Inline Mounted Models 3.7 (95) ** 3.9 (1) IR LIE EQUIPMET 3.7 (95) 3.7 (95). (). () ISO Symbols 1.9 (3) 1.9 (3).79 ( ).79 ( ) -Port/-Position 3-Port/-Position * 3.35" (5 mm) for 1-1/" ported models. **.13" (15 mm) for 1-1/" ported models. Dimensions in inches (mm) LE-57