Compressed Air Cleaning Filter Series
|
|
- Dwain Dawson
- 6 years ago
- Views:
Transcription
1 Compressed Air Cleaning Filter Series Series / For Water, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! Uses the same spacer as the F.R.L. combination AC series. Possible to make a modular connection with products such as AR series regulator. Options added Addition: 5 types 1. MPa specifications FKM specifications With differential pressure switch (125 VAC, 30 VDC) With differential pressure switch (30 VDC) Degreasing wash, white vaseline specifications Spacer Note) Note) Spacer with bracket cannot be mounted. Use the attached bracket. G C, C, C, D C H C, E C, F C Differential pressure switch Height and weight reduced by up to 40% New G C, C, C, D C H C, E C, F C Modular connection example H + E H + E + F The C type is only suitable for modular connection. Compact, Lightweight (E C, F C) Conventional Water Separation Water Separator/G Solid/Oil Separation Main Line Filter/ Mist Separator/ Micro Mist Separator/D Micro Mist Separator with Pre-filter/H Super Mist Separator/E Deodorization Odor Removal Filter/F HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 181
2 Series / Water droplet removal Water Separator Water droplet separation rate: % Large dust particle filtration, Oil droplet separation Main Line Filter Nominal filtration rating: 3 µm [Filtration efficiency: %] 2C to 22C Dust filtration, Oil mist separation Mist Separator G150C to 550C 37B/75B Nominal filtration rating: 0.3 µm [Filtration efficiency:.%] Oil mist density at outlet: Max. 1.0 mg/m 3 (ANR) [ 0.8 ppm] 150C to 550C Dust filtration, Oil mist separation Micro Mist Separator Nominal filtration rating: 0.01 µm [Filtration efficiency:.%] Oil mist density at outlet: Max. 0.1 mg/m 3 (ANR) [ 0.08 ppm] G50/850 75A to 2A 50/ C 250C 350C G 450C 550C C 4C 8C 11C 22C 37B 75B 75A 125A 150A 2A 150C 250C 350C 450C 550C C 250C 350C 450C 550C D Flow capacity L/min (ANR) capacity at 0.7 MPa inlet pressure ,500 2,0 3,700,000 12, ,500 2,0 3,700,000 12,000 22,000 28,000 42, ,500 2,0 3,700,000 12, ,000 2,000 3,700,000 12,000 8,000 24,000 40,000 Port size 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 1, 1 1/2 1 1/2, 2 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 1, 1 1/2 1 1/2, 2 50(2B) flange 80(3B) flange 0(4B) flange 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 1, 1 1/2 1 1/2, 2 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 1, 1 1/2 1 1/2, 2 50(2B) flange 50(2B), 80(3B), 0(4B) flange 0(4B), 150(B) flange Note Piping support type Piping support type Free standing type Piping support type Piping support type Free standing type D150C to 550C D50,
3 Compressed Air Cleaning Filter Series Series / Dust filtration, Oil mist separation Micro Mist Separator with Pre-filter Built-in 0.3 µm pre-filter The + D element have been integrated to achieve a space-saving design. Nominal filtration rating: 0.01 µm [Filtration efficiency:.%] Oil mist density at outlet: Max. 0.1 mg/m 3 (ANR) [ 0.08 ppm] Super Mist Separator Odor Removal Filter H150C to 550C H50/850 Dust filtration, Oil mist adsorption Color change indicates when element is saturated. Nominal filtration rating: 0.01 µm [Filtration efficiency:.%] Oil mist density at outlet: Max mg/m 3 (ANR) [ ppm] Cleanliness at outlet: Not more than 35 particles of size 0.3 µm or larger/ L (0 particles or less/ft 3 ) E150C to 550C E50/850 Deodorization Nominal filtration rating: 0.01 µm [Filtration efficiency:.%] Oil mist density at outlet: Max mg/m 3 (ANR) [ ppm] 150C 250C 350C H 450C 550C C 250C 350C E 450C 550C C 250C 350C 450C 550C F Flow capacity L/min (ANR) capacity at 0.7 MPa inlet pressure ,000 2,000 3,700,000 12, ,000 2,000 3,700,000 12, ,000 2,000 3,700,000 12,000 Port size 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 1, 1 1/2 1 1/2, 2 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 1, 1 1/2 1 1/2, 2 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 1, 1 1/2 1 1/2, 2 Note Piping support type Piping support type Piping support type HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD F150C to 550C F50, ,000 24,000 40,000 50(2B) flange 50(2B), 80(3B) 0(4B) flange 0(4B), 150(B) flange Free standing type 183
4 Compressed Air Cleaning Filter Series Series / Series Water removal rate Nominal filtration rating Oil mist density at outlet Smell Page Water Separator Water Separator Eliminates water droplets in the compressed air. Series G % P.185 Main Line Filter Eliminates impurities such as oil and foreign matter, etc. in compressed air. Series 3 µm (Filtration efficiency: %) P.13 Deodorizer Solid/Oil Separator Mist Separator Eliminates oil mist in compressed air or rust sized 0.3 µm or more, and foreign matter such as carbon. Micro Mist Separator Eliminates foreign matter sized 0.01 µm or more, or oil particles in an aerosol state. Micro Mist Separator with Pre-filter Oil separator, which incorporates pre-filter (equivalent to the series) into micro mist separator. Super Mist Separator Captures foreign matter sized 0.01 µm or more and adsorbs oil particles in an aerosol state. Odor Removal Filter Eliminates odor from compressed air. Series Series D Series H Series E Series F 0.3 µm (Filtration efficiency:.%) 0.01 µm (Filtration efficiency:.%) µm (Filtration efficiency:.%) 0.01 µm (Filtration efficiency:.%) 1 mg/m 3 (ANR) ( 0.8 ppm) (after oil saturation) 0.1 mg/m 3 (ANR) ( 0.08 ppm) (after oil saturation) 0.01 mg/m 3 (ANR) ( ppm) mg/m 3 (ANR) ( ppm) Reduces oil smell. Deodorizes oil smell. P.1 P. P.21 P.227 P.235 Modular Connection Examples P.244 How to Order Bowl Assembly P.24 Options Seal material: FKM - reversal direction Degreasing wash, For medium air pressure Drain guide 1/4 female threaded white vaseline With element service indicator With differential pressure switch (with indicator) (125 VAC, 30 VDC) With differential pressure switch (with indicator) (30 VDC) Refer to How to Order of respective models. Made to Order With differential pressure gauge Possible to control product, s service life by monitoring the clogged element. Auto drain type, drain guide specifications Drain piping is possible by auto drain type. With - flange Flange piping connection is possible. Applicable only to the 37B, 75B, 50 and 850. Clean Series Special Specifications Usable inside a clean room. White vaseline specifications Using white vaseline for lubricant. With differential pressure gauge, - flange Flange piping connection and clogged element confirmation are possible. With differential pressure switch (with indicator) Allows visual confirmation of differential pressure which indicates the element life. The built-in contact enables remote control. Cotter-free, Fluorine-free Series Eliminates the effects on a color CRT by copper ion or fluoric resin, etc. P.250 P.250 Related Products Auto Drain Valve, Motor Operated Auto Drain, Heavy Duty Auto Drain, Differential Pressure Gauge P.354 Specific Product Precautions P
5 Water Separator Series G RoHS Can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element that is exclusively used for removing water droplets and the ample housing interior space, a % water removal rate has been achieved. Caution Water separator can remove water droplets, but it cannot remove moisture. Condition of inlet air Pressure: 0.7 MPa Temperature: 25 C Relative humidity: 0% Liquid water content (Water droplet content): 15 g/m 3 (ANR) Compressed air flow: Rated flow of each model Water removal rate (%) = Removed water (Water droplet) (g) x 0 Inflowed water (Water droplet) (g) Modular connection is possible with G150C to 550C. (For details, refer to page 244.) G150C G250C G350C G450C G550C G50 G850 Note) Rated flow (L/min (ANR)) Port size 1 8, , , , , 1 1, , 2 Weight (kg) Note) capacity at 0.7 MPa. capacity varies depending on the operating pressure. Refer to Flow Characteristics (page 188) and Maximum Flow Capacity Line (page 18). Specifications Fluid Compressed air Max. operating pressure 1.0 MPa Min. operating pressure 0.05 MPa Proof pressure 1.5 MPa Ambient and fluid temperature 5 to 0 C Water removal rate % Element life 2 years or when pressure drop reached 0.1 MPa With auto drain: 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) Accessory Applicable model G150C G250C G350C G450C G550C G50 G850 Bracket assembly (with 2 mounting screws) -BM1 -BM2 -BM3 -BM4 -BM5 BM5 BM57 Caution Be sure to read before handling. Refer to front matter 43 for Safety Instructions and pages to 8 for Air Preparation Equipment Precautions. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD G150C to 550C G G50/850 G (Drain cock specifications) (Auto drain specifications) Made to Order (For details, refer to page 250.) 185
6 Series G How to Order G150C to 550C G 550C Body size 150C 250C 350C 450C 550C Thread type Type Nil Rc F G 1 N NPT 1 Conforms to ISO Port size Applicable body size Size 150C 250C 350C 450C 550C 1/8 1/4 3/8 1/2 3/4 1 Accessory Nil B Bracket Bracket is included, (but not assembled). 3 The model with bracket is not available for -X15. Nil X15 X2 Auto drain 4 Nil Drain cock (Without auto drain) C N.C. auto drain D N.O. auto drain 4 Refer to Drain Exhaust Specifications/ Option Combinations. (Only one drain exhaust method can be selected.) Auto Drain Exhaust Specifications/Option Combinations : All types of drain exhaust specifications are available. (including drain guide, J specification) : N.C. auto drain ( C specification) is not available. : Both N.C. and N.O. auto drain ( C, D specification) are not available. F H R V Nil F H R V : Not available Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) With - flange 3 N.C., N.O. auto drain, drain piping type Option 4 Nil F Rubber material: FKM H For medium air pressure (1. MPa) J Drain guide 1/4 female threaded 5 R - reversal direction V Degreasing wash, white vaseline 5 Drain piping and piping for a stop valve such as ball valve are required. Only body/housing is degreasing washed. Page for details P.252 P.253 Options F: Rubber material: FKM FKM is used for the parts such as O-ring and gasket. H: For medium air pressure (1. MPa) Can be used up to 1. MPa at maximum. J: Drain guide 1/4 female threaded Can be pipied to the drain exhaust port. 1/4 female threaded R: - reversal direction Air flow in the separator is changed to right to left. (Air flow direction of the standard: Left to right.) V: Degreasing wash, white vaseline Body/housing is degreasing washed. The lubrication grease for O-ring and gasket is changed to white vaseline. 18
7 Water Separator Series G G50/850 G 50 How to Order Body size Thread type Type Nil Rc F G N NPT Port size Applicable body size Size Accessory Nil B Bracket Bracket is included, (but not assembled). 2 The model with bracket is not available for -X15. Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) Nil X15 X2 X12 Auto drain 3 Nil Drain cock (Without auto drain) 4 D N.O. auto drain 3 Refer to Auto Drain Specifications/Option Combinations. 4 Body size 850 is equipped with a ball valve (Rc 3/8 female threaded). Mount a piping adapter IDF-AP0 (page 245) to the ball valve if NPT 3/8 female threaded is required. With - flange 2 N.C., N.O. auto drain, drain piping type White vaseline Option 3 Nil J Drain guide 1 4 female threaded 5 R - reversal direction 5 Drain piping and piping for a stop valve such as ball valve are required. Note) Element service indicator (symbol: T) is not available as an option because water deposits inside the indicator could lead to malfunctions. Page for details P.252 P.253 P.253 Note) Refer to How to Order Bowl Assembly on page 24. Auto Drain Specifications/Option Combinations : Available : Not available Auto drain specifications/option Auto drain specifications Option Applicable model D J R G50 G850 Auto drain specifications N.O. auto drain Drain guide 1 4 D J Option - reversal direction R HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 187
8 Series G Flow Characteristics (Representative values) / Select the model under the max. flow capacity line. Note) Compressed air over max. flow capacity line in the table below may not meet the specifications of the product. G150C G450C G850 capacity line capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) G250C G550C capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) G350C capacity line G50 capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) 188
9 Water Separator Series G Construction G150C to 550C, G50 q G850 Component Parts No. Material Note 1 Body Aluminum alloy Chrome treated Epoxy coating on 2 3 Housing Sight glass Aluminum alloy Tempered glass inner surface Replacement Parts No. Material 4 Element assembly Resin, others Applicable model Except option F For option F G150C G-EL150 G-EL150-F Maximum Flow Capacity Line G250C G-EL250 G-EL250-F G350C G-EL350 G-EL350-F Note) Refer to How to Order Bowl Assembly on page 24. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction. Refer to dimensions on pages 10 to 12 for details. G450C G-EL450 G-EL450-F Element assembly: With gasket (1 pc.) and O-ring (1 pc.) Refer to back page 25 for replacement of auto drain. Element assemblies for Made to Order (X12, X15, X2) are same as those for standard (see the above table). capacity (m 3 /min (ANR)) r w e Selection G550C G-EL550 G-EL550-F G50 G-EL50 G850 G-EL850 Select a model in accordance with the following procedure taking the inlet pressure and the max. flow capacity into consideration. (Example) Inlet pressure: 0. MPa capacity: 5 m 3 /min (ANR) 1. Obtain the intersecting point A of inlet pressure and max. flow capacity in the graph. 2. The G50 is obtained when the max. flow capacity line is above the interecting point A in the graph. Note) Make sure to select a model that has the max. flow capacity line above the obtained intersecting point. With a model that has the max. flow capacity line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD Inlet pressure (MPa) 18
10 Series G Dimensions G150C to 550C P Q Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) F R O S Drain cock Gray: N.C. Black: N.O. 34 ø One-touch fitting K U T D I L M øv Bracket (Accessory) N Combination of D: With auto drain (N.O.) and H: For medium air pressure H C J A E B 2 Port size Note) 1/4 female threaded Note) 23 for G250C. Width across flats 17 Option J: Drain guide 1/4 female threaded G Maintenance space Drain port M5 Width across flats 24 1/4 female threaded G150C G250C G350C G450C G550C Port size 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 A B C D E F G 15 H I 5 J K T 7 Bracket related dimensions U L M V N O P 70 Q R (mm) S
11 Water Separator Series G Dimensions G50 Auto drain D: With auto drain (N.O.) Drain cock: Black 34 HAA HAW AT IDF IDU IDFA ø One-touch fitting IDFB IDH 10 Option J: Drain guide 1/4 female threaded ID IDG Bracket (Accessory) 85 IDK G x Port size 1, 11/2 female threaded Width across flats 24 1/4 female threaded D H E F ZFC 23 SF Maintenance space Drain port M5 SFD LLB AD GD 11
12 Series G Dimensions G850 Auto drain 2 1 D: With auto drain (N.O.) for G () /8 female threaded Bracket Accessory Drawing of view B view B 2 x Port size 1, 1 1 /2 female threaded Maintenance space Drain Rc 3/8 female threaded 12
13 Main Line Filter Series RoHS Can remove impurities such as oil, water and foreign matter in compressed air and can improve the function of a dryer in the downstream, extend the life of precision filter, and prevent trouble with the equipment. Modular connection is possible with 2C to 22C. (For details, refer to page 244.) 2C to 22C 37B, 75B (Drain cock specifications) (Auto drain specifications) Made to Order (For details, refer to page 250.) Caution Be sure to read before handling. Refer to front matter 43 for Safety Instructions and pages to 8 for Air Preparation Equipment Precautions. 2C 4C 8C 11C 22C 37B 75B 75A 125A 150A 2A Rated flow Note) (L/min (ANR)) Port size 1 8, , , , 3 50(2B) 80(3B) 0(4B) 0(4B) 4 3 4, 1 1, , 2 JIS K FF flange Weight (kg) Note) capacity at 0.7 MPa. capacity varies depending on the operating pressure. Refer to Flow Characteristics (page 1) and Maximum Flow Capacity Line below. Specifications Fluid Max. operating pressure Min. operating pressure Note 2) Proof pressure Ambient and fluid temperature Filtration rating Element life Note 1) 75A to 2A: 0.7 MPa Note 2) With auto drain: 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) Accessory/For 2C to 22C, 37B/75B Applicable model 2C 4C 8C 11C 22C 37B 75B Bracket assembly (with 2 mounting screws) -BM1 -BM2 -BM3 -BM4 -BM5 BM5 BM57 Accessory/For 75A to 2A Applicable model 75A 125A 150A 2A Auto drain with metal case (2 pcs. each) Auto drain with resin case (2 pcs. each) Pressure gauge (2 pcs. each) AD AD G Companion flange (2 pcs. each) 50(2B)JIS K FF flange 80(3B)JIS K FF flange 0(4B)JIS K FF flange Anchor bolt (3 pcs. each) AI-2S Selection Select a model in accordance with the following procedure taking the inlet pressure and the max. flow capacity into consideration. (Example) Inlet pressure: 0. MPa capacity: 5 m 3 /min (ANR) 1. Obtain the intersecting point A of inlet pressure and max. flow capacity in the graph. 2. The 37B is obtained when the max. flow capacity line is above the intersecting point A in the graph. Note) Make sure to select a model that has the max. flow capacity line above the obtained intersecting point. With a model that has the max. flow capacity line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. Compressed air 1.0 MPa Note 1) 0.05 MPa 1.5 MPa 5 to 0 C 3 µm (Filtration efficiency: %) 2 years (1 year for A type) or when pressure drop reached 0.1 MPa Maximum Flow Capacity Line capacity (m 3 /min (ANR)) Inlet pressure (MPa) HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 13
14 Series 2C to 22C Options 22C Body size Thread type Applicable compressor output (guide) Type 2C 4C 8C 2.2 kw 3.7 kw 7.5 kw Nil F N Rc G 1 NPT 11C 22C 11 kw 22 kw 1 Conforms to ISO Port size Size Applicable body size Accessory 2C 4C 8C 11C 22C /8 1/4 Nil B Bracket /8 1/2 3/4 2 Bracket is included, (but not assembled). 3 The model with bracket is not available 1 for -X15 and -X17. Drain Exhaust Specifications/Option Combinations : All types of drain exhaust specifications are available. (including drain guide, J specification) : N.C. auto drain ( C specification) is not available. : Both N.C. and N.O. auto drain ( C, D specification) are not available. Nil F H R S U T V Note Nil F H R S U T V Note Note Note Note: Only one drain exhaust method can be selected. : Not available How to Order Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) Nil X X15 X17 X2 Option 4 Nil F H J R S U T V With differential pressure gauge (GD ) With - flange 3 With differential pressure gauge (GD ) and - flange 3 N.C., N.O. auto drain, drain piping type Rubber material: FKM For medium air pressure (1. MPa) Drain guide 1/4 female threaded 5 - reversal direction With differential pressure switch (125 VAC, 30 VDC) With differential pressure switch (30 VDC) With element service indicator Degreasing wash, 7 white vaseline Auto drain 4 Nil Drain cock (Without auto-drain) C N.C. auto drain D N.O. auto drain 4 Refer to Drain Exhaust Specifications/ Option Combinations. (Only one drain exhaust method can be selected.) Page for details P.251 P.252 P.252 P.253, Note) 5 Drain piping and piping for a stop valve such as ball valve are required. Differential pressure gauge is included, (but not assembled). 7 Only body/housing is degreasing washed. Note) Order U if conformity to the EU directive is required. F: Rubber material: FKM FKM is used for the parts such as O-ring and gasket. H: For medium air pressure (1. MPa) Can be used up to 1. MPa at maximum. J: Drain guide 1/4 female threaded 1/4 female thread Can be pipied to the drain exhaust port. R: - reversal direction Air flow in the separator is changed to right to left. (Air flow direction of the standard: Left to right.) T: With element service indicator Pressure drop 0.1 MPa Saturation of the separator can be observed visually. (Element life check) V: Degreasing wash, white vaseline Body/housing is degreasing washed. The lubrication grease for O-ring and gasket is changed to white vaseline. 14 S: With differential pressure switch (with indicator) Saturation of the separator can be observed visually or by an electrical signal. (Element life check) The rated contact voltage is different from U. Max. contact capacity: VA AC, W DC Rated contact voltage (max. operating current): 125 V AC (0.08 A), 30 V DC (0.33 A) Reed switch U: With differential pressure switch (with indicator) Saturation of the separator can be observed visually or by an electrical signal. (Element life check) The rated contact voltage is different from S. Max. contact capacity: W DC Rated contact voltage (max. operating current): 30 V DC (0.33 A) Reed switch
15 Main Line Filter Series 37B/75B 37B 75B 37B Body size Applicable compressor output (guide) 37 kw 75 kw 14 75A to 2A Thread type Type Nil Rc F G N NPT Size Port size Applicable body size 37B 75B 75A Standard size (Applicable compressor) Compressor output 75A 75 kw 125A 1 to 125 kw 150A 150 kw 2A 180 to 2 kw How to Order D Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) Nil X X37 X15 X17 X2 X12 With differential pressure gauge (GD ) With differential pressure switch (With indicator, 125 VAC, 30 VDC) With - flange 2 With differential pressure gauge (GD ) and - flange 2 N.C., N.O. auto drain, drain piping type White vaseline specifications Option 3 Nil J Drain guide 1 4 female threaded 5 R - reversal direction T With element service indicator 5 Drain piping and piping for a stop valve such as ball valve are required. Auto drain 3 Nil Drain cock (Without auto drain) 4 D N.O. auto drain 3 Refer to Auto Drain Specifications/Option Combinations. 4 Body size 75B is equipped with a ball valve (Rc 3/8 female threaded). Mount a piping adapter IDF-AP0 (page 245) to the ball valve if NPT 3/8 female threaded is required. Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) Page for details Nil X13 Mist separator for high flow rate (Nominal filtration rating: 0.3 µm) P.254 Accessory Nil D Auto drain (Metal case) P Auto drain (Resin case) G Pressure gauge F Companion flange L Anchor bolt Note) Combination of D and P is not available. Page for details P.251 P.251 P.252 P.252 P.253 P.253 Auto Drain Specifications/Option Combinations : Available : Not available Auto drain specifications/option Auto drain specifications Option Applicable model D J R T 37B 75B Auto drain specifications Option N.O. auto drain Drain guide reversal direction D J R With element service indicator T Size 50(2B) JIS K FF flange 80(3B) JIS K FF flange 0(4B) JIS K FF flange Accessory Nil B Bracket Bracket is included, (but not assembled). 2 The model with bracket is not available for -X15 and -X17. Port size Applicable body size 75A 125A 150A 2A Note) Refer to How to Order Bowl Assembly on page HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD
16 Series Flow Characteristics (Representative values)/select the model under the max. flow capacity line. (Element oil saturation) Note) Compressed air over max. flow capacity line in the table below may not meet the specifications of the product. 2C 22C 75A capacity line capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) 4C 37B 125A capacity line capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) 8C 75B 150A capacity line capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) Air flow rate (m 3 /min (ANR)) 11C 2A capacity line capacity line 1 Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR))
17 Main Line Filter Series Construction 2C to 22C, 37B 75B q Replacement Parts No. Material 4 r w Element assembly Cotton paper, others Element assembly: With gasket (1 pc.) and O-ring (1 pc.) Refer to page 25 for replacement of auto drain. Element assemblies for Made to Order (X, X12, X15, X17, X2, X37) are same as those for standard (see the above table). 75A to 2A ( side) Guage port Applicable model Except option F For option F 2C -EL2B -EL2B-F Component Parts No. Material Note Body Housing Sight glass Aluminum alloy Aluminum alloy Tempered glass e Chrome treated Epoxy coating on inner surface 4C -EL4B -EL4B-F 8C -EL8B -EL8B-F Note) Refer to How to Order Bowl Assembly on page 24. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction. Please refer to pages 18 through to 0 for details. 11C -EL11B -EL11B-F 22C -EL22B -EL22B-F 37B -EL37B 75B -EL75B HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD Drain Gauge port ( side) Component Parts No. 1 Case 2 Cover Material SGP-E, SS400 SS400 Note Drain Replacement Parts No. Material Qty. 3 Element 4 Seal NBR A 125A 150A 2A EC N EC N EC00-003N AL-33S AL-34S AL-35S 17
18 Series Dimensions 2C to 22C P Q Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) Drain cock Gray: N.C. Black: N.O. 34 F O ø One-touch fitting 2 x port size S, U: With differential pressure switch (with indicator) Y Z T: With element service indicator W X R S Combination of D: With auto drain (N.O.) and H: For medium air pressure K U T D I L M øv Bracket (Accessory) N Note) 1/4 female threaded Note) 23 for 4C. Width across flats 17 H C J A E B Option J: Drain guide 1/4 female threaded Width across flats 24 1/4 female threaded G Maintenance space Drain port M5 2C 4C 8C 11C 22C 18 Port size 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 A B C D E F G Bracket related dimensions 15 H I J K T 7 U 7 L M 7 V N O 54 P 70 Q 2 R 4.5 S 1. (mm) Element Differential service pressure indicator related switch related dimensions dimensions W 24 X 37 Y 32 Z
19 Main Line Filter Series Dimensions 37B Auto drain D: With auto drain (N.O.) Drain cock: Black HAA HAW AT ø One-touch fitting 34 IDF IDU IDFA IDFB Option IDH J: Drain guide 1/4 female threaded ID 10 IDG Bracket (Accessory) 85 IDK G Width across flats 24 1/4 female threaded x port size 1, 1 1 /2 female threaded T: With element service indicator D H E F ZFC 23 SF Maintenance space Drain port M5 SFD LLB AD GD 1
20 Series Dimensions 75B () 13 Drawing of view B Bracket Accessory View B x port size 11/2, 2 female threaded 44 Auto drain D: With auto drain (N.O.) for 75B 58 Drain Rc 3/8 female threaded Maintenance space 3/8 female threaded 23 75A to 2A 3 x ø holes For foundation bolt Option T: With element service indicator Label Drain ORIENTATION 0 Drain (mm) Port size øa B C D E F G 75A 125A 150A 50(2B)JISK FF flange 80(3B)JISK FF flange 0(4B)JISK FF flange 0 (8B) 0 (8B) 250 (B) A 0(4B)JISK FF flange 300 (12B)
21 Mist Separator Series RoHS Can remove oil mist in compressed air and separate and remove particles such as rust or carbon of more than 0.3 µm. Modular connection is possible with 150C to 550C. (For details, refer to page 244.) 150C to 550C (Drain cock specifications) 50/850 (Auto drain specifications) Made to Order (For details, refer to page 250.) Note) Rated flow (L/min (ANR)) Port size Weight (kg) 150C C C C C , , , , , 1 1, , Note) Maximum flow capacity at 0.7 MPa. Maximum flow capacity varies depending on the operating pressure. Refer to Flow Characteristics (page 4) and Max. Flow Capacity Line (page 5) below. Note) Refer to Made to Order (page 254) for high flow type of 850 or more. Specifications Fluid Max. operating pressure Min. operating pressure 1 Proof pressure Ambient and fluid temperature Nominal filtration rating Oil mist density at outlet Element life 1 With auto drain: 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) 2 Oil mist density at 30 mg/m 3 (ANR) blown out by compressor. Accessory Applicable model Bracket assembly (with 2 mounting screws) Caution Compressed air 1.0 MPa 0.05 MPa 1.5 MPa 5 to 0 C 0.3 µm (Filtration efficiency:.%) Max. 1 mg/m 3 (ANR) ( 0.8 ppm) 2 2 years or when pressure drop reached 0.1 MPa 150C 250C 350C 450C 550C BM1 -BM2 -BM3 -BM4 -BM5 BM5 BM57 Be sure to read before handling. Refer to front matter 43 for Safety Instructions and pages to 8 for Air Preparation Equipment Precautions. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 1
22 Series 150C to 550C Body size Applicable compressor output (guide) 150C 2.2 kw 250C 3.7 kw 350C 7.5 kw 450C 11 kw 550C 22 kw /8 1/4 3/8 1/2 3/4 1 Options 550C Thread type Type Nil Rc F G 1 N NPT 1 Conforms to ISO Port size Applicable body size Size 150C 250C 350C 450C 550C Nil B Bracket 2, 3 2 Bracket is included, (but not assembled). 3 The model with bracket is not available for -X15 and -X17. Nil F H R S U T V Nil Note F H R Note S U T V Note Note Note: Only one drain exhaust method can be selected. : Not available How to Order Accessory Drain Exhaust Specifications/Option Combinations : All types of drain exhaust specifications are available. (including drain guide, J specification) : N.C. auto drain ( C specification) is not available. : Both N.C. and N.O. auto drain ( C, D specification) are not available. Nil X X15 X17 X2 Option 4 Nil F H J R S U T V Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) With differential pressure gauge (GD ) With - flange With differential pressure gauge (GD ) and - flange 3 N.C., N.O. auto drain, drain piping type Rubber material: FKM For medium air pressure (1. MPa) Drain guide 1/4 female threaded 5 - reversal direction With differential pressure switch (125 VAC, 30 VDC) With differential pressure switch (30 VDC) Element service indicator Degreasing wash, 7 white vaseline 5 Drain piping and piping for a stop valve such as ball valve are required. Differential pressure gauge is included, (but not assembled). 7 Only body/housing is degreasing washed. Note) Order U if conformity to the EU directive is required. Auto drain 4 Nil Drain cock (Without auto drain) C N.C. auto drain D N.O. auto drain 4 Refer to Drain Exhaust Specifications/ Option Combinations. (Only one drain exhaust method can be selected.) Page for details P.251 P.252 P.252 P.253, Note) F: Rubber material: FKM FKM is used for the parts such as O-ring and gasket. H: For medium air pressure (1. MPa) Can be used up to 1. MPa at maximum. J: Drain guide 1/4 female threaded Can be pipied to the drain exhaust port. 1/4 female threaded R: - reversal direction Air flow in the separator is changed to right to left. (Air flow direction of the standard: Left to right.) T: With element service indicator Pressure drop 0.1 MPa Saturation of the separator can be observed visually. (Element life check) V: Degreasing wash, white vaseline Body/housing is degreasing washed. The lubrication grease for O-ring and gasket is changed to white vaseline. 2 S: With differential pressure switch (with indicator) Saturation of the separator can be observed visually or by an electrical signal. (Element life check) The rated contact voltage is different from U. Max. contact capacity: VA AC, W DC Rated contact voltage (max. operating current): 125 VAC (0.08 A), 30 VDC (0.33 A) Reed switch U: With differential pressure switch (with indicator) Saturation of the separator can be observed visually or by an electrical signal. (Element life check) The rated contact voltage is different from S. Max. contact capacity: W DC Rated contact voltage (max. operating current): 30 VDC (0.33 A) Reed switch
23 Mist Separator Series 50/ Body size Applicable compressor output (guide) kw kw Thread type Type Nil Rc F G N NPT Port size Size Applicable body size Accessory Nil B Bracket 1, 2 1 Bracket is included, (but not assembled). 2 The model with bracket is not available for -X15 and -X17. How to Order Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) Nil X X37 X15 X17 X2 X12 With differential pressure gauge (GD ) With differential pressure switch (With indicator, 125 VAC, 30 VDC) With - flange 2 With differential pressure gauge (GD ) and - flange 2 N.C., N.O. auto drain, drain piping type White vaseline specifications Option 3 Nil J Drain guide 1 4 female threaded 5 R - reversal direction T With element service indicator 5 Drain piping and piping for a stop valve such as ball valve are required. Auto drain 3 Nil Drain cock (Without auto drain) 4 D N.O. auto drain 3 Refer to Auto Drain Specifications/Option Combinations. 4 Body size 850 is equipped with a ball valve (Rc 3/8 female threaded). Mount a piping adapter IDF-AP0 (page 245) to the ball valve if NPT 3/8 female threaded is required. Auto Drain Specifications/Option Combinations Auto drain specifications/option Auto drain specifications Option D J R T Auto drain specifications N.O. auto drain D Drain guide 1 4 J Option - reversal direction R With element service indicator T Page for details P.251 P.251 P.252 P.252 P.253 P.253 Note) Refer to How to Order Bowl Assembly on page 24. : Available : Not available Applicable model HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 3
24 Series Flow Characteristics (Representative values) /Select the model under the max. flow capacity line. (Element oil saturation) Note) Compressed air over max. flow capacity line in the table below may not meet the specifications of the product. 150C 450C 850 capacity line capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) 250C 550C capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) 350C 50 capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) 4
25 Mist Separator Series Construction 150C to 550C, q r w Replacement Parts No. Material 4 Maximum Flow Capacity Line Maximum flow capacity (m 3 /min (ANR)) Element assembly Glass fiber, others Applicable model Except option F For option F 150C -EL150 -EL150-F e Component Parts No. Material Note Body Housing Sight glass Aluminum alloy Aluminum alloy Tempered glass Chrome treated Epoxy coating on inner surface 250C -EL250 -EL250-F 350C -EL350 -EL350-F Element assembly: With gasket (1 pc.) and O-ring (1 pc.) Refer to page 25 for replacement of auto drain. Element assemblies for Made to Order (X, X12, X15, X17, X2, X37) are same as those for standard (see the above table). Note) Refer to How to Order Bowl Assembly on page 24. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction. Refer to dimensions on pages through to 8 for details. 450C -EL450 -EL450-F Selection 550C -EL550 -EL550-F 50 -EL EL850 Select a model in accordance with the following procedure taking the inlet pressure and the maximum flow capacity into consideration. (Example) Inlet pressure: 0. MPa Maximum flow capacity: 5 m 3 /min (ANR) 1. Obtain the intersecting point A of inlet pressure and Maximum flow capacity in the graph. 2. The 50 is obtained when the max. flow capacity line is above the intersecting point A in the graph. Note) Make sure to select a model that has the max. flow capacity line above the obtained intersecting point. With a model that has the max. flow capacity line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD Inlet pressure (MPa) 5
26 Series Dimensions 150C to 550C P Q Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) Drain cock Gray: N.C. Black: N.O. 34 F O ø One-touch fitting S, U: With differential pressure switch (with indicator) Y Z T: With element service indicator W X R S Combination of D: With auto drain (N.O.) and H: For medium air pressure K U T D I L M øv Bracket (Accessory) N Note) 1/4 female threaded Note) 23 for 250C. Width across flats 17 H C J A E B 2 x Port size Option J: Drain guide 1/4 female threaded Width across flats 24 1/4 female threaded G Maintenance space Drain port M5 150C 250C 350C 450C 550C Port size 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 A B C D E F G Bracket related dimensions 15 H I J K T 7 U 7 L M 7 V N O 54 P 70 Q 2 R 4.5 S 1. (mm) Element Differential service pressure indicator related switch related dimensions dimensions W 24 X 37 Y 32 Z
27 Mist Separator Series Dimensions 50 Auto drain D: With auto drain (N.O.) Drain cock: Black HAA HAW AT ø One-touch fitting 34 IDF IDU IDFA IDFB Option IDH J: Drain guide 1/4 female threaded ID 10 IDG Bracket (Accessory) 85 IDK G Width across flats 24 1/4 female threaded x Port size 1, 1 1 /2 female threaded T: With element service indicator D H E F ZFC 23 SF Maintenance space Drain port M5 SFD LLB AD GD 7
28 Series Dimensions Bracket (Accessory) Drawing of view (B) () x port size 11/2, 2 female threaded Drawing of view (B) 44 Auto drain D: With auto drain (N.O.) for Drain Rc 3/8 female threaded 23 Maintenance space 3/8 female threaded Option T: With element service indicator 8
29 Micro Mist Separator Series D RoHS Can separate and remove aerosol state oil mist in compressed air and remove particles such as carbon or dust of more than 0.01 µm. Use this product as a pre-filter for compressed air for precision instruments or clean room requiring higher clean air. Modular connection is possible with D150C to 550C. (For details, refer to page 244.) D150C to 550C D (Drain cock specifications) D50/850 D (Auto drain specifications) Made to Order (For details, refer to page 250.) Note) Rated flow (L/min (ANR)) Port size Weight (kg) D150C D250C D350C D450C D550C D50 D , , , , , Note) capacity at 0.7 MPa. capacity varies depending on the operating pressure. Refer to Flow Characteristics (page 212) and Maximum Flow Capacity Line (page 211). /Free Standing Type 1, , 2 D800 D00 D00 Rated flow (L/min (ANR)) Port size 50(2B)JIS 50(2B), 80(3B), 0(4B)JIS 0(4B), 150(B)JIS K FF flange K FF flange K FF flange Weight (kg) Specifications Fluid Max. operating pressure Note 1) Min. operating pressure Proof pressure Ambient and fluid temperature Filtration rating Oil mist density at outlet Element life Note 1) With auto drain: 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) Note 2) Oil mist density at 30 mg/m 3 (ANR) blown out by compressor. Note 3) D800 to D00: 0.7 MPa Accessory Applicable model Bracket assembly (with 2 mounting screws) Caution Compressed air 1.0 MPa Note 3) 0.05 MPa 1.5 MPa 5 to 0 C 0.01 µm (Filtration efficiency:.%) Max. 0.1 mg/m 3 (ANR) Note 2) (Before saturated with oil, less than 0.01 mg/m 3 (ANR) ppm) 2 years (1 year for flange type) or when pressure drop reached 0.1 MPa D150C D250C D350C D450C D550C D50 D850 -BM1 -BM2 -BM3 -BM4 -BM5 BM5 BM57 Be sure to read before handling. Refer to front matter 43 for Safety Instructions and pages to 8 for Air Preparation Equipment Precautions. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD
30 Series D D150C to 550C Body size 150C 250C 350C 450C 550C /8 1/4 3/8 1/2 3/4 1 Options D 550C Thread type Type Nil Rc F G 1 N NPT 1 Conforms to ISO Port size Applicable body size Size 150C 250C 350C 450C 550C Accessory Nil B Bracket Bracket is included, (but not assembled). 3 The model with bracket is not available for -X15 and -X17. Drain Exhaust Specifications/Option Combinations : All types of drain exhaust specifications are available. (including drain guide, J specification) : N.C. auto drain ( C specification) is not available. : Both N.C. and N.O. auto drain ( C, D specification) are not available. Nil F H R S U T V Nil Note F H R Note S U T V Note Note Note: Only one drain exhaust method can be selected. : Not available How to Order Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) Nil X X15 X17 X2 With differential pressure gauge (GD ) With - flange 3 With differential pressure gauge (GD ) and - flange 3 N.C., N.O. auto drain, drain piping type Option 4 Nil F Rubber material: FKM H For medium air pressure (1. MPa) J Drain guide 1/4 female thread 5 R - reversal direction S With differential pressure switch (125 VAC, 30 VDC) U With differential pressure switch (30 VDC) T With element service indicator V Degreasing wash, 7 white vaseline 5 Drain piping and piping for a stop valve such as ball valve are required. Differential pressure gauge is included, (but not assembled). 7 Only body/housing is degreasing washed. Note) Order U if conformity to the EU directive is required. Auto drain 4 Nil Drain cock (Without auto drain) C N.C. auto drain D N.O. auto drain 4 Refer to Drain Exhaust Specifications/ Option Combinations. (Only one drain exhaust method can be selected.) Page for details P.251 P.252 P.252 P.253, Note) F: Rubber material: FKM FKM is used for the parts such as O-ring and gasket. H: For medium air pressure (1. MPa) Can be used up to 1. MPa at maximum. J: Drain guide 1/4 female threaded Can be pipied to the drain exhaust port. 1/4 female threaded R: - reversal direction Air flow in the separator is changed to right to left. (Air flow direction of the standard: Left to right.) T: With element service indicator Pressure drop 0.1 MPa Saturation of the separator can be observed visually. (Element life check) V: Degreasing wash, white vaseline Body/housing is degreasing washed. The lubrication grease for O-ring and gasket is changed to white vaseline. 2 S: With differential pressure switch (with indicator) Saturation of the separator can be observed visually or by an electrical signal. (Element life check) The rated contact voltage is different from U. Max. contact capacity: VA AC, W DC Rated contact voltage (max. operating current): 125 V AC (0.08 A), 30 V DC (0.33 A) Reed switch U: With differential pressure switch (with indicator) Saturation of the separator can be observed visually or by an electrical signal. (Element life check) The rated contact voltage is different from S. Max. contact capacity: W DC Rated contact voltage (max. operating current): 30 V DC (0.33 A) Reed switch
31 Micro Mist Separator Series D D50/850 D 50 Body size 50 Thread type 850 Type Nil Rc F G N NPT Port size Size Applicable body size Accessory Nil B Bracket Bracket is included, (but not assembled). 2 The model with bracket is not available for -X15 and -X17. Auto drain 3 Nil Drain cock (Without auto drain) 4 D N.O. auto drain 3 Refer to Auto Drain Specifications/Option Combinations. 4 Body size 850 is equipped with a ball valve (Rc 3/8 female threaded). Mount a piping adapter IDF-AP0 (page 245 ) to the ball valve if NPT 3/8 female threaded is required. Free standing type D 8 Body size 8 Selection 00 D800/8 to 0 Type 00 With manual drain cock With auto drain Port size Select a model in accordance with the following procedure taking the inlet pressure and the max. flow capacity into consideration. (Example) Inlet pressure: 0. MPa capacity: 5 m 3 /min (ANR) 1. Obtain the intersecting point A of inlet pressure and max. flow capacity in the graph. 2. The D50 is obtained when the max. flow capacity line is above the intersecting point A in the graph. Note) Make sure to select a model that has the max. flow capacity line above the obtained intersecting point. With a model that has the max. flow capacity line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. How to Order Option 3 Nil Nil J Drain guide 1 4 female threaded 5 X R - reversal direction X37 T With element service indicator 5 Drain piping and piping for a stop X15 valve such as ball valve are X17 required. Size 50(2B)JIS K FF flange 80(3B)JIS K FF flange 0(4B)JIS K FF flange 150(B)JIS K FF flange Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) X2 X12 Applicable body size D800, 8 D 0 D 0 Maximum Flow Capacity Line D 0 D 0 D850 D8 0 D50 D550C D450C D350C D250C With differential pressure gauge (GD ) With differential pressure switch (With indicator, 125 VAC, 30 VDC) With - flange 2 With differential pressure gauge (GD ) and - flange 2 N.C., N.O. auto drain, drain piping type White vaseline specifications Page for details P.251 P.251 P.252 P.252 P.253 P.253 Note) Refer to How to Order Bowl Auto Drain Specifications/ Assembly on page 24. Option Combinations : Available : Not available Auto drain Auto drain specifications/option specifications Option Applicable model D J R T D50 D850 Auto drain specifications N.O. auto drain Drain guide 1 4 D J Option - reversal direction R With element service indicator T capacity (m 3 /min (ANR)) HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD D150C Inlet pressure (MPa) 211
32 Series D Flow Characteristics (Representative values)/select the model under the max. flow capacity line. ( Element oil saturation Initial condition) Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. D150C D550C D 0 capacity line capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) D250C D50 D 0 capacity line capacity line capacity line D350C Air flow rate (L/min (ANR)) D8 0 Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) capacity line capacity line D450C Air flow rate (L/min (ANR)) D850 Air flow rate (m 3 /min (ANR)) capacity line capacity line 212 Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR))
33 Micro Mist Separator Series D Construction D150C to 550C, D50 q D850 Replacement Parts No. Material 4 r w Element assembly Glass fiber, others Applicable model Except option F For option F D80 /81 / 0/ 1/ 0 D150C D-EL150 D-EL150-F Component Parts No. Material Note Body Housing Sight glass Aluminum alloy Aluminum alloy Tempered glass Chrome treated Epoxy coating on inner surface Element D250C D-EL250 D-EL250-F D350C D-EL350 D-EL350-F Component Parts/Material No. 1 Filter case 2 Cover Replacement Parts No. Material 3 Element 4 Seal 5 Seal D450C D-EL450 D-EL450-F NBR NBR D550C D-EL550 D-EL550-F Element assembly: With gasket (1 pc.) and O-ring (1 pc.) Refer to page 25 for replacement of auto drain. Element assemblies for Made to Order (X, X12, X15, X17, X2, X37) are same as those for standard (see the above table). e D8 0/ 0/ 0 SGP-E, SS400 SS400 D8 0 D 0 D pcs pcs pcs pcs. O.D112 x I.D0 x T3 D50 D-EL50 O.D112 x I.D0 x T3 3 pcs. Note) Refer to How to Order Bowl Assembly on page 24. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction. Refer to dimensions on pages 214 through to 217 for details. D850 D-EL850 O.D112 x I.D0 x T3 5 pcs. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD Drain Gasket V#500 AL-1S AL-3S AL-31S 7 O-ring NBR JIS B2401G35 1 pc. JIS B2401G35 3 pcs. JIS B2401G35 5 pcs. 213
34 Series D Dimensions D150C to 550C P Q Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) Drain cock Gray: N.C. Black: N.O. 34 F O ø One-touch fitting S, U: With differential pressure switch (with indicator) Y Z T: With element service indicator W X R S Combination of D: With auto drain (N.O.) and H: For medium air pressure K U T D I L M øv Bracket (Accessory) N Note) 1/4 female threaded Note) 23 for D250C. Width across flats 17 H C J A E B 2 x port size Option J: Drain guide 1/4 female threaded Width across flats 24 1/4 female threaded G Maintenance space Drain port M5 D150C D250C D350C D450C D550C 214 Port size 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 A B C D E F G Bracket related dimensions 15 H I J K T 7 U 7 L M 7 V N O 54 P 70 Q 2 R 4.5 S 1. (mm) Element Differential service pressure indicator related switch related dimensions dimensions W 24 X 37 Y 32 Z
35 Micro Mist Separator Series D Dimensions D50 Auto drain D: With auto drain (N.O.) Drain cock: Black HAA HAW AT ø One-touch fitting 34 IDF IDU IDFA IDFB Option IDH J: Drain guide 1/4 female threaded ID 10 IDG Bracket (Accessory) 85 IDK G Width across flats 24 1/4 female threaded T: With element service indicator D H E Maintenance space Drain port 23 M5 2 x port size 1, 1 /2 female threaded F ZFC SF SFD LLB AD GD 215
36 Series D Dimensions D Bracket Accessory () View B x port size 11/2, 2 female threaded Drawing of view B Auto drain D: With auto drain (N.O.) for D850 Drain Rc 3/8 female threaded 23 Maintenance space 3/8 female threaded Option T: With element service indicator 21
37 Micro Mist Separator Series D Dimensions D800/8/ 0/ 0 D8 0 D 0 D 0 Drain ORIENTATION 3 x øh holes Label (mm) Connection (Flange) 50(2B), 80(3B)JIS K FF flange A 500 øb 300 øc 0(8B) D 300 E 1300 F 1430 G 15 H Anchor bolt M1 x L400 50(2B), 80(3B), 0(4B)JIS K FF flange M x L500 0(4B), 150(B)JIS K FF flange M x L500 HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 217
38 218
39 Micro Mist Separator with Pre-filter Series H RoHS Can separate and remove aerosol state oil mist in compressed air and remove particles such as carbon or dust of more than 0.01 µm. Use this product as a pre-filter for compressed air for precision instruments or clean room requiring higher clean air. The conventional pneumatic pressure line, series + D series have been integrated to achieve a reduction in installation space and in piping labor. Modular connection is possible with H150C to 550C. (For details, refer to page 244.) H150C to 550C H (Drain cock specifications) H50/850 H (Auto drain specifications) Made to Order (For details, refer to page 250.) H150C H250C H350C H450C H550C H50 H850 Note) Rated flow (L/min (ANR)) Port size Weight (kg) 1 8, , , , , Note) capacity at 0.7 MPa. capacity varies depending on the operating pressure. Refer to Flow Characteristics (page 222) and Maximum Flow Capacity Line below. Specifications Fluid Max. operating pressure Min. operating pressure 1 Proof pressure Ambient and fluid temperature Nominal filtration density Oil mist density at outlet Element life 1 With auto drain: 0.1 MPa (N.O. type) or 0.15 MPa (N.C. type) 2 Oil mist density at 30 mg/m 3 (ANR) blown out by compressor. Accessory Applicable model Bracket assembly (with 2 mounting screws) Selection Select a model in accordance with the following procedure taking the inlet pressure and the max. flow capacity into consideration. (Example) Inlet pressure: 0. MPa capacity: 5 m 3 /min (ANR) 1. Obtain the intersecting point A of inlet pressure and max. flow capacity in the graph. 2. The H50 is obtained when the max. flow capacity line is above the intersecting point A in the graph. Note) Make sure to select a model that has the max. flow capacity line above the obtained intersecting point. With a model that has the max. flow capacity line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. Caution Compressed air 1.0 MPa 0.05 MPa 1.5 MPa 5 to 0 C 0.01 µm (Filtration efficiency:.%) Max. 0.1 mg/m 3 (ANR) 2 (Before saturated with oil, less than 0.01 mg/m 3 (ANR) ppm) 2 years or when pressure drop reached 0.1 MPa H150C H250C H350C H450C H550C H50 H850 -BM1 -BM2 -BM3 -BM4 -BM5 BM5 BM57 Maximum Flow Capacity Line capacity (m 3 /min (ANR)) Inlet pressure (MPa) 1, , 2 HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD Be sure to read before handling. Refer to front matter 43 for Safety Instructions and pages to 8 for Air Preparation Equipment Precautions. 21
40 Series H H150C to 550C /8 1/4 3/8 1/2 3/4 1 Options H 550C Body size 150C 250C 350C 450C 550C Thread type Type Nil Rc F G 1 N NPT 1 Conforms to ISO Port size Applicable body size Size 150C 250C 350C 450C 550C Accessory Nil B Bracket Bracket is included, (but not assembled). 3 The model with bracket is not available for -X15 and -X17. Drain Exhaust Specifications/Option Combinations : All types of drain exhaust specifications are available. (including drain guide, J specification) : N.C. auto drain ( C specification) is not available. : Both N.C. and N.O. auto drain ( C, D specification) are not available. Nil F H R S U T V Nil Note F H R Note S U T V Note Note Note: Only one drain exhaust method can be selected. : Not available How to Order Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) Nil X X15 With differential pressure gauge (GD ) With - flange 3 With differential pressure gauge (GD ) and - flange 3 N.C., N.O. auto drain, drain piping type X17 X2 Option 4 Nil F Rubber material: FKM H For medium air pressure (1. MPa) J Drain guide 1/4 female threaded 5 R - reversal direction S U T With differential pressure switch (125 VAC, 30 VDC), Note) With differential pressure switch (30 VDC) With element service indicator Degreasing wash, 7 white vaseline V 5 Drain piping and piping for a stop valve such as ball valve are required. Differential pressure switch is included, (but not assembled). 7 Only body/housing is degreasing washed. Note) Order U if conformity to the EU directive is required. Auto drain 4 Nil Drain cock (Without auto drain) C N.C. auto drain D N.O. auto drain 4 Refer to Drain Exhaust Specifications/ Option Combinations. (Only one drain exhaust method can be selected.) Page for details P.251 P.252 P.252 P.253 F: Rubber material: FKM FKM is used for the parts such as O-ring and gasket. H: For medium air pressure (1. MPa) Can be used up to 1. MPa at maximum. J: Drain guide 1/4 female threaded Can be pipied to the drain exhaust port. 1/4 female threaded R: - reversal direction Air flow in the separator is changed to right to left. (Air flow direction of the standard: Left to right.) T: With element service indicator Pressure drop 0.1 MPa Saturation of the separator can be observed visually. (Element life check) V: Degreasing wash, white vaseline Body/housing is degreasing washed. The lubrication grease for O-ring and gasket is changed to white vaseline. 2 S: With differential pressure switch (with indicator) Saturation of the separator can be observed visually or by an electrical signal. (Element life check) The rated contact voltage is different from U. Max. contact capacity: VA AC, W DC Rated contact voltage (max. operating current): 125 V AC (0.08 A), 30 V DC (0.33 A) Reed switch U: With differential pressure switch (with indicator) Saturation of the separator can be observed visually or by an electrical signal. (Element life check) The rated contact voltage is different from S. Max. contact capacity: W DC Rated contact voltage (max. operating current): 30 V DC (0.33 A) Reed switch
41 Micro Mist Separator with Pre-filter Series H H50/850 H 50 Body size Thread type Type Nil Rc F G N NPT Size Port size Applicable body size Nil B Accessory Bracket Bracket is included, (but not assembled). 2 The model with bracket is not available for -X15 and -X17. How to Order Nil X X37 X15 X17 X2 X12 Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) With differential pressure gauge (GD ) With differential pressure switch (With indicator, 125 VAC, 30 VDC) With - flange 2 With differential pressure gauge (GD ) and - flange 2 N.C., N.O. auto drain, drain piping type White vaseline specifications Option 3 Nil J Drain guide 1 4 female threaded 5 R - reversal direction T With element service indicator 5 Drain piping and piping for a stop valve such as ball valve are required. Auto drain 3 Nil Drain cock (Without auto drain) 4 D N.O. auto drain 3 Refer to Auto Drain Specifications/Option Combinations. 4 Body size 850 is equipped with a ball valve (Rc3/8 female threaded). Mount a piping adapter IDF-AP0 (page 245) to the ball valve if NPT3/8 female threaded is required. Page for details P.251 P.251 P.252 P.252 P.253 P.253 Note) Refer to How to Order Bowl Assembly on page 24. Auto Drain Specifications/Option Combinations : Available : Not available Auto drain specifications/option Auto drain specifications Option Applicable model D J R T H50 H850 Auto drain specifications Option N.O. auto drain Drain guide reversal direction D J R With element service indicator T HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 221
42 Series H Flow Characteristics (Representative values)/select the model under the max. flow capacity line. ( Element oil saturation Initial condition) Note) Compressed air over max. flow capacity line in the table below may not meet the specifications of the product. H150C H450C H850 Inlet air pressure Air pressure Inlet air pressure capacity line capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) H250C H550C Inlet air pressure Air pressure capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) H350C H50 Inlet air pressure Air pressure capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) 222
43 Micro Mist Separator with Pre-filter Series H Construction H150C to 550C, H50 H850 q r w Replacement Parts No. Material 4 Element assembly Glass fiber, others Applicable model Except option F For option F e Component Parts No. Material Note Body Housing Sight glass Aluminum alloy Aluminum alloy Tempered glass Chrome treated Epoxy coating on inner surface H150C H-EL150 H-EL150-F H250C H-EL250 H-EL250-F H350C H-EL350 H-EL350-F Note) Refer to How to Order Bowl Assembly on page 24. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction. Refer to dimensions on pages 224 through to 22 for details. H450C H-EL450 H-EL450-F H550C H-EL550 H-EL550-F Element assembly: With gasket (1 pc.) and O-ring (1 pc.) Refer to page 25 for replacement of auto drain. Element assemblies for Made to Order (X, X12, X15, X17, X, X2, X37) are same as those for standard (see the above table). H50 H-EL50 H850 H-EL850 HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 223
44 Series H Dimensions H150C to 550C P Q Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) Drain cock Gray: N.C. Black: N.O. 34 F O ø One-touch fitting D I 1/4 female threaded S, U: With differential pressure switch (with indicator) Y Z T: With element service indicator W X R S Combination of D: With auto drain (N.O.) and H: For medium air pressure H C K J U T L M øv Bracket (Accessory) A E B N 2 x port size 1/4 female threaded Option J: Drain guide 1/4 female threaded Width across flats 24 G Maintenance space Drain port M5 H150C H250C H350C H450C H550C 224 Port size 1/8, 1/4 1/4, 3/8 3/8, 1/2 1/2, 3/4 3/4, 1 A B C D E F G Bracket related dimensions 15 H I J K T 7 U 7 L M 7 V N O 54 P 70 Q 2 R 4.5 S 1. (mm) Element Differential service pressure indicator related switch related dimensions dimensions W 24 X 37 Y 32 Z
45 Micro Mist Separator with Pre-filter Series H Dimensions H50 Auto drain D: With auto drain (N.O.) Drain cock: Black ø One-touch fitting 34 HAA HAW AT IDF IDU IDFA IDFB Option IDH Bracket (Accessory) 85 J: Drain guide 1/4 female threaded ID IDG IDK Width across flats 2 x port size 1, 1 1 /2 female threaded 1/4 female threaded G T: With element service indicator 55 D H 37 E F ZFC Drain port SF Maintenance space SFD LLB AD GD 225
46 Series H Dimensions H Bracket Accessory () View B x port size 11/2, 2 female threaded Drawing of view B Auto drain D: With auto drain (N.O.) for H Drain Rc 3/8 female threaded 3/8 female threaded Maintenance space Option T: With element service indicator 22
47 Super Mist Separator Series E RoHS Can separate and adsorb aerosol state fine oil particles in compressed air and change the oil lubricating compressed air to oilless air or equivalent. Use this product for filtration of compressed air requiring higher clean air for painting lines, compressed air for clean rooms and/or equipment where oils must be avoided. Indicates the filter element life by a color change. Accordingly, the replacement time can be judged visually. (A red color spot indicates the replacement time.) Caution By all means the series should be used as a pre-filter. Modular connection is possible with E150C to 550C. (For details, refer to page 244.) E150C to 350C E450C/550C E150C E250C E350C E450C E550C E50 E850 Note) Rated flow (L/min (ANR)) Port size Weight (kg) 1 8, , , , , Note) capacity at 0.7 MPa. capacity varies depending on the operating pressure. Refer to Flow Characteristics and Maximum Flow Capacity Line (page 230). Specifications Fluid Max. operating pressure Min. operating pressure Proof pressure Ambient and fluid temperature Filtration rating Cleanliness at outlet Oil mist density at outlet Element life Accessory Applicable model Bracket assembly (with 2 mounting screws) Caution 1, , 2 Compressed air 1.0 MPa 0.05 MPa 1.5 MPa 5 to 0 C 0.01 µm (Filtration efficiency:.%) Less than 0 particles of 0.3 µm or larger per cubic foot [Less than 35 particles per liters (ANR)] Max mg/m 3 (ANR) ( ppm) 1. Element color indicator (Replace the element when a red color spot occurred on the surface.) 2. Even if a red color spot does not appear on the surface, the replacement interval for the element is when the pressure drop reaches 0.1 MPa or after two years of operation, whichever comes first. E150C E250C E350C E450C E550C E50 E850 -BM1 -BM2 -BM3 -BM4 -BM5 BM5 BM57 Be sure to read before handling. Refer to front matter 43 for Safety Instructions and pages to 8 for Air Preparation Equipment Precautions. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD E E50/850 Made to Order (For details, refer to page 250.) 227
48 Series E E150C to 550C How to Order E 550C Body size 150C 250C 350C 450C 550C Thread type Type Nil Rc F G 1 N NPT 1 Conforms to ISO Option Nil F Rubber material: FKM H For medium air pressure (1. MPa) R - reversal direction V Degreasing wash, 3 white vaseline 3 Only body/housing is degreasing washed. Accessory Nil B Bracket 2 2 Bracket is included, (but not assembled). Port size Size 1/8 1/4 3/8 1/2 3/4 1 Applicable body size 150C 250C 350C 450C 550C Options F: Rubber material: FKM FKM is used for the parts such as O-ring and gasket. H: For medium air pressure (1. MPa) Can be used up to 1. MPa at maximum. R: - reversal direction Air flow in the separator is changed to right to left. (Air flow direction of the standard: Left to right.) V: Degreasing wash, white vaseline Body/housing is degreasing washed. The lubrication grease for O-ring and gasket is changed to white vaseline. 228
49 Super Mist Separator Series E E50/850 E 50 Body size Size Thread type Type Nil Rc F G N NPT Port size Applicable body size How to Order Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to the page Made to Order.) Nil X12 White vaseline specifications Option Nil R - reversal direction Accessory Nil B Bracket Bracket is included, (but not assembled). Page for details P.253 Note) Refer to How to Order Bowl Assembly on page 24. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 22
50 Series E Flow Characteristics (Representative values) /Select the model under the max. flow capacity line. (Element initial condition) Note) Compressed air over max. flow capacity line in the table below may not meet the specifications of the product. E150C E450C E50 capacity line capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) E250C E550C E850 capacity line capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) E350C capacity line Maximum Flow Capacity Line Air flow rate (L/min (ANR)) Selection Select a model in accordance with the following procedure taking the inlet pressure and the max. flow capacity into consideration. (Example) Inlet pressure: 0. MPa capacity: 5 m 3 /min (ANR) 1. Obtain the intersecting point A of inlet pressure and max. flow capacity in the graph. 2. The E50 is obtained when the max. flow capacity line is above the intersecting point A in the graph. capacity (m 3 /min (ANR)) Note) Make sure to select a model that has the max. flow capacity line above the obtained intersecting point. With a model that has the max. flow capacity line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. 230 Inlet pressure (MPa)
51 Super Mist Separator Series E Construction E150C to 550C q E50/850 Component Parts No. Material Note Body Housing Sight glass Aluminum alloy Aluminum alloy Tempered glass Replacement Parts No. Material 4 r w Element assembly Glass fiber, others Applicable model Except option F For option F Chrome treated Epoxy coating on inner surface E150C E-EL150 E-EL150-F E250C E-EL250 E-EL250-F E350C E-EL350 E-EL350-F E450C E-EL450 E-EL450-F Element assembly: With gasket (1 pc.) and O-ring (1 pc.) Element assemblies for Made to Order (X12, X) are same as those for standard (see the above table). e Note) Refer to How to Order Bowl Assembly on page 24. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction. Refer to dimensions on pages 232 through to 234 for details. E550C E-EL550 E-EL550-F E50 E-EL50 E850 E-EL850 HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 231
52 O B A S R T P Q F E Bracket (Accessory) M øw I J V D N L U K G C Maintenance space E150C to 350C (mm) E150C E250C E350C A Port size Bracket related dimensions /8, 1/4 1/4, 3/8 3/8, 1/2 B C D E F G I N 5 80 J K U 7 V 7 L M 7 W 12 O P Q R S T Dimensions Series E 2 x port size 232
53 E R Q P D T Bracket (Accessory) L M U N øw V J K C I D H G Maintenance space A B O F E450C/550C E450C E550C A Port size Bracket related dimensions /2, 3/4 3/4, 1 B 24 C D 122 E 3 3 F 122 G 15 H 3 44 I 172 N 0 0 J K U V L M W O 55 5 P Q 50 0 R 88 2 T (mm) Dimensions Super Mist Separator Series E 2 x port size 233 HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD E
54 M Series E Dimensions E50/850 3 Bracket Accessory View B K N L 2 x port size Drawing of view B Maintenance space Port size A E50 1, E , B C D 10 2 E F 10 2 G H I J K Bracket related dimensions L 24 M N O 85 1 P Q 7 1 R (mm) S
55 Odor Removal Filter Series F RoHS Efficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. Can remove odor and gas ingredients in compressed air. Activated carbon element with large filtration area. Easy replacement of elements. Modular connection is possible with F150C to 550C. (For details, refer to page 244.) F150C to 350C F50/850 F450C/550C F Port size Note) Rated flow (L/min (ANR)) Weight (kg) F150C F250C F350C F450C F550C F50 F , , , , Note) capacity at 0.7 MPa. capacity varies depending on the operating pressure. Refer to Flow Characteristics (page 238) and Maximum Flow Capacity Line (page 237). /Free Standing Type Note) F800 to F00: 0.7 MPa 3 4, 1 F800 F00 F00 Rated flow (L/min (ANR)) Port size 50 (2B) JIS 50 (2B), 80 (3B),0 (4B) JIS 0 (4B),150 (B) JIS K FF flange K FF flange K FF flange Weight (kg) Specifications Fluid Max. operating pressure Min. operating pressure Proof pressure Ambient and fluid temperature Nominal filtration rating Cleanliness at outlet Oil mist density at outlet Element life Accessory (Option) Applicable model Bracket assembly (with 2 mounting screws) Caution Compressed air 1.0 MPa Note) 0.05 MPa 1.5 MPa 5 to 0 C 0.01 µm (Filtration efficiency:.%) Less than 0 particles of 0.3 µm or larger per cubic foot [Less than 35 particles per liters (ANR)] (The E series is required on the inlet side.) Max mg/m 3 (ANR) ( ppm) (The E series is required on the inlet side.) 1. Replace the element when you smell oil on the outlet side. 2. Even if the deodorization performance is normal, the replacement interval for the element is when the pressure drop reaches 0.1 MPa or after two years of operation, whichever comes first. F150C F250C F350C F450C F550C F50 1, , 2 F850 -BM1 -BM2 -BM3 -BM4 -BM5 BM5 BM57 Be sure to read before handling. Refer to front matter 43 for Safety Instructions and pages to 8 for Air Preparation Equipment Precautions. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD Made to Order (For details, refer to page 250.) 235
56 Series F F150C to 550C How to Order F 550C Body size 150C 250C 350C 450C 550C Thread type Type Nil Rc F G 1 N NPT 1 Conforms to ISO Option Nil F Rubber material: FKM H For medium air pressure (1. MPa) R - reversal direction V Degreasing wash, 3 white vaseline 3 Only body/housing is degreasing washed. Accessory Nil B Bracket 2 2 Bracket is included, (but not assembled). Port size Size 1/8 1/4 3/8 1/2 3/4 1 Applicable body size 150C 250C 350C 450C 550C Options F: Rubber material: FKM FKM is used for the parts such as O-ring and gasket. H: For medium air pressure (1. MPa) Can be used up to 1. MPa at maximum. R: - reversal direction Air flow in the separator is changed to right to left. (Air flow direction of the standard: Left to right.) V: Degreasing wash, white vaseline Body/housing is degreasing washed. The lubrication grease for O-ring and gasket is changed to white vaseline. 23
57 Odor Removal Filter Series F How to Order F50/850 F 50 Body size Selection Thread type Type Nil Rc F G N NPT F 80 0 Body size Size Vessel shape Free standing type Port size Applicable body size Free standing type F800 to 00 Port size Size 50 (2B) JIS K FF flange (3B) JIS K FF flange 40 0 (4B) JIS K FF flange (B) JIS K FF flange Select a model in accordance with the following procedure taking the inlet pressure and the max. flow capacity into consideration. (Example) Inlet pressure: 0. MPa capacity: 5 m 3 /min (ANR) 1. Obtain the intersecting point A of inlet pressure and max. flow capacity in the graph. 2. The F50 is obtained when the max. flow capacity line is above the intersecting point A in the graph. Made to Order ( How to Order and the applicable models are different from those shown on this page. Be sure to refer to Made to Order.) Nil Page for details X12 White vaseline specifications P.253 Option Nil R - reversal direction Accessory Nil B Bracket Bracket is included, (but not assembled). Note) Make sure to select a model that has the max. flow capacity line above the obtained intersecting point. With a model that has the max. flow capacity line below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. Applicable body size Maximum Flow Capacity Line capacity (m 3 /min (ANR)) Note) Refer to How to Order Bowl Assembly on page 24. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD Inlet pressure (MPa) 237
58 Series F Flow Characteristics (Representative values)/select the model under the max. flow capacity line. (Element initial condition) Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. F150C F550C F00 capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) F250C F50 F00 capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) F350C F800 capacity line F450C Air flow rate (L/min (ANR)) F850 Air flow rate (m 3 /min (ANR)) capacity line capacity line Air flow rate (L/min (ANR)) Air flow rate (m 3 /min (ANR)) 238
59 Odor Removal Filter Series F Construction F150C to 550C q F50/850 r w Component Parts No Body Housing Sight glass Material Aluminum alloy Aluminum alloy Tempered glass Replacement Parts No. Material 4 Element assembly Glass fiber, others Element assembly: With gasket (1 pc.) and O-ring (1 pc.) Element assemblies for Made to Order (X12, X) are same as those for standard (see the above table). F800/00/00 N-4 Pressure outlet ( side) N-1 Applicable model Except option F For option F Drain N-3 F150C F-EL150 F-EL150-F e Note Chrome treated Epoxy coating on inner surface F250C F-EL250 F-EL250-F N-5 Pressure outlet ( side) N-2 Element F350C F-EL350 F-EL350-F Component Parts/Material No. 1 Filter case 2 Cover Replacement Parts No. Material 3 4 Element Seal NBR 5 Seal NBR Gasket 7 O-ring Note) Refer to How to Order Bowl Assembly on page 24. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction. Refer to dimensions on pages 240 to 243 for details. F450C F-EL450 F-EL450-F V#500 AL-1S NBR F550C F-EL550 F-EL550-F F50 F-EL50 F800/00/00 SGP-E: SS400 SS400 F850 F-EL850 F800 F00 F pcs pcs pcs pcs. O.D112 x I.D0 O.D112 x I.D0 O.D112 x I.D0 x T3 1 pc. x T3 3 pcs. x T3 5 pcs. AL-3S 3 pcs. AL-31S JIS B2401G35 JIS B2401G35 JIS B2401G35 1 pc. 3 pcs. 5 pcs. HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 23
60 O B A S R T P Q F E M øw I J V D N L U K G C 2 x port size F150C F250C F350C A /8, 1/4 1/4, 3/8 3/8, 1/2 B C D E F G I N 5 80 J K U 7 V 7 L M 7 W 12 O P Q R S T F150C to 350C Dimensions Bracket (Accessory) Maintenance space Port size Bracket related dimensions (mm) 240 Series F
61 E R Q P D T L M U N øw V J K C I D H G A B O F 2 x port size F450C F550C A /2, 3/4 3/4, 1 B 24 C D 122 E 3 3 F 122 G 15 H 3 44 I 172 N 0 0 J K U V L M W O 55 5 P Q 50 0 R 88 2 T F450C/550C Dimensions Bracket (Accessory) Maintenance space (mm) Port size Bracket related dimensions 241 Odor Removal Filter Series F HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD F
62 Series F Dimensions F50/850 3 Bracket Accessory View B K N L M 2 x port size Drawing of view B Maintenance space F50 F850 Port size A B C D E 1, , F 10 2 G H I K L 24 Bracket related dimensions M N O 85 1 P Q 7 1 R (mm) S
63 Odor Removal Filter Series F Dimensions F800/00/00 F800 F00 F00 Drain Connection (Flange) 50 (2B) JIS K FF flange 50 (2B), 80 (3B), 0 (4B) JIS K FF flange 0 (4B), 150 (B) JIS K FF flange ORIENTATION 3 x øh holes Label (mm) A 500 øb 330 øc 0(8B) D 300 E 70 F 10 G 120 H Anchor bolt M1 x L M x L M x L500 HAA HAW AT IDF IDU IDFA IDFB IDH ID IDG IDK G D H E F ZFC SF SFD LLB AD GD 243
64 Optional Accessories Spacer for Modular Connection Select a spacer from those listed below when combining modular type 2C to 22C, 150C to 550C. The spacer must be ordered separately. (Note: Spacer with bracket (Y0T to Y00T) cannot be used.) Caution Modular connection Mount the attached bracket on one side when connecting 2 sets. Mount the attached brackets on both sides when connecting 3 sets or more. As a guideline for the number of brackets, one bracket should be mounted for every 2 products. Combination examples of modular applicable products Arrangement example Arrangement example H250C- B 1 pc. H250C- B 1 pc. E250C 1 pc. E250C 1 pc. Spacer: Y300 1 pc. Y300 F250C- B 1 pc. Bracket Y300 2 pcs E250C E250C F250C- B Spacer H250C- B 15 H250C- B 23 D Center of / ports Y0 Y400 1 RELEASE 2 C B X X-X Y0 Y300 Y400 Y500 Y00 A B C D C, 150C 4C, 250C 8C, 350C 11C, 450C 22C, 550C Seal X A (Spacer width) Replacement Parts Seal 244 Material HNBR Y0 Y0P-01S Y300 Y300P-00S Part no. Y400 Y400P-00S Y500 Y500P-00S Y00 Y00P-00S
Compressed Air Cleaning Filter Series
Compressed Air Cleaning Filter For Water, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! AMG C, AFF C, AM C, AMD C AMH C, AME C, AMF C Uses the
More informationCompressed Air Cleaning Filter Series
Compressed Air Cleaning Filter For Water, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! AMG C, AFF C, AM C, AMD C AMH C, AME C, AMF C Uses the
More informationModel Note) Rated flow (l/min (ANR)) Port size Mass (kg) 1 8, , 3 8. Specifications Fluid
Water Separator RoHS Can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element
More informationNote) Rated flow (l/min (ANR)) Port size 1 8, , , , , 1 1, , 2
Mist Separator Series ohs Can remove oil mist in compressed air and separate and remove particles such as rust or carbon of more than 0.3 µm. Modular connection is possible with 150C to 550C. (For details,
More informationCompressed Air Cleaning Filter Series
Compressed Air Cleaning Filter For Water, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! AMG C, AFF C, AM C, AMD C AMH C, AME C, AMF C Uses the
More informationMicro Mist Separator. Model. Note) 1 8, , , , , 1. Model/Free Standing Type. Model AMD (2B)JIS 10K FF flange
Can separate and remove aerosol state oil mist in compressed air and remove particles such as carbon or dust of more than 0.01 μm. Use this product as a pre-filter for compressed air for precision instruments
More informationOdor Removal Filter. Model. Note) 1 8, , , , 3 4. Model/Free Standing Type AMF (2B)JIS 10K FF flange
fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. an remove odor and gas ingredients
More informationSuper Mist Separator. Note) Rated flow (l/min (ANR)) 1 8, , , , , 1
Super ist Separator Series AE an separate and adsorb aerosol state fine oil particles in compressed air and change the oil lubricating compressed air to oilless air or equivalent. Use this product for
More informationModel. Port size (Nominal size B) Weight (kg) 1/ 8, 1/ 4, 3/ 8 1/ 4, 3/ 8, 1/ 2 3/ 8, 1/ 2, 3/ 4 1/ 2, 3/ 4, 1 3/ 4, 1 1, 11/ 2 11/ 2, 2
Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odour in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,
More informationStandard Specifications. Model. Port (Bypass lubrication adapter)
Booster Lube Series 900 Centralized control of multi-point lubrication Stable oil feeding with a micromist Through the use of a booster, a pressure that is higher than that of the main air passage can
More informationStandard Specifications. Model. Port (Bypass lubrication adapter)
Centralized control of multi-point lubrication Stable oil feeding with a micromist Through the use of a booster, a pressure that is higher than that of the main air passage can be supplied. This difference
More informationMiniature Regulator Series ARJ310
Miniature Regulator Series 30 Compact and lightweight (Main body 65 g) 8.3 Improved flow characteristics 0. 0. 0 00 00 300 400 500 Allows smaller mounting pitch 8.8mm 0-M5 30-0 Inlet pressure: MPa Accommodates
More informationSuction Filter with Case. Specifications. Fluid Operating pressure Operating temperature Cover/Case. Model/Rated Flow Rate. Model
Suction Filter with Case FH99 Series RoHS Compact and lightweight The compact and lightweight design employs an aluminum casted housing. Prevents pump cavitation The inlet size is larger than the outlet
More information1 Pneumatics. Transmitters VR4151 VR4152 VR1210 VR1220 VR1210F VR1220F VR1211F VR VR3200 VR3201 VR3100 VR3110
Best 1 Pneumatics Transmitters Relay valve P. 1900 Side piping: 30 x 53 x 91 Bottom piping: 30 x 8 x 91 VR151 VR152 Effective area (mm 2 ) Number of ports Function 7 5 Metal Spool Shuttle valve P. 1902
More informationPrecision Clean Regulator
Precision Clean Regulator Series AR45 AMR ARM -A VY AP00 High precision, low flow consumption stainless steel regulator 869 Precision Clean Regulator Series High precision, low flow consumption stainless
More informationSUB-LINE FILTERS CONTENTS
ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORES PRODUCTS SUB-LE FILTERS CONTENTS SUB-LE FILTERS Features, Handling Instructions and Precautions 155 Line Filters Specifications,
More informationAir / Mist / Micro mist filter. Air Treat ent Unit
Air / Mist / Micro mist filter Air Treat ent Unit CONTENTS WATER SEPARATOR PRECISION FILTER Page 4 MAMG Water separator Page 6 Page 8 Page 1 Page 12 MAMB MAMD MAMM MAMF 3 μm.3 μm.1 μm.1 μm + Deodorization
More informationTransmitters: Relay Valve VR4151/4152
Relay Valve VR4151/4152 Appropriate output sequences are affected according to the signal received from the mechanical valve. VR4151 VR4152 Precautions Be sure to read before handling. Refer to pages 5-11-2
More informationStandard Specifications. Model IN side OUT side Fluid Proof pressure Maximum operating pressure
Miniature Regulator Series ARJ1020F 2 Construction/Dimensions Lock nut M8 X 0.75 Panel screw Panel mounting hole Precautions Be sure to read before handling. Refer to pages 14-21-3 to 14-21-4 for Safety
More informationALB900 Series. Standard Specifications. Model. Port (Bypass lubrication adapter)
Centralized control of multi-point lubrication Stable oil feeding with a micromist Through the use of a booster, a pressure that is higher than that of the main air passage can be supplied. This difference
More informationSeries AN /Series AMC
s/exhaust Cleaner / Noise reduction Nominal filtration rating (Reference values) Oil mist removal ratio Standard type Low back pressure Compact and easy mounting 00 30 db (A) 00 µm 50 µm 5-0- Compact type
More informationSeries AV2000/3000/4000/5000
Soft Start-up Valve Series AV/3/4/5 Series introduced! A start-up valve that gradually increases supply pressure during start up and rapidly exhausts system air when the supply air is shut off AC AV AU
More informationReady for outdoor use too!
Filter/regulator assured for outdoor use New Product Filter/regulator series First in the industry FILTER REGULATOR FOR DOOR USE Ready for outdoor use too! Improved outdoor durability due to the exterior
More informationHydraulic Filters. Element (µm) nominal filtration. Port size. Micromesh 74, 105, 149 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 3 1/2, 4
Hydraulic Filters Series Series Operating pressure Port size (µm) nominal filtration Accessory (Option) Page Vertical Suction Filter Series FHIA Suction Filter with ase Series FH Suction Guard Series FHG
More informationCoolant (oil-based, water-soluble) Weak alkali-based cleaning fluid Cutting fluid Industrial water. Variations. Number of elements
Bag Filter Series Optimum for the large flow filtration Easy maintenance Main operating fluids For other kinds of fluids, please contact SMC. With safety mechanism Employs proprietary SMC latch mechanism
More informationThe filters for hydraulic fluids are used to protect each component in a hydraulic circuit. Port size. Micromesh 74, 105, 149
Hydraulic ilters H Series The filters for hydraulic fluids are used to protect each component in a hydraulic circuit. RoHS H Series Operating Port size Element (µm) nominal filtration Accessory (Option)
More informationMiniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure
Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing
More informationSpeed Controller with One-touch Fitting
Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle
More information5.22 A IR PREPARATION FILTERS: HIGH EFFICIENCY H IGH FLOW AIR FILTER SERIES AF AF (1 1 2) AF (2) AF (1 1 2) AF (2) S TOCKED
5.22 FILTERS: HIGH EFFICIENCY H IGH FLOW AIR FILTER SERIES AF Port Sizes 1 1 2-2 Rc 5µm filter element High efficiency drainage Bowl guard standard AIR FILTER MODELS AF800/900 AIR FILTER MODELS AF811/911
More informationSpeed Controller with One-touch Fitting
Speed Controller with One-touch Fitting S Series Push-lock Type Reduces labor time! Easy to use Easy to lock Unlock Push-lock type Lock Improved tube insertion/removal Max. Insertion force: 30% (8 N) reduction
More information5-27 A IR PREPARATION FILTERS: HIGH FLOW H IGH FLOW AIR FILTER SERIES AF AF (1 1 2) AF (2) S TOCKED AF (1 1 2) AF (2)
查询 ARJ1020F-M5-06 供应商 H IGH FLOW AIR FILTER SERIES AF A IR PREPARATION 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 FILTERS: HIGH FLOW 5-27 Port Sizes 1 1 2-2 Rc 5µm filter element High efficiency drainage Bowl guard standard
More informationKAMG Accessory
KAMG250~850 series Drain Separator KAMG350-04 - - 4 KAMG250-02 : Rc(PT) /4 KAMG250-03 : Rc(PT) 3/8 KAMG350-03 : Rc(PT) 3/8 KAMG350-04 : Rc(PT) /2 KAMG450-06 : Rc(PT) 3/4 KAMG550-06 : Rc(PT) 3/4 KAMG550-0
More informationClean Air Module. Digital flow switch Regulator ON/OFF valve Restrictor Filter
Clean Air Module Series Digital flow switch Regulator ON/OFF valve Restrictor Filter Modularizes clean equipment (Reduced piping man-hours/space-saving). Easily obtains clean air. Built-in one-touch fitting
More informationSpeed Controller with Indicator
Speed Controller with Indicator The numerical indication of flow rate knob rotations reduces flow setting time and setting errors! Elbow Universal Brass Electroless nickel plated RoHS Stainless steel 1
More informationSpecifications. Fluid Operating pressure range Proof pressure Operating temperature range Filtration Element proof pressure differential
Air Suction Filter Series ZFA Prevents vacuum equipment trouble due to airborne contaminants. The collected dust does not remain in the case. Dust is removed easily at the time the filter element is replaced.
More informationCompact Proportional Solenoid Valve
Compact Proportional Solenoid Valve Series Repeatability: % or less Hysteresis:1% or less Fluid Flow rate control range Note) Series Air, Inert gas to L/min to L/min Note) Varies depending on the model.
More informationSpecifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication
Hand Valve VH Series VH0 Specifications VH0 Fluid Proof pressure Max. operating VH00/00/00 pressure VH0 Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa.0 MPa MPa
More informationExhaust Cleaner for Clean Room. Body size. Symbol Nil. Size 1/4 standard 3/8 standard 1/2 standard. Element construction. Stage 2 stage.
Exhaust Cleaner for Clean oom Series ohs An exhaust cleaner that can be used inside a clean room How to Order 0 0 Exhaust air cleanliness: Equivalent to ISO Class (Class 0 ed.std.0) (Consult SMC in advance,
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationAir Preparation Products
Air Preparation Products Series Series Filter Regulator Lubricator (FRL) www.asco.com Table of Contents / Series Product Overview 2 Particulate Filter 4 Coalescing Filter 8 Adsorber Activated Carbon 8
More informationAir preparation equipment. Supply of compressed air (1 or P) Exhaust (3, 5 or E, R) Silencer. Filter with manual water drain
13 Supply of compressed air (1 or P) Exhaust (3, 5 or E, R) Silencer Filter with manual water drain Filter with automatic water drain Pressure regulator with secondary exhaust Lubricator FRL filter/regulator/lubricatorassembly
More informationCircuit of directional control valve and regulator. Simplifying circuit design. Space saving and piping. work eliminated. Automating pressure control
Port Electro-Pneumatic Proportional Valve Series 000/000 Capable of actuating a cylinder and performing analog control of pressurization alone can be used to switch and actuate a cylinder and to perform
More informationSpecifications. Model/Rated Flow Rate. Accessory/Option. Differential pressure indicator
Oil Filter FH150 Series RoHS ompact and lightweight The compact and lightweight design employs an aluminum alloy cover. Easy maintenance The element slides into place, making it easy to install and remove.
More informationSpeed Controller with One-touch Fitting AS13 1F-M3 AS13 1F-M5. Specifications
Speed Controller with One-touch Fitting Series Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube
More informationCoolant (oil-based, water-soluble) Weak alkali-based cleaning fluid Cutting fluid Industrial water. Variations. Number of elements
Bag Filter Series Optimum for the large flow filtration Easy maintenance Main operating fluids For other kinds of fluids, please contact SMC. With safety mechanism Employs proprietary SMC latch mechanism
More informationRotary Table/Vane Style
Rotary Table/Vane Style Series Size: 1, 3, 7, 20 Table top deflection mm or less High Precision Peripheral table deflection mm or less X Series B Series A 147 Rotary Table Values inside ( ) are for Series
More informationSpecifications VH600. Ambient temperature and operating fluid temperature. Operating angle Lubrication. Semi-standard
Hand Valve Series VH Specifications Fluid Proof pressure Max. operating VH00/00/00 pressure VH00 Ambient temperature and operating fluid temperature Air.5 MPa.0 MPa MPa -5 to 0 C (No freezing) VH0 VH00
More informationZFC Series. Air Suction Filter. In-line Type with One-touch Fittings
Air Suction Filter ZFC Series N402 IN/OUT straight piping Lightweight molded resin parts Cartridge type element replacement One-touch fittings for easy installation and removal Series ZFC An in-line type
More informationSpecifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. 3 (Closed center) 3/4, 1 3 (Exhaust center)
Hand Valve Series VH Specifications VH VH Fluid Proof pressure Max. operating VH// pressure VH Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa. MPa MPa 5 to C
More informationAdded 100 mm and 150 mm lengths. Actuators 10% Air leakage 20% Air blow 70% Current model
Blow Gun Series 20% reduction in power consumption with the SMC Blow gun + S coupler + Coil tube 10% reduction with the Blow gun () only RoHS With cover Extension nozzle Added mm and 150 mm lengths Pressure
More informationAir Suction Filter. Series ZF. Prevent from occurring vacuum equipment trouble due to dust from vacuum pad ZFA ZFB ZFC
Air Suction Filter Series ZF Prevent from occurring vacuum equipment trouble due to dust from vacuum pad Series ZFA ZF Universal joint type Features Long maintenance cycle type (Large filter surface) Adaptable
More informationF1000/F3000/F4000/F8000 Series
Air filter F000//F4000/F8000 Series Dust removal µm element and tar removal 0.3 µm of element, (F000 series excluded) port size: Rc/8 to Rc JIS symbol CAD DATA AVAILABLE. Specifications Descriptions F000
More informationPD3/PDV3-20A/25A/40A Series
Pilot operated 2-port valve for dust collector control (Large port size dust collector valve) PD3/PDV3-20A/25A/40A Series Air operated/with solenoid valve Port size: Rc3/4, Rc1, : Rc1 1 /2-: φ48, Rc1 1
More informationKSI Filtertechnik GmbH Siemensring D Willich Tel Fax
BA SIC.LINE Rev 1.0.1 Page 1 of 9 KSI Filtertechnik GmbH Siemensring 54-56 D-47877 Willich Tel. +49 21 54 89 108-0 Fax +49 21 54 89108-282 www.ksi.eu mail@ksi.eu ECOCLEAN Compressed air filters new generation
More informationSeries IW. Filter Regulator
Standard Specifications Model IW212 IW213 IW215 IW222 Adjustable type (Basic) Fixed type Maximum supply pressure Max. 1. MPa.3 to 1. MPa Set pressure.2 to.2 MPa.2 to.3 MPa.2 to.5 MPa.14 MPa Air consumption
More informationCircuit of directional control valve and regulator. Simplifying circuit design. Space saving and piping. work eliminated. Automating pressure control
Port Electro-Pneumatic Proportional Valve Series VER000/000 Capable of actuating a cylinder and performing analog control of pressurization VER alone can be used to switch and actuate a cylinder and to
More informationSeries VCHR. Direct Operated Regulator for 6.0 MPa (Relieving Type) Service life: 10 million cycles. How to Order
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationSeries AN /Series AMC
s/exhaust Cleaner / Noise reduction Nominal filtration rating (eference values) Oil mist removal ratio Standard type Low back pressure Compact and easy mounting 00 30 db (A) 00 µm 50 µm 5-0-2 Compact type
More informationPower Valve: Economy Valve. Standard Specifications. Model VEX55-04
Three functions (pressure regulator, switching valve, and speed controller) are provided by a single valve. The conventional valve combination circuit has been condensed into a single valve. A large capacity
More informationPrecision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8
Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole
More informationStandard Specifications. Fluid Standard specifications. VH600 Ambient and fluid temperature Operating angle Lubrication. Optional Specifications
Hand Valve Series Standard Specifications Fluid Standard specifications Max.operating,, pressure Ambient and fluid temperature Operating angle Lubrication Air.5MPa.MPa MPa 5 to C (No freezing) 9 Not required/when
More informationElectro-pneumatic Proportional Valve. Specifications. Model Flow type Pressure type VEF2121
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 6-580 www.cmafh.com VEF Port Port Applicable power Body size Body size Electro-pneumatic Proportional
More informationW1000/W3000/W4000/W8000 Series
Filter and W/W/W/ Series New Series of m elements for dust removal, and m elements for tar removal : / to JIS symbol Specifications Descriptions Appearance W W W nic sensor Pressure Working fluid Max.
More informationITVX Series. Stepless control of air pressure proportional to an electrical signal. Supply pressure: 5.0 MPa
5.0 MPa Maximum Supply Pressure High Pressure Electro-Pneumatic Regulator X Series This product is only for blowing gas. This product does not have sufficient pressure control for other applications (driving,
More informationRotary Table/Vane Style
Rotary Table/Vane Style Series MSU Size: 1, 3, 7, 20 Table top deflection mm or less High Precision Peripheral table deflection mm or less CRB2 CRBU2 CRB1 MSU CRJ CRQ2 MSQ MSZ CRQ2X MSQX MRQ Series MSUB
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More informationwith interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Series MD coalescing filters New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 1 mm. Modular assembly Bowl with technopolymer
More informationTwo Hand Control Valve
Two Hand Control Valve Series n output is available through synchronized, twohanded operation (within 0.5 s)! Conforming to EN574 RoHS (Interchangeable with XT92-67 ) Example of a basic circuit diagram
More informationSeries VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4
Type of actuation 4 Piping 0 Side ported Bottom ported 4 Without sub-plate Large Size 5 Port Solenoid Valve Rubber Seal Series 50/4 70 Series VP 5 port solenoid valve 5 7 position single position double
More information25% reduction in volume * PB1013A/Air-operated type without foot
Process Pump (Diaphragm Pump) Series Compact, large capacity diaphragm pump, suitable for transferring and collecting a wide range of fluids Smaller, lighter, lmtop size Pa 5% reduction in volume * 11A/Air-operated
More informationLow Maintenance Filter
Low Maintenance Filter FN/FN Series No more element replacement! Our unique element construction with back-flushing capability The element of the filter is constructed of a series of grooved filter plates
More information5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve
5.0 MPa Pilot Operated /3 Port Solenoid Valve & Check Valve VCH Series VCH4/4: Port VCH40: 3 Port VCHC40: Check Valve Pilot Operated Port Solenoid Valve [Option] VCH40 Series Stable responsiveness Response
More informationProcess Valve. 2 Port Valve For Compressed Air and Air-hydro Circuit Control
Process Series Port For Compressed Air and Air-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Cylinder actuation by external air he balance poppet
More informationLow Maintenance Filter
Low Maintenance Filter Series FN/FN4 No more element replacement! Our unique element construction with back-flushing capability The element of the filter is constructed of a series of grooved filter plates
More informationSeries MSU. Rotary Table Vane Style. High Precision. Size: 1, 3, 7, 20 CRB2 CRBU2 CRB1 MSU CRJ CRA1 CRQ2 MSQ MRQ D mm or less.
Rotary Table Vane Style Series Size: 1, 3, 7, 20 Table top deflection mm or less High Precision Peripheral table deflection mm or less Series B Series A 11-5-1 Rotary High precision type Size: 1, 3, 7,
More informationCompact Direct Operated 2/3 Port Solenoid Valve for Water and Air
Compact Direct Operated / Port Solenoid Valve for Water and Air 0/0/0: Port, 00/00: Port 0/0/0 -port type has been remodeled to new compact and lightweight series. For details about new series, refer to
More informationF.R.L. unit modular type
F.R.L. unit modular type CKD Corporation CC-8EU-GB BSIC CONCEPT Pursuing high performance for all aspects, functionality, operability, serviceability, and safety. Compressed air filter, regulator, lubricator,
More informationL1000/L3000/L4000/L8000-W Series
Lubricator standard white Series L1/L3/L4/L8-W Series Supplies fine oil mist. Port size: 1/8 to 1 JIS symbol Specifications Descriptions L1-W L3-W L4-W L8-W Appearance Working fluid Compressed air Max.
More informationSpeed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.
Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape
More informationTransmitters: Relay Valve
Relay Valve VR5/5 Series Appropriate output sequences are affected according to the signal received from the mechanical valve. It is equivalent to the auxiliary relay of an electrical system. Specifications
More informationClean Regulator. SRH Series. Contamination controlled stainless steel regulator ARJ
Clean Regulator Series IR IRV VEX SRP ITV IC T AP1 Contamination controlled stainless steel regulator 855 Clean Regulator Series Contamination controlled stainless steel regulator Oil free Outstanding
More informationProcess Valve/Series VN The cylinder operation by external pilot air Can be operated with pressure differential zero.
For General Purpose /3 Port Valve Process Valve/Series VN The cylinder operation by external pilot air Can be operated with pressure differential zero. Wide variations Series For controlling pneumatic
More informationGuide Table. ø40, ø63, ø100
Guide Table Series MGF ø, ø, ø Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder
More informationCompact Slide. Series MXH ø6, ø10, ø16, ø20
Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations
More information5 Port Direct Operated Poppet Solenoid Valve, Rubber Seal
Port Direct Operated Poppet Solenoid Valve, Rubber Seal Series 3000 or details about certified products conforming to international standards, visit us at www.smcworld.com. C: 0.4 dm 3 /(s bar) (Passage
More informationSoft Start-up Valve. AV2000/3000/4000/5000 Series
Soft Start-up Valve V000/000/000/000 Series [Option] C- R- W- C R - W - Start-up valve for low speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off
More informationSeries AN05 to 40 RoHS
Silencer Compact Resin Type/Male Thread N0 to 40 RoHS How to Order N 0 Body size Specifications 0 0 30 40 Thread type M thread Nil R N NPT Thread connection port size pplicable model M 0 0 03 04 M x 0.8
More informationGuide Table. MGF Series
Guide Table MGF Series ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder
More informationPiping labor reduced A flexible system has been adopted. E-P HYREG. Cylinder behavior and pressurization control. Example
E-P HYREG VY Series This hybrid regulator combines a regulator and a solenoid valve. Stepless control through electric signals Port sizes M5 to inches can be covered by combining an ultra-compact electro-pneumatic
More informationFlow Switch Paddle Style Flow Switch. How to Order IF3 1 1 N Paddle style flow switch. Enclosure
Paddle Style For details about certified products conforming to international standards, visit us at www.smcworld.com. Flow switches, series IF detect and confirm liquid, generally used in fields such
More informationCompact Guide Cylinder Series MGQ
Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers
More informationHow to Order 02 1/4. Thread type Nil Rc N NPT * * Semi-standard
Filter Regulator IW Series Two types are available: adjustable set pressure type and fixed set pressure type. Low/High temperature and external parts copper-free types can be selected. Pressure gauge connecting
More information5 Port Solenoid Valve Direct Operated Poppet Type. Specifications
Port Solenoid Valve Direct Operated Poppet Type 000 Series Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W
More information3 Port Solenoid Valve Pilot Operated Poppet Type. External pilot
3 Port Solenoid Valve Pilot Operated Poppet Type Series VG342 Rubber Seal [Option] Low power consumption 4.8 W DC (Standard type) 2 W DC (Energy-saving type) No lubrication required Possible to use in
More informationProcess Inline Filter Protective filter PLF2-9HF
Process Inline Filter Protective filter PLF2-9HF Specifications Nominal size: DN 300 - DN 600 Q s max: 3000 m 3 /h p s max: 16 bar Filtration ratings: 1-90 µm 1. GENERAL Product description Protective
More informationSpecifications VH600. Ambient temperature and operating fluid temperature Operating angle Lubrication. Semi-standard
Hand Valve Series VH Specifications VH0 VH0 Fluid Proof pressure Max. operating VH00/00/00 pressure VH0 Ambient temperature and operating fluid temperature Operating angle Lubrication Air.5 MPa.0 MPa MPa
More informationExhausting equipment for pilot valve not required. Common exhaust port for main and pilot valve (VF1000/3000)
5 Port Pilot Operated Solenoid Valve Rubber Seal Series 1000/3000/5000 Large flow capacity Yet compact size. Low power consumption 1.8 W (DC) Exhausting equipment for pilot valve not required. Common exhaust
More informationCVE2/CVSE2 CVE3/CVSE3
Overview This is a reliable 2, 3 port coolant valve with cylinder drive method. This valve for tool machine cutting oil or coolant control incorporates a metal seal to prevent the entry of cutting chips,
More informationVacuum pump system type
type VS*P Vacuum component C O N T E N T S Series variation 166 20 mm width universal type (/M) 168 10.5 mm width universal type (/M) 184 31.5 mm width discrete type (VSQP) 214 11 mm pitch manifold dedicated
More informationStandard Specifications
Miniature Regulator ARJ020F Compact and lightweight (6g) Low cracking pressure 0.02MPa Standard model equipped with backflow function Standard Specifications Port size IN side OUT side (Applicable tube
More information