SOLENOID VALVES PIV.M 15 mm
|
|
|
- Annis Hardy
- 6 years ago
- Views:
Transcription
1 SOLENOID VALVES PIV.M mm / NC/NO direct control microvalves Possible assembly on single and multiple bases Monostable manual actuation as standard Assembly in any position Operation with filtered lubricated or unlubricated air Maximum ambient temperature: 0 C Low power absorption TECHNICAL DATA Voltage tolerance Alternating current frequency (AC) Maximum operation frequency Solenoid rating Response time Type of protection Electrical connection Insulation class Ambient temperature Fluid temperature Fluid Working life Materials Weight Manual control Assembly position ΔV f f t F Te Tg [g] 0-+% 0/0 Hz 0 Hz 00% ED 0 msec. IP EH 0. mm micro centre distance 0 C to 0 C 0 C to 0 C Filtered lubricated or unlubricated air 00 million cycles Body: PPS Spring: 0 stainless steel FKM/FPM gaskets 0 g monostable in any position KEY TO CODES P I V FAMILY AIR HOLE NUMBER OF WAYS M PORT 0 THREAD VERSION N C FURTHER DETAILS mm. mm. mm ways M x 0 on base VDC VAC 0 VAC 0 VAC NC normally closed NO normally open./
2 PIV.M STD DIMENSIONS ORDERING CODES - SPECIFIC TECHNICAL DATA *.. max 0. Nm X Y Z..... XYZ *.. Ordering code W W00000 W00000 W00000 W00000 W0000 W0000 W0000 W W00000 W00000 W00000 PIVM0 NC PIVM0 NC PIVM0 NC PIVM0 NC PIVM0 NC PIVM0 NC PIVM0 NC PIVM0 NC PIVM0 NO PIVM0 NO PIVM0 NO PIVM0 NO Voltage VDC VAC 0VAC 0VAC VDC VAC 0VAC 0VAC VDC VAC 0VAC 0VAC Flow rate Watt.W W - VA W - VA W - VA.W W - VA W - VA W - VA.W W - VA W - VA W - VA Hole diam. mm Factor Operating pressure bar MULTIPLE BASE FOR PIV.M ORDERING CODES - SPECIFIC TECHNICAL DATA W W W W W W W W W W Colour Single base Type B00 B00 B00 B00 B00 B00 B00 B00 B00 B END PLUG UNUSED POSITION ORDERING CODES W END PLUG..../
3 END PLUG PORT ORDERING CODES W END PLUG PORT... MICRO ELECTRIC CONNECTOR mm ORDERING CODES W00000 W00000 W00000 W00000 W00000 Colour black Transparent Transparent Transparent Transparent Type Standard LED V LED 0V LED + VDR V LED + VDR 0V ~.. Pg... NOTES./
4 PIV VALVES ON BASE PIV.I PIV.T and PIV.B solenoid valves Assembly on base Bistable manual actuation Normally closed / normally open solenoid valves / / Installation in any position Particularly suitable for high operating frequencies and low response times TECHNICAL DATA PIV.I ON BASE PIV.T ON BASE PIV.B ON BASE Absorption Voltage available Voltage tolerance Maximum operating frequency Solenoid rating Response time Type of protection Type of coil Insulation class Ambient temperature Fluid temperature Fluid Working life Weight Maximum coil/nut torque W V ΔV f ED t F Te Tg [g] W - VA -Vdc Vac 0/0 Hz 0 to +% 0 Hz 00% msec IP Coil side Ø DIN 0 0 C 0 C Filtered lubricated or unlubricated air million cycles 0 to0 g (according to the version) Nm,W -.VA Vdc Vac 0/0 Hz 0 to +% 0 Hz 00% msec IP Coil side Ø DIN 0 0 C 0 C Filtered lubricated or unlubricated air million cycles g Nm 0W - VA Vdc Vac 0/0 Hz 0 to +% Hz 00% 0 msec IP Coil side 0 DIN 0 0 C 0 C Filtered lubricated or unlubricated air 0 g Nm COMPONENTS Manual control: technopolymer Body: technopolymer Sleeve locking plate Spring: stainless steel Sleeve: brass OT Ring nut for coil fixing Gasket: NBR Mobile core Spring: stainless steel Spring: stainless steel Gasket: NBR 0./
5 PIV.I VALVES, OPERATOR Ø, ON BASE X Y Z X Y W W PIVI0S NC PIVI0S NC Air hole diameter mm.. Factor 0. Maximum operating pressure (bar) DC= AC W VA 0 0 Z ø ~ W00000 W00000 PIVI0S NC PIVI0S NC PIV.T VALVES, OPERATOR Ø, ON BASE NC NO W0000 W0000 W00000 W00000 PIVT0B NO PIVT0B NO PIVT0B NC PIVT0B NC Air hole diameter mm.... Factor Pressure range (bar) DC =,W AC,VA ø. ~ PIV.T VALVES, OPERATOR Ø, ON BASE WITH CONVEYED EXHAUST NC NO W00000 W0000 W W00000 PIVT00 NO PIVT00 NO PIVT00 NC PIVT00 NC Air hole diameter mm.... Factor Pressure range (bar) DC =,W ø ~. AC,VA /
6 PIV.T VALVES, OPERATOR Ø, ON BASE NORMALLY CLOSED W PIVYB0S NC Air hole diameter mm.. Factor. Maximum operating pressure (bar) DC AC 0W VA 0 G / ø ~ M KEY TO CODES P I V FAMILY AIR HOLE NUMBER OF WAYS T CONNECTION 0 THREAD O VERSION N C FURTHER DETAILS 0. mm. mm. mm. mm. mm Y. mm W mm X mm Z mm ways ways I T B x operator Ø x operator Ø 0x0 operator Ø 0 on base O B S on base with conveyed exhaust on base standard NC NO normally closed normally open ACCESSORIES FOR PIV VALVES ON BASE MULTIPLE BASES FOR PIV.I SOLENOID VALVES, OPERATOR Ø G/... W0000 W0000 W0000 W0000 W0000 W0000 W0000 W0000 W0000 W0000 Base positions Base positions Base positions Base positions Base positions Base positions Base positions Base positions Base positions Base 0 positions EB 00 EB 00 EB 00 EB 00 EB 00 EB 00 EB 00 EB 00 EB 00 EB /
7 MANIFOLD BASES FOR PIV.I SOLENOID VALVES, OPERATOR Ø ø. G/ ø. W00000 W0000 W0000 Manifold base LH end plate RH end plate EB 000 I EB 000 TI EB 000 T 0 0 G/ 0 G/ BLANKING PLATE FOR PIV.I PIV.T VALVES, UNUSED POSITION. W Unused position EB 000 MULTIPLE BASES FOR PIV.T SOLENOID VALVES, OPERATOR Ø G/ 0 M G/ ø... G/. W00000 W00000 W00000 W00000 W00000 W00000 W00000 W00000 W00000 W00000 ACC. BASE 0, POSN. PIV.T ACC. BASE 0, POSN. PIV.T ACC. BASE 0, POSN. PIV.T ACC. BASE 0, POSN. PIV.T ACC. BASE 0, POSN. PIV.T ACC. BASE 0, POSN. PIV.T ACC. BASE 0, POSN. PIV.T ACC. BASE 0, POSN. PIV.T ACC. BASE 0, POSN. PIV.T ACC. BASE 0, 0 POSN. PIV.T Posn NC/NO ADAPTER FOR PIV.T VALVES W00000 ACC. NC/NO ADAPTER I /
8 BASE BLANKING PLATE FOR PIV.T VALVES, UNUSED POSITIONS. W Accessories: blanking plate B000 MULTIPLE BASES FOR PIV.B VALVES G/... G/. W00000 W00000 W00000 W00000 W00000 W00000 W00000 W00000 W00000 Function position positions positions positions positions positions positions positions positions Sigla B00 B00 B00 B00 B00 B00 B00 B00 B00 0. COILS, SIDE mm FOR PIV.I SOLENOID VALVES, OPERATOR Ø ø.. ø.... Voltage tolerance: - 0 to + % Insulation class: F Degree of protection: IP EN0 with connector Avoid prolonged exposure to the atmospheric agents. Maximum coil temperature at 00% use: 0 C at 0 ambient temperature According to Atex / CE rule, group, category GD Nominal voltage Absorption Inrush Holding W Vcc W W Coil Ø BA W-VDC W Vcc W W Coil Ø BA W-VDC W V 0/0Hz.VA.VA Coil Ø BA.VA-VAC W V 0/0Hz.VA.VA Coil Ø BA.VA-0VAC W V 0/0Hz.VA.VA Coil Ø BA.VA-0VAC W Vcc W W Coil Ø W-VDC W Vcc W W Coil Ø W-VDC W V 0/0Hz VA VA Coil Ø VA-VAC W V 0/0Hz VA VA Coil Ø VA-0VAC W V 0/0Hz VA VA Coil Ø VA-0VAC COILS, SIDE mm FOR PIV.T SOLENOID VALVES, OPERATOR Ø./0 ø. ø Voltage tolerance: - 0 / + % Insulation class: F Degree of protection: IP EN0 with connector Avoid prolonged exposure to the atmospheric agents Maximum coil temperature at 00% use: 0 C at 0 ambient temperature Absorption Nominal voltage W00000 W0000 W0000 W0000 W W00000 W00000 W00000 Vcc V 0/0Hz 0V 0/0Hz 0V 0/0Hz Vcc V 0/0Hz 0V 0/0Hz 0V 0/0Hz Inrush W VA VA VA.W VA VA VA Holding W.VA.VA.VA.W.VA.VA.VA Coil Ø BA W-VDC Coil Ø BA.VA-VAC Coil Ø BA.VA-0VAC Coil Ø BA.VA-0VAC Coil Ø.W-VDC Coil Ø.VA-VAC Coil Ø.VA-0VAC Coil Ø.VA-0VAC
9 COILS, SIDE mm FOR PIV.B SOLENOID VALVES ø ø Voltage tolerance: - 0 / + % Insulation class: M0 Degree of protection: IP EN0 with connector Avoid prolonged exposure to the atmospheric agents ø 0 0. W00000 W0000 W0000 W0000 CONNECTORS, SIDE mm FOR PIV.I-PIV.T. ~ W0000 W0000 W0000 W0000 W0000 W0000 W0000 Colour black Cable diameter Type Standard LED V LED 0V LED 0V LED + VDR V LED + VDR 0V LED + VDR 0V CONNECTORS, SIDE 0 mm FOR PIV.B. ~ W0000 W0000 W0000 W0000 W0000 W0000 W0000 Colour black Cable diameter Type Standard LED V LED 0V LED 0V LED + VDR V LED + VDR 0V LED + VDR 0V ~0. ~ ~ ~. Nominal voltage Vcc V 0/0Hz 0V 0/0Hz 0V 0/0Hz Power absorption (average power input) 0W VA VA VA Coil 0 Ø 0W-VDC Coil 0 Ø VA-VAC Coil 0 Ø VA-0VAC Coil 0 Ø VA-0VAC. Pg Pg./
10 PIV VALVES IN LINE PIV.I PIV.B in-line solenoid valves Threaded ports: G/ G/ / / solenoid valves - normally closed/normally open Installation in any position Particularly suitable for high operating frequencies and low response times. TECHNICAL DATA Absorption Voltage available Voltage tolerance Maximum operating frequency Solenoid rating Response time Type of protection Type of coil Insulation class Ambient temperature Fluid temperature Fluid Working life Weight Maximum coil/nut torque Note on use W V ΔV f ED t F Te Tg [g] PIV.I IN LINEA PIV.B IN LINE.W -.VA 0W - VA Vdc Vac - 0/0 Hz Vdc Vac - 0/0 Hz 0 to +% 0 to +% 0 Hz Hz 00% 00% msec 0 msec IP IP coil side Ø DIN 0 coil side 0 DIN 0 0 C 0 C 0 C 0 C filtered lubricated or unlubricated air filtered lubricated or unlubricated air million cycles to 0 g (depending on version) 0 g Nm Nm The / NC and / NO valves work only with inlet pressure outlet pressure COMPONENTS Body: aluminium Springs: steel Sleeve Gasket: NBR Springs: steel Mobile core Gasket: FKM/FPM Coil locking ring./
11 PIV.I VALVES, OPERATOR Ø mm, IN LINE / X Y Z Z Ordesing code W W00000 W00000 W00000 W00000 W0000 PIVIS NC PIVIS NC PIVIS NC PIVIS NC PIVIS NO PIVIS NO Input thread G/ G/ G/ G/ Diameter of air hole mm factor Maximum operating pressure (bar) DC = AC W VA X Y ø. W00000 W00000 W00000 W0000 PIVIS NC PIVIS NC PIVIS NC PIVIS NO G/ G/ G/ X Y Z Z ø. X G/. Y PIV.B VALVES, OPERATOR Ø, IN LINE X øa X Y Z Y.. G / Z ø MAX. Ordering code W00000 W0000 W000 W00000 W00000 W W00000 W0000 W0000 W W00000 W00000 W00000 PIVBS NO PIVBS NO PIVBS NO PIVBS NC PIVWBS NC PIVBS NC PIVBS NC PIVBS NC PIVWBS NC PIVBS NC PIVXBS NC PIVZBS NC PIVBS NO Input thread G/ G/ G/ G/ G/ G/ G/ G/ G/ G/ G/ G/ G/ Diameter of air hole mm factor Maximum operating pressure (bar) DC = 0W... AC VA 0 0./
12 KEY TO CODES P I V FAMILY AIR HOLE NUMBER OF WAYS B CONNECTION THREAD S VERSION N C FURTHER DETAILS. mm. mm. mm W mm X mm Z mm ways ways I B x operator Ø 0x0 operator Ø G/ G/ S Standard NC normally closed NO normally open COIL, SIDE 0 mm - FOR PIV.B SOLENOID VALVES Voltage tolerance: - 0 / + % Insulation class: M0 Degree of protection: IP EN0 with connector Avoid prolonged exposure to the atmospheric agents ø ø ø 0 0. W00000 W0000 W0000 W0000 Nominal voltage Vcc V 0/0Hz 0V 0/0Hz 0V 0/0Hz Absorption (average) 0W VA VA VA Coil 0 Ø 0W-VDC Coil 0 Ø VA-VAC Coil 0 Ø VA-0VAC Coil 0 Ø VA-0VAC. COIL, SIDE mm - FOR PIV.I SOLENOID VALVES ø.. ø.... Voltage tolerance: - 0 / + % Insulation class: F Degree of protection: IP EN0 with connector Avoid prolonged exposure to the atmospheric agents Maximum temperature of coil at 00% use: 0 C at 0 ambient temperature According to Atex / CE rule, group, category GD W W W W W W W W W W Nominal voltage Vcc Vcc V 0/0Hz 0V 0/0Hz 0V 0/0Hz Vcc Vcc V 0/0Hz 0V 0/0Hz 0V 0/0Hz Inrush W W.VA.VA.VA W W VA VA VA Absorption Holding W W.VA.VA.VA W W VA VA VA Coil Ø BA W-VDC Coil Ø BA W-VDC Coil Ø BA.VA-VAC Coil Ø BA.VA-0VAC Coil Ø BA.VA-0VAC Coil Ø W-VDC Coil Ø W-VDC Coil Ø VA-VAC Coil Ø VA-0VAC Coil Ø VA-0VAC./
13 CONNECTOR, SIDE mm. ~ W0000 W0000 W0000 W0000 W0000 W0000 W0000 Colour black Ø Cable Type Standard LED V LED 0V LED 0V LED + VDR V LED + VDR 0V LED + VDR 0V CONNECTOR, SIDE 0 mm. ~ W0000 W0000 W0000 W0000 W0000 W0000 W0000 Colour black Ø Cable Type Standard LED V LED 0V LED 0V LED + VDR V LED + VDR 0V LED + VDR 0V ~0. ~ ~ ~. Pg Pg NOTES./
VALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
VALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
VENTTIILIT MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME. TECHNICAL DATA Valve fitting port Fluid Type Versions Operators: 0.
venttiilit MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Valve fitting port Fluid Type Versions Operators: Operating pressure C / Flow rate at 6 Bar P 0.5 Bar Flow rate at 6 Bar P 1 Bar N Installation
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
Solenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
VALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
B1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
Type 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
MACH 16 VALVES DISTRIBUTORS
MACH 16 VALVES Available in size 1/8 only, versions 5/2 and 5/3 and with pneumatic and solenoid actuation. The mach 16 valve is a typical small size valve, only 16 mm wide, with excellent performance 750
Solenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
SOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
EVI 5 S13 Solenoid System
EVI 5 S13 Solenoid System The EVI5 S13 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 13
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
Electrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Control Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet
2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
Complete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
Nugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
Solenoid System. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex na II 3 GD T4 or T5).
EVI 7 S9 Solenoid System The EVI7 S9 system by AMISCO includes a wide range of solenoids, coils and operators, designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter
Series MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
SUMMARY PROCESS VALVES MULTIPLE FLUIDS
SUMMARY PROCESS VALVES MULTIPLE FLUIDS P MULTIPLE-FLUID PROCESS VALVES.2 P SOLENOID VALVES, SERIES EV-FLUID.4 P SOLENOID VALVES, SERIES EV-FLUID, DIRECT ACTING.5 P SOLENOID VALVES, SERIES EV-FLUID, SERVO-ASSISTED
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
Solenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
Direct-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
NAMUR Technical details
Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
APPLICATION OF SYSTEM 8
System 8 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approimately
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
System 6. Solenoid Coils Armature Assemblies Valve Systems
Solenoid Coils Armature Assemblies Valve Systems a Kft. i r á g n u H t e n nass mag Precision Controls Kft. since 0 Nass Controls LP Nass Magnet GmbH Introduction.........................................
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv)
Valve series KN-05 acc. to NAMUR, 3/2-way G1/4 780 Nl/min (0.792 Cv) Order code Series and function 1) Plug socket see page 5.042. KN-05-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
V44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves
V/V series, x /, / & / > > x/, / and / valves, ISO 07-/ VDMA 6, Size 6 mm > > Solenoid and pilot actuated > > High performance, compact design > > Flexible sub-base system > > Multipressure system capability
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
400 SERIES MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS
MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium
NAMUR Technical details
Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered,
System 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
High Pressure Valves
High Pressure Valves Available from BetaValve.com 01494 459 511 Sales@betavalve.com Park House Business Centre, Desborough Park Road, High Wycombe Bucks HP12 3DJ Series 119 Solenoid valve 2 way normally
2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
Solenoid coil Types BB, BE, BF, BG, and BN
Data sheet Solenoid coil Types BB, BE, BF, BG, and BN The coils are specially designed to operate in the aggressive environment of high humidity and temperature fluctuations that you find in most refrigeration
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
300 SERIES DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS
DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Diecast aluminium (anodised) Body Diecast aluminium (anodised) Pilot base Brass (chromed) Pilot Diaphragm NBR Bolts and screws
Control Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet
Valves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
series UK Poppet valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 - G 1 DESCRIPTION MATERIALS TECHNICAL DATA Poppet valves series UK
DESCRIPTION Valves series UK are produced in the /, 3/ and 5/ functions. In the 3 port control version with small pilot system, sizes G 1/8 and G 1/4, support the 15 mm direct acting valve (type UMCSV
Solenoid valves VUVS/valve manifold VTUS, NPT
Solenoid valves VUVS/valve manifold VTUS, NPT -V- New VUVS-LT25, VTUS-25 Solenoid valves VUVS/valve manifold VTUS, NPT Key features Innovative Versatile Reliable Easy to install A reliable, heavy-duty
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
200 SERIES THREADED VALVES PENTAIR CLEAN AIR SYSTEMS
THREADED VALVES PENTAIR CLEAN AIR SYSTEMS Lock nut DESCRIPTION The is a range of diaphragm valves suitable for dust collector applications, in particular for reverse pulse-jet filter cleaning of filter
5 Port Solenoid Valve Direct Operated Poppet Type. Specifications
Port Solenoid Valve Direct Operated Poppet Type Series 000 Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W
Technical Data Sheet
Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary
Cable Plug acc. to DIN EN , Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
3/2-5/2 ports / positions
Series SOLENOID SPOOL VALVES G / THREADED PORTS with CNOMO pilots /-/ ports / positions SPECIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PORTS : G/ PRESSURE : to 0 bar TEMPERATURE RANGE
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
Technical data. Standards: IEC/EN chromated and painted Protection class: IP 67 to EN 60529
B 20 16 21,5 M 16x1,5 60 5 1 52 Aluminium enlosure Long life on-contacting principle 1 Reed contact Particularly resistant to vibration Available for actuation from front or side Actuating distance up
N/** поставка оборудования для подготовки воздуха
M/0000 Series Inline /, 5/ and 5/ Spool Valves Solenoid and Pilot Actuated G / Low power solenoids High flow Unique steel reinforced seals Light weight corrosion resistant materials Technical Data Medium:
5 Port Solenoid Valve Direct Operated Poppet Type. Specifications
Port Solenoid Valve Direct Operated Poppet Type 000 Series Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W
FL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
zamak nitrile rubber self-extinguishing technopolymes aluminum
0 mm - G /8 Valves and solenoid valves - G/8 threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
Valve Islands Series F
CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed
System 6. ü ( System 6
System 6 ü www.nassmagnet.com ( +9 511 676-0 System 6 The name System 6 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
600/700 SERIES FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS
FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium (anodised)
Series 581 ISO Pneumatic Directional Control Valves
Series 581 ISO 5599-1 Pneumatic Directional Control Valves Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series 581 - A complete series of standardized
Type EV224B. Servo-operated 2/2-way solenoid valves for high pressure air. Data sheet
Data sheet Servo-operated 2/2-way solenoid valves for high air Type EV224B EV224B for compressed air, is a high indirect servo-operated 2/2-way solenoid valve with working up to 40 bar, medium temperature
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
DIRECT OPERATED SOLENOID PILOT VALVES Product Index
DIRECT OPERATED SOLENOID PILOT VALVES Product Index ports/positions Function pipe connections * - instant fittings O.D. (mm) w - internal thread (ØG) x - external thread (ØG) n - pad mount : - pad mount,
Servo-operated 2/2-way solenoid valves for high pressure
Data sheet Servo-operated 2/2-way solenoid valves for high Type EV224B EV224B for compressed air, is a high indirect servo-operated 2/2-way solenoid valve with working up to 40 bar, medium temperature
Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2
Series EK Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/ DESCRIPTION Valves series "EK" are produced in the 3/, and pneumatic functions. Thanks to a suitable bracket, the piloting solenoid
Pneumatic. PVD Everdure Ceramic Valves
PVD Ceramic Valves Ceramic slide plate; extremely long life Built in manual override Transfer modules to combine all sizes Selectable air pilot control Clip-on DIN rail Specification Material Polyamide
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port