Control Valve Specifications

Transcription

1

2 Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet style whereas the N3A / V and NA / V operate using a balanced spool design. Both the poppet and spool valves are body ported but are able to be mounted to an inline manifold system with up to twelve station positions. The aluminum body construction is offered as standard with a black, hard anodized finish ensuring long life particularly in harsh environments such as wash down or outdoor applications. Materials: Maximum Pressure: Response: Manual Override: Electrical Connection: Temperature Range: Seals: Hard Anodized Aluminum, Stainless Steel, Thermoplastic 29.9 Hg vacuum to 1psi(g) for direct acting and -125psi(g) for spool design models <ms 100 series: non-locking (push button); 0,0 & 0 locking override (push button and twist ) DIN with LED or Lead Wire 32ºF to 1ºF (0-65ºC) Standard Nitrile (NBR), Viton or Silicone as an option. Please contact us for more information. Page

3 Control Valve Specifications N V 2 C - 08 VDC Threads N NPT BSPP(G) Valve Type 3A 3A (3 port pilot op.) 3V 3V (3 port sol.op.) A A (5 port pilot op.) V V (5 port sol. op.) Body Size 1 mm 2 mm 3 mm 32mm Actuator Type 10 Single Double Double (3 position) Centre Condition (3 position valves) C Closed E Exhaust P Pressurized Port Size M UNF 06 1/8NPT 08 1/NPT 10 3/8NPT 15 1/2NPT Coil Voltage 12VDC VDC 110VAC 1 SPARE DIN COILS Body Size 12VDC VDC 110VAC 1 110DIN12VDC 110DINVDC 110DIN110VAC 2 210DIN12VDC 210DINVDC 210DIN110VAC 3 210DIN12VDC 210DINVDC 210DIN110VAC 210DIN12VDC 210DINVDC 210DIN110VAC 1 SPARE LEAD WIRE COILS (mm / leads) Body Size 12VDC VDC 110VAC 1 110W12VDC 110WVDC 110W110VAC 2 210W12VDC 210WVDC 210W110VAC 3 210W12VDC 210WVDC 210W110VAC 210W12VDC 210WVDC 210W110VAC STANDARD MODELS all solenoid valves are stocked with VDC DIN coils Order spare coils for alternative voltages (Table 1) Body Size 1 Body Size 2 Body Size 3 Body Size N3A N3A N3A N3A10-15 N3A1-06 N3A0-08 N3A3-10 N3A-15 N3V VDC N3V VDC N3V VDC N3V10-15-VDC N3V1-06-VDC N3V0-08-VDC N3V3-10-VDC N3V-15-VDC NA1-06 NA NA NA10-15 NA1C-06 NA0-08 NA3-10 NA-15 NA1E-06 NA2C-08 NA3C-10 NAC-15 NA1P-06 NA2E-08 NA3E-10 NAE-15 NA NA2P-08 NA3P-10 NAP-15 NV VDC NV VDC NV VDC NV10-15-VDC NV1-06-VDC NV0-08-VDC NV3-10-VDC NV-15-VDC NV1C-06-VDC NV2C-08-VDC NV3C-10-VDC NVC-15-VDC NV1E-06-VDC NV2E-08-VDC NV3E-10-VDC NVE-15-VDC NV1P-06-VDC NV2P-08-VDC NV3P-10-VDC NVP-15-VDC *The valve models listed above are supplied with standard ports as shown in Table 2. Other port sizes are available. Please refer to Table 3 below. 2 Valve Body Port Sizes Flow Performance Spool Valves Port Sizes Supply Outlet Exhaust M UNF 10-32UNF 10-32UNF 06 1/8NPT 1/8NPT 1/8NPT 08 1/NPT 1/NPT 1/8NPT 10 3/8NPT 3/8NPT 1/NPT 15 1/2NPT 1/2NPT 1/2NPT 3 OPTIONAL PORT SIZES Body Size Optional Port Size (all ports) Part Number Indication UNF -M5 2 1/8NPT /NPT -08 only 1/2NPT only 1/2NPT For example NV VDC is a Size 3 body but with 1/NPT threads for inlet, supply and exhaust ports, (P, A,B,R & S) Supply Ports psig # SCFM SCFM 1/8 NPT 0.6 SCFM 31 SCFM 1/ NPT SCFM 9 SCFM 3/8 NPT SCFM 93 SCFM 1/2 NPT SCFM 11 SCFM Spool Valve Specifications Working Medium micron filtered air Operating Temperature -5ºC - 60ºC Lubrication Not Necessary Working Pressure bar(g) Supply Pressure <12bar(g) Coil Power AC2.5VA DC2.5W Insulation Class IP65 Material Aluminum Cycle Rate 5 cycle/sec Insulation Class F Voltage Tolerance +/- 10% Reaction Time 0.05sec indicates standard in stock product Page 8

4 Poppet Valves N2V & N3V1 The N2V Series of direct acting poppet valves are available in both a 2-way and 3-way configuration. The exhaust port of the N2V0 valves is a 10-32UNF (M5) thread in the top of the solenoid stem. The N3V1 valves series is a 1/8NPT ported valve but is able to be joined directly to a corresponding unit which shares a common supply port at either end of the valve assembly block. Unlike other types of valves, this series of valve does not require a separate manifold block. These valves are supplied as standard with a VDC coil. For other voltages please order coils separately as shown in Table 1 below. For larger quantities the valve can be supplied with the preferred coil. Please enquire. Valve Model N2V VDC Valve Type N2V VDC N2V0-06-VDC 2-Way Direct Acting Port Sizes 1/8NPT Cv Orifice Size Working Pressure Working Medium Ambient Temperature Working Temperature Cycle rate Coil Insulation & Protection Class Coil Duty Cycle Power Consumption Voltage Range Reaction Time Electrical Connection Body Material 1/NPT 1/8NPT (10-32UNF exhaust) 0.23 Ø2.5mm N2V0-08-VDC 3-Way Direct Acting 1/NPT (10-32UNF exhaust) 0.05 Ø1.0mm NC 2-way NC 3-way N3V1-06-VDC 1/8NPT (10-32UNF exhaust) " Hg to 115psi(g) air, inert gas & liquid -5ºC - +80ºC / 23ºF - 16ºF 5ºC - +60ºC / 1ºF - 1ºF (no freezing medium) 10 cycles/sec F Class, IP65 (CE Certification) 100% ED AC: VA DC: W +/- 10% 0.05 sec D = Form B DIN (LED indicator) or W = Flying Lead Coil ( Lead Wire) Hard Anodized Aluminum N2V Series AC VA DC.8W N3V1-06 Series DIN Connector can be rotated 0º DIN Connector can be rotated 0º Spare Coils 1 Shown is a 3 station assembly 12VDC VDC 110VAC DIN Connector 210DIN12VDC 210DINVDC 210DIN110VAC Lead Wire 210W12VDC 210WVDC 210W110VAC indicates standard in stock product Page 9

5 Solenoid Valves N3V Series Type A B C D M1 M2 M3 ØM ØM5 ØM6 P1 N3V110 N3V210 N3V310 N3V10 Single Solenoid / Spring Return N3V110 N3V210 N3V310 N3V1 N3V0 N3V3 N3V Double Solenoid N3V10 N3V1 Page 10 N3V0 For complete model options including part numbers for ordering, please refer to the control valves specification page(s). e.g N3V VDC N3V3 N3V

6 Solenoid Valves NV Series Type A B C D M1 M2 M3 ØM ØM5 P1 P2 NV110 NV210 NV310 NV10 Single Solenoid / Spring Return NV NV0 NV3 Double Solenoid NV NV1 NV2 NV3 NV Double Solenoid 3 Position For complete model options including part numbers for ordering, please refer to the control valves specification page(s). e.g NV VDC NV110 NV210 NV310 NV1/ NV10 Page 11 NV0/ NV3/ NV/

7 Pilot Valves N3A Series Type Pilot Port A B C M1 M2 M3 M ØM5 ØM6 P1 N3A110 N3A210 N3A310 N3A10 N3A1 N3A0 N3A3 N3A Single Pilot / Spring Return Double Pilot 1/8NPT N3A110 N3A210 N3A310 N3A10 N3A1 N3A0 N3A3 N3A Page 12 For complete model options including part numbers for ordering, please refer to the control valves specification page(s). e.g N3A110-06

8 Solenoid Valves NA Series NA110 NA210 NA310 NA10 NA1 NA0 NA3 NA NA1 NA2 NA3 NA Type Single Pilot / Spring Return Double Pilot Double Pilot 3 Position Pilot Port 1/8NPT A B C M M M3 ØM ØM5 P1 P For complete model options including part numbers for ordering, please refer to the control valves specification page(s). e.g NV NA110 NA1/ NA210 NA0/ NA310 NA3/ NA10 NA/ Page

9 Spool Valve Manifolds These manifold blocks enable the connection of a common pressure supply (P) and exhaust ports (R &S) to multiple valves stations. These manifolds are suitable for the spool valves NV and NA. Manifolds for the N3V and N3A are also available. Please enquire. Manufactured in aluminum with an anodized finish. Manifold Kit Contents Manifold Sealing Gaskets Connecting Bolts BLANKING PLATES (to seal an empty valve station) Kit Part Number* Manifold Series NV1BGS NV110F NV2BGS NV210F NV3BGS NV310F N V NPT V 110F - 110F 100 Series 210F 100 Series 310F 0 Series 10F 0 Series NVBGS NV10F *Kit comprises of one blanking plate, gasket and 2 screws e.g NV210F-8 8 station manifold suitable for 0 series valve. 110F 210F 310F 10F A B C E F G H K L* N * N * N * + 26 N * + M Q 1/NPT 1/NPT 3/8NPT 1/2NPT R X Y Dimension L explained N equals number of valve positions. For a 6 station manifold for the 110F series the calculation would be (6-1) x = 3 indicates standard in stock product Page station station 6 6 station 8 8 station station station station

10 2-way Process Valves The N2W and N2S series of process valves have been designed for general industrial use. These valves are manufactured with a coupled diaphragm and therefore can be used without a media pressure differential. Because of this feature they can also be used for vacuum duty or very low air pressure applications. Supplied with a DIN Form A coil, these simple and robust valves offer the user unparalleled performance and reliability. Port sizes from 3/8NPT to 2NPT. 2-way (2-port 2-position) Viton seals available, please enquire. N2W models are brass N2S are stainless steel. Normally closed operation (power to start media flow) Body Size A B C D Part Number Brass Body N2W0-10 N2W0-15 N2W0- N2W2-25 N2W3- N2W0- N2W0- Part Number Stainless Steel N2S0-10 N2S0-15 N2S0- N2S2-25 N2S3- N2S0- N2S0- Orifice mm mm mm 25mm mm mm mm Valve Type Method Operating Pressure Operating Temperature 2 Way Normally Closed Coupled Diaphragm Vacuum & 1psi(g) (110AC Coil), 0 to 1psi(g) (DC coil) 1 to 16 F (-10 TO 80 C) Port Size (NPT) 3/8" 1/2" 3/" 1" 1 1/" 1 1/2" 2" Body Materials Seal Materials: Insulation Class Coil Duty 2W Series Brass 2S Series: Stainless Steel NBR (Viton is optional) IP65 100% ED Coil Power W W Electrical Connections Service DIN Form A (mm Square) Air, Liquid, Vacuum Voltage Requirements Valves are available in VDC or 110VAC. Please add the voltage at the end of the part number. e.g. N2W0-10-VDC or N2W VAC. Other voltages available, please contact us indicates standard in stock product Page 15