Solenoid System. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex na II 3 GD T4 or T5).
|
|
- Matilda Riley
- 5 years ago
- Views:
Transcription
1
2 EVI 7 S9 Solenoid System The EVI7 S9 system by AMISCO includes a wide range of solenoids, coils and operators, designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 9 and the plunger with a diameter of 8. The system is designed for use with air. KNURLED NUT TOP CORE GUIDE TUBE PLUNGER MOUNTING PLATE Please contact Amisco for use with other media. All given information are subjected to changes without notice. THREAD VERSION FLANGE MOUNTING VERSION COIL The coil is available in different sizes and with different electrical terminations. Types, power and other characteristics are described in the following pages. All coils feature: heat resistant bobbin moulded with 30% glass filled thermoplastic polyester material class H wire 200 C according to IEC built-in magnetic yoke made by low carbon iron encapsulation with high quality specially designed glass filled nylon (thermoset material on demand for 22 coil). The use of other materials is possible upon special agreements. All coils are rated to class F and to IP 65 (with connector). The coil is designed and constructed in accordance to EN and VDE 0580 and it is suitable for industrial ambient conditions. For use in special ambients with high humidity, we suggest the sealed or thermoset version; at any case, please, take contact with Amisco. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex na II 3 GD T4 or T5). OPERATOR Plunger and core are made by a magnetic stainless steel specially designed for solenoid applications. The guide tube is made with brass (stainless steel is possible upon special agreement). The plunger is normally equipped with rubber seals. Other sealing materials like are available upon demand. The armature assembly is designed for more than 10 6 cycles. COMPLETE SOLENOID OPERATOR The coil is fastened to the plungerguide tube by means of a knurled nut for ease of change over without interrupting the pneumatic circuit. The operator can be fixed to the valve body either by a M12x0.5 thread (thread version), or by a mounting plate with screws (flange version). Amisco doesn't supply the plate. The suggested interface dimensions of the valve body are shown on the right side. Any change to the prescribed dimensions can effect the performances of the solenoid. 1
3 SOLENOID SYSTEM for 2/2 and 3/2 way Normally Closed and Normally Open valves Coil EVI 7/9 Electrical terminations Code Characteristics DC AC (50 Hz) AC (60 Hz) Terminals AMP 6.3x0.8 width 11 Terminals AMP 6.3x0.8 width 11 Sealed version Terminals AMP 6.3x0.8 width 11 Sealed version Thermoset Flying leads 0709S 0709F 0709E 0709C Rated power DC W Inrush power AC VA Rated power AC VA Coil temperature rise C Copper temperature rise C , , , ,5 8, ,5 4, , Coil EVI 30/9 Electrical termination Code Characteristics DC AC (50 Hz) AC (60 Hz) Rated power DC W 2 4,5 Terminals DIN A Flying leads 3009D 3009C Inrush power AC VA Rated power AC VA Coil temperature rise C , ,5 2,5 15 7,5 4,2 30 Copper temperature rise C Operator S9 Code Characteristics 3/2 way NC flange 3/2 way NC Thread 09L... Exhaust orifice Ø 1,4 2/2 way NC flange 09L... 1,4 2/2 way NC Thread 3/2 way NO flange (Top inlet) 09L... 3/2 way NO Thread (Top inlet) /2 way NO Thread (Bottom inlet) Note: Voltage tolerance: ± 10% Temperature range: 20 C +50 C Duty cycle: 100% Standard voltages: Other voltages on request VAC VDC For different orifice sizes and pressures contact AMISCO S.p.A. 2
4 EVI 7/9 AMP 6,3x0,8 CODE 0709S... (M3 Max Torque 0.6Nm) EVI 7/9 AMP 6,3x0,8 Sealed and Thermoset Version CODE 07 CODE 0709E... (M3 Max Torque 0.6Nm) EVI 7/9 Flying Leads CODE 0709C... 3
5 EVI 30/9 DIN A CODE 3009D... (M3 Max Torque 0.6Nm) EVI 30/9 Flying Leads CODE 3009C M Ex m CODE 3009M... 4
6 3009 Ex m 94/9/EC ATEX AMISCO has completed the EVI7 S9 Solenoid System with a special coil for pneumatic applications in potentially explosive ambient (group II), that fullfills the requirements of EN , EN , EN , EN , for protection mode m. The type 3009M Ex m coil is supplied with different lenght of cable up to 10 m. The coil is certified by CESI in thermal class T5 (with coil surface temperature max 100 C) or T4 (with coil surface temperature max 135 C). Ec-Type Examination Certificate number: CESI 02 ATEX 142 X and extension N 02/07. Notification number: CESI 03 ATEX 075 Q. The product is developed to be used in ambients with temperature range from 15 C to +50 C, and it has a power consumption of 3.8W for type T4 and 3W for type T5. The coil fits all Amisco standard operators 3/2 or 2/2 way NC or NO, threaded or flange types. All main voltages are available. For other technical specifications see below and next pages. The protection is assured by a thermal fuse that, in case of demage, disconnects the coil from power II 2 G D Ex mb mbd T5 or T4 T95 or T130 IP66 Specific marking of explosion protection Group II - Electrical apparatus for places with a potentially explosive atmosphere, other than mines susceptible to fire damp. Category 2 - see the board below. Explosive gas atmospheres. Explosive atmospheres in the presence of combustible dusts. The symbol Ex which indicates that the electrical apparatus corresponds to one of the protection type (EN ). Type of protection for gas encapsulation m, level mb. Type of protection for dust (D) encapsulation m, level mbd. Temperature class for gas. Maximum surface temperature for dust. The degrees of protection provided by an enclosure against, ingress of solid foreign objects, dust (first number) and water (second number). Zone Category Description G 2D Equipment in this category is intended for use in areas where explosive atmospheres caused by air/gas mixture are likely to occur. Equipment in this category is intended for use in areas where explosive atmospheres caused by air/dust mixture are likely to occur. 5
7 SOLENOID SYSTEM Ex m for 2/2 and 3/2 way Normally Closed and Normally Open valves Coil 3009 M Code Characteristics DC AC (50 Hz) AC (60 Hz) Rated power DC W 3 Ex mb T5 Ex mbd T M W. Inrush power AC VA Rated power AC VA Coil temperature rise C 35 4,8 3, ,7 10 Copper temperature rise C Rated power DC W 3,8 Ex mb T4 Ex mbd T M W. Inrush power AC VA Rated power AC VA Coil temperature rise C 50 Copper temperature rise C 55 Operator S9 3/2 way NC flange 3/2 way NC thread 09L... Exhaust orifice Ø 14,5 2/2 way NC flange 09L... 2/2 way NC thread 3/2 way NO flange (Top Inlet) 09L... 3/2 way NO thread (Top Inlet) 0-7 Note: Voltage tolerance: ± 10% Temperature range: 15 C +50 C Duty cycle: 100% Standard voltages: 12 to 240 VAC - 50/60 Hz 6 to 48 VDC For different orifice sizes and pressures contact AMISCO S.p.A. Performances W Coil - DC P ,2 VA Coil - AC 3,8 W Coil - DC P Orifice 0 0, ,5 Orifice 0 0, ,5 Above-mentioned characteristics have to be intended only as indicative. They may change according to the tube design solutions. 6
8 COIL CODING SPECIFICATIONS CODE: X X 9 9 Y K * * TYPE 07 = EVI 7 30 = EVI 30 COIL BORING 09 = 9 ELECTRICAL CONNECTION for EVI 7 S = AMP 6.3x0.8 E = AMP 6.3x0.8 Epoxy Sealed Version F = AMP 6.3x0.8 Sealed Version C = Flying Leads for EVI 30 D = DIN A C = Flying Leads SUPPLY CURRENT A = Alternating current (A.C.) D = Direct current (D.C.) R = Rectified alternating current (R.A.C.) NOMINAL VOLTAGE Example: 024 = 24V 220 = 220 V EVI 7 S9 WINDING CODE Nominal Voltage Power Winding Code 12VDC 3W 03 4,2W 06 6,5W 04 24VDC 3W 03 4,2W 06 6,5W 04 24VAC 5VA 01 8,5VA VAC 5VA 01 8,5VA VAC 5VA 03 8,5VA 01 Alternative possibilities for CUSTOMER LOGO EVI 30 S9 WINDING CODE Nominal Voltage Power Winding Code 12VDC 2W 01 4,5W 05 24VDC 2W 01 4,5W 06 24VAC 3VA 08 5VA VAC 3VA 07 5VA VAC 3VA 04 5VA 01 MARKING ZN = Standard - no logo AM = Standard + Amisco logo... = Customized marking 7
9 COIL 3009M Ex m CODING SPECIFICATIONS CODE: X X 9 9 Y K * * TYPE 30 = EVI 30 COIL BORING 09 = 9 TYPE OF PROTECTION M = Encapsulation SUPPLY CURRENT A = Alternating current (A.C.) D = Direct current (D.C.) NOMINAL VOLTAGE Example: 024 = 24V 220 = 220 V TEMPERATURE CLASS W2 = T5 class for AC W3 = T5 class for DC W4 = T4 class for DC WIRE LENGHT 01 = m 03 = 3 m 05 = 5 m 10 = 10 m 8
10 EXAMPLES OF MAIN APPLICATIONS 3/2 NC 3/2 NC & 3/2 NO (Top Inlet) Operator 2/2 NC 2/2 NC Operator 3/2 NO (Top Inlet) 3/2 NO (Bottom Inlet) 3/2 NO (Bottom Inlet) Operator 9
11 COIL CODING SPECIFICATIONS Type Function Seals Operator Code 09L02401A3CNN 09L02401A3CVN 3/2 NC 1,4 09L07170A3CNN 09L07171A3CVN FLANGE 09L02402A3CNN 09L02402A3CVN 09L02600A2CNN 09L02600A2CVN 2/2 NC 1,4 09L02600A2CNN 09L02600A2CVN 09L02600A2CNN 09L02600A2CVN 3/2 NO (Top Inlet) 09L02403A3ONN 09L02403A3OVN 09F07350A3CNN 09F07350A3CVN 3/2 NC 1,4 09F07210A3CNN 09F07212A3CVN 09F07360A3CNN 09F07360A3CVN THREAD 09F07370A2CNN 09F07370A2CVN 2/2 NC 1,4 09F07370A2CNN 09F07370A2CVN 09F07370A2CNN 09F07370A2CVN 3/2 NO (Top Inlet) 09F07401A3ONN 09F07403A3OVN 3/2 NO (Bottom Inlet) 09F11100A3ONN 09F11101A3OVN FASTENING NUTS (Note: tightening torque max 0.6 Nm) Plastic knurled nut Cod Plastic knurled nut for protected exhaust Cod Aluminium knurled nut Weavy washer Ø 8 DIN 137 type A Cod Cod
12 AMISCO S.p.A. Via Piaggio, Paderno Dugnano (Mi) Italy Tel Fax Rev. 1/2011
Solenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
More informationEVI 5 S13 Solenoid System
EVI 5 S13 Solenoid System The EVI5 S13 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 13
More informationSolenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
More informationValve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
More information15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
More informationSolenoid coils VACF Type codes
Solenoid coils VACF Type codes VACF B B2 1A Type VACF Solenoid coil, F series Solenoid coil type A B Width 30 mm, for 8 mm armature tube Width 22 mm, for 8 mm armature tube A1 Connection pattern type A,
More informationExplosion-proof Solenoids ATEX. II 2 G / II 2 D EEx dm IIC T4, T5, T6. Catalogue 8735/GB. Maximum photo
Explosion-proof Solenoids II 2 G / II 2 D EEx dm IIC T4, T5, T6 Catalogue Maximum photo ATEX Explosionproof solenoids with flameproof enclosure/encapsulation "dm" According to ATEX directive 94/9/EC and
More informationBody: Seat disc: Anod. aluminium body NBR. Connection / Orifice Flow factors Temperature values ( C)
Parker Lucifer Data Sheet 22062004 General information Lucifer ref.: 341N31 Global ref.: 7341NAKBJNM0 Housing ref.: 2995 Coil ref.: 481865 Protection class: Assembly wt. (g): 510 Body: Seat disc: Anod.
More informationAPPLICATION OF SYSTEM 8
System 8 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approimately
More informationSolenoid Operator 0516 / 1216
nass magnet GmbH Edition no. 2 Eckenerstraße 4-6 2007-01-10 D-30179 Hannover Rev.2 070110 Solenoid Operator 0516 / 1216 Operating Instructions NN 8220 126 and EC Declaration of Conformity Dear Customer!
More informationSolenoid Operator 0513 / 1213
nass magnet GmbH Run Nr. 5 Eckenerstraße 4-6 24.10.2006 D-30179 Hannover Rev. 5 061024 Solenoid Operator 0513 / 1213 Operating Instructions NN 8220 112 and EC Declaration of Conformity Dear Customer! In
More informationK Series 3 Way Direct Acting Balanced Poppet Solenoid Valve
Ex d Ex m IP5 Series 3 Way Direct Acting Balanced Poppet Solenoid Valve DB2S-M2C \ Ex d IIC with Integral Stainless \ Steel Junction Box. \ Valve. \ Manual Override, Option M2. J77072S-M2 \ Ex m II NASS
More informationSystem 6. ü ( System 6
System 6 ü www.nassmagnet.com ( +9 511 676-0 System 6 The name System 6 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More informationSPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot
SPOOL VALVES operated / to / tapped body and NAMUR for integrated pilot ATEX /-/ Series - FEATURES The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter
More informationSystem 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
More informationSystem 13. ü ( System 13
System ü www.nassmagnet.com ( +9 676-0 System The name System stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all
More informationSystem 6. Solenoid Coils Armature Assemblies Valve Systems
Solenoid Coils Armature Assemblies Valve Systems a Kft. i r á g n u H t e n nass mag Precision Controls Kft. since 0 Nass Controls LP Nass Magnet GmbH Introduction.........................................
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationEx m Solenoid Operator Type 0519
nass magnet GmbH Eckenerstrasse 4-6 D-30179 Hannover Doc. No. 113-720-0002 Revision No. 2 01.06.2015 Ex m Solenoid Operator Type 0519 Operating Instructions Dear Customer! To ensure the function and for
More informationMFH MOFH JMFH JMFDH NVF3 MUFH VOFD VOFC VSNC VUVS
Solenoid coils Solenoid coils Product range overview Version Type For valve series Page/ Internet MFH MOFH JMFH JMFDH NVF3 MUFH VOFD VOFC VSNC VUVS F solenoid coil MSF VACF 3 N solenoid coil VACN-N 6 N
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationSOGEAC SOLENOID VALVE NASS MAGNET: SYSTEM 8. s.r.l.
With pleasure we introduce on the Italian market SYSTEM 8, produced NASS MAGNET of solenoid valve that thanks to their modularity give the possibility of a wide range of easy solutions. The solenoid valve
More informationFlow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en
/ poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar For
More informationMINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
More informationYFC. Limit switch. Ex d. 24 operating head types
Ex d YFC Limit switch 24 operating head types - Group IIC - Zone 1, 2, 21, 22 - Aluminium alloy - Easy installation, wiring and maintenance - Durable and safe over time Fastening system Earth screw RAL735
More informationSolenoid coil for control in potentially explosive areas Type BZ
Data sheet Solenoid coil for control in potentially explosive areas Type BZ BZ is a solenoid coil with ATEX / IECEx approval, applicable for zone 1 and 2 Ex environments. The coils are designed to be used
More informationDirect-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
More informationHigh Flow Valve Actuation Range. NAMUR Valves G1/4" & G1/2" Piped Valves G1/4" & G1/2" Banjo Valves G1/8" & G1/4"
31-37 High flow NAMUR valves G1/ and G1/ aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding High Flow Valve Actuation
More information97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT
97 Inline /, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with
More informationFor mounting on subbase or footprint in accordance with CNOMO recommendation E 06620N Part numbers (and voltages) Voltage max. power consumption U nom
Intrinsically Safe Miniature Solenoid Valves Order/Technical Support Tel: (800) 6775 / FAX: (800) 677865 / www.crouzetusa.com 5/6 5 For mounting on subbase or footprint in accordance with CNOMO recommendation
More informationIntrinsically Safe Miniature Solenoid Valves
Intrinsically Safe Miniature Solenoid Valves 5 Order/Technical Support Tel: (800) 6775 / FAX: (800) 677865 / www.crouzetusa.com 5/6 Intrinsically safe miniature solenoid valves EEx ia T6 approval no. 9
More informationEEX Line Spring-applied single-disc brake for potentially explosion hazardous areas
EEX Line Spring-applied single-disc brake for potentially explosion hazardous areas EEX Line Standard EEX Line (+50 C) / EEX Line (+60 C) EEX Line / IEC Ex EEX Line / U.S. (NEC 500/505) CSA EEX Line Industrial
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More informationp max (see table of performances) Q max (see table of performances) bar Maximum flow l/min see par
41 510/112 ED EXPLOSION-PROOF VERSION SOLENOID OPERATED DIRECTIONAL CONTROL VALVES in compliance with ATEX 94/9/EC MD1K ISO 4401-03 (CETOP 03) E4P4K CETOP P05 E07P4K ISO 4401-07 (CETOP 07) E5P4K ISO 4401-08
More informationSOLENOID VALVES FOR REFRIGERATING SYSTEMS
SOLENOID VALVES 17 SOLENOID VALVES FOR REFRIGERATING SYSTEMS APPLICATIONS The solenoid valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive
More informationL(+) SV1 N(-) NC. Terminal Block Connections L (+) N (-) SV1 K2 K1. Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
Type Z & Ex pz purge and pressurization system Features 100% automatic purge and pressurization system including purging, temperature and leakage control, alarming and system power Third party approvals
More informationATEX/IECEx Coil Manual Type 200 and 300 Series Coils for EH70 Series Solenoid Valves Issue , Released December 13, 2017
ATEX/IECEx Coil Manual Type 200 and 300 Series Coils for EH70 Series Solenoid Valves Issue 2017.1, Released December 13, 2017 Clark Cooper A Division of Magnatrol Valve Corp. 941 Hamilton avenue Roebling,
More informationDIRECT OPERATED SOLENOID PILOT VALVES Product Index
DIRECT OPERATED SOLENOID PILOT VALVES Product Index ports/positions Function pipe connections * - instant fittings O.D. (mm) w - internal thread (ØG) x - external thread (ØG) n - pad mount : - pad mount,
More informationElectro-pneumatic control valves
Electropneumatic control valves Visit our website for further information www.crouzet.com 9 Electropneumatic miniature solenoid Miniature solenoid valves Terminals Wires Connector LED indicators Valve
More informationPOWER PULSE VALVES integral pilot (external exhaust) threaded or Quick Mount connection 3/4 to 1 1/2
POWER PULSE VALVES integral pilot (external exhaust) threaded or Quick Mount connection 3/4 to 1 1/2 NC 2/2 Series 353 X003GB2009/R8 EATURES The piston cartridge pulse valves are especially designed for
More informationData sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472
Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on
More information300 SERIES DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS
DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Diecast aluminium (anodised) Body Diecast aluminium (anodised) Pilot base Brass (chromed) Pilot Diaphragm NBR Bolts and screws
More informationProportional pressure reducing valves type DHRZO and DHRZA standard and ex-proof version, direct operated, ISO 4401 size 06
www.atos.com Table TF040-2/E Proportional pressure reducing valves type DHRZO and DHRZA standard and ex-proof version, direct operated, ISO 4401 size 06 A B DHRZO-A-012/25 A B DHRZA-A-010/25 DHRZ* are
More information200 SERIES THREADED VALVES PENTAIR CLEAN AIR SYSTEMS
THREADED VALVES PENTAIR CLEAN AIR SYSTEMS Lock nut DESCRIPTION The is a range of diaphragm valves suitable for dust collector applications, in particular for reverse pulse-jet filter cleaning of filter
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
More informationControl Stations & Switches: Control Stations Increased Safety Unicode 2 Series: Pre-drilled Control Stations
Unicode 2 Series: Pre-drilled Control Stations Polamide U43W211 Polyester U23W211 Compliance Data: ATEX IEC and IECEx (Polyester): Stainless Steel U62W229 Aluminum U83W211 ATEX IEC / IECEx CE Ex de IIC
More informationMECAIR 300 SERIES DRESSER NUT VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
300 SERIES DRESSER NUT VALVES CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES VALVE FLUIDS PRESSURE RANGE Filtered air and oil free Standard Nitrile: 20 C/+80 C Optional Viton: 30 C/+200
More information97100 NAMUR. Technical data
9700 NAMUR /2-, /2- and / Directional control valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /4, /4 NPT NAMUR Interface For single and double operated actuators
More information97105 Inline. Ordering information. Technical data. Accessories See page 5
75 Inline /-, 5/- and 5/ directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves G /, / NPT, G /, / NPT For single and double operated actuators Crossover-free switching,
More information-V- New. Valve series VOFC. 2009/08 Subject to change Internet:
Valve series VOFC 2009/08 Subject to change Internet: www.festo.com/catalogue/... 159 Solenoid valves VOFC Key features General information The valves in the VOFC series are special 3/2-way and 5/2-way
More informationMECAIR 200 SERIES THREADED VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
200 SERIES CLEAN AIR SOLUTIONS - 200 SERIES CONSTRUCTION FEATURES VALVE Lock nut DESCRIPTION COVER Diecast aluminium (anodised) BODY Diecast aluminium (anodised) PILOT BASE Aluminium (anodised) PILOT Stainless
More informationProportional Solenoid for Hydraulics ATEX + IECEX
Proportional Solenoid for Hydraulics ATEX + IECEX 4 Product group Function Armature space pressure tight, rated pressure 50 bar Magnetic force vs. stroke characteristic linear in the adjustment range Large
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More informationINLINE Flow sensor for hazardous area II 1 G/D - II 2 D - II 3 GD - I M1
INLINE Flow sensor for hazardous area II G/D - II D - II GD - I M Type SE0 Ex can be combined with... Flow meter with NAMUR or NPN/PNP output signal Mounting, dismounting of electronics by a Quarter-Turn
More informationType Z & Ex pz purge and pressurization system
Type Z & Ex pz purge and pressurization system Features 100% automatic purge and pressurization system including purging, temperature and leakage control, alarming and system power Third party approvals
More information3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
More informationHERION SERIES Indirect solenoid actuated soft seal
HERION 9700 SERIES Indirect solenoid actuated soft seal spool valves with NAMUR interface /, 5/ - G/ For single and double acting actuators Crossover-free switching, switchover function guaranteed even
More informationVALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
More informationEPS 16 ATEX 1072 X, IECEx EPS X. Operating Instructions. Solenoid coil Type AC19 Magnetspule Typ AC19 Bobine magnétique Type AC19
, IECEx EPS 16.0030X Solenoid coil Type AC19 Magnetspule Typ AC19 Bobine magnétique Type AC19 Device with II 2G/D Ex approval Geräte mit II 2G/D Ex Zulassung Appareils avec mode de protection II 2G/D Ex
More informationDirect-acting 2/2-way plunger valve
Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding
More information0322, 0324, Pilot Solenoid Valve, Plastic
Pilot Solenoid Valve, Plastic Construction The directly controlled GEMÜ 3/2-way pilot solenoid valve consists of an epoxy encapsulated detachable coil and a plastic body. The electrical connection is made
More informationPTB 14 ATEX 2023 X, IECEx PTB X. Operating Instructions. Solenoid coil Type AC10 Magnetspule Typ AC10 Bobine magnétique Type AC10
, IECEx PTB 14.0049X Solenoid coil Type AC10 Magnetspule Typ AC10 Bobine magnétique Type AC10 Device with II 2G/D Ex approval Geräte mit II 2G/D Ex Zulassung Appareils avec mode de protection II 2G/D Ex
More informationIndirect servo-operated 2/2-way solenoid valves Type EV220W 10 - EV220W 50, NBR and EPDM versions
Data sheet Indirect servo-operated 2/2-way solenoid valves Type EV220W 10 - EV220W 50, NBR and EPDM versions EV220W is a range of compact indirect servo- operated 2/2 way solenoid valves with connections
More informationType 5411, Operating Instructions. Bedienungsanleitung Manuel d utilisation
Type 5411, 5413 3/2 or 4/2 way solenoid valve 3/2 oder 4/2-Wege-Magnetventil Électrovanne 3/2 ou 4/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 THE OPERATING INSTRUCTIONS The
More information2/2- and 3/2-way solenoid valve for aggressive fluids
2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More informationDirect-acting 2/2- or 3/2-way pivoted armature valve
0330 Direct-acting 2/2- or 3/2-way pivoted armature valve Direct-acting, media-separated valve with diameter of up to DN 5 Maintenance-free pivoted armature technology Vibration-proof, block screwed coil
More informationExplosion and flame-proof cast iron electric motors
Explosion and flame-proof cast iron electric motors EEx-d, EEx-de, IIB, IIC II, 2G IP55 II, 2G&D IP66 T4, T5, T6 Frame size 56 to 160 3 phases Voltage 230/400 V 50Hz Voltage 265/460V 60Hz Types of mounting
More informationPoppet Valves Series. Keeping the World Flowing
Poppet Valves 750 Series Keeping the World Flowing Contents Section Page Introduction 750 Series Poppet Valve Pilot operated 4 /4 to / Pilot operated 5 /4 to Pilot operated 6 Pilot operated 7 /4 to / Pilot
More informationUSER s MANUAL 1. GENERAL INFORMATION 2. PRODUCT IDENTIFICATION
1. GENERAL INFORMATION The MICROSOL intrinsic safety solenoid valves produced by Fluid Automation Systems SA are dedicated to piloting fluids in explosive atmospheres according to the ATEX 94/9/CE directive,
More information国家级仪器仪表防爆安全监督检验站 National Supervision and Inspection Centre for Explosion Protection and Safety of Instrumentation (GYJ12.1230X) (Attachment I) AttachmentⅠ (Translation) Solenoid type 11A52, 11C52, 11E52
More informationType 6213 EV, 6281 EV
Type 6213 EV, 6281 EV 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 OPERATING INSTRUCTIONS The operating instructions
More informationILED Dorado. User Manual
10NM U-code Medium Intensity Obstruction Light Helideck Status Light 15NM U-code Contents 1. Safety... 3 2. Warranty... 3 2.1 General... 3 2.2 Life span... 3 3. Type plate... 4 4. Product Description...
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
More informationD4B- N. Safety Interlock Switches. Safety Limit Switch. Specifications. Standards and EC Directives. Certified Standard Ratings D4BN
Safety Interlock Switches D4B- N D4BN Safety Limit Switch Snap-action contact with certified direct operation. mechanism (NC contacts only) added to enable contacts when faults occur, such as fused contacts.
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
More informationIQL Helios Area-/Streetlight. User Manual
Contents 1. Safety... 3 2. Warranty... 3 2.1 General... 3 2.2 Life span... 3 3. Type plate... 4 4. Product Description... 5 5. Specifications... 6 5.1 General... 6 5.2 Dimensions... 6 6. Installation...
More informationSOLENOID VALVES PIV.M 15 mm
SOLENOID VALVES PIV.M mm / NC/NO direct control microvalves Possible assembly on single and multiple bases Monostable manual actuation as standard Assembly in any position Operation with filtered lubricated
More informationPTB 14 ATEX 2023 X, EPS 16 ATEX 1046 X. Operating Instructions. Solenoid coil Type AC10 Magnetspule Typ AC10 Bobine magnétique Type AC10
PTB 14 ATEX 2023 X, EPS 16 ATEX 1046 X Solenoid coil Type AC10 Magnetspule Typ AC10 Bobine magnétique Type AC10 Device with II 2G/D Ex approval Geräte mit II 2G/D Ex Zulassung Appareils avec mode de protection
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationMiniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
More informationAttachments. Explosion-proof actuators. For opening and closing multileaf dampers installed in potentially explosive atmospheres (ATEX) 09/2017 DE/en
X X testregistrierung Attachments Limit switch Solenoid valve Pneumatic actuator Electric actuator For opening and closing multileaf dampers installed in potentially explosive atmospheres (ATEX) for Type
More informationSOLENOID VALVES FOR REFRIGERATING SYSTEMS
SOLENOID VALVES 17 SOLENOID VALVES FO EFIGEATING SYSTEMS APPLICATIONS The solenoid valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive 97/23/EC,
More informationSafety switches for hinged doors
4C Safety switches for hinged doors Selection diagram CONTACT BLOCKS 18 7 9 20 overlapped 1NO+ FD FL FC 21 22 33 34 2NO+1NC 3NC CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationDirectional Control Valve Series D1VW
Characteristics The NG6 directional control valve series D1VW provides high functional limits up to 8 l/min in combination with a very low, energy-saving pressure drop. A wide variety of spool options
More informationVALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
More informationMaterial pressure (bar) (Cv (US) kv x 1,2 Seat
00 / way poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V 9 Valves for safety systems up to SIL Solenoid valve
More informationElectrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
More informationFor single and double operated actuators. Exhaust air recirculation (3/2 way function)
For single and double operated actuators /-, 5/- and 5/ Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4 or /4 NPT NAMUR interface Exhaust
More informationSafety switches for hinged doors
4 Safety switches for hinged doors Selection diagram FR FM FX FZ FK 5 18 7 9 snap action overlapped CONTACT BLOCKS 20 21 22 33 34 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland
More information3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
More information3-Way Solenoid Valve - Direct Acting
3-Way Solenoid Valve - Direct Acting General application valves for dry or lubricated air, neutral gases and liquids Description: Applications: 3-Way Solenoid Valve - Direct Acting - Normally Closed. Coil
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
More informationShort form catalogue ATEX certified products
Short form catalogue certified products Products classified for the use in potentially esplosive atmospheres (Directive Atex 94/9/CE) As from the first of July 2003, all products which are commercialised
More informationControl Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België
Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part
More informationSolenoid coils. Festo core product range Covers 80% of your automation tasks
Solenoid coils q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More information