zamak nitrile rubber self-extinguishing technopolymes aluminum

Transcription

1 0 mm - G /8 Valves and solenoid valves - G/8 threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions available: - / - // TECHNICL CHRCTERISTICS mbient temperature Fluid temperature Fluid Commutation system Ways/Positions Connections Nominal Ø Nominal flow rate -0 0 C max 0 C filtered air 0 μm not dehumidified, lubricated or not spool, /, //, 9 indirect electro-, mechanical, pneumomechanical G/8 mm = / = // = CONSTRUCTIVE CHRCTERISTICS Valve body Seals Subbase and actuators Spool zamak nitrile rubber self-extinguishing technopolymes aluminum ELECTRIC CHRCTERISTICS Electropilot/coil Voltage Power consumption Protection degree Manual override CODIFICTION KEY /U0 series V DC standard, upon request V DC V C - 0 V C - 0 V C (only for version with integrated connection) for direct current W (, V) IP with button with tool position Spool valves G D Series Type G = G/8 threaded body (except coils and connectors) = = / c.c. = / o.c. = / p.c. = // NC-NC 7 = // NC-NO 8 = // NO-NO = = DC = DC/C 0 = pneumomechanical = mechanical = = DC = DC/C o.c. = open centres c.c. = closed centres p.c. = pressurized centres Option D = external servoassisted pilot _

2 0 mm - G/8 Valves and solenoid valves Single electric impulse B D C Manual override B Coil with connector for single connection C External servoassisted pilot D Coil with intergrated connector for multipolar version DD-0**C - = Use - = Exhaust = = pneumomechanical 0 0, G-0 G-0 mechanical 8 0, G- G- Double electric impulse B D C Manual override B Coil with connector for single connection C External servoassisted pilot D Coil with intergrated connector for multipolar version DD-0**C - = Use - = Exhaust = = 0, 9 0, G- G- / c.c., ,8 G- G- / o.c., ,8 G- G- / p.c., ,8 G- G- / NC / NC 7 0,0 G- G- / NC / NO 7 0,0 G-7 G-7 / NO / NO 7 0,0 G-8 G-8 _ o.c. = open centres c.c. = closed centres p.c. = pressurized centres Solenoid valves are supplied without coil and connector

3 0 mm - G/8 Valves and solenoid valves Single impulse - = Use - = Exhaust = = pneumomechanical, 0 7 0,09 G-0 mechanical, 0 8 0,09 G- Double impulse - = Use - = Exhaust = = 0,7 0 0,0 G- / c.c. / o.c.,9 9, ,9 0,9 G- G- / p.c. / NC / NC, ,9 0,88 G- G- Spool valves / NC / NO 0,88 G-7 / NO / NO 0,88 G-8 o.c. = open centres c.c. = closed centres p.c. = pressurized centres _

4 0 mm - G/8 Valves and solenoid valves Multipolar connection Manual override / - / = Exhaust G/ 8/8-8/8 = Electropilot exhaust G/8 N = Number of valve positions 7 8 End plate Single subbase Modular tie-rods Valve Multipolar fermale connector Coil with integrated connector Bus connection card End plate with modular connection 7 8 Tightening torque for fittings Thread M M7 G/8 G/ max pair (Nm) 0 _

5 0 mm - G/8 Valves and solenoid valves Electrical connection with external connector Manual override / - / = Exhaust G/ 8/8-8/8 = Electropilot exhaust G/8 N = Number of valve positions End plate Single subbase Modular tie-rods Valve Coil Single connector Spool valves Tightening torque for fittings Thread M M7 G/8 G/ max pair (Nm) 0 _

6 ccessories GP-00 GP-0 GP- GP-80 GP-0// GP-0// threaded end plate weight: 0,0 blank end plate weight: 0,00 threaded end plate with male connector poles coils control - weight: 0,00 threaded end plate with male connector poles 8 coils control coils control (only for control more than coils max 8) weight: 0,0 sub-base with open diaphragms GP-0 without connection GP- monostable GP- bistable weight: 0,00 sub-base with closed diaphragms GP-0 without connection GP- monostable GP- bistable weight: 0,0 GP-0// GP-0// GP-80 GP-8 sub-base with closed supply and open exhausts GP-0 without connection GP- mostable GP- bistable weight: 0,0 sud-base with open supply and closed exhausts GP-0 without connection GP- mostable GP- bistable weight: 0,0 intermediate supply plate (to be used only with GP-... series) sub-base weight: 0,0 closing plate for unused station weight: 0,08 GP-00- GP-00- GP-00- GP--0/..MF GP--0/..MF GP-8 modular tie-rod valve place weight: 0,00 (package00 pcs.) modular tie-rod valve places weight: 0,00 (package00 pcs.) Z-VN0 screw M0x for tie-rods (package00 pcs.) Z-SN00 hexagonal nut M (package00 pcs.) modular tie-rod valve places weight: 0,0 (package00 pcs.) BUS connection card control side with pin GP--0MF place GP--0MF places GP--0MF places GP--0MF places GP--0MF places weight: 0,00 (for each place) BUS connection card control side with pin GP--0MF place GP--0MF places GP--0MF places GP--0MF places GP--0MF places weight: 0,00 (for each place) BUS connection card control side with 8 pin (only places) for manifolds with control and more than coils up to 8 coils use GP-8 card places and then GP--... weight: 0,00 (for each place) upon request customized solutions up to places DD-0 DD-0**C V CC W coil for single connection weight: 0,09 V CC W coil with integrated connector for multipolar version weight: 0,08 _