5/2-5/3 LIGHT VALVES Series AE (SUBBASE) 5/2-5/3 ISO 5599/1 VALVES Series BE (SUBBASE)
|
|
|
- Russell Wright
- 6 years ago
- Views:
Transcription
1 /-/ LIGHT VLVS Series (SUBBS) /-/ ISO / VLVS Series B (SUBBS) Light series valves for ISO / sub-base mounting Light series: technopolymer valve body with metall cover Interchangeability: ISO / sub-base mounting (size and ) Reliability: the mixed internal system (poppet-spool) has been used and appreciated for decades Performance: high flow rate (size = 0 Nl/min - size = 00 Nl/min), fast commutation, functioning without lubrication TCHNICL CHRCTRISTICS mbient temperature luid temperature luid Commutation system Ways/Positions Connections Nominal Ø (mm) Nominal flow rate (Nl/min) CONSTRUCTIV TURS Valve body Seals Spool Cover LCTRIC TURS lectropilot Coil Power consumption Voltage Connector Manual override C +0 C Max filtered air 0 μm, lubricated or not mixed system / max 0 indirect electro - and ISO / interface (B series sub-base) size 0 size 0 00 acetalic resin nitrilic rubber - polyurethane alluminium U - series D series, W (DC) - V (C) V DC - V DC - V C - 0 V C - 0 V C M-0 position screw low rate characteristics >> ISO P () 0 P () Qn (Nl/min) >> ISO P () 0 0 P () Qn (Nl/min) P = Working pressure P = Supply pressure Qn = Nominal flow rate 0 (0/0) Standardized valves
2 Light series valves for ISO / sub-base mounting Single/double impulse U 0 U 0 B C D 0 G H Mx Mx / 0, , 0, / 0 0 0, 0, Single impulse U U B C D 0 G H Mx Mx I Manual override / 0, 0 0, 0, Double impulse (0/0) U U B C D 0 G H Mx Mx I 0 0 Manual override / 0 0 0, 0, lectrovalves are supplied without coil, connector and locking ring
3 B/B ISO / Valves - Compliance with ISO / international standards - ull range: size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum reliability - High capacity - Short internal stroke - No lubrication - lectric connection M for - - size - Modular base - Possibility of mounting different sizes on the same sub-base TCHNICL CHRCTRISTICS mbient temperature luid temperature luid Commutation system Ways/Positions Connections Nominal Ø (mm) Nominal flow rate (Nl/min) CONSTRUCTIV CHRCTRISTICS Valve body Cover Seals Sub-base ctuators Spool LCTRIC CHRCTRISTICS lectropilot Coil Power consumption Voltage Connector Manual override size C max +0 C mixed system: filtered air 0 μm spool system: filtered air 0 μm mixed system, spool system /, / 0 max indirect electro -, mixed system: spool system: mechanical ISO / interface size 0 00 size 00 size 00 acetalic resin - mixed system: nitrile rubber and polyurethane spool system: nitrile rubber - technopolymer CNOMO (U) series U DC series, W (DC) - V (C) V DC - V DC - V C - 0 V C - 0 V C M with two position screw (standard) with button with tool (upon request) low rate characteristics >> ISO P () 0 P () Qn (Nl/min) >> ISO P () 0 0 P () Qn (Nl/min) >> ISO P () Qn (Nl/min) >> ISO P () P () P () Standardized valves (0/0) Qn (Nl/min) P = Working pressure P = Supply pressure Qn = Nominal flow rate
4 B B ISO / Standard ISO / Standard The ISO standard for valves is accepted by industry and by the majority of major valve manufactures throughout the world. The choice of valves according to ISO standard means to be at the technical forefront and to guarantee the user the interchangeability of both the valve body and the electromagnetic part ISO ISO ISO ISO B D H K L L L M P r S T,,, M,, 0 0 0, 0, M 0, 0 0 M,,, M 0,,, Standard manual overrides unctioning = with position screw = with button with tool = with embedded button, position Suitable for valve B B B Special versions available (upon request): with - position button, with position frontal button, with position button / (0/0)
5 B ISO / Valves Single/double impulse B C D G H ISO ISO ISO ISO Mx Mx Mx0 Mx0 / / / / / / MIXD SYSTM SPOOL SYSTM Single impulse not not 0, 0, , 0 0 0, 0, 0, 0 0, 0, 0 0, , 0, B C D G H I L M N 0,0 0,0 0, 0, 0,0 0,0 0, 0, 0,0 0,0 0, 0, 0,0 0,0 0, 0, 0,0 0,0 0, 0, 0,0 0,0 0, 0, B-00 B-00 B-00 B-00 B-0 B-0 B-0 B-0 B-0 B-0 B-0 B-0 B-00 B-00 B-00 B-00 B-0 B-0 B-0 B-0 B-0 B-0 B-0 B-0 ISO ISO ISO ISO,, Mx Mx Mx0 Mx0, 0,,,, 0, Manual override (0/0) / / / / MIXD SYSTM SPOOL SYSTM or manual version with button, add U to the end of the part number lectrovalves are supplied without coil, connector and locking ring 0, 0, , 0 0, 0, 0, , , 0,0, 0, 0,0,0, 0, 0,0, 0, 0,0,0, B-000 B-000 B-000 B-000 B-00 B-00 B-00 B-00 B-00 B-00 B-00 B-00 B-0 B-0 B-0 B
6 B ISO / Valves Double impulse ISO ISO ISO ISO B C D G H Mx Mx Mx0 Mx0 I L M Manual override / / / o.c. / p.c. / / / o.c. / c.c. MIXD SYSTM SPOOL SYSTM non non o.c. = open centres c.c. = closed centres p.c. = pressurized centres or manual version with button, add U to the end of the part number 0 0 0, 0 0 0, 0, , 0, , 0, 0 0 0, 0, 0, 0, 0, 0, 0, 0, ,0,0, 0,0,0, 0,0,0, 0,0 0,0,0, 0,0,0, 0,0,0, 0,0,0, 0,0,0, B-00 B-00 B-00 B-00 B-00 B-00 B-00 B-00 B-00 B-00 B-00 B-00 B-0 B-0 B-0 B-0 B-0 B-0 B-0 B-0 B-0 B-0 B-0 B-0 B-00 B-00 B-00 B-00 B-0 B-0 B-0 B-0 (0/0) lectrovalves are supplied without coil, connector and locking ring
7 B ISO / Valves with M male connector The use of component in the automotive field, coupled with components, led to the development of a traditional ISO valve with connector M placed in central position, for both valves with single as well as double contol. Single/double impulse / / / / p.c. / / o.c. / c.c. SINGL IMPULS - MIXD SYSTM SINGL IMPULS - SPOOL SYSTM DOUBL IMPULS - MIXD SYSTM DOUBL IMPULS - SPOOL SYSTM c.a. = centri aperti c.c. = centri chiusi c.p. = centri in pressione Valves are supplied with V DC coil Single impulse,,,,,,,,,,,, Double impulse 0 0, 0,0 0, 0,0 0,0,0 0,0 0,0,0 0,0,0 0,0,0 0,0,0 LCTRIC TURS Central connector Mx IP protection degree V DC voltage, W nominal power DD-0** series coil (without faston) D 00% LD indicator B-000 B-000 B-000 B-00 B-00 B-00 B-00 B-00 B-00 B-0 B-0 B-0 B-0 B-0 B-0 B-00 B-00 B-00 B-0 B-0 B-0 (0/0) vailable upon request other voltages max V DC () () R VDR VDR R L L SID SID () B C D G H ISO ISO ISO 0 0 Mx Mx Mx0 Manual override
8 B Side connections sub-bases ISO - Single sub-base, side connections G/ G/ 0,0 0,0 B-00 B-0 = Supply port - = Use - = xhaust - = Pilots ISO - Single sub-base, side connections G/ G/ 0,0 0,0 ISO - Single sub-base, side connections B-0 B- = Supply port - = Use - = xhaust - = Pilots G/ G/ 0,0 0,0 B-00 B-0 = Supply port - = Use - = xhaust - = Pilots ISO - Single sub-base, side connections (0/0) G/ G,0,0 B-00 B-0 = Supply port - = Use - = xhaust - = Pilots
9 B Dorsal connections sub-bases ISO - Single modular or Manifold sub-base,, separate exhausts G/ G/ 0,0 0,0 Single assembly: close side ports (G/ - G/) Manifold assembly with common inlet: close n. With incorporated screws and seal B-0 B-0 = Supply port - = Use - = xhaust - = Pilots ISO - Single sub-base, G/ G/ 0,0 0,0 ISO - Single sub-base, B- B- = Supply port - = Use - = xhaust - = Pilots G/ 0,0 B-0 = Supply port - = Use - = xhaust - = Pilots ISO - Single sub-base, (0/0) G/ G,0,0 B-0 B-0 = Supply port - = Use - = xhaust - = Pilots
10 B Manifold sub-bases ISO - Manifold universal system sub-base,, conveyed exhausts side impulses side impulses G/ G/ G/ G/ 0,0 0, 0,00 0, Dorsal and side connections possible. Close unused ports with caps. With incorporated screws, seals and caps included ISO - Manifold universal system inlet plate B-0 B-0 B-0S B-0S = Supply port - = Use - = xhaust - = Pilots * - * = Side pilots Section - B on top connections G/ G/ G/ On top connections B In line connections C Dorsal connetions D Only in line connections B-0 B-0 B-0 = Supply port - = xhaust C Section - D only G/ 0,0 B-0 When battery exceeds units, the mounting of plates is recommended Mixed version available upon request With incorporated screws and seal = Supply port - = xhaust ISO - Manifold universal system diaphragm - - 0,00 B-00 The diaphragm is not only the end plate of the manifold but it is also coupled with the exhaust regulator to separate two sub-bases and regulate the valves independently. In this case break the central blind hole. To get two or more pressures, break the two side blind holes. (0/0) B-0 ISO - Closing plate for sub-base material: steel weight: 0,00 (for all sub-base versions) ISO
11 B Manifold sub-bases ISO - Manifold universal system sub-base,, conveyed exhausts G/ G/ 0,00 0,00 Dorsal and side connections possible. Close unused ports with caps. With incorporated screw, seals and caps included ISO - Manifold Universal system inlet plate B-0 B- = Supply port - = Use - = xhaust - = Pilots G/ G/ 0,0 0,0 When battery exceeds units, the mounting of plates is recommended Mixed version available upon request With incorporated screw and seals ISO - Manifold universal system diaphragm B- B ,0 B- The diaphragm is not only the end plate of the manifold but it is also coupled with the exhaust regulator to separate two sub-bases and regulate the valves independently. In this case breakthe central blind hole. To get two or more pressures, break the two side blind holes. (0/0) B- ISO ISO - Closing plate for sub-base material: steel weight: 0,00 (for all sub-base versions) + 0..
12 B Manifold sub-bases ISO - Manifold universal system sub-base,, conveyed exhausts G/ G/,00,00 Dorsal and side connections possible. Close unused ports with caps. With incorporated screws, seals and caps included B-0 B-0 = Supply port - = Use - = xhaust - = Pilots ISO - Manifold Universal system inlet plate G 0,0 B-0 When battery exceeds units, the mounting of plates is recommended Mixed version available upon request With incorporated screws and seals B- B-0 ISO - Closing plate for sub-base material: steel weight: 0,00 (for all sub-base versions) ISO ISO - Universal system Cap material: steel weight: 0,00 To be used to reach two pressures (0/0).. + 0
zamak nitrile rubber self-extinguishing technopolymes aluminum
0 mm - G /8 Valves and solenoid valves - G/8 threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
5/2-5/3 VALVES (1/8" + SUBBASE) Series G
/-/ VLVES (/" SUBBSE) Series G G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact
TECHNICAL CHARACTERISTICS
BE series IO 5599/ valves 5/5/3 UNIVER, particularly sensible to market requirements, has introduced in its production program a new line of valves for IO subbases. These valves are identical in dimensions
2,1 2, , ,1 2, W (DC) - 10 VA (AC) AM-5111 U2 DB 12 V DC - 24 V DC - 24 V AC V AC V AC IP65
B Miniature Electropilots CHRCTERISTICS mbient temperature Fluid Coutation system Connections Nominal bore () Nominal flow rate (Nl/min) Power consumption Connector Sleeve Coil Voltage Protection degree
Miniature electropilots U2
Direct intervention electropilots with poppet valve system and bottom cushioned ssembly on subbase Threaded connections on the body CNOMO interface Orientable coil (360 ) separated from mechanical part
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil
14,5 PSC PSP PSR. INTEGRATED SUB-BASE MANIFOLD valve with no subbase
PS COMBOBOX Valves PSC Single electric connection INTEGRATED SUB-BASE MANIFOLD valve with no subbase REDUCED DIMENSIONS Space saving up to 0% in comparison with standard valve MANIFOLDS HIGH FLOW RATE
2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
Valves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
TECHNICAL CHARACTERISTICS
Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
Compact design suitable for use in reduced mounting space. CONTROL > Directly operated solenoid valves Series PN GENERAL DATA
> Directly operated solenoid valves Series PN Directly operated solenoid valves Series PN 3/-way Normally Closed (NC). The solenoid valves can be mounted on a single base (with M5 ports) as well as on
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
PSP PSP PSC PSR TECHNICAL CHARACTERISTICS. ComboBox series. Valves. Flow rates according to fittings:
ComboBox series The new ComboBox valves are the result of long reflections regarding the requirements of the modern user, the current market demands, the ever increasing needs in the ergonomical and ecological
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
SPOOL VALVES solenoid air operated ISO VDMA subbase-mounted body integrated pilots
ISO 07- - VDM 63 subbase-mounted body integrated pilots /-/3 Series 38 Type ISO size 0 (8 mm) GNRL Fluid ir or neutral gaz, filtered, lubricated or not Operating pressure to 8 bar mbient temperature +
Complete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
SOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
ESSENTIAL. Valves. EL series. 18 mm - G1/8 22 mm - G1/4 PNEUMATIC AUTOMATION
ESSENTIAL Valves EL series 18 mm - G1/8 22 mm - G1/4 PNEUMATIC AUTOMATION ESSENTIAL Valves EL series 18 mm (G1/8) 22 mm (G1/4) HIGH FLOW RATE 800 Nl/min (G1/8) 1700 Nl/min (G1/4) REDUCED DIMENSIONS 18
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO 5599- #, #2, #3, #4 Steel reinforced main seals 6 bar and 0 bar CNOMO solenoid pilots with locking or non-locking manual override Low
MACH 16 VALVES DISTRIBUTORS
MACH 16 VALVES Available in size 1/8 only, versions 5/2 and 5/3 and with pneumatic and solenoid actuation. The mach 16 valve is a typical small size valve, only 16 mm wide, with excellent performance 750
VALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
AUTO STAR with central connector M12x1
with central connector M2x Non corrosive spool and sleeve for long trouble free life 5/2 and Glandless Valves Actuated Sub-base Mounted ISO 5599- #, #2, #3 6 bar (4,5 W) and 0 bar (2 W) 24V DC solenoids
Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
Mounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
Pneumatic Pilot - Operated Valves Series 3 and 4
Pneumatic Pilot - Operated Valves Series 3 and 4 Series 3: 1/8 NPTF, 3/2-way and 5/2-way Series 4: 1/8, 1/4 NPTF 3/2, 5/2 and 5/3-way The pneumatically operated, 3/2-way, 5/2-way and 5/3-way, Series 3
3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
solenoid/air operated
Series Modulair 0- range G/8 to G/ SHUT-O VLVE ND SOT- STRT UNIT solenoid/air operated Modulair 50 G/ - G version: See P0-9 PPLICTION This unit provides two main functions: - Pneumatic system venting.
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
Materiali impiegati. 1 CORPO VALVOLA: Alluminio. 2 SPOLA: Alluminio 3 GUARNIZIONE SPOLA: NBR. 4 MOLLA: Acciaio. 6 PISTONE: Tecnopolimero
Caratteristiche Genarali Funzionamento: a spola Tipo valvola: interfaccia ISO 5599/1 Connessione: su sottobase ISO Materiale corpo: alluminio Uso Singolo: Si Uso in batteria: Si Funzioni disponibili: 5/2;
6/2 ways/positions flow diverters
6/2 ways/positions flow diverters RE 18302-07/07.12 Replaces: 12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 140 l/min [36,98 gpm] Ports
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
Electrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Pneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.
> Series 4 valves and solenoid valves Series 4 valves and solenoid valves New models 3/, 5/ and 5/3-way CC, CO Ports: G1/8, G1/4, G1/ Series 4 solenoid valves have been designed in the 3/, 5/, 5/3 versions
VALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
B1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
CONTROL. 2 > Control. Solenoid valves Pneumatic valves. Mechanical and manual valves. Flow control valves. Directly operated solenoid valves
> Control Solenoid valves Pneumatic valves / 7 Valves and solenoid valves Series E Mechanical and manual valves / 34 Mechanically operated minivalves Series Flow control valves Includes News / 43 Flow
6/2 ways/positions flow diverters L (VS151-VS152-VS155)
6/2 ways/positions flow diverters L721... (VS151-VS152-VS155) RE 1832-5 Edition: 2.216 Replaces: 5.214 Size 6 Series 1 Maximum operating pressure 31 bar (45 psi) Maximum flow 6 l/min (15.85 gpm) Ports
6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 18302-07/12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00
Valve Islands Series H
CATALOGUE > Release 8. Valve Islands Series H Valve Island with Pneumatics and Electronics integrated. Available versions: Multipole (PNP and NPN) and Fieldbus (Profibus-DP, DeviceNet, CANopen). Valve
6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F)
Series 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).
> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the
6 to14/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-09/12.09 1/10 L732... (VS241F-VS245F-VS246F-VS247F)
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
Spool & Sleeve Valves for ANSI Sub-Bases Series W70
Spool & Sleeve Valves for NSI Sub-ases Series W70 5/ Valves Single Direct Solenoid, Spring Return NSI Range of Valve Model vg. Dimensions mm Weight kg 1 G 1/ - W7016331 0.9 177 50 58 1.6.5 - G 1/ W70163331.
Valve Islands Series F
CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed
6/2 ways/positions flow diverters
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6/2 ways/positions flow diverters RE 1832-5/12.9 1/8 L721... (VS151-VS152-VS155) Size 6 Series 1 Maximum
ISO Standard Solenoid Valve/SIZEq Rubber Seal Series VP7 6
ISO Standard Solenoid Valve/SIZq Rubber Seal Series VP7 6 VP7 6 FPG D VP7 6 FG D position position Single solenoid (FG-S) Double solenoids (FG-D) Reverse pressure (YZ-S) Reverse pressure (YZ-D) Closed
VALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
6/2 ways/positions flow diverters L (VS120-VS125-VS129)
6/2 ways/positions flow diverters L710... VS120-VS125-VS129) RE 18302-04 Edition: 05.2014 Replaces: 07.12 Size 4 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 25 l/min 6.6 gpm) Ports
VENTTIILIT MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME. TECHNICAL DATA Valve fitting port Fluid Type Versions Operators: 0.
venttiilit MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Valve fitting port Fluid Type Versions Operators: Operating pressure C / Flow rate at 6 Bar P 0.5 Bar Flow rate at 6 Bar P 1 Bar N Installation
Individual, Multipole and Fieldbus
Valve Islands > 016 > Series Y valve islands Series Y valve islands, Individual, Multipole and Fieldbus Valve Island with integrated Pneumatics and Electronics. Available versions: Individual, Multipole,
Series 77 & 78. Compact & Modular Valves. solutions. Series 77 - Compact Valves. Series 77 - Sub-D. Series 77 - Fieldbus
PNEUMATIC valves Series 77 & 78 Compact & Modular Valves Series 77 - Compact Valves Series 77 - LPP770 Series 77 - Sub-D Series 77 - Fieldbus Series 77 - LPP772 Series 77 - Coils & Plug-in sockets Series
Series MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
Solenoid valves "OPTYMA32-S" General. Series 2200
1 General Series 2200 1 Series 2200 Solenoid - Spring 2241.52.00.39.v v VOLTAGE 02 = 24 VDC PNP 12 = 24 VDC NPN Weight gr. 67 SHORT FUNCTION CODE "A" Serie Solenoid 2200-S-GB valves - Spring "OPTYMA32-S"
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, 1/4 to 1/2
SPOOL VLVS pilot operated or air operated, spool single/dual solenoid or air (mono/bistable function) aluminium body, /4 to / NC 0 / 0 Series FTURS ll the exhaust ports of this spool valve are connectable,
02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
Series 581 ISO Pneumatic Directional Control Valves
Series 581 ISO 5599-1 Pneumatic Directional Control Valves Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series 581 - A complete series of standardized
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
A robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79U and PremiAir.
VI F79N Namur Solenoid Valve robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79 and Premiir. Features ompact design with standardized market proven NMR mounting
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Electric Drives. Linear Motion and Assembly Technologies Pneumatics Service. Valves, Series VP15. Technical data
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Valves, Series VP5 Technical data Completely mounted valve terminal system, BUSdirect (Profibus DP) Technical
NAMUR Technical details
Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered,
BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/8, 600 660 Nl/min (0.610 0.671 Cv) Technical data for series BM-01 Order code BM-01-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series inline inline hazardous location Manifold mounting 35 sub-base non plug-in sub-base with pressure regulators sub-base hazardous
Nugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
F NI/min. (G1/8), 1600 NI/min. (G1/4), 4600 NI/min.
Series AC Univer : Threaded and Solenoid, Mixed 5/; G/8", /" and /" Diecast aluminum Body 55 psi Operating pressure F Ambient temperature ABOUT UNIVER SERIES AC The "Mixed" system, which has been produced
NG06. General Size NG6 NG10 Design
Catalog HY14-255/US Series VY*K General Series VY*K pilot operated sequence valves feature proportional adjustment and an external drain. The external drain allows application as both a sequence valve
Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
NAMUR Technical details
Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free
Solenoid directional valves type DPHI, DPHU
www.atos.com Table E0805/E Solenoid directional valves type, two stage, ISO 4401 size 10, 16, 25 and 32 37**/HM..... and are spool type, two or three position directional two stage solenoid valves designed
VAL-138. Valves. Electrical Details for Solenoid Pilot. Operating Pressure
Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot ctuated ISO 5407- / VDM 24 563 Size 26 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
503 Series Solenoid Pilot Actuated Valves
Solenoid Pilot ctuated Valves Offered by: Specialists in Valves, ontrols, Pneumatics, Fluid Measurement Phone: (203) 261-6711 www.okcautomation.com 5 Ported, 2 and 3 position, 4-way, Spool & Sleeve and
Remote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
3/2-5/2 ports / positions
Series SOLENOID SPOOL VALVES G / THREADED PORTS with CNOMO pilots /-/ ports / positions SPECIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PORTS : G/ PRESSURE : to 0 bar TEMPERATURE RANGE
6 to 12/2 ways/positions bankable flow diverters flangeable
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/12.09 1/10 L711... (VS120F-VS125F)
6 to 12/2 ways/positions bankable flow diverters flangeable
6 to 12/2 ways/positions bankable flow diverters flangeable RE 18302-08/07.12 Replaces: 12.09 1/8 L711... (VS120F-VS125F) Size 4 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 20
Directional valves Pneumatically operated Series 740. Brochure
Series 740 Brochure Bosch Rexroth AG Pneumatics Series 740 Accessories 5/2-way valve, Series 740 Qn = 700-950 l/min pipe connection compressed air connection output: Ø 8x1 - Ø 10x1 Can be assembled into
Air Service Units Filter pressure regulator + Lubricator - Size 1. Series Technical characteristics. Construction and working characteristics
ir Service Units Filter pressure regulator + Lubricator - Size Series 00 Construction and working characteristics - Zinc alloy body or reinforced technopolymer body with threaded brass insert connections.
Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239
Valves Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service