Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
|
|
- Elwin Payne
- 6 years ago
- Views:
Transcription
1
2 22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm width as a logical evolution of the traditional range of coils and solenoid operators, heart of any solenoid valve. These pilot valve systems are designed for those applications where high performance, high reliability and long life are necessary. All solenoid valves of this system are designed for use with compressed air and consist of an encapsuled coil assembled on a valve with brass tube and plastic body. Please contact Amisco for use with other media. All given information are subjected to changes without notice. The 22mm and 3mm pilot valves feature: Coil system: Refer to 22mm (EVI 7/9) and 3mm (EVI/ 3/9) coil catalogues Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body The pilot valve is designed for more than 5x 6 cycles. The valve is normally equipped with seals and bistable manual override, and it can be delivered with screws for its assembling on the main valve units. Maximum suggested roughness for the pneumatic interface is Ra=.8 The coil is designed and manufactured according to EN and VDE 58 and it's suitable for industrial ambient conditions. For use in different ambient with high humidity, take contact with Amisco. The materials are UL-LISTED. 1
3 VALVE CODING SPECIFICATIONS CODE: X X X T Y K V * * TYPE 22E = 22mm EE Pilot Valve 22I = 22mm IE Pilot Valve 3C = 3mm Pilot Valve CNOMO TUBE DIAMETER 9 = Ø 9mm TUBE MATERIAL I = Stainless Steel O = Brass VALVE FUNCTION 2 = 2 Way valve 3 = 3 Way valve VALVE CONDITION C = Normally Closed O = Normally Open ORIFICE DIAMETER 22 mm 3 mm EE IE 12 = Ø 1.2 mm 15 = Ø 1.5 mm 12 = Ø 1.2 mm 16 = Ø 1.6 mm 18 = Ø 1.8 mm 12 = Ø 1.2 mm 15 = Ø 1.5 mm SEAL MATERIALS N = V = (other material on request) MANUAL OVERRIDE 22 mm 3 mm O = No override M = (no lock) Brass P = (turn and lock) Plastic O = No override M = (no lock) Brass B = (turn and lock) Brass MARKING ZN = Standard - No logo AM = Standard + Amisco Logo... = Customized marking alternative possibilities for CUSTOMER LOGO 22 mm and 3 mm PNEUMATIC PILOT VALVE STANDARD AMISCO LOGO POSITION (only valve, coil is separate) 2
4 22 mm EE PILOT VALVE Solenoid Valve Assembly SUGGESTED INTERFACE DIMENSIONS Ra =.8 3
5 22 mm EE PILOT VALVE TECHNICAL SPECIFICATIONS Function Orifice mm (Port 1) Flow rate NL/min (Port 1 >2) 6 bar Δp 1 bar Kv factor MIN Pressure bar MAX Coil Power W DC VA AC 5, ,99 6,5 8,5 5, ,99 6,5 8,5 PILOT VALVE TECHNICAL DATA Valve function Media Lubrication Temperature Orifice size Pressure Response time Life time expectancy Manual override Assembly Fixing Material - air not necessary -2 C + 5 C (for use with different temperature please contact Amisco) - mm bar 8 15 ms 5 million cycles monostable - bistable - no override in any position n 2 screws M3 x 2 valve body glass reinforced Polyester seals - (other materials on request) cores stainless steel core tube brass - stainless steel springs stainless steel COIL TECHNICAL DATA The valves have to be used with the related 22mm (EVI 7/9) Amisco coil. Please refer to the specific catalogue for these products. 4
6 22 mm IE PILOT VALVE Solenoid Valve Assembly 3/2 NO SUGGESTED INTERFACE DIMENSIONS Ra =.8 5
7 22 mm IE PILOT VALVE TECHNICAL SPECIFICATIONS Function Orifice mm (Port 1) Flow rate NL/min (Port 1 >2) 6 bar Δp 1 bar Kv factor MIN Pressure bar MAX Coil Power W DC VA AC 5, ,6 65,98 2 6,5 8,5 1, ,5 8,5 3/2 NO 1,6 6,9 7 6,5 8,5 3/2 NO 1,8 65,98 6 6,5 8,5 PILOT VALVE TECHNICAL DATA Valve function Media Lubrication Temperature Orifice size Pressure Response time Life time expectancy Manual override Assembly Fixing Material - 3/2 NO air not necessary -2 C + 5 C (for use with different temperature please contact Amisco) 1,6-1,8 mm bar 8 15 ms 5 million cycles bistable - no override in any position n 2 screws M3 x 2 valve body glass reinforced Polyester seals - (other materials on request) cores stainless steel core tube brass - stainless steel springs stainless steel COIL TECHNICAL DATA The valves have to be used with the related 22mm (EVI 7/9) Amisco coil. Please refer to the specific catalogue for these products. 6
8 3 mm PILOT VALVE - CNOMO M8 M5 Ø6.9 PORT 3(R) 2(A) Ø9.4 Max PORT 2(A) PORT 1(P) 1(P) 3(R) M8 2(A) Ø9.4 Max PORT 2(A) PORT 1(P) 1(P) Interface dimensions R4 7.5 = = Ø Ra = SCREW SUGGESTED M4x3 (x2) min
9 3 mm PILOT VALVE - CNOMO TECHNICAL SPECIFICATIONS Function Orifice mm (Port 1) Flow rate NL/min (Port 1 >2) 6 bar Δp 1 bar Kv factor MIN Pressure bar MAX Coil Power W DC VA AC 5, , ,8 4, ,8 4,5 5 PILOT VALVE TECHNICAL DATA Valve function Media Lubrication Temperature Orifice size Pressure Response time Life time expectancy Manual override ASSEMBLY Fixing Material - air not necessary -2 C + 5 C (for use with different temperature contact Amisco) - mm bar 8 15 ms 5 million cycles monostable - bistable - no override in any position n 2 screws M4 x 3 (not supplied by Amisco) valve body PPS seals - cores stainless steel core tube brass - stainless steel springs stainless steel COIL TECHNICAL DATA The valves have to be used with the related 3mm (EVI 3/9) Amisco coil. Please refer to the specific catalogue for these products. 8
10 22mm - 3mm PILOT VALVE STANDARD CODING SPECIFICATION (The coil has to be ordered separately) 9 Valve Type Function Inlet orifice ø Seals Manual Override Valve Code 22mm EE 22mm IE 3mm CNOMO 3/2 NO 1,6 1,8 1,6 1,8 22E9O3C12NMAM 22E9O3C12NPAM 22E9O3C12NOAM 22E9O3C12VMAM 22E9O3C12VPAM 22E9O3C12VOAM 22E9O3C15NMAM 22E9O3C15NPAM 22E9O3C15NOAM 22E9O3C15VMAM 22E9O3C15VPAM 22E9O3C15VOAM 22E9O2C12NMAM 22E9O2C12NPAM 22E9O2C12NOAM 22E9O2C12VMAM 22E9O2C12VPAM 22E9O2C12VOAM 22E9O2C15NMAM 22E9O2C15NPAM 22E9O2C15NOAM 22E9O2C15VMAM 22E9O2C15VPAM 22E9O2C15VOAM 22I9O3C12NPAM 22I9O3C12NOAM 22I9O3C12VPAM 22I9O3C12VOAM 22I9O3C16NPAM 22I9O3C16NOAM 22I9O3C16VPAM 22I9O3C16VOAM 22I9O3C18NPAM 22I9O3C18NOAM 22I9O3C18VPAM 22I9O3C18VOAM 22I9O3O16NPAM 22I9O3O16NOAM 22I9O3O16VPAM 22I9O3O16VOAM 22I9O3O18NPAM 22I9O3O18NOAM 22I9O3O18VPAM 22I9O3O18VOAM 3C9O3C12NMAM 3C9O3C12NBAM 3C9O3C12NOAM 3C9O3C12VMAM 3C9O3C12VBAM 3C9O3C12VOAM 3C9O2C12NMAM 3C9O2C12NBAM 3C9O2C12NOAM 3C9O2C12VMAM 3C9O2C12VBAM 3C9O2C12VOAM 3C9O3C15NMAM 3C9O3C15NBAM 3C9O3C15NOAM 3C9O3C15VMAM 3C9O3C15VBAM 3C9O3C15VOAM 3C9O2C15NMAM 3C9O2C15NBAM 3C9O2C15NOAM 3C9O2C15VMAM 3C9O2C15VBAM 3C9O2C15VOAM
11 ASSEMBLING EQUIPMENT 22mm EE 22mm IE SCREWS M3x2 UNI 7688 VALVE BODY SEAL O RING O RING The coil has to be ordered separately, screws and O-Rings are included. O RING 3 mm - CNOMO SCREWS NOT SUPPLIED (M4x3 - SUGGESTED DIMENSION) The coil has to be ordered separately. FASTENING NUTS (Note: tightening torque min-max,4:-,6 Nm) Plastic knurled nut Cod Plastic knurled nut for protected exhaust Cod Aluminium knurled nut Weavy washer Ø 8 DIN 137 type A Cod Cod
12 AMISCO S.p.A. Via Piaggio, Paderno Dugnano (Mi) Italy Tel Fax amisco@amisco.it Rev. 1/218
Solenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
More informationSolenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
More informationEVI 5 S13 Solenoid System
EVI 5 S13 Solenoid System The EVI5 S13 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 13
More informationSolenoid System. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex na II 3 GD T4 or T5).
EVI 7 S9 Solenoid System The EVI7 S9 system by AMISCO includes a wide range of solenoids, coils and operators, designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter
More information15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
More informationnickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
More informationAPPLICATION OF SYSTEM 8
System 8 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all valve components is approimately
More informationSystem 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
More informationSOGEAC SOLENOID VALVE NASS MAGNET: SYSTEM 8. s.r.l.
With pleasure we introduce on the Italian market SYSTEM 8, produced NASS MAGNET of solenoid valve that thanks to their modularity give the possibility of a wide range of easy solutions. The solenoid valve
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
More informationValves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
More informationSeries PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
More information2/2-way, 3/2-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 - cartridge ø4
CATALOGUE > Release 8.5 > Directly operated solenoid valves Series A Directly operated solenoid valves Series A /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 and G1/8 -
More informationSystem 13. ü ( System 13
System ü www.nassmagnet.com ( +9 676-0 System The name System stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures of all
More information5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
More informationSeries P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
More informationSystem 6. Solenoid Coils Armature Assemblies Valve Systems
Solenoid Coils Armature Assemblies Valve Systems a Kft. i r á g n u H t e n nass mag Precision Controls Kft. since 0 Nass Controls LP Nass Magnet GmbH Introduction.........................................
More informationSystem 6. ü ( System 6
System 6 ü www.nassmagnet.com ( +9 511 676-0 System 6 The name System 6 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More informationSOLENOID VALVES AND PNEUMATIC VALVES
A S E R I E S Catalogue 001 Directly operated solenoid valves Series A / way, 3/ way monostable, stable (with magnetic memory) Ports M5, G1/8, cartridge ø 4 The Series A solenoid valves are of the directly
More informationSOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
More informationMiniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
More informationMINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
More informationSeries MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
More informationElectrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
More informationVALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
More informationMN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
More informationFor mounting on subbase or footprint in accordance with CNOMO recommendation E 06620N Part numbers (and voltages) Voltage max. power consumption U nom
Intrinsically Safe Miniature Solenoid Valves Order/Technical Support Tel: (800) 6775 / FAX: (800) 677865 / www.crouzetusa.com 5/6 5 For mounting on subbase or footprint in accordance with CNOMO recommendation
More informationIntrinsically Safe Miniature Solenoid Valves
Intrinsically Safe Miniature Solenoid Valves 5 Order/Technical Support Tel: (800) 6775 / FAX: (800) 677865 / www.crouzetusa.com 5/6 Intrinsically safe miniature solenoid valves EEx ia T6 approval no. 9
More informationVALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 5599/, SERIES IPV-ISV The assembly surface dimensions of ISO, ISO2 and ISO 3 valves are to ISO5599-. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid
More information10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
More informationSOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
More informationData sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472
Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on
More information5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO 5599- #, #2, #3, #4 Steel reinforced main seals 6 bar and 0 bar CNOMO solenoid pilots with locking or non-locking manual override Low
More information2-way pilot operated solenoid valves for water, hot water and steam. Catalogue 8658/GB December 1999
-way pilot operated solenoid valves for water, hot water and steam Catalogue 88/GB December 999 88/GB Technical specifications General description The Water Valves are diaphragm operated valves and require
More informationElectro-pneumatic control valves
Electropneumatic control valves Visit our website for further information www.crouzet.com 9 Electropneumatic miniature solenoid Miniature solenoid valves Terminals Wires Connector LED indicators Valve
More informationValve Islands Series F
CATALOGUE > s 01 Valve Islands Series F > Valve Island Series F Multipole integrated electrical connection (PNP) Valve functions: x/; x3/; 5/; 5/3 CC The use of technopolymer in this Series has allowed
More informationMINI-SOLENOID VALVES direct operated subbase mounted, CNOMO (15 mm width) connector size 15
MINI-SOLENOID VALVES direct operated subbase mounted, CNOMO ( mm width) connector size / Series 0 FEATURES Low consumption (0,W) Compact, monobloc solenoid pilot valve with spade-plug connector type AMP,8x0,
More informationB1 VALVES SERIES 70 DISTRIBUTORS B1.12
VALVES SERIES 70 The Series 70 forms part of Metal Work s full range of traditional valves. They are available in sizes 1/8, 1/4, 3/8 and 1/2, versions 3/2, 5/2, 5/3 and double 3/2, with mechanical, manual,
More informationMINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME
MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Minivalves with / NO NC poppet, Installation in any position Push-in fittings for pipe Ø 4 mm and on the valve body Low actuation force Rapid, accurate
More informationCOILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
More informationHigh Flow Valve Actuation Range. NAMUR Valves G1/4" & G1/2" Piped Valves G1/4" & G1/2" Banjo Valves G1/8" & G1/4"
31-37 High flow NAMUR valves G1/ and G1/ aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding High Flow Valve Actuation
More informationComplete Range of Movement Solutions
Complete Range of Movement Solutions A complete range of Movement Solutions are available from your Local Pirtek Centre. ISO & VDMA Pneumatic Cylinders Compact Cylinders Guided Cylinders Non-Standard Cylinders
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More informationNAMUR Technical details
Valves > standardized valves > electrically operated > Series MN-06 NAMUR Technical details Connection Series Nominal MN-06 size Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered, oil-free
More informationElectrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
More information300 SERIES DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS
DRESSER NUT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Diecast aluminium (anodised) Body Diecast aluminium (anodised) Pilot base Brass (chromed) Pilot Diaphragm NBR Bolts and screws
More informationVALVES SERIES 70 DISTRIBUTORS
VALVES SERIES 70 This is Metal Work s full range. Available in three sizes: 1/8, 1/4, 3/8, 1/2. Three versions: 3/2; 5/2; 5/3, four different types of actuation (mechanical, manual, pneumatic and electric).
More informationVALVES ISO 5599/1, SERIES IPV-ISV
The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO5599-1. They are available in the 5-way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA
More information2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
More information2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
More information3/2-5/2 ports / positions
Series SOLENOID SPOOL VALVES G / THREADED PORTS with CNOMO pilots /-/ ports / positions SPECIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PORTS : G/ PRESSURE : to 0 bar TEMPERATURE RANGE
More informationPneumatic Valve 4V100 Series
tic Valves Pneumatic Valve 4V100 4V100 Low power consumption exhaust for the pilot and main valve, small size, large flow, good appearance, flexible, can be integrated installation, high wear resistant
More informationSolenoid valve. Solenoid Coil
Solenoid valve Solenoid valve Solenoid Coil Plunger Valve body A simple solenoid valve consists ofi: Valve body with a plunger the plunger is made of metal Coil an electrical coil if the coil is given
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationSeries 77 & 78. Compact & Modular Valves. solutions. Series 77 - Compact Valves. Series 77 - Sub-D. Series 77 - Fieldbus
PNEUMATIC valves Series 77 & 78 Compact & Modular Valves Series 77 - Compact Valves Series 77 - LPP770 Series 77 - Sub-D Series 77 - Fieldbus Series 77 - LPP772 Series 77 - Coils & Plug-in sockets Series
More informationLockable isolation 3/2-way valves Series MX 3/
CATALOGUE > Release 8.5 > /2-way isolation valves Series MX Lockable isolation /2-way valves Series MX New MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Modular Manual, electro-pneumatic, servo-pilot and
More informationNAMUR Technical details
Valves > standardized valves > electrically operated > Series KN-0, KN- NAMUR Technical details Connection Nominal size Series KN-0, KN- Temperature range Medium G1/4, Namur 6 mm -10 C... +70 C Filtered,
More informationMECAIR 300 SERIES DRESSER NUT VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
300 SERIES DRESSER NUT VALVES CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES VALVE FLUIDS PRESSURE RANGE Filtered air and oil free Standard Nitrile: 20 C/+80 C Optional Viton: 30 C/+200
More informationN/** поставка оборудования для подготовки воздуха
M/0000 Series Inline /, 5/ and 5/ Spool Valves Solenoid and Pilot Actuated G / Low power solenoids High flow Unique steel reinforced seals Light weight corrosion resistant materials Technical Data Medium:
More informationElectrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
More informationAssisted lift operated 2/2-way solenoid valves Type EV251B
Data sheet Assisted lift operated 2/2-way solenoid valves Type EV251B EV251B with assisted lift is especially suitable for applications such as closed systems with low and fluctuating pressure conditions
More informationPneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.
> Series 4 valves and solenoid valves Series 4 valves and solenoid valves New models 3/, 5/ and 5/3-way CC, CO Ports: G1/8, G1/4, G1/ Series 4 solenoid valves have been designed in the 3/, 5/, 5/3 versions
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More informationMounting on manifold strip. Working pressure min./max. Max. particle size 5 µm. Connector standard ISO 15217
1 00137795 Version Spool valve, zero overlap Sealing principle Soft sealing Mounting on manifold strip P-strip Working pressure min./max. See table below Control pressure See table below min./max. Ambient
More informationBinary Counter Valve. Catalogue PDE2308TCUK-ab
Binary Counter Valve Catalogue PDE2308TCUK-ab 1 Signal= 2 functions Type TD 210-GR - pneumatic actuated TD 213-GR - electrical actuated Technical description As a completion of the existing valve program,
More informationSERIES PRE PROPORTIONAL PRESSURE REGULATOR WITH COILVISION TECHNOLOGY
SERIES PRE PROPORTIONAL PRESSURE REGULATOR WITH COILVISION TECHNOLOGY 4.0 READY SERIES PRE PRESSURE UNDER CONTROL WITH DIAGNOSIS THROUGH THE CLOUD NFC WIRELESS MICRO USB The Series PRE proportional pressure
More informationDL /116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SERIES 10 SUBPLATE MOUNTING ISO p max 320 bar Q max 125 l/min
41 330/116 ED SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT VERSION SUBPLATE MOUNTING ISO 4401-05 p max 320 bar Q max 125 l/min MOUNTING INTERFACE OPERATING PRINCIPLE ISO 4401-05-04-0-05 (CETOP 4.2-4-05-320)
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationSeries
PNEUMATI valves Series 79-8 - 84-85 - 87 Steelspool Valves Solenoid Valves Mechanical Valves Pneumatic Valves oils & Plug-in sockets VM/EN 4 The components illustrated and described in the present calalogue
More information2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
More informationSPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 4 2 5 4 2 5 4 2 5 4 2 5 5/2 Series 55 FEATURES The monostable spool valves have TÜV certified
More informationSolenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationTECHNICAL CHARACTERISTICS
Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation
More informationSPOOL VALVE. solenoid air operated 3/2 G 1/4. SPECIFICATIONS : air or neutral gas, filtered, lubricated or not PORTS : G 1/4 CONSTRUCTION
Series SPOOL VALV solenoid air operated / G /4 SPCIFICATIONS FLUI : air or neutral gas, filtered, lubricated or not PORTS : G /4 PRSSUR : to 0 bar TMPRATUR : - C, + 60 C FLOW (Qv at 6 bar) : 860 I/min
More informationSPOOL VALVES pilot operated or air operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 NC 0 0 / Series 55 FEATURES The monostable spool valves have TÜV certified IEC 6508
More information200 SERIES THREADED VALVES PENTAIR CLEAN AIR SYSTEMS
THREADED VALVES PENTAIR CLEAN AIR SYSTEMS Lock nut DESCRIPTION The is a range of diaphragm valves suitable for dust collector applications, in particular for reverse pulse-jet filter cleaning of filter
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationVENTTIILIT MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME. TECHNICAL DATA Valve fitting port Fluid Type Versions Operators: 0.
venttiilit MINIVALVES, MECHANICALLY AND HAND OPERATED SERIES VME Valve fitting port Fluid Type Versions Operators: Operating pressure C / Flow rate at 6 Bar P 0.5 Bar Flow rate at 6 Bar P 1 Bar N Installation
More informationStandard valves to ISO Product range overview
Standard valves to ISO 15218 Product range overview Function Electrical connection Voltage Manual override Page/Internet Pilot valve to ISO 15218 Width 15 mm Plug connector type C, to EN 175301-803 Plug
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More informationSeries RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
More informationSeries 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).
> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More information600/700 SERIES FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS
FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium (anodised)
More informationViking Xtreme Valves. High reliability Few moving parts result in high reliability, rapid changeover and very long life.
Cable plugs and connectors are available in several variants. High electric protection class: IP65 or IP67. Smooth casing, suitable for food industry applications. High flow rate, long life. Terminal layout
More informationIndividual, Multipole and Fieldbus
Valve Islands > 016 > Series Y valve islands Series Y valve islands, Individual, Multipole and Fieldbus Valve Island with integrated Pneumatics and Electronics. Available versions: Individual, Multipole,
More information14,5 PSC PSP PSR. INTEGRATED SUB-BASE MANIFOLD valve with no subbase
PS COMBOBOX Valves PSC Single electric connection INTEGRATED SUB-BASE MANIFOLD valve with no subbase REDUCED DIMENSIONS Space saving up to 0% in comparison with standard valve MANIFOLDS HIGH FLOW RATE
More information3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface
3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and
More informationSOLENOID VALVES 1. GENERAL PURPOSE VALVES ACCESSORIES ORDER CODIFICATION : TEC22 DIRECT ACTING INDIRECT ACTING
S 1. GENERAL PURPOSE VALVES DIRECT ACTING ACCESSORIES CONNECTORS FOR COILS (Protection class IP65) by DIN 43650 ADJUSTABLE TIMER to preset DUTY CYCLE A "TEST" button is provided and 2 leds are used to
More information2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
More informationThe manifolds can be powered through various fieldbus systems, multipole or common terminals.
Servo-Assisted, Modular, 8mm Wide / and 4/ Multi-Way Valves; Servo Assisted; Flow Rate: 0.6 ft /min.; /8 NPT and /4 O.D. Legris Connections Advantages / Benefits Optimum system solutions due to high level
More informationValves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
More information深圳市永旭伟业贸易有限公司 SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, 1/4.
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, / / Series FEATURES The monostable spool valves, series, have TÜV certifi ed IEC 60 Functional
More information6/2 ways/positions flow diverters
6/2 ways/positions flow diverters RE 18302-07/07.12 Replaces: 12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 140 l/min [36,98 gpm] Ports
More informationSeries 581 ISO Pneumatic Directional Control Valves
Series 581 ISO 5599-1 Pneumatic Directional Control Valves Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series 581 - A complete series of standardized
More information3/2 Way Valve G1/8. Data Sheet No E. Characteristics Symbol Unit Description General Features Spool valve.
AP64E00DX00X Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Spool valve Mounting screws M Tube connection Thread Port size ; 7.4 deep
More informationSPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, 1/4 to 1/2
SPOOL VLVS pilot operated or air operated, spool single/dual solenoid or air (mono/bistable function) aluminium body, /4 to / NC 0 / 0 Series FTURS ll the exhaust ports of this spool valve are connectable,
More informationIntroduction. Pressure drops
Directional control valves CETOP 5/NG0 Introduction The ARON directional control valves NG0 designed for subplate mounting with an interface in accordance with UNI ISO 440-05 - 04-0 - 94 standard (ex CETOP
More information