TECHNICAL CHARACTERISTICS
|
|
|
- George Johns
- 6 years ago
- Views:
Transcription
1 Miniature valves COMPA E-F series The importance of electronics in industrial automation challenges the manufacturers of pneumatic equipment to design components that can be interfaced with this automation more and more easily. This tendency has found Univer perfectly prepared with the presentation of Compa and Compa series which confirm its usual dynamism, original projects and utmost attention to the current marked demands. TECHNICAL CHARACTERISTICS COMPA - E... series Orifice: mm Working pressure: bar Ambient temperature: C Fluid temperature: C Flow capacity: Nl/min * Fluid: filtered air 10 µm, not dehumidified Body: die-cast zamak M5 threaded connections or for assembly s (or vice-versa) Modular bases with quick connections ( x ) or M5 threaded connections. Coil type: U05 part number DD---- (see section Accessories page 11). COMPA - F... series Orifice: mm Working pressure: bar Ambient temperature: C Fluid temperature: C Flow capacity: Nl/min * Fluid: filtered air 10 µm, not dehumidified Body: acetalic resin. Covers die-cast zamak Single or manifold bases, available with quick couplings (6 x ) or with threaded connections G 1/8 Advisable for cylinders Ø 5 to 63 mm. Coil type: U05 part number DD---- (see section Accessories page 11). * An indicative estimate of the factor "CV" can be obtained by dividing the capacity values expressed in Nl/min by 96. Codification key F 0 Series Return (1) Control (1) SERIES E COMPA F COMPA TYPE 0 assembly - spool system 0 M5 threaded - spool system ** 05 assembly - spool system closed centres 06 assembly - spool system open centres 07 assembly - spool system pressurized centres 08 M5 threaded - spool system closed centres** 09 M5 threaded - spool system open centres** 10 M5 threaded - spool system pressurized centres** OPERATION Spool system 1 = Supply - = Consumptions 3-5 = Exhausts 1 = Control 1 = Return 0 pneumatic 1 mechanical *** electric (d.c. only) 3 differential electrical (d.c.) pneumatic pulse 5 differential pneumatic pulse 6 electrical with external pilot input (d.c. only) 7 electrical (d.c. and a.c.) 8 electrical differential (d.c. and a.c.) 9 electrical with external pilot input (d.c. and a.c.) NOTE: 9 for control for control NOTE: to order solenoid operated valves Code in black: for d.c. version Code in blue: for a.c. version **COMPA only *** spool system for base only 105-III
2 Miniature valves COMPA Series Symbol Control (1) Return Ways Pressure Capacity Time ms (1) Version Ø mm bar Nl/min energ. (1) de-energ. (1) Mass kg Part number 1, E-00 Pneum. pilot amplified Pneumech. 1,8 10 0, E-00, ,1 F E-0 0,07 Pneum. Pneum. 3 3 E ,13 F-0 Pneumatic pilot Closed centres Pneumatic pilot Open centres Pneumatic pilot Pressurized centres 1, F-05 0, F F-07 1, E-00 E-070 0,08 Electric Pneumech., E-00 E ,13 F-00 F E-0 E-077 0,11 Electric Electric E-0 E ,15 F-0 F-077 The part numbers of valves do not include coils 106-III
3 Miniature valves COMPA Series Symbol Control (1) Return (1) Version Ways Ø mm Pressure bar Capacity Nl/min Time ms energ. de-energ. (1) (1) Mass kg Part number Solenoid pilot Closed centres ,1 0,16 E-08 E-05 F-05 F-0577 Solenoid pilot Open centres ,1 0,16 E-09 E-06 F-06 F-0677 Solenoid pilot Pressurized centres with mechanical or manual actuation ,1 0,16 E-10 E-07 F-07 F-0777 Symbol Control (1) Return Ways Pressure Capacity Mass Version (1) Ø mm bar Nl/min kg Part number Tappet mech ,07 E-150A Tappet for operation Al-35.. mech ,07 E-1503A Tappet for operation Al-35..Q for panel mech. Pneum ,08 0,09 E-151A E-151P Lever colour Part number Yellow E-15G Lever Lever ,09 Black E-15N Red E-15R Green E-15V With regard to panel mounted mechanical/manual operators, please refer to section Accessories. The part numbers of valves do not include coils 107-III
4 Compa - Overall dimensions valve - Single pneumatic control (threaded ) valve - Double pneumatic control (threaded ) valve - Single electric control (threaded ) valve - Double electric control (threaded ) valve - Single pneumatic control ( on subbase) valve - Double pneumatic control ( on sub-base) valve - Single electric control ( on sub-base) * Overall dimensions of module valve - Double electric control ( on sub-base) valve - Single electric control with bracket ( on sub-base) valve - Double electric control with bracket ( on sub-base) 108-III * Overall dimensions of module
5 Compa - Overall dimensions valve - lever (threaded ) valve - push pull (threaded ) valve - mechanical operation (threaded ) valve - screw mechanical operation (threaded ) valve - panel mechanical operation (threaded ) AI-3570 AI-3571 AI-357 nero AI III
6 Compa - sub-bases Overall dimensions Material Mass kg Part number G 1/8 inlet plate zamak 0,055 E = Supply 3-5 = Exhausts - = Consumptions Manifold sub-base with dorsal outlets M5 zamak 0,095 E = Consumptions 1 = Control 1 = Return Manifold sub-base with side outlets M5 zamak 0,095 E = Consumptions 1 = Control 1 = Return Manifold sub-base with quick side couplings Ø x quick couplings Ø pipe x zamak 0,100 0,09 E-510 (pneumatic) E- 511 (electric) - = Consumptions 1 = Control 1 = Return 110-III
7 Compa - Overall dimensions - valves - single or double pneumatic control valves for sub-base - single electric control - valves for sub-base - double electric control 111-III
8 Compa -Sub-bases Overall dimensions Material Mass kg Part number G 1/8 inlet plate 0,050 F = Supply 3-5 = Exhausts - = Consumptions Manifold sub-base with threaded connections G 1/8 0,06 F = Consumptions 1 = Control 1 = Return Manifold sub-base with quick side connections Ø 6x quick couplings pipe 0,065 F-510 (pneumatic) F-511 (electric) quick couplings pipe - = Consumptions 1 = Control 1 = Return Single sub-base with threaded connections G 1/8 0,07 F = Consumptions 3-5 = Exhausts 1 = Control 1 = Return Single sub-base with quick connections Ø 6x* - Ø** 0,057 F-50 (pneumatic) F-51 (electric) - = Consumptions 3-5 = Exhausts 1 = Control 1 = Return 11-III
TECHNICAL CHARACTERISTICS
BE series IO 5599/ valves 5/5/3 UNIVER, particularly sensible to market requirements, has introduced in its production program a new line of valves for IO subbases. These valves are identical in dimensions
F NI/min. (G1/8), 1600 NI/min. (G1/4), 4600 NI/min.
Series AC Univer : Threaded and Solenoid, Mixed 5/; G/8", /" and /" Diecast aluminum Body 55 psi Operating pressure F Ambient temperature ABOUT UNIVER SERIES AC The "Mixed" system, which has been produced
C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 G1/4 8,5
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS Ambient temperature Fluid Commutation system Pressure Max Connections Nominal bore (mm) Nominal flow rate (Nl/min) Valve body Seals Spool Electropilot/Coil
5/2-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm
> Series E valves and solenoid valves Series E valves and solenoid valves 5/-way monostable/bistable - 5/3 CC, CO, CP With outlets on the body - For individual or manifold assembly Size 10,5 mm Series
Valves and Solenoid valves Series E 2/
CATALOGUE > Release 8.6 > Series E valves and solenoid valves Valves and Solenoid valves Series E 5/-way monostable/bistable - 5/3 CC CO CP With outlets on the body - For individual or manifold assembly
PSP PSP PSC PSR TECHNICAL CHARACTERISTICS. ComboBox series. Valves. Flow rates according to fittings:
ComboBox series The new ComboBox valves are the result of long reflections regarding the requirements of the modern user, the current market demands, the ever increasing needs in the ergonomical and ecological
5/2-5/3 VALVES (1/8" + SUBBASE) Series G
/-/ VLVES (/" SUBBSE) Series G G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact
14,5 PSC PSP PSR. INTEGRATED SUB-BASE MANIFOLD valve with no subbase
PS COMBOBOX Valves PSC Single electric connection INTEGRATED SUB-BASE MANIFOLD valve with no subbase REDUCED DIMENSIONS Space saving up to 0% in comparison with standard valve MANIFOLDS HIGH FLOW RATE
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO #1, #2, #3, #4 Steel reinforced main seals
5/2 and 5/3 Valves Solenoid and Pilot Actuated Sub-base Mounted ISO 5599- #, #2, #3, #4 Steel reinforced main seals 6 bar and 0 bar CNOMO solenoid pilots with locking or non-locking manual override Low
Pneumatically actuated valves 3/2 NC become NO when the supply is on connection 3.
> Series 4 valves and solenoid valves Series 4 valves and solenoid valves New models 3/, 5/ and 5/3-way CC, CO Ports: G1/8, G1/4, G1/ Series 4 solenoid valves have been designed in the 3/, 5/, 5/3 versions
zamak nitrile rubber self-extinguishing technopolymes aluminum
0 mm - G /8 Valves and solenoid valves - G/8 threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions
2/ VDMA (ISO ) 5/2-5/3-way CC CO CP. CATALOGUE > Release 8.8 CONTROL > Series 7 valves and solenoid valves GENERAL DATA
CATALOGUE > Release 8.8 > Series 7 valves and solenoid valves Series 7 valves and solenoid valves VDMA 4563 (ISO 15407-1) 5/ - 5/3-way CC CO CP Size 6 mm (VDMA 4563-01) Size 18 mm (VDMA 4563-0) GENERAL
Series 3 valves are equipped with a manual override which allows a stable operation and they can use Series U or G solenoids (22x22).
> Series 3 valves and solenoid valves Valves and Solenoid valves Series 3 x3/, 3/, 5/ and 5/3-way CC CO CP Ports G1/8 and G1/4 Series 3 solenoid valves with G1/8 and G1/4 ports have been designed in the
INTEGRATED ELEMENTS. 1. FLIP-FLOP VALVES (pneumatic) ORDER CODIFICATION : AZ100354
INTEGRATED ELEMENTS 1. FLIP-FLOP VALVES (pneumatic) It frequently happens that with only one pilot signal available it is necessary to determine any reciprocating movement having two stationary positions.
Valves and Solenoid valves Series 7
> Valves and Solenoid valves Series 7 Valves and Solenoid valves Series 7 CATALOGUE > Release 8.4 ISO valves, VDMA 4563 standards 5/ 5/3 way CC CO CP Size 6 mm (VDMA 01) Size 18 mm (VDMA 0) GENERAL DATA
AUTO STAR with central connector M12x1
with central connector M2x Non corrosive spool and sleeve for long trouble free life 5/2 and Glandless Valves Actuated Sub-base Mounted ISO 5599- #, #2, #3 6 bar (4,5 W) and 0 bar (2 W) 24V DC solenoids
Series RE-46. Valve terminals > Technical details. Order code RE-46/**-*-***-*** Temperature range Medium -10 C C
Technical details Temperature range Medium -0 C... +50 C Filtered, oil-free and dried compressed air according to ISO 857-:00, Class 7::, instrument air, free of aggressive additives. Alternatively the
02/97 N/** Our policy is one of continued research and development. We therefore reserve the right to amend,
Nugget 0 V0 Series Integrally Ported 5/2 and 5/3 Spool Valves Solenoid Actuated and Pilot Operated Ø, Ø mm or High flow from mm body width Low power solenoids with a range of voltages Use valves singly
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in
121 1/8 NPT Solenoid and pneumatic valves size 0,86 in General Features Construction: spool type Body size: 0,86 in Ports: 1/8 NPT Body material: technopolymer Single use: Yes Manifold use: No Available
5/2-5/3 LIGHT VALVES Series AE (SUBBASE) 5/2-5/3 ISO 5599/1 VALVES Series BE (SUBBASE)
/-/ LIGHT VLVS Series (SUBBS) /-/ ISO / VLVS Series B (SUBBS) Light series valves for ISO / sub-base mounting Light series: technopolymer valve body with metall cover Interchangeability: ISO / sub-base
Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)
Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv) Order code MF-04-510-HN-442 Series and function (plug pins on top, see pictures) 441 = 12 V DC without plug socket 442 =
Body width of 10mm, Nl/min (49.08) 2W (Standard) Nl/min (78.52) 4W (U type: Large flow) Vacuum applications possible (up to 100kPa) 3 S.
High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure of 0.5MPa, subject to clean, dry air) 4 Port Direct
CABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L
CABINET MOUNTING 501 series FEATURES The 501 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI
Vacuum applications possible (up to 100kPa) Base mounted. Cylinder bore size (mm) Series CM2. Pressure: 0.5MPa Load ratio: 50% Cylinder stroke: 300mm
4 Port Direct Operated Poppet Solenoid Valve Series D1000 High speed coil with stable response times ON: 4ms, OFF: 2ms, Dispersion accuracy: ±1ms (With light and surge voltage suppressor at a supply pressure
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
10 mm solenoid valves on manifold with multiconnection D-SUB
0 mm solenoid valves on manifold with multiconnection D-SUB Air inlet from both sides Exits with ø4 push-in fittings ø4 Panel mounting possible with two M3 screws on the top side 3/2 solenoid valves Electrical
Rubber Seal VP300/500/700
Port Pilot Operated Poppet Rubber Seal 00/500/700 High flow capacity Cv1.0 (00), Cv. (500), Cv.0 (700) Low power consumption: 1.8W(DC) Possible to use as either selector valve or divider valve Changeable
Series RE-10. Valve terminals > Technical details. Order code RE-10/**-***-*** Temperature range Medium +5 C C
Technical details Temperature range Medium + C... +0 C Filtered, oil-free and dried compressed air according to ISO 8-:00, Class ::, instrument air, free of aggressive additives. Alternatively the pressure
Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Rated voltage Body
CABINET MOUNTING. 501 series
CABINET MOUNTING 50 series FEATURES The new 50 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
Nugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
VAL-138. Valves. Electrical Details for Solenoid Pilot. Operating Pressure
Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot ctuated ISO 5407- / VDM 24 563 Size 26 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich
5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range (1) Response time 3 position (2) Enclosure
For details about certified products conforming to international standards, visit us at www.smcworld.com. Port Pilot Operated Solenoid Valve Series 000 Compact and lightweight: 3 mm width Compact yet provides
Solenoid valve. Solenoid Coil
Solenoid valve Solenoid valve Solenoid Coil Plunger Valve body A simple solenoid valve consists ofi: Valve body with a plunger the plunger is made of metal Coil an electrical coil if the coil is given
Electrically operated spool valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series M-07 Technical details Connection G1/ Nominal size Temperature range Medium Series M-07 page Materials 9 mm -10 C... +70 C Filtered, oil-free and dried compressed
5 Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in. Standard Specifications. Fluid Operating pressure range
For details about certified products conforming to international standards, visit us at www.smcworld.com. Port Pilot Operated Solenoid Valve Rubber Seal, Plug-in/Non Plug-in Series VFR2 JIS Symbol type
Kuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
2,1 2, , ,1 2, W (DC) - 10 VA (AC) AM-5111 U2 DB 12 V DC - 24 V DC - 24 V AC V AC V AC IP65
B Miniature Electropilots CHRCTERISTICS mbient temperature Fluid Coutation system Connections Nominal bore () Nominal flow rate (Nl/min) Power consumption Connector Sleeve Coil Voltage Protection degree
Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239
Valves Sub-Base Mounted Valves to ISO 5599/2 Fielbus Electronics - 239 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service
Solenoid Valves. Options/Accessories - ASCO offers a wide variety of accessories and optional features to meet your specific application requirements.
Solenoid Valves The solenoid is an electromagnetic part of a valve, comprised of a coil, coretube, core and enclosure. ASCO Redhat brand offers the worlds largest selection of 2-, 3- and 4-way solenoid
Series SYA3000/5000/7000
Port Air Operated Valve Series SYA000/000/7000 How to Order A, B port size Thread type Thread piping (Inch size) - Rc Symbol Port size Applicable series Symbol Port size Applicable series F G SYA000 N
ATEX Compliant 5 Port Solenoid Valve II 2G Ex ia IIC T6 Gb Ta 10 C to 45 C. How to order. Barrier. Electrical entry
Port Solenoid Valve Series 2-SY II 2G Ex ia IIC T4...T Gb Ta 10 C to 0 C 044 II 2G Ex ia IIC T6 Gb Ta 10 C to 4 C How to order 2 SY 1 2 0 01 F TEX category 2 7 9 Series 2-SY000 2-SY7000 2-SY9000 racket
VALVES. V44/V45 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 26 mm
V44/V4 Mini ISO Star Valves x/, / and /, Solenoid and ctuated ISO 407- / VDM 4 6 Size 6 mm Compact design and high performance Flexible Sub-base system True multipressure system (including vacuum) Sandwich
5 Port Solenoid Valve
5 Port Solenoid Valve Series VFR//4/5/6 Rubber Seal Series Variations Series Sonic conductance C [dm /(s bar)] Type of actuation Voltage position single type Passage: 4/ 5/ (A/B EA/EB) Electrical entry
ATEX Compliant 5 Port Solenoid Valve II 2G Ex ia IIC T6 Gb Ta 10 C to 45 C. How to order. Barrier. Electrical entry
TEX Compliant Port Solenoid Valve Series 2-SY II 2G Ex ia IIC T4...T Gb Ta 10 C to 0 C 44 II 2G Ex ia IIC T6 Gb Ta 10 C to 4 C How to order 2 SY 1 2 0 01 F TEX category 2 7 9 Series 2-SY000 2-SY7000 2-SY9000
(Accessory, see ordering info) Wetted Materials
Series LX-Valve 8 mm Latching Solenoid Valve Typical Markets Portable Medical Equipment Environmental Monitoring Typical Applications Air & Oxygen Delivery Miniature Latching Pneumatic Solenoid Valve The
Pneumatic Pilot - Operated Valves Series 3 and 4
Pneumatic Pilot - Operated Valves Series 3 and 4 Series 3: 1/8 NPTF, 3/2-way and 5/2-way Series 4: 1/8, 1/4 NPTF 3/2, 5/2 and 5/3-way The pneumatically operated, 3/2-way, 5/2-way and 5/3-way, Series 3
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to Cv)
Electrically operated valves Series BM-01, 3/2-way and 2 x 3/2-way G1/8 550 to 660 Nl/min (0.559 to 0.671 Cv) Order code BM-01-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
BM-01. Electrically operated valves 3/2-way G 1/8, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/8, 600 660 Nl/min (0.610 0.671 Cv) Technical data for series BM-01 Order code BM-01-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
V44/V45 series, 2 x 3/2, 5/2 & 5/3 Mini ISO Valves
V/V series, x /, / & / > > x/, / and / valves, ISO 07-/ VDMA 6, Size 6 mm > > Solenoid and pilot actuated > > High performance, compact design > > Flexible sub-base system > > Multipressure system capability
Series SYA3000/5000/7000
1 Port Air Operated Valve Series SYA000/000/7000 Body ported Base mounted Base mounted How to Order A, B port size Thread type Thread piping (Inch size) Nil Rc Symbol Port size Applicable series Symbol
VALVES. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm
V40/V4 Mini ISO Star Valves x/, / and /, Solenoid and Actuated ISO 407- / VDMA 4 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators and
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to Cv)
Electrically operated valves Series BM-02, 3/2-way and 2 x 3/2-way G1/4 920 to 1090 Nl/min (0.935 to 1.001 Cv) Order code BM-02-310-HNR-462 Series and function BM = Standard Manual override HNT = non-detented
VALVES SERIES 70, SOLENOID/PNEUMATIC
VALVES SERIES 7, SOLENOID/PNEUMATIC TECHNICAL DATA Pressure range: monostable bistable asserved Minimum actuation pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow
BM-02. Electrically operated valves 3/2-way G 1/4, Nl/min ( Cv) Technical data for series. Order code BM HNR-162
Electrically operated valves 3/2-way G 1/4, 920 1090 Nl/min (0.935 1.001 Cv) Technical data for series BM-02 Order code BM-02-310-HNR-162 Series and function BM = Standard Manual override HNT = non-detented
Super X Inline 3/2 and 5/2 Spool valves, solenoid and pilot actuated
> > Port size: G/8 & G/4 > > Low and high power solenoid coil options > > End, side or face mounting solenoids > > Light weight corrosion resistant materials > > Option for manual override acting directly
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index
MANUALLY AND MECHANICALLY OPERATED VALVES Product Index Function pipe connections type of operator technology ports/positions * - instant fittings O.D. (mm) w - internal thread ØG * ØG NC NO /8 / /8 Manually
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN Type of actuation. Option.
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Body option Body
Miniature electropilots U2
Direct intervention electropilots with poppet valve system and bottom cushioned ssembly on subbase Threaded connections on the body CNOMO interface Orientable coil (360 ) separated from mechanical part
Series MI-01, MI-02, MI-03
Valves > standardized valves > electrically operated > Series MI-01, MI-02, MI-03 ISO 99/1, Size 1 to 3 Technical details Series Connection MI-01, MI-02, MI-03 ISO 99/1 Nominal size Temperature range Medium
MULTIFUNCTION SPOOL VALVES air operated and solenoid air operated G3/4-G1 - ISO 5599/1 subbase-mounted body
MULTIFUNCTION SPOOL VALVES air operated and air operated G/-G - ISO 99/ subbase-mounted body /-/ Series Type ISO size MULTIFUNCTION Multifunction selector The multifunction selector is equipped with pilot
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
3/2-way Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2 W 142 = 24 V DC, 4.2 W 152 = 24 V AC, 7/4 VA 156 = 115 V AC,
Valve: brass guiding tube plunger and core made by a magnetic stainless steel specially designed for solenoid applications polyester valve body
22mm & 3mm Pneumatic Pilot Valve Systems In order to meet the growing demand of the pneumatic industrial automation, AMISCO offers a complete range of pneumatic solenoid pilot valves with 22 mm and 3 mm
Vacuum Release Valve with Restrictor
INFORMATION Series SY3/5 Plug-in Only for External Pilot Vacuum Release Valve with Vacuum suction and release can be controlled with a single valve! PE Pilot EH port Flow rate adjustment of release air
HERION. MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES. Flexible subbase system with a wide range of accessories
MINI ISO VALVES Size 18 mm, V40 / V41 SERIES Size 26 mm, V44 / V45 SERIES HERION ISO 15407-1 / VDMA 24563 Brochure N-288 Compact design and high performance The right spool technology for critical pneumatic
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/ Nl/min (3.354 Cv)
Electrically operated valves Series M-22, 3/2-, 5/2- and 5/3-way G1/2 3300 Nl/min (3.35 Cv) Order code Series and function M-22-310-HN-12 Standard coils 1) 11 = 12 V DC,,2 W 12 = 2 V DC,,2 W 22 = 2 V AC,
Series VZ Port Solenoid Valve Body Ported. How to Order VK VZ VF VFR VP4 VZS VFS VS4 VQ7 EVS VFN. Body ported VZ L
Port Solenoid Valve Body Ported Series 000 For details about certified products conforming to international standards, visit us at www.smcworld.com. Type of actuation Type of actuation Rated voltage Body
Series SYA3000/5000/7000
Port Air Operated Valve Series SYA000/000/7000 How to Order A, B port size Thread type Thread piping (Inch size) Nil Rc Symbol Port size Applicable series Symbol Port size Applicable series F G M SYA000
5 Port Solenoid Valve Direct Operated Poppet Type. Specifications
Port Solenoid Valve Direct Operated Poppet Type Series 000 Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W
Series
PNEUMATI valves Series 79-8 - 84-85 - 87 Steelspool Valves Solenoid Valves Mechanical Valves Pneumatic Valves oils & Plug-in sockets VM/EN 4 The components illustrated and described in the present calalogue
5 Port Direct Operated Poppet Solenoid Valve, Rubber Seal
Port Direct Operated Poppet Solenoid Valve, Rubber Seal Series 3000 or details about certified products conforming to international standards, visit us at www.smcworld.com. C: 0.4 dm 3 /(s bar) (Passage
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
2 x 3/2 Way Valves Series S10
x / Way Valves Series S0 G/ and -In Connections OD 6 mm Actuation systems: Pneumatic Electrical pilot actuated Versions: x normally closed x normally open x normally closed and x normally open With external
3 Port Solenoid Valve
Port Solenoid Valve V00 Series Rubber Seal Power consumption 0. W (with power saving circuit) Note) Refer to page 7 for details. temperature rises: C (with power saving circuit) Sonic conductance Series
ISO Standard Solenoid Valve/SIZEq Rubber Seal Series VP7 6
ISO Standard Solenoid Valve/SIZq Rubber Seal Series VP7 6 VP7 6 FPG D VP7 6 FG D position position Single solenoid (FG-S) Double solenoids (FG-D) Reverse pressure (YZ-S) Reverse pressure (YZ-D) Closed
N/** поставка оборудования для подготовки воздуха
M/0000 Series Inline /, 5/ and 5/ Spool Valves Solenoid and Pilot Actuated G / Low power solenoids High flow Unique steel reinforced seals Light weight corrosion resistant materials Technical Data Medium:
Series SV1000/2000/3000/4000
Valve/Sub-plate Type IP67 Compliant Series 000/000/000/000 How to Order C () () () () () () (E) (E) () (E) (E) () () (E) (E) () () (E) (E) () () (E) (E) Type of actuation position single position double
The manifolds can be powered through various fieldbus systems, multipole or common terminals.
Servo-Assisted, Modular, 8mm Wide / and 4/ Multi-Way Valves; Servo Assisted; Flow Rate: 0.6 ft /min.; /8 NPT and /4 O.D. Legris Connections Advantages / Benefits Optimum system solutions due to high level
System 8. Solenoid Coils Armature Assemblies Valve Systems. Nass Controls LP Nass Magnet GmbH Precision Controls Kft.
Solenoid Coils Armature Assemblies Valve Systems Nass Controls LP Nass Magnet GmbH Precision Controls Kft. Introduction......................................... Page 4-5 Solenoid Coil Width 22 mm Connection
5 Port Solenoid Valve Direct Operated Poppet Type. Specifications
Port Solenoid Valve Direct Operated Poppet Type 000 Series Rubber Seal [Option] C: 0. dm /(s bar) (Passage {/ / (A/B R/R)}) Compact: Width 8 x Length 8 (mm) Low power consumption W DC (Standard type) W
Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, and 3 001 The Series 9 electropneumatically or pneumatically operated
Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves
Quic-Pics Catalogue Pneumatic Power Valves Series 75/76 Manual, Mechanical, Pneumatic and Electric Valves Contents: Product Line Overviews 2 Manually Operated Valves 5 Pushbuttons 6 Toggle Switch 8 Knob
Compact design suitable for use in reduced mounting space. CONTROL > Directly operated solenoid valves Series PN GENERAL DATA
> Directly operated solenoid valves Series PN Directly operated solenoid valves Series PN 3/-way Normally Closed (NC). The solenoid valves can be mounted on a single base (with M5 ports) as well as on
MN-06. Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series. Order code MN HN-142
Standardized valve series 3/2-way acc. to NAMUR, 750 Nl/min (0.762 Cv) Technical data for series Order code -310-HN-142 Series and function Standard coil 1) (with plug socket 28-ST-01) 141 = 12 V DC, 4.2
3 Port Solenoid Valve Direct Operated Poppet Type
3 Port Solenoid Valve Direct Operated Poppet Type VK300 Series Rubber Seal [Option] Universal porting Available for N.C. valve, N.O. valve, divider valve, selector valve, etc. C: 0.80 dm 3 /(s bar) (Passage
10 VQ F. Nil Latching type: Push-locking type (Tool required) B. Nil. Electrical entry
Series 0-VQ00 port solenoid valve How to Order Valves 0 VQ 0 F ir cylinder Clean series Series VQ Compact port valve Type of actuation Normally closed Note) Normally open Note) Normally open type is available
Servotronic Digital 615 Series
Servotronic Digital 615 Series Proportional Technology www.asco.com PRESSURE CONTROL: 615 SERIES SERVOTRONIC Digital Servotronic Digital Greater versatility in automated production processes: Due to electronics,
Electro-pneumatic control valves
Electropneumatic control valves Visit our website for further information www.crouzet.com 9 Electropneumatic miniature solenoid Miniature solenoid valves Terminals Wires Connector LED indicators Valve
Series 581 ISO Pneumatic Directional Control Valves
Series 581 ISO 5599-1 Pneumatic Directional Control Valves Series 581 Pneumatic Valves 01_1 st Headline_36 pt/14.4 mm 4-Way ISO Directional Control second line Series 581 - A complete series of standardized
Pilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
ADEX Directional Control Valves - A05/A12
Miniature low voltage solenoid valves, ideal for powering small cylinders in the packaging and process industries. Metal bodies with stand alone or manifold mounted versions. 2 sizes: M5 and 1/8" Compact
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to Cv)
Electrically operated valves Series KM-09, 5/2- and 5/3-way G1/8 680 to 950 Nl/min (0.691 to 0.966 Cv) Order code Series and function KM-09-510-HN-442 Standard coils HN at ports 2 + 4 HN at ports 1, 3
SOLENOID VALVES AND PNEUMATIC VALVES
S E R I E S P Directly operated mini-solenoid valves Series P 3/ way N.C. or N.O. Ports M5 (for single base) Cartridge ø 3 and 4 (for manifold) Note: All the serie P electrovalves are basic in DC. For
Remote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
2oo2 with bypass valve exhaust guards and indicators. 2oo2 I4. N/en
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability Modular design - Maxseal valves ypass function enables valve removal online Stainless