CABINET MOUNTING. 501 series

Transcription

1 CABINET MOUNTING 50 series FEATURES The new 50 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI 36L for 8, 2, 6 or 24 position island configurations. They can be ordered separately or installed directly on the island with or without quick connectors. High flow rate up to 400 l/min Wide electrical connection selection : G3 or 580 Fieldbus Electronics, 25 or 37 Pin Sub-D connector Version with integrated LED and electrical protection. LED indicator visible from 3 sides 580 Electronics GENERAL Operating pressure See «SPECIFICATIONS» [ bar =00 kpa] Ambient temperature range (TS) -0 C to +50 C Rated flow See «SPECIFICATIONS» conforming to ISO 6358 C (5/2) =,45 x 0-8 m3/s.pa (sonic conductance) b (5/2) = 0,40 (critical pressure ratio) Pneumatic base 4 station subbases Connection Joinable subbase Response time See «SPECIFICATIONS» fluids ( ) temperature range (TS) technology seal materials ( ) air or inert gas ISO 8573 Level C to +50 C rubber packed FPM (fluoroelastomer) Version without Vertical Shut Off CONSTRUCTION MATERIALS IN CONTACT WITH FLUID ( ) Ensure that the compatibility of the fluids in contact with the materials is verified 50 Island Zamak, E-coating treatment Body Aluminium Spool POM Piston Stainless steel Spring NBR Other seals PAM (polyarylamide), Other materials GF 50% (glass fiber reinforced) Aluminium, E-coating treatment Subbases Version without Vertical Shut Off Aluminium or stainless steel AISI 36L Port plate FPM Flat seal Stainless steel AISI 36L Support flange (option) Version with Vertical Shut Off Aluminium or stainless steel AISI 36L Port plate FPM Flat seal Stainless steel AISI 36L Support flange (option) Aluminium Spacer plate ELECTRICAL CHARACTERISTICS Coil insulation class Electrical safety Electrical enclosure protection Standard voltages Power ratings (hot/cold) (=) F IEC-EN / IEC-EN IP65 (EN 60529) DC (=) : 24V 0,7 W / 0,8 W Version with Vertical Shut Off Fielbus Electronics - 45

2 SPECIFICATIONS 50 series function 2 x 3/2 NC 2 x 3/2 NO 2 x 3/2 NC x NO type K N H symbol pilot (4) return rated flow at 6,3 bar P bar l/min (ANR) response time pilot pressure at 23 C (bar) operating pressure port open / closed max. (PS) min. air ( ) (ms) min. max. = SPOOL VALVE, RUBBER PACKED TECHNOLOGY, WITH IMPULSE MANUAL OPERATOR / R50A2BD0MA00F / R50A2BA0MA00F / R50A2BC0MA00F 5/2 S M differential return J solenoid air / ,95 8 R50A2B0MA00F / ,95 8 R50A2BN0MA00F / 2 8-0,95 8 R50A2B40MA00F 5/3 G Fielbus Electronics W closed centre position B W2 centre open to pressure E W3 centre open to exhaust Pp = 0,43 x P() + 0,9 bar Pp = Pilot Pp pressure / ,95 8 R50A2B60MA00F / 38 2,5 8-0,95 8 R50A2B70MA00F / ,95 8 R50A2B50MA00F,8 2,2 2,6 3, ,5 3,9 4,4 P() P = Working pressure

3 50 series Plug in Valve Dimensions (mm) Configurator - CAD Files 50 Series 40, ,5 4,4 6,5 weight (kg) 0,093 x8 Assembly kits x2 x6 x6 x24 25 or 37 Pin Sub-D 9 Pin Round Connector Manifold assembly with G3 Electronics & Discrete I/O x8 2 x2 () () Manifold assembly with 580 Electronics x8 x2 According 32+ Capable. x6 x24 () Fielbus Electronics - 47

4 Thread connection G = ISO 228/ 8 = NPT (contact us) 50 series Manifold assemblies kit (Electronic + End plate) G 50 A V 3 H 0 0 P A00 Configurator - CAD Files Options A00 = Panel Mount (Internal pilot supply) 4X = Panel Mount (External pilot supply from port 4) 50 ( mm valve) Revision letter Product type V = Valve Manifold Assembly No used with vertical shutt off block Electronics 8 = 580 Fieldbus Electronics D = CHARMs Electronics 3 = G3 Fieldbus Electronics J = 25 Pin Sub-D Connector M = 37 Pin Sub-D Connector Q = 9 Pin Round Connector End Plate Style P = Panel Mount - Vertical End Plates Number of Valve Stations H = 8 End Plate Port Size (-3-5) L = 2 Used with the first digit «G» or «8»: P = 6 = /8 (female thread only) X = 24 Thread connection H = Metric thread K = Push-in connectors 50 ( mm valve) Revision letter Product type M = Manifold base Z = Mid station supply F = 32+ Solenoid Manifold Subbase 48 - Fielbus Electronics Subbase H 50 A M Q4 B M A00 0 Mounting Q4 = Manifold base, 4 stations, side port, single Z-Board Panel Mount P4 = Manifold base, 4 stations, side port, double Z-Board Panel Mount Wiring option M = Plug-in Port connection B = M7 (female thread only) D = 2,7 x 4 mm (5/32) [push-in connector only] (Mid station supply not available) F = 4 x 6 mm [push-in connector only]

5 Thread connection R = Pad mount Valves R 50 A 2 B 0 M A00 F Voltage - class F = 24 V DC - class F Options 50 ( mm valve) A00 = With impulse manual operator B = With maintained manual operator M = Without manual operator Revision letter Actuation Electrical interface 2 = Rubber packed M = Plug-in (with LED indicator / DC) Valve type B = Solenoid pilot Function A = 2x3/2 NO, dual 3-way D = 2x3/2 NC, dual 3-way C = 2x3/2 NC x NO, dual 3-way F = 2x3/2 NO x NC, dual 3-way N = 5/2, Differential air return = 5/2, return 4 = 5/2, solenoid air return 5 = 5/3, W3, open center to exhaust 6 = 5/3, W, center closed 7 = 5/3, W2, open center to pressure Cabinet mounting K 50 A C A 8 B 0 0 A00 Thread connection Options G = ISO 228/ A00 = Standard (no options) 8 = NPT (contact us) F = External Mounting Flange K = Push-in connectors Fitting O-Ring 50 ( mm valve) 0 = No Fittings N = Nickel plated - NBR O-Ring F = Nickel plated - FKM (FPM) O-Ring Revision letter S = Stainless steel - FKM (FPM) O-Ring Cylinder Ports 2, 4 Port Size B = M7 (female thread only) Product type D = 2,7 x 4 mm (5/32) [push-in connector only] C = Panel Mount Assembly (Mid station supply not available) F = 4 x 6 mm [push-in connector only] Plate Style S = Stainless steel (AISI 36L) Supply and Exhaust Ports, 3/5 Port Size A = Aluminium Used with the first digit «G» or «8»: V = Stainless steel AISI 36L with Vertical Shut Off = /8 (female thread only) Used with the first digit «K»: Number of Valve Stations H = 6 x 8 mm (push-in connector) H = 8 L = 2 P = 6 X = 24 Fielbus Electronics - 49

6 Sandwich vertical shut off block Used to shut-off pressure to the valve which is mounted above it. Allows easy maintenance without the need to shut-off pressure to the whole manifold. (specified for 2x3/2 NC-NC valve) (4)(5) (4) () (2) (3) Usable only for internal pilot supply island Pay attention to residual pressures (4)(5) (4) () (2) (3) The valve(s) should not be energised during disassembly 06, ,7 26, ,35 9,35 R50AY HOW TO ORDER Description Sandwich shut off block (double) Consult the online configurator - CAD files on: Fielbus Electronics weight (kg) 0, 8,35