Solenoid valve 2/2 way N.C. With pilot control
|
|
|
- Ezra Long
- 5 years ago
- Views:
Transcription
1 Solenoid valve 2/2 way N.C. With pilot control 21H7KV1 21H8KV1 PRESENTATION: S.V. with pilot control for interception of fluids compatible with the construction materials. A minimum operational pressure of 0,1 bar is required. The materials used and the tests carried out ensure maximum reliability and duration. USE: Automation Heating PIPES: G 3/8 - G 1/2 COILS: 8W - Ø 13 BDA - BDS - BSA 155 C (class F) BDF - BDV 180 C (class H) 12W - Ø 13 UDA 155 C (class F) W - Ø 13 GDH - GDV 180 C (class H) MOULDING AND BOBBIN ARE MADE BY 100% VIRGIN MATERIAL. Max. allowable pressure (PS) bar Ambient temperature: with coils class F - 10 C + 60 C with coils class H - 10 C + 80 C Gaskets Temperature Medium V=FKM (fluoroelastomer) - 10 C +0 C Mineral oils (2 E),gasoline gas oils B=NBR (nitrile rubber) - 10 C + 90 C Air, inert gas, water E=EPDM (ethylene-propylene) - 10 C +0 C Water, low pressure steam For seals other than FKM replace the letter V with the ones corresponding to the other seals. E.I. 21H7KE1. ISO 228/1 G 3/8 Code 21H7KV1 12 ~ 2 12 G 1/2 21H8KV1 45 Max viscosity Ø Pressure Kv Power min M.O.P.D. cst E l/mn (watt) bar AC bar DC bar , The ODE reserves the right to carry out technical and aesthetic modifications without prior notification ODE 21H7KV1 21H8KV1
2 MATERIALS: Body Welded aramture tube Stainless steel AISI series 300 Fixed core Stainless steel AISI series 400 Plunger Stainless steel AISI series 400 Phase displacement ring Copper - Cu 99,9% Spring Stainless steel AISI series 300 Seal Standard: V=FKM On request: B=NBR E=EPDM Orifice On request: Connector Pg 9 or Pg 11 Connector conformity ISO 4400 FEATURES: Electrical conformity IEC 335 Protection degree IP 65 EN (DIN 40050) with coil fitted by connector. SPARE PARTS: 1. Coil: See coils list 2. Complete plunger: Code R451284/V 3. Complete cover with armature tube: Code R Complete diaphragm: Code R450916/V MAINTENANCE KIT: KTG0H7KV12=2+4 DIMENSIONS: Type ISO 228/1 21H7KV1 G 3/8 21H8KV1 G 1/2 COIL TYPE POWER ABSORPTION W Hold Inrush VA ~ VA ~ DIMENSIONS D E F B 8, U G H7KV1 21H8KV1 ODE
3 Solenoid valve 2/2 way N.C. With pilot control 21H9KV180 PRESENTATION: S.V. with pilot control for interception of fluids compatible with the construction materials. A minimum operational pressure of 0,1 bar is required. The materials used and the tests carried out ensure maximum reliability and duration. USE: Automation Heating PIPES: G 3/4 COILS: 8W - Ø 13 BDA - BDS - BSA 155 C (class F) BDF - BDV 180 C (class H) 12W - Ø 13 UDA 155 C (class F) W - Ø 13 GDH - GDV 180 C (class H) MOULDING AND BOBBIN ARE MADE BY 100% VIRGIN MATERIAL. Max. allowable pressure (PS) 16 bar Ambient temperature: with coils class F - 10 C + 60 C with coils class H - 10 C + 80 C Gaskets Temperature Medium V=FKM (fluoroelastomer) - 10 C +0 C Mineral oils (2 E),gasoline gas oil B=NBR (nitrile rubber) - 10 C + 90 C Air, inert gas, water E=EPDM (ethylene-propylene) - 10 C +0 C Water, steam For seals other than FKM replace the letter V with the ones corresponding to the other seals. E.I. 21H9KB180. ISO 228/1 Code G 3/4 21H9KV ~ Max viscosity Ø Pressure Kv Power min M.O.P.D. cst E l/mn (watt) bar AC bar DC bar , The ODE reserves the right to carry out technical and aesthetic modifications without prior notification ODE 21H9KV180
4 DIMENSIONS: MATERIALS: Body Weleded armature tube Stainless steel AISI series 300+ Fixed core Stainless steel AISI series 400 Plunger Stainless steel AISI series 400 Phase displacement ring Copper - Cu 99,9% Spring Stainless steel AISI series 300 Seal Standard: V=FKM On request: B=NBR E=EPDM Orifice On request: Connector Pg 9 or Pg 11 Connector conformity ISO 4400 FEATURES: Electrical conformity IEC 335 Protection degree IP 65 EN (DIN 40050) with coil fitted by connector SPARE PARTS: 1. Coil: See coils list 2. Complete plunger: Code R451284/V 3. Complete cover with armature tube without gasket: Code R Gasket O-Ring: Code R990105/V 5. Complete diaphragm: Code R4512/V MAINTENANCE KIT: KTG0H9KV18=2+4+5 COIL TYPE POWER ABSORPTION W Hold Inrush VA ~ VA ~ DIMENSIONS D E F B 8, U G H9KV180 ODE
5 Solenoid valve 2/2 way N.C. With pilot control 21EN2K0B105 21EN4K0B105 PRESENTATION: S.V. with pilot control for interception of fluids compatible with the construction materials. A minimum operational pressure of 0,1 bar is required. The materials used and the tests carried out ensure maximum reliability and duration. USE: Automation Heating PIPES 1/4 NPT - 1/2 NPT COILS: 8W - Ø 13 BDA - BDS - BSA 155 C (class F) BDF - BDV 180 C (class H) 12W - Ø 13 UDA 155 C (class F) W - Ø 13 GDH - GDV 180 C (class H) MOULDING AND BOBBIN ARE MADE BY 100% VIRGIN MATERIAL. Max. allowable pressure (PS) bar Ambient temperature: with coils class F - 10 C + 60 C with coils class H - 10 C + 80 C Gaskets Temperature Medium B=NBR (nitrile rubber) - 10 C + 90 C Air, inert gas, water V=FKM (fluoroelastomer) - 10 C +0 C 1/4 NPT 21EN2K0B105 Mineral oils (2 E),gasoline gas oil For seals other than NBR replace the letter B with the ones corresponding to the other seals. E.I. 21EN2K0V105. Raccordo ANSI/ASME BI..1 Code 3/8 NPT 21EN3K0B ~ 2 10,5 25 1/2 NPT 21EN4K0B Max viscosity Ø Pressure Kv Power min M.O.P.D. cst E l/mn (watt) bar AC bar DC bar , Note Available on request and with minimum quantities. The ODE reserves the right to carry out technical and aesthetic modifications without prior notification ODE 21EN2K0B105 21EN4K0B105
6 MATERIALS: : Body Armature tube Stainless steel AISI series 300 Fixed core Stainless steel AISI series 400 Plunger Stainless steel AISI series 400 Phase displacement ring Copper - Cu 99,9% Spring Stainless steel AISI series 300 Seal Standard: B=NBR On request: V=FKM Orifice On request: Connector Pg 9 or Pg 11 Connector conformity ISO 4400 FEATURES: Electrical conformity IEC 335 Protection degree IP 65 EN (DIN 40050) with coil fitted by connector. SPARE PARTS: 1. Coil: See coils list 2. Complete plunger: Code R450898/B 3. Complet cover with armature tube without gasket: Code R Gasket O-Ring: Code /BS 5. Complete diaphragm: Code R452385/B MAINTENANCE KIT: KTGEN2K0B10=2+4+5 DIMENSIONS: Type A B C 21EN2K0B105 1/4 NPT 50 21EN3K0B105 3/8 NPT EN4K0B105 1/2 NPT 72 COIL TYPE POWER ABSORPTION W Hold Inrush VA ~ VA ~ DIMENSIONS D E F B 8, U G EN2K0B105 21EN4K0B105 ODE
7 Solenoid valve 2/2 way N.C. With pilot control 21EN5KB180 PRESENTATION: S.V. with pilot control for interception of fluids compatible with the construction materials. A minimum operational pressure of 0,1 bar is required. The materials used and the tests carried out ensure maximum reliability and duration. USE: Automation Heating PIPES: 3/4 NPT COILS: 8W - Ø 13 BDA - BDS - BSA 155 C (class F) BDF - BDV 180 C (class H) 12W - Ø 13 UDA 155 C (class F) W - Ø 13 GDH - GDV 180 C (class H) MOULDING AND BOBBIN ARE MADE BY 100% VIRGIN MATERIAL. Max. allowable pressure (PS) bar Ambient temperature: with coil class F - 10 C + 60 C with coil class H - 10 C + 80 C Special item-not standard Gaskets Temperature Medium B=NBR (nitrile rubber) - 10 C + 90 C Air, inert gas, water V=FKM (fluoroelastomer) - 10 C +0 C Mineral oils (2 E),gasoline gas oil For seals other than NBR replace the letter B with the ones corresponding to the other seals. E.I. 21EN5K0V180. Max viscosity Ø Pressure Kv Power ANSI/ASME Code min M.O.P.D. BI..1 cst E l/mn (watt) bar AC bar DC bar /4 NPT 21EN5KB ~ , Note Available on request and with minimum quantities. The ODE reserves the right to carry out technical and aesthetic modifications without prior notification (Internal technical data sheet) ODE 21EN5KB180
8 MATERIALS: Body Armature tube Stainless steel AISI series 300 Fixed core Stainless steel AISI series 400 Plunger Stainless steel AISI series 400 Phase displacement ring Copper - Cu 99,9% Spring Stainless steel AISI series 300 Seal Standard: B=NBR On request: V=FKM Orifice On request: Connector Pg 9 or Pg 11 Connector conformity ISO 4400 FEATURES: Electrical conformity IEC 335 Protection degree IP 65 EN (DIN 40050) with coil fitted by connector. SPARE PARTS: 1. Coil: See coils list 2. Complete plunger: Code /R Complet cover with armature tube without gasket: Code R Gasket O-Ring: Code R990105/B 5. Complete diaphragm: Code R4512/B MAINTENANCE KIT: KTGEN2K0B10=2+4+5 DIMENSIONS: Type A B C 21EN5KB180 3/4 NPT COIL TYPE POWER ABSORPTION W Hold Inrush VA ~ VA ~ DIMENSIONS D E F B 8, U G EN5KB180 (Internal technical data sheet) ODE
contents of this product guide
contents of this product guide ODE ANGLE SEAT - 2/2 Way N.C. 21IA4 to 21IA9 - Stainless Steel 01-02 ODE SOLENOID - 2/2 Way N.C. 21A2K/21A3K - Direct Acting 03-04 21A5K/21AK - Direct Acting 05-06 21JN1R0
Servo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
Type EV224B. Servo-operated 2/2-way solenoid valves for high pressure air. Data sheet
Data sheet Servo-operated 2/2-way solenoid valves for high air Type EV224B EV224B for compressed air, is a high indirect servo-operated 2/2-way solenoid valve with working up to 40 bar, medium temperature
Servo-operated 2/2-way solenoid valves for high pressure
Data sheet Servo-operated 2/2-way solenoid valves for high Type EV224B EV224B for compressed air, is a high indirect servo-operated 2/2-way solenoid valve with working up to 40 bar, medium temperature
SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1
SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1 NC 2/2 Series 220 FEATURES Small compact d valves particularly designed for hot water and steam, compatible with the seal materials
MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
Servo piston operated 2/2-way solenoid valves for steam Type EV245B
Data sheet Servo piston operated 2/2-way solenoid valves for steam EV245B EV245B is a servo piston operated 2/2-way solenoid valve for use in steam applications. The servo piston operated design with PTFE
Data sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472
Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on
Assisted lift operated 2/2-way solenoid valves Type EV250B
Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to
Solenoid valve Types EV220B 15 - EV220B 50
Solenoid valve Types EV220B 15 - EV220B 50 EV220B 15 EV220B 50 is a universal indirect servo-opera ted 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless
Solenoid valves, 2/2-way servo-operated type EV220B 6-22
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves, 2/2-way servo-operated type EV220B 6-22 EV220B 6-22 is a direct servo-operated 2/2-way solenoid valve program with connections from 1/4 to 1. This
Servo-operated 2/2-way solenoid valves for steam Type EV225B
Data sheet Servo-operated 2/2-way solenoid valves for steam EV225B EV225B is a servo-operated 2/2-way solenoid valve for use in steam applications. The design is based on a PTFE diaphragm concept, ensuring
Solenoid valve Types EV220B 15 - EV220B 50
Data sheet Solenoid valve Types EV220B 15 - EV220B 50 EV220B 15 EV220B 50 is a universal indirect servo-opera ted 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and
Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B
Data sheet Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B EV222B is an indirect servo-operated solenoid valve programme for use in connection with contaminated or aggressive
High Pressure Valves
High Pressure Valves Available from BetaValve.com 01494 459 511 Sales@betavalve.com Park House Business Centre, Desborough Park Road, High Wycombe Bucks HP12 3DJ Series 119 Solenoid valve 2 way normally
2/2-way assisted lift operated solenoid valve type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet 2/2-way assisted lift operated solenoid valve type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve
MINIATURE SOLENOID VALVES diaphragm mechanism, fl uid isolation threaded connections M5-1/8
EATURES Solenoid valves for medical analysers, biotechnology and chemical industry Any application where the fl uid may not come into contact with the electromagnetic control section of the solenoid valves
Solenoid valves 2/2-way servo operated type EV220B 15 50
MAKING MODERN LIVING POSSIBLE Datasheet Solenoid valves 2/2-way servo operated type EV220B 15 50 EV220B 15 50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass,
Solenoid System KNURLED NUT TOP CORE GUIDE TUBE PLUNGER
EVI 7 S8 Solenoid System COIL The EVI7 S8 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of
Solenoid System FLANGE MOUNTING VERSION
EVI 9S Solenoid System COIL The EVI 9S system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 8
Indirect servo-operated 2/2-way solenoid valves Type EV220W 10 - EV220W 50, NBR and EPDM versions
Data sheet Indirect servo-operated 2/2-way solenoid valves Type EV220W 10 - EV220W 50, NBR and EPDM versions EV220W is a range of compact indirect servo- operated 2/2 way solenoid valves with connections
15 mm Pilot Valve. More technical specifications are reported in the following pages. 1
15 mm Pilot Valve The 15 mm pilot valve has been designed and developped by Amisco as a logical evolution of the traditional product range manufactured for the pneumatic market. The 15 mm solenoid valve
MAKING MODERN LIVING POSSIBLE. Solenoid valves, 2/2-way assisted lift operated type EV251B Technical brochure
MAKING MODERN LIVING POSSIBLE Solenoid valves, 2/2-way assisted lift operated type EV251B 10-22 Technical brochure Technical brochure Solenoid valves 2/2 way assisted lift operated, type EV251B 10-22 Contents
Data sheet. Solenoid valves 2/2-way direct-operated Type EV210B. February 2002 DKACV.PD.200.A B1504
Data sheet Solenoid valves 2/2-way direct-operated Type EV210B February 2002 DKACV.PD.200.A5.02 520B1504 closed Type EV210B NC for neutral liquids and gases DN 1.5-25 B - G1 Features Technical data 1 )
EVI 5 S13 Solenoid System
EVI 5 S13 Solenoid System The EVI5 S13 system by AMISCO includes a wide range of solenoid operators designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter of 13
MINI-SOLENOID VALVES direct operated subbase mounted, CNOMO (15 mm width) connector size 15
MINI-SOLENOID VALVES direct operated subbase mounted, CNOMO ( mm width) connector size / Series 0 FEATURES Low consumption (0,W) Compact, monobloc solenoid pilot valve with spade-plug connector type AMP,8x0,
POWER PULSE VALVES integral pilot (external exhaust) threaded or Quick Mount connection 3/4 to 1 1/2
POWER PULSE VALVES integral pilot (external exhaust) threaded or Quick Mount connection 3/4 to 1 1/2 NC 2/2 Series 353 X003GB2009/R8 EATURES The piston cartridge pulse valves are especially designed for
PF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
DIRECT OPERATED SOLENOID PILOT VALVES Product Index
DIRECT OPERATED SOLENOID PILOT VALVES Product Index ports/positions Function pipe connections * - instant fittings O.D. (mm) w - internal thread (ØG) x - external thread (ØG) n - pad mount : - pad mount,
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 1507-18 mm - pad mounting body M1 connection x/ - 5/ - 5/ Series 50 ISO 1507- (18 mm) FEATURES M1 connection with electrical
SOLENOID VALVES direct operated core disc 1/4
SOLENOI VLVES direct operated core disc /4 N U NO / Series 4 FETURES ompact valve intended for single-acting actuator control Epoxy moulded coil for general service applications oils interchangeable without
Solenoid valves for water supply and steam inlet Types EV220T, EV220W, EV220B, EV225B, and AV210
Data sheet Solenoid valves for water supply and steam inlet Types EV220T, EV220W, EV220B, EV225B, and AV210 Valve range for water supply and steam inlet for water fluid controls: aundry Dishwashing Main
SOLENOID VALVES FOR REFRIGERATING SYSTEMS
SOLENOID VALVES 17 SOLENOID VALVES FOR REFRIGERATING SYSTEMS APPLICATIONS The solenoid valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive
SOLENOID VALVES no voltage release (tamperproof) manual reset construction 1/4
SOLENOID VALVES no voltage release (tamperproof) manual reset construction 1/4 U 2 1 3 3/2 Series 327 FEATURES The valves are certified according to IEC 61508 Functional Safety data and have SIL-3 capability
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Assisted lift operated 2/2-way solenoid valves Type EV251B
Data sheet Assisted lift operated 2/2-way solenoid valves Type EV251B EV251B with assisted lift is especially suitable for applications such as closed systems with low and fluctuating pressure conditions
4 qwer. Main Pulse Valves Dust Collector 2/2 SERIES H OME PAGE P RINT. High Flow. Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT.
4 qwer High Flow Main Pulse Valves Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT NC 2/2 SERIES Features Specially designed for reverse jet-type dust collector systems. High flow Cv s to 140 for effective
MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D to 9.5 mm
MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D..65 to 9.5 mm U / Series 84 FEATURES Solenoid valve suitable for cutting off the flow of a fluid by pinch For sterile, aseptic, physiological
3 Way/2 Position Valves
Way/ Position Valves Three way valves have three pipe connections and two orifices. When one orifice is open, the other is closed, and vice versa. They are commonly used to alternately apply pressure to
4 qwer 2/2. Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 qwer Pilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Wide range of pressure ratings, sizes, and resilient materials provide
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT Valve program for small and medium flows: VDHT 3/8 E 2/2 VDHT 1/2 E 2/2 VDHT 3/8 EA 2/2 VDHT 1/2 EA 2/2 Valve program
Solenoid valves 2/2-way servo-operated Type EV220B 15-50
Solenoid valves /-way servo-operated Type EVB 5-5 Features EVB NC and NO For robust industrial application For water, steam, oil, compressed air and gases Flow range for water:. to 6 m³/h Differential
GENERAL CATALOGUE SOLENOID VALVES
www.ode.it GENERAL CATALOGUE SOLENOID VALVES HOW TO READ THE CATALOGUE In order to identify more easily the product of your interest, we have developed two different indices that will help you in the
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
PF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
SOLENOID VALVES direct operated core disc 1/4
SOLENOI VLVES direct operated core disc / N U NO / Series 70 FETURES Three-way solenoid valves with orifice and pipe connections in valve body enabling convenient installation ompact valve intended for
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
Type Modular Water Valve System servo-assisted; variable and extendable. 2/2 way; DN mm; 1 up to 7 bar Advantages / Benefits
2/2 way; DN 10-13 mm; 1 up to 7 bar Advantages / Benefits Reduction of Cost of Ownership up to 60% Modular system design Block assembly by lock technology Easy change between distributing and collecting
SOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2
SOLENOI VLVES no voltage release (lever type) manual reset construction 1/4 to 1/2 U 1 3 2 3/2 Series 307 FETURES Lever type Manual Reset function which means that the valve has to be energized as well
CABINET MOUNTING. 501 series
CABINET MOUNTING 50 series FEATURES The new 50 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function)
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, NAMUR, / 0 0 /-/ Série FEATURES The monostable spool valves have TÜV certified IEC 608 Functional
GENERAL CATALOGUE SOLENOID VALVES
www.ode.it GENERAL CATALOGUE SOLENOID VALVES HOW TO READ THE CATALOGUE In order to identify more easily the product of your interest, we have developed two different indices that will help you in the
2/2-way and 3/2-way Normally Closed (NC) and Normally Open (NO)
Series CFB solenoid valves /-way and 3/-way Normally Closed (NC) and Normally Open (NO)»» Solenoid valves for air and water»» Great reliability over time, even in heavy working conditions The valve function
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 NC 0 0 / Series 55 FEATURES The monostable spool valves have TÜV certified IEC 6508
Servooperated. 2/2-way solenoid valves EV220A. The Home of Control & Automation in Ireland
Servooperated 2/2-way solenoid valves The Home of Control & Automation in Ireland MAKING MODERN LIVING POSSIBLE Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way
CABINET MOUNTING. 501 series. Aluminium or stainless steel AISI 316L
CABINET MOUNTING 501 series FEATURES The 501 range has an adaptation plate for direct mounting on a cabinet side or bottom walls. These adaptation plates are available in aluminium or stainless steel AISI
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
SOLENOID VALVES FOR REFRIGERATING SYSTEMS
SOLENOID VALVES 17 SOLENOID VALVES FO EFIGEATING SYSTEMS APPLICATIONS The solenoid valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive 97/23/EC,
SOLENOID VALVES pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1
SONOI VVS pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1 TURS Rugged forged brass bodied solenoid valves (mono- or bistable function) designed to provide maximum flow Solenoid
PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G 3/4 - G1. Pressure. Pressure Maximum For DC Voltage. Flow Coeffient. Maximum. For AC Voltage. L/m.
PULSE SOLENOID VALVES EPV 100 PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G 3/4 - G1 TECHNICAL SPECIFICATIONS and FEATURES ergized valve goes open position and pressurized air goes by in a while. This causes
/2. Hot Water and Steam Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT ^ % )
888-87-6711 Normally Closed or Normally Open ot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT Features ot water service to 210 psi differential @ 210 F; sevice to 125 psi differential
Solenoid Valves. Product Information. It s all at Albion
Solenoid Valves Product Information It s all at Albion General Information SLP 2/2 WAY SOLENOID VALVE SERIES A:Product Applications. SLP 2/2 way series solenoid valves are commonly used actuators in automation
STAINLESS STEEL ATEX 2/2 SOLENOID VALVE SPU225-X NF
MAIN CHARACTERISTICS The SPU 225-X is a pilot operated ATEX 2/2 solenoid valve in stainless steel. It s intented for the shut-off the networks of agressive fluids no charged in hazardous explosives atmospheres,
Features PNEUMAT IC VALVES. Pneumatic valves Vip - Pneumatic coaxial valve GENERAL FEATURES CONTROL MEDIA OPERATING MEDIA
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SPOOL VALVES pilot or air operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 4 2 5 4 2 5 4 2 5 4 2 5 5/2 Series 55 FEATURES The monostable spool valves have TÜV certified
Motorised Valve Range
Motorised Valve Range Contents Motorised Valves... 2 Fail Safe Motorised Valves for Bio Diesel and Bio Fuels... 2 Fail Safe Motorised Valves... 3 Motor-Open Motor-Close... 6 Electro-Thermal Links... 9
Solenoid valves 2/2-way direct-operated Type EV210B
Solenoid valves /way directoperated Type EVB Features EVB NC For robust industrial application, such as control and dosage. For water, oil, compressed air and similar neutral media. Differential pressure:
Solenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
SOLENOID VALVES pilot operated, high flow floating diaphragms 3/8 to 1
SOLNOI VLVS pilot operated, high flow floating diaphragms 3/8 to 1 N 3/2 P Series NO 316 TURS rass bodied high flow valves with two floating diaphragms for larger single actuators The solenoid valves vent
2-Way/2 Position Valves
4 2-Way/2 Position Valves Two-way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. Two Types of Operations Apply Normally Closed (NC) Fluid is shut off when
SOLENOID VALVES 1. GENERAL PURPOSE VALVES ACCESSORIES ORDER CODIFICATION : TEC22 DIRECT ACTING INDIRECT ACTING
S 1. GENERAL PURPOSE VALVES DIRECT ACTING ACCESSORIES CONNECTORS FOR COILS (Protection class IP65) by DIN 43650 ADJUSTABLE TIMER to preset DUTY CYCLE A "TEST" button is provided and 2 leds are used to
SOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2
SOLENOI VLVES no voltage release (lever type) manual reset construction 1/4 to 1/2 U 1 3 2 3/2 Series 307 FETURES Lever type Manual Reset function which means that the valve has to be energized as well
Solenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
Direct-acting 2/2-way plunger valve
Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding
Solenoid valves for drinking water Types EV220BW and EV228BW
Data sheet Solenoid valves for drinking water Types EV220BW and EV228BW Solenoid valve range with drinking water approvals For water supply Houses and large apartments - Kitchen and bathrooms Commercial
Discrete direct acting 3 port solenoid valve (general purpose valve) AG31/AG41 Series. Universal type Port size: Rc1/8, Rc1/4, Rc3/8
G3141 Series iscrete direct acting 3 port solenoid valve (general purpose valve) G31/G41 Series Universal type Port size: Rc1/8, Rc1/4, Rc3/8 JIS symbol G31/41: Universal type COM NO NC Common specifications
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
600/700 SERIES FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS
FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium (anodised)
3/2-5/2 ports / positions
Series SOLENOID SPOOL VALVES G / THREADED PORTS with CNOMO pilots /-/ ports / positions SPECIFICATIONS FLUID : or neutral gas, filtered, lubricated or not PORTS : G/ PRESSURE : to 0 bar TEMPERATURE RANGE
SOLENOID VALVES no voltage release (lever type) manual reset construction 3/8 to 1
SOLNOI VLVS no voltage release (lever type) manual reset construction 3/8 to N NO 3 2 3/2 Series 308 TURS Lever type Manual Reset function which means that the valve has to be energized as well as manually
Solenoid coil Types BB, BE, BF, BG, and BN
Data sheet Solenoid coil Types BB, BE, BF, BG, and BN The coils are specially designed to operate in the aggressive environment of high humidity and temperature fluctuations that you find in most refrigeration
COILS, CONNECTORS, SOLENOID VALVES
COILS, CONNECTORS, SOLENOID VALVES 117 10 mm solenoids Solenoid valve 10 mm 00.441.0 Tension 24V DC ±10% Temperature range -5 C...+60 C (23 F... 140 F) Power 0.5... 1 W Operating pressure 0... 7 bar (0...
General purpose direct acting 2, 3 port solenoid valve
eneral purpose direct acting, 3 port solenoid valve (eneral purpose valve) eneral purpose Direct acting, 3 port solenoid valve / Pilot operated/pilot kick type port solenoid valve P/D/PK/DK Page 9 9 P/
NO (normally closed) type Common supply type (port C pressurization) MPa MPa MPa C C
Direct acting port solenoid valve, manifold and actuator (general purpose valve) NO (normally closed) type Common supply type (port C pressurization) Manifold circuit structure Common specifications B
MINIATURE SOLENOID GENERAL SERVICE VALVES
MINIATURE SOLENOID GENERAL SERVICE VALVES SERIES The Series solenoid valves are designed for use with air and inert gases Highly customizable construction that is suitable for a wide variety of gas applications
400 SERIES MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS
MANIFOLD MOUNT VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium
SOGEAC SOLENOID VALVE NASS MAGNET: SYSTEM 8. s.r.l.
With pleasure we introduce on the Italian market SYSTEM 8, produced NASS MAGNET of solenoid valve that thanks to their modularity give the possibility of a wide range of easy solutions. The solenoid valve
10 MM MINIATURE VALVES
1 MM MINIATURE VALVES LATCHING 1 MM MINIATURE VALVES Clippard s Latching series features a careful balance of forces through the precise placement of a permanent magnet in the valve core produces a bi-stable
SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot
SPOOL VALVES operated / to / tapped body and NAMUR for integrated pilot ATEX /-/ Series - FEATURES The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter
S21 Series. - 1" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 1" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 Electrical Standard Housing: Encapsulated Waterproof Conduit
2/2 ) % ) % ) Assemblies. Solenoid and Piloted Piston Valve Series Condensate Drain Valve Assemblies. Brass or Stainless Steel Bodies 1/4" to 1" NPT
4 Solenoid and Piloted Piston Series Condensate Drain Brass or Stainless Steel Bodies 1/4" to 1" NPT 2/2 Features Designed to automatically drain condensate in compressed air systems Piloted piston assemblies
Solenoid System. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex na II 3 GD T4 or T5).
EVI 7 S9 Solenoid System The EVI7 S9 system by AMISCO includes a wide range of solenoids, coils and operators, designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter
Solenoid valves 3/2-way direct-operated Type EV310A
Solenoid valves /-way direct-operated Type EV10A Features EV10A NC and NO Very compact valves for industrial application, such as control. For water, oil, compressed air and similar neutral media. Ambient
Maximum Line Resistance vs. Length of Wire Max. Loop Resistance. Max. Wire Run 18AWG 7x26 Stranded (ft)
. W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased
Nugget 40, V08 series
Nugget 0, V0 series Integrally ported 5/ and 5/3 Spool valves Solenoid actuated and pilot operated Ø, Ø mm or High flow from mm body width Wide range of voltages available Low profile fixed length manifolds
Control & Power, Inc
Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder