2-Way/2 Position Valves

Size: px
Start display at page:

Download "2-Way/2 Position Valves"

Transcription

1 4 2-Way/2 Position Valves Two-way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. Two Types of Operations Apply Normally Closed (NC) Fluid is shut off when the coil is de-energized, flows through the valve when the coil is energized. Normally Open (NO) Fluid flows through the valve when the coil is de-energized, shuts off when the coil is energized. Two Types of Constructions Apply Direct Acting When the solenoid is energized, the core directly opens the orifice of a Normally Closed valve or closes the orifice in a Normally Open valve. The valve will operate at pressures from 0 psi to its rated maximum. The force needed to open the valve is proportional to the orifice size and fluid pressure. As orifice size increases, so does the required force. To open larger orifices without increasing solenoid size, internal pilots are used. Internally Piloted These valves use line pressure to assist operation. When the coil is de-energized (on a Normally Closed valve), the pilot orifice is closed and line pressure is applied to the top of the piston or diaphragm through the bleed orifice, closing the valve. When the coil is energized, the core opens the pilot orifice, relieving pressure from the diaphragm or piston. Line pressure, alone, opens the valve by lifting the diaphragm or piston off the main orifice. See Engineering Section for further details. Standard and Optional Features Solenoid valves are supplied, as listed, with either RedHat II molded epoxy solenoids or RedHat solenoids with metal enclosures. RedHat II valves are identified by the letter G or H in their catalog numbers ; e.g., 8030G06. Many optional features may be added to your valves; e.g., high-temperature Class H molded coils, manual operators, and metering devices. See the Optional Features Section for details. 2-Way/2 Position Valves Flow Diagrams Normally Closed Valve De-Energized Normally Closed Valve Energized Normally Open Valve De-Energized Normally Open Valve Energized Index Series General Description Pipe (NPT) Page 8030 Low Pressure 3/8" - 3/4" /825 Aluminum Body /8" - 3" General Service 3/8" - 2 /2" 822 Slow Closing 3/8" - 2 /2" High Pressure /4" - 3/4" Subminiature /8" Plastic Body /4" - 3/8" /8263 NC General Service /8" - 3/8" NO General Service /8" - /4" 35

2 4 TM Because Time Matters... ASCO Today delivers the great products you need, when you need them. You save time and money. Just place your order by 3:00 P.M. EST and ASCO ships today. Guaranteed same day shipment or ASCO pays the freight ASCO Today includes our most popular valves, valve rebuild kits, and accessories Over 2000 of ASCO's most popular products qualify for ASCO Today's guarantee Solenoid Valves Miniature Valves Valve Monitoring Systems Pressure Switches As part of our continued drive for customer service, we expanded the ASCO Today program with over 40,000 products that can be shipped within five business days. Products may vary in Canada, please call to check availability of specific catalog numbers. Because Performance Matters ASCO is Committed to Technology, Leadership, and Service. For more information on how you can have the ASCO products you want when you want them, visit us online to see our complete listing of ASCO Today products or call ASCO Today is registered in the United States.

3 4 Direct Acting Low Pressure Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 3/4" NPT 8030 Features Operate at low pressures: no minimum required; up to 5 psi ( bar) maximum differential Normally closed or normally open operation Widely used for dispensing, collating, gas shutoff, vacuum holding, and tank draining applications Normally open valve well suited for venting systems % ^ # ) Construction Solenoid Enclosures Valve Parts in Contact with Fluids Body Brass 304 Stainless Steel Seals and Disc Core Tube Core and Plugnut Core Spring Standard: Watertight, Types, 2, 3, 3S, 4, and 4X (all except 6.8 watt). Metal Type General Purpose housing with 7/8" hole for /2" conduit hub (6.8 watt) Optional: Explosionproof and Watertight, Types 3, 3S, 4, 4X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number.) Note: Wattages 6. and 20. meet Type 7 Groups A, B, C, and D; and Type 9 Groups E and F only. See Optional Features Section for other available options. NBR 305 Stainless Steel 430F Stainless Steel 302 Stainless Steel Shading Coil Copper Silver Stem Electrical Standard Coil and Class of Insulation Watt Rating and Power Consumption PA (Normally Open) Spare Coil Part Number AC General Purpose Explosionproof DC VA VA Watts Watts Holding Inrush AC DC AC DC F F F F F F Standard Voltages: 24, 20, 240, 480 volts AC, 60 Hz (or 0, 220 volts AC, 50 Hz), 6, 2, 24, 20, 240 volts DC. Must be specified when ordering. Other voltages available when required. NC NO Nominal Ambient Temp. Ranges AC: 32 F to 25 F (0 C to 52 C) DC: 32 F to 04 F (0 C to 40 C) Refer to Engineering Section for details. Approvals CSA certified. UL listed, as indicated. FM approved (Normally closed only except 8030G07 and 8030G067). Meets applicable CE directives. Refer to Engineering Section for details. 8030R2 3

4 Specifications (English units) Pipe Orifice Cv Flow Factor Operating Pressure Differential (psi) Max. AC Min. Gas Water NORMALLY CLOSED (Closed when de-energized) Max. DC Max. Fluid Temp. F Brass Body Stainless Steel Body Watt Rating/ Class of Coil Insulation Catalog UL ➁ Catalog UL ➁ Gas Water AC DC Number Ref. Listing Number Ref. Listing AC DC 3/8 3/ G G064 6./F 0.6/F 3/8 3/ G G /F.6/F /2 7/ G G /F - /2 7/ A A /F /2 7/ G G067 6./F - 3/4 3/ G /F.6/F 3/4 3/ G /F - 3/4 5/ G /F - NORMALLY OPEN (Open when de-energized) 3/8 3/ G /F - /2 7/ G /F - /2 3/ G /F - 3/4 3/ G /F - On all 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. 2 = Safety Shutoff Valve; = General Purpose Valve. Refer to Engineering Section (Approvals) for details. Specifications (Metric units) Pipe Orifice (mm) Kv Flow Factor (m3/h) Operating Pressure Differential (bar) Max. AC Min. Gas Water NORMALLY CLOSED (Closed when de-energized) Max. DC Max. Fluid Temp. C Brass Body Stainless Steel Body Watt Rating/ Class of Coil Insulation Catalog UL ➁ Catalog UL ➁ Gas Water AC DC Number Ref. Listing Number Ref. Listing AC DC 3/ G G064 6./F 0.6/F 3/ G G /F.6/F / G G /F - / A A /F / G G067 6./F - 3/ G /F.6/F 3/ G /F - 3/ G /F - NORMALLY OPEN (Open when de-energized) 3/ G /F - / G /F - / G /F - 3/ G /F - On all 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. 2 = Safety Shutoff Valve; = General Purpose Valve. Refer to Engineering Section (Approvals) for details R2

5 Dimensions: inches (mm) Ref. H K L P W ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm IMPORTANT: Valves may be mounted in any position, except for 8030G003 DC, which must be mounted with the solenoid vertical and upright. Ref., 2, 3 Ref. 7, R2 5

6 Dimensions: inches (mm) Ref. 9, 0 Ref., 2, R2

7 4 Direct Acting or Piloted Aluminum Body Solenoid Valves /8" to 3" NPT Features Lightweight, low-cost valves for air service Ideal for low pressure applications Provides high flow, Cv up to 38 (Kv 8) Air and vacuum service Construction Body Seals, Diaphragms, Disc Disc-Holder Core Guide Core Tube Rider Rings Core and Plugnut Springs* Shading Coil Solenoid Enclosures Valve Parts in Contact with Fluids Aluminum NBR PA (0. and.6 watt Normally Open only) Standard: RedHat II - Watertight, Types, 2, 3, 3S, 4, and 4X; RedHat - Type I. Optional: RedHat II - Explosionproof and Watertight, Types 3, 3S, 4, 4X, 6, 6P, 7, and 9; RedHat - Explosionproof and Raintight, Types 3, 7, and 9. (Except EF825A40 and EF825A90, which are suitable for Types 3 and 7 (C and D) only and have a T2B temperature rating code.) To order, add prefix EF to catalog number. See Optional Features Section for other available options. CA 305 Stainless Steel PTFE 430F Stainless Steel 302 Stainless Steel Copper * For 8040H006, 8040H007, 8040H008, spring material is 7-7 PH Electrical Standard Coil and Class of Insulation Watt Rating and Power Consumption Spare Coil Part No. AC General Purpose Explosionproof DC Watts Watts VA Holding VA Inrush AC DC AC DC F F B F F Standard Voltages: 24, 20, 240, 480 volts AC, 60 Hz (or 0, 220 volts AC, 50 Hz), 6, 2, 24, 20, 240 volts DC. Must be specified when ordering. Other voltages available when required. (Note: 24 volt AC, 60 Hz not available with 28.2 watt coil) Nominal Ambient Temp. Ranges Series AC RedHat II/RedHat RedHat II RedHat -40 F to 25 F (-40 C to 52 C) F to 25 F (0 C to 52 C) Refer to Engineering Section for details. 32 F to 04 F (0 C to 40 C) DC 32 F to 77 F (0 C to 25 C) (04 F/40 C occasionally) 8040_825R2 % ^ # ) 8040 Approvals: CSA certified to: 8040 Series: ) Standard C22.2 No. 39 "Electrically Operated Valves," File ) Automatic Gas Valves Z2.2 (6.5), File ) Automatic Gas Safety Shutoff Valves C/I (3.9), File Series Normally Closed: ) Standard C22.2 No. 39 "Electrically Operated Valves," File ) Automatic Gas Valves Z2.2 (6.5), File Series Normally Open: ) Standard C22.2 No. 39 "Electrically Operated Valves," File 038. UL listed, as indicated. FM approved (Normally Closed only, except Catalog Numbers 825A090 and 825A040). RedHat II meets applicable CE directives. Refer to Engineering Section for details. 7 NC NO

8 Specifications (English units) Pipe Orifice Cv Flow Factor Gas Capacity Btu/hr ➅ Min. NORMALLY CLOSED (Closed when de-energized) Operating Pressure Differential (psi) Max. AC Air-Fuel Gas Max. DC Max. Fluid Temp. F Aluminum Body Ref. Watt Rating/ Class of Coil Insulation ➁ Air-Fuel UL ➄ Gas AC DC Catalog Number AC DC Listing AC DC /8 5/6.0 53, H006 6./F - /4 5/6. 59, H007 6./F - 3/8 5/6.2 64, H008 6./F - 3/8 3/ , G /F.6/F 3/8 3/ G00 ➀ 6./F.6/F /2 3/ , G022 3A 0./F - /2 3/ , G /F.6/F /2 3/ G002 ➀ 6./F.6/F 3/4 3/ , G023 3B 0./F - 3/4 3/ , G /F.6/F 3/4 3/ G003 ➀ 3 6./F.6/F 5/8 2,9, B050 ➂ /F 4.9/B /4 5/8 32,730, B060 ➂ /F 4.9/B /2 5/8 35,900, B070 ➂ /F 4.9/B 2 2 3/ ,25, B080 ➂ /F 4.9/B 2 / ,82, A090 ➆ /F ,430, A040 ➆ /F - NORMALLY OPEN (Open when de-energized) 3/8 3/ , G /F.6/F /2 3/ , G /F.6/F 3/4 3/ , G /F.6/F 5/8 22,9, C /F 4.9/B /4 5/8 33,793, C /F 4.9/B /2 5/8 37,988, C /F 4.9/B 2 2 3/ ,00, C /F 4.9/B 2 / ,290, B093 ➃➆ /F - ➀ Do not use for Fuel Gas. ➁ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. ➂ FM Approved Process Control Valves. See Engineering Section (Approvals) for details. ➃ Type I enclosure only. ➄ = Safety Shutoff Valve; = General Purpose Valve. Refer to Engineering Section (Approvals) for details. ➅ " W.C. 2" W.C. Inlet Pressure,,000 Btu/cu.ft. or more, 0.64 Specific Gravity Gas. ➆ Not available with 24 volt, 60 Hz coil _825R2

9 Specifications (Metric units) Pipe Orifice (mm) Kv Flow Factor (m3/h) Gas Capacity Btu/hr ➅ Min. NORMALLY CLOSED (Closed when de-energized) Operating Pressure Differential (bar) Max. AC Air-Fuel Gas Max. DC Max. Fluid Temp. C Aluminum Body Ref. Watt Rating/ Class of Coil Insulation ➁ Air-Fuel UL ➄ Gas AC DC Catalog Number AC DC Listing AC DC / , H006 6./F - / , H007 6./F - 3/ , H008 6./F - 3/ , G /F.6/F 3/ G00 ➀ 6./F.6/F / , G022 3A 0./F - / , G /F.6/F / G002 ➀ 6./F.6/F 3/ , G023 3B 0./F - 3/ , G /F.6/F 3/ G003 ➀ 3 6./F.6/F 4 8,9, B050 ➂ /F 4.9/B /4 4 27,730, B060 ➂ /F 4.9/B /2 4 30,900, B070 ➂ /F 4.9/B ,25, B080 ➂ /F 4.9/B 2 / ,82, A090 ➆ /F ,430, A040 ➆ /F - NORMALLY OPEN (Open when de-energized) 3/ , G /F.6/F / , G /F.6/F 3/ , G /F.6/F 4 9,9, C /F 4.9/B /4 4 28,793, C /F 4.9/B /2 4 32,988, C /F 4.9/B ,00, C /F 4.9/B 2 / ,290, B093 ➃➆ /F - ➀ Do not use for Fuel Gas. ➁ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. ➂ FM Approved Process Control Valves. See Engineering Section (Approvals) for details. ➃ Type enclosure only. ➄ = Safety Shutoff Valve; = General Purpose Valve. Refer to Engineering Section (Approvals) for details. ➅ " W.C. 2" W.C. Inlet Pressure,,000 Btu/cu.ft. or more, 0.64 Specific Gravity Gas. ➆ Not available with 24 volt, 60 Hz coil. 8040_825R2 9

10 Dimensions: inches (mm) Ref. H K L P W ins mm ins mm ins mm ins mm ➀ ins mm ➀ ins mm ➀ ins mm ins mm ins mm ins mm ins mm ins mm A ins mm B ins mm ➁ ins mm ➁ ins mm ins mm ins mm ins mm ins mm ins mm IMPORTANT: Valves may be mounted in any position except all DC constructions and those marked ➀, which must be mounted with the solenoid vertical and upright. Constructions marked ➁ must be mounted with the solenoid vertical and upright or horizontal only. NPT BOTH ENDS 2 CORED HOLES.350 [8.9] DEEP FOR TH D FORMING SCREW.800 [20.3] IN BOTTOM VIEW OF BODY NPT BOTH ENDS NPT BOTH ENDS L FLOW.60 [5].406 [0.3] Ref. -4, 9, 0, 3A, 3B L L FLOW.66 [42] NPT BOTH ENDS R.088 [R 2.2] 4 PLACES Ref. L FLOW P H K P H.90 [23].250 [6.4].5 [2.9] 2 PLACES.750 [9.] Ref. 2-5, 8-20 K P H 2 MOUNTING HOLES Ø.28 [Ø 7.] Ref. 6, 7, 8, 6, 7 H P K W W /2 NPT /2 NPT W.97 [25] Ø.88 [Ø 22] HOLE FOR /2 CONDUIT CONN. 7/8 DIA HOLE FOR /2 CONDUIT CONN. FLOW W _825R2

11 4 Pilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 /2" NPT 820 Features Wide range of pressure ratings, sizes, and resilient materials provide long service life and low internal leakage High Flow Valves for liquid, corrosive, and air/inert gas service Industrial applications include: - Car wash - Laundry equipment - Air compressors - Industrial water control - Pumps ^ % ) Construction Valve Parts in Contact with Fluids Body Brass 304 Stainless Steel Seals and Discs NBR or PTFE Disc-Holder PA Core Tube 305 Stainless Steel Core and Plugnut 430F Stainless Steel Springs 302 Stainless Steel Shading Coil Copper Silver NC NO Electrical Standard Coil and Class of Insulation DC Watts Watt Rating and Power Consumption Watts Solenoid Enclosures Spare Coil Part Number AC General Purpose Explosionproof VA Holding VA Inrush AC DC AC DC F F F F F F H H Standard Voltages: 24, 20, 240, 480 volts AC, 60 Hz (or 0, 220 volts AC, 50 Hz). 6, 2, 24, 20, 240 volts DC. Must be specified when ordering. Other voltages available when required. Standard: RedHat II - Watertight, Types, 2, 3, 3S, 4, and 4X; RedHat - Type I. Optional: RedHat II - Explosionproof and Watertight, Types 3, 3S, 4, 4X, 6, 6P, 7, and 9; Red-Hat - Explosionproof and Watertight, Types 3, 4, 4X, 7, and 9. (To order, add prefix EF to catalog number, except Catalog Numbers 820B057, 820B058, and 820B059, which are not available with Explosionproof enclosures.) See Optional Features Section for other available options. 820R2 Nominal Ambient Temp. Ranges RedHat II/ RedHat AC: 32 F to 25 F (0 C to 52 C) RedHat II DC: 32 F to 04 F (0 C to 40 C) RedHat DC: 32 F to 77 F (0 C to 25 C) (04 F/40 C occasionally) Refer to Engineering Section for details. Approvals UL listed as indicated. CSA certified. RedHat II meets applicable CE directives. Refer to Engineering Section for details.

12 820 4 Specifications (English units) Pipe Orifice Cv Flow Factor Min. Gas Operating Pressure Differential (psi) Max. AC Water Light 300 SSU Gas NORMALLY CLOSED (Closed when de-energized), NBR or PTFE ➁ Seating Max. DC Water Light 300 SSU AC DC Max. Fluid Temp. F Brass Body Stainless Steel Body Catalog Number Ref. ➃ UL ➄ Listing Catalog Number Ref. ➃ Watt Rating/ Class of Coil Insulation ➆ UL ➄ Listing AC DC 3/8 3/8.5 ➀ G073 ➂ P 820G036 ➂ P 6./F.6/F 3/8 5/ G093 5D /F.6/F 3/8 5/ G00 6D /F.6/F 3/8 5/ G006 5D /F - /2 7/6 2.2 ➀ G05 ➂ 2P 820G037 ➂ 2P 6./F.6/F /2 5/ G094 5D /F.6/F /2 5/ G087 7D 7./F.6/F /2 5/ G002 6D /F.6/F /2 5/ G007 5D /F - /2 3/ G227 5D /F 40.6/H 3/4 5/ G088 7D 7./F.6/F 3/4 3/ G009 9D /F.6/F 3/4 3/ G095 8D /F.6/F 3/4 3/ G003 D /F.6/F 3/4 3/ B026 ➁ 0P /H 3/4 3/ G026 ➁ 40P F B054 3D - 820D089 5D /H G054 4D 820G089 45D 6./F G004 2D /F.6/F G027 42P /F G078 ➁ 3P /F - /4 / B055 32D /H /4 / G055 43D /F - /4 / G008 6D /F.6/F /2 / B056 33D /H /2 / G056 44D /F - /2 / G022 8D /F.6/F 2 3/ G00 20P /F.6/F 2 /2 3/ G0 2P /F.6/F NORMALLY OPEN (Open when de-energized), NBR Seating (PA Disc-Holder, except as noted) 3/8 5/ G033 23D /F.6/F 3/8 5/ G0 ➇ ➈ 39D /F.6/F /2 5/ G034 23D /F.6/F /2 5/ G030 37D 0./F.6/F /2 5/ G02 ➇ ➈ 39D /F.6/F 3/4 3/ G035 25D /F.6/F 3/4 5/ G038 38D 0./F.6/F 3/4 3/ C03 24D /F 3/4 3/ G03 46D /F B057 ➅ ➉ 34D /F D04 26D /F G04 47D /F - /4 / B058 ➅ ➉ 35D /F - /4 / D08 28D /F /4 / G08 48D /F - /2 / B059 ➅ ➉ 36D /F - /2 / D032 29D /F /2 / G032 49D /F - 2 3/ P /F 2 3/ G03 50P /F - 2 /2 3/ P /F 2 /2 3/ G04 5P - 6./F - ➀ 5 psi on Air; psi on Water. ➁ Valve provided with PTFE main disc. ➂ Valve includes UItem (G.E. trademark) piston. ➃ Letter D denotes diaphragm construction; P denotes piston construction. ➄ Safety Shutoff Valve; General Purpose Valve. Refer to Engineering Section (Approvals) for details. ➅ Valves not available with Explosionproof enclosures. ➆ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. ➇ AC construction also has PA seating. ➈ No disc-holder. ➉ Stainless steel disc-holder. Must have solenoid mounted vertical and upright R2

13 4 820 Specifications (Metric units) Pipe Orifice (mm) Kv Flow Factor (m3/h) Min. Gas Operating Pressure Differential (bar) Max. AC Water Light 300 SSU Gas Max. DC Water Light 300 SSU AC DC Max. Fluid Temp. C Brass Body Stainless Steel Body Catalog Number Ref. ➃ UL ➄ Listing Catalog Number Ref. ➃ Watt Rating/ Class of Coil Insulation ➆ UL ➄ Listing AC DC NORMALLY CLOSED (Closed when de-energized), NBR or PTFE ➁ Seating 3/8 0.3 ➀ G073 ➂ P 820G036 ➂ P 6./F.6/F 3/ G093 5D /F.6/F 3/ G00 6D /F.6/F 3/ G006 5D /F - /2.9 ➀ G05 ➂ 2P 820G037 ➂ 2P 6./F.6/F / G094 5D /F.6/F / G087 7D 7./F.6/F / G002 6D /F.6/F / G007 5D /F - / G227 5D /F 40.6H 3/ G088 7D 7./F.6/F 3/ G009 9D /F.6/F 3/ G095 8D /F.6/F 3/ G003 D /F.6/F 3/ B026 ➁ 0P /H 3/ G026 ➁ 40P F B054 3D - 820D089 5D /H G054 4D 820G089 45D 6./F G004 2D /F.6/F G027 42P /F G078 ➁ 3P /F - / B055 32D /H / G055 43D /F - / G008 6D /F.6/F / B056 33D /H / G056 44D /F - / G022 8D /F.6/F G00 20P /F.6/F 2 / G0 2P /F.6/F NORMALLY OPEN (Open when de-energized), NBR Seating (PA Disc-Holder, except as noted) 3/ G033 23D /F.6/F 3/ G0 ➇ ➈ 39D /F.6/F / G034 23D /F.6/F / G030 37D 0./F.6/F / G02 ➇ ➈ 39D /F.6/F 3/ G035 25D /F.6/F 3/ G038 38D 0./F.6/F 3/ C03 24D /F 3/ G03 46D /F B057 ➅ ➉ 34D /F D04 26D /F G04 47D /F - / B058 ➅ ➉ 35D /F - / D08 28D /F / G08 48D /F - / B059 ➅ ➉ 36D /F - / D032 29D /F / G032 49D /F P /F G03 50P /F - 2 / P /F 2 / G04 5P /F - ➀ 0.3 bar on Air; 0.0 bar on Water. ➁ Valve provided with PTFE main disc. ➂ Valve includes UItem (G.E. trademark) piston. ➃ Letter D denotes diaphragm construction; P denotes piston construction. ➄ Safety Shutoff Valve; General Purpose Valve. Refer to Engineering Section (Approvals) for details. ➅ Valves not available with Explosionproof enclosures. ➆ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. ➇ AC construction also has PA seating. ➈ No disc-holder. ➉ Stainless steel disc-holder. Must have solenoid mounted vertical and upright. 820R2 3

14 820 4 Dimensions: inches (mm) Ref. H K L P W * ins mm * ins mm ins mm * ins mm ins mm ins mm * ins mm * ins X mm 33 X * ins mm ins mm ins mm * ins X mm 36 X ins mm ins mm * ins mm * ins mm ins mm ins X mm 29 X ins mm ins X mm 66 X ins X mm 209 X ins X mm 66 X ins X mm 79 X 29 2 * DC dimensions slightly larger. IMPORTANT: Valves may be mounted in any position, except as noted in specifications table. H P NPT BOTH ENDS L FLOW L FLOW K Ref., 2 W Ref. 3 /2 NPT Ø.266 [6.8] R.2 [3.2] 4 PLACES.88 [22].59 [5] BOTTOM VIEW SHOWING MOUNTING BRACKET HOLES (OPTIONAL) Ref. 5-9,, 20, 2, 23, 25, 37,38 P K W /2 NPT.69 [8].86 [22] H NPT BOTH ENDS P K H.656 [42].28 [7.] DIA 2 MOUNTING HOLES NPT BOTH ENDS OPTIONAL MOUNTING BRACKET L FLOW W.625 [4.3] 4 820R2

15 4 820 Dimensions: inches (mm) Ref. H K L P W 30 ins X mm 209 X Ref. 0, 5, 24, ins X mm 33 X /8 DIA. HOLE FOR /2 CONDUIT CONN ins X mm 45 X ins X mm 54 X K P H 34 ins. 6.9 X mm 76 X ins X mm 86 X ins X mm.95 X L FLOW NPT BOTH ENDS W.625 [4.3] 37 ins mm [42].28 [7.] DIA. 2 MOUNTING HOLES 38 ins mm ins mm OPTIONAL MOUNTING BRACKET 40 ins mm ins mm ins mm Ref. 2, 6, 8 43 ins mm /2 NPT 44 ins mm ins mm ins mm H P K 47 ins mm IN 48 ins mm NPT BOTH ENDS ins mm ins mm ins mm W L FLOW IMPORTANT: Valves may be mounted in any position, except as noted in specifications table. 820R2 5

16 820 4 Dimensions: inches (mm) Ref. 39 H /2 NPT P K L FLOW NPT BOTH ENDS W.28 [7.] DIA. 2 MOUNTING HOLES.66 [42] SHOWING MOUNTING BRACKET ONLY Ref /2 NPT P H.656 [42].28 [7.] DIA. 2 MOUNTING HOLES K NPT BOTH ENDS OPTIONAL MOUNTING BRACKET L FLOW W.625 [4.32] 6 820R2

17 4 Pilot Operated Slow Closing Solenoid Valves Brass Body 3/8" to 2 /2" NPT 822 Features Pilot operated, normally open or normally closed Snubber slows disc closing speed to protect system against water hammer damage more effectively than other techniques Pressure spike due to water hammer is reduced to a point eliminating the need for suppressors or other controls in most water systems Fluid Controls Institute Inc. evaluations have classified these valves: Pipe s FCI-82- Class 3/8", /2", 3/4" CC ", /4", /2", 2", 2 /2" BB % ^ ) Construction Body Disc Seals Core Tube Core and Plugnut Springs Piston Shading Coil Valve Parts in Contact with Fluids Brass NBR PTFE & NBR 305 Stainless Steel 430F Stainless Steel 302 Stainless Steel Stainless Steel or Brass Copper NC NO Electrical Standard Coil and Class of Insulation DC Watts Watt Rating and Power Consumption Watts Solenoid Enclosures Spare Coil Part No. AC General Purpose Explosionproof VA Holding VA Inrush AC DC AC DC F F F Standard Voltages: 24, 20, 240, 480 volts AC, 60 Hz (or 0, 220 volts AC, 50 Hz). 6, 2, 24, 20, 240 volts DC. Must be specified when ordering. Other voltages are available when required. Standard: RedHat II - Watertight, Types, 2, 3, 3S, 4, and 4X; RedHat - Type I. Optional: RedHat II - Explosionproof and Watertight, Types 3, 3S, 4, 4X, 6, 6P, 7, and 9; RedHat - Explosionproof and Raintight, Types 3, 7, and 9. (To order, add prefix EF to catalog number.) See Optional Features Section for other available options. 822R2 Nominal Ambient Temp. Ranges: RedHat II/ RedHat AC: 32 F to 25 F (0 C to 52 C) RedHat II DC: 32 F to 04 F (0 C to 40 C) RedHat DC: 32 F to 77 F (0 C to 25 C) (04 F/40 C occasionally) Refer to Engineering Section for details. Approvals: CSA certified. UL listed, General Purpose Valves. RedHat II meets applicable CE directives. Refer to Engineering Section for details. 7

18 822 4 Specifications (English units) Pipe Orifice Cv Flow Factor Min. ➀ NORMALLY CLOSED (Closed when de-energized) Operating Pressure Differential (psi) Watt Rating/ Max. Fluid Class of Coil Max. AC Max. DC Temp. F Brass Body Insulation ➂ Water ➁ Water ➁ AC DC Catalog Number Ref. AC DC 3/8 9/ G00 6./F.6/F /2 9/ G003 6./F.6/F 3/4 3/ G /F.6/F G /F.6/F /4 / G /F.6/F /2 / G0 7 6./F.6/F 2 3/ G03 6./F 22.6/F 2 /2 3/ G /F 22.6/F NORMALLY OPEN (Open when de-energized) 3/8 9/ /F 3/8 9/ G /F - /2 9/ /F /2 9/ G /F - 3/4 3/ /F 3/4 3/ G /F /F G /F - /4 / /F /4 / G /F - /2 / /F /2 / G /F - 2 3/ /F 2 3/ G /F - 2 /2 3/ /F 2 /2 3/ G /F ➀ Valves require a 5 psi Minimum Pressure Differential to open. Once open, they remain open with 3 psi differential pressure. ➁ Refer to Steam/Hot Water Valve Series for Hot Water constructions. ➂ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts R2

19 4 822 Specifications (Metric units) Pipe Orifice (mm) Kv Flow Factor (m3/h) Min. ➀ NORMALLY CLOSED (Closed when de-energized) Operating Pressure Differential (bar) Watt Rating/ Max. Fluid Class of Coil Max. AC Max. DC Temp. C Brass Body Insulation ➂ Water ➁ Water ➁ AC DC Catalog Number Ref. AC DC 3/ G00 6./F.6/F / G003 6./F.6/F 3/ G /F.6/F G /F.6/F / G /F.6/F / G0 7 6./F.6/F G03 6./F 22.6/F 2 / G /F 22.6/F NORMALLY OPEN (Open when de-energized) 3/ /F 3/ G /F - / /F / G /F - 3/ /F 3/ G /F /F G /F - / /F / G /F - / /F / G /F /F G /F - 2 / /F 2 / G /F - ➀ Valves require a 0.3 bar Minimum Pressure Differential to open. Once open, they remain open with 0.2 bar differential pressure. ➁ Refer to Steam/Hot Water Valve Series for Hot Water constructions. ➂ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. 822R2 9

20 822 4 Dimensions: inches (mm) Ref. H K L P W ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm IMPORTANT: Valves may be mounted in any position. Ref., 2 Ref. 3, 4 Ref. 5, 6 Re. 7,, 2 /2 NPT P K H L W Ref. 8, 9, 0, 3, 4 Ref. 5, 6 Ref R2

21 ANSI Accredited Program PRODUCT CERTIFICATION 4 Direct Acting Subminiature Solenoid Valves /8" and /4" NPT 8256 Features 2-way normally closed operation Compact design Brass and 36 stainless steel body constructions Mountable in any position Available with manual operator NSF 6 and 69 version available for potable water and food service % ) Construction Valve Parts in Contact with Fluids General Purpose NSF Body Brass 36 Stainless Steel 36 Stainless Steel Core Tube/Bonnet S.S. / Plated Steel S.S. / S.S. S.S. / S.S. Core and Plugnut Stainless Steel Springs Stainless Steel Seals and Disc FKM EPDM Shading Coil Copper Silver NC 2 Electrical Watt Rating and Power Consumption Standard Coil and AC Class of DC VA VA Ambient Spare Coil Family Prefix Insulation Watts Watts Holding Inrush Temp. F AC DC U F to SC F to Standard voltages: 24,20, 240 volts AC, Hz. 2, 24, 20 volts DC Must be specified when ordering. 2 Solenoid Enclosures Standard: Open frame (Prefix U) 8" leads Optional: DIN (size mm, form B) (Prefix SC). Watertight/IP-65 when used with DIN connector kit for SC coils (see kits below). Kits /2" NPT conduit hub kit for leaded coils * (Kit contains 0 pcs of each: threaded hub, gasket, and attaching screw.) DIN connector kit for SC coils * (Kit contains 0 pcs of each: connector, gasket, and attaching screw.) Mounting adapter kit (Kit contains 2 screws and plate.) Approvals UL recognized coil - File MH2873 CSA recognized coil - see CSA certificate No Meets applicable CE directives NSF 6 - Drinking water system components NSF 69 - Special purpose food Equipment and Devices The NSF Certification Program is accredited by the Standards Council of Canada and ANSI. 8256_NSFR

22 Specifications (English Units) Pipe Orifice Cv Flow Factor Air - Inert Gas General Service - Normally Closed Operating Pressure Differential (psi) Max. Max. AC Max. DC Fluid Temp. F Wattage Light Oil Air - Inert Light Oil 300 SSU Gas 300 SSU AC DC Brass Stainless Steel Ref. AC DC /8 3/ U8256A00V U8256A03V /8 / U8256A002V U8256A04V /8 3/ U8256A004V U8256A06V /8 7/ U8256B045V U8256B046V NSF 6 and 69 Listed /8 3/ U8256A03E /8 7/ U8256A04E /4 3/ U8256A07E /4 7/ U8256A08E MS option limits max. pressures to 220 psi (unless limited by operating pressure). Approx. Shipping Weight (lbs.) Specifications (Metric Units) Pipe Orifice (mm) Kv Flow Factor (m3/h) Air - Inert Gas General Service - Normally Closed Operating Pressure Differential (bar) Max. Max. AC Max. DC Fluid Temp. C Wattage Light Oil Air - Inert Light Oil 300 SSU Gas 300 SSU AC DC Brass Stainless Steel Ref. AC DC / U8256A00V U8256A03V / U8256A002V U8256A04V / U8256A004V U8256A06V / U8256B045V U8256B046V NSF 6 and 69 Listed / U8256A03E / U8256A04E / U8256A07E / U8256A08E MS option limits max. pressures to 5 bar (unless limited by operating pressure). Approx. Shipping Weight (kgs.) _NSFR

23 Capabilities Chart Solenoid Options ➁ Base Catalog Number Resilient Materials Other Standard Rebuild Kit NEMA Type 3-9 High Temp. DIN Wiring Box Screw Terminal Multipin DIN Spade Open Frame with Leads Brass Stainless Steel SC - U8256A00V U8256A03V E - NV MS SC - U8256A002V U8256A04V E - NV MS SC - U8256A004V U8256A06V E - NV MS SC - U8256B045V U8256B046V E - NV MS SC - - U8256A03E MS SC - - U8256A04E MS SC - - U8256A07E MS SC - - U8256A08E MS = Standard. Replace V suffix. ➁ Replace U prefix with SC prefix. FKM EPDM RUBY Oxygen Service PTFE Urethane Vacuum Manual Operator Mounting Bracket Brass AC/DC Stainless AC/DC Dimensions: inches (mm) Ref. A B C D E ins mm ins mm ins mm Shown with DIN coil without connector.47 (2).65 (6).43 ().86 (22) A B M3 - THROUGH HOLES 2 E /8 NPT (NSF /8, /4 NPT) C D.59 (5).7 (8) 8256_NSFR 3

24 4 Direct Acting Plastic Body Solenoid Valves Hose Bib, Compression Connection or /4" Male Flare 8260 Features Corrosion-resistant plastic bodies Available with compression fitting ends for metal or plastic tube to save installation cost Mountable in any position Dispensing vending construction NSF listed % & ) Construction Body Seals and Disc Core Tube Core and Plugnut Springs Shading Coil Valve Parts in Contact with Fluids CA, PA, PP NBR 305 Stainless Steel 430F Stainless Steel 302 Stainless Steel Copper NC Electrical Spare Coil Part Watt Rating and Power Consumption Number Standard Coil and AC General Purpose Class of VA Insulation DC Watts Watts Holding VA Inrush AC DC B F Standard Voltages: 24, 20, 240, 480 volts AC, 60 Hz (or 0, 220 volts AC, 50 Hz). 6, 2, 24, 20, 240 volts DC. Must be specified when ordering. Other voltages available when required. Solenoid Enclosures Standard: Watertight, Types, 2, 3, 3S, 4, and 4X. Optional: Open Frame Solenoid, Junction Box enclosures. See Optional Features Section for descriptions on these options. Nominal Ambient Temp. Range: AC: 32 F to 25 F (0 C to 52 C) DC: 32 F to 04 F (0 C to 40 C) Refer to Engineering Section for details. Approvals: CSA certified. UL Recognized Component. Meets applicable CE directives. Refer to Engineering Section for details. 8260R 27

25 Specifications (English units) Pipe Connections Orifice Cv Flow Factor Gas Operating Pressure Differential (psi) Max. AC Water GENERAL SERVICE CONSTRUCTION - CA Body, Watertight enclosure with leads Max. DC Max. Fluid Temp. F Gas Water AC DC Catalog Number Plastic Body Watt Rating/ Class of Coil Insulation ➁ Ref. AC DC /4" Male Flare 9/ G042 6./F 0.6/F Bib for /4" I.D. Tube 9/ G /F 0.6/F /4" O.D. ➀ Compression 9/ G /F 0.6/F GENERAL SERVICE CONSTRUCTION - PP Body, Open Frame Solenoid and Spade Terminal Coils /4" O.D. ➀ Compression / USM /B 6.4/B 3/ USM /B 6.4/B / USM /B 6.4/B 5/ USM /B 6.4/B DISPENSING VENDING CONSTRUCTION - NSF Listed - PP Body, Open Frame Solenoid and Spade Terminal Coils /4" O.D. ➀ Compression PA Body, Open Frame Solenoid and Spade Terminal Coils / USM /B 6.4/B 3/ USM /B 6.4/B / USM /B 6.4/B 5/ USM /B 6.4/B 3/8" O.D. ➀ Compression 5/ USM /B - ➀ Fittings not supplied with valve. To order, refer to Kit No plastic tubing, and Kit No metal tubing. ➁ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts. Specifications (Metric units) Pipe Connections Orifice (mm) Kv Flow Factor (m3/h) Gas Operating Pressure Differential (bar) Max. AC Water GENERAL SERVICE CONSTRUCTION - CA Body, Watertight enclosure with leads Max. DC Max. Fluid Temp. C Plastic Body Gas Water AC DC Catalog Number Watt Rating/ Class of Coil Insulation ➁ Constr. Ref. AC DC /4" Male Flare G042 6./F 0.6/F Bib for /4" I.D. Tube G /F 0.6/F /4" O.D. ➀ Compression G /F 0.6/F GENERAL SERVICE CONSTRUCTION - PP Body, Open Frame Solenoid and Spade Terminal Coils /4" O.D. ➀ Compression USM /B 6.4/B USM /B 6.4/B USM /B 6.4/B USM /B 6.4/B DISPENSING VENDING CONSTRUCTION - NSF Listed - PP Body, Open Frame Solenoid and Spade Terminal Coils /4" O.D. ➀ Compression PA Body, Open Frame Solenoid and Spade Terminal Coils USM /B 6.4/B USM /B 6.4/B USM /B 6.4/B USM /B 6.4/B 3/8" O.D. ➀ Compression USM /B - ➀ Fittings not supplied with valve. To order, refer to Kit No plastic tubing, and Kit No metal tubing. ➁ On 50 hertz service, the watt rating for the 6./F solenoid is 8. watts R

26 Dimensions: inches (mm) Ref. Ref. 2 Ref R 29

27 Dimensions: inches (mm) Ref. 4.3 (3.33) 0.8 (20.6) 0.3 (9.5) 4 WIDE x 2 THICK TERMINALS 0.98 (25.0).97 (50.0) 0.33 (8.3).43 (3.6) DIA. HOLES x 0.3 (7.9) DEEP, (2) MOUNTING HOLES UNF 2A THREAD (BOTH ENDS) IC.666 (6.9).5 (38.).88 (47.6).28 (32.5) (NOTE ).333 (8.4).200 (5.0).475 (2.).70 (4.3) DIA. HOLE (2 PLACES) FLOW (25.4) 2 (50.8) A. C. CONSTRUCTION SHOWN 0.4 (0.3) (REF) (.) HEXAGON (BOTH ENDS) 6 ORIFICE SIZE SHOWN 0.03 (0.79).5 (29.4) 0.9 (22.2) Ref. 5.3 (3.33) 0.8 (20.6) 0.3 (9.5) (6) (0.8) 4 WIDE x 2 THICK TERMINALS 0.98 (25.0).97 (50.0) 0.33 (8.3).43 (3.6) DIA. HOLES x 0.3 (7.9) DEEP, (2) MOUNTING HOLES UNF 2A THREAD (BOTH ENDS).5 (38.).88 (47.6).28 (32.5) (NOTE ) IC.666 (6.9).333 (8.4).200 (5.0).475 (2.).70 (4.3) DIA. HOLE (2 PLACES) 0.4 (0.3) (REF) 0.03 (0.79) 0.9 (22.2) FLOW (25.4) 2 (50.8) A. C. CONSTRUCTION SHOWN (.) HEXAGON (BOTH ENDS) 6 ORIFICE SIZE SHOWN.5 (29.4) Ref. 6.3 (33.3) (20.6) (9.53) (6) (0.8) 4 WIDE x 2 THICK TERMINALS (8.3).326. (27.8) 0.44 (.) (5.) 9 32 (7.5) (76) (7.5) BODY SHOWN ONLY (8.7) 32 (Ø 8.7) FLOW 2.43 (62).2 (30.7) (6) UN-2A THREAD (BOTH ENDS) (25.4) 2 (5) 2 MOUNTING HOLES /32 DEEP, FOR NO. 0 THREADS CUTTING SCREW R

28 4 Direct Acting, Normally Closed General Service Solenoid Valves Brass or Stainless Steel Bodies /8" to 3/8" NPT Features Welded core tube provides higher pressure ratings Reliable, proven design with high flows Small poppet valves for tight shutoff Wide range of elastomers for specialty service applications Mountable in any position Tapped mounting holes in body standard Construction Valve Parts in Contact with Fluids Body Brass Cast 304 Stainless Steel Seals and Discs NBR or Cast UR Core Tube 305 Stainless Steel Core and Plugnut 430F Stainless Steel Springs 302 Stainless Steel Shading Coil Copper Silver Electrical DC Watts Watt Rating and Power Consumption Spare Coil Part No. AC General Purpose Explosionproof VA Watts Holding VA Inrush AC DC AC DC * * Standard Voltages: 24, 20, 240, 480 volts AC, 60 Hz (or 0, 220 volts AC, 50 Hz). 6, 2, 24, 20, 240 volts DC. Must be specified when ordering. Other voltages available when required. *On 50 hertz service, the rating for the 6./F solenoid is 8. watts, and the rating for the 9./F solenoid is. watts. Solenoid Enclosures Standard: Watertight, Types, 2, 3, 3S, 4, and 4X. Optional: Explosionproof and Watertight, Types 3, 3S, 4, 4X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number) See Optional Features Section for other available options. Options Mounting bracket (suffix MB) Quarter-turn manual operator with screw slot (suffix MS) Panel mount (prefix GP for conduit; consult ASCO for other electrical connections) Vacuum service (suffix VVM, VVH; see Vacuum Section for more details.) Oxygen service (suffix N) Silicone Free (suffix SF) Elastomers: Viton (suffix V), Ethylene Propylene (suffix E), Neoprene (suffix J), Teflon (suffix T), Low Temp NBR (suffix A) Note: For suffix A, Fluid temp. range -40 F to 67 F only for valves with 0., 7.,.6, and 22.6 watt coils. Refer to Engineering Section for fluid and temperature compatibility. % ^ # ) NC Nominal Ambient Temp. Ranges The nominal limitation of 32 F (0 C) is advisable for any valve that might contain moisture (water vapor). AC: -3 F to 3 F (-25 C to 55 C) DC: -3 F to 04 F (-25 C to 40 C) -3 F to 3 F (-25 C to 55 C) Note: Max ambient for explosionproof (EF) is 25 F (52 C) for AC, 3 F (55 C) for DC. Optional: For AC, the max. ambient temperature is 40 F (60 C) with Class H coil (with or without prefix EF) Refer to Engineering Section for details. Approvals CSA certified. UL listed, as indicated. Safety Shutoff Valves FM approved. Meets applicable CE directives. Refer to Engineering Section for details. 3

29 Specifications (English units) Operating Pressure Differential (psi) Catalog Number Watt Rating/ Max. Fluid Class of Coil Pipe Orifice Cv Max. AC@3 F Max. DC@04 F Max. DC@3 F Temp. F Insulation size Flow Factor Gas Water Lt. 300ssu Gas Water Lt. 300ssu Gas Water Lt. Oil 300ssu AC DC Brass Stainless Steel Ref. UL Listing AC DC NORMALLY CLOSED (Closed when de-energized), NBR Disc /8 3/ H75 0./F - /8 3/ H /H /8 3/ H /H /8 3/ H /F 8.6/H /8 3/ H /F 0.6/H /8 3/ H /F - /8 3/ H099-0./F.6/H /8 3/ H H /F 0.6/H /8 3/ H H78 7./F 22.6/H /8 3/ H77 -.6/H /8 3/ H0-2 9./F 8.6/H /8 3/ H H /F 0.6/H /8 / H H74 7./F 22.6/H /8 / H79 0./F - /8 / H /F 8.6/H /8 / H H /F 0.6/H /4 3/ H /F.6/H /4 3/ H /F.6/H /4 3/ H /F 22.6/H /4 3/ H /H /4 3/ H H /F 0.6/H /4 3/ H H /F 0.6/H /4 3/ H H /F 22.6/H /4 3/ H H /F.6/H /4 3/ H /F 8.6/H /4 3/ H H /F 0.6/H /4 / H0 8262H /F 22.6/H /4 / H /F.6/H /4 / H /F - /4 / H /F 8.6/H /4 / H H /F 0.6/H /4 5/ H2 8262H /F 22.6/H /4 5/ H /F.6/H /4 5/ H /F - /4 5/ H3-4 9./F 8.6/H /4 5/ H 8262H /F 0.6/H /4 7/ H4 8262H /F 22.6/H /4 7/ H /F.6/H /4 7/ H /F - /4 7/ H H /F 0.6/H /4 9/ H H /F 22.6/H /4 9/ H /F.6/H /4 9/ H /F - /4 9/ H H /F 0.6/H 3/8 / H5 8263H9 5 7./F 22.6/H 3/8 / H /F.6/H 3/8 / H /F - 3/8 / H /F 8.6/H 3/8 / H H /F 0.6/H 3/8 5/ H8 8263H /F 22.6/H 3/8 5/ H /F.6/H 3/8 5/ H /F - 3/8 5/ H7-6 9./F 8.6/H 3/8 5/ H6 8263H /F 0.6/H 3/8 7/ H H /F 22.6/H 3/8 7/ H /F.6/H 3/8 7/ H /F - 3/8 7/ H9 8263H /F 0.6/H 3/8 9/ H H /F 22.6/H 3/8 9/ H H /F - 3/8 9/ H H /F 0.6/H 32 Cast UR disc supplied as standard, limits min. ambient temp. to 32 F (0 C); = General Purpose Valve, = Safety Shutoff Valve

30 Specifications (Metric units) Operating Pressure Differential (bar) Catalog Number Watt Rating/ Kv Max. Fluid Class of Coil Pipe Orifice Flow Max. C Max. C Max. C Temp. C Insulation size Factor Lt. Lt. Lt. Oil Stainless UL (mm) (m 3 /h) Gas Water 300ssu Gas Water 300ssu Gas Water 300ssu AC DC Brass Steel Ref. Listing AC DC NORMALLY CLOSED (Closed when de-energized), NBR Disc / H75 0./F - / H /H / H /H / H /F 8.6/H / H /F 0.6/H / H /F - / H099-0./F.6/H / H H /F 0.6/H / H H78 7./F 22.6/H / H77 -.6/H / H0-2 9./F 8.6/H / H H /F 0.6/H / H H74 7./F 22.6/H / H79 0./F - / H /F 8.6/H / H H /F 0.6/H / H /F.6/H / H /F.6/H / H /F 22.6/H / H /H / H H /F 0.6/H / H H /F 0.6/H / H H /F 22.6/H / H H /F.6/H / H /F 8.6/H / H H /F 0.6/H / H0 8262H /F 22.6/H / H /F.6/H / H /F - / H /F 8.6/H / H H /F 0.6/H / H2 8262H /F 22.6/H / H /F.6/H / H /F - / H3-4 9./F 8.6/H / H 8262H /F 0.6/H / H4 8262H /F 22.6/H / H /F.6/H / H /F - / H H /F 0.6/H / H H /F 22.6/H / H /F.6/H / H /F - / H H /F 0.6/H 3/ H5 8263H9 5 7./F 22.6/H 3/ H /F.6/H 3/ H /F - 3/ H /F 8.6/H 3/ H H /F 0.6/H 3/ H8 8263H /F 22.6/H 3/ H /F.6/H 3/ H /F - 3/ H7-6 9./F 8.6/H 3/ H6 8263H /F 0.6/H 3/ H H /F 22.6/H 3/ H /F.6/H 3/ H /F - 3/ H9 8263H /F 0.6/H 3/ H H /F 22.6/H 3/ H H /F - 3/ H H /F 0.6/H Cast UR disc supplied as standard, limits min. ambient temp. to 32 F (0 C); = General Purpose Valve, = Safety Shutoff Valve 33

31 Dimensions: inches (mm) Ref. H K L P W ins mm ins mm ins mm ins mm ins mm ins mm Ref. -6 W P H K ANPT PIPE THREAD (2 PLACES) L Mounting Dimensions Ref., 2 (/8" Pipe) Ref. 3, 4 (/4" Pipe) Ref. 5, 6 (3/8" Pipe).30 [8].59 [5] MOUNTING HOLES.34 [9].87 [22.2] MOUNTING HOLES.57 [4].75 [9] MOUNTING HOLES.69 [8] FLOW MOUNTING HOLES M5 THREAD.25 [6.4] MIN.FULL THREAD DEPTH. 2 HOLES FOR MOUNTING.87 [22.2] MOUNTING HOLES FLOW M5 THREAD.30 [7.6] MIN.FULL THREAD DEPTH 2 HOLES FOR MOUNTING.8 [20.6] MOUNTING HOLES FLOW M5 THREAD.24 [6] MIN. FULL THREAD DEPTH 2 HOLES FOR MOUNTING Note: Mounting holes will accept a standard #0-32 machine screw. 34

32 4 Direct Acting, Normally Open General Service Solenoid Valves Brass or Stainless Steel Bodies /8" to /4" NPT 8262 Features Reliable, proven design with high flows Small poppet valves for tight shutoff Wide range of elastomers for specialty service Mountable in any position Brass and stainless steel constructions % ^ ) Construction Valve Parts in Contact with Fluids Body Brass 303/304 Stainless Steel Seals and Discs Core Tube Core and Plugnut Springs NBR or Cast UR 305 Stainless Steel 430F Stainless Steel 302 Stainless Steel Shading Coil Copper Silver Stem CA / PA NO Electrical Standard Coil and Class of Insulation Watt Rating and Power Consumption Spare Coil Part No. AC General Purpose Explosionproof DC Watts Watts VA Holding VA Inrush AC DC AC DC F F Standard Voltages: 24, 20, 240, 480 volts AC, 60 Hz (or 0, 220 volts AC, 50 Hz). 6, 2, 24, 20, 240 volts DC. Must be specified when ordering. Other voltages available when required. Solenoid Enclosures Standard: Watertight, Types, 2, 3, 3S, 4, and 4X. Optional: Explosionproof and Watertight, Types 3, 3S, 4, 4X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number) See Optional Features Section for other available options. Nominal Ambient Temp. Ranges AC: 32 F to 25 F (0 C to 52 C) DC: 32 F to 04 F (0 C to 40 C) Refer to Engineering Section for details. Approvals CSA certified. UL listed, as indicated. Meets applicable CE directives. Refer to Engineering Section for details. 35

4 qwer 2/2. Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.

4 qwer 2/2. Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8 to 2 1/2 NPT. Features. Construction. 4 qwer Pilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Wide range of pressure ratings, sizes, and resilient materials provide

More information

3 Way/2 Position Valves

3 Way/2 Position Valves Way/ Position Valves Three way valves have three pipe connections and two orifices. When one orifice is open, the other is closed, and vice versa. They are commonly used to alternately apply pressure to

More information

2/2 ^ % ) Normally Closed or Normally Open Hot Water and Steam Valves. Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT

2/2 ^ % ) Normally Closed or Normally Open Hot Water and Steam Valves. Brass or Stainless Steel Bodies 1/8 to 2 1/2 NPT Normally Closed or Normally Open Hot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT 2/2 Features Handle the challenges of high-temperature fluids PTFE and EPDM discs, stainless steel

More information

4 qwer. Steam and Hot Water Valves 2/2 SERIES. Hot Water/ Steam. Features. Construction. Nominal Ambient Temperature Ranges: Electrical.

4 qwer. Steam and Hot Water Valves 2/2 SERIES. Hot Water/ Steam. Features. Construction. Nominal Ambient Temperature Ranges: Electrical. qwer Normally Closed or Normally Open and Hot Water Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Handle the challenges of high-temperature fluids. PTFE and EPDM discs,

More information

Proveedor Integral de Soluciones para la Industria

Proveedor Integral de Soluciones para la Industria Desde96 Proveedor Integral de Soluciones para la Industria Vías uso general ASCO cuenta con la más amplia gama de válvulas solenoides de usos generales, en,, 4, y 5 vías, para el manejo de fluidos tales

More information

% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.

% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4 NPT. Features. Construction. Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow

More information

Control & Power, Inc

Control & Power, Inc Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder

More information

/2. Hot Water and Steam Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT ^ % )

/2. Hot Water and Steam Valves Brass or Stainless Steel Bodies 1/8 to 2 1/2 NPT ^ % ) 888-87-6711 Normally Closed or Normally Open ot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT Features ot water service to 210 psi differential @ 210 F; sevice to 125 psi differential

More information

Constructions Suitable for -40 C to -50 C Ambient. 2, 3 and 4 Way Constructions Available. Brass, Aluminum and Stainless Steel Bodies

Constructions Suitable for -40 C to -50 C Ambient. 2, 3 and 4 Way Constructions Available. Brass, Aluminum and Stainless Steel Bodies Constructions Suitable for - C to -5 C Ambient, 3 and Way Constructions Available Brass, Aluminum and Stainless Steel Bodies Air and Inert Gas Service INDEX General Service Valves -Way/ Position 8 Aluminum

More information

4 qwer. Main Pulse Valves Dust Collector 2/2 SERIES H OME PAGE P RINT. High Flow. Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT.

4 qwer. Main Pulse Valves Dust Collector 2/2 SERIES H OME PAGE P RINT. High Flow. Aluminum Bodies Air and Inert Gas 3/4 to 3 NPT. 4 qwer High Flow Main Pulse Valves Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT NC 2/2 SERIES Features Specially designed for reverse jet-type dust collector systems. High flow Cv s to 140 for effective

More information

2/2 ^ % ) Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.

2/2 ^ % ) Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8 to 2 1/2 NPT. Features. Construction. 4 ilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" 8210 2-AY Features ide range of pressure ratings, sizes, and resilient materials provide long service life

More information

Proveedor Integral de Soluciones para la Industria. Desde1963

Proveedor Integral de Soluciones para la Industria. Desde1963 Proveedor Integral de Soluciones para la Industria Desde1963 4 Vías uso general ASCO cuenta con la más amplia gama de válvulas solenoides de usos generales, en 2, 3, 4, y 5 vías, para el manejo de fluidos

More information

Maximum Line Resistance vs. Length of Wire Max. Loop Resistance. Max. Wire Run 18AWG 7x26 Stranded (ft)

Maximum Line Resistance vs. Length of Wire Max. Loop Resistance. Max. Wire Run 18AWG 7x26 Stranded (ft) . W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased

More information

Constructions Suitable for -40 C to -50 C Ambient

Constructions Suitable for -40 C to -50 C Ambient Constructions Suitable for -40 C to -50 C Ambient 2, 3 and 4 Way Constructions Available Brass and Stainless Steel Bodies Air and Inert Gas Service AIR/INERT GAS QUALITY STATEMENT FOR LOW AMBIENT VALVES

More information

4 N E X T G E N E R A T I O N

4 N E X T G E N E R A T I O N N X T G N R A T I O N lectronically nhanced Solenoid Valves and Stainless Steel Bodies /" - " NPT / 3/ / SRIS Next Generation Features Increase in DC pressure ratings to AC levels on all products (up to

More information

Engineering Design, Plans, and Specifications for an Air-Assisted Filter Backwash System at the Thomas Hill Energy Center Water Treatment Plant

Engineering Design, Plans, and Specifications for an Air-Assisted Filter Backwash System at the Thomas Hill Energy Center Water Treatment Plant Engineering Design, Plans, and Specifications for an Air-Assisted Filter Backwash System at the Thomas Hill Energy Center Water Treatment Plant submitted January, 2009 H2O C Engineering 877-22-WATER www.h2oc.com

More information

2/2 ) % ) % ) Assemblies. Solenoid and Piloted Piston Valve Series Condensate Drain Valve Assemblies. Brass or Stainless Steel Bodies 1/4" to 1" NPT

2/2 ) % ) % ) Assemblies. Solenoid and Piloted Piston Valve Series Condensate Drain Valve Assemblies. Brass or Stainless Steel Bodies 1/4 to 1 NPT 4 Solenoid and Piloted Piston Series Condensate Drain Brass or Stainless Steel Bodies 1/4" to 1" NPT 2/2 Features Designed to automatically drain condensate in compressed air systems Piloted piston assemblies

More information

Low Power. 1.4 W Low Power Solenoid Valves. Brass or Stainless Steel Bodies 1/4" to 1" NPT. Features

Low Power. 1.4 W Low Power Solenoid Valves. Brass or Stainless Steel Bodies 1/4 to 1 NPT. Features .4 W Solenoid Valves Brass or Stainless Steel Bodies /4" to " NPT 4/ Features Moulded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Designed for use in automation

More information

% # ) Air and Inert Gas Intrinsically Safe Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT

% # ) Air and Inert Gas Intrinsically Safe Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4 to 1 NPT 4 Air and Inert Gas Intrinsically Safe Valves Brass, Aluminum, or Stainless Steel Bodies /4" to " NPT / 3/ 4/ 5/ 5/3 Features Intrinsically safe solenoid enclosures to provide corrosion resistance in harsh

More information

Engineering Information. Solenoid Valves Principles of Operation. Solenoid Valves. Direct Acting Valves (Figures 1A, 1B)

Engineering Information. Solenoid Valves Principles of Operation. Solenoid Valves. Direct Acting Valves (Figures 1A, 1B) 4 Engineering Information Principles of Operation A solenoid valve is a combination of two basic functional units: A solenoid (electromagnet) with its core A valve body containing one or more orifices

More information

NIFW % # ) Air and Inert Gas Non-Incendive Field Wiring Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT

NIFW % # ) Air and Inert Gas Non-Incendive Field Wiring Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4 to 1 NPT Air and Inert Gas Non-Incendive Field Wiring Valves Brass, Aluminum, or Stainless Steel Bodies /" to " NPT / 5/ 5/3 Features solenoid enclosures to provide corrosion resistance in harsh environments Designed

More information

% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT

% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4 to 1 NPT Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NT / 3/ / 5/ 5/3 Features Available in different coil terminations H Class coil construction Designed

More information

2/2 3/2 4/2 SERIES Air Operated. General Service Air Operated Valves. Brass Body 1/4" to 2" NPT. Features. Construction.

2/2 3/2 4/2 SERIES Air Operated. General Service Air Operated Valves. Brass Body 1/4 to 2 NPT. Features. Construction. General Service Valves Brass Body 1/" to 2" NPT 2/2 3/2 /2 Features Unique sealing member isolates pilot air pressure from mainline fluid Variations in pilot air pressure do not affect valve operation

More information

SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1

SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1 SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1 NC 2/2 Series 220 FEATURES Small compact d valves particularly designed for hot water and steam, compatible with the seal materials

More information

/ 3/ 4/ 5/ 5/3 4 Nominal Ambient Temp. Ranges Series Body Material Normal Temperature Range High Ambient Temp Version 8553 Stainless Steel -4 F to 4 F

/ 3/ 4/ 5/ 5/3 4 Nominal Ambient Temp. Ranges Series Body Material Normal Temperature Range High Ambient Temp Version 8553 Stainless Steel -4 F to 4 F 4.4 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NPT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased

More information

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4 to 1 NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power 4.55 Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 low wattage coil Standard ambient

More information

188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c

188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c The 188 is a 3 Way, 10 mm wide micro solenoid valve designed to be used in fluid power applications. Using air or other neutral gasses the 188 can be used to pilot other valves or cylinders. ompact manifold

More information

4 qwer. Air Operated Valves 2/2 3/2 4/2 SERIES. Air Operated. General Service. Brass or Stainless Steel Bodies 1/4" to 2" NPT. Features.

4 qwer. Air Operated Valves 2/2 3/2 4/2 SERIES. Air Operated. General Service. Brass or Stainless Steel Bodies 1/4 to 2 NPT. Features. qwer General Service Valves Brass or Stainless Steel Bodies 1/" to 2" NPT 2/2 3/2 /2 SERIES Features Unique sealing member isolates pilot air pressure from mainline fluid. Variations in pilot air pressure

More information

Data sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472

Data sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472 Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on

More information

S21 Series. - 1" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight

S21 Series. - 1 NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight S21 Series - 1" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 Electrical Standard Housing: Encapsulated Waterproof Conduit

More information

/ 3/ 4/ 5/ 5/3 4 Nominal Ambient Temp. Ranges Series Body Material Normal Temperature Range High Ambient Temp Version 8553 Stainless Steel -4 F to 4 F

/ 3/ 4/ 5/ 5/3 4 Nominal Ambient Temp. Ranges Series Body Material Normal Temperature Range High Ambient Temp Version 8553 Stainless Steel -4 F to 4 F 4.55 Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 low wattage coil Standard ambient

More information

S21 Series. - 2" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight

S21 Series. - 2 NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight S21 Series - 2" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 1/4 Electrical Standard Housing: Encapsulated Waterproof

More information

GUARANTEED SAME DAY SHIPMENT General Service - 2/2 NC 1/" Kit Coil Weight (ins.) (ins.) Flow Min. Air Water Oil Temp. F Number Material Material Volta

GUARANTEED SAME DAY SHIPMENT General Service - 2/2 NC 1/ Kit Coil Weight (ins.) (ins.) Flow Min. Air Water Oil Temp. F Number Material Material Volta GUARANTEED SAME DAY SHIPMENT Two way (2/2) general service solenoid valves have one inlet port and one outlet port. Control of air, water, light oil, non-corrosive media Normally Closed (opens when energized)

More information

High Pressure Solenoid Valves

High Pressure Solenoid Valves High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, Hydrogen & other High Pressure Gases High Pressure Cryogenics Flammable Liquids

More information

POWER PULSE VALVES integral pilot (external exhaust) threaded or Quick Mount connection 3/4 to 1 1/2

POWER PULSE VALVES integral pilot (external exhaust) threaded or Quick Mount connection 3/4 to 1 1/2 POWER PULSE VALVES integral pilot (external exhaust) threaded or Quick Mount connection 3/4 to 1 1/2 NC 2/2 Series 353 X003GB2009/R8 EATURES The piston cartridge pulse valves are especially designed for

More information

Condensate Drain Valve Assemblies

Condensate Drain Valve Assemblies 4 Condensate Drain Valve Assemblies 2-way normally closed operation Compact design Adjustable timers with status indication www.ascovalve.com 1 4 Condensate Drain Valve Assemblies Compressed air is used

More information

SERIES ASCO Valves DESCRIPTION OPERATION INSTALLATION. Positioning. Page1of5(Section1of2) I&M No.V9575R3 (Section1of2)

SERIES ASCO Valves DESCRIPTION OPERATION INSTALLATION. Positioning. Page1of5(Section1of2) I&M No.V9575R3 (Section1of2) Installation & Maintenance Instructions -- WAY DIRECT-- ACTING SOLENOID VALVES REVISION H & R NORMALLY OPEN OR NORMALLY CLOSED OPERATION BRASS OR STAINLESS STEEL CONSTRUCTION -- 1/8I, 1/4I, OR3/8I PIPE

More information

An example of an ASCO valve catalog number with prefixes and suffixes: EF HT 8210 G 002 V MO. Construction Features. Number

An example of an ASCO valve catalog number with prefixes and suffixes: EF HT 8210 G 002 V MO. Construction Features. Number 4 Optional Features How to Select and Specify Not all optional features are appropriate or available for all valves. Table 1 lists the optional electrical feature prefixes available for each RedHat II

More information

Over 2000 of today's most popular products

Over 2000 of today's most popular products Over 2000 of today's most popular products www.ascovalve.com Table of Contents General Service 2-Way Normally Closed 1-6 2-Way Normally Open 7 2-Way Slow Closing 10 3-Way Normally Closed 11-1 3-Way Normally

More information

AIR RIDE SUSPENSION SYSTEMS

AIR RIDE SUSPENSION SYSTEMS AIR RIDE SUSPENSION SYSTEMS Solenoid Valves (Fast Valves) Valve Manifold Systems Pressure Switches Filters (Water Traps) Air Bellows & Fittings www.asconumatics.com 1 ASCO Numatics Air Ride Components

More information

深圳市永旭伟业贸易有限公司 SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, 1/4.

深圳市永旭伟业贸易有限公司 SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, 1/4. SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, / / Series FEATURES The monostable spool valves, series, have TÜV certifi ed IEC 60 Functional

More information

DIRECT OPERATED SOLENOID PILOT VALVES Product Index

DIRECT OPERATED SOLENOID PILOT VALVES Product Index DIRECT OPERATED SOLENOID PILOT VALVES Product Index ports/positions Function pipe connections * - instant fittings O.D. (mm) w - internal thread (ØG) x - external thread (ØG) n - pad mount : - pad mount,

More information

Glove Box Instrumentation Specifications

Glove Box Instrumentation Specifications Glove Box Instrumentation Specifications April 11, 2006 The following is a brief list of the major technical specifications of the instrumentation for the Glove Box (GB). The spec sheets for the various

More information

Servo-operated 2/2-way solenoid valves Type EV220A

Servo-operated 2/2-way solenoid valves Type EV220A Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and

More information

Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT

Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up

More information

MINIATURE SOLENOID GENERAL SERVICE VALVES

MINIATURE SOLENOID GENERAL SERVICE VALVES MINIATURE SOLENOID GENERAL SERVICE VALVES SERIES The Series solenoid valves are designed for use with air and inert gases Highly customizable construction that is suitable for a wide variety of gas applications

More information

Series 1, 2 & 6 Options selector. Port 4 = 1/8" NPT 5 = 1/4" NPT (Series 6* only) 7 = #10-32 UNF 8 = 1/4-28 UNF

Series 1, 2 & 6 Options selector. Port 4 = 1/8 NPT 5 = 1/4 NPT (Series 6* only) 7 = #10-32 UNF 8 = 1/4-28 UNF KIP Isolation Valves Ideal for control of corrosive and aggressive media Elastomer diaphragm provides protection from aggressive, corrosive, and gritty media Isolation valves can be equipped with a low

More information

Parker Fluid Control Angle Body Valves

Parker Fluid Control Angle Body Valves Parker Fluid Control Angle Body Valves Angle Body Valve Key Features RED Position indicator on all models Housing is 304 SS standard, or optional Aluminum Piston ring FKM Brass Piston Pilot port available

More information

SOLENOID VALVES no voltage release (tamperproof) manual reset construction 1/4

SOLENOID VALVES no voltage release (tamperproof) manual reset construction 1/4 SOLENOID VALVES no voltage release (tamperproof) manual reset construction 1/4 U 2 1 3 3/2 Series 327 FEATURES The valves are certified according to IEC 61508 Functional Safety data and have SIL-3 capability

More information

Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.

Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const. NXT NRATON lectronically nhanced Solenoid Valves rass and Stainless Steel odies 1/" - 2" NPT 2/2 3/2 /2 SRS eneration eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement)

More information

General Purpose Two-Way Direct Lift and Pilot Operated Valves. Compatible Fluids

General Purpose Two-Way Direct Lift and Pilot Operated Valves. Compatible Fluids SKINNER 7000 Series General Purpose Two-Way Direct Lift and Pilot Operated Valves IN THIS SECTION : 7221, 7222, 7321, 7322, 7423 SPECIFICATIONS Mechanical Characteristics Standard Materials of Construction

More information

General Purpose Two-Way Direct Acting Valves. Electrical Characteristics

General Purpose Two-Way Direct Acting Valves. Electrical Characteristics SKINNER 7000 Series General Purpose Two-Way Direct Acting Valves IN THIS SECTION : 7121, 7122, 7123, 7129 SPECIFICATIONS Mechanical Characteristics Standard Materials of Construction Body Brass or Stainless

More information

Asia Pacific Express Catalog

Asia Pacific Express Catalog Asia Pacific Express Catalog TABLE OF CONTENTS Page 110 :... 2 210 :...3 215 :...5 220 :...6 223 :...7 238 :...8 256 :...9 262 :...10 X282 :...11 284 :...12 291 :...13 292 :...14 353 :...15 356 :...16

More information

2/2-way Solenoid Valve for liquids and gases

2/2-way Solenoid Valve for liquids and gases 2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased

More information

S40 Series. - 1/4" NPT - Stainless Steel Body - 2-Way Piloted Piston - Normally Open. Dimensions/Weight

S40 Series. - 1/4 NPT - Stainless Steel Body - 2-Way Piloted Piston - Normally Open. Dimensions/Weight S40 Series - " NT - Stainless Steel Body - 2-Way iloted iston - Materials Seals: Nitrile, Viton, Teflon, Ethylene ropylene Orifice: ilot Stainless Steel Main Stainless Steel Ø 3/8 Electrical Standard Housing:

More information

Refrigeration Solenoid Valves & 3-Way Heat Reclaim Valves

Refrigeration Solenoid Valves & 3-Way Heat Reclaim Valves aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Refrigeration Solenoid s & 3-Way Heat Reclaim s Catalog D-1, May 2010

More information

2/2. General Purpose & Watertight Enclosure Gas Vent Valves. Visual Indication & Proof of Closure (Optional) 3/8" to 2 1/2" NPT.

2/2. General Purpose & Watertight Enclosure Gas Vent Valves. Visual Indication & Proof of Closure (Optional) 3/8 to 2 1/2 NPT. 4 General urpose & atertight nclosure Gas Vent Valves Visual Indication & roof of Closure (Optional) 3/8" to 2 1/2" 2/2 8214 Features 2-way normally open operation Unique double disc design with overtravel

More information

E. Clark & Associates 10 Brent Drive Hudson, MA Tel. 978 / Fax 978 / Two Switch Output Hex Screw Adjustment

E. Clark & Associates 10 Brent Drive Hudson, MA Tel. 978 / Fax 978 / Two Switch Output Hex Screw Adjustment CLARK SOLUTIONS 400 Series, Pressure, Vacuum, Diff. Pressure & Temp. Switches 1,2 & 3 Switch output, Adjustable Ranges 30 Vac to 6000 PSI, -180 to 650 o F DESCRIPTION The 400 Series is a versatile family

More information

Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const.

Agency Air-Inert Gas Water. Approx. Shipping Weight (lbs.) 1/2 5/ P Brass. Const. NXT NRATON lectronically nhanced Solenoid Valves rass and odies 1/" - 2" NPT 2/2 3/2 /2 eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement) Lower power operation

More information

3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals.

3/8 & 1/2 NPT. with 3/8 and 1/2 NPT ports for 4 Way - 2 & 3 Position see Pg locate counterbores in body to control static squeeze on seals. 8 SERIES /8 Ported Air Valves 1/ Ported Air Valves /8 & 1/ 1, 1A, 1B & 8 Series Note! Spring return & spring centered models NOT suitable for dry air service. Features & Way - Position. Way - &. operator

More information

ACCESSORIES FOR AIR VALVES & AIR SYSTEMS

ACCESSORIES FOR AIR VALVES & AIR SYSTEMS ACCESSORIES FOR AIR VALVES & AIR SYSTEMS BULLETIN ACC-2000R AIR VALVES FOR INDUSTRY SINCE 1949 ISO 9001 CERTIFIED FOOT GUARDS Page 8 QUICK EXHAUST & ELECTRIC QUICK EXHAUST VALVES Pages 6 & 7 SHUTTLE VALVES

More information

SOLENOID CONTROL VALVE

SOLENOID CONTROL VALVE PROJECT NAME LOCATION SOLENOID CONTROL VALVE INTRODUCTION This specification covers the design, manufacture, and testing of 4 in. (100 mm) through 36 in. (900 mm) Control Valves PART 1 - GENERAL 1. Standard

More information

Valve Reference C5. Valve Reference C6. 4-Way. 4-way direct acting

Valve Reference C5. Valve Reference C6. 4-Way. 4-way direct acting Valve Reference C5.86 3.25.53 1.31 1.62 E 3.25 4.31 2.37 2.56 1.73 2.24 P 1/4 Thru Bolt Holes 4 PLC s 2.69 4-way direct acting V933xx: Normally Closed-Normally Closed v935xx: Normally Closed-Normally Open

More information

SKINNER Intrinsically Safe Series Four-Way

SKINNER Intrinsically Safe Series Four-Way SKINNER Four-Way Two-Position Valves SPECIFICATIONS Mechanical Characteristics Standard Materials of Body Aluminum Seals FKM, NBR. Other diaphragm materials available upon request. Compatible Fluids Air

More information

2/2 ^ # (200) General Purpose & Watertight Enclosure Gas Shutoff Valves. Visual Indication & Proof of Closure (Optional) 3/4" to 3" NPT

2/2 ^ # (200) General Purpose & Watertight Enclosure Gas Shutoff Valves. Visual Indication & Proof of Closure (Optional) 3/4 to 3 NPT General urpose & atertight Enclosure Gas Shutoff Valves Visual Indication & roof of Closure (Optional) 3/" to 3" 2/2 Features Unique double disc design with overtravel provides redundant sealing for leak

More information

MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D to 9.5 mm

MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D to 9.5 mm MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D..65 to 9.5 mm U / Series 84 FEATURES Solenoid valve suitable for cutting off the flow of a fluid by pinch For sterile, aseptic, physiological

More information

Solenoid Valves for General Purpose 2 Ways

Solenoid Valves for General Purpose 2 Ways 1 127 15 Solenoid Valves for General Purpose 2 Ways 2 19 19 22 2 2 159 1 Normally closed Servo-operated or hung. -4 / -5 127 Normally closed and Normally open Direct acting. - / -7 15 Normally closed and

More information

Switches for Pressure to 8000 psig, Vacuum, Differential, or Level Control with General Purpose, Watertight or Explosion-Proof Enclosures

Switches for Pressure to 8000 psig, Vacuum, Differential, or Level Control with General Purpose, Watertight or Explosion-Proof Enclosures S-SERIES Pressure Switches Switches for Pressure to 8000 psig, Vacuum, Differential, or Level Control with, or s Features: Set point repeatability, +1% of operating range. All wiring terminals, adjustments

More information

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm / or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,

More information

Direct-acting 2/2-way plunger valve

Direct-acting 2/2-way plunger valve Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding

More information

COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE

COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES 2.01 COMBINATION RESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVE PROJECT NAME LOCATION COMBINATION PRESSURE REDUCING AND SOLENOID SHUTOFF CONTROL VALVES INTRODUCTION This specification covers the design, manufacture, and testing of 1 in. (25 mm) through 36 in. (900

More information

4 Series 298 Air Operated Stainless Steel Piston Valves For Steam and Aggressive Fluid Service

4 Series 298 Air Operated Stainless Steel Piston Valves For Steam and Aggressive Fluid Service Series 98 Air Operated Steel Piston Valves For Steam and Aggressive Fluid Service Applications Rubber Vulcanization/Tire Presses Industrial Autoclaves Foundries Laundry Food & Beverage Chemical Processing

More information

Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT

Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design

More information

Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT

Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT SERIES Features Full Port Lead Free Brass Diverter Valve Spring return or double acting actuators Ball Valve direct mounted

More information

3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base

3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base 3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override

More information

MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15

MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15 MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN

More information

Gold Ring Two -Way, Three-Way and Four-Way Solenoid Valves. Catalog 7300A

Gold Ring Two -Way, Three-Way and Four-Way Solenoid Valves. Catalog 7300A Gold Ring Two -Way, Three-Way and Four-Way Solenoid Valves Catalog 7300A Table of Contents Introduction Product Overview...1 Condensed Valve Listing... 2-9 Valve Ordering Information...10-12 Gold Ring

More information

AUTOMATIC FLOW CONTROL VALVE. INSTRUCTIONS Installation - Operation - Inspection - Maintenance

AUTOMATIC FLOW CONTROL VALVE. INSTRUCTIONS Installation - Operation - Inspection - Maintenance AUTOMATIC FLOW CONTROL VALVE INSTRUCTIONS Installation - Operation - Inspection - Maintenance 4" - 36" ROSS MODEL - 42AFCV FIGURE 14A Serial #L AUTOMATIC FLOW CONTROL VALVE GLOBE FLAT SEAT STYLE ROSS VALVE

More information

How to order (see coil section for part numbering charts)

How to order (see coil section for part numbering charts) How to order (see coil section for part numbering charts) Valves using Coil Charts 1-6 (Gold Ring Series Valves) Step 1: Select the pressure vessel catalog number based on the application requirements.

More information

SOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2

SOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2 SOLENOI VLVES no voltage release (lever type) manual reset construction 1/4 to 1/2 U 1 3 2 3/2 Series 307 FETURES Lever type Manual Reset function which means that the valve has to be energized as well

More information

Installation & Maintenance Instructions

Installation & Maintenance Instructions Installation & Maintenance Instructions OPEN-- FRAME, GENERAL PURPOSE, WATERTIG/EXPLOSIONPROOF SOLENOIDS r SERIES 8016G/H (Section1of2) SERVICE NOTICE ASCOr solenoid valves with design change letter G

More information

SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot

SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot SPOOL VALVES operated / to / tapped body and NAMUR for integrated pilot ATEX /-/ Series - FEATURES The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter

More information

Condensed Catalog 2006 North America

Condensed Catalog 2006 North America MAKING MODERN LIVING POSSIBLE One call to Danfoss and you re in control Danfoss Industrial Automation gives you fast access to one of the widest ranges of quality industrial controls available. More and

More information

Assisted lift operated 2/2-way solenoid valves Type EV250B

Assisted lift operated 2/2-way solenoid valves Type EV250B Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to

More information

Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.

Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port. Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported

More information

4 Dynamic Solutions. Leadership and Innovation in Valve Products and Valve Systems

4 Dynamic Solutions. Leadership and Innovation in Valve Products and Valve Systems Dynamic Solutions Leadership and Innovation in Valve Products and Valve Systems At ASCO, Valve Performance Begins and Ends With People 4 First of all, it begins with the people we serve. It is from them

More information

Airsweep Installation & Maintenance Manual. Airsweep Models VA-06 VA-12 VA-51 SECTION THREE SOLENOID VALVES

Airsweep Installation & Maintenance Manual. Airsweep Models VA-06 VA-12 VA-51 SECTION THREE SOLENOID VALVES Airsweep Installation & Maintenance Manual Airsweep Models VA-06 VA-12 VA-51 SECTION THREE SOLENOID VALVES Model DV1251 / Conduit & DIN Connection Model DV06 / RDV / MCA / RCA Diaphragm Valves Goyen Model

More information

Optional Features. Index. Index

Optional Features. Index. Index Optional Features Standard ASCO solenoid valves will meet the needs of most applications. However, there are times when fluids must be handled at higher temperatures, in less than ideal ambient locations,

More information

Deep Well Pump Control Valve

Deep Well Pump Control Valve MODEL 61-02 661-02 Deep Well Pump Control Valve Prevent Surges in Pipelines Simple Hydraulic Operation Adjustable Opening & Closing Speeds Solenoid Control Can Be Operated Manually Proven Reliable Design

More information

1Valcor Scientific. Subminiature Teflon Valve. 2-Way, Normally Closed Solenoid Valve Model: SV20-1 APPLICATIONS FEATURES INTRODUCTION DESCRIPTION

1Valcor Scientific. Subminiature Teflon Valve. 2-Way, Normally Closed Solenoid Valve Model: SV20-1 APPLICATIONS FEATURES INTRODUCTION DESCRIPTION 1Valcor Scientific Subminiature Teflon Valve 2-Way, Normally Closed Solenoid Valve Model: SV20-1 APPLICATIONS Model SV20-1 is suitable for a broad range of light industrial applications, both new and retrofit.

More information

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm

2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm 2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions

More information

16mm miniature rocker solenoid valve with isolating diaphragm for special applications

16mm miniature rocker solenoid valve with isolating diaphragm for special applications 16mm miniature rocker solenoid valve with isolating diaphragm for special applications 2/2 and 3/2 way, and manifold mount Insensitive to contamination High pressure & back pressure rating of 145 PSI Low

More information

Direct-acting 2/2- or 3/2-way pivoted armature valve

Direct-acting 2/2- or 3/2-way pivoted armature valve 0330 Direct-acting 2/2- or 3/2-way pivoted armature valve Direct-acting, media-separated valve with diameter of up to DN 5 Maintenance-free pivoted armature technology Vibration-proof, block screwed coil

More information

Optional Features. Electrical. Optional Electrical Features. RedHat II Solenoid Options

Optional Features. Electrical. Optional Electrical Features. RedHat II Solenoid Options Optional Features Most optional electrical features shown here can be included on ASCO valves approved by UL, FM, and CSA. Identify the options you want by adding the appropriate prefix to the catalog

More information

WELCOME TO MAGNATROL

WELCOME TO MAGNATROL Catalog 6 BULLETIN 6-INDEX WELCOME TO MAGNATROL Process Control Solenoid Valves For Water Oil Air Gas Steam Cryogenics Vacuum Solvents Brine Oxygen Corrosive Fluids Magnatrol Valve Corp. Established 1936

More information

UNITED ELECTRIC 100 Series, Pressure, Vacuum, Diff. Pressure & Temp. Switches Adjustable Ranges 30 Vac to 5000 PSI, -180 to 650 o F

UNITED ELECTRIC 100 Series, Pressure, Vacuum, Diff. Pressure & Temp. Switches Adjustable Ranges 30 Vac to 5000 PSI, -180 to 650 o F UNITED ELECTRIC 100 Series, Pressure, Vacuum, Diff. Pressure & Temp. Switches Adjustable Ranges 30 Vac to 5000 PSI, -180 to 650 o F DESCRIPTION The 100 Series is a cost-effective pressure and temperature

More information

Solenoid Valves Catalogue

Solenoid Valves Catalogue Solenoid Valves Catalogue lcon Solenoid Valve Range US Keeping the World Flowing Contents Section Page Section Page Introduction 3 U Series 4 U Series Exd 6 U3/U33 Series 8 U3/U33 Series Exd 0 68 Series

More information

ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)

ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) BRASS OR STAINLESS STEEL BODY POLYMER OR METAL ACTUATOR HERION USA Inc. Valve Technology and Systems Brochure N-285 Multi-Accessory Polymer Head versions Increased

More information

3-Way. Direct Acting & Pilot Operated Quick Exhaust Valves 1/4" - 3/8" NPT. General Description: Applications: Electrical Characteristics:

3-Way. Direct Acting & Pilot Operated Quick Exhaust Valves 1/4 - 3/8 NPT. General Description: Applications: Electrical Characteristics: Direct Acting & Pilot Operated Quick Exhaust Valves 1/4" - 3/8" General Description: Direct Acting & Pilot Operated Quick Exhaust Valves are designed to provide a large orifice for quick exhaust. Increased

More information

2/2- and 3/2-way solenoid valve for aggressive fluids

2/2- and 3/2-way solenoid valve for aggressive fluids 2/2- and 3/2-way solenoid valve for aggressive fluids Type 0121 can be combined with Direct-acting, media-separated valve with diameter of up to DN 8 Maintenance-free pivoted armature technology Vibration-proof,

More information