PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G 3/4 - G1. Pressure. Pressure Maximum For DC Voltage. Flow Coeffient. Maximum. For AC Voltage. L/m.

Transcription

1 PULSE SOLENOID VALVES EPV 100 PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G 3/4 - G1 TECHNICAL SPECIFICATIONS and FEATURES ergized valve goes open position and pressurized air goes by in a while. This causes shock wave. The shock wave shock wave again. In order to create it, valve needs pressurized air which must be waiting inlet of the valve. This means pulse valves must be energized like an on-off signal. On position pressurized air goes by. Off position valve waiting for pressurized air will be created. Deposition Systems, Pneumatic Conveying Systems, Sand Blasters, Electrostatic Powder Coating Systems, Casting Factories, Cement Plants, Bunkers, Painting Booths, Industrial Filter Facilities Patented Effective Cleaning Coil Rotatable 360 LowerAir Consumption rate, effective cleaning, high quality, high performance, long life, high corrosion resistance, lower air consumption, low decibel noise level, ideal peak pressure, maximum security against icing, low flow and pressure loss, a special Special Diaphragm Custom Designed Enclosing Tube High Flow Rate Long Life 5 Milion Cycles and patented diaphragm, a fast and easy assembly-disassembly, original and patented enclosing tube design, high mechanical strength, low power loss, high-voltage tolerance, maximum inrush and hold power, peak pressure ratio greater %85, special design made having studied tank geometric. ELECTRICAL CHARACTERISTICS Continuous Duty: %100 ED Coil Insulation Class: H (0 C) Coil Impregnation: Polyester Fiber-Resin Glass Coil Encapsulation Material: Fiber Glass Reinforced Protection Degree: IP 65 (EN 60529) Electric Plug Connection: DIN poles connectors (DIN 43650) Connector Specification: ISO 4400 / EN , Form A, Spade plug (Cable mm) Electrical Safety: IEC335, EN , EN Standard s: V, 24V, 48V, 110V, 2V V, 24V, 48V, 110 V Tolerances: or DC %-10; %+10 Frequencie: 50 Hz Min and Max Ambient Tamp: -20; +70 MATERIALS Valve Body and Cover: Die Cast Aluminum Diaphragm/Seat Seal: Plunger Seal: H-NBR Enclosing Tube: Stainless Steel (AISI 4FR and AISI 4) Plunger: Stainless Steel (AISI 4FR) Springs: Stainless Steel (AISI 2) Shading Ring: Copper (%98 Cu ) Valve Seat: Aluminum Other Internal Metal Parts: Stainless Steel Cover Screws: Stainless Steel Internal and External O-rings: NBR EPV Connection and Port Orifice Flow Coeffient Seal Approximate Weight EPV 100 G mm L/m kg EPV / EPV t: f: / info@eskavalve.com -

2 PULSE SOLENOID VALVES EPV 100 PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G 3/4 - G1 OPTIONS DIAGRAM PULSE VALVE AIR COMSUMPTION DIAGRAM R (BSPT/ ISO 7-1], W (BSW/Whitworth), M (Metric) (155 C) id), connector with timer AIR COMSUMPTION ( m3 / One Pulse ) DN 20 DN 25 POWER CONSUMPTION Power Consumption Alternating Current (AC) Direct Current (DC) PRESSURE( BAR ) Inrush (VA) Holding (VA) Cold (W) Hot (W) ECO 10.AC.0 V ECO 10.DC.0 V ECO 10.AC V ECO 10.DC V ECO 10.AC V ECO 10.DC V ECO 10.AC V ECO 10.DC V ECO 10.AC.2 2V ECO 10.DC.2 2V APPLICATION PICTURES DIMENSIONS (mm) EPV t: f: / info@eskavalve.com -

3 PULSE SOLENOID VALVES EPV 100 PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G11/2 TECHNICAL SPECIFICATIONS and FEATURES Air and Inert Gas Pilot Operated Normally Closed G11/2 Thread (Female) C to C -20 C to 70 C,5 bar 100 ms 100 ms energized valve goes open position and pressurized air goes by in a while. This cause shock wave. The shock cause any shock wave again. İn order to create it, valve needs pressurized air which must be waiting inlet of by. Off position valve waiting for pressurized air will be created. Dust Collection Systems, Jet Pulse Filters, Dust Ventilation Systems, Dust Extraction Systems, Dust Deposition Systems, Pneumatic Conveying Systems, Sand Blasters, Electrostatic Powder Coating Systems, Casting Factories, Cement Plants, Bunkers, Painting Booths, Industrial Filter Facilities. flow rate, effective cleaning, high quality, high performance, long life, high corrosion resistance, lower air consumption, low decibel noise level, ideal peak pressure, maximum security against icing, low flow and pressure loss, a special and patented diaphragm, a fast and easy assembly-disassembly, original and patented enclosing tube design, high mechanical strength, low power loss, high-voltage tolerance, maximum inrush and hold power, peak pressure ratio greater %85, special design made having studied tank geometric, exhaust port protected by silencer and filter, valve with two diaphragm for large flow, fast on & off response, large exhaust area for reducing noise ELECTRICAL CHARACTERISTICS Continuous Duty: %100 ED Coil Insulation Class: H [0 C] Coil Impregnation: Polyester Fiber-Resin Glass Coil Encapsulation Material: Fiber Glass Reinforced Protection Degree: IP 65 (EN 60529) Electric Plug Connection: DIN poles connectors (DIN 43650) Connector Specification: IS0 4400/EN , Form A, Spade plug (Cable mm) Electrical Safety: IEC 335, EN , EN Standard s: V, 24V, 48V, 110V, 2V V, 24V, 48V, 110V Tolerances: or DC %-10; %+10 Freauencie: 50 Hz Min. and Max Amb. Tem: -20 ; 70 Patented Special Diaphragm MATERIALS Effective Cleaning Custom Designed Enclosing Tube Valve Body and Cover: Die Cast Aluminum Diaphragm/Seat Seal: Plunger Seal: H-NBR Coil Rotatable 360 High Flow Rate Enclosing Tube: Stainless Steel (AISI4FR and AISI4) Plunger: Stainless Steel (AISI 4FR) Springs: Stainless Steel (AISI 2) Shading Ring: Copper (%98 Cu) Valve Seat: Aluminum Other Internal Metal Parts: Stainless Steel Cover Screws: Stainless Steel Internal and External O-rings: NBR Lower Air Consumption Long Life 5 Milion Cycles EPV Connection and Port Orifice Flow Coeffient Seal Approximate Weight EPV 100 G mm L/m kg EPV / t: f: / info@eskavalve.com -

4 PULSE SOLENOID VALVES EPV 100 PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G11/2 OPTIONS DIAGRAM (BSPT/ ISO 7-1), W (BSW/Whitworth), M (Metric)... connector with timer AIR COMSUMPTION ( m3 / One Pulse ) PULSE VALVE AIR COMSUMPTION DIAGRAM DN POWER CONSUMPTION Power Consumption Alternating Current (AC) Direct Current (DC) PRESSURE( BAR ) Inrush (VA) Holding (VA) Cold (W) Hot (W) ECO 10.AC.0 V ECO 10.DC.0 V ECO 10.AC V ECO 10.DC V ECO 10.AC V ECO 10.DC V ECO 10.AC V ECO 10.DC V ECO 10.AC.2 2V ECO 10.DC.2 2V APPLICATION PICTURES DIMENSIONS (mm) EPV t: f: / info@eskavalve.com -

5 REMOTE CONTROL PULSE SOLENOID VALVES EPV 110 PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G 3/4 - G1 TECHNICAL SPECIFICATIONS and FEATURES Way Number: 2/2 s / Media: Air and Inert Gas Principle of Operation: Pilot Operated Function or Switching Type: Normally Closed Connection and Port s: G3/4-1 Connection Type: Thread (Female) : C to C Ambient : -20 C to 70 C Operating Differential : 0, 35 Operating : 8, 5 Allowable or Design :, 5 bar Opening Time: 60ms Closing Time: 100 ms When pressurized air comes to valve. Valve goes open position and pressurized air goes by in a while. This cause shock wave. The shock wave is clean up the dust and particles before again. İn order to create it, valve needs pressurized air which must be waiting inlet of the valve. cut the air supply. On position pressurized air goes by. Off position valve waiting for pressurized air will be created. Application: Dust Collection Systems, Jet Pulse Filters, Dust Ventilation Systems, Dust Extraction Systems, Dust Deposition Systems, Pneumatic Conveying Systems, Sand Blasters, Electrostatic Powder Coating Systems, Casting Factories, Cement Plants, Bunkers, Painting Booths, Industrial Filter Facilities Fast opening and closing, compact design, high reliability, high flow rate, effective cleaning, high quality, high performance, long life, high corrosion resistance, lower air consumption, low decibel noise level, ideal peak pressure, maximum security against icing, low flow and pressure loss, a special and patented diaphragm, a fast and easy assembly-disassembly, high mechanical strength, low power loss, peak pressure ratio greater %85, special design made having studied tank geometric, remote operation where electric supply not permitted pressure MATERIALS Patented Special Diaphragm Effective Cleaning High Flow Rate LowerAir Consumption Long Life 5 Milion Cycles EPV Valve Body and Cover: Die Cast Aluminum Diaphragm/Seat Seal: Valve Seat: Aluminum Cover Screws: Stainless Steel Internal and External O-rings: NBR Connection and Port Orifice Flow Coeffient Seal Approximate Weight EPV 110 G mm L/m kg EPV / EPV t: f: / info@eskavalve.com -

6 REMOTE CONTROL PULSE SOLENOID VALVES EPV 110 PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G 3/4 - G1 OPTIONS DIAGRAM PULSE VALVE AIR COMSUMPTION DIAGRAM (ANSI ), R (BSPT/ ISO 7-1), W (BSW/Whitworth), M (Metric)... C for ), connector with timer AIR COMSUMPTION ( m3 / One Pulse ) DN 20 DN PRESSURE( BAR ) APPLICATION PICTURES DIMENSIONS (mm) EPV t: f: / info@eskavalve.com -

7 REMOTE CONTROL PULSE SOLENOID VALVES EPV 110 PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G11/2 TECHNICAL SPECIFICATIONS and FEATURES s / Media: Air and Inert Gas Principle of Operation: Pilot Operated Function or Switching Type: Normally Closed Connection and Port s: G11/2 Connection Type: Thread (Female) : C to C Ambient : -20 C to 70 C Operating Differential : Operating : Allowable or Design :,5 bar Opening Time: 100 ms Closing Time: 100 ms Pulse valves are well known as an air shock valve and generally used with dust collectors. When pressurized air comes to valve. Valve goes open position and pressurized air goes by in a while. This cause shock wave. The shock wave is clean up the dust and particles before again. İn order to create it, valve needs pressurized air which must be waiting inlet of the inside or cut the air supply. On position pressurized air goes by. Off position valve waiting for pressurized air will be created. traction Systems, Dust Deposition Systems, Pneumatic Conveying Systems, Sand Blasters, Electrostatic Powder Coating Systems, Casting Factories, Cement Plants, Bunkers, Painting Booths, Industrial Filter Facilities high quality, high performance, long life, high corrosion resistance, lower air consumption, low decibel noise level, ideal peak pressure, maximum security against icing, low flow and pressure loss, a special and patented diaphragm, a fast and easy assembly-disassembly, high mechanical strength, low power loss, peak pressure ratio greater %85, special design made having studied tank geometric exhaust port protected by silencer and filter, valve with two diaphragm for large flow, fast on off response, large exhaust area for reducing noise, remote operation where electric supply not permitted of pressure Patented High Flow Rate MATERIALS Valve Body and Cover: Die Cast Aluminum Diaphragm/Seat Seal: Valve Seat: Aluminum Lower Air Consumption Long Life 5 Milion Cycles Cover Screws: Stainless Steel Internal and External O-rings: NBR Special Diaphragm Silencer and Filter EPV Connection and Port Orifice Flow Coeffient Seal Approximate Weight EPV 110 G mm L/m kg EPV / t: f: / info@eskavalve.com -

8 REMOTE CONTROL PULSE SOLENOID VALVES EPV 110 PILOT OPERATED, 2/2 WAY, NORMALLY CLOSED, G11/2 OPTIONS DIAGRAM (ANS ), R (BSPT/ ISO 7-1], W (BSW/Whitworth), M (Metric)... for ), connector with timer AIR COMSUMPTION ( m3 / One Pulse ) PULSE VALVE AIR COMSUMPTION DIAGRAM DN PRESSURE( BAR ) APPLICATION PICTURES DIMENSIONS (mm) EPV t: f: / info@eskavalve.com -