MINIATURE SOLENOID GENERAL SERVICE VALVES
|
|
|
- Robyn Wilkins
- 5 years ago
- Views:
Transcription
1 MINIATURE SOLENOID GENERAL SERVICE VALVES SERIES The Series solenoid valves are designed for use with air and inert gases Highly customizable construction that is suitable for a wide variety of gas applications Compact light-weight architecture and low power consumption make them ideal for portable medical devices Exceptional service lifetime over 100 million cycles that increases OEM instrument reliability Meets all relevant CE directives, and is RoHS compliant Typical applications include: Respiratory Therapy Patient Monitoring Compression Therapy (DVT) Robotic Pharmacy Dispensing 2/2 Normally Closed 3/2 Normally Closed Fluids* Temperature Range Seal Materials* Air or Inert Gas1 0 C to 60 C (32 F to 140 F) 1 filtered at 10µm * Ensure that the compatibility of the fluids in contact with the materials is verified NOTE: Additional constructions and options are available including alternate elastomers and orifice sizes. Minimum quantities apply. FKM NBR 2/2 NC Manifold Mount General Valve Information Body PBT, brass Seals NBR, FKM on request Others Stainless steel Response Time < 10ms Vacuum Rating -0.9 bar (13 psi) 2/2 NC Line Mount Electrical Characteristics Standard Voltages* Power Consumption 5 VDC, 12 VDC, 24 VDC 0.5 to 2.0 W * Other voltages on request NOTE: The solenoid valves are designed for continuous operation within the maximum ambient temperature limits 3/2 NC Pad Mount Insulation Class Coil Insulation Protection Ambient Temperature Range Electrical B ºC (ºF) VA ºC (ºF) 130 (266) IP30 (EN 60529) 0 to 60 (32 to 140) Lead wires 26 AWG or circuit board mount 3/2 NC Push-in Hose 95
2 Specifications Pressure Differential Flow Orifice Size bar (psi) Power Coefficient max. Coil mm (inches) Kv (m3/h) Cv min. air, inert gas W 2/2 NC - Normally Closed UNF Stud Manifold Mount, Brass (M) UNF Female In-Line, Brass (L) 3.17mm (0.125in) Push-in Hose Connecton PBT (B) Pad Mount, PBT (F) 0.8 (0.031) (-13) 3.4 (50) 0.5 RLM20xx30x 0.8 (0.031) (-13) 6.9 (100) 2.0 RHM20xx30x 1.30 (0.051) (-13) 1.0 (15) 0.5 RLM20xx50x 1.30 (0.051) (-13) 3.4 (50) 1.0 RMM20xx50x 1.30 (0.051) (-13) 6.9 (100) 2.0 RHM20xx50x 2.00 (0.079) (-13) 1.0 (15) 2.0 RHM20xx80x 0.8 (0.031) (-13) 3.4 (50) 0.5 RLL20xx30x 0.8 (0.031) (-13) 6.9 (100) 2.0 RHL20xx30x 1.30 (0.051) (-13) 1.0 (15) 0.5 RLL20xx50x 1.30 (0.051) (-13) 3.4 (50) 1.0 RML20xx50x 1.30 (0.051) (-13) 6.9 (100) 2.0 RHL20xx50x 2.00 (0.079) (-13) 1.0 (15) 2.0 RHL20xx80x 0.8 (0.031) (-13) 1.0 (15) 0.5 RLB20xx30x 0.8 (0.031) (-13) 3.4 (50) 1.0 RMB20xx30x 0.8 (0.031) (-13) 6.9 (100) 2.0 RHB20xx30x 1.30 (0.051) (-13) 0.7 (10) 0.5 RLB20xx50x 1.30 (0.051) (-13) 2.4 (35) 1.0 RMB20xx50x 1.30 (0.051) (-13) 4.8 (70) 2.0 RHB20xx50x 2.00 (0.079) (-13) 1.7 (25) 2.0 RHB20xx80x 0.8 (0.031) (-13) 1.0 (15) 0.5 RLF20xx30x 0.8 (0.031) (-13) 3.4 (50) 1.0 RMF20xx30x 0.8 (0.031) (-13) 6.9 (100) 2.0 RHF20xx30x 1.30 (0.051) (-13) 0.7 (10) 0.5 RLF20xx50x 1.30 (0.051) (-13) 2.4 (35) 1.0 RMF20xx50x 1.30 (0.051) (-13) 4.8 (70) 2.0 RHF20xx50x 2.00 (0.079) (-13) 1.7 (25) 2.0 RHF20xx80x How to Order RLM20 x x 30 x Voltages 4 = 5 VDC 6 = 12 VDC 7 = 24 VDC Sealing Material V = FKM B = NBR O = Oxygen service (FKM) Base Number (see Specifications table) Electrical H = Lead wires P = PCB pins (circuit board) Ordering Example: RLM204H30B = 2-way (normally closed), 5 VDC, manifold mount with 0.8mm (0.031in) orifice, 0.5 Watt, lead wires, NBR seals 96
3 Specifications Orifice Size Pressure Differential Flow Coefficient bar (psi) Power mm (inches) Kv (m3/h) Cv max. Coil min. air, inert gas W 3/2 NC - Normally Closed UNF Stud Manifold Mount, Brass (M) UNF Female In-Line, Brass (L) 3.17mm (0.125in) Push-in Hose Connecton PBT (B) Pad Mount, PBT (F) 0.8 (0.031) 1.0 (0.040) (-13) 3.4 (50) 0.5 RLM3xxx34x 0.8 (0.031) 1.0 (0.040) (-13) 6.9 (100) 2.0 RHM3xxx34x 1.30 (0.051) 1.3 (0.051) (-13) 1.0 (15) 0.5 RLM3xxx55x 1.30 (0.051) 1.3 (0.051) (-13) 3.4 (50) 1.0 RMM3xxx55x 1.30 (0.051) 1.3 (0.051) (-13) 6.9 (100) 2.0 RHM3xxx55x 2.00 (0.079) 1.3 (0.051) (-13) 1.7 (25) 2.0 RHM3xxx85x 0.8 (0.031) 1.0 (0.040) (-13) 3.4 (50) 0.5 RLL3xxx34x 0.8 (0.031) 1.0 (0.040) (-13) 6.9 (100) 2.0 RHL3xxx34x 1.30 (0.051) 1.3 (0.051) (-13) 1.0 (15) 0.5 RLL3xxx55x 1.30 (0.051) 1.3 (0.051) (-13) 3.4 (50) 1.0 RML3xxx55x 1.30 (0.051) 1.3 (0.051) (-13) 6.9 (100) 2.0 RHL3xxx55x 2.00 (0.079) 1.3 (0.051) (-13) 1.7 (25) 2.0 RHL3xxx85x 0.8 (0.031) 1.0 (0.040) (-13) 1.0 (15) 0.5 RLB3xxx34x 0.8 (0.031) 1.0 (0.040) (-13) 3.4 (50) 1.0 RMB3xxx34x 0.8 (0.031) 1.0 (0.040) (-13) 6.9 (100) 2.0 RHB3xxx34x 1.30 (0.051) 1.3 (0.051) (-13) 0.7 (10) 0.5 RLB3xxx55x 1.30 (0.051) 1.3 (0.051) (-13) 2.4 (35) 1.0 RMB3xxx55x 1.30 (0.051) 1.3 (0.051) (-13) 4.8 (70) 2.0 RHB3xxx55x 2.00 (0.079) 1.3 (0.051) (-13) 1.7 (25) 2.0 RHB3xxx85x 0.8 (0.031) 1.0 (0.040) (-13) 1.0 (15) 0.5 RLF3xxx34x 0.8 (0.031) 1.0 (0.040) (-13) 3.4 (50) 1.0 RMF3xxx34x 0.8 (0.031) 1.0 (0.040) (-13) 6.9 (100) 2.0 RHF3xxx34x 1.30 (0.051) 1.3 (0.051) (-13) 0.7 (10) 0.5 RLF3xxx55x 1.30 (0.051) 1.3 (0.051) (-13) 2.4 (35) 1.0 RMF3xxx55x 1.30 (0.051) 1.3 (0.051) (-13) 4.8 (70) 2.0 RHF3xxx55x 2.00 (0.079) 1.3 (0.051) (-13) 1.7 (25) 2.0 RHF3xxx85x How to Order Style B = 3.2mm (0.125in) push-in hose connection F = UNF female Voltages 4 = 5 VDC 6 = 12 VDC 7 = 24 VDC RLM3 x x x 30 x Sealing Material V = FKM B = NBR O = Oxygen service (FKM) Base Number (see Specifications table) Electrical H = Lead Wires P = PCB pins (circuit board) Ordering Example: RLM3B7P34V = 3-way (normally closed), 24 VDC, port 3 with push-in hose connection, manifold mount with 0.8mm (0.031in) orifice, 0.5 Watt, PCB pins, FKM seals Options Other seal materials available on request Other voltages and electrical connections available Oxygen service Other pipe connections available on request Installation The solenoid valves can be mounted in any position without affecting operation Threaded solenoid valves have 2 mounting holes in body 97
4 Dimensions: mm (inches) Dimensional Drawings 2- and 3-Way Pad Mount Solenoid Valve 2 x Ø 3.2mm (0.126in) mounting holes (for screws M3x20) lead wires 304.8mm (12in) long 7.9 (0.311) 15.2 (0.60) 7.8 (0.307) 16.5 (0.65) Hose I.D. 3.2mm (0.125in) (0.76) 44.2 (1.74) (2.00) Port (0.17) 7.1 (0.28) 2- and 3-Way Solenoid Valve with Push-in Hose 2 x Ø 3.2mm (0.126in) mounting holes (for screws M3x20) 7.9 Port (0.60) 2 front pins for mounting only 24.1 (0.95) Hose I.D. 3.2mm (0.125in) 2 rear pins for mounting and electrical connection Square pins 0.6mm x 0.6mm 13.3 (0.524) 44.2 (1.74) 20.2 (0.80) 4.40 (0.173) (2.00)
5 Dimensions: mm (inches) Dimensional Drawings 2- and 3-Way Line Mount Solenoid Valve lead wire 304.8mm (12in) long 36.6 (1.44) 19.1 (0.75) 12.7 (0.50) 6.4 (0.25) 2 x UNF port 1 & port (0.690) (0.76) Mounting holes 2 x 6-32 UNC 4.8mm (0.19in) deep 41.2 (1.62) 2- and 3-Way Manifold Mount Solenoid Valve Screw-in Mounting Pattern.75 (19.1) 3 x Ø 3.2mm (0.126in) for hook spanner wrench lead wire 304.8mm (12in) long PORT # UNF mounting stud (0.760) 4.8 (0.19) 35.6 (1.40) 99
MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D to 9.5 mm
MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D..65 to 9.5 mm U / Series 84 FEATURES Solenoid valve suitable for cutting off the flow of a fluid by pinch For sterile, aseptic, physiological
VSO - MI thermally compensated proportional valve
The VSO - MI is a miniature proportional valve specifically designed for medical device manufacturers and incorporates thermal compensation to provide precise flow control and stability over a wide operating
(Accessory, see ordering info) Wetted Materials
Series LX-Valve 8 mm Latching Solenoid Valve Typical Markets Portable Medical Equipment Environmental Monitoring Typical Applications Air & Oxygen Delivery Miniature Latching Pneumatic Solenoid Valve The
Miniature Pneumatic Solenoid Valve
10 mm Solenoid-Actuated Poppet Valve Typical Markets Respiratory Patient Therapy Typical Applications Oxygen Concentrators - Sieve bed switching/equalization - Oxygen delivery Deep Vein Thrombosis - Cuff
Series 11 Miniature Pneumatic Solenoid Valve 15mm Solenoid Valve
Series 11 Miniature Pneumatic Solenoid Valve 15mm Solenoid Valve Typical Applications Oxygen Conservers Oxygen Concentrators Compression Therapy Gas Chromatography Insufflators Medical & Analytical Gas
Miniature Pneumatic Solenoid Valve. Power: 0.5 Watt & 1.0 Watt. Not all power options are available in all models, see ordering info.
8 Ten-X 10 mm Normally Open/Closed Solenoid Valve Typical Applications Portable medical equipment Patient monitors Wound therapy Blood Pressure Monitoring Dialysis Product Specifications Mechanical Valve
Miniature Pneumatic Solenoid Valve
V Valve 15 mm Pneumatic Solenoid Valve Typical Applications Oxygen Conservers Flow control/shut-off valve Portable Medical Devices Product Specifications Mechanical Valve Type: /3 Port, Direct-acting poppet
Miniature Proportional Valve. Non-Thermally Compensated Proportional Valve
MD PRO Miniature Proportional Valve Non-Thermally Compensated Proportional Valve Typical Applications O 2 Concentrators/Conservers Ventilators Anaesthesia Delivery Pressure & Control Patient Monitors The
Miniature Proportional Valves Precision Fluidics
Precision Fluidics 2 Electronic Pressure Control When you partner with the global leader in motion and control technologies, expect to move your business and the world forward. From miniature solenoid
Miniature Solenoid Valves
Precision Fluidics Electronic Pressure Control When you partner with the global leader in motion and control technologies, expect to move your business and the world forward. From miniature solenoid valves
MINI-SOLENOID VALVES ISO (CNOMO, size 15) interface direct operated, pad mounting body connector size 15
MINI-SOLENOID VALVES ISO 58 (CNOMO, size 5) interface direct operated, pad mounting body connector size 5 NC / Series 0 FEATURES Compact, monobloc solenoid pilot valve with spade-plug connector type EN
Proportional Control Valves
Proportional Control Valves www.humphrey-products.com ProControl Proportional Valves Humphrey ProControl Proportional Valves provide superior proportional control performance, versatility, and value. Utilizing
Normally Open Miniature Proportional Valve Thermally Compensated Proportional Valve
Lone Wolf Typical Applications Blood Pressure Monitoring Vitreo Retinal Surgery Normally Open Miniature Proportional Valve Thermally Compensated Proportional Valve The Lone Wolf miniature proportional
VSO Thermally Compensated Proportional Valve
4 VSO Thermally Compensated Proportional Valve Typical Applications Gas Chromatography Mass Spectrometry Ventilators O 2 Concentrators/Conservers Anaesthesia Delivery & Monitors Pressure & Control Mass
Proportional Control Valves
Proportional Control Valves www.humphrey-products.com ProControl Proportional Valves Humphrey ProControl Proportional Valves provide superior proportional control performance, versatility, and value. Utilizing
Miniature Fluidic Products
Miniature Fluidic Products Analytical & Medical Technologies Isolation Valves Pinch Valves General Service Valves Proportional Valves Engineered Solutions www.asco.com Table of Contents Introduction Analytical
Miniature Solenoid Valves Precision Fluidics. PNEUMATIK. HYDRAULIK. E-ACHSEN. BILDVERARBEITUNG Komponenten & Systemintegration
Precision Fluidics PNEUMATIK. HYDRAULIK. E-ACHSEN. BILDVERARBEITUNG Komponenten & Systemintegration Electronic Pressure Control When you partner with the global leader in motion and control technologies,
Balanced Valve Series Multi-Purpose Direct-Acting Solenoid Valves
Balanced Valve Series Multi-Purpose Direct-Acting Solenoid Valves www.humphrey-products.com Humphrey Products Company P.O. Box 008 Kalamazoo, MI 4900 USA P.69.8.5500 F.69.8.4 BVSa-07 A privately owned
Miniature Proportional Valve Thermally Compensated Proportional Valve. Physical Properties
VSO Miniature Proportional Valve Thermally Compensated Proportional Valve Typical Applications Gas Chromatography Mass Spectrometry Ventilators O 2 Concentrators/Conservers Anaesthesia Delivery & Monitors
Servo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
Technical Data... 3 How to Order... 4 Dimensions... 5 Inline Mount Valve... 6 Manifold Dimensions and Part Numbers... 6
Table of Contents Minature Valve Series...3-14 RB Series...3-6 Technical Data.... 3 How to Order.... 4 Dimensions... 5 Inline Mount Valve.... 6 Manifold Dimensions and Part Numbers... 6 S Series...7-9
188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c
![188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c](/thumbs/73/69194897.jpg "188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c")
The 188 is a 3 Way, 10 mm wide micro solenoid valve designed to be used in fluid power applications. Using air or other neutral gasses the 188 can be used to pilot other valves or cylinders. ompact manifold
Solenoid Valves & Accessories. Incorporating Solenoid Valves in. Custom Products. Solenoid Operated. Custom Products
PNEUMADYNE, INC. Catalog 24 Phone 763-559-177 Fax 763-559-547 Incorporating Solenoid Valves in Custom Products For over 3 years, manufacturers have relied on Pneumadyne for innovative solutions to their
Pneutronics. Miniature Proportional Valves. Catalog PND-MPV-001/US January 2007
Pneutronics Miniature Proportional Valves January 2007 Non-Thermally Compensated Proportional Valve HF 200 Miniature Ultra High Flow Proportional Valve HF 200 is a high flow proportional valve that provides
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.8 Series PD directly operated solenoid valves /-way - Normally Closed (NC) Please note that all Series PD solenoid valves are supplied with direct current
Control Valve Specifications
Control Valve Specifications Available in two-way, three-way and four-way configuration and with port sizes from 10-32UNF through to 1/2"NPT. The N2V & N3V1 offering is a direct acting solenoid poppet
MINIATURE SOLENOID VALVES diaphragm mechanism, fl uid isolation threaded connections M5-1/8
EATURES Solenoid valves for medical analysers, biotechnology and chemical industry Any application where the fl uid may not come into contact with the electromagnetic control section of the solenoid valves
Miniature Solenoid Valves
Precision Fluidics 8 When you partner with the global leader in motion and control technologies, expect to move your business and the world forward. From miniature solenoid valves to highly integrated
2/2 3/2 4/2 SERIES Air Operated. General Service Air Operated Valves. Brass Body 1/4" to 2" NPT. Features. Construction.
General Service Valves Brass Body 1/" to 2" NPT 2/2 3/2 /2 Features Unique sealing member isolates pilot air pressure from mainline fluid Variations in pilot air pressure do not affect valve operation
Miniature Solenoid Valves
Miniature Solenoid Valves Our IPS Miniature Solenoid Valves offer precision performance under extreme conditions. Offered as 2-Way and 3-Way Valves with four internal body configurations and five seat
Miniature Inert PTFE Isolation Valves. Physical Properties Electrical Performance Characteristics
2-Way and 3-Way Solenoid Valves Typical Applications Reagent Control Solvent Management Aggressive Liquid Control Product Specifications Valve Type: Diaphragm Isolation Valve Valve Configuration: 3-Way
DIRECT OPERATED SOLENOID PILOT VALVES Product Index
DIRECT OPERATED SOLENOID PILOT VALVES Product Index ports/positions Function pipe connections * - instant fittings O.D. (mm) w - internal thread (ØG) x - external thread (ØG) n - pad mount : - pad mount,
S Series Technical Data...7 How to Order...8 Dimensions...8 Manifold Dimensions and Part Numbers...9
Miniature Valve Series............................................................3-14 RB Series..................................................................................3-6 Technical Data...................................................................................3
MINI-SOLENOID VALVES direct operated subbase mounted, CNOMO (15 mm width) connector size 15
MINI-SOLENOID VALVES direct operated subbase mounted, CNOMO ( mm width) connector size / Series 0 FEATURES Low consumption (0,W) Compact, monobloc solenoid pilot valve with spade-plug connector type AMP,8x0,
Balanced Valve Series Multi-Purpose Direct-Acting Solenoid Valves
Balanced Valve Series Multi-Purpose Direct-Acting Solenoid Valves www.humphrey-products.com Humphrey Products Company P.O. Box 008 Kalamazoo, MI 4900 USA P.69.8.5500 F.69.8.4 BVS-05 A privately owned US
2-Way/2 Position Valves
4 2-Way/2 Position Valves Two-way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. Two Types of Operations Apply Normally Closed (NC) Fluid is shut off when
Miniature coil (3W) encapsulated in synthetic material. Connection with 3-pin DIN type B plug. Degree of protection IP 65.
NAMUR 1/4 & 1/2 High Flow valves for actuator control Catalogue 4921/GB INDEX General Information...page 2 G 1/4 Series...page 4 G 1/2 Serie...page 6 Accessories...page 8 TECHNICAL DATA Function : Manual
Maximum Line Resistance vs. Length of Wire Max. Loop Resistance. Max. Wire Run 18AWG 7x26 Stranded (ft)
. W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased
Miniature Multimedia Valves
2 Inert Isolation PTFE 3-Way Solenoid Valve Series 1 The Series 1 diaphragm type valve has a low internal volume and rapid response time, which enables users to get readings quickly for their analysis.
2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
Data sheet. 2-way solenoid valves with Clip-on coils for neutral liquids and gases. January 2003 DKACV.PD.200.K B1472
Data sheet 2-way solenoid valves with Clip-on coils for neutral liquids and gases January 200 DKACV.PD.200.K.22 520B472 2 DKACV.PD.200.K.22 Danfoss A/S 0-200 Contents 2-way solenoid valves with Clip-on
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator. Installation Manual
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator Installation Manual Sentronic PLUS ASCO NUMATICS Sentronic PLUS Electronic Pressure Regulator Sentronic PLUS is a 3-way proportional valve with
4 N E X T G E N E R A T I O N
N X T G N R A T I O N lectronically nhanced Solenoid Valves and Stainless Steel Bodies /" - " NPT / 3/ / SRIS Next Generation Features Increase in DC pressure ratings to AC levels on all products (up to
SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1
SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1 NC 2/2 Series 220 FEATURES Small compact d valves particularly designed for hot water and steam, compatible with the seal materials
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.8 > Series A solenoid valves Series A directly operated solenoid valves /-way - Normally Closed (NC) and Normally Open (NO) 3/-way - Normally Closed (NC) and Normally Open (NO)»»
Proportional solenoid valve for pneumatic application V PR M
Proportional solenoid valve for pneumatic application 3 Product group V PR M Function 2/2 NC Proportional direct-acting Armature pressure tight up to 16 bar static pressure Short correction times High
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT
Air Actuated Ball Valves 2-Way, Lead Free Brass, Full Port 1/4 to 3 NPT SERIES Features Spring Return or Double Acting Actuators Lead Free Brass Ball Valve with ISO5211 direct mounting Full port design
Proportional solenoid valve for pneumatic application V PR M
Proportional solenoid valve for pneumatic application 3 Product group V PR M Function / NC Proportional direct-acting Armature space pressure tight up to 16 bar static pressure High linearity Quick response
Mechanical Specifications:
PFV Miniature s Low hysteresis and a consistent lift-off current make the PFV series of 2-way proportional valves ideal for OEM liquid and gas applications where repeatable, accurate performance is key.
3 Way/2 Position Valves
Way/ Position Valves Three way valves have three pipe connections and two orifices. When one orifice is open, the other is closed, and vice versa. They are commonly used to alternately apply pressure to
/2. Hot Water and Steam Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT ^ % )
888-87-6711 Normally Closed or Normally Open ot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT Features ot water service to 210 psi differential @ 210 F; sevice to 125 psi differential
PROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
Solenoid valves VZWP, servo-controlled
Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure
2/2 ^ % ) Normally Closed or Normally Open Hot Water and Steam Valves. Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT
Normally Closed or Normally Open Hot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT 2/2 Features Handle the challenges of high-temperature fluids PTFE and EPDM discs, stainless steel
4 qwer 2/2. Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 qwer Pilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Wide range of pressure ratings, sizes, and resilient materials provide
2/2 or 3/2-way Miniature Rocker Solenoid Valve
2/2 or 3/2-way Miniature Rocker Solenoid Valve Type 0127 can be combined with... For maximum chemical resistance requirements Compact design with mm width and Cv ratings up to 0.08 Proven reliability since
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT
Air Actuated 3-Way Ball Valves T-Port, Lead Free Brass, Full Port 1/4 to 2 NPT SERIES Features Full Port Lead Free Brass Diverter Valve Spring return or double acting actuators Ball Valve direct mounted
Constructions Suitable for -40 C to -50 C Ambient. 2, 3 and 4 Way Constructions Available. Brass, Aluminum and Stainless Steel Bodies
Constructions Suitable for - C to -5 C Ambient, 3 and Way Constructions Available Brass, Aluminum and Stainless Steel Bodies Air and Inert Gas Service INDEX General Service Valves -Way/ Position 8 Aluminum
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT
3-Way Brass Ball Valves L or T Port Design, 400 PSI WOG 1/4 to 3 NPT SERIES Features Standard Port 3-way L or T flow path Four seat design allows for full pressure at any port Hand lever operator Actuator
Miniature and Subminiature Solenoid Valves
Miniature and Subminiature Solenoid Valves Gems specializes in made-to-order fluidic systems, and a major segment of that activity includes the integration of miniature solenoid valves and manifold assemblies.
DE- OUT OUT DE- OUT OUT DE- SERIES MODEL E21 2-WAY NORMALLY OPEN CONDUIT HOUSG (700) 235 (0) 1 (3) (1) (700) 235 (0) 1 (3) (1) E21G7XC
SPECIFICATIONS 2-WAY 3-WAY EXPLOSION PROOF VALVES OPERATG CONDITIONS Media: Air, water, and other fluids, compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special
Sentronic LP IO-Link CLASS A 617 Series. Proportional Technology
Sentronic LP IO-Link CLASS A 617 Series Proportional Technology PROPORTIONAL PRESSURE CONTROL: 617 SERIES SENTRONIC LP IO-LINK VERSION ASCO NUMATICS Sentronic LP The Sentronic LP is a highly efficient
Series PD directly operated solenoid valves
> Series PD solenoid valves CATALOGUE > Release 8.7 Series PD directly operated solenoid valves New /-way Normally Closed (NC) Note: all Series PD /-way solenoid valves are basically in DC. To operate
Solenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
Pressure Transmitters
Transmitters Wetted parts are all made of stainless steel for high resistance to chemicals Stainless steel diaphragm welded with casing No seals and thus low leakage rate even with difficult gases High
% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power
4.55 Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 low wattage coil Standard ambient
Solenoid Valve ST-IA-series
2/2-WAY INDIRECT OPERATED NORMALLY CLOSED Solenoid Valve ST-IA-series The ST-IA is an indirect operated 2/2-way solenoid valve. The valve is normally closed. The solenoid valves have an orifice of 13 to
10 MM MINIATURE VALVES
1 MM MINIATURE VALVES LATCHING 1 MM MINIATURE VALVES Clippard s Latching series features a careful balance of forces through the precise placement of a permanent magnet in the valve core produces a bi-stable
Compact design suitable for use in reduced mounting space. CONTROL > Directly operated solenoid valves Series PN GENERAL DATA
> Directly operated solenoid valves Series PN Directly operated solenoid valves Series PN 3/-way Normally Closed (NC). The solenoid valves can be mounted on a single base (with M5 ports) as well as on
3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
VAS VAS VACUUM SWITCH SPECIFICATIONS. DIMENSIONS (mm)
VACUUM SWITCHES VAS VACUUM SWITCH Diaphragm vacuum switch Compact size Lightweight Inch port sizes 5/32, 1/4 & 5/16 Metric port sizes 4, 6 & 8mm Fully adjustable VAS 10 06 Series Body Size 10 Vacuum Port
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 612 can be combined with... DN
2/2 and 3/2 way Flipper Solenoid Valve, with hermetic isolation of fluid. Low dead volume, low internal volume. High chemical resistance
2/2 and 3/2 way Flipper Solenoid Valve, with hermetic isolation of fluid Low dead volume, low internal volume High chemical resistance Low power consumption Internal contours easily flushed Optional impulse
NIFW % # ) Air and Inert Gas Non-Incendive Field Wiring Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT
Air and Inert Gas Non-Incendive Field Wiring Valves Brass, Aluminum, or Stainless Steel Bodies /" to " NPT / 5/ 5/3 Features solenoid enclosures to provide corrosion resistance in harsh environments Designed
Indirect servo-operated 2/2-way solenoid valves Type EV220W 10 - EV220W 50, NBR and EPDM versions
Data sheet Indirect servo-operated 2/2-way solenoid valves Type EV220W 10 - EV220W 50, NBR and EPDM versions EV220W is a range of compact indirect servo- operated 2/2 way solenoid valves with connections
HN B G1/US B G2/US B G3
HN B G/US B G/US B G Compact direct acting, port solenoid valve air, water,, low vacuum (. x 0 Pa (abs)) CONTENTS Safety precautions port solenoid valve HNB NC (normally closed) type USB NC (normally closed)
Solenoid Valve ST-SA-series
2/2-WAY SEMI-DIRECT OPERATED NORMALLY CLOSED Solenoid Valve ST-SA-series The ST-SA is a semi-direct operated 2/2-way solenoid valve. The valve is normally closed. The body material can be brass or stainless
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
16mm miniature rocker solenoid valve with isolating diaphragm for special applications
16mm miniature rocker solenoid valve with isolating diaphragm for special applications 2/2 and 3/2 way, and manifold mount Insensitive to contamination High pressure & back pressure rating of 145 PSI Low
nickel-plated brass - PBT technopolymer HNBR, FKM stainless steel
CATALOGUE > Release 8.7 > Series A solenoid valves Series A directly operated solenoid valves /-way, 3/-way NC and NO. Monostable - bistable (with magnetic memory) Ports M5 - G1/8 - R1/8 - cartridge ø4
4 qwer. Main Pulse Valves Dust Collector 2/2 SERIES H OME PAGE P RINT. High Flow. Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT.
4 qwer High Flow Main Pulse Valves Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT NC 2/2 SERIES Features Specially designed for reverse jet-type dust collector systems. High flow Cv s to 140 for effective
Miniature and Subminiature Solenoid Valves
Miniature and Subminiature Solenoid Valves Gems specializes in made-to-order fluidic systems, and a major segment of that activity includes the integration of miniature solenoid valves and manifold assemblies.
4 qwer. Steam and Hot Water Valves 2/2 SERIES. Hot Water/ Steam. Features. Construction. Nominal Ambient Temperature Ranges: Electrical.
qwer Normally Closed or Normally Open and Hot Water Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Handle the challenges of high-temperature fluids. PTFE and EPDM discs,
Series P directly operated solenoid valves
> Series P solenoid valves CATALOGUE > Release 8.7 Series P directly operated solenoid valves 3/-way NC and NO. The solenoid valves can be mounted on a single base (with M5 ports) as well as on manifolds
Solenoid Valve DF-SB-series
2/2-WAY SEMI-DIRECT OPERATED NORMALLY OPEN Solenoid Valve DF-SB-series The DF-DB is a semi-direct operated 2/2-way solenoid valve. The valve is normally open. The solenoid valves have an orifice of 16
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 6124 can be combined with...
% # ) Air and Inert Gas Intrinsically Safe Valves 2/2 3/2 4/2 5/2 5/3 SERIES. Brass, Aluminum, or Stainless Steel Bodies 1/4" to 1" NPT
4 Air and Inert Gas Intrinsically Safe Valves Brass, Aluminum, or Stainless Steel Bodies /4" to " NPT / 3/ 4/ 5/ 5/3 Features Intrinsically safe solenoid enclosures to provide corrosion resistance in harsh
ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)
ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2) BRASS OR STAINLESS STEEL BODY POLYMER OR METAL ACTUATOR HERION USA Inc. Valve Technology and Systems Brochure N-285 Multi-Accessory Polymer Head versions Increased
Assisted lift operated 2/2-way solenoid valves Type EV250B
Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to
Pressure switches hex 24
Pressure switches Normally open or normally closed, maximum voltage 42 V Low-cost solution for mechanical pressure monitoring. Stable switching point even after long use and high load. Switching point
Series 1, 2 & 6 Options selector. Port 4 = 1/8" NPT 5 = 1/4" NPT (Series 6* only) 7 = #10-32 UNF 8 = 1/4-28 UNF
KIP Isolation Valves Ideal for control of corrosive and aggressive media Elastomer diaphragm provides protection from aggressive, corrosive, and gritty media Isolation valves can be equipped with a low
Solenoid Valves. Options/Accessories - ASCO offers a wide variety of accessories and optional features to meet your specific application requirements.
Solenoid Valves The solenoid is an electromagnetic part of a valve, comprised of a coil, coretube, core and enclosure. ASCO Redhat brand offers the worlds largest selection of 2-, 3- and 4-way solenoid
% # ) Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT
Intrinsically Safe & Non-Incendive Field Wiring Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NT / 3/ / 5/ 5/3 Features Available in different coil terminations H Class coil construction Designed
Diaphragm : Plastic Metal Globe : Plastic Metal Manifold Pinch Valve
Diaphragm : Plastic...................... 156 Metal...................... 158 Globe : Plastic...................... 160 Metal...................... 164 Manifold..................... 170 Pinch Valve.......................
2/2 ^ % ) Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 ilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" 8210 2-AY Features ide range of pressure ratings, sizes, and resilient materials provide long service life
Control & Power, Inc
Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder