contents of this product guide

Transcription

1 contents of this product guide ODE ANGLE SEAT - 2/2 Way N.C. 21IA4 to 21IA9 - Stainless Steel ODE SOLENOID - 2/2 Way N.C. 21A2K/21A3K - Direct Acting A5K/21AK - Direct Acting JN1R0 - Direct Acting H7KB/21HKB - Pilot Control WA3/21WA4 - Pilot Control HT3K/21HT5K - Combined Operation 13-21HF6K/21HFK - Combined Operation ODE SOLENOID - 2/3 Way N.C. - Direct Acting 31A1A-R - Direct Acting JN1XPV - Direct Acting A3A/31A2A - Direct Acting CAR WASH/MANIFOLD TYPE ODE SOLENOID - 2/2 Way N.C. Modular 4743K0V120 - Pilot Control DRINK/COFFEE DISPENSER TOTAL SEPARATION - 2/2 Way N.C. 21K72KR to 26K72KR - Direct Acting K72RR to 26K72RR - Direct Acting 27-2 Coffee Machine Product Index 29 ODE S 5Watt, Watt, Watt 30 3-WAY CAR WASH DRINK/COFFEE DISPENSER S This product guide is a representative overview of the ODE Liquid Valve offer. Stainless range also available on request. Find out more by contacting MVP or go to the website

2 ODE ANGLE SEAT - 21IA4 to 21IA9 2 way N.C. Direct Acting Stainless Steel ANGLE SEAT Flow direction below seat, angle seat pilot valve. Pneumatically actuated, high flow rate due to the bodys angle seat configuration. Anti water-haer functioning with entry below seat. Pneumatic controlled valve with stainless steel body. Pneumatic actuator (360 rotation). Optical position indicator. Can be used with back pressure for gases (the back pressure must not pass the functioning max pressure - see MOPD chart). Self triing packing gland - maintenance free. Can be setup in all positions. PIPES: G1/2 - G2 USE: Automation, Heating, Water, Hot Water, Steam(10 C), Aggressive, Food Fluids VALVE Fluid Temperature -10 C +10 C Environment Temp. -10 C +60 C Material Stainless Steel AISI Series 316 PTFE Packing Gland PTFE, FKM PILOT ACTUATOR Fluid Dry air or lubricated, gas and neutral fluids Fluid Temerature Max +60 C Polyamide 66 with 30% glass Gaskets NBR Actuator 70 ANGLE SEAT Kv Actuator pilot Differential Max.a llowable pressure (bar) Weight pressure (bar) pressure ISO2 2/1 l/mn minm ax minm ax PS (bar)k g G1 /2 21I A4T15G C ,4 G3 /4 21I A5T20G C ,5 G1 21I A6T25G C , G1 1/4 21I A7T32G C ,4 25 G1 1/2 21I AT40G C ,5 2,7 G2 21I A9T50G C ,9 Note : Available on request - Pilot Valve 31A2AV20+BDA. Together with male thread nipple G1/4 - G1/4. Material compatability with the fluids to be checked. The ODE reserves the right to carry out technical and aesthetic modifications without prior notification. A B C D G 1/2 206, SW 27 17,7 15,4 SW , G 3/4 211,7 SW 32 1,6 21,9 SW ,7 75,5 19 G1 220,1 SW , 25,1 SW , G1 1/4 235,9 SW ,3 2,5 SW 41 13, G1 1/2 23,9 SW ,0 31,0 SW ,2 G2 247, SW ,7 37,5 SW , ,5 E H L T CE Approval ( Equipment Directive 97/23/CE) for S.V. 21IA7-21IA9 1 MAC VALVES - ODE VALVES - 2 WAY - STAINLESS ANGLE SEAT - MAC VALVES - ODE VALVES - 2 WAY - STAINLESS ANGLE SEAT - 2

3 ODE SOLENOID - 21A3K to 21A2K 2 way N.C. Direct Acting Direct acting S.V. for interception of fluids compatible with the Minimum operational pressure is not required. reliability and duration. PIPES: G1/ - G1/4 USE: Automation, Heating VALVE W - 13* BDA - BDS - BSA 155 C (class F) BDP 160 C (high temp.) BDF 10 C (class H) SDH 10 C (class H) 12W - 13 UDA 155 C (class F) W - 13 GDH 10 C (class H) * Explosion-proof housing for coils with electrical connections EN on request. Max. allowable pressure (PS) 40 bar With coil class F and high temperature - 10 C + 60 C With coil class H - 10 C + 0 C HIGHLIGHTED ITEMS ARE EX STOCK For seals other than FKM replace the letter V with the ones corresponding to the other seals. i.e. 21A2KE20. 21A2K TABLE G 1/4 min M.O.P.D. cst El /min (watt) bar AC bar DC bar 21A2K V ~ 2 1,5 1, A2K V20 37~ A2K V2 5 2,5 3, ~ A2K V30 3, A2K V4 5 4,5 6, A2K V5 5 5, , Standard: V=FKM On request:b=nbr E=EPDM ORIFICE: <3 Insert slot Stainless steel AISI series 300 >3 Mineral oils (2 E),gasoline V=FKM (fluoroelastomer) -10 C +0 C gas oil, fuel oils (7 E) B= NBR (nitrile rubber ) - 10 C + 90 C Air, inert gas, water E=EPDM (ethylene-propylene) -10 C +0 C Water, steam HIGHLIGHTED ITEMS ARE EX STOCK For seals other than FKM replace the letter V with the ones corresponding to the other seals. i.e. 21A3KE20. Connector Pg 9 or Pg Complete plunger: For orifice <3 R4506/V For orifice >3 R4509/V 3. Complete armature tube: R A3K TABLE G 1/ mi M.O.P.D. cst E l/min (watt) bar AC bar DC bar 21A3K V1 51 2~ 2 1,5 1, A3K V2 03 7~ A3K V2 5 2,5 3, A3K V30 53 ~ A3K V4 5 4,5 6, Note: Also available with brass body without lead. DIMENSIONS: W Type 21A3KV G 1/ 21A2KV G 1/4 POWER ABSORPTION DIMENSIONS Inrush Hold TYPE D E F VA ~ VA ~ B 30 W 25,5 S W U W G MAC VALVES - ODE VALVES - 2 WAY - MAC VALVES - ODE VALVES - 2 WAY - 4

4 ODE SOLENOID - 21A5K to 21AK 2 way N.C. Direct Acting Direct acting S.V. for interception of fluids compatible with the Minimum operational pressure is not required. The materials used and the tests carried out ensure maximum reliability and duration. PIPES: G3/ - G1/2 USE: Automation, Heating VALVE W - 13 BDA - BDS - BSA 155 C (class F) BDF - BDV 10 C (class H) 12W - 13 UDA 155 C (class F) W - 13 GDH - GDV 10 C (class H) Max. allowable pressure (PS) 40 bar With coil class F and high temperature - 40 C + 60 C With coil class H - 40 C + 0 C T=PTFE Orifice 2. Complete plunger: R451234/T 3. Complete armature tube: R T=PTFE (polytetrafluorethylen) -40 C +10 C Water, Steam KIT: KT130KT55-A=2+3 5 MAC VALVES - ODE VALVES - 2 WAY - MAC VALVES - ODE VALVES - 2 WAY - 6

5 ODE SOLENOID - 21JN1R0 2 way N.C. Direct Acting Direct acting S.V for interception of fluids compatible with the Minimum operational pressure is not required. reliability and duration. PIPES: G1/ USE: Automation, Heating S: 2.5W - 10 LBA 155 C (class F) 5W - 10 LBA 155 C (class F) LBF 10 C (class H) Brass Standard: V=FKM On request:b=nbr ORIFICE: Brass Connector Please request MOULDING AND BOBBIN ARE MADE WITH 100% VIRGIN MATERIAL Max. allowable pressure (PS) 40 bar With coil class F and high temperature - 10 C + 60 C With coil class H - 10 C + 0 C 2. Complete plunger: R451101/V 3. Complete armature tube: R Gasket O-Ring: R990597/V MANTENANCE KIT: KT100R0V25-FJ = V=FKM (fluoroelastomer) -10 C +0 C Mineral oils (2 E),gasoline gas oil, fuel oils (5E) B= NBR (nitrile rubber ) - 10 C + 90 C Air, inert gas, water For seals other than FKM replace the letter V with the ones corresponding to the other seals. i.e. 21H7KV120. minm.o.p.d. cst El /min (watt) bar AC bar DC bar G 1/ 21JN1R0 V12 21JN1R0 V23 12 ~ 2 37 ~ 5 1,2 2,3 1 2,3 2,5 5 2, , Note: Also available with brass body without lead. W POWER ABSORPTION Inrush VA ~ Hold VA ~ 2,5 W W MAC VALVES - ODE VALVES - 2 WAY - MAC VALVES - ODE VALVES - 2 WAY -

6 ODE SOLENOID - 21H7K to 21HK 2 way N.C. Pilot Control S.V. with pilot control with interception of fluids compatible with the Minimum operational pressure of 0.1bar is required. reliability and duration. PIPES: G3/ - G1/2 USE: Automation, Heating VALVE W - 13 BDA - BDS - BSA 155 C (class F) BDP 160 C (high temp.) BDF 10 C (class H) SDH 10 C (class H) 12W - 13 UDA 155 C (class F) W - 13 GDH 10 C (class H) Max. allowable pressure (PS) 20 bar With coil class F and high temperature - 10 C + 60 C With coil class H - 10 C + 0 C Standard: V=FKM On request: B=NBR E=EPDM ORIFICE: Connector Pg 9 or Pg Complete plunger: R45024/V 3. Complete armature tube: R Complete diapragm: R450916/V MANITENANCE: KTGOH7KV12=2+4 V=FKM (fluoroelastomer) -10 C +0 C Mineral oils (2 E),gasoline gas oil B= NBR (nitrile rubber) A ir, inert gas, water E=EPDM (ethylene-propylene) -10 C +0 Water, low pressure steam HIGHLIGHTED ITEMS ARE EX STOCK For seals other than FKM replace the letter V with the ones corresponding to the other seals. i.e. 21H7KV120. minm.o.p.d. cst El /min (watt) bar AC bar DC bar 10 G 3/ 21H7K V ~ , G 1/2 21HK B Note: Also available with brass body without lead. Type 21H7KV120 G 3/ 21HKV120 G 1/2 POWER ABSORPTION DIMENSIONS W Inrush Hold TYPE DE F VA ~ VA ~ W 25,5 B3 0 S W U W G MAC VALVES - ODE VALVES - 2 WAY - PILOT CONTROL MAC VALVES - ODE VALVES - 2 WAY - PILOT CONTROL 10

7 ODE SOLENOID - 21WA3KO to 21WA4KO 2 way N.C. Pilot Control S.V. with pilot control with interception of fluids compatible with the A minimum operational pressure of 0,2 bar is required. reliablility and duration. PIPES: G3/ - G1/2 USE: Automation, Heating S: W - 13 BDA - BDS - BSA 155 C (class F) BDP 160 C (high temp.) BDF 10 C (class H) SDH 10 C (class H) Standard: B=NBR On request: V=VKM ORIFICE: Connector Please request Max. allowable pressure (PS) 20 bar With coil class F and high temprature - 10 C + 60 C With coil class H - 10 C + 0 C Gaskets B=NBR (nitrile rubber) Temperature - 10 C + 90 C Air, inert gas, water 2. Complete plunger: R4506/B 3. Complete armature tube: R Gasket O-Ring: R990300/B 5. Complete Diagram: R45216/B KIT: KT130K B 30 - A = 2+3 MAINTENANCE KIT: KTGWA3K0 B 13 = V=FKM (fluoroelastomer) - 10 C +0 C mineral oils (2 E),gasoline gas oil HIGHLIGHTED ITEMS ARE EX STOCK For seals other than FKM replace the letter V with the ones corresponding to the other seals. i.e. 21WA3KOV130. O min M.O.P.D. cst Em m (l/mn) watt bar AC bar DC bar G 3/2 21WA3KOV130 1WA3K0B ~ 2 13 G 1/22 21WA4KOV130 1WA4K0B , Note: Also available with brass body without lead. Type 21WA3K0B130 G 3/ 21WA4K0B130 G 1/ 2 A B C D POWER ABSORPTION IMENSIONS Inrush Hold TYPE D E F W VA ~ VA ~ B3 0 W 25, S MAC VALVES - ODE VALVES - 2 WAY - PILOT CONTROL MAC VALVES - ODE VALVES - 2 WAY - PILOT CONTROL 12

8 ODE SOLENOID - 21HT3K to 21HT5K 2 way N.C. Combined Operation COMBINED OP. Combined operation S.V. for interception of fluids compatible with Minimum operational pressure is not required. reliability and duration. PIPES: G3/ - G3/4 USE: Automation, Vacuum Packaging, Heating VALVE W - 13 BDA - BDS - BSA 155 C (class F) BDF - BDV 10 C (class H) 12W - 13 UDA 155 C (class F) W - 13 GDH - GDV 10 C (class H) Max. allowable pressure (PS) 16 bar With coil class F - 10 C + 60 C With coil class H - 10 C + 0 C M edium Y=NBR (nitrilerubber) +P A (polyamide) V=FKM+ PA (fluorelastomer+poliamiyde) - 10 C + 90 C - 10 C +0 C Air, gasoline, fuelo ils, inert gas, water Mineral oils (2 E), gasoline gas oil Standard: Y=NBR+PA On request: V=FKM+PA ORIFICE: Connector Pg 9 or Pg Complete armature tube without gasket: G3/-G3/4 R Gasket O-ring: R990000/B 4.Complete diaphragm with plunger: G3/ R452126/B G12-3/4 R452125/B 5. Gasket O-ring: G3/-G3/4 R MAINTENANCE KIT: G3/ KTGHT3K0Y11=4+5 G1/2-G3/4 KTGHT4K0Y16=4+5 COMBINED OP. For seals other than FKM replace the letter V with the ones corresponding to the other seals. E.I. 21HT3K0V110. G3/ 21HT3K0Y110 G 1/2 G 3/4 21HT4K0Y160 21HT5K0Y160 min M.O.P.D. cst E l/mn (watt) bara Cb ar DC bar ,5 12 ~ , Type 21HT3K0Y110 G3 / 21HT4K0Y160 G1 /2 21HT5K0Y160 G3 /4 13 MAC VALVES - ODE VALVES - 2 WAY - COMBINED OPERATION MAC VALVES - ODE VALVES - 2 WAY - COMBINED OPERATION A 50 B C TYPE POWER ABSORPTION W Hold Inrush VA ~ VA ~ DIMENSIONS D E F B, U G

9 ODE SOLENOID - 21HF6K to 21HFK 2 way N.C. Combined Operation COMBINED OP. Combined operation S.V. for interception of fluids compatible with Minimum operational pressure is not required. reliability and duration. PIPES: G1 - G1 1/2 USE: Automation, Heating VALVE W - 13 BDA - BDS - BSA 155 C (class F) BDF - BDV 10 C (class H) 12W - 13 UDA 155 C (class F) W - 13 GDH - GDV 10 C (class H) Max. allowable pressure (PS) 16 bar With coil class F - 10 C + 60 C With coil class H - 10 C + 0 C Standard: V=FKM On request: E=EPDM, B=NBR ORIFICE: Connector Pg 9 or Pg Complete armature tube: R Gasket O-ring: R990000/B 4. Gasket O-ring: G1 R990153/V G1 1/4 - G1 1/2 R992061/V 5.Complete diaphragm with plunger: G1 R452269/V G1 1/4 - G1 1/2 R452395/V 6. Gasket O-ring: G1 R990002/V COMBINED OP. Gaskets Temperature B=NBR (nitrile rubber) -10 C + 90 C Air, inert gas, water E=EPDM (ethylene-propylene) V=FKM (fluoroelastomer) -10 C + 0 C -10 C + 0 C Water, steam Mineral oils (2 E), gasoline gas oil MAINTENANCE KIT: G1 KTGHF5K0V20=4+5+6 G1 1/4 - G1 1/2 KTGHF7K0V35=4+5 For sealso ther than FKMr eplace the letter V w ith the ones correspondingt ot he other seals. E.I. 21HF6K0B250. Maxv iscosity minm.o.p.d. cst E l/mn (watt) bara Cb ar DC bar 5 G1 21HF6K0V G1 1/ 4 21HF7K0V ~ G1 1/ 2 21HFK0V CE Approval ( Equipment Directive 97/23/CE) 21HF6K0V250 G HF7K0V350 G11/ HFK0V400 G1 1/2 B, U G MAC VALVES - ODE VALVES - 2 WAY - COMBINED OPERATION MAC VALVES - ODE VALVES - 2 WAY - COMBINED OPERATION 16 Type A B C TYPE POWER ABSORPTION WH old Inrush VA ~ VA ~ DIMENSIONS D E F

10 ODE SOLENOID - 31A1A-R 3 way N.C. Direct Acting Direct acting S.V. for interception of fluids compatible with the A minimum operational pressure is not required. reliablility and duration. PIPES: Subplate mounting USE: Hot water, Steam (10 C) S: W - 13 BDA - BDS - BSA 155 C (class F) BDP 160 C (high temp.) BDF 10 C (class H) SDH 10 C (class H) Max. allowable pressure (PS) 40 bar With coil class F and high temprature - 40 C + 60 C With coil class H - 40 C + 0 C Standard: R=Ruby ORIFICE: Insert slot Stainless steel AISI series 300 Connector Please request 2. Complete plunger: R Complete armature tube: R450944/AL 4. Gasket O-Ring: R990002/S KIT: KT130 AR 30 - A = WAY R=RUBY - 40 C + 10 C Hot water, Steam SUBPLATE MOUNTING minm.o.p.d. cst E l/mn (watt) bar AC bar DC bar 31A1AR10 1* 0, A1AR15 1,5* 1, A1AR20 2* A1AR25 2,5* 3,2 6 6 Note: * 3rd way exhaust= 2,5 Also available with brass body without lead. The use of rigid sealings usually implies a slight leakage, limited within 2scc/min at the pressure of 1 bar. The ODE reserves the right to carry out technical and aesthetic modifications without prior notification. 3-WAY POWER ABSORPTION DIMENSIONS W Inrush Hold TYPE D E F VA ~ VA ~ B 30 W 25, S MAC VALVES - ODE VALVES - 3 WAY - MAC VALVES - ODE VALVES - 3 WAY - 1

11 ODE SOLENOID - 31JN1XP Hose Connection Exhaust 3 way N.C. Direct Acting Direct acting S.V. for interception of fluids compatible with the A minimum operational pressure is not required. reliablility and duration. PIPES: G1/ USE: Automation, Heating S: 5W - 10 LBA 155 C (class F) LBF 160 C (class H) Mouding and bobbin are made by 100% virgin material Max. allowable pressure (PS) 40 bar With coil class F and high temprature - 10 C + 60 C With coil class H - 10 C + 0 C Brass Standard: V=FKM ORIFICE: Brass Connector Please request 2. Complete plunger: R /V 3. Complete armature tube: R Gasket O-Ring: R990597/V KIT: KT100XPV25 - IJ = WAY Mineral oils (2 E),gasoline V=FKM (fluoroelastomer) - 10 C + 0 C gas oil, fuel oils (5 E) mi n M.O.P.D. cst E l/mn (watt) bar AC bar DC bar 31JN1XPV12 12 ~ 2 1,2* 1 15 G 1/ JN1XPV23 37 ~ 5 2,3* 2,3 5 Note: * 3rd way exhaust= 1,7 Also available with brass body without lead. - 3-WAY W POWER ABSORPTION DIMENSIONS Inrush Hold TYPE D E F VA ~ VA ~ 5 W L 22 27,5 39,5 19 MAC VALVES - ODE VALVES - 3 WAY - MAC VALVES - ODE VALVES - 3 WAY - 20

12 ODE SOLENOID - 31A3A to 31A2A 3 way N.C. Direct Acting Direct acting S.V. for interception of fluids compatible with the A minimum operational pressure is not required. reliablility and duration. PIPES: G1/ - G1/4 USE: Automation, Heating S: W - 13* BDA - BDS - BSA 155 C (class F) BDP 160 C (high temp.) BDF 10 C (class H) SDH 10 C (class H) *Explosion proof housing for coils with electrical connections EN on request. Max. allowable pressure (PS) 40 bar With coil class F and high temprature - 10 C + 60 C With coil class H - 10 C + 0 C Standard: V=FKM On request: B=NBR ORIFICE: Insert slot Stainless steel AISI series 300 Connector Please request 2. Complete plunger: R450675/V 3. Complete armature tube: R KIT: KT130 AV 30 - A = WAY V=FKM (fluoroelastomer) -10 C +0 C Mineral oils (2 E),gasoline gas oil B=NBR (nitrile rubber ) - 10 C + 90 C A ir, inert gas, water HIGHLIGHTED ITEMS ARE EX STOCK For seals other than FKM replace the letter V with the ones corresponding to the other seals. i.e. 31A3AB15. G 1/ G 1/4 mi n M.O.P.D. cst E l/mn (watt) bar AC bar DC bar 31A3AV10 1* 0, ~ 2 31A3AV15 1,5* 1, A3AV20 37 ~ 5 2* A3AV25 2,5* 3, ~ 7 31A3AV30 3* A2AR10 1* 0, ~ 2 31A2AV15 1,5* 1, A2AV20 37 ~ 5 2* A2AV25 2,5* 3, ~ 7 31A2AV30 3* Note: * 3rd way exhaust= 2,5 Also available with brass body without lead. Type 31A3AV G 1/ 31A2AV G 1/4 3-WAY W POWER ABSORPTION DIMENSIONS Inrush Hold TYPE D E F VA ~ VA ~ B S 32 W 25,5 21 MAC VALVES - ODE VALVES - 3 WAY - MAC VALVES - ODE VALVES - 3 WAY - 22

13 ODE SOLENOID K0V120 CAR WASH 2 way N.C. Modular w/pilot Control Direct acting S.V. for interception of fluids compatible with the A minimum operational pressure of 0.1bar is required. reliablility and duration. PIPES: Inlet Flange - G1/2 Outlet USE: CAR WASH S: W - 13 BDA-BDS-BSA 155 C (class F) BDP 160 C (high temp.) BDF 10 C (class H) UDA 155 C (class F) Mouding and bobbin are made by 100% virgin material Max. allowable pressure (PS) 20 bar With coil class F and high temprature - 10 C + 60 C With coil class H - 10 C + 0 C Standard: V=FKM ORIFICE: Connector Please request 2. Complete plunger: R45124/V 3. Complete cover with armature tube: R Complete diaphram: R450916/V 5. Guarnizione: O-Ring: 9906/V 6. Screw M5x16: Nut M5x4: R99046 KIT: KTG0H7KV12 = 2+4 V=FKM (fluoroelastomer) -10 C +0 C Water CAR WASH MODULAR WITH PILOT CONTROL mi n M.O.P.D. cst E l/mn (watt) bara Cb ar DC bar FLANGE 4743K0V ~ , Note: Available on request and with minimum quantities. SPECIAL ITEM - NOT STANDARD CAR WASH MODULAR WITH PILOT CONTROL POWER ABSORPTION DIMENSIONS W Inrush VA ~ Hold VA ~ TYPE D E F W 25,5 B W U MAC VALVES - ODE VALVES - CAR WASH - 2 WAY - MODULAR WITH PILOT CONTROL MAC VALVES - ODE VALVES - CAR WASH - 2 WAY - MODULAR WITH PILOT CONTROL 24

14 ODE SOLENOID - 21K72KR to 26K72KR 2 way N.C. Flow Regulation/Direct Acting Bank S.V. for automatic drink dispensers. A minimum operational pressure is not required. reliablility and duration.. PIPES: Next page - (A-B-D-I-L-R) USE: AUTOMATIC DRINK DISPENSERS S: W - 13 BDA-BDS-BSA 155 C (class F) BDP 160 C (high temp.) BDF 10 C (class H) Mouding and bobbin are made by 100% virgin material With coil class F and high temprature - 10 C + 60 C With coil class H - 10 C + 0 C S=VMQ (silicone) + 2 C +100 C Water mi n M.O.P.D. cst E l/mn (watt) bar AC bar DC bar 21K72KRS See 22K72KRS connection 23K72KRS types * 0 0,3 0,3 overleaf 24K72KRS (A-B-D-I-L-R) 25K72KRS K72KRS Note: *Flow rate with head of 0 = 2,5L/min PSU (Polysulphone) Lower body PSU (Polysulphone) Lower body clamping device PA (Polyaide) Armature tube Bellow membrane Standard: S=VMQ On request: W=MFQ DRINK/COFFEE DISPENSERS 2. Complete plunger: R452491/S 2a.Bellow membrane: R45249/S 3. Complete armature tube: R Lower body assembly: R a.Gasket O-Ring: R990052/S 4b.Flow setting screw with O-Ring: R Lower body clamping device: R KIT: KR130KRS90-L3 = 2+3 DRINK/COFFEE DISPENSERS NSF CERTIFIED W POWER ABSORPTION Inrush Hold TYPE VA ~ VA ~ W 25,5 B 25 MAC VALVES - ODE VALVES - DRINK/COFFEE DISPENSERS MAC VALVES - ODE VALVES - DRINK/COFFEE DISPENSERS 26

15 ODE SOLENOID - 21K72RRS to 26K72RR 2 way N.C. Flow Regulation/Direct Acting Bank S.V. for automatic drink dispensers. A minimum operational pressure is not required. reliablility and duration.. PIPES: Next page - (A-B-D-I-L-R) USE: AUTOMATIC DRINK DISPENSERS S: 12W ED 50% - 10 ICA 155 C (class F) Mouding and bobbin are made by 100% virgin material - 10 C + 60 C S=VMQ (silicone) + 2 C +100 C Water See connection types overleaf (A-B-D-I-L-R) 21K72RRS K72RRS K72RRS K72RRS K72RRS K72RRS mi n M.O.P.D. cst E l/mn (watt) bara C bard C bar * 12 ED 50% 0 0,3 0,3 Note: * FLOW RATE WITH HEAD OF 0 = 2,5 l/min. Available on request and with minimum quantities. PSU (Polysulphone) Lower body PSU (Polysulphone) Lower body clamping device PA (Polyaide) Armature tube Bellow membrane Standard: S=VMQ On request: W=MFQ DRINK/COFFEE DISPENSER 2. Complete plunger: R452236/S 2a.Bellow membrane: R452224/S 3. Complete armature tube: R Lower body assembly: R a.Gasket O-Ring: R990052/S 4b.Flow setting screw with O-Ring: R c. Lower body clamping device: R KIT: KR130RRS90-L2 = 2+3 DRINK/COFFEE DISPENSER NSF CERTIFIED W POWER ABSORPTION Inrush Hold TYPE VA ~ VA ~ 12 W I 27 MAC VALVES - ODE VALVES - DRINK/COFFEE DISPENSERS amac VALVES - ODE VALVES - DRINK/COFFEE DISPENSERS 2

16 COFFEE MACHINE PRODUCTS ODE S - 2 way valves small and large - 3 way valves small and large - Vibrator pumps - Total separation valves for instant machines - Coffee head valves both flanged and threaded - Hot and cold water valves - Steam valves - Spares, coils and plugs 5 WATT S - 22 x 10 LBA - Molding material: PA - Black Polyamide Class F (155ºC) Coffee/Head Valves - Industry standard sub plate mount - Or 1/ or 1/4 ports - Viton or ruby seats - Various orifice sizes - High temperature C 31A1A-R (pg17&1) 31A3A/31A2A (pg21&22) WATT S - 30 x 13 BDA - Molding material: PA - Black Polyamide Class F (155ºC) Compact size Steam, Hot and Cold water valves - 2 and 3 way functions - 1/ ports - Viton seats - Various orifice sizes - High temperature coil 21JN1R0 (pg7&) 31JN1XP (pg19-20) 12 WATT S - 36 x 13 UDA - Molding material: EP - Black Epoxy Resin Class F (155ºC) Standard size Steam, Hot and Cold water valves - 2 and 3 way function - 1/ or 1 4 ports - Viton or ruby seats - High temperature coil 21A3K (pg3&4) 31A3A (pg21&22) WATT S - 52 x 13 GDH - Molding material: EP - Black Epoxy Resin Class H (10ºC) Pump vibrator type - Interchangeable with other brands - High performance - Rubber mounts available (for more info contact MVP) Total separation valves - for Instant coffee machines CODE POWER VOLTAGE DESCRIPTION APPROVALS 5W12D 5 WATT 12 VDC COMPACT CE 5W24D 5 WATT 24 VDC COMPACT CE mpmdin Square DIN Plug for and WATT Coils DRINK/COFFEE DISPENSER - Interchangable with other brands - Can be single or multiple valves - Various coil voltages - Integral flow controls Valve Spares - Plunger compact 2 way - Plunger compact 3 way - Plunger standard 2 way Viton - Plunger standard 2 way Ruby - Plunger standard 3 way Viton - Coil Standard valve watt - Coil compact valve 5 watt - Plug compact coil rectangular - Plug standard coil square 21K72KR (pg25&26) 21K72RR (pg27&2) - Plunger standard 3 way Ruby - Armature tube compact 2 way - O-ring for 2 way armature tube - Armature tube standard 3 way with hose tail exhaust 5Watt (pg30) Square DIN (pg30) Watt (pg30) Rectangular DIN (pg30) 5W24A 5 WATT 24 V 50Hz COMPACT CE 5W110A 5 WATT 110 V 50Hz COMPACT CE UL 5W230A 5 WATT 230 V 50Hz COMPACT CE 12D WATT 12 VDC STANDARD 24D WATT 24 VDC STANDARD CE 24A WATT 24 VDC STANDARD CE 110A WATT 110 V 50Hz STANDARD CE 240A WATT 240 V 50Hz STANDARD CE Other voltages and power absoptions available on demand and for q Other voltages and power absoptions available on demand and for quantities. 400A WATT 400 V 50Hz STANDARD W12D WATT 12 VDC HI PERFORMANCE W24D WATT 24 VDC HI PERFORMANCE CE W24A WATT 24 V 50Hz HI PERFORMANCE CE W110A WATT 110 V 50Hz HI PERFORMANCE CE W220A WATT 220 V 50Hz HI PERFORMANCE CE 29 MAC VALVES - ODE VALVES - DRINK/COFFEE DISPENSERS MAC VALVES - ODE VALVES - S 30 mpmrec Rectangular Plug for 5 WATT Coils Nominal Voltage DC +10% -5% Tolerances: AC +10% -15% S

17 design & screenprint